Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 51
Filter
1.
Odovtos (En línea) ; 25(2)ago. 2023.
Article in English | LILACS-Express | LILACS | ID: biblio-1448740

ABSTRACT

The first objective of this research was to evaluate the effectiveness of XP-Endo Finisher on dentinal tubule penetration of irrigation solution using confocal laser scanning microscopy. The main purpose of this research was to compare the effect of cold lateral condensation, continuous wave obturation and core-carrier based techniques on sealer penetration. Sixty mandibular premolars were prepared and allocated into two experimental groups (n=30) as the final irrigation technique and obturation technique experiment. In the final irrigation technique experiment, final irrigation was performed with XP-Endo Finisher, passive ultrasonic irrigation (PUI) and conventional needle irrigation (CNI) (n=10). The roots in the obturation technique experiment were also assigned into 3 groups and obturated with cold lateral condensation, continuous-wave obturation and core-carrier techniques (n=10). The most effective activation method, which emerged as a result of the first part of this study, was used as the final irrigation method in the obturation technique experiment. Then, all roots were sectioned in 1-mm-thick slices at 3mm from the apex for scanning. In terms of depth and percentage of material penetration, CNI exhibited significantly the lowest values and no significant difference was found between others. Also, there was no significant difference among obturation methods. In conclusion, XP-Endo Finisher and PUI are more effective than CNI on irrigant penetration. Sealer penetration into dentinal tubules is independent of obturation techniques.


El objetivo principal de esta investigación fue evaluar la eficacia de XP- Endo Finisher en la penetración de la solución de irrigación en los túbulos dentinarios mediante microscopía de láser confocal. Se prepararon sesenta premolares mandibulares y se distribuyeron en dos grupos experimentales (n=30) según el tipo de método de evaluación utilizado. En el experimento de la técnica de irrigación final, la irrigación final se realizó con XP-Endo Finisher, irrigación ultrasónica pasiva (PUI) e irrigación con aguja convencional (CNI) (n=10). Las raíces en el experimento de la técnica de obturación también se asignaron en 3 grupos y se obturaron con técnicas de condensación lateral fría, obturación de onda continua y portador de núcleo (n=10). El método de activación más eficaz, que surgió como resultado de la primera parte de este estudio, se utilizó como método de irrigación final en el experimento de la técnica de obturación. Luego, todas las raíces se seccionaron en muestras de 1mm de espesor. En términos de profundidad y porcentaje de penetración del material, CNI exhibió significativamente los valores más bajos y no se encontraron diferencias significativas entre los demás. Además, no hubo diferencias significativas entre los métodos de obturación. En conclusión, XP-Endo Finisher y PUI son más efectivos que CNI en la penetración del irrigante. La penetración del sellador en los túbulos dentinarios es independiente de las técnicas de obturación.

2.
Acta Anatomica Sinica ; (6): 261-265, 2022.
Article in Chinese | WPRIM | ID: wpr-1015347

ABSTRACT

Objective To establish a method of in vivo microvascular imaging and blood flow calculation with better continuous imaging quality. Methods Anesthetized mice with dye injection through tail vein were placed in the center of a 37 ℃ hot plate holder. The stripped tissues were placed in a self ̄made low edge confocal dish and immersed in normal saline. The exposed tissues were pressed with self ̄made circular metal pads of different weights and sizes. The microvascular blood flow in the liver and hind limb of pregnant mice (n = 3) and normal female mice (n = 3) were measured by the improved device. Results This method can accomplish stable and continuous imaging. The blood flow velocity of liver and hind limb of pregnant mice were faster than that of normal female mice. Conclusion This method can be used for three ̄dimensional imaging of microvessels and detection of blood flow velocity in organs.

3.
Acta Pharmaceutica Sinica B ; (6): 3262-3271, 2021.
Article in English | WPRIM | ID: wpr-922792

ABSTRACT

Tumor metastasis is responsible for chemotherapeutic failure and cancer-related death. Moreover, circulating tumor cell (CTC) clusters play a pivotal role in tumor metastasis. Herein, we develop cancer-specific calcium nanoregulators to suppress the generation and circulation of CTC clusters by cancer membrane-coated digoxin (DIG) and doxorubicin (DOX) co-encapsulated PLGA nanoparticles (CPDDs). CPDDs could precisely target the homologous primary tumor cells and CTC clusters in blood and lymphatic circulation. Intriguingly, CPDDs induce the accumulation of intracellular Ca

4.
Journal of Prevention and Treatment for Stomatological Diseases ; (12): 356-360, 2021.
Article in Chinese | WPRIM | ID: wpr-873686

ABSTRACT

@#Dental bonding technology and materials have been used widely in dentistry because of their excellent properties. The development of novel bonding technology and materials is constantly being performed to improve the effect of dental bonding restorations. Observation and analysis of the dental bonding interface is one of the most important methods for laboratory evaluation of bonding efficiency. This paper aims to review the methods of observation and analysis of dental bonding interfaces to provide a reference for the selection of evaluation methods in dental bonding research. The features of 6 methods, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), confocal laser scanning microscopy (CLSM), Raman spectroscopy (RS), optical coherence tomography (OCT) and atomic force microscopy (AFM), were described and summarized. Among these methods, SEM and TEM are used most often in the analysis of fine structures; CLSM and OCT are used for the acquisition of characteristic image signals, such as microleakage and exogenous and endogenous fluorescence; and RS and AFM can test chemical composition and mechanical properties.

5.
Braz. dent. j ; 31(2): 109-115, Mar.-Apr. 2020. tab, graf
Article in English | LILACS, BBO | ID: biblio-1132277

ABSTRACT

Abstract This study aimed to evaluate penetrability on dentinal tubule of a new bioceramic sealer through confocal laser scanning microscopy (CLSM). A specific fluorophore (Fluo-3) was mixed with the sealer. Forty distobuccal roots from maxillary molars were selected, and root canal preparation was carried out with Wave One Gold # 35.06 instruments. Roots were randomly assigned to 4 groups according to the filling procedures: Bioceramic/Lentulo (Sealer Plus BC); Bioceramic/EasyClean group, three activation of the sealer (3x20 s) with Easy Clean instrument; Bioceramic/Irrisonic: ultrasonic activation for 30 s; and AHplus/Lentulo: epoxy resin based sealer (AH Plus) was utilized with the same protocol as the BC/LE group. After 72 h, specimens were transversally sectioned at 2 and 7 mm from root apex and then analyzed through CLSM. Sealer penetration area on dentinal tubule was measured by Adobe Photoshop CC2018. Kruskal Wallis and Wilcoxon T tests were carried out. Penetrability results were similar for both sealers regardless of which technique was performed to activate them inside the root canal (p>0.05). It is reasonable to conclude that penetration of bioceramic and epoxy resin based sealers occurred unimpressively. The type of instrument used to activate bioceramic sealer did not affect penetrability. Fluo 3 should be recommended as the fluorophore to evaluate dentinal tubule penetration of bioceramic sealers.


Resumo Este estudo objetivou avaliar a penetração nos túbulos dentinários de um novo cimento biocerâmico utilizando microscopia confocal de varredura a laser (MCVL). Um fluoróforo específico (Fluo-3) foi misturado com o cimento. Quarenta raízes distovestibulares de molares superiores foram selecionados e o preparo do canal radicular foi realizado com instrumentos Wave One Gold #35.06. As raízes foram divididas randomicamente em quatro grupos de acordo com os procedimentos obturadores: Bioceramic/Lentulo: cimento biocerâmico (Sealer Plus BC); Bioceramic/EasyClean: três ativações do cimento com instrumento Easy Clean (3 x 20 s); Bioceramic/Irrisonic: ativação ultrassônica do cimento por 30 s e AHplus/Lentulo: cimento à base de resina epóxica (AH Plus) foi utilizado com o mesmo protocolo que o grupo Bioceramic/Lentulo. Após 72h, os espécimes foram seccionados transversalmente em 2 e 7 mm do ápice radicular e analisados com MCVL. A área de penetração nos túbulos dentinários foi mensurada com Adobe Photoshop CC2018. O teste de Kruskal Wallis e T de Wilcoxon foram realizados. Os resultados de penetração foram similares para ambos os cimentos independentemente de qual técnica foi utilizada para ativá-los no interior do canal radicular (p>0,05). É razoável concluir que a penetração de cimentos biocerâmicos e à base de resina epóxica ocorreram de forma pouco expressiva. O tipo de ativação do cimento biocerâmcio não afeta sua penetrabilidade nos túbulos dentinários. Fluo 3 deve ser recomendado como o fluoróforo para avaliar a penetração intratubular de cimentos biocerâmicos.


Subject(s)
Root Canal Filling Materials , Calcium , Root Canal Obturation , Silicates , Calcium Compounds , Microscopy, Confocal , Dental Pulp Cavity , Epoxy Resins
6.
Braz. dent. sci ; 23(3): 1-8, 2020. ilus
Article in English | BBO, LILACS | ID: biblio-1104271

ABSTRACT

Objective: The influence of four root canal filling techniques on the penetration of an endodontic sealer into dentinal tubules and the gutta percha/ sealer ratio (GP/SR) in root canals was evaluated using confocal laser scanning microscopy (CLSM). Material and Methods: Roots of the maxillary central incisors (n=40) were prepared with ProTaper Universal files up to file F5 and assigned to five groups: continuous wave condensation, lateral condensation, single cone, Thermafill®, and negative control group. After root canal filling with gutta-percha and AH26, along with the addition of 0.01% fluorescein, the roots were cut into 2-mm slices. Using CLSM, the specimens were transversely sectioned at 3, 6, and 10 mm from the apex. Results: Sealer penetration was deeper and more frequent at 10 mm than at the 6mm and 3mm for all obturation technique. Penetration was not significantly affected by obturation techniques except single master cone tecnique. Single cone technique demonstrated the lowest sealer penetration at all levels. However, sealer thickness was strongly dependent on obturation technique. Termafill® demostrated superior GP ratio followed by continuous wave condensation, lateral condensation and single cone. Conclusion: In conclusion, the single cone technique resulted in lower sealer penetration than the other techniques, which did not differ significantly from each other. However, sealer thickness was strongly dependent on obturation technique. Termafill® demostrated superior GP ratio followed by continuous wave condensation, lateral condensation and single cone. (AU)


Objetivo: A influência de quatro técnicas de obturação do canal radicular na penetração de um cimento endodôntico nos túbulos dentinários e a relação gutapercha / cimento (GP / CIM) em canais radiculares foram avaliadas por microscopia de varredura confocal a laser (MVCL). Material e Métodos: As raízes de incisivos centrais superiores (n = 40) foram preparadas com limas ProTaper Universal até a lima F5 e distribuídas em cinco grupos: condensação de onda contínua, condensação lateral, cone único, Thermafill® e grupo de controle negativo. Após o preenchimento do canal radicular com guta-percha e AH26, juntamente com a adição de 0,01% de fluoresceína, as raízes foram cortadas em fatias de 2 mm. Usando MVCL, as amostras foram seccionadas transversalmente a 3, 6 e 10 mm do ápice. Resultados: A penetração do cimento foi mais profunda e mais frequente em 10 mm do que nos 6 mm e 3 mm para todas as técnicas de obturação. A penetração não foi significativamente afetada pelas técnicas de obturação, exceto pela técnica de cone mestre único. A técnica de cone único demonstrou a menor penetração do cimento em todos os níveis. No entanto, a espessura do cimento foi fortemente dependente da técnica de obturação. O Termafill® demonstrou uma relação superior de GP, seguida por condensação de onda contínua, condensação lateral e cone único. Conclusão: Em conclusão, a técnica de cone único resultou em menor penetração do cimento do que as outras técnicas, que não diferiram significativamente uma da outra. No entanto, a espessura do cimento foi fortemente dependente da técnica de obturação. O Termafill® demonstrou uma relação superior de GP, seguida por condensação contínua das ondas, condensação lateral e cone único. (AU)


Subject(s)
Root Canal Obturation , Microscopy, Confocal , Dental Cements , Gutta-Percha
7.
International Eye Science ; (12): 1295-1298, 2020.
Article in Chinese | WPRIM | ID: wpr-822264

ABSTRACT

@#AIM: To analyze and study the corneal nerve invasion phenomenon of Bowman's membrane in patients with IIIA lattice corneal dystrophy by confocal laser scanning microscopy. Quantitative analysis of 10a continuous observation image data was performed, followed by self-control studies.<p>METHODS: A total of 10 patients(13 eyes)with IIIA Lattice corneal dystrophy were continuously examined by confocal laser scanning microscopy. The data were observed and analyzed. <p>RESULTS: The normal corneal nerve of Bowman's membrane(Grade 0)of IIIA LCD patients gradually decreased with the prolongation of observation time. The nerves of grade I to V involved(amyloid-wrapped nerve fibers)gradually increased correspondingly. So suggested that the corneal nerve invasion of Bowman's membrane(amyloid deposits)in patients with IIIA LCD were gradually increasing with time. <p>CONCLUSION: In patients with type ⅢA lattice corneal dystrophy, there is a neurotropic phenomenon in Bowman's membrane, which gradually worsens with the aggravation of the lesion. This lesion can explain the recurrent epithelial damage of the IIIA LCD from some degrees. Continuous observation of patients with type IIIA LCD by corneal laser confocal microscopy can well understand the development of the lesion and explain its clinical manifestations.

8.
Braz. dent. j ; 30(1): 36-42, Jan.-Feb. 2019. tab, graf
Article in English | LILACS | ID: biblio-989435

ABSTRACT

Abstract Maltodextrins, derived from corn starch, have been added to industrialized food combined with sucrose. However it is not clear the diffusion properties of the dental biofilm matrix and the tridimensional structure of multispecies biofilms formed in the presence of these carbohydrates. Therefore, the aim of study was to investigate by confocal laser scanning microscopy (CLSM) the structural organization of the multispecies dental biofilm formed in situ under exposure to sucrose associated to maltodextrin. Adult volunteers wore an intraoral palatal appliance containing bovine enamel blocks. They were instructed to remove the appliance 8 times per day and drop the following solutions on the enamel blocks: deionized distilled water (DDW), maltodextrin, sucrose + maltodextrin or sucrose. Biofilms formed were stained and the percentage of extracellular polysaccharide (%EPS) and thickness were determined by CLSM. Biofilm formed in the presence of sucrose and sucrose + maltodextrin presented similar %EPS and higher than DDW and maltodextrin. Regarding to the biofilm thickness, sucrose and sucrose + maltodextrin treatments were thicker than DDW and maltodextrin and similar between them. The structural organization of the multispecies dental biofilm formed in situ in the presence of sucrose does not change when this carbohydrate is associated to maltodextrin.


Resumo Maltodextrinas, derivadas do amido de milho, tem sido adicionadas a alimentos industrializados combinadas à sacarose. Entretanto não estão esclarecidas as propriedades de difusão na matriz do biofilme dental e a estrutura tridimensional de biofilmes multiespécies formados na presença destes carboidratos. Portanto o objetivo deste estudo foi avaliar, através da microscopia confocal de escaneamento a laser (MCEL), a organização estrutural do biofilme dentário multiespécie formado in situ exposto à sacarose associada a maltodextrina. Voluntários adultos utilizaram dispositivos intraorais palatinos contendo blocos de esmalte bovino. Eles foram instruídos a remover os dispositivos 8 vezes por dia e gotejar as seguintes soluções sobre os blocos de esmalte: água destilada e deionizada (ADD), maltodextrina, sacarose+maltodextrina ou sacarose. Os biofilmes formados foram corados e o percentual de polissacarídeos extracelulares (%PEC) e suas espessuras foram determinados através da MCEL. Os biofilmes formados na presença de sacarose e sacarose+maltodextrina apresentaram os %PEC similares entre si, entretanto maiores do que os grupos submetidos a ADD e maltodextrina. Em relação à espessura do biofilme formado, os tratamentos sacarose e sacarose+maltodextrina apresentaram espessuras similares entre si, e maiores quando comparados aos grupos ADD e maltodextrina. A organização estrutural do biofilme dentário multiespécie formado in situ na presença de sacarose não é alterado quando este carbiodrato é associado a maltodextrina.


Subject(s)
Humans , Adult , Young Adult , Polysaccharides/metabolism , Sucrose/metabolism , Biofilms , Orthodontic Appliances , Double-Blind Method , Microscopy, Confocal , Cross-Over Studies
9.
The Korean Journal of Parasitology ; : 581-585, 2019.
Article in English | WPRIM | ID: wpr-786647

ABSTRACT

Confocal laser scanning microscopy (CLSM) was used to examine archaeoparasitological specimens from coprolites associated with La Cueva de los Muertos Chiquitos (CMC) located near present-day Durango, Mexico. The eggs for 4 different types of parasites recovered from CMC coprolites were imaged using CLSM to assist with identification efforts. While some of the parasite eggs recovered from CMC coprolites were readily identified using standard light microscopy (LM), CLSM provided useful data for more challenging identifications by highlighting subtle morphological features and enhancing visualization of parasite egg anatomy. While other advanced microscopy techniques, such as scanning electron microscopy (SEM), may also detect cryptic identifying characters, CLSM is less destructive to the specimens. Utilizing CLSM allows for subsequent examinations, such as molecular analyses, that cannot be performed following SEM sample preparation and imaging. Furthermore, CLSM detects intrinsic autofluorescence molecules, making improved identification independent of resource and time-intensive protocols. These aspects of CLSM make it an excellent method for assisting in taxonomic identification and for acquiring more detailed images of archaeoparasitological specimens.


Subject(s)
Eggs , Methods , Mexico , Microscopy , Microscopy, Confocal , Microscopy, Electron, Scanning , Ovum , Parasites
10.
Chinese Traditional and Herbal Drugs ; (24): 4209-4218, 2019.
Article in Chinese | WPRIM | ID: wpr-850894

ABSTRACT

Objective: Human hepatoma SMMC-7721 cells were transplanted into nude mice to study the tissue distribution of nanostructured lipid carrier modified by hyaluronic acid (HA-OUR-NLC) loaded with three components in Panax ginseng (oleanolic acid, ursolic acid, and ginsenosider Rg3, OUR). Methods: FITC and DiR were used as fluorescent probes to dynamically monitor the HA-OUR-NLC targeted behavior of various tissues and organs through fluorescence endoscopic confocal imaging and in vivo imaging studies. Results: RUE values of oleanolic acid, ursolic acid, and ginsenosider Rg3 in tumors were significantly increased in HA-OUR-NLC group, reaching 2.51 ± 1.23, 2.27 ± 1.43, and 2.77 ± 0.25, respectively, which indicated that nanoparticles modified by hyaluronic acid could enhance drug uptake in tumors. The DiR accumulation in tumors of DiR-HA-OUR-NLC was higher than that of DiR-OUR-NLC by the visualized fluorescence of in vivo imaging. Conclusion: It indicated that nanoparticles modified by hyaluronic acid loaded with three components in P. ginseng can be enriched in the tumor site of liver cancer, which is in line with the expectation and can significantly improve the tumor targeting of the drug delivery system.

11.
Restorative Dentistry & Endodontics ; : e46-2018.
Article in English | WPRIM | ID: wpr-718257

ABSTRACT

OBJECTIVES: This study was to evaluate the antibacterial effect of different instrumentation and irrigation techniques using confocal laser scanning microscopy (CLSM) after root canal inoculation with Enterococcus faecalis (E. faecalis). MATERIALS AND METHODS: Mesiobuccal and mesiolingual canals of extracted mandibular molars were apically enlarged up to a size 25 hand K-file, then autoclaved and inoculated with E. faecalis. The samples were randomly divided into 4 main groups according to the system of instrumentation and irrigation: an XP-endo Shaper (XPS) combined with conventional irrigation (XPS/C) or an XP-endo Finisher (XPF) (XPS/XPF), and iRaCe combined with conventional irrigation (iRaCe/C) or combined with an XPF (iRaCe/XPF). A middle-third sample was taken from each group, and then the bacterial reduction was evaluated using CLSM at a depth of 50 µm inside the dentinal tubules. The ratio of red fluorescence (dead cells) to green-and-red fluorescence (live and dead cells) represented the percentage of bacterial reduction. The data were then statistically analyzed using the Kruskal-Wallis test for comparisons across the groups and the Dunn test was used for pairwise comparisons. RESULTS: The instrumentation and irrigation techniques had a significant effect on bacterial reduction (p < 0.05). The iRaCe/XPF group showed the strongest effect, followed by the XPS/XPF and XPS/C group, while the iRaCe/C group had the weakest effect. CONCLUSIONS: Combining iRaCe with XPF improved its bacterial reduction effect, while combining XPS with XPF did not yield a significant improvement in its ability to reduce bacteria at a depth of 50 µm in the dentinal tubules.


Subject(s)
Bacteria , Dental Pulp Cavity , Dentin , Disinfection , Enterococcus faecalis , Fluorescence , Hand , Microscopy, Confocal , Molar
12.
Chongqing Medicine ; (36): 1155-1157, 2018.
Article in Chinese | WPRIM | ID: wpr-691921

ABSTRACT

Objective To evaluate the clinical effect of fire needle in treating vitiligo and the characteristics of vitiligo image by the confocal laser scanning microscope(CLSM).Methods The randomized self-controlled experiment design was adopted.Each patient selected two symmetric or adjacent white patches and randomly received the fire needle treatment or tacrolimus treatment. The duration of treatment was 3 months.The CLSM images of white patches were recorded before treatment and after 3,6 times of fire needle treatment.Results Among 41 cases of stable stage vitiligo,The effective rates of the fire needle group and tacrolimus group were 82.9% and 78.0% respectively,and the difference was not statistically significant(P>0.05).After fire needle treat-ment,dentritic melanin cells appeared,the pigment granules gradually appeared around the basal layer and corpora papillare,and formed the pigment ring.Conclusion Fire needle and tacrolimus have the similar effect in treating vitiligo,moreover CLSM can be used as the non-invasive,objective and reliable detection means of the recovery of vitiligo melanocyte.

13.
J. appl. oral sci ; 25(5): 523-532, Sept.-Oct. 2017. tab, graf
Article in English | LILACS, BBO | ID: biblio-893652

ABSTRACT

Abstract Objectives: This study investigated whether increasing the concentration of acidic monomers in one-step adhesives would allow reducing their application time without interfering with the bonding ability to primary enamel and dentin. Material and methods: Experimental one-step self-etch adhesives were formulated with 5 wt% (AD5), 20 wt% (AD20), or 35 wt% (AD35) acidic monomer. The adhesives were applied using rubbing motion for 5, 10, or 20 s. Bond strengths to primary enamel and dentin were tested under shear stress. A commercial etch-and-rinse adhesive (Single Bond 2; 3M ESPE) served as reference. Scanning electron microscopy was used to observe the morphology of bonded interfaces. Data were analysed at p<0.05. Results: In enamel, AD35 had higher bond strength when rubbed for at least 10 s, while application for 5 s generated lower bond strength. In dentin, increased acidic monomer improved bonding only for 20 s rubbing time. The etch-and-rinse adhesive yielded higher bond strength to enamel and similar bonding to dentin as compared with the self-etch adhesives. The adhesive layer was thicker and more irregular for the etch-and-rinse material, with no appreciable differences among the self-etch systems. Conclusion: Overall, increasing the acidic monomer concentration only led to an increase in bond strength to enamel when the rubbing time was at least 10 s. In dentin, despite the increase in bond strength with longer rubbing times, the results favoured the experimental adhesives compared to the conventional adhesive. Reduced rubbing time of self-etch adhesives should be avoided in the clinical setup.


Subject(s)
Humans , Dental Bonding/methods , Dentin-Bonding Agents/chemistry , Bisphenol A-Glycidyl Methacrylate/chemistry , Dental Enamel/drug effects , Dentin/drug effects , Methacrylates/chemistry , Solvents/chemistry , Surface Properties/drug effects , Time Factors , Materials Testing , Water/chemistry , Microscopy, Electron, Scanning , Reproducibility of Results , Analysis of Variance , Dental Restoration Failure , Shear Strength , Glycerol/chemistry
14.
Braz. dent. j ; 28(3): 380-384, May-June 2017. tab, graf
Article in English | LILACS | ID: biblio-888653

ABSTRACT

Abstract The influence of root canal filling techniques on the penetration of AH Plus into dentinal tubules was evaluated using confocal laser scanning microscopy (CLSM) and the impact on the bond strength of the filling material on the root dentin was evaluated using the push-out test. Roots of the maxillary central incisors (n=40) were prepared with ProTaper Universal and assigned to four groups: lateral condensation, vertical compaction, modified Tagger hybrid and single cone. After root canal filling with gutta-percha and AH Plus, along with the addition of 0.01% fluorescein, the roots were cut into 2-mm slices. CLSM was performed on the first slice of each root third, followed by the push-out test. The second slice was analyzed under SEM. ANOVA demonstrated a statistically significant difference between the root canal filling techniques and the root thirds (p<0.05). For percent penetration, Tukey's test showed that the vertical compaction (91.77±13.51), lateral condensation (89.18±10.91) and modified Tagger hybrid (87.53±15.42) presented the highest values, which significantly differed (p<0.05) from those of the single cone (78.19±22.46). For bond strength (MPa), lateral condensation (3.42±0.54) and vertical compaction (3.47±0.53) had the highest values (p<0.05), while the modified Tagger hybrid (2.19±0.41) and single cone (0.54±0.21) had the lowest. In conclusion, the lateral condensation, vertical compaction and Modified Tagger's hybrid techniques resulted in greater penetration and bond strength to the intra-radicular dentin.


Resumo Avaliou-se a influência da técnica obturadora na penetração do cimento AH Plus nos túbulos dentinários, por meio de microscopia confocal de varredura a laser (MCVL), e o impacto na resistência de união do material obturador à dentina, por meio do teste de push out. Raízes de incisivos centrais superiores (n=40) foram preparadas com ProTaper Universal e distribuídas em 4 grupos: Condensação lateral, Compactação vertical, Híbrida de Tagger Modificada e Cone único. Após obturação com guta percha e AH Plus acrescido de fluoresceína 0,01%, as raízes foram seccionadas em slices de 2,0 mm. O primeiro slice de cada terço foi submetido à MCVL e, posteriormente, ao teste de push out. O segundo slice foi analisado em MEV. ANOVA demonstrou diferença estatisticamente significante para as técnicas obturadoras e terços radiculares (p<0,05). Para o percentual de penetração, Tukey evidenciou que compactação vertical (91,77±13,51), Condensação lateral (89,18±10,91) e Híbrida de Tagger Modificada (87,53±15,42) apresentaram os maiores valores, estatisticamente diferentes (p<0,05) da Cone único (78,19±22,46). Na resistência de união (MPa), Condensação lateral (3,42±0,54) e Compactação vertical (3,47±0,53) obtiveram os maiores valores, diferentes (p<0,05) da Híbrida de Tagger Modificada (2,19±0,41) e da Cone único (0,54±0,21), que teve os menores valores. Concluiu-se que as técnicas obturadoras Condensação lateral, Compactação vertical e Híbrida de Tagger Modificada propiciaram maior penetração e resistência de união à dentina intrarradicular.


Subject(s)
Humans , Dental Bonding/methods , Dentin/chemistry , Root Canal Filling Materials/chemistry , Root Canal Therapy/methods , Microscopy, Confocal , Microscopy, Electron, Scanning
15.
Restorative Dentistry & Endodontics ; : 91-97, 2016.
Article in English | WPRIM | ID: wpr-205729

ABSTRACT

OBJECTIVES: The purpose of this ex vivo study was to compare the antifungal activity of a synthetic peptide consisting of 15 amino acids at the C-terminus of human β-defensin 3 (HBD3-C15) with calcium hydroxide (CH) and Nystatin (Nys) against Candida albicans (C. albicans) biofilm. MATERIALS AND METHODS: C. albicans were grown on cover glass bottom dishes or human dentin disks for 48 hr, and then treated with HBD3-C15 (0, 12.5, 25, 50, 100, 150, 200, and 300 µg/mL), CH (100 µg/mL), and Nys (20 µg/mL) for 7 days at 37℃. On cover glass, live and dead cells in the biomass were measured by the FilmTracer Biofilm viability assay, and observed by confocal laser scanning microscopy (CLSM). On dentin, normal, diminished and ruptured cells were observed by field-emission scanning electron microscopy (FE-SEM). The results were subjected to a two-tailed t-test, a one way analysis variance and a post hoc test at a significance level of p = 0.05. RESULTS: C. albicans survival on dentin was inhibited by HBD3-C15 in a dose-dependent manner. There were fewer aggregations of C. albicans in the groups of Nys and HBD3-C15 (≥ 100 µg/mL). CLSM showed C. albicans survival was reduced by HBD3-C15 in a dose dependent manner. Nys and HBD3-C15 (≥ 100 µg/mL) showed significant fungicidal activity compared to CH group (p < 0.05). CONCLUSIONS: Synthetic HBD3-C15 peptide (≥ 100 µg/mL) and Nys exhibited significantly higher antifungal activity than CH against C. albicans by inhibiting cell survival and biofilm.


Subject(s)
Humans , Amino Acids , Biofilms , Biomass , Calcium Hydroxide , Candida albicans , Cell Survival , Dentin , Glass , Microscopy, Confocal , Microscopy, Electron, Scanning , Nystatin
16.
Tianjin Medical Journal ; (12): 793-795,656, 2016.
Article in Chinese | WPRIM | ID: wpr-604228

ABSTRACT

Objective To observe the efficacy of No. 1 Baiban granules in the treatment of vitiligo using skin confocal laser scanning microscopy. Methods The study was approved by the hospital ethics committee. Nine-two patients with qi stagnation and blood stasis were collected from Department of Dermatology of the Affiliated Hospital of Tianjin Academy of Traditional Chinese Medicine and were randomly assigned to two groups. The experimental group (n=49) received oral Baiban granuleΙ, 3 g, twice a day, transfer factor capsules 6 mg, 3 times a day, 0.1%mometasone furoate cream (excluding the face) for external use, once a day, or 0.1%tacrolimus ointment (Afacial), twice a day for 3 months. The control group (n=43) only received oral transfer factor capsules 6 mg, 3 times a day, 0.1%mometasone furoate cream (except for the face) for external use, once a day, or 0.1%tacrolimus ointment (face), twice a day, treatment for 3 months. The therapeutic effect was observed in two groups. CLSM was used to monitor the compound color and pigment recovery level, and changes of the number of dendritic cells and inflammatory cell infiltration in skin. Results The compound color was improved significantly after treatment in experimental group and control group. The total effective rate was higher in experimental group than that of control group (81.63% vs. 69.77%,χ2=3.947,P<0.05). Results of CLSM observation showed that the pigment recovery of skin lesion, the proportion of dendritic cells and inflammatory cells were significantly higher in experimental group than those of control group (P < 0.05). Conclusion The treatment effect of No. 1 Baiban granules is more obvious for vitiligo of qi stagnation and blood stasis.

17.
Healthcare Informatics Research ; : 238-242, 2016.
Article in English | WPRIM | ID: wpr-177091

ABSTRACT

OBJECTIVES: We produced hematoxylin and eosin (H&E) staining-like color images by using confocal laser scanning microscopy (CLSM), which can obtain the same or more information in comparison to conventional tissue staining. METHODS: We improved images by using several image converting techniques, including morphological methods, color space conversion methods, and segmentation methods. RESULTS: An image obtained after image processing showed coloring very similar to that in images produced by H&E staining, and it is advantageous to conduct analysis through fluorescent dye imaging and microscopy rather than analysis based on single microscopic imaging. CONCLUSIONS: The colors used in CLSM are different from those seen in H&E staining, which is the method most widely used for pathologic diagnosis and is familiar to pathologists. Computer technology can facilitate the conversion of images by CLSM to be very similar to H&E staining images. We believe that the technique used in this study has great potential for application in clinical tissue analysis.


Subject(s)
Diagnosis , Eosine Yellowish-(YS) , Fluorescence , Hematoxylin , Image Processing, Computer-Assisted , Methods , Microscopy , Microscopy, Confocal , Staining and Labeling
18.
Indian J Med Microbiol ; 2015 Jan-Mar ; 33 (1): 101-109
Article in English | IMSEAR | ID: sea-156998

ABSTRACT

Purpose: Different approaches have been used for preventing biofi lm-related infections in health care settings. Many of these methods have their own de-merits, which include chemical-based complications; emergent antibiotic resistant strains, etc. The formation of biofi lm is the hallmark characteristic of Staphylococcus aureus and S. epidermidis infection, which consists of multiple layers of bacteria encased within an exopolysachharide glycocalyx. Nanotechnology may provide the answer to penetrate such biofi lms and reduce biofi lm formation. Therefore, the aim of present study was to demonstrate the biofi lm formation by methicillin resistance S. aureus (MRSA) and methicillin resistance S. epidermidis (MRSE) isolated from wounds by direct visualisation applying tissue culture plate, tube and Congo Red Agar methods. Materials and Methods: The anti-biofi lm activity of AgNPs was investigated by Congo Red, scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) techniques. Results: The minimum inhibitory concentration (MIC) was found to be in the range of 11.25-45 μg/ml. The AgNPs coated surfaces effectively restricted biofi lm formation of the tested bacteria. Double fl uorescent staining (propidium iodide staining to detect bacterial cells and fl uorescein isothiocyanate concanavalin A (Con A-FITC) staining to detect the exopolysachharides matrix) technique using CLSM provides the visual evidence that AgNPs arrested the bacterial growth and prevent the glycocalyx formation. In our study, we could demonstrate the complete anti-biofi lm activity AgNPs at a concentration as low as 50 μg/ml. Conclusions: Our fi ndings suggested that AgNPs can be exploited towards the development of potential anti-bacterial coatings for various biomedical and environmental applications. In the near future, the AgNPs may play major role in the coating of medical devices and treatment of infections caused due to highly antibiotic resistant biofilm.

19.
Rev. Fac. Cienc. Vet ; 55(1): 25-33, jun. 2014. ilus, tab
Article in Spanish | LILACS | ID: lil-740406

ABSTRACT

La tripanosomosis causada por Trypanosoma vivax, se encuentra distribuida en las regiones tropicales y subtropicales de África, América Latina y Asia, causando grandes pérdidas económicas. Los análisis biométricos previos reportan que T. vivax mide entre 18 y 31 µm; sin embargo, pocos estudios de este tipo se han realizado en Venezuela. El objetivo del presente estudio fue describir y comparar la morfometría de cinco aislados de T. vivax, con el propósito de demostrar la variabilidad en el tamaño de los protozoarios obtenidos a partir de bovinos con infecciones activas en diferentes zonas geográficas del país. Para ello, se realizaron infecciones experimentales en ovinos y se tomaron muestras de sangre en el primer pico de parasitemia. Se registraron microfotografías de los estadios hematozoicos (20 micrografías de microscopia electrónica de barrido) de cada aislado para estudios morfológicos. Los resultados revelaron diferencias significativas (p<0,05); (p<0,01) en la longitud entre los aislados. Los valores totales promedios fueron: 20,99 ± 2,10 µm, con variaciones medias entre 18,12 ± 4,42 µm en los de menor tamaño y 24,35 ± 5,55 µm en la mayor longitud, respectivamente. Por lo tanto, se demostró la existencia de variabilidad en el tamaño de estos hemoparásitos de Venezuela.


Trypanosomosis caused by Trypanosoma vivax (T. vivax), is distributed in tropical and subtropical regions of Africa, Latin America and Asia, causing great economic losses. Previous biometric analysis report that T. vivax measures between 18 and 31 µm; but few such studies have been conducted in Venezuela. The aim of this study was to describe and compare the morphometry of five isolates of T. vivax, to demonstrate the variability in size of the protozoa obtained from naturally-infected cattle in different geographical areas of Venezuela. To accomplish this, experimental infections were induced in sheep and blood samples were taken at the first peak of parasitemia. Micrographs of stages of hematozoa (20 micrographs of each specimen using scanning electron microscopy) were recorded for morphological studies. The results of this research revealed significant (p<0.05); (p<0.01) statistical differences in length among them. The total average length was 20.99 ± 2.10 µm, with variations which ranged from 18.12 ± 4.42 µm, for smaller lengths, and 24.35 ± 5.55 µm, for greater lengths, respectively. Therefore, the existence of variability in the size of these hemoparasites in Venezuela was demonstrated.

20.
Braz. dent. j ; 25(4): 295-301, 2014. tab, graf
Article in English | LILACS | ID: lil-722615

ABSTRACT

The aim of this study was to evaluate, by stereomicroscopy and confocal laser microscopy, the influence of different lateral compaction methods for the obturation quality, as well as the time spent for the procedure. Thirty root canals of freshly extracted single-rooted human teeth were prepared with the ProTaper system up to F5 instrument and filled with gutta-percha and AH Plus sealer by the lateral compaction technique. The teeth were divided into 3 groups (n=10) in accordance with the method used for the lateral compaction, as follows: Manual, Mechanical and Ultrasonic. The sealers were stained with rhodamine B dye in a proportion of 0.1% per gram in weight to allow for the analysis under a confocal microscope. During the root filling procedure, the time spent was recorded with a stopwatch. The specimens were stored at 37 °C for 48 h, and then sectioned at 2, 4 and 6 mm from the apex. The percentage of gutta-percha, sealer and void areas were evaluated using a stereomicroscope and sealer penetration perimeter by confocal laser microscope. Statistical analyses were performed using the Kruskall-Wallis and Dunn tests (p<0.05). The mechanical method required a shorter time for the lateral compaction than the manual method (p<0.05). There were no significant differences (p>0.05) for the perimeter of the dentin with sealer penetration among all groups. The mechanical method showed a higher (p<0.05) percentage of gutta-percha and less sealer at the 4 mm section in comparison with the manual method. The ultrasonic group showed intermediate values. The void areas found in the root filling were similar (p>0.05) between the three methods. In conclusion, the fastest lateral compaction was achieved with the mechanical method, and all the methods showed void areas in the root filling.


O objetivo deste estudo foi avaliar a influência de diferentes técnicas de condensação lateral em relação a qualidade da obturação por meio de estereomicroscopia e microscopia confocal, bem com o tempo gasto para realizar o referido procedimento. Trinta canais radiculares de dentes humanos unirradiculares foram modelados com o sistema ProTaper, finalizando com o instrumento F5. Em seguida os canais foram obturados com guta percha e cimento AH Plus por meio da técnica de condensação lateral. Os espécimes foram divididos em 3 grupos (n=10) de acordo com o método de condensação lateral utilizado, sendo: Manual, Mecânico, Ultrassônico. Os cimentos foram manipulados com rodamina B na proporção de 0.1% de peso para permitir a análise com microscopia confocal. O tempo gasto para realizar cada procedimento de obturação foi registrado com o uso de um cronômetro. Os espécimes foram armazenados a 37 °C durante 48 h, para em seguida serem seccionados a 2, 4 e 6 mm a partir do ápice radicular. A porcentagem da área de guta percha, cimento e vazios foram avaliados com estereomicroscópio. A penetração de cimento foi avaliada por meio de microscópio confocal. A análise estatística foi realizada utilizando os testes de Kruskall-Wallis e Dunn (P < 0.05). O método mecânico exigiu menos tempo para realizar a condensação lateral em comparação com o método manual (p<0.05). Não foi encontrada diferença (p>0.05) em relação ao perímetro de penetração de cimento nos túbulos dentinários entre todos os grupos avaliados. O método mecânico apresentou maior (p<0.05) porcentagem de guta percha e menos cimento no nível de 4 mm quando comparado com o método manual. O grupo do ultrassom apresentou resultados intermediários. Áreas de vazios encontradas foram similares (p>0.05) entre os grupos. Foi possível concluir que o método mecânico foi mais rápido para a técnica de condensação lateral, mas todos os métodos de obturação estudados apresentaram espaços vazios na massa obturadora.


Subject(s)
Humans , Root Canal Preparation
SELECTION OF CITATIONS
SEARCH DETAIL