Extraction of geraniol from palmarosa oil using hydrotropic solvents / Extracción de geraniol del aceite de palmarosa utilizando solventes hidrotrópicos

The extraction of geraniol from palmarosa oil using hydrotropic solvents was investigated. Palmarosa oil possesses an appealing rose aroma and properties like anti - inflammatory, antifungal, and antioxidant due to the presence of geraniol. The extraction of geraniol from palmarosa oil by using distillation methods like steam dis tillation and fractional distillation was a laborious process. So hydrotropes were tried for extraction. The geraniol yield and purity depend on parameters like concentration of hydrotrope, solvent volume ratio, and time period. Using the Box Benkhem Desig n (BBD), the extraction process was optimized. One of the major advantages of using hydrotropic solvents is that they were classified as green solvents, and recovery of solvents is also possible. To reduce the extraction time probe sonication is carried ou t. Different hydrotropic solvents with probe sonication are done on palmarosa oil by altering various process parameters to study the separation, yield, and purity.

Se investigó la extracción de geraniol del aceite de palmarosa utilizando solventes hidrotrópicos. El aceite de palmarosa posee un atractivo aroma a rosa y propiedades antiinflamatorias, antifúngicas y antioxidantes debido a la pr esencia de geraniol. La extracción de geraniol del aceite de palmarosa mediante métodos de destilación como la destilación por vapor y la destilación fraccionada ha sido un proceso laborioso. Por lo tanto, se probaron los hidrotropos para la extracción. El rendimiento y la pureza del geraniol dependen de parámetros como la concentración del hidrotropo, la relación de volumen del solvente y el período de tiempo. Se optimizó el proceso de extracción usando el diseño Box Benkhem (BBD). Una de las principales v entajas de usar solventes hidrotrópicos es que se clasifican como solventes verdes y también es posible recuperar los solventes. Para reducir el tiempo de extracción, se lleva a cabo una sonda de ultrasonido. Se realizan diferentes solventes hidrotropos co n sonda de ultrasonido en el aceite de palmarosa alterando varios parámetros del proceso para estudiar la separación, el rendimiento y la pureza.

Optimization of Decoction Technology and Establishment of Quality Standard for Moringa oleifera Leaf Standard Decoction / 中国实验方剂学杂志

ObjectiveBased on response surface methodology combined with principal component analysis（PCA）， the optimal decocting process of Moringa oleifera leaf standard decoction was optimized， and its multi-index quality evaluation system was established， in order to provide scientific basis for the quality control of this standard decoction. MethodResponse surface methodology and PCA were used to optimize the decoction process by taking the relative peak areas of 8 characteristic peaks and dry extract yield as indexes. Based on this， the quality of 15 batches of the standard decoction was evaluated by high performance liquid chromatography（HPLC） characteristic chromatogram， determination of major components（neochlorogenic acid， L-tryptophan， cryptochlorogenic acid， vicenin-2， isoquercetin， astragalin）， determination of active parts（total flavonoids， total organic acids， total polysaccharides， total α-amino acids， total sinapine）， dry extract yield， specific gravity and pH. ResultThe optimal decocting process was to soak M. oleifera leaves（100.00 g） for 30 min and decoct twice with the first decoction of 12 times the amount of water for 30 min and the second decoction of 10 times the amount of water for 20 min. Standard decoction containing 0.2 g·mL-1 of crude drug was defined by x¯±30%， the specific gravity was 0.722-1.340， pH was 3.86-7.16， dry extract yield was 23.1%-42.9%， and the alcohol-soluble extract content was 8.26%-15.34%. Calculated according to the dried products of the standard decoction， the contents of neochlorogenic acid， L-tryptophan， cryptochlorogenic acid， vicenin-2， isoquercetin and astragalin were 1.99-3.69， 1.20-2.22， 1.44-2.67， 0.53-0.99， 2.45-4.55， 1.22-2.26 mg·g-1， the relative transfer rates relative to the herbs were 34.37%-63.83%， 62.43%-115.94%， 64.65%-120.06%， 56.98%-105.82%， 37.46%-69.57%， 41.81%-77.64%， respectively. The contents of total flavonoids， total organic acids， total polysaccharides， total α-amino acids， total sinapine were 10.19-18.92， 11.82-21.96， 94.07-174.71， 42.69-79.27， 9.55-17.73 mg·g-1， the relative transfer rates for herbs were 25.72%-47.77%， 41.78%-77.59%， 64.90%-120.54%， 42.30%-78.57%， 34.99%-64.99%， respectively. ConclusionThe optimized decocting technology of M. oleifera leaf standard decoction is stable and feasible， and the established multi-indicator quality evaluation system can lay the foundation for the quality control of this standard decoction.

Study on extraction technology of Sophora flavescens-Phellodendron chinense drug pair / 中国药房

OBJECTIVE To study the extraction technology of Sophora flavescens-Phellodendron chinense drug pair and provide a reference for the development of new drugs for the treatment of anorectal diseases. METHODS Using the contents of total alkaloids of S. flavescens （matrine+oxymatrine）， berberine hydrochloride and total flavonoid， and extract yield as evaluation indicators， analytic hierarchy process-entropy weight method was used to calculate the weight coefficient of each indicator， and was combined with Box-Behnken design-response surface method to study the extraction technology of S. flavescens-P. chinense drug pair and verify it. RESULTS The optimal extraction technology of S. flavescens-P. chinense drug pair was immersed in 12-fold amount of 58% ethanol for 30 minutes and extracted twice， each time for 120 minutes. The relative error between the verification experimental results and the predicted value was 1.88%. CONCLUSIONS The obtained extraction technology is stable and feasible and can provide reference for the application of S. flavescens-P. chinense drug pair and development of new drugs.

Preparation and in vitro dissolution behaviors evaluation of silymarin phospholipid complex / 药学实践杂志

Objective To prepare silymarin phospholipids complex（SM-PC） and investigate its physicochemical properties. Methods On the basis of single-factor tests, the drug-lipid ratio, drug concentration and reaction temperature were selected as the factors of the central composite design and response surface methodology in the preparation of SM-PC by solvent volatilization, and the best process was optimized with the compound rate as the index. And its in vitro dissolution was measured. Results The optimum preparation technology of SM-PC was as follows: acetone was used as compound solvent, the concentration of SM was 8.0 mg/ml, the mass ratio of SM to phospholipid was 1∶1.8, the reaction temperature was 56 ℃ and the recombination rate was（95.15±1.55）% with deviation of less than 3%. The in vitro dissolution test showed that the dissolution of SM-PC was close to 90% in 60 min. The dissolution behavior of main component of silybin was similar to that of silymarin capsules（Legalon ®）, which was higher than SM-API. Conclusion SM-PC was successfully prepared by central composite design response surface method, which significantly improved the dissolution and laid a foundation for the study of subsequent preparations.

Optimization of Spirulina’s Phycocyanin Extraction Yield Using Response Surface Method

Besides cultivation, extraction is also a critical stage in enhancing the yield of phycocyanin production - a highly valuable compound from Spirulina biomass. In this study, the combined effect of three important variables in the ultrasonic-assisted extraction process on phycocyanin extraction yield, namely extraction temperature, sonication time, and solvent pH were investigated through a central composite design experiment. Furthermore, the response surface method was applied in order to define an optimal condition to achieve the highest extraction yield. The results showed that when temperature ranged from 35ºC to 45ºC, sonication time from 20 to 50 minutes, and solvent pH from 6 to 8, the average yield of 30.135±1.552 mg/g was obtained with an average purity of 0.871±0.043. A regression model was also successfully developed, which allowed a good prediction of extraction yield based on the three mentioned variables. On the other hand, an optimal condition for extraction was also proposed with sonication time = 43.57 minutes, extraction temperature = 37.6oC, and solvent pH = 6.7. These results were practically valuable for the improvement of phycocyanin extraction from Spirulina biomass

Optimization of the formulation of a porcine fibrin patch / 中国药房

OBJECTIVE To optimize the formulation of a porcine fibrin patch （abbreviated as “DBT”）. METHODS Based on single-factor tests， with the contents of fibrinogen， thrombin and collagen before freeze-drying as the factors， with the overall desirability （OD） value of adhesion strength， holding viscosity and water absorption as response value， the formulation of DBT was optimized by Box-Behnken-response surface methodology， and the verification tests were conducted. RESULTS According to the results of the single factor tests and Box-Behnken-response surface methodology， combined with the actual production， the optimal formulation of DBT was 6.5 mg/cm2 of fibrinogen， 8.0 IU/cm2 of thrombin and 5.6 mg/mL of collagen. The average OD value of 3 validation tests was 0.726 6 （RSD＝0.58%， n＝3）， and the relative error of which with the predicted value （0.733 0） was －0.87%. CONCLUSIONS The optimal formulation of DBT is stable and feasible.

Screening and optimization of the formulation of human recombinant neutrophil inhibitory factor and hirulog hybrid for injection / 中国生物制品学杂志

@#Objective To screen and optimize the formulation and technology of human recombinant neutrophil inhibitory factor and hirulog hybrid(TNHH)for injection,and investigate its stability.Methods Based on the results of the single factor experiment,with the pH range,mannitol dosage and povidone K30 dosage as independent variables,and the content of high molecular protein as response value,the response surface design(CCF)test was used to analyze the effects of the respective variables and their interaction on the content of high molecular protein in TNHH for injection to screen out the optimal formulation. In order to facilitate the operation,the optimal formulation was adjusted to prepare three batches of samples in pilot scale,which were placed at 40 ℃,75% relative humidity(RH)for 2,4 weeks and 2 ～ 8 ℃ for 3,6 months,respectively. The samples were taken and the appearance,pH,purity of reversed phase-high performance liquid chromatography(RP-HPLC)and purity of size exclusion chromatography-high performance liquid chromatography(SECHPLC)were detected to verify the stability of this formulation and process.Results The optimal formulation was pH 4. 982 6,mannitol 7. 986 4% and povidone K30 1. 902 7%,which was finally adjusted to pH 5. 0,mannitol 8. 0% and povidone K302. 0%. The TNHH preparation for injection prepared by the optimized prescription and process were stable in quality and met the clinical medication requirements.Conclusion The optimum formulation of TNHH preparation for injection is reasonable in the process and suitable for industrial production.

Optimization of extraction process and evaluation of the antibacterial and anti-inflammatory activity of blumeatin from Blumea balsamifera / 中国药房

OBJECTIVE To optimize the extraction process of blumeatin from Blumea balsamifera and to evaluate its antibacterial and anti-inflammatory activity. METHODS The content of blumeatin in the extract of B. balsamifera was determined by HPLC. On the basis of the single factor experiment， the extraction technology of blumeatin was optimized by the Box-Behnken response surface method with the volume fraction of ethanol， liquid-solid ratio and extraction time as the factors， using the yield of blumeatin as index. Microdilution method was used to determine the antibacterial activity of blumeatin against Streptococcus pyogenes， Staphylococcus aureus， Streptococcus agalactiae， Streptococcus mutans， Bacillus subtilis and Micrococcus luteus. The anti-inflammatory activity of blumeatin was evaluated by ear swelling test and capillary permeability test in mice. RESULTS The optimal extraction technology was as follows： ethanol concentration of 90%， liquid-material ratio of 15∶1， extraction time of 2 h at 80 ℃； the yield of blumeatin using this extraction process was 1.97 mg/g. The minimum inhibitory concentrations of blumeatin for S. pyogenes， S. aureus， S. agalactiae， S. mutans， B. subtilis and M. luteus were 50.00， 200.00， 400.00， 400.00， 800.00 and 1 600.00 μg/mL， respectively； the minimum bactericidal concentrations of blumeatin for S. pyogenes and S. aureus were 400.00 and 1 600.00 μg/mL， respectively. Blumeatin could significantly inhibit the ear swelling induced by xylene and capillary permeability induced by acetic acid in mice（P＜0.05 or P＜0.01）. CONCLUSIONS The optimized extraction technology of blumeatin is stable and feasible. The extracted blumeatin has a certain antibacterial effect against S. pyogenes and a good anti-inflammatory activity.

Optimization of the extraction process of Shangke Huoxue Granule by central composite design-response surface methodology / 国际中医中药杂志

Objective:To optimize the extraction process of Shangke Huoxue Granule.Methods:Taking the factors of extraction solvent multiple, extraction time and extraction times as investigation factors, and extraction amount of ferulic acid, paeoniflorin and the ratio of extraction as comprehensive evaluation indices, one-factor experimental design and central composite design-response surface methodology were adopted to optimize the extraction process of Shangke Huoxue Granule.Results:The binomial fitting equation was Y=96.16+2.42 A+0.63 B-3.76 AB-1.57 A2-1.87 B2 ( P<0.01). The optimal extraction process parameters were confirmed to be adding 16 times of water, 64 minutes each time, twice. The deviation rates between the measured values of three verification experiments and the predicted value were 2.00%, 3.23% and 0.66%. Conclusion:The established model of central composite design-response surface methodology has high predictability and the optimized extraction process is stable and feasible.

Optimization of water extraction process of Maxing kechuan granules / 中国药房

OBJECTIVE To optimize the water extraction process of Maxing kechuan granules. METHODS With the contents of ephedrine hydrochloride， bergenin， prim-O-glucosylcimifugin， 5-O-methylvisamin， naringin and hesperidin and the rate of extraction as the evaluation indexes， the weight was determined by the analytic hierarchy process（APH）-entropy weight method， and the comprehensive score was calculated as the response value. Based on the single-factor test， the Box-Behnken response surface method was used to investigate the factors， and the best water extraction process of Maxing kechuan granules was optimized； process validation was also carried out. RESULTS The best water extraction process of Maxing kechuan granules optimized was as follows： soaking for 40 minutes， adding 8 times water， and extracting for 180 minutes. After three validation tests， the comprehensive score was 94.82 （RSD＝0.96%， n＝3）， which had a small difference from the predicted value of 94.64. CONCLUSIONS The water extraction process of Maxing kechuan granules is stable and reliable， which can provide a reference for the development of the preparation.

Optimization of microwave-assisted extraction of green tea polyphenols by response surface methodology / 药学实践杂志

Objective To optimize the microwave-assisted extraction process of green tea polyphenols. Methods The extraction yield of tea polyphenols was figured up by building the standard curve of gallic acid and examining the concentration of tea polyphenols in green tea extract with the introduction of a correction factor. The effects of four single factor levels of microwave extraction time, microwave output power, liquid-to-material yield, and ethanol volume fraction on the extraction yield of tea polyphenols were primarily studied in this experiment. The response surface was applied to further optimize the extraction process of green tea polyphenols after exploring the appropriate range of four single factor levels. Results The optimal extraction process was as follows: extraction time 37 s, microwave output power 350 w, material - liquid yield 1∶45 (g/ml), ethanol volume fraction 55%, and the actual extraction yield of tea polyphenols was 25.65%, which was not much different from the theoretical value. Conclusion The microwave-assisted green tea polyphenol extraction process optimized by response surface methodology is time-saving and practicable, and the extraction yield is high.

Optimization of the preparation process of ethanol extracts from Centipeda minima and study on its anti-inflammatory activity of different extraction sites / 中国药房

OBJECTIVE To optimize the preparation technology of ethanol extracts from Centipeda minima， and investigate the anti-inflammatory activities of different extraction sites. METHODS Single factor test and response surface methodology were adopted to investigate the effects of ethanol volume fraction， extraction time， solid-liquid ratio and extraction times on the heating reflux extraction technology of total triterpenoids ethanol extract using the extraction rate of total triterpenoids of C. minima as indexes， optimize the extraction technology and carry out validation. Using dexamethasone as positive control drug， the effects of different extraction sites of C. minima （petroleum ether part， ethyl acetate part， n-butanol part， water part） on nitric oxide （NO） production in mononuclear macrophage RAW 264.7 cells of mice induced by lipopolysaccharide （LPS） were compared； the half inhibitory concentration （IC50） was calculated. RESULTS The optimal extraction technology of total triterpenoids ethanol extracts of C. minima was as follows： ethanol volume fraction of 70%， solid-liquid ratio of 1∶40 （g/mL）， extraction time of 2.0 h and extraction times of 3 times. The 3 times of validation tests showed that average extraction rate of total triterpenoids of C. minima was 1.134%， relative error of which with the predicted value was 0.02%. The petroleum ether part and ethyl acetate part of C. minima could inhibit the generation of NO in RAW 264.7 cells induced by lipopolysaccharide to different degrees. IC50 values of NO production were 2.44 μg/mL and 2.22 μg/mL， respectively， and both of them were lower than those of positive control drug dexamethasone （7.65 μg/mL）. CONCLUSIONS The optimized preparation process of ethanol extracts from C. minima is stability and feasibility. The petroleum ether part and ethyl acetate part have obvious anti-inflammatory effects.

Processing Magnoliae Officinalis Cortex with ginger juice: process optimization based on AHP-CRITIC weighting method and composition changes after processing / 中国中药杂志

The weight coefficients of appearance traits, extract yield of standard decoction, and total content of honokiol and magnolol were determined by analytic hierarchy process(AHP), criteria importance though intercrieria correlation(CRITIC), and AHP-CRITIC weighting method, and the comprehensive scores were calculated. The effects of ginger juice dosage, moistening time, proces-sing temperature, and processing time on the quality of Magnoliae Officinalis Cortex(MOC) were investigated, and Box-Behnken design was employed to optimize the process parameters. To reveal the processing mechanism, MOC, ginger juice-processed Magnoliae Officinalis Cortex(GMOC), and water-processed Magnoliae Officinalis Cortex(WMOC) were compared. The results showed that the weight coefficients of the appearance traits, extract yield of standard decoction, and total content of honokiol and magnolol determined by AHP-CRITIC weighting method were 0.134, 0.287, and 0.579, respectively. The optimal processing parameters of GMOC were ginger juice dosage of 8%, moistening time of 120 min, and processing at 100 ℃ for 7 min. The content of syringoside and magnolflorine in MOC decreased after processing, and the content of honokiol and magnolol followed the trend of GMOC>MOC>WMOC, which suggested that the change in clinical efficacy of MOC after processing was associated with the changes of chemical composition. The optimized processing technology is stable and feasible and provides references for the modern production and processing of MOC.

Optimization of extraction process of Sarcandra glabra by combination of entropy weight method with Box-Behnken response surface method / 中国药房

OBJECTIVE To optimize the extraction process of Sarcandra glabra. METHODS The contents of rosmarinic acid and isofraxidin in S. glabra were determined by HPLC； ultrasonic time， ultrasonic temperature， solid-liquid ratio （mL/g） and methanol volume fraction were investigated by single factor test. Based on the results of single factor test， experimental scheme was designed by Box-Behnken response surface method， and the entropy weight method was used to assign the weight of each index and calculate the comprehensive score. Taking the comprehensive score as the evaluation index， the extraction process of S. glabra was optimized， and then optimized extraction process was verified. RESULTS The optimal extraction technology of S. glabra included ultrasonic time of 40 min， ultrasonic temperature of 45 ℃， liquid-solid ratio of 50∶1， methanol volume fraction of 70%. The results of 3 times of verification experiment showed that average comprehensive score was 0.988 6， and the RSD was 0.50%. The deviation between the actual value and the predicted value （0.985 1） of each comprehensive score was within ±1%. CONCLUSIONS The optimized extraction method is stable， feasible and repeatable， which can provide reference for extraction of S. glabra.

Optimization of extraction process of prescription medicinal materials of compound Yangshe granules / 药学实践杂志

Objective Optimizing the extraction process of prescription medicinal materials of hospital preparation of compound Yangshe granules. Methods A high performance liquid chromatograph (HPLC) quantitative method was established for deacetyl asperulosidicacid methyl ester (DME) and ferulic acid (FC) of the active ingredient. Based on the content of DME, FC and the yield of extract, the extraction process of compound Yangshe granule extract was optimized using central composite design-response surface methodology. Results The established HPLC method of quantification of active components in compound Yangshe granules met the requirements of method validation. The optimal extraction process optimized by central composite design-response surface methodology were as follows: the weight of extraction solvent was 12 times of the medicinal slices, the alcohol concentration was 73% and the extraction time was 60 min. Conclusion In this study, the quantitative method of active components in compound Yangshe granule by HPLC has been successfully established, and the optimized extraction process is simple and easy to operate with good repeatability.

Preparation of Huoluo Xiaoling gel plaster and its transdermal penetration in vitro / 中国中药杂志

Huoluo Xiaoling Dan is a classical prescription commonly used for blood circulation and pain relief in clinic with obvious effects. To make it directly treat lesion and improve the effect, this research optimized the preparation process of Huoluo Xiaoling gel paste and further evaluated its in vitro transdermal absorption performance, so as to provide a scientific basis for its development and utilization. Using primary viscosity, holding viscosity, and sensory score as evaluation indexes, the matrix amount of gel paste was determined by the single factor test and Box-Behnken response surface method. The ultra-performance liquid chromatography(UPLC) method was established to determine the content of eight active ingredients, including Danshensu, ferulic acid, salvianolic acid B, salvianolic acid A, ligustilide, tanshinone Ⅱ_A, 11-keto-β-boswellic(KBA), and 3-acetyl-11-keto-β-boswellic acid(AKBA). A mo-dified Franz diffusion cell method was used to evaluate and compare the absorption properties of the gel paste without volatile oil and with volatile oil microemulsion. The results showed that the optimal prescription for Huoluo Xiaoling gel paste matrix was NP700(1.35 g), glycerol(7.00 g), micropowder silica gel(1.25 g), sodium carboxymethyl cellulose(0.20 g), tartaric acid(0.06 g), and glyceryl aluminum(0.04 g). The mass fractions of eight active ingredients in the paste were successively 0.48, 0.014, 0.95, 0.39, 0.57, 0.055, 0.35, and 0.97 mg·g~(-1). The results of the in vitro transdermal absorption test showed that the addition of the volatile oil or the volatile oil microemulsion promoted the transdermal absorption of the active ingredients, and the law of drug penetration conformed to the zero equation or the Higuchi equation. The gel paste prepared by the optimal prescription has good appearance and adhesion, with no residue, and has the characteristics of skeletal slow-release preparation, which is easy to reduce the number of administration, la-ying a foundation for the development of new external dosage forms of Huoluo Xiaoling Dan.

Optimized biotransformation of acid-treated water melon peel hydrolyzate into ethanol / Biotransformação otimizada de hidrolisado de casca de melancia tratada com ácido em etanol

Today, global focus of research is to explore the solution of energy crisis and environmental pollution. Like other agricultural countries, bulk quantities of watermelon peels (WMP) are disposed-off in environment as waste in Pakistan and appropriate management of this waste is the need of hour to save environment from pollution. The work emphasizes the role of ethanologenic yeasts to utilize significant sugars present in WMP for low-cost bioethanol fermentation. Dilute hydrochloric acid hydrolysis of WMP was carried out on optimized conditions employing RSM (response surface methodology) following central composite design (CCD). This experimental design is based on optimization of ethanologenesis involving some key independent parameters such as WMP hydrolysate and synthetic media ratio (X1), incubation temperature (X2) and incubation temperature (X3) for maximal ethanol yield exploiting standard (Saccharomyces cerevisiae K7) as well as experimental (Metchnikowia cibodasensisY34) yeasts. The results revealed that maximal ethanol yields obtained from S. cerevisiae K7 was 0.36±0.02 g/g of reducing sugars whereas M. cibodasensisY34, yielded 0.40±0.01 g ethanol/g of reducing sugars. The yeast isolate M. cibodasensisY34 appeared as promising ethanologen and embodies prospective potential for fermentative valorization of WMP-to-bioethanol.

Hoje, o foco global da pesquisa é explorar a solução da crise energética e da poluição ambiental. Como em outros países agrícolas, grandes quantidades de cascas de melancia (WMP) são descartadas como resíduos no meio ambiente no Paquistão, mas a gestão adequada desses resíduos é a mais recente solução para salvar o meio ambiente da poluição. O trabalho enfatiza o papel das leveduras etanologênicas para utilizar açúcares significativos presentes no WMP para fermentação de bioetanol de baixo custo. A hidrólise de ácido clorídrico diluído de WMP foi realizada em condições otimizadas empregando RSM (metodologia de superfície de resposta) e seguindo o projeto de composto central (CCD). Este projeto experimental é baseado na otimização da etanologenesis envolvendo alguns parâmetros independentes importantes, como hidrolisado de WMP e razão de meio sintético (X1), temperatura de incubação (X2) e temperatura de incubação (X3) para rendimento máximo de etanol explorando o padrão (Saccharomyces cerevisiae K7) também como leveduras experimentais (Metchnikowia cibodasensis Y34). Os resultados revelaram que os rendimentos máximos de etanol obtidos a partir de S. cerevisiae K7 foi de 0,36 ± 0,02 g / g de açúcares redutores, enquanto M. cibodasensis Y34 rendeu 0,40 ± 0,01 g de etanol / g de açúcares redutores. O isolado de levedura M. cibodasensis Y34 apareceu como um etanologeno promissor e incorpora um potencial prospectivo para a valorização fermentativa de WMP em bioetanol.

Optimized biotransformation of acid-treated water melon peel hydrolyzate into ethanol

Abstract Today, global focus of research is to explore the solution of energy crisis and environmental pollution. Like other agricultural countries, bulk quantities of watermelon peels (WMP) are disposed-off in environment as waste in Pakistan and appropriate management of this waste is the need of hour to save environment from pollution. The work emphasizes the role of ethanologenic yeasts to utilize significant sugars present in WMP for low-cost bioethanol fermentation. Dilute hydrochloric acid hydrolysis of WMP was carried out on optimized conditions employing RSM (response surface methodology) following central composite design (CCD). This experimental design is based on optimization of ethanologenesis involving some key independent parameters such as WMP hydrolysate and synthetic media ratio (X1), incubation temperature (X2) and incubation temperature (X3) for maximal ethanol yield exploiting standard (Saccharomyces cerevisiae K7) as well as experimental (Metchnikowia cibodasensisY34) yeasts. The results revealed that maximal ethanol yields obtained from S. cerevisiae K7 was 0.36±0.02 g/g of reducing sugars whereas M. cibodasensisY34, yielded 0.40±0.01 g ethanol/g of reducing sugars. The yeast isolate M. cibodasensisY34 appeared as promising ethanologen and embodies prospective potential for fermentative valorization of WMP-to-bioethanol.

Resumo Hoje, o foco global da pesquisa é explorar a solução da crise energética e da poluição ambiental. Como em outros países agrícolas, grandes quantidades de cascas de melancia (WMP) são descartadas como resíduos no meio ambiente no Paquistão, mas a gestão adequada desses resíduos é a mais recente solução para salvar o meio ambiente da poluição. O trabalho enfatiza o papel das leveduras etanologênicas para utilizar açúcares significativos presentes no WMP para fermentação de bioetanol de baixo custo. A hidrólise de ácido clorídrico diluído de WMP foi realizada em condições otimizadas empregando RSM (metodologia de superfície de resposta) e seguindo o projeto de composto central (CCD). Este projeto experimental é baseado na otimização da etanologenesis envolvendo alguns parâmetros independentes importantes, como hidrolisado de WMP e razão de meio sintético (X1), temperatura de incubação (X2) e temperatura de incubação (X3) para rendimento máximo de etanol explorando o padrão (Saccharomyces cerevisiae K7) também como leveduras experimentais (Metchnikowia cibodasensis Y34). Os resultados revelaram que os rendimentos máximos de etanol obtidos a partir de S. cerevisiae K7 foi de 0,36 ± 0,02 g / g de açúcares redutores, enquanto M. cibodasensis Y34 rendeu 0,40 ± 0,01 g de etanol / g de açúcares redutores. O isolado de levedura M. cibodasensis Y34 apareceu como um etanologeno promissor e incorpora um potencial prospectivo para a valorização fermentativa de WMP em bioetanol.

Optimized biotransformation of acid-treated water melon peel hydrolyzate into ethanol / Biotransformação otimizada de hidrolisado de casca de melancia tratada com ácido em etanol

Abstract Today, global focus of research is to explore the solution of energy crisis and environmental pollution. Like other agricultural countries, bulk quantities of watermelon peels (WMP) are disposed-off in environment as waste in Pakistan and appropriate management of this waste is the need of hour to save environment from pollution. The work emphasizes the role of ethanologenic yeasts to utilize significant sugars present in WMP for low-cost bioethanol fermentation. Dilute hydrochloric acid hydrolysis of WMP was carried out on optimized conditions employing RSM (response surface methodology) following central composite design (CCD). This experimental design is based on optimization of ethanologenesis involving some key independent parameters such as WMP hydrolysate and synthetic media ratio (X1), incubation temperature (X2) and incubation temperature (X3) for maximal ethanol yield exploiting standard (Saccharomyces cerevisiae K7) as well as experimental (Metchnikowia cibodasensisY34) yeasts. The results revealed that maximal ethanol yields obtained from S. cerevisiae K7 was 0.36±0.02 g/g of reducing sugars whereas M. cibodasensisY34, yielded 0.40±0.01 g ethanol/g of reducing sugars. The yeast isolate M. cibodasensisY34 appeared as promising ethanologen and embodies prospective potential for fermentative valorization of WMP-to-bioethanol.

Resumo Hoje, o foco global da pesquisa é explorar a solução da crise energética e da poluição ambiental. Como em outros países agrícolas, grandes quantidades de cascas de melancia (WMP) são descartadas como resíduos no meio ambiente no Paquistão, mas a gestão adequada desses resíduos é a mais recente solução para salvar o meio ambiente da poluição. O trabalho enfatiza o papel das leveduras etanologênicas para utilizar açúcares significativos presentes no WMP para fermentação de bioetanol de baixo custo. A hidrólise de ácido clorídrico diluído de WMP foi realizada em condições otimizadas empregando RSM (metodologia de superfície de resposta) e seguindo o projeto de composto central (CCD). Este projeto experimental é baseado na otimização da etanologenesis envolvendo alguns parâmetros independentes importantes, como hidrolisado de WMP e razão de meio sintético (X1), temperatura de incubação (X2) e temperatura de incubação (X3) para rendimento máximo de etanol explorando o padrão (Saccharomyces cerevisiae K7) também como leveduras experimentais (Metchnikowia cibodasensis Y34). Os resultados revelaram que os rendimentos máximos de etanol obtidos a partir de S. cerevisiae K7 foi de 0,36 ± 0,02 g / g de açúcares redutores, enquanto M. cibodasensis Y34 rendeu 0,40 ± 0,01 g de etanol / g de açúcares redutores. O isolado de levedura M. cibodasensis Y34 apareceu como um etanologeno promissor e incorpora um potencial prospectivo para a valorização fermentativa de WMP em bioetanol.

Optimization of extraction process for classic prescription Yihuang Decoction based on Box-Behnken design-response surface methodology, standard relation, and analytic hierarchy process combined with entropy weight method / 中国中药杂志

Based on the concept of quality by design(QbD), the Box-Behnken design-response surface methodology combined with standard relation(SR) and analytic hierarchy process(AHP)-entropy weight method(EWM) was applied to optimize the extraction process of the classic prescription Yihuang Decoction. The content of geniposidic acid, phellodendrine hydrochloride, and berberine hydrochloride in Yihuang Decoction, the extract yield, and fingerprint similarity were used as the critical quality attributes(CQAs) of the extraction process. The extraction time, water addition, and extraction times were used as the critical process parameters(CPPs). After determining the levels of each factor and level through single-factor experiments, response surface experiments were designed according to the Box-Behnken principle, and the experimental results were analyzed. The SR between each sample and the reference sample under various evaluation indicators of different extraction parameters was calculated. The weights of the five evaluation indicators were determined using AHP-EWM, followed by comprehensive evaluation. A function model between CPPs and CQAs characterized by comprehensive scores was established to predict the optimal extraction process parameters. In the final comprehensive weight coefficients, the yield rate accounted for 43.1%, and the content of berberine hydrochloride, phellodendrine hydrochloride, and geniposidic acid accounted for 35.1%, 6.3%, and 15.5%, respectively. After comprehensive score analysis with SR, the established second-order polynomial model was statistically significant(P<0.01, and the lack of fit was not significant). The predicted optimal extraction conditions for Yihuang Decoction were determined as follows: 8-fold volume of water, extraction time of 1.5 h, and extraction once. The mean comprehensive score of the validation experiment was 85.77, with an RSD of 0.99%, and it met the quality control stan-dards for the reference sample of Yihuang Decoction. The results indicate that the optimized extraction process for Yihuang Decoction is stable and reliable, and the water extract is close in quality attributes to the reference sample. This can serve as a foundation for the research and development of granules in the future. Box-Behnken design-response surface methodology combined with SR and AHP-EWM can provide references for the modern extraction process research of other classic prescriptions.