ABSTRACT
Aim: This study aimed to collect evidence on the validity and reliability of measurements obtained from digital impression techniques. Materials and Methods: This comparative study was conducted on 31 patients. Intraoral scanner was applied to all patients. For each patient, an alginate impression of the upper maxilla was taken and later the 3D digital model was extracted by dental cone-beam computed tomography (CBCT). For preparation of plaster models, alginate impressions were taken and immediately poured with dental stone. In the next stage, a comparison was performed among the intraoral scanner, CBCT, and plaster models in terms of tooth size, dental width, and intra-arch dimensions. Results: Measuring tooth size and intra-arch dimensions in digital images obtained from intraoral scanner and CBCT were in most cases lower than the results obtained in the plaster models but the differences between digital techniques and plaster models are not clinically noticeable. Conclusions: Digital systems including intraoral scanner and CBCT are acceptable for clinical use in terms of accuracy.
Objetivo: Este estudio tuvo como objetivo recopilar evidencia sobre la validez y confiabilidad de las mediciones obtenidas a partir de técnicas de impresión digital. Materiales y Métodos: Este estudio comparativo se realizó en 31 pacientes. A todos los pacientes se les aplicó escáner intraoral. Para cada paciente, se tomó una impresión de alginato del maxilar superior y posteriormente se extrajo el modelo digital 3D mediante Tomografía computarizada de haz cónico (CBCT) dental. Para la preparación de los modelos de yeso se tomaron impresiones de alginato y se vertieron inmediatamente con yeso dental. En la siguiente etapa, se realizó una comparación entre el escáner intraoral, CBCT y los modelos de yeso en términos de tamaño de diente, ancho dental y dimensiones intraarcada. Discusión: Se encontró que la apariencia microscópica de las células fusiformes era comparable en ambos grupos. Los resultados de la citometría de flujo demostraron expresiones comparables en ambos grupos, siendo las muestras positivas para CD90, CD73, CD105, HLA ABC y negativas para CD34, CD45 y HLA DR. Hubo variaciones en la expresión de los marcadores cuando se evaluaron los potenciales de diferenciación. Conclusión: Los sistemas digitales como el escáner intraoral y el CBCT son aceptables para uso clínico en términos de precisión.
Subject(s)
Humans , Tooth/anatomy & histology , Image Interpretation, Computer-Assisted/methods , Casts, Surgical , Mandible/anatomy & histology , Imaging, Three-Dimensional/methods , Cone-Beam Computed Tomography , Flow Cytometry , Iran/epidemiologyABSTRACT
Introduction: Cerebral Palsy (CP) is characterized by a disorder of posture and movement, commonly leading to disabling orthopedic alterations, including muscle shortening, especially in the lower limbs. Stretching methods, performed gradually, are necessary to delay the impairment in function from muscle shortening. The use of serial casting aims to promote proper alignment, and an ideal and stable support base, in addition to better bone and joint health, leading to better posture, mobility, muscle function, and, subsequently, increased fitness and health.Objective: evaluate range of motion, postural control, and motor performance in children with CP, using serial casting, as well as to measure its effect on fitness through the autonomic nervous system (ANS).Methods: Sixty children and adolescents with CP, of both sexes, 3 to 12 years of age, will be divided into three groups: Groups A, B, and C, with 20 individuals each. Group A will use serial casting, Group B will use the orthosis continuously (with removal only allowed for bathing), and Group C will use the orthosis in their daily routine. Range of motion of the ankle of first and second resistance levels (R1 and R2), gross motor function measure (GMFM), and balance (measured by BERG scale) will be used in the initial and final assessments, and after 6 months and one year of follow-up. Timed-up-and-go (TUG), load distribution (baropodometry), motor performance measured through a real basketball game and the virtual MoveHero game, analysis of body angulation with "mydartfish", and cardiac autonomic modulation through heart rate variability will be assessed in three different situations: barefoot, with orthosis, and with casting.Conclusion: Serial casting demonstrates the potential to produce positive results in the treatment of individuals with CP regarding better alignment, with consequent motor and autonomic improvement.
ABSTRACT
Trophic ulcers have emerged as one of the major complications following diabetes mellitus (DM) and Hansen’s diseases (HD). In this case series, the study attempted total contact plaster boot using a readily available plaster of Paris to treat trophic ulcer for 10 subjects. A total of five subjects with DM and five subjects with HD were included based on the study criteria. Pre and post test measure of wound measurement size following total contact plaster boot were taken as an outcome measure. All ten subjects showed decrease in size of wound following fifteen days of treatment. No adverse effects were associated with this type of treatment. Subjects with trophic ulcer may benefit from the application of total contact plaster boot.
Subject(s)
Diabetes MellitusABSTRACT
OBJECTIVE: The aim of this study was to test a new portable vibrator for plaster pouring (developed for this purpose), comparing the effect of its use on the accuracy of working cast of implant-supported restorations to the conventional vibrator. MATERIAL AND METHODS: From a master cast with 2 implants, 30 transfer moldings were made randomly and divided into three groups: Group I (GI): pouring performed in an outsourced dental laboratory with conventional plaster vibrator (10 casts), Group II (GII): pouring performed in the laboratory of the Federal University of Santa Catarina (UFSC) with conventional plaster vibrator (10 casts) and Group III (GIII): pouring performed with the portable vibrator fabricated for this study (10 casts). The position of the analogue and marginal adaptation of the infrastructure were verified by testing the single screw on the master model and on the working model. The measurement of misfit was blindly performed with a precision microscope and analyzing unit, Quadra-Check 200. The data were statistically analyzed by analysis of variance (ANOVA) and the Holm-Sidak test (α=0.05). RESULTS: Means±standard deviations were as follows: GI: 19.19±4.73 µm; GII: 21.72±5.41 µm; GIII: 13.5±2.39 µm (P<0.05), with GIII significantly lower as compared to the other groups. CONCLUSION: Within the limitations of this study, it was concluded that a greater accuracy of working cast was achieved when a portable vibrator was used for casting molds.