ABSTRACT
OBJECTIVE@#To compare the effects of resin base and different retention depth on the fracture resistance of mandibular molars restored with nano-ceramic endocrowns.@*METHODS@#Forty mandibular molars selected and randomly divided into 5 groups: ① The control group which was consisted of intact teeth, ② the non-resin base group, ③ the 2 mm retention depth group, ④ the 3 mm retention depth group, ⑤ the 4 mm retention depth group, respectively. After tooth preparation, in vitro root canal therapy was conducted, which was followed by endocrown design, production and adhesive of groups ②-⑤. All the samples were under load (N) of the universal mechanical testing machine after embedding. The fracture pattern of each sample was observed under stereomicroscope. Then the microstructure of the fracture surface was observed by scanning electron microscopy.@*RESULTS@#The fracture loads of each group were respectively: the control group fracture load was (3 069.34±939.50) N; experimental groups: fracture load of (2 438.04±774.40) N for the group without resin base; fracture load of (3 537.18±763.65) N for the group with 2 mm retention depth. The fracture load of the retention depth 3 mm group was (2 331.55±766.39) N; the fracture load of the retention depth 4 mm group was (2 786.98±709.24) N. There was statistical significance in the effect of resin base and different retention depth on the fracture loads of molars restored with nano-ceramic endocrown (P < 0.05). Repairable fractures in each group were as follows: control group 2/8, non-resin base group 1/8, retention depth of 2 mm group 1/8, retention depth of 3 mm group 2/8, and retention depth of 4 mm group 0/8. The effects of the retention depth and the presence of resin base on the fracture resistance of the resin nano-ceramic endocrowns were statistically significant (P < 0.05). Scanning electron microscopy showed more arrest lines and small twist hackles on the fracture surface of the restorations with resin base (retention depths of 2 mm, 3 mm, and 4 mm), with cracks extending towards the root. In addition to the characteristics above, more transverse cracks parallel to the occlusal surface, pointing outwards from the center of the pulp cavity retention, were also observed on the fracture surface of the non-resin base restorations.@*CONCLUSION@#When molar teeth with nano-ceramic endocrowns are restored, resin base and the retention depth of 2 mm help the teeth to obtain optimal fracture strength.
Subject(s)
Ceramics , Composite Resins , Dental Porcelain , Dental Restoration Failure , Dental Stress Analysis , Materials Testing , MolarABSTRACT
Objective: The aim of the study was to evaluate the effect of extension of endocrown in pulp space and the effect of ferrule on the fracture resistance of anterior endocrowns made of nano-ceramic resin blocks. Material and Methods: Twenty-eight freshly extracted human upper central incisor teeth were prepared to receive CAD/CAM nanoceramic resin endocrowns with four different designs. The specimens were divided into two groups (n = 14) according to the extension of the endocrown inside root canal (A:short and B:long), then each group was further subdivided into another two subgroups (n = 7) according to the presence or absence of ferrule effect (1:ferrule and 2: no ferrule). Endocrowns were then fabricated using CEREC in lab and nanoceramic resin blocks (DENTSPLY Sirona, Germany) and LAVA ultimate (3M ESPE, Germany) blocks size 14L. Results: Two-way ANOVA showed that the ferrule (p > 0.0001) had statistically significant effect on the fracture resistance. However, the extension of the endocrown into the canal had no statistical significant effect on the fracture resistance (p = 0.837). The interactions between the independent variables (extension into the canal and ferrule) had statistically significant effect on the fracture resistance (p = 0.029). Load to fracture for group 1A was 439.53 N, 1B was 306.46 N, 2A was 516.29 N and 2B was 242.04 N. Conclusions: Fracture resistance was not improved by the long or short extensions of the endocrowns in the pulp space, however, the ferrule effect shows significant improvement of the fracture resistance of the nanoceramic resin endocrowns. (AU)
Objetivo: O objetivo deste estudo foi avaliar o efeito da extensão da coroa endocrown na câmara pulpar e o efeito férula na resistência à fratura de coroas endocrowns anteriores confeccionadas através de blocos de resina nanocerâmica. Material e Métodos: Vinte e oito dentes incisivos centrais superiores humanos recém-extraídos foram preparados para receber endocrowns de resina nanocerâmica CAD / CAM com quatro diferentes tipos de preparos. Os espécimes foram divididos em dois grupos (n = 14) de acordo com a extensão da endocrown dentro do canal radicular (A: curto e B: longo), então cada grupo foi subdividido em outros dois subgrupos (n = 7) de acordo com presença ou ausência do efeito férula (1: com férula e 2: sem férula). As endocrowns foram usinadas através do CEREC In Lab e blocos de resina nanocerâmica (DENTSPLY Sirona, Alemanha) e blocos de LAVA ultimate (3M ESPE, Alemanha) tamanho 14L. Resultados: ANOVA dois fatores demostrou que a férula (P> 0,0001) teve efeito estatisticamente significativo na resistência à fratura. No entanto, a extensão do endocrown no canal não teve efeito estatisticamente significativo na resistência à fratura (P = 0,837). As interações entre as variáveis independentes (extensão no canal e férula) tiveram efeito estatisticamente significativo na resistência à fratura (P = 0,029). A carga para fratura do grupo 1A foi de 439,53 N, 1B foi de 306,46 N, 2A foi de 516,29 N e 2B foi de 242,04 N. Conclusões: A resistência à fratura não foi melhorada pelas extensões longas ou curtas das endocrowns na câmara pulpar, no entanto, o efeito férula mostrou uma melhora significativa na resistência à fratura das coroas endocrowns de resina nanocerâmica (AU)
Subject(s)
Humans , Resin Cements , Dental Pulp Cavity , Flexural StrengthABSTRACT
Objective: The objective of this study was to evaluate the effect of immediate dentin sealing, bonding technique, and restorative material on the dentin bond strength of an indirect composite (Solidex) and a resin nanoceramic CAD/CAM block (LAVA Ultimate). Material and Methods: A total of 120 periodontally extracted human molar teeth were abraded horizontally and divided into two groups according to dentin sealing procedures (delayed dentin sealing [DDS] and immediate dentin sealing [IDS]). Next, all teeth were attached to a simulated pulpal pressure mechanism. The specimens were removed from the mechanism after a week. Teeth were subdivided into three groups based on the bonding technique and the type of cement used (Acid-etching + Single Bond Universal + RelyX Ultimate, Single Bond Universal + RelyX Ultimate, RelyX Unicem). Each subgroup was further divided into 2 subgroups according to the type of restorative material used (Solidex [n = 10], Lava Ultimate CAD/ CAM restorative material [n = 10]). Sixty cylindrical samples prepared using both the restorative materials were bonded to the tooth surface according to their group's bonding procedures. All specimens were embedded in chemically cured acrylic resin for shear bond strength test. The shear bond strength (SBS) of the specimens was determined by a universal testing machine with a headspeed of 0.5 mm/min. Results: Three-way ANOVA, independent-sample t test and post hoc Tukey comparison tests (α=0.05) were performed on all data. There were significant differences between the groups. It was found that IDS process significantly increased bond strength in all groups. When dentin bond strengths of tested luting cements were compared, the highest bond strength values were recorded in groups in which the specimens were luted with RelyX Ultimate cement using etch-and-rinse technique. The lowest bond strength values were obtained from groups that used RelyX Unicem as the luting cement. Conclusion: IDS improves bond strength of indirect restorations. Moreover, bonding techniques may have critical effects on the dentin bond strength of indirect restorative materials. The cements' specific affinity levels to both restorative materials and dentin could be considered as the reason of the situation.(AU)
Objetivo: O objetivo deste estudo foi avaliar o efeito do selamento imediato da dentina, da técnica adesiva e do material restaurador na resistência de união à dentina de um compósito indireto (Solidex) e um bloco CAD / CAM de resina nanocerâmica (LAVA Ultimate). Material e Métodos: Um total de 120 dentes molares humanos extraídos por razões periodontais foram desgastados horizontalmente e divididos em dois grupos de acordo com os procedimentos de selamento dentinário (vedação tardia da dentina [DDS] e vedação imediata da dentina [IDS]). Em seguida, todos os dentes foram conectados a um equipamento de pressão pulpar simulada. As amostras foram removidas do equipamento após uma semana. Os dentes foram subdivididos em três grupos, com base na técnica de união e no tipo de cimento utilizado (ataque ácido + Single Bond Universal + RelyX Ultimate, Single Bond Universal + RelyX Ultimate, RelyX Unicem). Cada subgrupo foi então dividido em 2 subgrupos de acordo com o tipo de material restaurador utilizado (Solidex [n = 10], material restaurador Lava Ultimate CAD / CAM [n = 10]). Sessenta amostras cilíndricas preparadas com os dois materiais restauradores foram coladas na superfície do dente de acordo com os procedimentos de adesão do grupo. Todas as amostras foram embebidas em resina acrílica quimicamente ativada para o teste de resistência ao cisalhamento. A resistência de união ao cisalhamento (SBS) das amostras foi determinada por uma máquina de teste universal com uma velocidade de 0,5 mm / min. Resultados: ANOVA de três fatores, teste t de amostra independente e testes de comparação post hoc de Tukey (α = 0,05) foram realizados em todos os dados. Houve diferenças significativas entre os grupos. Verificou-se que o processo IDS aumentou significativamente a força de união em todos os grupos. Quando as forças de união da dentina dos cimentos testados foram comparadas, os valores mais altos de força de união foram registrados nos grupos em que as amostras foram cimentadas com cimento RelyX Ultimate usando a técnica "condicione e lave". Os menores valores de resistência de união foram obtidos de grupos que usaram como cimento o RelyX Unicem. Conclusão: O IDS melhora a força de união das restaurações indiretas. Além disso, as técnicas de união podem ter efeitos críticos na resistência da união à dentina de materiais restauradores indiretos. Os níveis de afinidade específicos dos cimentos para materiais restauradores e dentina podem ser considerados o motivo da situação.(AU)
Subject(s)
Cementation , Computer-Aided Design , Resin Cements , Shear StrengthABSTRACT
@#Aesthetic or cosmetic dentistry is one of the main areas of dental practice. Increasing demands of patients for aesthetics has resulted in the development of several techniques for restoring the anterior teeth. Composite resin restorations have become an integral part of contemporary restorative dentistry and can be called “star of minimal invasion” due to its conservative concepts. The direct composite veneering allows restoring the tooth in a natural way and preservation of sound tooth structure when compared to indirect restorations. Before placement of direct composite veneers, a proper diagnosis, available treatment options, cost of treatment, patient’s expectations and duration of treatment should be taken into consideration. This article presents three case reports of aesthetic rehabilitation of anterior teeth using direct composite with satisfactory outcome that mimic the natural dentition.
ABSTRACT
PURPOSE: To assess the degree of conversion (DC) and light irradiance delivered to light-cured and dual-cured cements by application of different light sources through various types of monolithic computer-aided design and computer-aided manufacturing (CAD/CAM) materials. MATERIALS AND METHODS: RelyX Ultimate Clicker light-cured and dual-cured resin cement specimens with 1.5-mm thicknesses (n=300, 10/group), were placed under four types of crystalline core structure (Vita Enamic, Vita Suprinity, GC Ceresmart, Degudent Prettau Anterior). The specimens were irradiated for 40 seconds with an LED Soft-Start or pulse-delay unit or 20 seconds with a QTH unit. DC ratios were determined by using Fourier transform infrared spectroscopy (FTIR) after curing the specimen at 1 day and 1 month. The data were analyzed using the Mann-Whitney U test (for paired comparison) and the Kruskal-Wallis H test (for multiple comparison), with a significance level of P < .05. RESULTS: DC values were the highest for RelyX Ultimate Clicker light-cure specimens polymerized with the LED Soft-Start unit. The combination of the Vita Suprinity disc and RelyX Ultimate Clicker dual-cure resin cement yielded significantly higher values at both timepoints with all light units (all, P < .05). CONCLUSION: Within the limitations of this study, we conclude that the DC of RelyX Ultimate Clicker dual-cure resin cement was improved significantly by the use of Vita Suprinity and the LED Soft-Start light unit. We strongly recommend the combined use of an LED light unit and dual-cure luting cement for monolithic ceramic restorations.
Subject(s)
Ceramics , Computer-Aided Design , Crystallins , Polymers , Resin Cements , Spectroscopy, Fourier Transform InfraredABSTRACT
PURPOSE: To explore the influence of different surface conditionings on surface changes and the influence of surface treatments and aging on the bond strengths of composites to non-aged and aged resin nanoceramics. MATERIALS AND METHODS: Rectangular-shaped non-aged and aged (5000 thermocycles) resin nanoceramic specimens (Lava Ultimate) (n=63, each) were divided into 3 groups according to surface treatments (untreated, air abrasion, or silica coating) (n=21). The surface roughness was measured and scanning electron microscopy was used to examine one specimen from each group. Afterwards, the specimens were repaired with a composite resin (Filtek Z550) and half were sent for aging (5000 thermocycles, n=10, each). Shear bond strengths and failure types were evaluated. Roughness and bond strength were investigated by two- and three-way analysis of variance, respectively. The correlation between the roughness and bond strength was investigated by Pearson's correlation test. RESULTS: Surface-treated samples had higher roughness compared with the untreated specimens (P=.000). For the non-aged resin nanoceramic groups, aging was a significant factor for bond strength; for the aged resin nanoceramic groups, surface treatment and aging were significant factors. The failures were mostly adhesive after thermal cycling, except in the non-aged untreated group and the aged air-abraded group, which had mostly mixed failures. Roughness and bond strength were positively correlated (P=.003). CONCLUSION: Surface treatment is not required for the repair of non-aged resin nanoceramic; for the repair of aged resin nanoceramic restorations, air abrasion is recommended.
Subject(s)
Adhesives , Aging , Microscopy, Electron, Scanning , Silicon DioxideABSTRACT
PURPOSE: This study was performed in order to assess the effect of the surface treatment methods and the use of bonding agent on the shear bond strength (SBS) between the aged CAD-CAM (computer aided design-computer aided manufacturing) hybrid materials and added composite resin. MATERIALS AND METHODS: LAVA Ultimate (LU) and VITA ENAMIC (VE) specimens were age treated by submerging in a 37℃ water bath filled with artificial saliva (Xerova solution) for 30 days. The surface was ground with #220 SiC paper then the specimens were divided into 9 groups according to the combination of the surface treatment (no treatment, grinding, air abrasion with aluminum oxide, HF acid) and bonding agents (no bonding, Adper Single Bond 2, Single Bond Universal). Each group had 10 specimens. Specimens were repaired (added) using composite resin (Filtek Z250), then all the specimens were stored for 7 days in room temperature distilled water. SBS was measured and the fractured surfaces were observed with a scanning electron microscope (SEM). One-way ANOVA and Scheffe test were used for statistical analysis (α=.05). RESULTS: Mostly groups with bonding agent treatment showed higher SBS than groups without bonding agent. Among the groups without bonding agent the groups with aluminum oxide treatment showed higher SBS. However there was no significant difference between groups except two subgroups within LU group, which revealed a significant increase of SBS when Single Bond Universal was used on the ground LU specimen. CONCLUSION: The use of bonding agent when repairing an aged LAVA Ultimate restoration is recommended.