ABSTRACT
Objective:To observe the disinfection efficiency of N-doped nano-TiO2 on the curing light-guide rods.Methods:50 light-guide rods from 6 dental clinics were included,the bacteria adhesion on the light-guide rods before and after disinfection with N-doped nano-TiO2 was investigated using ATP bioluminescence method.Results:The RLU value of light-guide rods exposed to the air was 51 -649 before the use of N-doped nano-TiO2 disinfection,after spraying N-doped nano-TiO2 ,the RLU value of light-guide rods was 0 -6(P <0.01 ).Conclusion:N-doped nano-TiO2 has significant sterilization effect on the curing light-guide rods.
ABSTRACT
Background: The degree of conversion of dental adhesive is an important parameter since poor mechanical properties are related to low percentage of monomer-to-polymer conversion within resin-based materials. Objectives: To evaluate the influence of polymerization time and light guide distance on the degree of conversion (DC) of three contemporary dental adhesives. Materials and Methods: The spectral data of ExciTE DSC, Single Bond ® , and Adper ® Prompt L-Pop were analyzed using FTIR spectroscopy after 20 s, 40 s, and 60 s of photoactivation times. Light tip distances were kept at 1, 3, and 6 mm during the exposures. Statistics: Data were analyzed using ANOVA and Tukey's test (α = 0.05). Results: Within groups, greater DC values were found using a tip distance of 1 mm or a 60-s curing time for Single Bond ® (59%) and Adper ® Prompt L-Pop (65%). No statistically significant difference (P > 0.05) was found using either 1 mm or 3 mm tip distances after 20 s, 40 s, and 60 s of light curing time for Single Bond ® . ExciTE ® DSC showed the greatest DC values with light tip distances of 1 mm (90%) and 3 mm (89%), using 60 s of light curing. Conclusion : The self-etch adhesive Adper ® Prompt L-Pop could be applied in shallow cavity preparations and must be light cured for at least 40 s. The light-cured total-etch adhesive ExciTE ® DSC could be applied in every restorative scenario if the curing time is extended up to 60 s or if the tip distance is extended up to 3 mm.
ABSTRACT
When curing the composite restorations with light curing units, the light guides are often in direct contact with oral tissues, therefore contamination of light guides is inevitable. Curing light guides fall into the "semicritical" instrument category according to the Centers for Disease Control and Prevention (CDC) and must be heat or vapor-sterilized or at a minimum, these semicritical instruments must be sterilized in a liquid chemical agent. Currently, most common methods of maintaining sterility of the light guides are wiping the guide with a disinfectant, such as glutaraldehyde, after each patient use; using autoclavable guides; using presterilized, single-use plastic guides; and using translucent disposable barriers to cover the guide.