ABSTRACT
Objective: To investigate the effect of room and body temperatures on cyclic fatigue resistance of three endodontic nickel-titanium rotary files: Hyflex EDM (HEDM) (Coltene/Whaledent, Switzerland), WaveOne Gold (WOG) (Dentsply Maillefer, Switzer), and EdgeOne Fire (EOF) (EdgeEndo, Albuquerque, New Mexico, USA) in a double- curved canal. Material and Methods: In this study, Sixty NiTi rotary files were used. These files were divided into three groups (n = 20 for each group). Group A: HEDM (size 25, taper 0.08), group B: WOG (size 25, taper 0.07), and group C: EOF (size 25, taper 0.07). Each group was subdivided into two subgroups (n=10 for each subgroup). One of the subgroup was subjected to cyclic fatigue test at room temperature (20±1°C), while the other subgroup was subjected to cyclic fatigue test at body temperature (37±1°C). These files were tested by using a custom-made artificial canal with a double curvature (coronal curve: 60° curvature with 5 mm radius; apical curve: 70° curvature with 2 mm radius). All instruments were rotated according to the manufacturer instructions until the fracture occurred by using electric endodontic motor (Wave One, Dentsply Maillefer, Ballaigues, Switzerland). The number of cycles to fracture (NCF) and the fractured fragment length (FL) were recorded for each endodontic file. The data were gathered and statistically analyzed using shapiro-wilk test and two-way ANOVA test. The statistical significance was set at 0.05. Results: The NCF of WOG and EOF were significantly lower at body temperature as compared to room temperature (p ≤ 0.05), whereas no difference was observed in NCF of HEDM at body and room temperatures (p>0.05). At 20±1°C, the results showed a non-significant difference between NCF of WOG and EOF (p>0.05), while the NCF of HEDM was significantly lower than the other groups (p ≤ 0.05). At 37±1°C, the results showed a non-significant difference in NCF among the tested endodontic files (p ≤ 0.05). There is non-significant difference in FL of each group at (20±1°C) and (37±1°C) (p>0.05). No statistical difference in FL among the tested files at room and body temperatures (p>0.05). Conclusion: The temperature has a significant effect on cyclic fatigue resistance of EOF and WOG, whereas no effect was observed on cyclic fatigue resistance of HEDM. WOG and EOF had a comparable NCF, while HEDM had a lower NCF than other groups at room temperature. At body temperature, all tested files have a comparable NCF. These results were attributed to the type of the alloy and heat treated that was used to manufacture these endodontic files. The cyclic fatigue test should be done at body temperature (AU)
Objetivo : Investigar o efeito das temperaturas ambiente e corpórea na resistência a fadiga cíclica em três instrumentos endodônticos rotatório de níquel-titânio: Hyflex EDM (HEDM)(coltene/Whaledent, Switzerland), WaveOne Gold (WOG) Dentsply Maillefer, Switzer), e EdgeOne Fire (EOF) (EdgeEndo, Albuquerque, New Mexico, USA) em canais com dupla curvatura. Material e Métodos : Neste estudo foram utilizadas sessenta limas endodônticas rotatórias. Esses grupos foram divididos em três grupos (n=20). Grupo A: HEDM (tamanho 25, conicidade 0.08), grupo B: WOG (tamanho 25, conicidade 0.07), e grupo C: EOF (tamanho 25, conicidade 0.07). Cada grupo foi subdivididos em dois subgrupos (n=10). Um dos subgrupos foi submetido ao teste de fadiga cíclica em temperatura ambiente (20±1°C), enquanto o outro subgrupo foi submetido a ao teste de fadiga cíclica em temperatura corpórea (37±1°C). Essas limas foram testadas em um canal artificial feito sob medida com duas curvaturas (curva coronal: curvatura de 60º e com 5 mm de raio; curva apical: curvatura de 70º com 2mm de raio); Todos os instrumentos foram rotacionados de acordo com a instrução do fabricante até que a fratura ocorresse utilizando um motor endodôntico elétrico (Wave One, Dentsply Maillefer, Ballaigues, Switzerland). O número de ciclos até a fratura (NCF) e a comprimento do fragmento fraturado (FL) foram registrados para cada lima endodôntica. Os dados foram coletados e analisados pelo teste shopiro-wilk e ANOVA two-way. A significância estatística foi 0.05. Resultados: O NCF do WOG e do WOF foi significantemente menor na temperatura corpórea em comparação à temperatura ambiente (p ≤ 0.05), enquanto não foi observada diferença entre NCF em HEDM em temperatura corpórea e temperatura ambiente (p>0.05). Em 20±1°C, os resultados mostraram diferença não significativa entre o NFC com WOG e EOF (p>0.05), enquanto o NCF com HEDM foi significante menor que os demais grupos (p ≤ 0.05). A 37±1°C, os resultados mostraram diferença não significativa em NCF entre as limas endodônticas testadas (p ≤ 0.05). Há diferença não significativa no FL de cada grupo (20±1°C) e (37±1°C) (p>0.05). Não houve diferença estatisticamente diferente no FL entre as limas testadas nas temperaturas ambiente e corporal (p>0,05). Conclusão: A temperatura tem efeito significativo na resistência a fadiga cíclica do EOF e WOG, enquanto não foi observado nenhum efeito na resistência a fadiga cíclica do HEDM. WOG e EOF tiveram um NCF comparável, enquanto HEDM teve um NCF menor do que os outros grupos em temperatura ambiente. À temperatura corporal, todas as limas testas apresentam semelhante NCF. Esses resultados foram atribuídos ao tipo de liga e ao tratamento térmico que foi utilizado na fabricação. O teste de fadiga cíclica deve ser feito à temperatura corporal (AU)
Subject(s)
Body Temperature , Analysis of Variance , Dental Instruments , FatigueABSTRACT
Background: Root canal preparations done using many rotary endodontic instruments results in formation of root dentin defects because of the stress induced by the instruments within the root canal during cleaning and shaping, thereby worsening the long term prognosis of the root canal treated teeth. Many rotary instruments are been globally studied for the purpose of generating a correct instrument for root canal preparation. Objective: This study was done to evaluate the effect of HyFlex EDM, which is a new rotary system on root dentin during root canal preparation. Materials and methods: Fourteen single rooted premolars were selected and divided into two groups, Group 1-Protaper Universal and Group 2-HyFlex EDM. All the specimens were decoronated. Roots of each specimen were sectioned at 3mm, 6mm and 9mm and were then viewed under stereomicroscope for dentinal defects. t-test was done for the statistical analysis and level of significance was set at p=0.05. Results: Protaper Universal showed highest percentage of defect than HyFlex EDM. Conclusion: HyFlex EDM showed lowest percentage of defects in root dentin. Thus, HyFlex EDM is more efficient in root canal preparation than that of Protaper Universal thereby preventing dentinal defects or microcracks leading to root fractures.
ABSTRACT
OBJECTIVES: It was aimed to compare the cyclic fatigue resistances of ProGlider (PG), One G (OG), and HyFlex EDM (HEDM) nickel titanium glide path files in single- and double-curved artificial canals. MATERIALS AND METHODS: 40 PG (16/0.02), 40 OG (14/0.03), and 40 HEDM (10/0.05) single-file glide path files were used in the present study. Sixty files were subjected to cyclic fatigue test by using double-curved canals and 60 files by using single-curved canal (n = 20). The number of cycles to fracture (NCF) was calculated and the length of the fractured fragment (FL) was determined by a digital micro-caliper. Twelve pieces of fractured files were examined with scanning electron microscope to determine fracture types of the files (n = 2). The NCF and the FL data were analyzed using one-way analysis of variance and post hoc Tukey test using SPSS 21 software (p < 0.05). RESULTS: In all of the groups, NCF values were significantly lower in double-curved canals when compared to single-curved canals (p < 0.05). For both of single- and double-curved canals, NCF values of HEDM group in apical and coronal curvatures were found to be significantly higher than NCF values of PG and OG groups (p < 0.05). In both of single- and double-curved canals, NCF value of PG group was found significantly higher than OG group (p < 0.05). CONCLUSIONS: Within the limitations of this study, HEDM glide path files were found to have the highest cyclic fatigue resistance in both of single- and double-curved canals.