ABSTRACT
Objective:To explore the effect of mixed reality (MR) application in the reconstruction of mandibular defects.Methods:Eighteen patients with mandibular defects were enrolled in this study, including 10 male patients and 8 female patients, whose age ranged from 27 to 45 years, and the mean age was 35.4 years. All the patients were from the Stomatological Hospital of the Fourth Military Medical University, during October 2019 to May 2021. Fibular flaps were used for the reconstruction of the mandibular defects. The patients were randomly divided into three groups, six in each group. In group one, MR-guided mandibular defect repair and reconstruction technique was used. In group two, 3D printed guide-assisted mandibular defect repair and reconstruction technique was used, and in the control group, traditional jaw defect repair and reconstruction technique was used. All the procedures were performed by the same team. Cone beam computed tomography (CBCT) was used for analysis of surgical accuracy, and questionnaires were used to evaluate the outcome of medical communication, occlusal relationship, appearance restoration, and medical experience satisfaction.Results:The mean surgical errors in the group one and group two were (1.75±0.44) mm and (1.81±0.16) mm respectively, which were both significantly lower than that in the control group (3.05±0.83) mm ( tMR=3.38, t3D=3.56, P<0.01). The medical communication (4.60±0.35, 4.52±0.28, tMR=2.90, t3D=2.77, P<0.05), occlusal relationship (4.17±0.32, 4.28±0.39, tMR=3.07, t3D=3.29, P<0.05), and medical experience satisfaction scores (4.26±0.45, 4.25±0.67, tMR=2.50, t3D=2.26, P<0.05) in the experimental groups were significantly higher than those in the control group (4.02±0.34, 3.58±0.33, 3.56±0.32, respectively). There was no significant difference in the satisfaction of appearance recovery among all the groups ( P>0.05). Conclusions:MR-guided mandibular repair and reconstruction surgery has high accuracy and is also beneficial to the recovery of occlusal relationship and medical communication.
ABSTRACT
Free vascularised fibular flap has many advantages in repair of mandibular defects, and it has become the main method in the mandibular reconstruction. However, the traditional free fibular flap used to repair the mandibular defect is lack of individualised design and precise surgical guidance, and it is difficult to achieve accurate repair and the effect of reconstruction. The concept of personalised and accurate functional reconstruction and the clinically application of digital medical technology provides a new approach to solve the problems. The application of digital medical technology in the repair of mandibular defects with fibular flap is one of the hotspots of current research. This article introduces the application characteristics of digital medical technology, such as 3-dimensional reconstruction technology, virtual surgery planning (VSP) technology and 3D printing technology, in the repair of mandibular defects with fibular flap transfer.
ABSTRACT
Objective@#The purpose of this study was to explore the application value of digital surgery in the reconstruction of mandibular composite defects with a chimeric deep circumflex iliac artery perforator flap (DCIAPF).@*Methods@# Six patients with complex defects within half of the mandible underwent reconstruction using DCIAPF from January 2019 to January 2020 in Shenzhen People’s Hospital. Doppler was used to locate the deep iliac circumflex artery, the range of mandibular osteotomy was designed, and DCIAPF was used to repair the mandibular composite under the guidance of the guide plate during the operation. Twelve months postoperatively, the facial shape, jaw height, and occlusal relationship were evaluated@*Results@#DCIAPF was harvested successfully in 6 patients, and the heights of all alveolar ridges and occlusal function of patients were significantly restored, without pain or snapping in the temporomandibular joint area.@*Conclusion @#The blood supply of DCIAPF is rich, and soft-bone tissue is sufficient for the reconstruction of mandibular composite defects. Combined with digital surgery, the accuracy and safety are improved.
ABSTRACT
@#Mandibular defects in adolescents are mostly caused by surgical resection of benign and malignant tumors, trauma and jaw inflammation. The reconstruction of mandibular defects in adolescents is challenging. In addition to solving the problem of jaw reconstruction in adults, some clinical factors, including the influence of surgery on the growth of donor and recipient areas, the long-term effects of reconstruction, and the outcome of bone grafts, must also be considered. At present, the main reconstructive methods include autogenous bone grafts and distraction osteogenesis. Autogenous bone grafts are still the gold standard due to their long-term effects. Favorable growth potential after repair was shown in adolescent cases of mandibular reconstruction with fibula flap. Normal occlusion was restored, and a long-term stable effect was achieved in cases of condylar reconstruction with costal cartilage. The safety and clinical effects of distraction osteogenesis have been confirmed, but the long-term effects of large-scale mandibular defects are still uncertain. In addition, other tissue engineering techniques also have good application prospects for the repair and reconstruction of adolescent mandible defects, but more in-depth basic research and more extensive clinical trials should be performed to verify the efficacy.
ABSTRACT
BACKGROUND: Segmental defect of mandible is often caused by tumor, trauma and other reasons. Simultaneous mandibular defect by vascularized fibular flap is the most important repair method at present. It is not only useful for the reconstruction with titanium plates, but also useful for small titanium plates for fixation. Clinical retrospective studies have shown that there is no significant difference in postoperative complication rate between patients with the two fixation methods, but relevant biomechanics studies are still lacking at present. OBJECTIVE: The three-dimensional finite element analysis was used to analyze the stress distribution and stability on mandibular segmental defects simulated fibular flaps grafted with reconstruction plates and miniplates fixation. METHODS: A healthy adult male with complete dentition was selected for CT scan and data were input into the computer to reconstruct the mandible and dentition model. Three types of 3D models were built for mandibular defects dependent on Jewer’s classification, including models H (loss of lateral mandible, mandibular angle, ascending branch of mandible, and condyles), L (loss of unilateral mandible) and C (loss of bilateral mandible chin). Mechanical distribution features and stability of fixation with reconstruction plates and miniplates were comparatively studied after fibular repair of mandibular segmental defects. RESULTS AND CONCLUSION: (1) The stress graphs showed that stress was mostly higher in surrounding areas of normal mandibles such as condyle, condylar neck, mandibular angle, molar and titanium screws. In particular, the stress was highest near mandibular angles. (2) For type-H defect, the great stress was generated near the mandibular angles when mandible was reconstructed with reconstruction plate, and the stress value was 185 MPa. The stress values approximately ranged from 117 to 135 MPa on type-H and type-L defects with miniplates. The maximum stress of fibula block was less than 30.4 MPa, and the maximum stress of titanium nail was 56.2 MPa. (3) The relative displacements approximately varied between 15 µm and 18 µm on the fracture sides after repair with type-H and type-L defects with miniplates and reconstruction plates. Almost no relative displacement was generated on the fracture sides after type-C mandibular defects. (4) Both titanium reconstruction plates and titanium miniplates could meet biomechanical requirements for fibular repair of H, C, and L defects.
ABSTRACT
Objective@#To explore the application value of digital 3D printing technology for repairing mandibular defects with fibular flaps and to provide a basis for accurate repair mandibular defects.@*Methods@#Nine cases of mandibular defects were selected, and spiral CT and CTA of the lower limbs were performed before the operation. The osteotomy guide plate and plastic guide plate were created using computer software, and the titanium plate was rebuilt according to the printed mandibular model. During the operation, an osteotomy guide plate was used for mandibular resection; a fibula bone plastic guide plate was used to reconstruct the fibular flap and reconstruct the mandibular defects.@*Results@#The entire fibula flap survived, and the occlusal relationship was good. There was no complications in the donor site. The patients were satisfied with the appearance of the repair. All patients were followed up for 3 to 6 months, at which point the bone was basically healed.@*Conclusion@#Using a digital 3D printing technique to repair mandible defects with a fibular flap can shorten the operation time, reduce the risks of operation, and better restore the maxillofacial shape and the function of the jaw, which is consistent with the concept of appropriate medical treatment. Additionally, this process provides a better method for the treatment of mandibular defects.
ABSTRACT
Objective: To design osteotomy templates for the construction of mandibular defect by using fibular flap in a reverse engineering technique approach. Methods: Five patients with mandibular defect were enrolled and their treatments were designed in a three-dimensional (3D) virtual planning software package. The 3D printing model with shaped reconstruction plate and titanium-screws were under CT scanning and the image was reconstructed and registered back to the original mandible and fibula in a surface-best-fit method. Then the osteotomy template with screw holes of shaped reconstruction plate was designed and fabricated. The reconstruction of mandible with multiple fibular segments was guided by the osteotomy template. Results: All the five patients were discharged successfully with satisfied outcome. The deviation between virtual plan and actual results were calculated: max deviation (3.53±2.33) mm and the angle deviation 3.31˚±1.48˚. Conclusion: The accuracy of the osteotomy template is satisfied and can be applied to the clinical use.
ABSTRACT
To evaluate the clinical effect of digital assisted chimeric deep circumflex iliac artery perforator flap (DCIAPF) in the reconstruction of mandibular composite defects. Methods From January, 2018 to January, 2019, 6 cases of mandibular tumor patients with postoperative defect within side were treated. Preoperative CTA was used to evaluate the deep branches of spin iliac artery.Digital simulation software and 3D printing technolo-gy was taken, vascularized iliac flap of the design guide of bone was made, and the rebuilding effect was simulated. DCIAPF was used to repair the defect of lower jawbone. The donor sites were sutured directly. The patients were fol-lowed-up in outpatient department for 3-6 months to evaluate the recovery of the patient′s shape, jaw height and oc-clusal function, as well as the complications in the donor area. Results Postoperation pathological examination re-sults: ameloblastoma in 2 cases, 4 cases of gingival cancer. The length of cut out ilium was 6.0-13.0 cm, carrying the flap area of 3.0 cm×1.0 cm-6.0 cm×5.0 cm.Six cases of DCIAPF and iliac bone flap survived.The shape, mandibular height and occlusal function were satisfactory.And no obvious complications were found in the donor area. Conclu-sion The blood supply of DCIAPF is rich with enough bone mass and height. The position of terminal skin perfora-tors is invariant. The complications of donor sites is less. With the help of digital technology, the accuracy of mandibular defect repair and the 3-dimensional wound repair can be realized, and provides an advantage condition for subsequent dental implant.It is one of the ideal method of reconstruction of mandibular defect.
ABSTRACT
Objective To evaluate the clinical application and effect of computerized digital sur -gical assisted design and manufacture for reconstruction of mandibular defect with vascularied iliac crest flap graft .Methods CT was used to scan the craniofacial and maxillofacial region of mandibular ameloblastoma patient ,and then the 3D model of the maxillofacial skeleton was reconstructed using the computerized digital surgical aid design to simulate the focal resection and the mandibular defect reconstruction with the iliac crest flap .Surgical guides were prepared by 3D printing to assist focal re-section and bone reshaping .Postoperatively ,clinical and CT examinations were performed to observe the restoration of the patient's facial appearance and occlusal relationship ,as well as wound healing and graft survival .Results Postoperative review results showed that the bone graft survived well ,and the anastomosed bone was formed .The wound in the surgery area healed .No recurrence of the tumor was found after clinical and CT examination .The maxillofacial appearance was well restored ,and the re-sidual occlusal relationship recovered well .Conclusions The use of computerized digital surgical aided design combined with 3D printing technology can effectively simplify the mandibular segmental defect repair and reconstruction and optimize the postoperative repair effect .
ABSTRACT
OBJECTIVES: This study sought to compare efficiency results between the use of a customized implant (CI) and a reconstruction plate (RP) in mandibular defect reconstruction in an animal model. MATERIALS AND METHODS: Fifteen rabbits underwent surgery to create a defect in the right side of the mandible and were randomly divided into two groups. For reconstruction of the mandibular defect, the RP group (n=5) received five-hole mini-plates without bone grafting and the CI group (n=10) received fabricated CIs based on the cone-beam computed tomography (CBCT) data taken preoperatively. The CI group was further divided into two subgroups depending on the time of CBCT performance preoperatively, as follows: a six-week CI (6WCI) group (n=5) and a one-week CI (1WCI) group (n=5). Daily food intake amount (DFIA) was measured to assess the recovery rate. Radiographic images were acquired to evaluate screw quantity. CBCT and histological examination were performed in the CI subgroup after sacrifice. RESULTS: The 1WCI group showed the highest value in peak average recovery rate and the fastest average recovery rate. In terms of reaching a 50% recovery rate, the 1WCI group required the least number of days as compared with the other groups (2.6±1.3 days), while the RP group required the least number of days to reach an 80% recovery rate (7.8±2.2 days). The 1WCI group showed the highest percentage of intact screws (94.3%). New bone formation was observed in the CI group during histological examination. CONCLUSION: Rabbits with mandibular defects treated with CI showed higher and faster recovery rates and more favorable screw status as compared with those treated with a five-hole mini-plate without bone graft.
Subject(s)
Rabbits , Bone Transplantation , Cone-Beam Computed Tomography , Eating , Mandible , Mandibular Reconstruction , Models, Animal , Osteogenesis , Printing, Three-Dimensional , TransplantsABSTRACT
Objective@#To evaluate the quality of life (QOL) of patients who underwent resection of mandible and reconstruction by fibula flap.@*Methods@#A total of seventy six patients who underwent resection of mandible and reconstruction by fibula flap admitted to The First Affiliated Hospital of Zhengzhou University from January 2013 to August 2016 were prospectively analyzed. In the preoperative and postoperative 3 month, 12 months, the QOL of these patients were assessed by using the 14-item oral health impact profile questionnaires (OHIP), The University of Washington quality of life (UW-QOL) and the European organization for research and treatment of cancer quality of life questionnaire head and neck module (EORTC-QLQ-H&N).@*Results@#The OHIP-14 questionnaire showed the highest score of the three months after surgery was mental discomfort (73.0±11.9) and psychological disorder (72.1±11.9), and it was difficult to be relieved over time. In the 12 months after surgery, the lowest scores were physiological pain (35.0±8.6) and disability (37.5±10.2), and 87% (66/76) patients thought that the flap repair worked well. The UW-QOL questionnaire showed that the scores of the patients' chewing, taste and salivary were significantly reduced by 3 months after the operation, and they were still unable to recover to preoperative level 12 months after surgery. The EORTC-QLQ-H&N35 questionnaire showed that swallowing, language, and diet scored higher in the three months after surgery, but could be restored to preoperative levels 12 months after surgery. The score was higher in 12 months after the operation than before surgery and was related to radiotherapy in some patients.@*Conclusions@#Using fibula flap to repair the mandible defect can restore the patient's jaw function and improve the quality of life of the patients.
ABSTRACT
@#The mandible is the most important bony support in the lower 1/3 skeleton of the face which is critical for both esthetics and function. Mandibular defects, resulting from tumor resection, can cause severe functional and cosmetic deformities. Nowadays, vascularized bony tissue transfer such as free fibula flap has been widely used for mandibular reconstruction. However, traditional mandibular reconstruction based on clinical experience may hawe some problems in accuracy and efficiency because of lacking individualized design. In recent years, digital surgical techniques such as computer-aided design, rapid prototyping and surgical navigation have been used for mandibular reconstruction surgery. Accurate design for tumor resection as well as individualized design for mandibular reconstruction can be performed with computer preoperatively which help to turn the virtual plan into reality by using surgical guide or navigation. Many studies suggested that digital surgical techniques could significantly improve the clinical outcome of mandibular reconstruction. In this article, we summarized the application of digital surgical techniques for mandibular reconstruction based on our own experience and literatures review.
ABSTRACT
Objective To discuss the clinical effect of Da Vinci robot-assisted free fibula flap for the management of mandibular and mouth segmental defect.Methods There was a patient with malignant neoplasm of lower gum,which underwent robot-assisted free fibula flap for the management of mandibular and mouth segmental defect,was analyzed.The surgery was divided into two groups:a group resected the primary tumors,another group cut fibula free flap.Use of Da Vinci robotic surgical system for vascular anastomosis and suture of the oral mucosa.Results Four weeks after surgery,the free fibula flap survived completely.There was no infection in the mouth.The patient can walk freely and eating semifluid.Conclusion The Da Vinci robotic surgical system is a stable,minimally invasive,clear and safe method for microsurgery.
ABSTRACT
Objective:To prepare the velvet antler polypeptide-collagen/chitosan composite materials,and to investigate its promotive effect on cicatrization of mandibular defect and possible mechanism.Methods:The collagen and chitosan solution were mixed.The composite material was prepared by glutaraldehyde crosslinking method.The microstructure of the composite material was observed by transmission electron microscope (SEM).The unilateral mandibular defect models of 36 rabbits were established.The rabbits were divided into experiment and control groups,and each group was divided into 4-,8-and 12-week subgroups,and there were 6 rabbits in each sub group.The rabbits in experiment group were implanted with velvet antler polypeptide-collagen /chitosan composite materials and the rabbits in control group were treated.4,8 and 12 weeks after operation,the histology of bone defect and peripheral nerve reconstruction of the rabbit models were detected by CT;the expression of vascular endothelial growth factor (VEGF) in bone tissue of the rabbits was detected by immunohistochemistry;the ultrastructure of bone defect was observed by SEM.Results:The structure of composite materials had layered folds and the inner diameter of the stent became larger and mainly dominated by sheet structure,which was the ideal structure of biological materials.4 weeks after operation,the new bone was formatted in experiment group,most of the new bone like-tissue materials were degraded,and the VEGF expression showed an increasing trend;8 weeks after operation,the trabecular bone in the bone defect of the rabbits in experiment group was increased obviously and the expression of VEGF was decreased.12 weeks after operation,the new bone formation and the density in experiment group was consistent with the normal tissue,and the expression level of VEGF returned to normal.At each the point after operation,the degree of bone defect healing and bone formation rate in experiment group were obviously prior to control group.Conclusion:Velvet antler polypeptide-collagen /chitosan composite material has the promotive effect on the fracture healing of mandibular defect of the rabbits and its possible mechanism may be related to promoting the expression of VEGF.
ABSTRACT
Objective Sperparamagnetic material is widely used in tumor localization and treatment , but there are still few studies in bone tissue engineering .This study aims to investigate the osteogenic efficiency of superparamagnetic scaffolds poly lactic acid hydroxy acetic acid (PLGA)/iron-doped hydroxyapatite (Fe-HA) for repairing rabbit mandibular defects , as well as evaluating the biocompatibility of the material . Methods 36 New Zealand rabbits were randomly selected and randomly divided into 6 groups, control without and with static magnetic field ( SMF ) groups ( no material is implanted), PLGA scaffold without and with SMF groups (implanted PLGA), PLGA/Fe-HA scaffold without and with SMF groups ( im-planted PLGA/Fe-HA), each group has 6 rabbits.We created bilat-eral mandibular defect models , executed the rabbits at 4 weeks and 12 weeks post-surgery, marked the mandibular specimens which detected by general observation, Micro-CT and HE staining, and ana-lyzed the results of bone mineral density in defect area .The hematological detection , pathological examination of liver and kidney sam-ples were carried out at 12 weeks pot-surgery.. Results The PLGA/Fe-HA scaffold without and with SMF groups began to appear rough defect area edge , decreased defect diameter , new bone formation from 4 weeks; the defect area formed a smooth , continuous bone repair from 12 weeks.The PLGA scaffold without and with SMF groups appeared rough , irregular callus repair , visible boundary between defect edge and normal bone tissue .There are still have part of unrepaired bone defect in the center of defect area in the control without and with SMF groups.At 12 weeks , the bone mineral density of PLGA/Fe-HA scaffold with SMF group [(572.50±19.09) mgHA/cm3] , respectively, compared with the PLGA scaffold with SMF group [(467.00±6.24)mgHA/cm3], the control with SMF scaffold group [(480.00±2.08) mgHA/cm3], the PLGA/Fe-HA scaffold without SMF group [(461.00±19.79)mgHA/cm3], the PL-GA scaffold without SMF group [(446.00±11.31)mgHA/cm3] and the control without SMF group [(422.00±28.28) mgHA/cm3], all the differences were statistically significant ( P<0.05).The bone mineral density of PLGA/Fe-HA scaffold with SMF group at 4 weeks [(572.50±19.09)mgHA/cm3] was significantly higher than that at 12 weeks [(276.00±28.28)mgHA/cm3] (P<0.05), the differences between 4 weeks and 12 weeks in other groups were statistically significant (P<0.05). Conclusion The superparama-gentic PLGA/Fe-HA scaffolds can promote the repair of bone defect , optimize the osteogenic effect of the material with SMF .Also ,the scaffold showed a good biocompatibility .
ABSTRACT
BACKGROUND: The objectives of the present study were to investigate the reliability and outcomes of computer-assisted techniques in mandibular reconstruction with a fibula flap and verify whether the surgical navigation system was feasible in mandible reconstructive surgery. METHODS: Eight cases were enrolled in the computer assisted surgery (CAS) group and 14 cases in the traditional group. The shaping and fixation of the fibula grafts were guided by computer assisted techniques, which could be monitored with the BrainLAB surgical navigation system. The variation of mandible configuration was evaluated by CT measurement in the Mimics software, including the variation of length, width, height and gonial angle of the mandible. The 3D facial soft tissue alteration was also analyzed in 3D chromatogram by Geomagic software. RESULTS: All 22 fibula flaps survived. The mandibular configurations and facial contours had a better clinic result in the CAS group. The length, width, height and gonial angle of the reconstructive mandible were more similar to the original one. The Wilcoxon rank sum test analysis suggested significant differences in the measurements. The chromatographic analysis also visually showed superiority over the traditional group. CONCLUSIONS: The computer assisted surgical navigation method used in mandibular reconstruction is feasible and precise for clinical application. The contour of the reconstructed mandible and facial symmetry are improved with computer techniques.
Subject(s)
Fibula , Mandible , Mandibular Reconstruction , Methods , Surgery, Computer-Assisted , TransplantsABSTRACT
Objective To investigate the influence of Herba Epimedium, a kidney-strengthening Chinese herb, on the regenerate ossification of nano-hydroxyapatite/collagen/ polylactic acid (nHAC/PLA) in the repair of rabbit mandibular defect. Methods Sixteen rabbit models with 10 mm × 8 mm subperiosteal mandibular defect were established. The rabbits were randomly divided into 2 groups, namely Herba Epimedium group and control group. In both groups, the left mandibular defect region (short for left side) was not filled with any material, while the right mandibular defect region ( short for right side) was filled with nHAC/PLA. On week 2, 4, 8, 12 after modeling, rabbits in each group were killed, and then the macro-view, imageology and histology of the bilateral mandibles were observed. The data of the regenerate bone areas were calculated and analyzed with analysis of variance (ANOVA) . Results The imageological results showed bone mineral density in the right side of Herba Epimedium group and the control group, and in the left side of Herba Epimedium group were higher than those in the left side of the control group on week 2, 4, 8, 12 after modeling. The histological results showed that the regenerate ossification in the right side of Herba Epimedium group and the control group was superior to that in the left side of the corresponding groups, with more regenerative bone and vessels. In the right side of Herba Epimedium group and the control group, amount of bone-like tissues were grown into nHAC/PLA, and the maturity degree of bone tissue was increased with the prolongation of time. And the changes were more obvious in the right side of Herba Epimedium group, showing as the remaining of nHAC/PLA having been surrounded and replaced by regenerative bone tissue. Regenerative bone area was increased in both sides of Herba Epimedium group, which differed from the same side of the control group (P<0.05) . The differences of the regenerative bone area were also significant between the left side and right side of the same group (P<0.05) . Conclusion Herba Epimedium can effectively accelerate the repair of mandibular defect, and nHAC/PLA is of good biocompatibility, osteoinduction and bone conduction, and can be expected for bone defect repairing in clinic.
ABSTRACT
Objective To summarize the perioperational nursing strategies for patients undergoing mandibular defect repair by forearm flap composite fibula flap.Methods From January 2009 to December 2012,9 patients with mandibular defect and soft tissue defects after resection of malignant tumors received fibula flap and forearm flap.Before operation,the patient received psychological education and the preparation of donor flap and receptor area together with oral preparation was performed.After operation,the vital signs and blood circulation in the flap were observed.Results The fibula and forearm flaps in 8 patients survived.The fibula flap in one patient survived while the forearm flap developed with vascular crisis.The success rate for the transplanted flap was 89.9%. Conclusion The perioperative nursing strategies are key to increase survival rate of flaps and the success rate of operation.
ABSTRACT
Objective:To investigate the effects of Nano-chitosan rhBMP-2 Gel(NCS/BMP-2 Gel)on the repair of mandibular de-fect.Methods:NCS/BMP-2 Gel and NCS Gel were prepared and respectively injected into the subcutaneous space on both sides of dorsum of 9 rats.3 rats were respectively sacrificed 10,20 and 30 d after injection.The subcutaneous nodules were histologicaly ex-amined.Mandibular defect was made in 54 SD rats and the rats were divided randomly and into 3 groups(n=18):NCS/BMP-2 Gel was implanted into the defects in group 1,NCS Gel in group 2,no injection in group 3.Animals were sacrificed 3,6 and 9 weeks after transplantation.X-ray examination,pathologic observation were conducted.Results:Subcutaneous nodules were found in both sides of the rat dorsum.The residual mandibular defect area in study group 1 was apparently smaller than that in group 2 and 3(P<0.05). More new bone formation was observed in the gel injected area in group 1 than in group 2 and 3.Conclusion:Nano-CS/BMP-2 Gel is biocompatible and can accelerate the healing of mandibular defect.
ABSTRACT
Objective To investigate the application of vascularized free fibula flaps in reconstruction of mandibular defect,and to evaluate the survival rate and repair effect of the method.Methods 16 patients with mandibular tumor,having a desire to reconstruct mandible,and their systemic state could tolerate the long time operation, were selected to reconstruct mandibular defect by vascularized fibula flaps,of which 12 were male,4 female,aged 24-66 years old,average 45.2 years old.The resection of primary tumor and free fibula flaps were simultaneously conducted,then the fibular flaps were shaped according to the defect location and size of the mandible,and were fixed with reconstructive titanium plate for repair and reconstruction of mandible. The survival of flaps was determined by skin color, texture, and skin temperature of the flaps. The reconstruction effects were evaluated through the patients’surface like photos and X-ray picture of mandible before and after operation.Results All of flaps were survived and no serious complications were found. The complications of the supplied sites were skin tension and wound dehiscence, which were healed by dressing. The mandibular reconstruction effects were good through 2 or more persons’double blind evaluation.Conclusion Free fibula flaps have high survival rate and good results in mandibular reconstruction,and they can meet the needs of various types of mandibular defect repair.