Root anatomy and canal configuration of maxillary premolars: a cone-beam computed tomography study / Anatomía de la raíz y configuración del conducto de los premolares maxilares: estudio de tomografía computarizada de haz cónico

SUMMARY: The aim of the study was to determine the number and anatomical configuration of roots and root canals of maxillary first and second premolars using cone-beam computed tomography scans. n273 CBCT scans were evaluated, obtaining a sample of 592 maxillary premolars. Root number and root canal anatomy were categorized using Ahmed´s classification. Data was analyzed using Pearson's Chi-squared test. Two roots were present on 157 first premolars, one root in 132 premolars and three roots in 17. Second premolars presented one root in 266 samples and two roots in 20; no second premolars presented three roots. Eight different configurations were found; the most frequent was 2MP B1 P1 in first premolars (51,3 %) and 1MP1 (63.6 %) in second premolars. The most frequent morphology found in maxillary premolars in Chilean population was two and three roots. The analysis of internal anatomy using CBCT revealed a highly variable distribution of root canals, generally of low to medium complexity, similar to what is found in other ethnic groups.

RESUMEN: El objetivo de este estudio fue determinar el número y la configuración de raíces y canales radiculares de primeros y segundos premolares maxilares utilizado tomografía computacional de haz cónico. 273 TCHC fueron evaluados, obtenido una muestra de 592 premolares maxilares. El número de raíces y la anatomía de los canales radiculares fueron categorizados utilizando la clasificación de Ahmed. Los datos fueron analizados con la prueba Chi- Cuadrado de Pearson. Dos raíces fueron observadas en 157 primeros presentaron una raíz en 266 muestras y dos raíces en 20; no se encontraron tres raíces en segundos premolares. Ocho diferentes configuraciones fueron encontradas; siendo la más frecuente 2MP B1 P1 en primeros premolares (51,3 %) y 1MP1 (63,6 %) en segundos premolares. La morfología radicular más frecuentemente encontrada en premolares de población Chilena fue de dos y tres raíces. El análisis de la anatomía interna usando TCHC mostró una gran variabilidad de en la distribución de los canales radiculares. Generalmente de mediana y baja complejidad como los encontrados en otros grupos etnicos.

Influence of base materials on stress distribution in endodontically treated maxillary premolars restored with endocrowns / 北京大学学报(医学版)

OBJECTIVE@#To evaluate the influence of base materials on stress distribution in endodontically treated maxillary premolars restored with endocrowns using three-dimensional finite element analysis.@*METHODS@#A maxillary second premolar was scanned by Micro-CT and a three-dimensional finite element model of ceramic endocrown with 1 mm thickness of base was established. A model without base was also established as a negative control. Four kinds of conventional base materials with different elastic modulus were adopted: light cure glass ionomer(3M Vitrebond, 3 657 MPa), flowable composite resin(3M Filtek Z350XT Flowable Restorative, 7 300 MPa), high strength glass ionomer(GC Fuji Ⅸ, 13 130 MPa), and posterior composite resin(3M Filtek P60, 19 700 MPa). With a 200 N force loaded vertically and obliquely, the distribution and magnitude of stress in the tooth tissue and adhesive layer were investigated by three-dimensional finite element analysis.@*RESULTS@#The maximum von Mises stress values(vertical/oblique) in dentin and adhesive layer were measured as follows: (1) no base material: 19.39/70.49 MPa in dentin and 6.97/17.97 MPa in adhesive layer; (2) light cure glass ionomer: 19.00/69.75 MPa in dentin and 6.87/16.30 MPa in adhesive layer; (3) flowable composite resin: 18.78/69.33 MPa in dentin and 6.79/16.17 MPa in adhesive layer; (4) high strength glass ionomer: 18.71/69.20 MPa in dentin and 6.74/16.07 MPa in adhesive layer; (5) posterior composite resin: 18.61/69.03 MPa in dentin and 6.70/16.01 MPa in adhesive layer. Under the same loading condition, models with different elastic moduli of base materials had similar stress distribution patterns. The von Mises stress of tooth tissue was mainly concentrated in the tooth cervix. Under oblique load, the regions where von Mises stress concentrated in were similar to those under a vertical load, but the values increased. The stress concentration in the tooth cervix was alleviated in models with base materials compared with the model without base material. The maximum von Mises stress in the tooth tissue and adhesive layer decreased when the elastic modulus of base materials increased and got close to that of dentin.@*CONCLUSION@#The posterior composite resin of which the elastic moduli is high and close to that of dentin is recommended as base material for premolar endocrowns to alleviate the concentration of stress in tooth cervix and adhesive layer.

Surgical extrusion of a maxillary premolar after orthodontic extrusion: a retrospective study

OBJECTIVES: Crown-root fracture and cervical caries in maxillary premolars constitute a challenge in cases of subgingival placement of restoration margins. Surgical extrusion has been practiced successfully in permanent anterior teeth. The aim of the present retrospective study was to assess the clinical outcome of surgical extrusion after orthodontic extrusion in maxillary premolars. MATERIALS AND METHODS: Twenty-one single, tapered root maxillary premolars with subgingival crown-root fracture or caries were included. Presurgical orthodontic extrusion was performed on all teeth to prevent root resorption. Extent of extrusion and rotation was determined based on crown/root ratio. The postoperative splinting period was 7 to 14 days. Clinical and radiographic examination was performed at an interval of 1, 2, and 3 months. RESULTS: After the mean follow-up of 41.9±15.2 months, failure was observed as increased mobility in 3 of 21 cases. No significant difference was observed in the outcome of surgical extrusion based on tooth type, age, sex, 180° rotation, or time for extraction. Furthermore, marginal bone loss was not observed. CONCLUSION: Surgical extrusion of maxillary premolars can be a possible therapeutic option in cases of subgingival crown-root fracture.

Morphological Study and Analysis of Microhardness and Permeability of the Furcation of Maxillary Premolars

Abstract The morphology, microhardness and dentin permeability of the furcation region of maxillary premolars were evaluated. Ten premolars were cut lengthwise and the furcation region was delimited. In one group (n=10) microhardness was measured in the buccal, central and palatal regions, in the outer middle and inner layers of the furcation, and in the buccal and palatal regions adjacent to the furcation. Knoop hardness was tested with 10 g load for 15 s. Data were analyzed statistically by ANOVA and Tukey-Kramer test (a=0.05). In the other group (n=10) confocal microscopy was used to study dentin morphology. Other 10 specimens were instrumented with ProTaper and immersed in 10% copper sulfate for analysis of permeability under light microscopy. About microhardness, there was no significant difference (p>0.05) among the buccal (39.9±3.1), central (39.5±4.4) and palatal (39.7±5.0) regions of the furcation, or between these regions and the adjacent buccal (39.1±5.8) and palatal (39.7±5.8) regions (p>0.05). The inner layer (42.3±3.7) had significantly higher microhardness (p<0.05) than the outer layer (37.1±3.9). There was a tendency of calcification of the dentinal tubules from the outer towards the inner layer. The percentage of stained area was 12.45±2.0%, restricted to the outer layer. The buccal, central and palatal regions of the furcation as well as the buccal and palatal adjacent regions had similar microhardness values. In conclusion, the inner dentin layer is harder than the outer dentin layer. The dentinal tubules are sinuous and intertwine towards the middle layer. Dye penetration is restricted to the outer layer.

Resumo Estudou-se a morfologia, microdureza e permeabilidade dentinária da furca de pré-molares superiores. Dez pré-molares tiveram a porção oclusal da coroa e os terços radiculares médio e apical removidos. Cortou-se longitudinalmente o remanescente e delimitou-se a furca. As hemi-secções foram distribuídas em dois grupos. Num (n=10), mediu-se a microdureza nas regiões vestibular, central e palatina, nas camadas externa, média e interna e nas porções vestibular e palatina adjacentes à furca. Utilizou-se dureza Knoop, carga de 10 g por 15 s. Os dados foram analisados pelo teste ANOVA e Tukey-Kramer (a=0.05). No outro grupo (n=10) utilizou-se microscopia confocal para estudo da morfologia da dentina. Outros 10 espécimes foram instrumentados com Protaper e NaOCl a 1% e imersos em sulfato de cobre a 10% para análise da permeabilidade. Após preparo histológico os espécimes foram analisados em fotomicroscópio. Não houve diferença significante (p>0,05) entre a microdureza das regiões vestibular (39,9±3,1), central (39,5±4,4) e palatina (39,7±5,0), nem entre essas regiões e as adjacentes vestibular (39,1±5,8) e palatina (39,7±5,8) (p>0,05). A camada interna (42,3±3,7) é mais dura que a externa (37,1±3,9) (p<0,05). Há uma tendência dos canalículos calcificarem no sentido da camada externa para a interna. A porcentagem de área corada foi de 12,45±2.0 e restrita à camada externa. As regiões vestibular, central e palatina da furca, bem como as adjacentes vestibular e palatina apresentaram microdureza semelhante entre si. A camada interna apresentou-se mais dura que a externa. Os canalículos dentinários eram sinuosos e se entrelaçaram em direção à camada média. A penetração de corantes se restringiu à camada externa.

Endodontic retreatment - unusual anatomy of a maxillary second and mandibular first premolar: Report of two cases.

An accurate diagnosis of the morphology of the root canal system is a prerequisite for successful root canal treatment. A major cause of endodontic treatment failure in missed (or) untreated root canals is that they still harbor infection. Careful radiographic interpretation and examination of pulp chamber floors are helpful in locating root canal entrances. These case reports present anatomical variations in upper and lower premolars.

Microscope-aided endodontic treatment of maxillary first premolars with three roots: A case series.

Maxillary premolars have a highly variable root canal morphology. However, the presence of three roots is a rare occurrence. This clinical article describes the unusual anatomy detected in maxillary premolars during routine endodontic treatment using microscope. The diagnosis and clinical management of maxillary first premolars with three roots and canals using radiographic interpretation, access cavity modification and visual enhancement with operative microscopes is discussed in the article.

Stress distribution of endodontically treated maxillary second premolars restored with different methods: Three-dimensional finite element analysis / 대한치과보존학회지

The purpose of this study was to evaluate the influence of elastic modulus of restorative materials and the number of interfaces of post and core systems on the stress distribution of three differently restored endodontically treated maxillary second premolars using 3D FE analysis. Model 1, 2 was restored with a stainless steel or glass fiber post and direct composite resin. A PFG or a sintered alumina crown was considered. Model 3 was restored by EndoCrown. An oblique 500 N was applied on the buccal (Load A) and palatal (Load B) cusp. The von Mises stresses in the coronal and root structure of each model were analyzed using ANSYS. The elastic modulus of the definitive restorations rather than the type of post and core system was the primary factor that influenced the stress distribution of endodontically treated maxillary premolars. The stress concentration at the coronal structure could be lowered through the use of definitive restoration of high elastic modulus. The stress concentration at the root structure could be lowered through the use of definitive restoration of low elastic modulus.

Effect of maxillary premolar extraction on transverse arch dimension in Class III surgical-orthodontic treatment / 대한치과교정학회지

Collective changes caused by orthodontic tooth movement evaluated in a specific treatment modality could give suggestive information on the specific treatment strategy. The aim of this study was to investigate retrospectively the characteristics of the orthodontic tooth movement during surgical-orthodontic treatment in order to provide an effective presurgical orthodontic treatment planning for the maxillary premolar extraction modality in the skeletal Class III malocclusion patient. Pre- and posttreatment dental casts of skeletal Class III malocclusion patients with nonextraction (N=24) and the maxillary premolar extraction (N=31) were collected. The angulation and inclination measuring gauge (Invisitech Co. Seoul, Korea) was used to evaluate the orthodontic tooth movement. The changes in the maxillary and mandibular dental arch widths were also measured from the canines to the second molars. As a result, more palatal inclination change in the maxillary dentition was found with the premolar extraction modality than with the nonextraction modality. Linear regression analysis showed that the inter-arch width coordination was mainly due to the inclination changes of maxillary posterior teeth. We conclude that the indications and proper treatment planning for surgical-orthodontic treatment in skeletal Class III malocclusion with maxillary premolar extraction could depend partly on the magnitude of the transverse inter-arch coordination especially in the maxillary dentition.