Características clínicas y radiográficas de reabsorciones radiculares externas / Clinical and radiographic characterization of external root resorption

Introducción La siguiente revisión bibliográfica se realizó con el propósito de reconocer las características clínicas y radiográficas que deben ser evaluadas para el diagnóstico de las reabsorciones radiculares externas incluyendo también sus tratamientos. Metodología Se llevó a cabo una búsqueda en las bases de datos MEDLINE/PubMed, Cochrane Library y Google Scholar bajo el término , incluyendo estudios experimentales y revisiones bibliográficas desde 2010 a 2022 en español e inglés, incluyendo finalmente 17 artículos. Resultados Los resultados obtenidos señalaron que cada tipo de reabsorción radicular externa presenta características clínicas específicas que las diferencian. Estas diferencias son: para la reabsorción externa inflamatoria la vitalidad pulpar negativa; para la reabsorción externa de reemplazo la ausencia de movilidad y percusión metálica; para la reabsorción externa cervical una coloración rosada de la corona; la reabsorción externa superficial no presenta ningún tipo de sintomatología clínica y la reabsorción de colapso apical transitorio presenta un cambio de coloración transitorio. Conclusión Las reabsorciones radiculares externas requieren un diagnóstico preciso y temprano. Se debe realizar un examen clínico con énfasis en sondaje, coloración, movilidad y pruebas de vitalidad.

Introduction The following bibliographic review was carried out with the purpose of recognizing the clinical and radiographic characteristics that must be considered in the diagnosis of external root resorption, including treatments. Methods A bibliographic search was carried out in PubMed/Medline, Cochrane Library and Google Scholar databases under the term "external root resorption", from 2010 to 2022 in Spanish and English. Experimental studies and bibliographic reviews were selected, and finally 17 articles were included. Results The results obtained indicated that each type of resorption presents specific clinical characteristics that differentiate them, these are: for external inflammatory resorption a negative pulp vitality; for replacement external resorption the absence of mobility and metallic percussion; for cervical external resorption a pink coloration of the crown; superficial external resorption does not present any type of clinical symptoms and transient apical collapse presents a transient change in color. Conclusion External root resorptions require accurate and early diagnosis. A clinical examination should be performed with emphasis on the following: probing, coloration, mobility, and vitality tests.

Comparative in vitro analysis of the antifungal activity of different calcium silicate-based endodontic sealers

Aim: This study aimed to perform an in vitro comparative analysis of the antifungal activity of different calcium silicate-based endodontic sealers against three fungal species. Methods: The antifungal properties of three calcium silicate-based sealers were tested: Bio-C Sealer, Cambiar a Sealer Plus BC, and MTA-Fillapex. Two commonly used sealers were used as controls: AH Plus and Endomethasone. An agar diffusion test was performed to analyze the antifungal activity of the sealers against Candida albicans, Candida glabrata, Candida tropicalis, and a mixed microbial culture medium. The results were analyzed using ANOVA (p <0.05). Results: Endomethasone exhibited the highest inhibition against all strains examined, maintaining a consistent level of inhibition throughout 7 days. MTA-Fillapex demonstrated the best performance among the calcium silicate-based sealers for the three fungal species (p < 0.05), maintaining stable values over the 7 days, surpassing that of Endomethasone. Nevertheless, MTA-Fillapex only exhibited antimicrobial effect against the mixed culture for the first 24 hours, and no antimicrobial activity was observed at 48 hours, being surpassed by all tested sealers (p < 0.05). Conclusion: Of all silicate-based sealers tested, only MTA-Fillapex exhibited promising antifungal activity. Nevertheless, care must be taken when extrapolating these results, as MTA-Fillapex exhibited poor antimicrobial activity when tested in mixed microbial cultures

Prevalence and reasons for referrals to the Endodontics Specialty Clinic at the Piracicaba Dental School

Abstract Dental referrals to the Endodontics Specialty Clinic (ESC) are routine owing to the complexity of endodontic treatments. To obtain a better prognosis for treatment, students/dentists must perceive their technical limits. This study sought to investigate the referrals of patients to the ESC from different clinics of the Piracicaba Dental School, State University of Campinas - SP, Brazil, and check: a) the demographic profile of patients and the most commonly affected tooth; b) the clinic with the largest number of referrals; c) the reasons for referrals; d) the complexity of the cases; e) and the difficulty in assessing the referred cases based on the classification provided by the American Association of Endodontists (AAE) and Souza-Filho. The study sample consisted of patients' electronic dental referral records from February 2015 to June 2019. A total of 1,707 patients were referred to the ESC during the study period, and 62.4% were female. Lower molars were the most frequently involved teeth (34.8%), and 60.7% of the cases were referred due to the presence of root curvature. The AAE classification showed prevalence of highly difficult cases (71.3%), whereas Souza-Filho classification demonstrated a high rate of class III cases (85.8%). This study highlights the difficulties encountered by undergraduate students before or during endodontic treatments, reinforcing the need for clear criteria for selecting cases appropriate for each education level, thus improving endodontic treatment prognosis.

Prevalencia de conductos en C de segundos molares mandibulares evaluados en tomografía de haz cónico / Prevalence of C-ducts of Mandibular Second Molars Evaluated on Cone Beam Tomography

Introducción: El conocimiento adecuado de la configuración de conductos radiculares es fundamental en endodoncia; la evaluación tomográfica permite una correcta evaluación de su disposición radicular. Objetivo: Determinar la prevalencia de conductos en C de segundos molares mandibulares, evaluados en tomografía de haz cónico. Métodos: Se realizó un estudio descriptivo y de corte transversal; la muestra estuvo conformada por 200 segundos molares mandibulares permanentes de una población peruana, observadas en tomografías cone beam, donde se registró la presencia del conducto en C, su configuración según la clasificación de Fan y el sexo del paciente. Resultados: La prevalencia de la configuración radicular en forma de C en segundos molares inferiores fue del 65,5 por ciento; según la Clasificación de Fan se observó mayor prevalencia en el tercio cervical del conducto radicular el tipo C1 con 85,7 por ciento; en el tercio medio el tipo C2 con 42,9 por ciento; a nivel apical fue el tipo C3C con 72,1 por ciento; según el sexo, el 65,2 por ciento de los conductos en C correspondió al femenino. Conclusión: La prevalencia de los conductos en C de los segundos molares mandibulares evaluados en tomografías de haz cónico fue de 65,5 por ciento con mayor predominio en el sexo femenino. La evaluación tomográfica permite una mejor identificación y configuración interna de los conductos radiculares(AU)

Introduction: Adequate knowledge of the configuration of root canals is fundamental in endodontics; tomographic evaluation allows a correct assessment of their radicular arrangement. Objective: To determine the prevalence of C-shaped canals in mandibular second molars, evaluated by cone beam tomography. Methods: A descriptive and cross-sectional study was carried out; the sample consisted of 200 permanent mandibular second molars from a Peruvian population, observed in cone beam tomography, where the presence of the C-shaped canal, its configuration according to Fan's classification and the patient's gender were recorded. Results: The prevalence of the C-shaped root canal configuration in lower second molars was 65.5 percent; according to the Fan classification, the highest prevalence was observed in the cervical third of the root canal, type C1 with 85.7 percent; in the middle third, type C2 with 42.9 percent; at the apical level it was type C3C with 72.1 percent; according to gender, 65.2 percent of the C-shaped canals corresponded to females. Conclusion: The prevalence of C-shaped canals in mandibular second molars evaluated in cone beam tomography was 65.5% with a higher predominance in the female gender. The tomographic evaluation allows a better identification and internal configuration of the root canals(AU)

Accuracy of the integrated electronic apex locator in locating simulated perforation under various irrigating solutions in an in vitro study

Aim: This study's objective was to assess the accuracy of the integrated apex locator in identifying artificial root canal perforations in the presence of saline, chlorhexidine, sodium hypochlorite, QMix, and MTAD. Methods: The root canals of 60 single-rooted extracted human teeth were perforated artificially at a point 10 mm away from the root apex. After measuring the actual lengths up to the perforation point, the teeth were then put within an alginate mould for measurements using an integrated apex locator. Using a #20 K-file in the presence of NaCl, CHX, MTAD, NaOCl, and QMix, an electronic apex locator was used to measure the perforations electronically in accordance with the manufacturer's instructions. Between the measurements, each canal was dried with paper points after being irrigated with distilled water. The accuracy of all the readings was calculated at ± 0.5 mm. Statistical analyses were performed using the Z-test. Results: In comparison to the MTAD, NaOCl, and Qmix, saline and chlorhexidine scored more readings in the ± 0.5 mm range of the perforation site, and the difference was statistically significant. Conclusion: The most precise electronic measurements of artificial perforation were obtained in the presence of chlorhexidine or saline

Análisis radiográfico comparativo de tratamientos endodónticos: su posible aporte en la identificación forense / Comparative radiographic analysis of endodontic treatments: its possible contribution to forensic identification

Introducción: La identificación por cotejo de regis-tros odontológicos representa una metodología científicamente consolidada. La estrategia más co-mún reside en la comparación de odontogramas impresos o digitalizados, aunque se ha cuestionado cierta subjetividad al asentar dicha información. Los recursos imagenológicos constituyen una evidencia más confiable y objetiva, reduciendo el sesgo iden-tificatorio. La obtención de radiografías post mor-tem (PM) reproduciendo en lo posible las técnicas que han generado las imágenes ante mortem (AM) recuperadas, otorga una eficaz modalidad compa-rativa, aumentando su valor probatorio. Materiales y Métodos: Se efectuó la comparación entre radio-grafías panorámicas y periapicales tomadas a 10 pacientes atendidos en un consultorio particular de la ciudad de Quilmes, Provincia de Buenos Aires, don-de se visualizaban tratamientos de endodoncia. Los registros de ambas técnicas de imágenes se realiza-ron sobre los mismos sujetos entre los años 2010 y 2022. Se cotejaron 11 radiografías periapicales y 10 panorámicas, procediéndose a la digitalización de la totalidad de la muestra. Se clasificaron las imágenes de cada persona conforme a la fecha de obtención de las mismas. A las más antiguas se las catalogó con el color verde, representando el material AM, mien-tras que las más recientes se marcaron en color rojo, constituyendo la información PM. Resultados: Teniendo en cuenta los criterios estipulados por la Junta Americana de Odontología Forense (ABFO) se identificaron positivamente 7 casos estudiados, 2 fueron catalogados como identificación posible, en tanto que 1 se clasificó como insuficiente. No se re-gistraron exclusiones. Conclusión: Los tratamientos endodónticos podrían suministrar información pon-derable en procesos de identificación humana en virtud de la escasa probabilidad de sufrir alteracio-nes morfológicas y estructurales por su estratégica localización intradentaria, otorgando posibilidades concretas de establecer la identidad categórica de sujetos desconocidos (AU)

Introduction: Identification by comparison of dental records represents a scientifically consolidated methodology. The most common strategy lies in the comparison of printed or digitised odontograms, although certain subjectivity has been questioned when recording said information. Imaging resources constitute more reliable and objective evidence, reducing identification bias. Obtaining post-mortem (PM) radiographs reproducing the techniques that have generated the recovered ante-mortem (AM) images, provides an effective comparative modality, increasing its evidentiary value. Materials and Methods: A comparison was made between panoramic and periapical radiographs taken to 10 patients treated in a private office in the city of Quilmes, Province of Buenos Aires, where endodontic treatments were visualized. The records of both imaging techniques were carried out on the same subjects between 2010 and 2022. 11 periapical and 10 panoramic radiographs were collected, and the entire sample was digitized. The images of each person were classified according to the date they were obtained. The oldest ones were cataloged with the color green, representing the AM material, while the most recent ones were marked in red, constituting the PM information. Results: Taking into account the criteria stipulated by the American Board of Forensic Odontology (ABFO), 7 cases studied were positively identified, 2 were classified as possible identification, while 1 was classified as insufficient. No exclusions were recorded. Conclusion: Endodontic treatments could provide valuable information in human identification processes due to the low probability of suffering morphological and structural alterations due to their strategic intradental location, providing concrete possibilities of establishing the categorical identity of unknown subjects (AU)

Frecuencia y tipología del segundo conducto mesiovestibular en primeros molares superiores / Frequency and typology of the second mesiobuccal canal in maxillary first molars

Objetivos: Evaluar mediante microscopia quirúrgica la presencia del segundo conducto mesiovestibular (MV2) en el piso de la cámara pulpar de los primeros molares superiores, determinar su abordabilidad, establecer el calibre de lima que llegó al tercio apical y tipificar radiovisiográficamente su morfología se-gún la clasificación de Weine. Materiales y métodos: Se utilizaron 48 primeros molares superiores huma-nos extraídos. Sé tomaron radiovisografías preope-ratorias (Carestream 5200) en sentido orto radial y mesio-distal. Se realizó apertura y se localizó entra-da del MV2 con microscopio quirúrgico (Newton MEC XXI, Argentina) a 16 x. Se cateterizó MV1 y MV2 con limas tipo K #10 y #15 (Dentsply Maillefer). Se cortó raíz distovestibular para mejorar visualización ra-diovisográfica. Se tomó conductometria en sentido mesio-distal para establecer la tipología. Se compa-raron frecuencias y porcentajes mediante test de Chi-cuadrado con corrección de Yates, prueba exac-ta de Fisher y test z para diferencia de proporcio-nes. Se calcularon intervalos de confianza 95% para porcentajes mediante método score de Wilson. Re-sultados: El 54% (26 casos) presentó MV2. De los 26 MV2, el 77% (20 casos) fueron abordables, porcen-taje significativamente mayor al 23% no abordable (z=3,62; P<0,05). Al hacer cateterismo, hubo asocia-ción significativa entre tipo de conducto (MV1 y MV2) y calibre de lima que llegó al tercio apical (Chi-cua-drado=29,12; gl=1; P<0,05). La tipología I (58%) fue significativamente mayor que las tipologías II (21%) y III (21%) (P<0,05 para ambas comparaciones). Con-clusión: El alto porcentaje de piezas que presentó MV2 evidencia la importancia clínica de detectarlo y tratarlo correctamente. Dado el alto porcentaje de piezas donde fue abordable, se concluye que el clíni-co debe tener conocimiento, destreza y la tecnología necesaria para poder abordarlo. Si bien la tipología I (58%) fue la más encontrada, cuando el MV2 termina en foramen independiente (tipo III), su omisión puede conducir al fracaso del tratamiento (AU))

Objectives: To evaluate by surgical microscopy the presence of second mesiobuccal canal (MB2) in the pulp chamber floor of the maxillary first molars, determine its approachability, establish the caliber of the file that reached the apical third, and radiographically typify its morphology according to Weine ́s classification. Materials and methods: 48 extracted human maxillary first molars were used. Preoperative radiovisographies (Carestream 5200) were taken in ortho-radial and mesio-distal direction. Coronal access was made and the entrance of MB2 was located with a surgical microscope (Newton MEC XXI, Argentina) at 16x. MB1 and MB2 were catheterized with K files #10 and #15 (Dentsply Maillefer). Distobuccal root was cut to improve radiovisographic visualization. Conductometry was taken in mesio-distal direction to establish the typology. Frequencies and percentages were compared using Chi-square test with Yates correction, Fisher's exact test and z test for difference in proportions. 95% confidence intervals were calculated for percentages using Wilson score method. Results: 54% (26 cases) presented MB2. Of the 26 MB2, 77% (20 cases) were approachable, a significantly higher percentage than those not approachable (z=3.62; P<0.05). When performing catheterization, there was a significant association between type of canal (MB1 and MB2) and file caliber that reached the apical third (Chi-square=29.12; df=1; P<0.05). Typology I (58%) was significantly higher than typologies II (21%) and III (21%) (P<0.05 for both comparisons). Conclusion: The high percentage of specimens that showed MB2 evidence the clinical importance of detecting and treating it correctly. Given the percentage of pieces where it was approachable (77%), it is concluded that the clinician must have the knowledge, skill and necessary technology to be able to approach it. Although typology I (58%) was the most found, when MB2 ends an independent foramen (type III), its omission can lead to treatment failure (AU)

Evaluación de la filtración apical al utilizar dos selladores biocerámicos / Evaluation of apical leakage when using two bioceramic sealers

Objetivo: Evaluar con técnica de diafanización el gra-do de filtración apical al utilizar dos selladores bio-cerámicos y la técnica de cono único con taper ex vivo. Materiales y métodos: Se utilizaron 60 premola-res inferiores humanos uniradiculares extraídos. La instrumentación se realizó con lima Primary 25/.07 (WaveOne Gold, Dentsply Maillefer), según protocolo del fabricante. Se irrigó con NaOCl 2,5% y EDTAC 17%. Para la obturación, la muestra se dividió aleatoria-mente en 4 grupos (n=15). Grupo 1: Cono único y Bio C Sealer. Grupo 2: Cono único y MTA Fillapex. Grupo control negativo: no se obturó. Grupo control positi-vo: Cono único y AH Plus. En todas las muestras se aplicaron dos capas de esmalte para uñas en toda la superficie dentaria con excepción del tercio apical y del grupo control positivo, que se esmaltó en su tota-lidad. Medio de filtración: tinta china negra por difu-sión pasiva. Se diafanizó con técnica de Robertson. Se usó programa AutoCad 2022, para medir filtración en milímetros lineales. Los datos se analizaron me-diante prueba de Kruskal-Wallis seguida por compa-raciones post hoc empleando el método de Conover (p<0,05, significativo). Resultados: La filtración con Bio C Sealer, MTA Fillapex, control negativo y control positivo tuvo una media (mínimo-máximo) de 0 (0-2), 1 (0-3), 6 (2-12) y 0 (0-0); sin diferencias significativas entre Bio C Sealer y MTA Fillapex (p>0,05), ni entre Bio C Sealer y control positivo (p>0,05); pero con di-ferencias significativas entre MTA Fillapex y control positivo (p<0,05), y entre control negativo y cual-quiera de los otros tres grupos (p<0,05). Conclusión: La obturación con Bio C Sealer lograría un nivel de sellado similar al que se obtiene con el control po-sitivo; mientras que la obturación con MTA Fillapex produciría un sellado ligeramente menos efectivo que el control positivo. Sin embargo, la filtración no variaría sustancialmente entre obturaciones con Bio C Sealer y MTA Fillapex (AU)

Objective: To evaluate the degree of apical filtration with diaphanization technique, using two bioceramic sealers and single cone technique with taper, ex vivo. Materials and methods: 60 extracted single-root human mandibular premolars were used. The instrumentation was carried out with primary file 25/.07 (WaveOne Gold, Dentsply Maillefer), according to the manufacturer's protocol. Irrigation was done with 2.5% NaOCl and 17% EDTAC. For obturation, the sample was randomly divided in 4 groups (n=15). Group 1: Single cone and Bio C Sealer. Group 2: Single cone and MTA Fillapex. Negative control group: it was not obturated. Positive control group: Single cone and AH Plus. In all samples, two layers of nail polish were applied to the entire tooth surface with exception of apical third and the positive control group, which was completely glazed. Filtration medium: black Chinese ink by passive diffusion. It was diaphanized with Robertson technique. AutoCad 2022 program was used to measure filtration in linear millimeters. Data were analyzed using Kruskal-Wallis test, followed by post hoc comparisons using Conover method (p < 0.05, significant). Results: Filtration with Bio C Sealer, MTA Fillapex, negative control and positive control had a mean (minimum-maximum) of 0 (0-2), 1 (0-3), 6 (2-12) and 0 (0-0); no significant differences between Bio C Sealer and MTA Fillapex (p > 0.05), nor between Bio C Sealer and positive control (p > 0.05); but with significant differences between MTA Fillapex and positive control (p < 0.05), and between negative control and any of the other three groups (p < 0.05). Conclusion: Obturation with Bio C Sealer would achieve a level of sealing similar to obtained with the positive control; while obturation with MTA Fillapex would produce a slightly less effective seal than the positive control. However, filtration would not vary substantially between fillings with Bio C Sealer and MTA Fillapex (AU)

Protocolo para la medición de espacios vacíos dentro de la obturación endodóntica con microtomografía / A protocol for the measurement of voids within the endodontic filling with microtomography

La microtomografía es un estudio que utiliza la ra-diación X para obtener imágenes de tamaños de mi-lésimas de milímetros y de alta resolución. Las imá-genes 2D son procesadas por diferentes softwares para lograr obtener volúmenes capaces de ser ana-lizados tridimensionalmente. La microtomografía es el estudio de elección a la hora de evaluar caracte-rísticas muy pequeñas con gran precisión. La obtu-ración endodóntica buscar lograr un sellado que no tenga espacios vacíos dentro de la masa de obtura-ción. Esto es importante debido a que los poros pue-den permitir, si están en contacto con la pared den-tinaria, la entrada de microorganismos al conducto radicular. El objetivo de este trabajo fue describir el procedimiento para el análisis y visualización de los espacios vacíos dentro de la obturación endodónti-ca, utilizando la microtomografía de rayos x, y esta-blecer un protocolo para ser utilizado por cualquier investigador(AU)

Microtomography is a study that uses X-radiation to obtain high-resolution images of sizes of thousandths of millimeters. The 2D images are processed by different software to obtain volumes capable of being analyzed three-dimensionally. Microtomography is the study of choice when evaluating very small features with great precision. Endodontic filling seeks to achieve a seal that does not have voids within the filling obturation. This is important because the voids can allow, if they are in contact with the dentin wall, the entry of microorganisms into the root canal. The objective of this work was to describe the procedure for the analysis and visualization of voids within the endodontic filling using microtomography and to establish the protocol to be used by any researcher (AU)

Avances en endodoncia regenerativa: reporte de caso con uso de la membrana amniótica humana / Advances in regenerative endodontics: report of a case using a human amniotic membrane

Los procedimientos endodónticos regenerativos (REPs) representan una evolución significativa en el campo de la endodoncia, buscando no sólo tratar la infección o lesión presente en el diente, sino tam-bién promover la regeneración de los tejidos denta-rios afectados. El presente caso clínico muestra un incisivo lateral superior izquierdo con apexogénesis incompleta y diagnóstico de absceso alveolar crónico reagudizado en una paciente de 22 años, en el que se aplicó un procedimiento de endodoncia regenerativa (REPs). La estrategia terapéutica elegida se basó en los principios de ingeniería tisular, incorporando la novedosa aplicación de la membrana amniótica hu-mana liofilizada esterilizada como andamio bioactivo intraconducto. Las evaluaciones clínicas, radiográ-ficas y tomográficas a corto, mediano y largo plazo revelaron el éxito de la terapia. La resolución exitosa mostró en los controles a la pieza dentaria asintomá-tica, con una notable remisión de la patología apical, aumento de la longitud radicular y disminución del calibre apical. Se ha podido destacar la eficacia de los REPs, con una exitosa aplicabilidad de la membra-na amniótica como andamio innovador (AU)

Regenerative endodontic procedures (REPs) represent a significant evolution in the field of endodontics, aiming not only to address the infection or injury within the tooth, but also to promote the regeneration of the affected dental tissues. In this clinical case, an upper left lateral incisor with incomplete apexogenesis and diagnosis of acute exacerbation of a chronic periapical lesion in a 22-year-old patient is presented. A regenerative endodontic procedure (REPs) was applied. The chosen therapeutic strategy was based on tissue engineering principles, incorporating the innovative use of sterilized lyophilized human amniotic membrane as an intraconduct bioactive scaffold. Clinical, radiographic, and tomographic assessments at short, medium, and long-term follow-up revealed the success of the therapy. Successful resolution demonstrated an asymptomatic tooth in the follow-up, with a notable resolution of apical pathology, increased root length, and decreased apical caliber. The effectiveness of REPs has been highlighted, demonstrating the successful applicability of amniotic membrane as an innovative scaffold (AU)

Extrusão apical de irrigantes em dentes imaturos utilizando diferentes dispositivos de irrigação por pressão negativa / Apical extrusion of irrigants in immature teeth using different negative pressure irrigation devices

Objetivo: O objetivo deste estudo foi avaliar a extrusão apical de irrigantes em dentes imaturos simulados, comparando a irrigação convencional com outros dispositivos de irrigação por pressão negativa. Materiais e Métodos: 48 amostras de dentes imaturos simulados foram montadas em um modelo adaptado para conter o irrigante extravasado e distribuídas igualmente em 4 grupos (n=12) de acordo com o dispositivo de irrigação utilizado: Grupo Irrigação Convencional (IC), Grupo EndoVac (EV), Grupo Pulp Sucker (PS) e Grupo Ivac (IV). As amostras foram irrigadas com 15mL de solução irrigadora, sendo 10mL de NaOCl a 2,5% e 5mL de EDTA a 17% intercalados. As amostras foram pesadas em balança de precisão antes e depois dos procedimentos de irrigação, sendo a diferença entre os pesos final e inicial considerado o volume de irrigante extravasado. Os dados foram coletados e analisados estatisticamente pelos testes de Kruskal-wallis e exato de Fisher. Resultados: Os grupos que utilizaram pressão negativa promoveram significativamente menor volume de irrigante extravasado que o grupo IC (p<0,05), não havendo diferenças significativas quando comparados entre si (p>0,05). Houve diferenças significativas na associação entre os grupos e a extrusão de irrigante, sendo o grupo PS menos associado a extrusão de irrigante (p<0,005). Discussão: Estudos anteriores apontam os dispositivos de pressão negativa como opções seguras diante de extravasamento de irrigantes quando comparados à irrigação convencional. Conclusão: A irrigação convencional promoveu significativamente maior volume de extrusão de irrigante quando comparada aos dispositivos de irrigação por pressão negativa. O sistema PulpSucker mostrou extravasamento de irrigante em um número significativamente menor de amostras.

Aim: The aim of this study was to evaluate the apical extrusion of irrigants in simulated immature teeh, comparing convencional irrigation with other negative pressure irrigation devices. Materials and methods: 48 samples of simulated immature teeth were set up in an adapted model to contain the extravasated irrigant and evenly distributed into 4 groups (n=12) according to the device used: Convencional Irrigation Group (CI), EndoVac Group (EV), Pulp Sucker Group (PS) and Ivac Group (IV). The samples were irrigated with 15mL of irrigant solution, consisting of 10mL NaOCl 2,5% and 5mL EDTA 17%, in na alternating sequence. The samples' weights were measured using a precision scale before and after the irrigation procedures, with the difference between de final and initial weights considered the volume of extravasated irrigant. Data were collected and statistically analyzed by Kruskal-wallis and Fisher exact tests. Results: The groups that used negative pressure devices significantly promoted a lower volume of extruded irrigant than the CI group (p<0,05), with no significant differences between the negative pressure groups (p>0,05). There were signficant differences in the association between the groups and irrigant extrusion, with the PS group showing significantly less association with irrigant extrusion (p<0,005). Discussion: Previous studies have indicated that negative pressure devices are safe alternatives to convencional irrigation when considering irrigant extrusion. Conclusion: Conventional irrigation promoted a significantly greater volume of irrigant extrusion when compared to negative pressure irrigation devices. The PulpSucker system showed irrigant extravasation in significantly fewer samples.

Morphological assessment of the isthmus in mesial root canals of first mandibular molars / Avaliação morfológica do istmo nos canais radiculares mesiais dos primeiros molares inferiores

ABSTRACT Root canal morphology and its anatomical variations pose a great challenge to endodontists Aim The aim of this in silico study was to perform a qualitative and quantitative analysis of the threedimensional morphological characteristics of the isthmus in the mesial root canals of mandibular molars using microcomputed tomography (micro-CT) Material and Method Six hundred first mandibular molars were selected, including 317 with two mesial canals with isthmuses between the canals, and fully formed root. Isthmus morphology was determined in 3D longitudinal sections using Fan et al. (2010) classification. Root length, and the volume and area of apical and coronal level were measured. Additionally, the structural model index (SMI) of the canals were also assessed Results The prevalence of isthmuses in the mesial root canals was 32% type II, 29% type III, 22% type IV, and 17% type I. The root length was found to be 9.1±0.5 mm, the volume and area, of all root canal system, were 41.8±40.1 mm3 and 63.6±24.2 mm2 respectively. The isthmi volume and area alone were 11.06±9.03 mm3 and 30.02±11.02 mm2. The study confirmed that isthmuses are present in mesial canals of mandibular first molars, being more frequent in the apical third Conclusion The high prevalence of isthmuses with complex morphological features underscores the importance of using intracanal medications to disinfect areas unprepared by instruments.

RESUMO A morfologia do canal radicular e suas variações anatômicas representam um grande desafio para os endodontistas. O objetivo deste estudo ex vivo foi realizar uma análise qualitativa e quantitativa das características morfológicas tridimensionais do istmo nos canais mesiais de molares inferiores por meio de microtomografia computadorizada (micro-CT) Material e Método Foram selecionados 600 primeiros molares inferiores, incluindo 317 com dois canais mesiais com istmos e raiz totalmente formada. A morfologia do istmo foi determinada em cortes longitudinais 3D usando a classificação Fan et al. (2010). Foram mensurados o comprimento da raiz, o volume e a área apical e coronal e da cavidade pulpar. Adicionalmente, também foram avaliados o structure model index (SMI) dos canais Resultados A prevalência de istmos nos canais mesiais foi de 32% tipo II, 29% tipo III, 22% tipo IV e 17% tipo I. O comprimento da raiz foi de 9,1±0,5 mm, o volume e a área de todo o sistema de canais radiculares foram de 41.8±40.1 mm3 e 63.6±24.2 mm2, respectivamente. O volume e área do istmo isoladamente foram 11.06±9,03 mm3 e 30.02±11.02 mm2. O estudo confirmou que os istmos estão presentes em canais mesiais dos primeiros molares inferiores, sendo mais frequentes no terço apical Conclusão A alta prevalência de istmos com características morfológicas complexas ressalta a importância do uso de medicação intracanal para desinfecção de áreas não tocadas por instrumentos.

Unprepared areas and centralization of oval canals prepared with WaveOne Gold or XP-endo Shaper: microcomputed tomographic analyses / Areas não preparadas e centralização de canais ovais preparados com WaveOne Gold ou XP-endo Shaper: análises tomográficas microcomputadorizadas

ABSTRACT Current instrumentation systems cannot fully prepare oval root canal systems. This may cause accumulation of hard tissue debris and fail to eliminate bacteria from areas inaccessible to instrumentation, which could perpetuate periapical inflammation and jeopardize the success of endodontic treatment Aim To evaluate the performance of two endodontic systems in oval canals by investigating the changes in volume, unprepared areas, and centering ability of XP-endo Shaper (XPS) and WaveOne Gold (WOG) in oval canals using microcomputed tomography (micro-CT) Materials and Method Thirty mandibular canines were scanned before and after preparation with WOG (25/.07 and 35/.06) or XPS (30/.01) to evaluate the volume, surface area, and canal centralization at 4 mm and 10 mm from the apical foramen Results Volume and surface area increased significantly after preparation with both systems (p<0.05). However, no significant difference was observed in the unprepared areas, regarding either the entire canal (26.21% for WOG and 30.10% for XPS), or the apical segment (18.82% for WOG and 14.63% for XPS) (p >0.05) Conclusions Both systems maintained canal centralization, with no difference between them. XPS and WOG had similar shaping abilities in the mandibular canine, but left almost one third of the unprepared areas.

RESUMO Os sistemas de instrumentação atuais são incapazes de preparar completamente os sistemas de canais radiculares do canal oval, o que pode levar ao acúmulo de detritos de tecido duro e manter micro-organismos em áreas inacessíveis à instrumentação. Essas bactérias poderiam perpetuar a inflamação periapical e comprometer o sucesso do tratamento endodôntico Objetivo Para avaliar o comportamento de dois sistemas endodônticos em canais ovais, esse estudo investigou as alterações no volume, áreas não preparadas e capacidade de centralização do XP-endo Shaper (XPS) e do WaveOne Gold (WOG) em canais ovais usando microtomografia computadorizada (micro-CT) Material e métodos Trinta caninos inferiores foram escaneados antes e depois do preparo com WOG (25/.07 e 35/.06) ou XPS (30/.01) para avaliar o volume, a área de superfície e a centralização do canal a 4 mm e 10 mm do forame apical Resultados O volume e a área de superfície aumentaram significativamente após o preparo com ambos os sistemas (p<0,05). No entanto, não foram observadas diferenças significativas nas áreas não preparadas, não apenas em todo o canal (26,21% para WOG e 30,10% para XPS), mas também no segmento apical (18,82% para WOG e 14,63% para XPS) (p >0,05) Conclusão Ambos os sistemas mantiveram a centralização do canal, sem diferenças entre eles. O XPS e o WOG tiveram habilidades de modelagem semelhantes no canino mandibular, mas deixaram quase um terço das áreas do canal sem preparo.

Endodontic treatment as a Reduction in the Risk of infective Endocarditis in a Male Patient with Eisenmenger Syndrome

This case report aimed to describe the importance of endodontic treatment in reducing infectious foci in patients with Eisenmenger syndrome (ES) and describe the characteristics of ES, so that the endodontist can safely treat these patients. A 57-year-old male with ES sought dental care complaining of dental pain. Irreversible pulpitis was diagnosed in tooth 37 and pulp necrosis in teeth 36, 34 and 31. Tests of prothrombin time (PT), activated partial thromboblastin time (APTT) and international normalized ratio (INR) were prescribed to evaluate the profile of coagulation using Marevan and antibiotic prophylaxis with amoxicillin. The endodontic treatments were performed. At the end, the patient reported no pain or discomfort in the teeth and improved masticatory function. The removal of oral infectious foci in patients with ES is important to reduce the risk of IE, which could seriously compromise the health and overall prognosis of the patient.

Este reporte de caso tuvo como objetivo describir la importancia del tratamiento endodóntico en la reducción de focos infecciosos en pacientes con síndrome de Eisenmenger (SE) y describir las características del SE, para que el endodoncista pueda tratar con seguridad a estos pacientes. Un hombre de 57 años con ES buscó atención dental quejándose de dolor dental. Se diagnosticó pulpitis irreversible en el diente 37 y necrosis pulpar en los dientes 36, 34 y 31. Se solicitaron pruebas de tiempo de protrombina (PT), tiempo de tromboblastina parcial activada (TTPA) y índice internacional normalizado (INR) para evaluar el perfil de coagulación utilizando Marevan y profilaxis antibiótica con amoxicilina. Se realizaron los tratamientos de endodoncia. Al final, el paciente no refirió dolor ni molestias en los dientes y mejoró la función masticatoria. La eliminación de focos infecciosos orales en pacientes con ES es importante para reducir el riesgo de EI, que podría comprometer gravemente la salud y el pronóstico general del paciente.

Tratamento de perfuração iatrogênica de furca com técnica de inserção modificada do mta: relato de caso / Iatrogenic furca perforation treatment with modified mta insertion technique: case report

As perfurações endodônticas podem ocorrer patologicamente por lesão cariosa profunda, bem como durante o acesso ou na instrumentação dos canais radiculares, que em sua grande maioria estão relacionadas com a negligência ou desconhecimento das variações anatômicas internas do dente. O presente trabalho descreve um caso clínico de perfuração de furca, onde o tratamento inicial foi baseado na descontaminação e selamento da comunicação com uma técnica de inserção modificada do MTA. Após a anestesia, foi realizado o isolamento absoluto e remoção de tecido infectado presente na câmara pulpar. Feita a limpeza da perfuração utilizando soro fisiológico e modelagem do canal com o instrumento reciprocante, a obturação foi concebida com cone de guta percha e cimento biocerâmico. Em seguida, o MTA foi manipulado, de acordo com recomendações do fabricante usando água destilada na proporção 1:1 e inserido na canaleta de uma régua endodôntica com a espátula de inserção nº1. O material foi removido da canaleta e inserido na perfuração, finalizando o vedamento da mesma. Portanto, concluiu-se que o selamento da perfuração apresentou um resultado satisfatório, tanto clínico como radiográfico, destacado pela proservação de 5 meses, evidenciando discreta formação de trabeculado ósseo na região de furca(AU)

Endodontic perforations can occur pathologically due to a deep carious lesion, as well as during access or instrumentation of root canals, which are mostly related to negligence or ignorance of the internal anatomical variations of the tooth. The present work describes a clinical case of furcation perforation, where the initial treatment was based on decontamination and sealing of the communication with a modified MTA insertion technique. After anesthesia, absolute isolation and removal of infected tissue present in the pulp chamber was performed. After cleaning the perforation using saline solution and modeling the canal with the reciprocating instrument, the filling was designed with a gutta-percha cone and bioceramic cement. Then, the MTA was manipulated, according to the manufacturer's recommendations, using distilled water in a 1:1 ratio and inserted into the groove of an endodontic ruler with the #1 insertion spatula. The material was removed from the channel and inserted into the perforation, finishing its sealing. Therefore, it was concluded that the sealing of the perforation presented a satisfactory result, both clinical and radiographic, highlighted by the 5-month followup, evidencing a slight formation of bone trabeculate in the furcation region(AU)

Prevalencia de cristales de colesterol en granulomas perirradiculares de origen endodóntico / Prevalence of cholesterol crystals in periradicular granulomas of endodontic origin

Objetivos: Identificar y determinar la prevalencia de cristales de colesterol (CRCo) en granulomas perirradiculares de origen endodóntico y el tipo de reacción que provocan en los tejidos circundantes. Material y métodos: Se estudiaron con microscopía óptica 75 preparados histológicos de archivo pertenecientes a lesiones perirradiculares humanas correspondientes a piezas dentarias que habían recibido un tratamiento endodóntico pre- vio y que, según los informes que acompañaban las muestras, habían sido obtenidas mediante una apicectomía. Del total, 68 muestras fueron diagnosticadas como granulomas, mientras que los 7 restantes se diagnosticaron como quistes inflamato- rios y fueron descartadas. Resultados: 39 granulomas pertenecían a pacientes de sexo femenino con presencia de CRCo en el 58,97% de los ca- sos. Los 29 granulomas restantes pertenecían al sexo mascu- lino y presentaron CRCo en un 41,37%. La mayor proporción de CRCo fue hallada en granulomas pertenecientes a pacien- tes mayores de 62 años. Los CRCo se observaron rodeados de macrófagos y células gigantes multinucleadas, provocando una reacción a cuerpo extraño. También se observaron células espumosas en áreas circundantes. Conclusiones: La presencia de CRCo en granulomas perirradiculares de origen endodóntico provoca una reacción a cuerpo extraño que puede interferir con el proceso de re- paración posendodóntico especialmente en pacientes de edad avanzada (AU)

Aim: Identify and determine the prevalence of cholester- ol crystals (CRCo) in periradicular granulomas of endodontic origin and the type of reaction they produce in the surround- ing tissues. Material and methods: 75 archival histological preparations were studied with optical microscopy. They be- longed to human periradicular lesions corresponding to teeth that had received a previous endodontic treatment and that, according to the reports accompanying the samples, had been obtained by an apicoectomy. Of the total, 68 samples were diagnosed as granulomas, while the remaining 7 were diag- nosed as inflammatory cysts and were discarded. Results: 39 granulomas corresponded to female patients in which the presence of CRCo was observed in 58.97% of the cases. The remaining 29 granulomas were from male patients and showed CRCo in 41.37% of the cases. The highest pro- portion of CRCo was found in patients over 62 years of age. The CRCo were surrounded by macrophages and multinucle- ated giant cells causing a foreign body reaction. Foam cells were also observed in the surrounding areas. Conclusions: The presence of CRCo in periradicular granulomas of endodontic origin could be a factor interfering with periapical healing after conventional endodontic thera- py, especially in elderly patients (AU)

Physico-Chemical comparison of four commercially available mineral trioxide aggregates / Comparación fisicoquímica de cuatro mineral trióxido agregados disponibles comercialmente

Abstract To compare the physicochemical composition of 4 MTAs commercially available in Latin America. ProRoot MTA (Dentsply, USA), MTA Angelus (Angelus, Brazil), MTA Flow (Ultradent, USA), and MTA Viarden (Viarden, Mexico) were physically and chemically compared. Scanning electron microscopy (SEM) images were obtained from the MTA powder and the prepared presentations. Energy Dispersive X-Ray Spectroscopy (EDS) analyses were performed by triplicate, to calculate the mass proportion of calcium (Ca), silicon (Si), the Ca/Si proportion among the 4 brands. Thermogravimetric analyses (TGA) were conducted (50ºC-1000ºC), and mass loss and inflection points were calculated for each material. Statistical differences for Ca and Si content were determined by ANOVA (p<0.05). SEM images showed evident differences in the appearance of both the powder and the prepared MTAs among brands. Angelus MTA showed cubic prisms not observed in the other 3 brands. ProRoot MTA and MTA Flow showed similar homogeneous structures. MTA Viarden was the less homogeneous, with random structures (>15um). When comparing the mass proportions of Ca and Si between the 4 powder samples, MTA Viarden showed a significantly lower proportions of both elements when compared with the other brands (p<0.005). TGA análisis showed a similar behavior for ProRoot MTA, MTA Angelus and MTA Flow, with less than 2% mass loss when the 1000C temperature was reached. MTA Viarden showed a mass loss of 9,94% before the 700C, indicating the presence of different content sensible to temperature degradation. The analyzed MTAs demonstrated to vary significantly in their chemical composition and physical characteristics. Clinicians must be aware of the differences between different brands of a same material, and future research should focus on the clinical implications of these differences.

Resumen Comparar la composición fisicoquímica de 4 MTA disponibles comercialmente en América Latina. Se compararon física y químicamente ProRoot MTA (Dentsply, EE. UU.), MTA Angelus (Angelus, Brasil), MTA Flow (Ultradent, EE. UU.) y MTA Viarden (Viarden, México). Se obtuvieron imágenes de microscopía electrónica de barrido (SEM) del polvo de MTA y de las presentaciones preparadas. Los análisis de espectroscopía de dispersión de energía de rayos X (EDS) se realizaron por triplicado para calcular la proporción de masa de calcio (Ca), silicio (Si), la proporción Ca/Si entre las 4 marcas. Se realizaron análisis termogravimétricos (TGA) (50ºC-1000ºC), y se calcularon las pérdidas de masa y los puntos de inflexión para cada material. Las diferencias estadísticas para el contenido de Ca y Si se determinaron mediante ANOVA (p<0,05). Los análisis SEM mostraron diferencias evidentes en la apariencia tanto del polvo como las preparaciones de los MTA, entre las diferentes marcas. MTA Angelus mostró prismas cúbicos no observados en las otras 3 marcas. ProRoot MTA y MTA Flow mostraron estructuras homogéneas similares. MTA Viarden fue el menos homogéneo, con estructuras aleatorias (>15um). Al comparar las proporciones de masa de Ca y Si entre las 4 muestras de polvo, MTA Viarden mostró proporciones significativamente más bajas de ambos elementos en comparación con las otras marcas (p<0,005). El análisis TGA mostró un comportamiento similar para ProRoot MTA, MTA Angelus y MTA Flow, con menos del 2 % de pérdida de masa al alcanzar los 1000 °C de temperatura. El MTA Viarden mostró una pérdida de masa de 9,94% antes de los 700 °C, indicando la presencia de diferentes contenidos sensibles a la degradación por temperatura. Los MTA analizados demostraron diferencias significativas en su composición química y características físicas. Los clínicos deben ser conscientes de las diferencias entre las diferentes marcas de un mismo material, y futuras investigaciones deben enfocarse en las implicaciones clínicas de estas diferencias.

Continuous Wave of Condensation Improves the Filling of Curved Canals: a Micro-CT Study / La condensación de onda contínua mejora el selle de canales curvos: un estudio de micro-CT

Abstract The aim of this study was to compare the filling capacity in curved root canal using a new continuous wave of condensation technique (Termo Pack II, Easy Dental Equipments, Brazil) or lateral compaction. The percentage of voids in the filling of mesial root canals of mandibular molars was assessed by micro-computed tomography (micro-CT). Mesial root canals (n=24) of mandibular molars with a degree of curvature between 20° and 40° were prepared using rotary system (ProDesign Logic, Easy, Brazil) up to #35, .05 taper. The root canals were filled by using the continuous wave of condensation system or lateral compaction and AH Plus sealer (n=12). Scanning at 9 µm was performed after preparation and after filling by using micro-CT SkyScan 1176. The volumetric percentage of filling material and voids (total length and in each root canal third) were calculated. Data were analyzed using ANOVA/ Tukey and Student's t tests (α=0.05). Before the filling techniques, the root canals volume after preparation was similar (p>0.05). The root canals filled by the continuous wave of condensation technique presented the lowest percentage of voids, and the greatest percentage of filling material in total length and thirds (cervical, middle and apical) (p<0.05). Both techniques were not able of completely filling the root canals. The continuous wave of condensation technique Termo Pack II promoted better root canal filling in curved root canals, when compared with lateral compaction.

Resumen El objetivo de este estudio fue comparar la capacidad de obturación en conductos radiculares curvos utilizando una nueva técnica de condensación de onda continua (Termo Pack II, Easy Dental Equipments, Brasil) vs compactación lateral. El porcentaje de brechas en la obturación de los conductos radiculares mesiales de los molares mandibulares se evaluó mediante microtomografía computarizada (micro-CT). Se prepararon conductos radiculares mesiales (n=24) de molares mandibulares con un grado de curvatura entre 20° y 40° utilizando un sistema rotatorio (ProDesign Logic, Easy, Brasil) al #35, conicidad 0,05. Los conductos radiculares se obturaron utilizando un sistema de condensación de onda contínua o compactación lateral y cemento AH Plus (n=12). Se realizó un escaneo de 9 µm después de la preparación y después de la obturación usando el micro-CT SkyScan 1176. Se calculó el porcentaje volumétrico de material de obturación y vacíos (longitud total y en cada tercio del conducto radicular). Los datos se analizaron utilizando las pruebas ANOVA/Tukey y t de Student (α=0,05). Antes de las técnicas de obturación, el volumen de los conductos radiculares después de la preparación fue similar (p>0,05). Los conductos radiculares obturados con la técnica de condensación por onda contínua presentaron el menor porcentaje de vacíos y el mayor porcentaje de material de obturación en longitud total y en tercios (cervical, medio y apical) (p<0,05). Ambas técnicas no fueron capaces de llenar completamente los conductos radiculares. La técnica de condensación de onda contínua Termo Pack II promovió un mejor relleno del conducto radicular en conductos radiculares curvos en comparación con la compactación lateral.

Acidente de hipoclorito de sódio durante retratamento endodôntico / Sodium hypochlorite accident during endodontic retreatment / Accidente con hipoclorito de sodio durante retratamiento

O retratamento endodôntico é uma intervenção executada em um dente que já apresenta um tratamento realizado anteriormente que foi mal sucedido clínica e/ou radiograficamente. O objetivo deste trabalho foi o de relatar um caso de retratamento endodôntico na clínica de Atenção Básica III da Faculdade de Odontologia de Pernambuco devido ao desconforto estético do incisivo lateral superior que estava fraturado e necessitando de prótese fixa. Após anamnese, exames extra e intra-oral e exames radiográficos, constatou-se o canal do dente 12 havia sido tratado endodonticamente há aproximadamente quatro anos. A remoção da gutta percha contaminada foi realizada com as limas rotatórias EasyLogic RT® 25mm sequência 30.10 torque 4N e 900 RPM, 25.08 torque 4Ne 900 RPM. Após remoção da guta-percha, realizou-se o protocolo de irrigação com solução de hipoclorito de sódio a 2,5% (Biodinâmic). A odontometria foi realizada com localizador apical e confirmada por radiografia periapical e o repreparo do canal radicular confeccionado com a Lima EasyLogic 2® de número 35.06 e posterior irrigação com a solução de Labarraque. Nesse momento, o paciente relatou dor e após aspiração com sugador endodôntico, notou-se sangramento abundante, correspondendo ao extravasamento do hipoclorito de sódio (Enfizema por hipoclorito de sódio. O paciente foi medicado com Amoxacilina 875mg de 12 em 12 horas durante sete dias, Predisin 20mg ­ Corticóide - um comprimido pela manhã por 4 dias e Nimesulida 100mg de 12 em 12 horas durante 5 dias. Após 24 horas o paciente não relatou dor nem edema. Na segunda sessão, 10 dias após o acidente, a obturação foi realizada com cone único de guta-percha 35.06 HBassi (Easy, associado ao cimento Bio C Sealer Fillapex (Angelus®). Concluiu-se que a conduta terapêutica imediata instituída para este caso, foi efetiva para o controle da dor e prevenção de complicações adicionais após injeção acidental de hipoclorito de sódio.

Endodontic retreatment is an intervention performed on a tooth that already has a previously performed treatment that was clinically and/ or radiographically unsuccessful. The objective of this study was to report a case of endodontic retreatment at the Primary Care Clinic III of the Faculty of Dentistry of Pernambuco due to the aesthetic discomfort of the maxillary lateral incisor that was fractured and required a fixed prosthesis. After anamnesis, extra and intraoral exams and radiographic exams, it was found that the root canal of tooth 12 had been endodontically treated for approximately four years. Removal of contaminated gutta percha with those performed with EasyLogic RT® 25mm rotary files sequence 30.10 torque 4N and 900 RPM, 25.08 torque 4N and 900 RPM. After removing the gutta-percha, the irrigation protocol was performed with a 2.5% sodium hypochlorite solution (Biodynamic). Odontometry was performed with an apex locator and confirmed by periapical radiography and root canal re-preparation made with EasyLogic 2® File number 35.06 and subsequent irrigation with Labarraque's solution. At that moment, the patient reported pain and after aspiration with an endodontic sucker, there was profuse bleeding, corresponding to sodium hypochlorite extravasation (Sodium hypochlorite emphysema. The patient was medicated with Amoxicillin 875mg every 12 hours for seven days, Predisin 20mg - Corticosteroid - one tablet in the morning for 4 days and Nimesulide 100mg every 12 hours for 5 days. After 24 hours the patient did not report pain or swelling. In the second session, 10 days after the accident, the filling was performed with a single cone of gutta-percha 35.06 HBassi (Easy, associated with Bio C Sealer Fillapex cement (Angelus®). It was concluded that the immediate therapeutic approach instituted for this case was effective for pain control and prevention of complications. additional doses after accidental injection of sodium hypochlorite.

El retratamiento endodóntico es una intervención que se realiza sobre un diente que ya tiene un tratamiento realizado previamente que resultó clínica y/o radiográficamente fallido. El objetivo de este estudio fue relatar un caso de retratamiento endodóntico en la Clínica de Atención Básica III de la Facultad de Odontología de Pernambuco debido a la incomodidad estética del incisivo lateral maxilar que estaba fracturado y requirió prótesis fija. Después de anamnesis, exámenes extraorales, intraorales y exámenes radiográficos, se encontró que el conducto radicular del diente 12 había sido tratado endodónticamente durante aproximadamente cuatro años. Eliminación de gutapercha contaminada con las realizadas con limas rotatorias EasyLogic RT® 25mm secuencia 30.10 torque 4N y 900 RPM, 25.08 torque 4N y 900 RPM. Tras retirar la gutapercha, se realizó el protocolo de irrigación con una solución de hipoclorito de sodio al 2,5% (Biodynamic). Se realizó odontometría con localizador de ápices y se confirmó mediante radiografía periapical y repreparación del conducto radicular realizada con EasyLogic 2® File número 35.06 y posterior irrigación con solución de Labarraque. En ese momento el paciente refirió dolor y luego de aspiración con ventosa endodóntica presentó sangrado profuso, correspondiente a extravasación de hipoclorito de sodio (Enfisema por hipoclorito de sodio. El paciente fue medicado con Amoxicilina 875mg cada 12 horas por siete días. Predisin 20mg - Corticosteroide - una tableta por la mañana por 4 días y Nimesulida 100mg cada 12 horas por 5 días, luego de 24 horas el paciente no refirió dolor ni hinchazón, en la segunda sesión, 10 días después del accidente, se realizó el relleno con un solo cono de gutapercha 35.06 HBassi (Easy, asociado al cemento Bio C Sealer Fillapex (Angelus®). Se concluyó que el abordaje terapéutico inmediato instituido para este caso fue eficaz para el control del dolor y la prevención de complicaciones. dosis adicionales después de accidente inyección de hipoclorito de sodio.

Effect of Endo-Z bur or Bladesonic ultrasonic tip on the adaptation of filling material. A micro-CT study

Abstract This study aimed to evaluate the effect of apicoectomy performed with a bur or an ultrasonic tip on the adaptation of the filling material to root canal dentin. Twenty human mandibular incisors were selected and prepared with a ProDesign Logic system up to diameter 40/.05. The root canals were filled with Bio-C Sealer (Angelus, PR, Brazil) using the single cone technique and were stored at 37ºC and 95% relative humidity for 7 days. After this period, the apicoectomy of the 3 millimeters of the root apex was performed using Endo-Z bur (Dentsply Sirona) or Bladesonic ultrasonic tip (Helse Ultrasonic, Santa Rosa de Viterbo, Brazil) (n=10). The specimens were scanned by micro-computed tomography (micro-CT; SkyScan 1176) with a voxel size of 8.74 µm after obturation and after apicoectomy. The percentage of voids at the interface between the filling material and the root canal wall was evaluated in the apical 4 mm of the root after apicoectomy, besides the time cutting to both devices. The data obtained were submitted to paired and unpaired t-tests (α = 0.05). Endo-Z and Bladesonic increased the percentage of voids between the filling material and the dentin after apicectomy (p<0.05), and they were similar (p>0.05). Endo-Z has a shorter time to perform apicoectomy compared to Bladesonic (p<0.05). Apicectomies with Endo-Z or Bladesonic could harm the material/dentin interface, while the Endo-Z bur was faster than the Bladesonic ultrasonic tip.

Resumo O objetivo deste estudo foi avaliar o efeito da apicectomia realizada com broca ou inserto ultrassônico na adaptação do material obturador á dentina do canal radicular. Vinte incisivos inferiores humanos extraídos foram selecionados e preparados com o sistema ProDesign Logic até o diâmetro 40/.05. Os canais radiculares foram obturados com Bio-C Sealer (Angelus, PR, Brasil) por meio da técnica de cone único e foram armazenados em estufa a 37ºC e umidade relativa de 95% por 7 dias. Após esse período, foi realizada apicectomia dos 3 milímetros apicais utilizando broca Endo-Z (Maillefer - Dentsply) ou inserto ultrassônico BladeSonic (Helse Ultrasonic, Santa Rosa de Viterbo, Brasil) (n=10). Os espécimes foram escaneados por meio de microtomografia computadorizada (micro-CT; SkyScan 1176) com tamanho de voxel de 8,74 µm após obturação e após apicectomia. Please, correct this sentece to O percentual de falhas na interface entre o material obturador e a parede dentinaria foi avaliado nos 4 mm apicais da raiz apos apicectomia, alem do tempo de corte para ambos dispositivos. Os dados obtidos foram submetidos aos testes t pareado e não pareado (α = 0,05). Endo-Z e Bladesonic aumentaram o percentual de vazios entre o material obturador e a parede da dentina após apicectomia (p<0.05), sendo semelhantes entre si (p>0.05). Endo-Z demonstrou menor tempo para realizar apicectomia em comparação com Bladesonic (p<0.05). Apicectomias com Endo-Z ou Bladesonic podem prejudicar a interface material obturador/dentina, sendo a broca Endo-Z mais rápida que a ponta ultrassônica Bladesonic.