Clinical evaluation of retention strength of two different adhesive systems on glass fiber-reinforced posts / 口腔疾病防治

Objective@# To evaluate the clinical effect of two different resin cements on the glass fiber-reinforced posts.@*Methods @# One hundred and thirty-six teeth were randomly divided into two groups, with sixty-eight in each. Group A used Multilink N self-etch system and group B used RelyX Unicem self-adhesive system to bond fiber posts. Follow-up examinations took place at 6, 12 and 24 months after the placement. @*Results @#The success ratios of two groups were all 97% above and there was no significant difference between two groups (P > 0.05). @*Conclusion@#Multilink N self-etch system and RelyX Unicem self-adhesive system all have good effect on glass fiber-reinforced posts bonding.

Effect of different adhesive systems and post surface treatments on the push-out bond strengths of fiber-reinforced post / 대한치과보철학회지

PURPOSE: The purpose of this study was to evaluate the push-out bond strength of glass-fiber post cemented with different adhesive systems and surface treatments. MATERIALS AND METHODS: 160 tooth samples made from 48 human maxillary single-rooted teeth with similar root length were divided into 4 groups according to the adhesive system (no adhesive, Adper Single Bond 2, Clearfil SE Bond, Clearfil S3). Each group had 4 subgroups according to the post surface treatment methods (no treatment, sandblast, silane, sandblast and silane). Posts (Parapost Fiber White) were cemented with Rely X Unicem. The teeth were sectioned perpendicular to their long axis into 1-mm thick sections. The push-out tests was performed at a speed of 0.5 mm/min. The results were evaluated by 2-way ANOVA, 1-way ANOVA and multiple comparison procedures (Tukey test) (α=0.05). RESULTS: Tukey test showed that the adhesive system significantly influenced the push-out strength. The Clearfil SE Bond group showed the highest value. Post surface treatments showed no significant effect. CONCLUSION: Bond strength of glass-fiber post cemented with self-adhesive resin cement using Clearfil SE Bond showed significantly higher values compared to other adhesive systems.

In vitro study of microleakage of endodontically treated teeth restored with different adhesive systems and fiber-reinforced posts / 대한치과보철학회지

PURPOSE: While studies have examined microleakage in endodontically treated teeth restored with posts, microleakage among post and adhesive systems remains a concern. This study compared the sealing properties of 3 adhesively luted post systems. MATERIALS AND METHODS: Thirty-six endodontically treated permanent maxillary central incisors were divided into 3 groups: Zirconia-glass fiber, Quartz-glass fiber, Polyethylene fiber posts. Post space was prepared and each post was adhesively luted with 3 systems. The specimens were separately immersed in freshly prepared 2% methylene blue solution for 1 week. The cleaned specimens were then embedded in autopolymerizing acrylic resin. The root portion of tooth were horizontally sectioned into three pieces (apical, middle, and coronal portions). An occlusal view of each section was digitally photographed with a stereomicroscope. The methylene blue-infiltrated surface for each specimen was measured. Dye penetration was estimated as the ratio of the methylene blue-infiltrated surface to the total dentin surface. RESULTS: No significant differences were found among post types. The variables of middle section and 3-stage adhesive produced significant differences in microleakage between the following post pairs: zirconia-glass fiber versus quartz-glass fiber, zirconia-glass fiber versus polyethylene fiber, and quartz-glass fiber versus polyethylene fiber (P<.05). There were significant differences between the apical and coronal sections of each post type, and between apical versus middle sections of quarze-glass fiber and polyethylene fiber posts (P<.05). CONCLUSION: No significant differences were found among post types. The 3-stage adhesive produced significant differences in microleakage between the following post pairs.

Influence of modification in core building procedure on fracture strength and failure patterns of premolars restored with fiber post and composite core

PURPOSE: The influence of the modified process in the fiber-reinforced post and resin core foundation treatment on the fracture resistance and failure pattern of premolar was tested in this study. MATERIALS AND METHODS: Thirty-six human mandibular premolars were divided into 4 groups (n = 9). In group DCT, the quartz fibre post (D.T. Light-post) was cemented with resin cement (DUO-LINK) and a core foundation was formed with composite resin (LIGHT-CORE). In group DMO and DMT, resin cement (DUO-LINK) was used for post (D.T. Light-post) cementation and core foundation; in group DMO, these procedures were performed simultaneously in one step, while DMT group was accomplished in separated two steps. In group LCT, the glass fiber post (LuxaPost) cementation and core foundation was accomplished with composite resin (LuxaCore-Dual) in separated procedures. Tooth were prepared with 2 mm ferrule and restored with nickel-chromium crowns. A static loading test was carried out and loads were applied to the buccal surface of the buccal cusp at a 45 degree inclination to the long axis of the tooth until failure occurred. The data were analyzed with MANOVA (alpha = .05). The failure pattern was observed and classified as either favorable (allowing repair) or unfavorable (not allowing repair). RESULTS: The mean fracture strength was highest in group DCT followed in descending order by groups DMO, DMT, and LCT. However, there were no significant differences in fracture strength between the groups. A higher prevalence of favorable fractures was detected in group DMT but there were no significant differences between the groups. CONCLUSION: The change of post or core foundation method does not appear to influence the fracture strength and failure patterns.

Influence of modification in core building procedure on fracture strength and failure patterns of premolars restored with fiber post and composite core

PURPOSE: The influence of the modified process in the fiber-reinforced post and resin core foundation treatment on the fracture resistance and failure pattern of premolar was tested in this study. MATERIALS AND METHODS: Thirty-six human mandibular premolars were divided into 4 groups (n = 9). In group DCT, the quartz fibre post (D.T. Light-post) was cemented with resin cement (DUO-LINK) and a core foundation was formed with composite resin (LIGHT-CORE). In group DMO and DMT, resin cement (DUO-LINK) was used for post (D.T. Light-post) cementation and core foundation; in group DMO, these procedures were performed simultaneously in one step, while DMT group was accomplished in separated two steps. In group LCT, the glass fiber post (LuxaPost) cementation and core foundation was accomplished with composite resin (LuxaCore-Dual) in separated procedures. Tooth were prepared with 2 mm ferrule and restored with nickel-chromium crowns. A static loading test was carried out and loads were applied to the buccal surface of the buccal cusp at a 45 degree inclination to the long axis of the tooth until failure occurred. The data were analyzed with MANOVA (alpha = .05). The failure pattern was observed and classified as either favorable (allowing repair) or unfavorable (not allowing repair). RESULTS: The mean fracture strength was highest in group DCT followed in descending order by groups DMO, DMT, and LCT. However, there were no significant differences in fracture strength between the groups. A higher prevalence of favorable fractures was detected in group DMT but there were no significant differences between the groups. CONCLUSION: The change of post or core foundation method does not appear to influence the fracture strength and failure patterns.

Bond strength between fiber posts and composite resin core: influence of temperature on silane coupling agents

This study evaluated the effect of air drying temperature and different silane coupling agents on the bond strength between glass fiber posts and composite resin core. The post surface was cleaned with alcohol and treated with different silane coupling agents, being three prehydrolyzed silanes [Silano (Angelus), Prosil (FGM), RelyX Ceramic Primer (3M ESPE)] and one two-component silane [Silane Coupling Agent (Dentsply)]. Two post-silanization air drying temperatures, 23ºC and 60ºC, were applied. A cylindrical plastic matrix was placed around the silanized post and filled with composite resin. Each bonded post provided 7 slices for push-out testing. Each slice was loaded to failure under compression at a cross-head speed of 0.5 mm/min. Data were analyzed by two-way ANOVA and Scott-Knott tests (α=0.05). Dunnett's test was used to compare the mean of the control group with that of each experimental group. Scanning electron microscopy (SEM) was used to evaluate the interface of the fractured slices. For the 23ºC air drying temperature, the use of RelyX Ceramic Primer resulted in significantly lower bond strength than the other silane coupling agents, while the bond strength with Silane Coupling Agent was the highest of all groups. Only with Silane Coupling Agent, the bond strength for the 23ºC air drying temperature was significantly higher than that for 60ºC air drying. In conclusion, the use of warm air drying after silane application produced no increase in the bond strength between the fiber-reinforced composite post and the composite core. The two-component silane produced higher bond strength than all prehydrolyzed silanes when it was used with air drying at room temperature.

Este estudo avaliou o efeito da temperatura do ar e diferentes silanos na resistência de união entre pino de fibra e resina composta. Os pinos foram limpos com álcool e tratados com diferentes silanos: três pré-hidrolizados [Silano (Angelus), Prosil (FGM), RelyX Ceramic Primer (3M ESPE)] e um de dois componentes [Silane Coupling Agent (Dentsply)]. Duas temperaturas (23ºC e 60ºC) para secagem do silano foram aplicadas. Matriz plástica cilíndrica foi posicionada em torno do pino já silanizado, e preenchida com resina composta simulando núcleo de preenchimento. Cada cilindro obtido pela união pino/preenchimento foi seccionado, gerando 7 fatias para ensaio mecânico de push-out. Aplicou-se sobre cada fatia carregamento de compressão, com velocidade de 0,5 mm/min, até a falha da amostra. Os dados foram analisados pela ANOVA e teste Scott-Knott (α=0,05). Utilizou-se teste de Dunnett para comparação do grupo controle com cada um dos outros grupos experimentais. Após ensaio mecânico, observaram-se as amostras em microscópio eletrônico de varredura. Para 23ºC, RelyX Ceramic Primer apresentou os menores valores de resistência de união, enquanto o Silane Coupling Agent (Dentsply) obteve os maiores valores. Para o Silane Coupling Agent (Dentsply), os valores de resistência de união foram maiores para temperatura de 23ºC do que 60ºC. Em conclusão, o uso de ar quente após aplicação do silano não gerou aumento nos valores de resistência de união entre pino de fibra e material de preenchimento de resina composta. O silano de dois componentes apresentou maior resistência de união do que todos os silanos pré-hidrolizados quando usados na temperatura ambiente.

An evaluation of glass fiber-reinforced composite resin post core for severe defect restoration of front teeth / 实用口腔医学杂志

In order to explore the clinical effect of the glass fiber-reinforced composite resin post core for severe defect restoration of front teeth,sixty-two teeth were restored for forty-one patients with severe defect restoration of front teeth by glass fiber-reinforced composite resin post core plus alumina all-ceramic crown.Through 0.6-2.0 years follow up,all the prosthesis worked very well without breaking or falling off,no gum coloring except two posts fell off after the restoration at sixth month.The patients satisfied with the restoration.