Microguidewire Looping to Traverse Stented Parent Arteries of Intracranial Aneurysms

OBJECTIVE: Stents are widely used in coil embolization of intracranial aneurysms, but on occasion, a microcatheter must traverse a stented segment of artery (so-called trans-cell technique) to select an aneurysm, or double stenting may necessary. In such situations, microguidewire passage and microcatheter delivery through a tortuous stented parent artery may pose a technical challenge. Described herein is a microguidewire looping technique to facilitate endovascular navigation in these circumstances. METHODS: To apply this technique, the microguidewire tip is looped before entering the stented parent artery and then advanced distally past the stented segment, with the loop intact. Rounding of the tip prevents interference from stent struts during passage. A microcatheter is subsequently passed into the stented artery for positioning near the neck of aneurysm, with microguidewire assistance. The aneurysm is then selected, steering the microcatheter tip (via inner microguidewire) into the dome. RESULTS: This technique proved successful during coil embolization of nine saccular intracranial aneurysms (internal carotid artery [ICA], 6; middle cerebral artery, 2; basilar tip, 1), performing eight trans-cell deliveries and one additional stenting. Selective endovascular embolization was enabled in all patients, resulting in excellent clinical and radiologic outcomes, with no morbidity or mortality directly attributable to microguidewire looping. CONCLUSION: Microguidewire looping is a reasonable alternative if passage through a stented artery is not feasible by traditional means, especially at paraclinoid ICA sites.

Easy Advancement of a Large-Profile Microcatheter (Excelsior XT27(TM)) by Parallel Use of Two Microguidewires For Stent Delivery / 신경중재치료의학

PURPOSE: In the endovascular treatment of cerebral aneurysms, navigating a large-bore microcatheter for delivery of an open-cell stent can be challenging, especially in wide-necked bifurcation aneurysms. We were able to overcome this difficulty by parallel use of two microguidewires through the stent-delivery microcatheter. MATERIALS AND METHODS: From December 2014 to April 2015, we treated 15 patients with wide-necked bifurcation aneurysms. For stent delivery, we used a 300-cm 0.014-in microguidewire (Transend), which was placed into the target branch using an exchange technique. A 0.027-in microcatheter (Excelsior XT-27), which was designed for the stent, was advanced over the exchange microguidewire. If we had trouble in advancing the microcatheter over the exchange microguidewire, we inserted a regular microguidewire (Traxcess), into the microcatheter lumen in a parallel fashion. We also analyzed the mechanism underlying microcatheter positioning failure and the success rate of the 'parallel-wire technique'. RESULTS: Among the 15 cases, we faced with navigation difficulty in five patients. In those five cases, we could advance the microcatheter successfully by applying the parallel-wire technique. There were no procedure-related complications. CONCLUSION: Simply by using another microguidewire together with pre-existing microguidewire in a parallel fashion, the stent-delivery microcatheter can be easily navigated into the target location in case of any advancement difficulty.

Microguidewire looping technique for superselective catheterization of the acute angled artery / 介入放射学杂志

Objective To assess the clinical value of microguidewire looping technique in superselective catheterization of the acute angled artery. Methods Manipulating the microguide wire into a U shaped loop and simultaneus withdrawal of the microguidewire and microcatheter was performed when the tip of the microguidewire simultaneous got into the target artery and following by slowly and simultaneously withdrawing the microguidewire and microcatheter until the tip of the microguidewire entering into the target artery for a certain length and finally pushed the microcatheter into the target artery slowly. Results Eighteen out of 21 patients with acute angled target artery were successfully catheterized through this approach with technical success rate of 86%, without any complications. Conclusions Microguidewire looping technique is a feasible method for superselective catheterization of the acute angled artery when the routine approach failed.