Modulating the production of xylanase by Bacillus pumilus BS131 through optimization using waste fiber sludge / Modulando a produção de xilanase por Bacillus pumilus BS131 por meio da otimização usando lodo de fibra residual

In recent days, cheapest alternative carbon source for fermentation purpose is desirable to minimize production cost. Xylanases have become attractive enzymes as their potential in bio-bleaching of pulp and paper industry. The objective of the present study was to identify the potential ability on the xylanase production by locally isolated Bacillus pumilus BS131 by using waste fiber sludge and wheat bran media under submerged fermentation. Culture growth conditions were optimized to obtain significant amount of xylanase. Maximum xylanase production was recorded after 72 hours of incubation at 30 °C and 7 pH with 4.0% substrate concentration. In the nutshell, the production of xylanase using inexpensive waste fiber sludge and wheat-bran as an alternative in place of expensive xylan substrate was more cost effective and environment friendly.

Nos últimos dias, a fonte alternativa de carbono mais barata para fins de fermentação é desejável para minimizar o custo de produção. As xilanases têm se tornado enzimas atraentes como seu potencial no biobranqueamento da indústria de papel e celulose. O objetivo do presente estudo foi identificar a capacidade potencial na produção de xilanase por Bacillus pumilus BS131 isolado localmente usando lodo de fibra residual e farelo de trigo em meio de fermentação submersa. As condições de crescimento da cultura foram otimizadas para obter uma quantidade significativa de xilanase. A produção máxima de xilanase foi registrada após 72 horas de incubação a 30 °C e pH 7 com concentração de substrato de 4,0%. Resumindo, a produção de xilanase usando lodo de fibra residual de baixo custo e farelo de trigo como uma alternativa no lugar do substrato de xilano caro foi mais econômica e ecológica.

Modulating the production of xylanase by Bacillus pumilus BS131 through optimization using waste fiber sludge

Abstract In recent days, cheapest alternative carbon source for fermentation purpose is desirable to minimize production cost. Xylanases have become attractive enzymes as their potential in bio-bleaching of pulp and paper industry. The objective of the present study was to identify the potential ability on the xylanase production by locally isolated Bacillus pumilus BS131 by using waste fiber sludge and wheat bran media under submerged fermentation. Culture growth conditions were optimized to obtain significant amount of xylanase. Maximum xylanase production was recorded after 72 hours of incubation at 30 °C and 7 pH with 4.0% substrate concentration. In the nutshell, the production of xylanase using inexpensive waste fiber sludge and wheat-bran as an alternative in place of expensive xylan substrate was more cost effective and environment friendly.

Resumo Nos últimos dias, a fonte alternativa de carbono mais barata para fins de fermentação é desejável para minimizar o custo de produção. As xilanases têm se tornado enzimas atraentes como seu potencial no biobranqueamento da indústria de papel e celulose. O objetivo do presente estudo foi identificar a capacidade potencial na produção de xilanase por Bacillus pumilus BS131 isolado localmente usando lodo de fibra residual e farelo de trigo em meio de fermentação submersa. As condições de crescimento da cultura foram otimizadas para obter uma quantidade significativa de xilanase. A produção máxima de xilanase foi registrada após 72 horas de incubação a 30 °C e pH 7 com concentração de substrato de 4,0%. Resumindo, a produção de xilanase usando lodo de fibra residual de baixo custo e farelo de trigo como uma alternativa no lugar do substrato de xilano caro foi mais econômica e ecológica.

Modulating the production of xylanase by Bacillus pumilus BS131 through optimization using waste fiber sludge / Modulando a produção de xilanase por Bacillus pumilus BS131 por meio da otimização usando lodo de fibra residual

Abstract In recent days, cheapest alternative carbon source for fermentation purpose is desirable to minimize production cost. Xylanases have become attractive enzymes as their potential in bio-bleaching of pulp and paper industry. The objective of the present study was to identify the potential ability on the xylanase production by locally isolated Bacillus pumilus BS131 by using waste fiber sludge and wheat bran media under submerged fermentation. Culture growth conditions were optimized to obtain significant amount of xylanase. Maximum xylanase production was recorded after 72 hours of incubation at 30 °C and 7 pH with 4.0% substrate concentration. In the nutshell, the production of xylanase using inexpensive waste fiber sludge and wheat-bran as an alternative in place of expensive xylan substrate was more cost effective and environment friendly.

Resumo Nos últimos dias, a fonte alternativa de carbono mais barata para fins de fermentação é desejável para minimizar o custo de produção. As xilanases têm se tornado enzimas atraentes como seu potencial no biobranqueamento da indústria de papel e celulose. O objetivo do presente estudo foi identificar a capacidade potencial na produção de xilanase por Bacillus pumilus BS131 isolado localmente usando lodo de fibra residual e farelo de trigo em meio de fermentação submersa. As condições de crescimento da cultura foram otimizadas para obter uma quantidade significativa de xilanase. A produção máxima de xilanase foi registrada após 72 horas de incubação a 30 °C e pH 7 com concentração de substrato de 4,0%. Resumindo, a produção de xilanase usando lodo de fibra residual de baixo custo e farelo de trigo como uma alternativa no lugar do substrato de xilano caro foi mais econômica e ecológica.

Produção e purificação integrada de protease fibrinolítica de Mucor subtilissimus UCP 1262 / Integrated production and purification of fibrinolytic protease from Mucor subtilissimus UCP 1262

As enzimas fibrinolíticas podem ser obtidas de micro-organismos por meio de processos fermentativos. O presente trabalho teve como objetivo avaliar a produção e extração integrada da protease fibrinolítica de Mucor subtilissimus UCP 1262 usando sistema de duas fases aquosas (SDFA). O processo integrado foi realizado para avaliar a produção, partição e recuperação da protease fibrinolítica, segundo planejamento experimental 23, utilizando como variáveis independentes a massa molar do polietileno glicol (PEG), a concentração do PEG e a concentração do sulfato de sódio. A maior atividade fibrinolítica (15,40U/mL) foi obtida na fase rica em sulfato de sódio no ensaio composto por 10% de sal e 18% de PEG 8000 (g/mol). Recuperações superiores a 80% foram obtidas. A protease fibrinolítica apresentou pH ótimo 7,0, estabilidade entre os pH 6,0 e 8,5, temperatura ótima 50°C, sendo estável de 10°C a 50°C. A enzima foi classificada como uma serino protease, com massa molecular de 52kDa. Como resultado, o processo é notavelmente eficaz para pré-purificar a protease fibrinolítica com baixo custo e rapidez significativa. Quando comparada a outras técnicas de produção e purificação isoladas, a fermentação extrativa é um processo digno a ser substituto das etapas iniciais de separação convencionais.(AU)

Fibrinolytic enzymes can be obtained from microorganisms through fermentative processes. The study aimed to evaluate the fibrinolytic protease production and integrated extraction from Mucor subtilissimus UCP 1262 by extractive fermentation using Aqueous Two-Phase Systems (ATPS). The integrated process was carried out to assess the production, partition and fibrinolytic enzyme recovery, according to a 2 3 -experimental design, using as independent variables Polyethylene glycol (PEG) molar mass, PEG and sodium sulphate concentration, concentration. The highest fibrinolytic activity (15.40U/mL) was obtained in sodium sulfate rich phase in the assay comprising of 10% of salt and 18% of PEG 8000 (g/mol). Yield greater than 80% was obtained. The fibrinolytic protease presented optimum pH 7.0 and stability between pH 6.0 and 8.5, and optimum temperature 50°C, stable between 10°C to 50°C. The enzyme was classified as a serine-protease with 52kDa of molecular weight. As a result, the process is remarkably effective to pre-purify the fibrinolytic protease with a low cost and significantly faster processing time. When compared to other isolated production and purification techniques the extractive fermentation is worthy of being a candidate to replace the initial stages of conventional separation processes.(AU)

Assessment of pectinase-producing fungi isolated from soil and the use of orange waste as a substrate for pectinase production

Pectinases are important enzymes not only for their potential applications in different industries such animal feed, agricultural, textile, beverage, food processing, oil extraction, etc. Ten fungal species were isolated from the soil and screened for production of pectinase enzyme by using the pectin agar medium. Pectinolytic enzymes synthesis were attained at a temperature of 30 °C and activities were determined after a seven-days culture of Aspergillus sp. 391 and Aspergillus sp. 031, in a basic medium containing 2% citrus pectin and as the sole carbon source. The extract enzymatic showed an optimum activity for exo-polygalacturonase (PG) and pectin lyase (PNL) against galacturonic acid and pectin at pH 4.5 and 5.5, respectively. There were variations in PG and PNL enzymes levels produced in culture filtrates obtained of Aspergillus sp. 391 with addition of citrus waste (2.0 and 4.0 % w/v) to the medium. Maximum activity for PNL activity was observed in the medium containing 5% pectin or 4% citrus waste, as sole carbon source, after 7 days of growth. The results showed that the isolate Aspergillus sp. 391 is a promising for pectinolytic enzymes production at the industrial level.(AU)

Agroindustrial biomass for xylanase production by Penicillium chrysogenum: purification, biochemical properties and hydrolysis of hemicelluloses

Background: In this work, the xylanase production by Penicillium chrysogenum F-15 strain was investigated using agroindustrial biomass as substrate. The xylanase was purified, characterized and applied in hemicellulose hydrolysis. Results: The highest xylanase production was obtained when cultivation was carried out with sugar cane bagasse as carbon source, at pH 6.0 and 20°C, under static condition for 8 d. The enzyme was purified by a sequence of ion exchange and size exclusion chromatography, presenting final specific activity of 834.2 U·mg·prot-1. T he molecular mass of the purified enzyme estimated by SDS-PAGE was 22.1 kDa. The optimum activity was at pH 6.5 and 45°C. The enzyme was stable at 40°C with half-life of 35 min, and in the pH range from 4.5 to 10.0. The activity was increased in the presence of Mg+2 and Mn+2 and reducing agents such as DTT and ßmercaptoethanol, but it was reduced by Cu+2 and Pb+2 . The xylanase presented Km of 2.3 mM and Vmax of 731.8 U·mg·prot-1 with birchwood xylan as substrate. This xylanase presented differences in its properties when it was compared to the xylanases from other P. chrysogenum strains. Conclusion: The xylanase from P. chrysogenum F-15 showed lower enzymatic activity on commercial xylan than on hemicellulose from agroindustry biomass and its biochemistry characteristics, such as stability at 40°C and pH from 4.0 to 10.0, shows the potential of this enzyme for application in food, feed, pulp and paper industries and for bioethanol production.

Combined strategies for improving production of a thermo-alkali stable laccase in Pichia pastoris

Background: Laccases are copper-containing enzymes which have been used as green biocatalysts for many industrial processes. Although bacterial laccases have high stabilities which facilitate their application under harsh conditions, their activities and production yields are usually very low. In this work, we attempt to use a combinatorial strategy, including site-directed mutagenesis, codon and cultivation optimization, for improving the productivity of a thermo-alkali stable bacterial laccase in Pichia pastoris. Results: A D500G mutant of Bacillus licheniformis LS04 laccase, which was constructed by site-directed mutagenesis, demonstrated 2.1-fold higher activity when expressed in P. pastoris. The D500G variant retained similar catalytic characteristics to the wild-type laccase, and could efficiently decolorize synthetic dyes at alkaline conditions. Various cultivation factors such as medium components, pH and temperature were investigated for their effects on laccase expression. After cultivation optimization, a laccase activity of 347 ± 7 U/L was finally achieved for D500G after 3 d of induction, which was about 9.3 times higher than that of wild-type enzyme. The protein yield under the optimized conditions was about 59 mg/L for D500G. Conclusions: The productivity of the thermo-alkali stable laccase from B. licheniformis expressed in P. pastoris was significantly improved through the combination of site-directed mutagenesis and optimization of the cultivation process. The mutant enzyme retains good stability under high temperature and alkaline conditions, and is a good candidate for industrial application in dye decolorization.

Escherichia coli expressing endoglucanase gene from Thai higher termite bacteria for enzymatic and microbial hydrolysis of cellulosic materials

Background: Endoglucanase plays a major role in initiating cellulose hydrolysis. Various wild-type strains were searched to produce this enzyme, but mostly low extracellular enzyme activities were obtained. To improve extracellular enzyme production for potential industrial applications, the endoglucanase gene of Bacillus subtilis M015, isolated from Thai higher termite, was expressed in a periplasmic-leaky Escherichia coli. Then, the crude recombinant endoglucanase (EglS) along with a commercial cellulase (Cel) was used for hydrolyzing celluloses and microbial hydrolysis using whole bacterial cells. Results: E. coli Glu5 expressing endoglucanase at high levels was successfully constructed. It produced EglS (55 kDa) with extracellular activity of 18.56 U/mg total protein at optimal hydrolytic conditions (pH 4.8 and 50°C). EglS was highly stable (over 80% activity retained) at 40­50°C after 100 h. The addition of EglS significantly improved the initial sugar production rates of Cel on the hydrolysis of carboxymethyl cellulose (CMC), microcrystalline cellulose, and corncob about 5.2-, 1.7-, and 4.0-folds, respectively, compared to those with Cel alone. E. coli Glu5 could secrete EglS with high activity in the presence of glucose (1% w/v) and Tween 80 (5% w/v) with low glucose consumption. Microbial hydrolysis of CMC using E. coli Glu5 yielded 26 mg reducing sugar/g CMC at pH 7.0 and 37°C after 48 h. Conclusions: The recombinant endoglucanase activity improved by 17 times compared with that of the native strain and could greatly enhance the enzymatic hydrolysis of all studied celluloses when combined with a commercial cellulase.

Alkaline protease from a new halotolerant alkaliphilic Bacillus agaradhaerens strain ak-r isolated from egyptian soda lakes / Protease alcalina de uma nova estirpe ak-r halotolerante e alcalófila de Bacillus agaradhaerens isolada a partir dos lagos alcalinos egípcios

Alkaline proteases are hydrolytic enzymes that cleave peptide bonds in proteins and peptides in alkaline conditions, which occupy a pivotal importance with respect to their industrial applications. This study aimed to isolate new alkaline protease producing alkaliphilic bacteria from Egyptian soda lakes and optimize the fermentation process to enhance the enzyme production. The extensive screening process of the samples collected from Egyptian soda lakes resulted in isolation of a potent alkaline protease producing alkaliphilic strain AK-R. The isolate was identified as Bacillus agaradhaerens strain AK-R based on 16S rRNA gene analysis (99%). Wheat bran and gelatin supported maximum alkaline protease production as carbon and nitrogen sources, respectively. Strain AK-R is halo-tolerant thermotolerant alkaliphilic bacterium in nature, as it can grow over a wide range of NaCl concentrations (up to 25%) and up to 55 °C, with maximal growth and enzyme production at 2.5-5%, and pH 11 at 35 °C. Among the tested cations, only Mg2+ and Ca2+ ions significantly enhanced the enzyme production by about 1.2, and 1.3 fold compared to control, respectively. Alkaline protease secretion was coherent with the growth pattern, reaching maximal yield after about 32 h (mid stationary phase). In conclusion a new halo-tolerant thermo-tolerant alkaliphilic alkaline protease producing Bacillus agaradhaerens strain AK-R was isolated from Egyptian soda lakes. Optimization of the nutritional and cultivation conditions resulted in increase of enzyme yield by 20 fold. Strain AK-R and its extracellular alkaline protease with salt, pH and temperature, tolerance signify their potential application in laundry and pharmaceuticals industries.

Proteases alcalinas são enzimas hidrolíticas que quebram ligações peptídicas em proteínas e peptídeos em condições alcalinas, o que ocupa uma importância fundamental em relação às suas aplicações industriais. Este estudo teve como objetivo isolar novas proteases alcalinas e produzir bactérias alcalófilas a partir dos lagos salgados alcalinos egípcios e otimizar o processo de fermentação para aumentar a produção de enzimas. O extensivo processo de triagem das amostras coletadas dos lagos salgados alcalinos egípcios resultou no isolamento de uma protease alcalina potente produzindo uma estirpe alcalófila AK-R. O isolado foi identificado como sendo a estirpe AK-R de Bacillus agaradhaerens baseado na análise de genes 16S rRNA (99%). O farelo de trigo e a gelatina suportaram a produção máxima de protease alcalina como fontes de carbono e nitrogênio, respectivamente. A estirpe AK-R é uma bactéria alcalófila halotolerante e termotolerante, pois pode crescer dentro de uma vasta gama de concentrações de NaCl (até 25%) e até 55ºC, com crescimento e produção de enzimas máximos a 2.5-5% e pH 11 a 35ºC. Dentre os cátions testados, somente os íons Mg2+ e Ca2+ aumentaram significativamente a produção de enzimas em cerca de 1.2 e 1.3 em comparação ao controle, respectivamente. A secreção de protease alcalina foi coerente com o padrão de crescimento, atingindo o rendimento máximo após 32h (fase estacionária média). Pode-se concluir que uma nova estirpe AK-R de Bacillus agaradhaerens halotolerante, termotolerante e alcalófila produtora de protease alcalina foi isolada a partir dos lagos salgados alcalinos egípcios. A otimização das condições de nutrição e cultivo resultou num aumento da produção de enzima em 20 vezes. A estirpe AK-R e a sua protease alcalina extracelular com tolerância ao sal, pH e temperatura tornam significantes as suas potenciais aplicações nas indústrias farmacêutica e de lavanderia.

Actividad de las enzimas hidrolíticas en cepas del hongo shiitake (Lentinula edodes) cultivadas en pulpa de café / Hydrolytic enzyme activities in shiitake mushroom (Lentinula edodes) strains cultivated on coffee pulp

Se estudió la producción de enzimas hidrolíticas (celulasas, laminarinasas y xilanasas) en cultivos de Lentinula edodes en pulpa de café estéril. Se tomaron muestras de sustrato colonizado por el micelio después de 7, 14, 21, 28 y 35 días de incubación a 25°C (W1 a W5) y durante el período de fructificación en diferentes etapas: formación de primordios (PF), primera cosecha (H) y una semana después de la primera cosecha (PH). La actividad enzimática fue menor al inicio del crecimiento micelial y mostró mayores niveles en la formación y el desarrollo de basidiomas. Durante la etapa reproductiva del hongo, las muestras se sometieron a un tratamiento de remojo. Sin embargo, no fue posible relacionar este tratamiento con el aumento de la producción de enzimas. Los niveles de actividad enzimática sugieren que la secreción de las enzimas estudiadas no influye en la capacidad de adaptación de las cepas al sustrato

Hydrolytic enzyme production (cellulases, laminarinases and xylanases) was studied in cultures of Lentinula edodes on sterilized coffee pulp. Samples of substrate colonized by mycelia were taken after 7, 14, 21, 28 and 35 days of incubation at 25°C (W1 to W5) and during the fruiting period at different stages: formation of primordia (PF), first harvest (H) and one week after the first harvest (PH). The enzymatic activity was lower during the early mycelial growth and showed higher levels during the formation and development of fruiting bodies. During the reproductive stage of the fungus, the samples were subjected to a soaking treatment; however, it was not possible to relate this soaking treatment to the increase in enzyme production. The levels of enzymatic activity suggest that secretion of the studied enzymes does not influence the adaptability of the strains to the substrate

Characterization Of A Novel Hydrolytic Enzyme Producing Thermophilic Bacterium Isolated From The Hot Spring Of Azad Kashmir-Pakistan

ABSTRACT A thermophilic bacterium (TP-2) was isolated from the Tatta Pani hot spring in Azad Kashmir and was characterized using phenotypic and genotypic characters. The strain developed cream colored, round, smooth, flat and slimy colonies while the cells were Gram positive rods that ranged in size from about 2.1-3.6 μm to 0.2-0.3 μm in width. Sequence analysis of its 16S rRNA gene showed that isolate TP-2 had 89% homology with Geobacillus debilis. It grew within pH range of 5.5 to 8.5 with optimum growth at pH 7.0. The isolate showed optimum growth at 65ºC and gave positive results for gelatin hydrolysis (GEL), ortho nitrophenyl-β-D-galactopyranosidase (ONPG), and nitrate production and produced acid from sucrose, glucose and maltose. It utilized glucose, fructose, maltose, lactose, sucrose, xylan, starch, filter paper and carboxymethylcellulose as sole carbon source. Isolate TP-2 produced significant amount of industrially important enzymes i.e. extracellular α-amylase, CMCase, FPase, Xylanase, Protease and Lipase and intracellular CMCase and FPase.

Solid-state fermentation of brewer's spent grain for xylanolytic enzymes production by Penicillium janczewskii and analyses of the fermented substrate / Fermentação em estado sólido com bagaço de cevada para produção de enzimas xilanolíticas por Penicillium janczewskii e análise do substrato fermentado

In recent decades, increasing interest has been devoted to xylanolytic enzymes due to their potential use in many industrial processes. This study describes the production of xylanase, -xylosidase and -Larabinofuranosidase, belonging to the xylanolytic complex, by Penicillium janczewskii using brewer's spent grain as substrate for solid-state fermentation. The optimized conditions for high levels of xylanase, -xylosidase and -Larabinofuranosidase production were: 50% initial moisture, which was provided by Vogel's salt solution, seven days of cultivation at 20-30 °C. Fermentation enriched the bioproduct with some amino acids and did not add mycotoxins to it. The use of brewer's spent grain as substrate for fungal cultivation and enzyme production can both add value to this waste and reduce the production cost of xylanolytic enzymes.

Nas últimas décadas, há interesse crescente nas enzimas xilanolíticas devido à sua potencial utilização em muitos processos industriais. Este estudo descreve a produção de xilanase, -xilosidase e -Larabinofuranosidase, três enzimas do complexo xilanolítico, por Penicillium janczewski utilizando bagaço de cevada como substrato para fermentação em estado sólido. As condições selecionadas para a produção de elevados níveis de xilanase, - xilosidase e -L-arabinofuranosidase por esta linhagem fúngica foram 50% de umidade inicial, sendo esta fornecida por uma solução de sais de Vogel e cultivo por sete dias a 20-30 °C. O bioproduto fermentado foi enriquecido com alguns aminoácidos e se apresentou livre de micotoxinas. O uso do bagaço de cerveja como substrato para o cultivo de fungos e produção de enzimas não só pode agregar valor a esses resíduos, mas também reduzir o custo de produção de enzimas xilanolíticas.

Ethanol induction of laccase depends on nitrogen conditions of Pycnoporus sanguineus

Background Ethanol has been pointed out as a laccase inducer. However, there are controversial reports about its efficiency with some fungi. In this study, we hypothesized that ethanol laccase induced in Pycnoporus sanguineus depends on nitrogen nutriment conditions. To prove this, we assessed laccase production in submerged cultures of P. sanguineus, with different nitrogen concentrations and with, or without ethanol added in a factorial designed experiment. Results In order to analyze the effects of factors on the response variables, a factorial ANOVA, and response-surface models were performed. It was found that the nitrogen source was the main factor that affected laccase production in P. sanguineus. The treatments with yeast extract (2 g/L) and ethanol (3 g/L) induced the highest laccase activity (31.01 ± 4.9 U/L), while the treatments with urea reached the lowest activity (less than 1.6 U/L). Ethanol had positive and synergic effects on laccase production, in accordance with the surface response model, as long as simple nitrogen sources (urea) were not available. Conclusions We suggest that laccase in P. sanguineus is regulated by a catabolic nitrogen repression mechanism; laccase activity is strongly inhibited by urea used as nitrogen source and it decreases when the amount of urea increases; contrarily, a synergic positive effect was observed between yeast extract and ethanol on laccase production.

A biotechnology perspective of fungal proteases

Proteases hydrolyze the peptide bonds of proteins into peptides and amino acids, being found in all living organisms, and are essential for cell growth and differentiation. Proteolytic enzymes have potential application in a wide number of industrial processes such as food, laundry detergent and pharmaceutical. Proteases from microbial sources have dominated applications in industrial sectors. Fungal proteases are used for hydrolyzing protein and other components of soy beans and wheat in soy sauce production. Proteases can be produced in large quantities in a short time by established methods of fermentation. The parameters such as variation in C/N ratio, presence of some sugars, besides several other physical factors are important in the development of fermentation process. Proteases of fungal origin can be produced cost effectively, have an advantage faster production, the ease with which the enzymes can be modified and mycelium can be easily removed by filtration. The production of proteases has been carried out using submerged fermentation, but conditions in solid state fermentation lead to several potential advantages for the production of fungal enzymes. This review focuses on the production of fungal proteases, their distribution, structural-functional aspects, physical and chemical parameters, and the use of these enzymes in industrial applications.

Aspergellus niger como produtor de enzimas celuloliticas a partir farelo de cacau (theobroma cacao) / Aspergellus niger as a producer of cellulolytic enzymes from cocoa (Theobroma cacao) meal

O objetivo deste trabalho foi estudar a aplicação do fungo Aspergillus niger como produtor das enzimas celulolíticas CMCase, FPase e Xilanase, através da fermentação em estado sólido de cacau (Theobroma cacao). Avaliaram-se o efeito do tempo de fermentação (24, 72, e 120 horas) e da atividade de água (0,963; 0,976 e 0,983) sobre a produção das enzimas. As fermentações foram realizadas a 30º C em estufa bacteriológica. A otimização das condições ideais para produção de enzimas foi realizada a partir da Metodologia de Superfície de Resposta (MSR). Estatisticamente, as melhores atividades para a CMCase obtidas foram 14,18 U/mL em 0,972 aw e 70,07 horas de fermentação, para a FPase 7,51 U/mL 0,974 aw 80,56 horas e para a Xilanase foi 11,86 U/mL 0,971 aw e 64,24 horas.

Aspergellus niger as a producer of cellulolytic enzymes from cocoa (Theobroma cacao) meal. The aim of this work was to study the application of the fungus Aspergillus niger as a producer of the cellulolytic enzymes CMCase, FPase and Xylanase by solid-state fermentation of cocoa (Theobroma cacao). We evaluated the effect of fermentation time (24, 72, and 120 hours) and water activity (0.963, 0.976 and 0.983) on the production of enzymes. Fermentations were performed at 30º C in a bacteriological incubator. The optimization of ideal conditions for enzyme production was carried out using the response surface methodology (RSM). Statistically, the best activity obtained for CMCase was 14.18 U/mL at aw 0.972 and 70.07 hours fermentation, for FPase it was 7.51 U/mL at 0.974 aw and 80.56 hours, while for Xylanase was 11.86 U/mL at aw 0.971 and 64.24 hours.

Application of microbial α-amylase in industry - A review

Amylases are one of the main enzymes used in industry. Such enzymes hydrolyze the starch molecules into polymers composed of glucose units. Amylases have potential application in a wide number of industrial processes such as food, fermentation and pharmaceutical industries. α-Amylases can be obtained from plants, animals and microorganisms. However, enzymes from fungal and bacterial sources have dominated applications in industrial sectors. The production of α-amylase is essential for conversion of starches into oligosaccharides. Starch is an important constituent of the human diet and is a major storage product of many economically important crops such as wheat, rice, maize, tapioca, and potato. Starch-converting enzymes are used in the production of maltodextrin, modified starches, or glucose and fructose syrups. A large number of microbial α-amylases has applications in different industrial sectors such as food, textile, paper and detergent industries. The production of α-amylases has generally been carried out using submerged fermentation, but solid state fermentation systems appear as a promising technology. The properties of each α-amylase such as thermostability, pH profile, pH stability, and Ca-independency are important in the development of fermentation process. This review focuses on the production of bacterial and fungal α-amylases, their distribution, structural-functional aspects, physical and chemical parameters, and the use of these enzymes in industrial applications.