High risk factors in images for infiltrating lung adenocarcinoma manifesting as peripheral ground-glass nodules / 中国胸心血管外科临床杂志

@#Objective     To explore the correlation between the imaging features of peripheral ground-glass pulmonary nodules and the invasion degree of lung adenocarcinoma, and the high risk factors for infiltrating lung adenocarcinoma under thin-slice CT, which provides some reference for clinicians to plan the surgical methods of pulmonary nodules before operation and to better communicate with patients, and assists in building a clinical predictive model for invasive adenocarcinoma. Methods    Clinical data of the patients with peripheral ground-glass pulmonary nodules (diameter≤3 cm) in thin-slice chest CT in the First Affiliated Hospital of Soochow University from January 2019 to January 2020 were continuously collected. All patients underwent thin-slice CT scan and thoracoscopic surgery in our center. According to the pathological examination results, they were divided into two groups: an adenocarcinoma lesions before infiltration group, and an invasive lung adenocarcinoma group. The thin-slice CT imaging parameters of pulmonary nodules were collected. The nodular diameter, mean CT value, consolidation tumor ratio (CTR), nodular shape, vacuolar sign, bronchial air sign, lobulation sign, burr sign, lesion boundary, pleural depression sign, vascular cluster sign and other clinical data were collected. Univariate and multivariate analyses were conducted to analyze the independent risk factors for the infiltrating lung adenocarcinoma, and to analyze the threshold value and efficacy of each factor for the identification of infiltrating lung adenocarcinoma. Results     Finally 190 patients were enrolled. There were 110 patients in the adenocarcinoma lesions before infiltration group, including 21 males and 89 females with a mean age of 53.57±10.90 years, and 80 patients in the invasive lung adenocarcinoma group, including 31 males and 49 females with a mean age of 56.45±11.30 years. There was a statistical difference in the mean CT value, nodular diameter, CTR, gender, smoking, nodular type, nodular shape, vacuolar sign, lobulation sign, burr sign, lesion boundary, pleural depression sign, vascular cluster sign between the two groups (P<0.05). However, there was no statistical difference between the two groups in age (P=0.081), lesion site (P=0.675), and bronchial air sign (P=0.051). Multiple logistic regression analysis showed that nodular diameter, mean CT value, CTR and lobulation sign were independent risk factors for differentiating preinvasive adenocarcinoma from invasive adenocarcinoma. At the same time, the threshold value was calculated by Youden index, indicating that the CTR was 0.45, the nodal diameter was 10.5 mm and the mean CT value was –452 Hu. Conclusion     In the peripheral ground-glass pulmonary nodules, according to the patient's CT imaging features, such as mixed ground-glass nodules, irregular shapes, vacuoles, short burrs, clear boundaries, pleural indentations, and vascular clusters, have a certain reference value in the discrimination of the invasion degree of ground-glass pulmonary nodules. At the same time, it is found in this research that peripheral ground-glass pulmonary nodules with diameter greater than 10.5 mm, CT value greater than –452 Hu, CTR greater than 0.45 and lobulation sign are more likely to be infiltrating lung adenocarcinoma.

Invasiveness assessment by CT quantitative and qualitative features of lung cancers manifesting ground-glass nodules in 555 patients: A retrospective cohort study / 中国胸心血管外科临床杂志

@#Objective     To explore the correlation between the quantitative and qualitative features of CT images and the invasiveness of pulmonary ground-glass nodules, providing reference value for preoperative planning of patients with ground-glass nodules. Methods    The patients with ground-glass nodules who underwent surgical treatment and were diagnosed with pulmonary adenocarcinoma from September 2020 to July 2022 at the Third Affiliated Hospital of Kunming Medical University were collected. Based on the pathological diagnosis results, they were divided into two groups: a non-invasive adenocarcinoma group with in situ and minimally invasive adenocarcinoma, and an invasive adenocarcinoma group. Imaging features were collected, and a univariate logistic regression analysis was conducted on the clinical and imaging data of the patients. Variables with statistical difference were selected for multivariate logistic regression analysis to establish a predictive model of invasive adenocarcinoma based on independent risk factors. Finally, the sensitivity and specificity were calculated based on the Youden index. Results     A total of 555 patients were collected. The were 310 patients in the non-invasive adenocarcinoma group, including 235 females and 75 males, with a meadian age of 49 (43, 58) years, and 245 patients in the invasive adenocarcinoma group, including 163 females and 82 males, with a meadian age of 53 (46, 61) years. The binary logistic regression analysis showed that the maximum diameter (OR=4.707, 95%CI 2.060 to 10.758), consolidation/tumor ratio (CTR, OR=1.027, 95%CI 1.011 to 1.043), maximum CT value (OR=1.025, 95%CI 1.004 to 1.047), mean CT value (OR=1.035, 95%CI 1.008 to 1.063), spiculation sign (OR=2.055, 95%CI 1.148 to 3.679), and vascular convergence sign (OR=2.508, 95%CI 1.345 to 4.676) were independent risk factors for the occurrence of invasive adenocarcinoma (P<0.05). Based on the independent predictive factors, a predictive model of invasive adenocarcinoma was constructed. The formula for the model prediction was: Logit(P)=–1.293+1.549×maximum diameter of lesion+0.026×CTR+0.025×maximum CT value+0.034×mean CT value+0.72×spiculation sign+0.919×vascular convergence sign. The area under the receiver operating characteristic curve of the model was 0.910 (95%CI 0.885 to 0.934), indicating that the model had good discrimination ability. The calibration curve showed that the predictive model had good calibration, and the decision analysis curve showed that the model had good clinical utility. Conclusion     The predictive model combining quantitative and qualitative features of CT has a good predictive ability for the invasiveness of ground-glass nodules. Its predictive performance is higher than any single indicator.

Clinical application of lithium disilicate glass ceramic cantilever resin-bonded fixed partial denture in the restoration of single anterior tooth loss / 口腔疾病防治

Objective@#To investigate the clinical effect of lithium disilicate glass ceramic cantilever resin-bonded fixed partial dentures (CRBFPDs) on single anterior tooth loss to provide a reference for the selection of restoration methods for single anterior tooth loss.@*Methods@#This study was reviewed and approved by the Ethics Committee, and informed consent was obtained from the patients. Forty-two patients with less than two anterior teeth with monomaxillary loss were included in this study. After 6 months, 1 year, 2 years, and 3 years, the aesthetic and functional effects of the restorations and the periodontal health status were evaluated, and the visual analog scale (VAS) was used to assess patient satisfaction.@*Results@#During the observation period, the connector fractured in one case within 3 months. One case had debonded within 2 years. The aesthetic restoration effect of all lithium disilicate glass ceramic CRBFPDs was categorized as Class A. The periodontal health was good, there was no clinical absorption in the soft and hard tissues of the abutment or subbridge, periodontal status according to the evaluation indices was classified as class A, and the total satisfaction rate of the patient was 100%.@*Conclusion@#For single anterior tooth loss patients, lithium disilicate glass ceramic cantilever resin-bonded fixed partial denture can achieve the restoration effect of less invasion, better adhesion, aesthetics, comfort and good biocompatibility. With high patient satisfaction, it can be considered an ideal restoration method for replacing a single anterior tooth.

Comparative study of physical-chemical properties of bioactive glass ionomer cement

Abstract This study analyzed the physical-chemical properties of bioactive ionomer materials. Cention N bioactive materials were evaluated chemically activated (CN) and light-cured (CN-LC), Equia Forte Fill (EQUI); conventional resin composite Filtek Z350 XT (Z350); resin glass ionomer cement Riva light Cure (RIVA) and flowable resin composite Filtek Bulk Fill Flow (BULK-F) were evaluated. Sixty specimens (n=10) were prepared for sorption (SR), solubility (SL), flexural strength (FS), shrinkage stress (SS), conversion degree (CD), microhardness (MI), and surface roughness (SR) tests. Non-cured and light-cured materials were assessed on FTIR. 30 human molar teeth were used in the bond strength test (BS). Data were subjected to ANOVA and post-hoc Tukey's test (5% of significance). EQUI showed more sorption in SR and no statistical difference from RIVA and CN-LC. CN group showed more solubility and EQUI presented less (p<0.05). BULK-F showed higher FS (MPa), without differences from CN and Z350, whereas EQUI presented the lowest FS not differing from RIVA. BULK-F and CN-LC showed more shrinkage stress differing from EQUI. CN-LC and CN showed higher CD differing from the other which showed no differences (p>0.05) between them. EQUI showed the highest hardness (p<0.05) in MI. There were no differences (p>0.05) in SR (µm). Z350 and BULK-F presented higher BS, whereas CN-LC showed the lowest, although not differing from EQUI and RIVA. Equia Forte's solubility and microhardness make it a good alternative as a restorative material. Cention N degree of conversion and flexural strength making it an esthetic option to amalgam.

Resumo Este estudo analisou as propriedades físico-químicas dos materiais de ionômero bioativo. Os materiais bioativos Cention N quimicamente ativados (CN) e fotopolimerizados (CN-LC), Equia Forte Fill (EQUI); resina composta convencional Filtek Z350 XT (Z350); resina de ionômero de vidro Riva light Cure (RIVA) e resina composta fluida Filtek Bulk Fill Flow (BULK-F) foram avaliados. Sessenta espécimes (n=10) foram preparados para testes de sorção (SR), solubilidade (SL), resistência à flexão (FS), tensão de contração (SS), grau de conversão (CD), microdureza (MI) e rugosidade da superfície (SR). Os materiais não curados e curados com luz foram avaliados por FTIR. 30 dentes molares humanos foram usados no teste de resistência de união (BS). Os dados foram submetidos a ANOVA e teste de post-hoc Tukey (5% de significância). O EQUI apresentou maior sorção no SR e não mostrou diferença estatística em relação aos grupos RIVA e CN-LC. O grupo CN apresentou maior solubilidade e o EQUI apresentou menor (p<0,05). O BULK-F apresentou maior FS (MPa), sem diferir do CN e do Z350, enquanto o EQUI apresentou o menor FS, não diferindo do RIVA. O BULK-F e o CN-LC apresentaram maior estresse de contração, diferindo do EQUI. O CN-LC e o CN apresentaram maior CD (%), diferindo dos demais, que não apresentaram diferenças (p>0,05) entre si. A EQUI apresentou a maior dureza (p<0,05) no MI. Não houve diferenças (p>0,05) na SR (µm). Z350 and BULK-F apresentaram BS, enquanto a CN-LC apresentou a menor, embora não diferindo da EQUI e da RIVA. A solubilidade e a microdureza do Equia Forte o tornam uma boa alternativa como material restaurador. O grau de conversão e a resistência à flexão do Cention N o tornam uma opção estética ao amálgama.

The use of rubber dam in the survival of RMGIC restorations in primary molars: a 30-month randomized controlled clinical trial

Abstract This study was a randomized controlled clinical trial with two parallel arms and the objective was to compare the survival of resin modified glass ionomer (RMGIC) restorations in primary teeth using rubber dam or cotton roll isolation after a 30-month follow-up period. Ninety-two children (mean age 6.8 ± 1.37) and 200 primary molars with occlusal or occluso-proximal cavitated dentin caries lesions were randomly assigned into two groups: cotton rolls and rubber dam. All lesions were restored using RMGIC (RIVA Light Cure) after selective caries removal. Restorative failure and lesion arrestment were evaluated by two independent, trained, and calibrated examiners through clinical and radiographic examinations. The Kaplan-Meier test was used to assess the survival of restorations and Cox regression was used to assess the association of risk factors with restorative failure. There was no significant difference in survival rates between groups (p = 0.17). Older age (HR = 2.81 [95%CI: 1.47-5.44]) and higher rate of gingival bleeding (HR = 0.47 [95%CI: 0.23-0.99]) were associated with restorative failure. No patient had painful symptoms, pulp outcomes, or radiographic changes compatible with lesion progression. The use of rubber dam isolation did not increase the survival rate of occlusal and occluso-proximal restorations using RMGIC in primary molars after 30 months of follow-up. Since the survival is not influenced by the type of isolation, the professional can safely choose the appropriate technique for each case, considering his experience and preferences, as well as those of the patient.

In vitro characterization of a novel resin-based restorative material containing alkaline fillers

Abstract Objective: In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials—a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)—were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity. Methodology: The microshear bond strength to dentin and microleakage of Cention N were evaluated with and without the application of an adhesive system (Tetric N Bond Universal). A one-way ANOVA test was used to analyze the data in terms of degree of conversion, KHN ratio, water sorption, water solubility, microshear bond strength to dentin, and radiopacity. A two-way ANOVA test (carried out considering the material type and ethanol aging as factors) was used to analyze the data in terms of flexural strength and elastic modulus. The Kruskal-Wallis test was used to statistically analyze the data on microleakage. A significance level of α=0.05 was used for all tests. Results: Fuji II LC was found to have the highest degree of conversion, water sorption, and microleakage, as well as the lowest flexural strength. Cention N had the highest solubility; when used with an adhesive system, it achieved bond strength and microleakage similar to those of the Tetric N Ceram composite. Tetric N Ceram had the highest degree of conversion, KHN ratio, and radiopacity. Conclusion: The properties of Cention N validate its efficacy as an alternative direct restorative material when used in conjunction with an adhesive system.

Insertion methods and gap/void formation in atraumatic restorative technique: A micro-CT analysis

Abstract Wetting the dentin is critical to atraumatic restorative treatment. The conventional insertion can be challenging when using high-viscosity glass-ionomer cement. This study evaluated the formation of gaps and voids after three insertion methods using micro-CT. Teeth underwent removal of occlusal and proximal caries through the atraumatic restorative treatment technique. Then, they were fixed in an artificial dental arch to simulate the clinical condition and were restored using three insertion methods: conventional, Centrix injection, and double-filling. Previous dentin conditioning procedures, steel matrix and wooden wedge application, and post-insertion procedures (digital compression and surface protection) were the same. The material was inserted using a manual instrument in the conventional technique and was inserted with a syringe in the Centrix injection group. In the double-filling technique, the tooth received a first layer of a flowable ionomer (through modifying the powder/liquid ratio), and a second layer (with standard ratio) was applied before the final set of the first one. A micro-CT unit scanned each tooth before and after restoration. Each cavity was defined as the volume of interest, and the volumes of gaps and voids were calculated. Data were analyzed using one-way ANOVA and Tukey posthoc test (p < .05). Double-filling had improved filling volume with lower values for gap volume, followed by Centrix injection. The conventional technique had the highest gap volume. No statistically significant difference was observed for void volume. Double-filling demonstrated fewer gaps, followed by Centrix injection, which is critical to obtain better adhesive, remineralizing, and antibacterial activities.

Resumo O molhamento da dentina parcialmente desmineralizada no fundo da cavidade dentária é fundamental para o sucesso do tratamento restaurador atraumático. No entanto, o método de inserção convencional pode ser desafiador ao usar cimento de ionômero de vidro de alta viscosidade. Este estudo avaliou a formação de gaps e vazios internos após três métodos de inserção de cimento de ionômero de vidro de alta viscosidade usando micro-CT. Dez terceiros molares foram submetidos à remoção de cárie oclusal através da técnica de tratamento restaurador atraumático e complementação proximal (com ou sem lesão pré-existente). Em seguida, foram fixados em uma arcada dentária artificial para simular a condição clínica. Os dentes foram restaurados usando a técnica de tratamento restaurador atraumático com três métodos de inserção: convencional, injeção Centrix e dupla inserção. Os procedimentos anteriores de condicionamento dentinário, inserção de matriz de aço, aplicação de cunha de madeira e procedimentos pós-inserção do material (como compressão digital e proteção de superfície) foram os mesmos para os três grupos testados. O material foi inserido com instrumento manual na técnica convencional, seguindo a metodologia clássica do tratamento restaurador atraumático. O material foi inserido com um dispositivo desenvolvido especificamente para esse fim na técnica de inserção com seringa tipo Centrix. Na técnica de dupla obturação, o dente recebeu uma primeira camada do cimento de ionômero de vidro mais fluido (obtido através da modificação da relação pó/líquido), e uma segunda camada (com relação pó/líquido padrão) foi aplicada antes da presa final da primeira. Um micro-CT escaneou cada dente antes e depois da restauração. Cada cavidade foi definida como o volume de interesse, e os volumes de gaps e vazios foram calculados. Os dados foram analisados por ANOVA one-way e teste post-hoc de Tukey com nível de significância de 5%. A dupla inserção melhorou significativamente o volume de preenchimento com valores percentuais mais baixos para o volume do gap, seguido pela injeção com seringa tipo Centrix. A técnica convencional apresentou o maior percentual de volume de gap. Nenhuma diferença estatisticamente significativa foi observada para o volume de vazios internos. O grupo de dupla inserção demonstrou menor formação de gaps, seguido pelo grupo de injeção com seringa tipo Centrix, que é fundamental para obter melhores atividades adesivas, remineralizantes e antibacterianas.

Effect of sodium/calcium hypochlorite on adhesion and adaptation of fiber posts luted with a dual resin cement

Abstract This study aimed to evaluate the effect of different concentrations of sodium hypochlorite (NaOCl) and calcium hypochlorite [Ca(OCl)2] on the bond strength and adaptation of glass fiber posts luted with a dual-curing resin cement. Fifty decoronated premolars were sectioned 14 mm from the apex and endodontically treated. The root canal filling was partially removed. The specimens were divided into 5 groups (n=10) according to the irrigant for post space irrigation: 0.9% sodium chloride (NaCl), (control); 2.5% NaOCl; 5.25% NaOCl; 2.5% Ca(OCl)2; and 5.25% Ca(OCl)2. For each group, irrigation was performed with 5 ml of solution. Afterward, the posts were luted with a dual-curing resin cement. One slice from each third was obtained and submitted to the push-out test and failure modes analysis. An additional slice from the middle third was submitted to confocal images for analysis of adaptation failures (gaps). Two-way ANOVA, Tukey's post-hoc, Kruskal-Wallis with Bonferroni adjusted, and chi-square tests, analyzed data. The group treated with 5.25% NaOCl showed lower bond strength values and generated more cohesive failures compared to the control (p < 0.05). Bond strength decreased from coronal to apical in the post space (p < 0.001). The groups treated with NaOCl had the highest percentages of gaps compared to the control (p < 0.05). Regardless of concentration, Ca(OCl)2 did not influence the bond strength and the occurrence of gaps (P > 0.05). Ca(OCl)2 is a good option for irrigating the post space before luting a fiber post with a dual-curing resin cement.

Resumo Este estudo teve como objetivo avaliar o efeito de diferentes concentrações de hipoclorito de sódio (NaOCl) e hipoclorito de cálcio [Ca(OCl)2] na resistência de união e adaptação de pinos de fibra de vidro cimentados com um cimento resinoso dual. Cinquenta pré-molares tiveram suas coroas removidas, foram seccionados a 14 mm do ápice e tratados endodonticamente. A obturação do canal radicular foi parcialmente removida. Os espécimes foram divididos em 5 grupos (n=10) de acordo com o irrigante para irrigação do espaço do pino: cloreto de sódio 0.9% (NaCl), (controle); NaOCl 2.5%; NaOCl 5.25%; Ca(OCl)2 2.5%; e Ca(OCl)2 5.25%. Para cada grupo, a irrigação foi realizada com 5 ml da solução. Posteriormente, os pinos foram cimentados com um cimento resinoso dual. Uma fatia de cada terço foi obtida e submetida ao teste push-out e análise dos modos de falha. Um corte adicional do terço médio foi submetido a imagens confocais para análise de falhas de adaptação (gaps). Os dados foram analisados pelos testes ANOVA de duas vias, post-hoc de Tukey, Kruskal-Wallis com ajuste de Bonferroni e qui-quadrado. O grupo tratado com NaOCl 5.25% apresentou menores valores de resistência de união e gerou mais falhas coesivas em relação ao controle (p < 0.05). A resistência de união diminuiu de coronal para apical no espaço do pino (p < 0.001). Os grupos tratados com NaOCl apresentaram os maiores percentuais de gaps em relação ao controle (p < 0.05). Independentemente da concentração, o Ca(OCl)2 não influenciou a resistência de união e a ocorrência de gaps (P > 0.05). O Ca(OCl)2 é uma boa opção para irrigar o espaço do pino antes de cimentar um pino de fibra com um cimento resinoso dual.

Distribution-and-analysis-of-chest-radiographic-findings-in-covid19-positive-symptomatic-and-asymptomatic-patients—analysis-of-668-patients-in-india

Current COVID-19 radiological literature is dominated by CT and a detailed description of chest x-ray (CXR) appearances in relation to the disease time course is lacking. However, it poses a great challenge on the radiology department, as it is difficult to decontaminate entire CT suite(Zhao et al., 2020)11. This study is aimed to correlate clinical symptoms with the chest X-ray findings in COVID positive patients and to calculate the sensitivity and specificity of chest x ray in diagnosing COVID 19. The present study compares frequency and distribution of chest radiographic findings in COVID 19 positive symptomatic and asymptomatic patients. Patients with a RT-PCR-positive results for COVID 19 infection were 668. Of these, 437 were males (65.4%), 230 females (34.4%) and 1 transgender (0.04%) with a mean age of 44 years (range 2–87 years). Only 18 CXRs were negative for radiological thoracic involvement (6.4%) among symptomatic patients (280). Among the baseline CXR of 668 patients, 375 (56.1%) were normal and 293 (43.8%) were abnormal. Sensitivity and specificity of CXR were 93.91% and 93.3% respectively. Positive and negative predictive values were 90.97% and 95.51% respectively. We found a statistically significant relationship between CXR severity score and age, symptoms, death (P<0.001).We even found significant relationship between age and symptoms, death of COVID positive patients (P<0.001). The relationship between CXR severity and gender, age and gender were not significant (P=0.539, P=0.864 respectively)

The effect of Phytosphingosine and bioactive glass-ceramics in preventing dental enamel erosion

Abstract This study evaluated the effect of phytosphingosine (PHS) and bioactive glass-ceramic (Biosilicate) on dental enamel in terms of color alteration (ΔE), microhardness, and surface roughness when submitted to erosive challenge (EC). Sixty specimens of bovine teeth (6×6×2mm) were obtained. Initial color (Easyshade, VITA), KHN (HMV-2, Shimadzu), and Ra (SJ-201P, Mitutoyo) measurements were performed. Specimens were separated into groups according to treatments: PHS, 10% Biosilicate, PHS+10% Biosilicate, and artificial saliva (control) and submitted to EC with Coca-Cola for 2 min. This cycle was repeated 4 times daily/15 days. Between cycles, specimens remained in artificial saliva (2 h/37°C). After daily cycles, they were also stored in artificial saliva at 37ºC. Final color, microhardness, and surface roughness measurements were done. Color and KHN data were analyzed by one-way ANOVA, Tukey's test; and Ra, by 2-way ANOVA, repeated measures, and Tukey's test (p<.05). The highest ΔE occurred in Saliva+EC (p<.05). Groups treated with PHS presented lower color change than Saliva+EC (p<.05). All the groups presented mean values above the 50:50% perceptibility (50:50%PT) and acceptability (50:50%AT) thresholds, except for control that showed mean value above 50:50%PT but below 50:50%AT. Biosilicate+EC showed higher relative microhardness than Saliva+EC (p<.05), but was similar to PHS+EC and PHS+Biosilicate+EC. Final enamel surface roughness increased for all the groups (p<.05), except for the control. The Biosilicate may prevent enamel mineral loss induced by erosion better than saliva. The PHS associated or not to Biosilicate demonstrated better color stability than saliva.

Resumo Este estudo avaliou o efeito da Fitoesfingosina (PHS) e da vitrocerâmica bioativa (Biosilicato) sobre o esmalte dental em termos de alteração de cor (ΔE), microdureza (KHN) e rugosidade superficial, quando submetido a desafio erosivo (DE). Sessenta espécimes de dentes bovinos (6×6×2mm) foram obtidos. Foram realizadas leituras de cor inicial (Easyshade, VITA), microdureza (HMV-2, Shimadzu) e rugosidade superfícial (SJ-201P, Mitutoyo). Os espécimes foram separados em grupos de acordo com os tratamentos: PHS, Biosilicato a 10%, PHS+Biosilicato a 10%, e saliva artificial (controle). Em seguida, foram submetidos a DE com Coca-Cola por 2 min. Esse ciclo foi repetido 4 vezes/dia por 15 dias. Entre os ciclos, as amostras foram mantidas em saliva artificial (2 h/37°C). Após os ciclos diários, os espécimes também foram armazenados em saliva artificial a 37ºC. Foram realizadas leituras finais de cor, microdureza e rugosidade superficial. Os dados de cor e microdureza foram analisados ​​por ANOVA de uma via, teste de Tukey; e dados de rugosidade superficial, por ANOVA de duas vias, teste de Tukey (p<.05). A maior ΔE ocorreu em Saliva+DE (p<.05). Grupos tratados com PHS apresentaram menor alteração de cor do que Saliva+DE (p<.05). Biosilicate+DE demonstrou valores intermediários, similar (p>.05) aos outros grupos, exceto Saliva+DE. Todos os grupos presentaram média acima dos limites 50:50% de perceptibilidade (50:50%LP) e aceitabilidade (50:50%LA) exceto o controle que demonstrou média acima do 50:50%LA mas abaixo do 50:50%LP. Biosilicate+DE mostrou maior microdureza realativa do que Saliva+DE (p<.05), mas similar a PHS+DE e PHS+Biosilicato+DE. A rugosidade de superfície do esmalte aumentou para todos os grupos, exceto para o controle que presentou a menor alteração (p<.05). O Biosilicato apode prevenir perda mineral do esmalte indizido pela erosão melhor que a saliva. O PHS associado ou não ao Biosilicato demonstrou melhor estabilidade de cor que a saliva.

Comparison of Fracture Resistance of Simulated Immature Teeth Using Four Different Commercially Available Apexification Materials ? An invitro Study

Introduction: The aim of this study was to compare the fracture resistance of simulated immature teeth using four different apical plug materials, i.e. Pro? Root MTA, Neo? MTA Plus, Biodentine, and Bioactive Glass. Materials and Methods: 80 extracted human maxillary anterior teeth were divided into 4 groups for this study. They were prepared using Peeso reamers to simulate immature teeth and to mimic Cvek’s stage 3 of root development. A 5 mm apical barrier was placed using different materials. The remaining canal was obturated using gutta?percha and AH plus sealer. The final samples were stored at 37°C and 100% humidity for 4 weeks. Fracture resistance of the teeth was measured in Newtons using a universal testing machine. The comparison of fracture resistance between the four groups was done using Kruskal Walis ANOVA followed by post hoc Mann Whitney U test for pairwise comparison. Results: Biodentine group showed the highest fracture resistance as compared to the other three groups and the difference was highly significant (P < 0.001). Conclusions: Biodentine can be advocated over MTA as an effective material for the management of teeth with wide open apex. Bioactive glass also has shown promising results in increasing the fracture resistance of simulated immature teeth.

Comparison of Fracture Resistance of Endodontically Treated Teeth Restored with Different Aesthetic Post and Core Systems Under All Ceramic Restoration Luted with Two Types of Cements

Context: Fracture of endodontically treated teeth is a grave sequela that a clinician should seriously ponder. Suitable selection of restorative materials is a requisite for long?term clinical success. Aims: To compare the fracture resistance of endodontically treated teeth restored with three different posts luted using two different cements under all ceramic crowns. Settings and Design: This in vitro study was conducted in the Department of Prosthodontics, Government Dental College, Kottayam, Kerala, India. Methods and Material: Thirty endodontically treated single?rooted mandibular premolars in which post spaces were prepared and divided into three different groups. Group 1 (n = 10): zirconia post group. Group 2 (n = 10): quartz fibre post group. Group 3 (n = 10): glass fibre post group. Each group is sub?divided into two based on the luting system: resin?modified glass ionomer cement (RMGIC) or dual?cure resin cement (DCRC). The fracture resistance testing was performed in a universal testing machine with a crosshead speed of 0.5 mm/min. Statistical Analysis Used: The mean fracture resistance were analysed using independent sample Student t?test and one?way ANOVA. Results: Within the zirconia post group, the mean fracture resistance was higher in DCRC sub?group compared to the RMGIC sub?group and the difference was statistically significant (p = 0.017). The difference in fracture resistance between three different post systems was not found to be statistically significant with respect to both the luting systems. Conclusions: It was observed that when zirconia post is used, the mean fracture resistance was higher in dual?cure resin group compared to the resin?modified GIC group.

Effect of aging and cementation systems on the bond strength to root dentin after fiber post cementation

Abstract This study evaluated the effect of aging and cementation of fiber posts using glass ionomer and resin cements on push-out bond strength, failure mode, and resin tag formation. One hundred and twenty bovine incisors were used. After post-space preparation, the specimens were randomly allocated into 12 groups (n = 10) according to the cementation system used: GC - GC Gold Label Luting & Lining); RL - RelyX Luting 2; MC - MaxCem Elite; RU - RelyX U200 and the aging periods (24 hours, 6 months, and 12 months). Slices from the cervical, middle, and apical thirds were obtained and analyzed by push-out bond strength test and confocal laser scanning microscopy. One-way ANOVA and Tukey's post-hoc test was used at a significance level of 5%. For the push-out bond strength test, no differences among GC, RU, and MC in the cervical and middle thirds were observed, regardless of the period of storage (P > 0.05). In the apical third, GC and RU showed similar bond strength but higher than other groups (P > 0.05). After 12 months, GC showed the highest bond strength (P < 0.05). Bond strength to post-space dentin decreased over time, regardless of the cementation system used. Cohesive failure was the most frequent, regardless of the period of storage, cementation system, and post-space third. Tag formation was similar among all groups. After 12 months, GC showed the highest bond strength values.

Resumo Avaliar o efeito do envelhecimento e sistemas de cimentação usando ionômero de vidro e cimentos resinosos na resistência de união à dentina após a cimentação do pino de fibra. Cento e vinte incisivos bovinos foram utilizados. Após o preparo do pós-espaço, os corpos de prova foram distribuídos aleatoriamente em 12 grupos (n = 10) de acordo com o período de envelhecimento (24 horas, 6 meses e 12 meses) e o sistema de cimentação utilizado: GC - cimento de ionômero de vidro (GC Gold Label Cimentação e Revestimento); RL - RelyX Luting 2; MC - MaxCem Elite; RU - RelyX U200. Cortes dos terços cervical, médio e apical foram obtidos e analisados por teste de resistência de união push-out e microscopia confocal de varredura a laser. ANOVA one-way e teste de Tukey foi usado a um nível de significância de 5%. Para o teste de resistência de união, não foram observadas diferenças entre GC, RU e MC nos terços cervical e médio, independentemente do período de armazenamento (P > 0,05). No terço apical, GC e RU apresentaram resistência de união semelhante, porém superior aos demais grupos (P > 0,05). Após 12 meses, o GC apresentou a maior resistência de união (P < 0,05). A resistência de união à dentina no espaço para pino diminuiu ao longo do tempo, independentemente do sistema de cimentação utilizado. A formação de tags foi semelhante entre todos os grupos. Após 12 meses, o GC apresentou os maiores valores de resistência de união.

Restoration of molars affected by molar-incisor hypomineralization using the occlusal replica technique / Restauração de molares afetados pela Hipomineralização Molar-Incisivo utilizando a técnica da réplica oclusal

ABSTRACT The aim of this study was to report the clinical case of an 8-year-old male patient seen at the Pediatric Dentistry outpatient clinic at the Universidade Federal do Paraná, Brazil, diagnosed with molar-incisor hypomineralization (MIH) after presenting with pain in teeth 16, 36, and 46, which had extensive atypical cavities and opacities on the adjacent enamel. A diagnostic wax-up of affected teeth was performed for manufacture of silicone occlusal matrix. Encapsulated high-viscosity glass ionomer cement was handled and inserted into the occlusal matrix which was fitted onto the teeth by slight finger pressure. After setting time, excess of material was removed, and occlusion was checked. A flowable resin coating material was applied, and the restorations were finished. Six months later, the restorations performed for treatment of the severe MIH lesions proved to be efficient, lowering the sensitivity reported by the patient, reshaping the teeth, improving their function, and refining dental esthetics.

RESUMO O objetivo deste estudo foi relatar um caso clínico de um paciente com diagnóstico de Hipomineralização de Molares e Incisivos (HMI). Paciente do sexo masculino, de 8 anos de idade, compareceu à clínica de Odontopediatria da Universidade Federal do Paraná com queixa de dor nos dentes 16, 36 e 46 - os quais apresentavam extensas cavitações atípicas com opacidades no esmalte adjacente. O enceramento diagnóstico dos dentes afetados foi realizado para a confecção das matrizes oclusais de silicone. Cimento ionômero de vidro de alta viscosidade encapsulado foi manipulado e inserido na matriz oclusal, a qual foi encaixada sobre os dentes, exercendo-se leve pressão digital. Após a presa do material os excessos foram removidos e a oclusão foi checada. Aplicou-se uma camada de resina fluída de cobertura e as restaurações foram finalizadas. Após seis meses, as restaurações realizadas para tratar as lesões severas de HMI mostraram-se eficazes, reduzindo a sensibilidade relatada pelo paciente, além de reestabelecerem a anatomia, função e estética dentária.

Influence of the cervical margin relocation on stress distribution - a finite element analysis on lower first molar restored by direct nano-ceramic composite

Aim: Evaluate the influence of the cervical margin relocation (CMR) on stress distribution in the lower first molar restored with direct nano-ceramic composite (zenit). Methods: A 3D model of the lower first molar was modeled and used. Standardized mesio-occluso-distal (MOD) preparation consisted in two models used in this study with mesial subgingival margin in model II. (CMR) was applied in model II using flowable composite or resin glass ionomer (Riva). Both models were restored with nanoceramic composite and then subjected to six runs (2 for the model I and 4 for model II) with load (100N) as two load cases, one at (11º) and other at (45º) from the vertical axis. The stress distributions (FEA) in the final restoration and (CMR) material were analyzed using 3D models. Results: The two models recorded an equivalent Von Mises stress and Total deformation in the final restoration, regardless of the difference in the oblique angle incidence from (11º to 45º) or the type of the material used for (CMR) there was no significant difference in the (FEA) between the model with CMR (model II) and the model without CMR (model I). Conclusions: (CMR) technique seems to be biomechanically beneficial with high eccentric applied stress, (CMR) with resin glass ionomer or flowable composite resin in combination with nanoceramic composite improved the biomechanical behavior of (MOD) cavities extended below cement enamel junction (CMR) with high modulus elasticity material like (Riva) exhibits a more uniform stress distribution

Investigation of the effect of indirect pulp capping materials on dentin mineral density

Aim: To evaluate the potential of inducing mineral density changes of indirect pulp capping materials applied to demineralized dentin. Methods: A total of 50 cavities were prepared, 5 in each tooth, in extracted ten molars without caries, impacted or semi-embedded. The cavities were scanned by microcomputed tomography (µ-CT) after creating artificial caries by microcosm method (pre-treatment). Each cavity was subjected to one of 5 different experimental conditions: control (dental wax), conventional glass ionomer cement (Fuji IX GP Extra), resin-modified calcium silicate (TheraCal LC), resin-modified calcium hydroxide (Ultra-Blend Plus), MTA (MM-MTA) and the samples were kept under intrapulpal pressure using simulated body fluid for 45 days. Then, the second µ-CT scan was performed (post-treatment), and the change in dentin mineral density was calculated. Afterward, elemental mapping was performed on the dentinal surfaces adjacent to the pulp capping agents of 5 randomly selected samples using energy dispersive X-ray spectroscopy (EDS) apparatus attached to a scanning electron microscope (SEM). The Ca/P ratio by weight was calculated. Friedman test and Wilcoxon Signed Ranks test were used to analyze the data. Results: There was a significant increase in mineral density values of demineralized dentin after treatment for all material groups (p<0.05). Resin-modified calcium silicate had similar efficacy to MTA and conventional glass ionomer cement, but was superior to resin-modified calcium hydroxide in increasing the mineral density values of demineralized dentin. Conclusions: Demineralized dentin tissue that is still repairable can be effectively preserved using materials with remineralization capability

Do irrigation solutions used during root canal instrumentation influence the adhesion of glass fiber posts? A systematic review / As soluções de irrigação usadas durante a instrumentação do canal radicular influenciam a adesão de pinos de fibra de vidro? Uma revisão sistemática

Statement of problem: the bond strength between adhesive cement and root dentin can be affected by irrigation protocols. Purpose: therefore, the objective of this systematic review was to answer the following question: Do irrigation solutions used during root canal instrumentation influence the adhesion of glass fiber posts to root dentin? Material and Methods: this study followed the recommendations of PRISMA 2020 for writing. PubMed, Scopus, Web of Science, and LILACS databases were searched for articles published until 26 January, 2022. Grey literature and a manual search were also performed. The inclusion criteria were based on the PICO strategy: permanent human or animal teeth (P), which were irrigated during root canal instrumentation with endodontic substances (I) and compared to irrigation with sodium hypochlorite at various concentrations (C) to analyze the bond strength of glass fiber posts (O). Two authors independently performed data extraction and the risk of bias. Results: eight articles were included. Four articles were classified as having a high risk of bias, where the others as medium risk. Studies have reported conflicting results regarding the influence of irrigating solutions and the different concentrations of sodium hypochlorite on the adhesion of glass fiber posts to root dentin. Conclusion: the heterogeneity between studies did not allow the conclusion of a true estimate regarding this topic, and further well-designed studies are needed to clarify this issue. Register: CRD42020221835. (AU)

Definição do problema: a resistência de união entre o cimento adesivo e a dentina radicular pode ser afetada pelos protocolos de irrigação. Objetivo: portanto, o objetivo desta revisão sistemática foi responder à seguinte questão: As soluções de irrigação usadas durante a instrumentação do canal radicular influenciam a adesão de pinos de fibra de vidro à dentina radicular? Material e Métodos: este estudo seguiu as recomendações do PRISMA 2020 para sua redação. As bases de dados PubMed, Scopus, Web of Science e LILACS foram pesquisadas para artigos publicados até 26 de janeiro de 2022. A literatura cinza e uma pesquisa manual também foram realizadas. Os critérios de inclusão foram baseados na estratégia PICO: dentes humanos ou animais permanentes (P), que foram irrigados durante a instrumentação do canal radicular com substâncias endodônticas (I) e comparados à irrigação com hipoclorito de sódio em várias concentrações (C) para analisar a resistência de união de pinos de fibra de vidro (O). Dois autores realizaram independentemente a extração de dados e o risco de viés. Resultados:oito artigos foram incluídos. Quatro artigos foram classificados como de alto riscode viés, enquanto os demais como de médio risco. Estudos relataram resultados conflitantes sobre a influência de soluções irrigadoras e as diferentes concentrações de hipoclorito de sódio na adesão de pinos de fibra de vidro à dentina radicular. Conclusão: a heterogeneidade entre os estudos não permitiu a conclusão de uma estimativa verdadeira sobre este tópico, sendo necessários mais estudos bem delineados para esclarecer esta questão. Registo: CRD42020221835 (AU)

Influência da adição de partículas de vidro bioativas em adesivos resinosos, na cimentação de bráquetes ortodônticos / Influence of the addition of bioactive glass particles in resin adhesives in the cementation of orthodontic brackets

O objetivo deste estudo foi desenvolver e avaliar um adesivo resinoso modificado com a incorporação de partículas de vidro bioativas (SCHOTT Bioactive Glass) em diferentes concentrações. Foram avaliados a resistência ao cisalhamento (RU), o índice de remanescente dentário (IRA), o grau de conversão (GC) e a liberação de cálcio. Foram utilizados 50 incisivos bovinos que foram fixados, através de suas raízes, em um molde de PVC, com resina acrílica autopolimerizável. As amostras foram alocadas em 5 grupos (n=10): TXT - Adesivo Transbond XT (3M Unitek, Monrovia, CA, EUA) sem adição de partículas de vidro bioativas, TXT20, TXT30, TXT50 ­ Adesivo Transbond XT acrescido respectivamente de 20%, 30% e 50% de partículas de vidro bioativas e SH - Adesivo resinoso FL BOND ll (SHOFU Inc.) com biomaterial SPRG. As amostras receberam uma profilaxia com pedra pomes e condicionamento com ácido fosfórico à 37%. Em seguida foi aplicada uma fina camada do sistema adesivo indicado na face vestibular dos incisivos bovinos, em todos os grupos e fotopolimerizado por 20 segundos, utilizando-se um fotopolimerizador RADII-Cal (SDI, Victoria, Austrália). Depois foi aplicada uma pequena quantidade de pasta resinosa fotopolimerizável Transbond XT (3M Unitek, Monrovia, CA, EUA) sobre a superfície dos bráquetes autoligados (MORELLI, Sorocaba, São Paulo, Brasil) e estes foram devidamente colados na face vestibular, no centro da coroa clínica do incisivo bovino e fotopolimerizado por 20 segundos, em cada face. Posteriormente as amostras foram submetidas ao teste de resistência ao cisalhamento. O índice de remanescente adesivo foi avaliado em estereomicroscópio DISCOVERY V20 (ZEISS). Os adesivos resinosos foram submetidos ao teste de grau de conversão e liberação de cálcio. Os dados foram inicialmente submetidos ao teste de normalidade e depois submetidos ao teste de ANOVA um fator, seguido do teste de Tukey para análise de comparações múltiplas, com nível de significância de 0,05. De acordo com os resultados obtidos na resistência de união ao cisalhamento (MPa±Dp) a maior média foi observada no grupo TXT 19,50±1,40A, seguida do grupo TXT20 18,22±1,04AB, seguida do grupo SH 17,62±1,45B, seguida do grupo TXT30 14,48±1,46C e a menor média TXT50 14,13±1,02C. No grau de conversão a maior média foi observada no grupo TXT20 73,02±3,33A que foi estatisticamente semelhante ao grupo SH 68,50±1,09A, seguida do grupo TXT 60,28±1,06B e TXT30 58,84±4,06B e a menor média foi do grupo TXT50 40,67±1,21C.Para a liberação de cálcio a maior média foi TXT50 2,23±0,11D, seguida por TXT30 0,74±0,00C, TXT20 0,55±0,00B, SH 0,47±0,04B e TXT 0,14±0,00A. Concluiu-se que a incorporação de partículas de vidro bioativas influenciou na resistência de união ao cisalhamento, no grau de conversão e na liberação de cálcio (AU).

The objective of this study was to develop and evaluate a resin adhesive modified with the incorporation of bioactive glass particles (SCHOTT Bioactive Glass) in different concentrations. Shear bond strength (SBS), adhesive remnant index (ARI), degree of conversion (DC) and calcium release were evaluated. Fifty bovine incisors were used, which were fixed through their roots in a PVC mold with self-curing acrylic resin. The samples were allocated into 5 groups (n=10): TXT ­ Transbond XT Adhesive (3M Unitek, Monrovia, CA, USA) without addition of bioactive glass particles, TXT20, TXT30, TXT50 ­ Transbond XT Adhesive rescpectively increased by 20%, 30% and 50% bioactive glass particles and SH ­ FL BOND ll resin adhesive (SHOFU Inc.) with SPRG biomaterial. The samples received prophylaxis with pumice stoe and conditioning with 37% phosphoric acid. Then, a thin layer of the indicated adhesive system was applied to the buccal surface of the bovine incisors, in all groups, and light cured for 20 seconds, using a RADII-Call curing light (SDI, Victoria, Australia). Then, a small amount of Transbond XT light-curing resinous paste (3M Unitek, Monrovia, CA, USA) was applied on the surface of the self-ligating brackets (MORELLI, Sorocaba, São Paulo, Brazil) and these were duly bonded on the buccal surface, in the center of the clinical crown of the bovine incisor and light cured for 20 seconds, on each side. Subsequently, the samples were submitted to the shear bond test. The adhesive remnant index was evaluated using a DISCOVERY V20 stereomicroscope (ZEISS). The resin adhesives were submitted to the degree of conversion and calcium release test. The data were initially submitted to the normality test and then submitted to the one-way ANOVA test, followed by the Tukey test for analysis of multiple comparisons, with a significance level of 0.05. According to the results obtained in the shear bond strength (MPa±Dp), the highest average was observed in the TXT group 19.50±1.40A, followed by the TXT20 group 18.22±1.04AB, followed by the SH group 17.62±1.45B, followed by the TXT30 group 14.48±1.46C and the lowest mean TXT5014.13±1.02C. In the degree of conversion, the highest average was observed in the TXT20 73.02±3.33A group, wich was statiscally like the SH group 68.50±1.09A, followed by the TXT 60.28±1.06B and TXT30 group 58.84±4.06B and the lowest mean was for the TXT50 group 40.67±1.21C. For calcium release, the highest mean was TXT50 2.23±0.11D, followed by TXT30 0.74±0.00C, TXT20 0.55±0.00B, SH 0.47±0.04B and TXT 0.14±0.00A. It was concluded that the incorporation of bioactive glass particles influenced in the shear bond strength, in the degree of conversion and in the release of calcium (AU).

S53p4 bioactive glass putty in the local treatment of cavitary chronic osteomyelitis / Biovidro ativo s53p4 em pasta no tratamento local da osteomielite crônica cavitária

ABSTRACT Objective: Evaluating the clinical results of bioactive glass S53P4 putty for the treatment of cavitary chronic osteomyelitis. Methods: Retrospective observational study, including patients of any age with clinical and radiological diagnosis of chronic osteomyelitis, who underwent surgical debridement and implantation of bioactive glass S53P4 putty (BonAlive® Putty, Turku, Finland). Patients who underwent any plastic surgery on the soft tissues of the affected site or had segmental bone lesions or septic arthritis were excluded. Statistical analysis was performed using Excel®. Demographic data, as well as data on the lesion, treatment, and follow-up, were collected. Outcomes were classified as "disease-free survival," "failure," or "indefinite." Results: This study included 31 patients, of which 71% were men and had with a mean age of 53.6 years (SD ± 24.2). In total, 84% were followed-up for at least 12 months and 67.7% had comorbidities. We prescribed combination antibiotic therapy for 64.5% of patients. In 47.1%, Staphylococcus aureus was isolated. Finally, we classified 90.3% of cases as "disease-free survival" and 9.7% as "indefinite." Conclusion: Bioactive glass S53P4 putty is safe and effective to treat cavitary chronic osteomyelitis, including infections by resistant pathogens, such as methicillin-resistant S. aureus. Level of Evidence IV, Case Series.

RESUMO Objetivo: Avaliar a atividade do vidro bioativo S53P4 em pasta no tratamento de osteomielite crônica. Métodos: Estudo observacional retrospectivo, com inclusão de indivíduos de qualquer idade com diagnóstico clínico e radiológico de osteomielite que realizaram tratamento cirúrgico com limpeza e desbridamento, seguido do preenchimento da cavidade com biovidro S53P4 em pasta (BonAlive ® Putty, Turku, Finland). Foram excluídos pacientes submetidos a procedimentos de cirurgia plástica nos tecidos moles do local afetado, com lesões ósseas segmentares e com presença de artrite séptica. A análise estatística foi realizada em Excel ® . Foram coletados dados demográficos, sobre a lesão, o tratamento e o acompanhamento. O desfecho foi classificado em "sobrevida livre de doença", "falha" ou "indeterminado". Resultados: Dos 31 pacientes analisados, 71% eram homens, com idade média de 53,6 anos (DP ± 24,26). Do total, 84% foram acompanhados por no mínimo 12 meses, e 67,7% apresentaram comorbidades. A terapia antibiótica combinada foi realizada em 64,5% dos pacientes, sendo o patógeno mais frequente o Staphylococcus aureus (47,1%). Ao final, 90,3% dos pacientes obtiveram "sobrevida livre de doenças" e 9,7% foram considerados "indeterminados". Conclusão: O vidro bioativo S53P4 em pasta é seguro e eficaz no tratamento da osteomielite cavitária e de infecções por patógenos resistentes, incluindo o S. aureus multirresistente. Nível de Evidência IV, Série de Casos.

Clinical diagnosis and treatment of multiple pulmonary nodules / 中华肿瘤杂志

CT screening has markedly reduced the lung cancer mortality in high-risk population and increased the detection of early-stage pulmonary neoplasms, including multiple pulmonary nodules, especially those with a ground-glass appearance on CT. Multiple primary lung cancer (MPLC) constitutes a specific subtype of lung cancer with indolent biological behaviors, which is predominantly early-stage adenocarcinoma. Although MPLC progresses slowly with rare lymphatic metastasis, existence of synchronous lesions and distributed location of these nodules still pose difficulty for the management of such patients. One single operation is usually insufficient to eradicate all neoplastic lesions, whereas repeated surgical procedures bring about another dilemma: whether clinical benefits of surgical treatment outweigh loss of pulmonary function following multiple operations. Therefore, despite the anxiety for treatment among MPLC patients, whether and how to treat the patient should be assessed meticulously. Currently there is a heated discussion upon the timing of clinical intervention, operation mode and the application of local therapy in MPLC. Based on clinical experience of our multiple disciplinary team, we have summarized and commented on the evaluation, surgical treatment, non-surgical local treatment, targeted therapy and immunotherapy of MPLC in this article to provide further insight into this field.