Establishment of national reference standard of tazobactam impurity A / 中国药科大学学报

@#To improve the standard of quality control of tazobactam and its preparations in China, national reference standard of tazobactam impurity A was developed. After tazobactam impurity A was synthesized, its structure was validated by infrared (IR), mass spectrometry (MS) and nuclear magnetic resonance (NMR), and its content uniformity and short-term stability were measured and investigated. Then, water content and residue on ignition of impurity A were determined, and its purity was determined using high performance liquid chromatography (HPLC) with 10 mmol/L ammonium acetate solution-acetonitrile (98∶2) as the mobile phase. Mass balance method was used to determine the content of the first batch of tazobactam impurity A national standard substance. Meanwhile, nuclear magnetic quantitative method was used to calculate the content, which was mutually verified with the mass balance method. The developed reference material of tazobactam impurity A is consistent with the maximum degradation impurity in tazobactam system applicability solution and the reference material of tazobactam related substance A contained in USP41. Within the 95% confidence range, the ratio of inter- and intra-bottle variance of impurity A after separation was 0.61 (< F0.05(11,12)), proving that the uniformity was satisfying. The contents of organic impurity, water content and inorganic impurity in impurity A were 0.90%, 1.24% and 0.25%, respectively. The content of impurity A was determined to be 97.6% by mass balance method, which was basically consistent with the result of nuclear magnetic quantitative method (97.1%). Under the condition of 25 °C, the area normalized purity of impurity A was 99.1% at 0, 3, 5 and 10 days, proving that the sample was stable at room temperature for 10 days. Finally the first batch of national standard substance of tazobactam impurity A was established successfully.

Establishment of National Reference Standards of Sulfadimidine Impurities / 中国药学杂志

OBJECTIVE: To establish the national reference standards of sulfadimidine impurities thus to provide guarantee for improving the standard of quality control of sulfadiazine in China. METHODS: First, the structures of sulfadimidine impurities A and E were validated by infrared spectrocopy, mass spectrum and nuclear magnetic resonance method. Then, the purities of impurities A and E were determined using the method of related substance test for sulphadiazine in the European Pharmacopoeia (version 9.0),their water content and residue on ignition were determined as well. The contents of sulfadimidine impurities A and E were determined by using mass balance method. Meanwhile, external standard method and nuclear magnetic quantitative method were used to calculate the content, which were mutually verified with the mass balance method. Finally, the correction factors of sulfadiazine impurities A and E at 241 nm were determined using standard curve method. RESULTS: The structures of sulfadimidine impurities A and E were confirmed, and the contents of impurities A and E were 99.1% and 98.7%, respectively, which were calculated by mass balance method. The results were consistent with those obtained from external standard method and nuclear magnetic quantification method. The correction factors of impurities A and E to sulfadimidine were 0.97 and 0.63, respectively. CONCLUSION: The first batch of national standard substances of sulfadimidine impurities A and E were established successfully.