Desenvolvimento e caracterização fisico-química de um selante resinoso com propriedades antimicrobianas associadas à incorporação do extrato do caule de Schinopsis brasiliensis (Braúna) / Development and physicochemical characterization of a resinous sealant with antimicrobial properties associated with the incorporation of Schinopsis brasiliensis (Braúna) stem extract

Introdução: os selantes resinosos possuem atividade preventiva e terapêutica da cárie dentária oclusal através da criação de uma barreira física que impede a adesão de biofilme. Não existem relatos destes materiais com propriedades antimicrobianas e, neste ensejo, a adição de princípios ativos obtidos de fitoterápicos configura como uma opção possível para resolver esta limitação. Objetivos: avaliar o potencial antimicrobiano do selante Fluroshield® enriquecido com o extrato do caule de Schinopsis brasiliensis (Braúna), bem como, a liberação do princípio ativo, grau de conversão, resistência de união imediata ao esmalte e padrão de falha dos materiais experimentais. Metodologia: trata-se de um estudo experimental in vitro. As cascas da Braúna foram secas a 40 ± 1 °C e o extrato etanólico foi obtido por percolação do pó da casca da Schinopsis brasiliensis. O selante comercial Fluroshield® (Dentsply) foi enriquecido com as proporções em massa (g) [0% (Controle), 20%, 10%, 5%, 2,5% e 1,25%]. Foi realizada a avaliação da Atividade antimicrobiana, a liberação do princípio ativo foi aferida através de Ultra Cromatografia Líquida de Alta Performance (UHPLC), o grau de conversão (GC) através do Micro-Raman, a resistência de união (RU) imediata ao esmalte foi avaliada através do microcisalhamento e padrão de fratura através de análise em estereomicroscópio. Os valores finais foram submetidos aos testes de normalidade Shapiro-Wilky (p > 0,05) e Levene. Os dados paramétricos foram submetidos a análise de variância (ANOVA one-way) com pós-teste de Tukey (p <0,05) e os não paramétricos através do teste de Kruskal-Wallis com pós-teste de Dunn's através do software GraphPad Prism 8 e Microsoft Excel 2018. Resultados: materiais com maior % de extrato apresentaram menor GC, não houve diferença estatisticamente significativa para RU entre os diferentes grupos, o padrão de fratura predominante foi adesiva, houve liberação do princípio ativo em meio aquoso em todos os materiais e os grupos com 20% e 10% de extrato em massa foram capazes de inibir a formação de biofilme de maneira semelhante ao controle positivo (clorexidina 0,12%). Conclusão: a adição do extrato de Schinopsis brasiliensis em concentrações entre 10% e 20% apresenta-se como uma alternativa promissora para a obtenção de propriedades antimicrobianas em selantes resinosos (AU).

Introduction: dental sealants have a preventive and therapeutic activity in the prevention and treatment of dental caries. However, there are no reports of these materials with antimicrobial properties and the addition of phytotherapy molecules would be an option to solve this limitation. Objectives: to evaluate the antimicrobial properties of the Fluroshield™ sealant with the addition of the stem extract of Schinopsis brasiliensis (Braúna), as well as the potential for releasing the active ingredient, degree of conversion and immediate enamel bond strength. Methodology: this is an experimental in vitro study. Braúna barks were dried at 40 ± 1 °C and the ethanolic extract was obtained by percolation of Schinopsis brasiliensis bark powder. The commercial sealant Fluroshield™ was enriched with the proportions by mass (g) [0% (Control), 20%, 10%, 5%, 2.5% and 1.25%]. The evaluation of the Inhibition of Biofilm Formation was carried out, the release of the active principle was measured with Ultra High Performance Liquid Chromatography (UHPLC), the immediate bond strength (BS) to the dental tissue was evaluated with microshear and the degree of conversion (DC) with Micro-Raman. Final values were submitted to Shapiro-Wilky (p > 0.05) and Levene normality tests. Parametric data were submitted to analysis of variance (one-way ANOVA) with Tukey's post-test (p <0.05) and nonparametric data through the Kruskal-Wallis test with Dunn's post-test using the GraphPad Prism software 8 and Microsoft Excel 2018. Results: materials with a higher % of extract had a lower DC, there was no statistically significant difference for BS between the different groups, there was release of the active principle in all materials and groups with 20% and 10 % of extract by mass were able to inhibit biofilm formation similarly to the positive control (0.12% chlorhexidine). Conclusion: the addition of Schinopsis brasiliensis extract in concentrations between 10% and 20% is a promising alternative for obtaining antimicrobial properties in resin sealants (AU).

Physicomechanical Properties of Resin-Based Pit and Fissure Sealants Reinforced with Rice Husk Derived Nano Silica and Nanohydroxyapatite

@#Resin-based pit fissure sealants (RBS) are used to prevent occlusal caries in children. The success of RBS in preventing dental caries is largely influenced by its retention on the tooth surface, which is also affected by its physicomechanical properties. The physicomechanical properties of RBS can be enhanced through the addition of fillers. With the advent of nanofillers, the physicomechanical properties were improved without altering RBS flowability. The present study developed an RBS with a 70 wt% resin matrix and 30 wt% nanofillers. The resin matrix consisted of urethane dimethacrylate (55 wt%), triethylene glycol dimethacrylate (45 wt%), camphoroquinone (0.3 wt%), and 2-(dimethylamino) ethyl methacrylate (0.7 wt%). Silane-treated rice husk-derived nanosilica (20 wt%) and nanohydroxyapatite (10 wt%) were added as fillers. Clinpro, Fissurit FX, and an unfilled sealant were controls. All RBS were tested for surface roughness, Vickers hardness, flexural strength, and flowability. Statistical analysis with oneway ANOVA revealed significant differences between groups in surface roughness, hardness, flowability (p < 0.001), flexural strength, and flexural modulus (p < 0.05). Experimental sealants had higher flexural strength (78 MPa) and flow distance (29.05+1.16 mm) than commercial controls.However, the surface roughness of experimental sealants (0.25+0.08 μm) was higher than Clinpro (0.087+0.027 μm) but lesser than Fissurit FX (0.35+0.19 μm). The Vickers hardness of experimental sealants (23+1.63 VHN) was less than Fissurit FX (28.80+1.69 VHN) but higher than Clinpro (21.74+1.68 VHN). This novel RBS had physicomechanical properties comparable to commercial sealants. The use of nanosilica from rice husk makes this pit and fissure sealer sustainable and environmentally friendly in dentistry.

Análise comparativa das características composicionais, técnicas e comerciais dos cimentos endodônticos obturadores à base de silicato de cálcio / Comparative analysis of compositional, technical and commercial characteristics of calcium silicate-based endodontic root canal sealers

Introdução: os cimentos endodônticos obturadores à base de silicato de cálcio têm sido amplamente utilizados na endodontia, principalmente em razão de suas reconhecidas propriedades bioativas. Como consequência, uma quantidade expressiva de marcas comerciais foi lançada no mercado, dificultando a compreensão do profissional, principalmente no que diz respeito às diferentes composições químicas, apresentações, formas de uso e custo-benefício. Objetivos: o Objetivo deste trabalho foi analisar as diferenças composicionais, técnicas (indicações e apresentação comercial) e comerciais (custo e disponibilidade de venda) dos cimentos endodônticos obturadores à base de silicato de cálcio, disponíveis para uso e comercialização no Brasil. Metodologia: foi realizada uma busca sistemática no site da Anvisa, sendo identificados sete cimentos endodônticos obturadores biocerâmicos para uso no Brasil. As bulas dos produtos foram analisadas para verificação de composição, apresentação e indicação de uso. Sites especializados foram consultados para verificação de preço dos produtos. Resultados: observou-se que a composição química varia bastante, a depender do fabricante, sendo os silicatos tricálcico e dicálcico os componentes mais frequentes. A maioria dos cimentos é apresentada comercialmente pronta para uso, e possui óxido de zircônio como agente radiopacificador. A venda através de sites especializados ainda é restrita a alguns produtos, e o custo varia de acordo com a quantidade de material por embalagem. Conclusão: este trabalho apresentou as características composicionais, técnicas e comerciais de sete cimentos endodônticos obturadores à base de silicato de cálcio registrados na ANVISA e autorizados para uso no Brasil.

Introduction: calcium silicate-based endodontic sealers have been widely used in endodontics, mainly because of their recognized bioactive properties. As a result, a significant number of commercial brands were launched on the market, making it difficult for professionals their comprehension, especially with regard to different chemical compositions, presentations, forms of use and cost-effectiveness. Objective: the Objective of this work was to analyze the compositional, technical (indications and commercial presentation) and commercial (cost and availability) differences of calcium silicate-based endodontic sealers, available for use and commercialization in Brazil. Methodology: a systematic search was carried out on the Anvisa website, and seven bioceramic endodontic sealers for use in Brazil were identified. Product leaflets were analyzed to verify composition, presentation and indication of use. Specialized websites were consulted to verify the price of the products. Results: it was observed that the chemical composition varies a lot, depending on the manufacturer, with tricalcium and dicalcium silicates being the most frequent components. Most sealers are commercially available ready-to-use, and have zirconium oxide as a radiopacifying agent. The sale through specialized websites is still restricted to some products, and the cost varies according to the amount of material per package. Conclusion: this work presented the compositional, technical and commercial characteristics of seven calcium silicate-based endodontic sealers registered at ANVISA and authorized for use in Brazil.

Bioactivity and biocompatibility of bioceramic sealers in endodontics: an integrative review

Introduction: Bioceramic sealers have been gaining prominence in endodontics, meaning a great advance for endodontic therapy, mainly due to their biocompatibility and bioactivity. Objectives: research and discuss the literature about the bioactivity and biocompatibility of bioceramic sealants. Materials and methods: An integrative review was performed. The systematic plan consisted of four steps. In the first stage, a bibliographic survey was carried out in the Capes Periódicos Portal database. The search criteria were articles published between 2017 and 2022, found in the "advanced search" mode, using cross-references with the following keywords: bioceramics sealers AND endodontology AND root canals AND endodontic sealer AND bioactivity AND biocompatibility. Only documents found and published in full were evaluated. In the second stage, the titles and abstracts of the articles were read. In the third stage, a selection was made of those containing 3 to 5 keywords and a wording equal to or close to the proposed keywords. The fourth step consisted of reading the texts in full, followed by checking for duplicity and building a table with the collected information. Results: In view of the research carried out, 23 articles were obtained in the first stage. After reading the titles and abstracts, 21 articles were obtained. After selecting those containing 3 to 5 keywords, 10 articles met the criteria. One article was deleted due to duplicates. 9 articles met the exclusion and inclusion criteria and were selected to be part of the integrative review. Discussion: The selected studies in this literature review showed that bioceramic endodontic sealants perform well in endodontic therapy. Conclusion: To advance in its clinical application, more in vivo and in vitro studies with precise methods are needed to obtain more reliable data about its properties.

Assessment of influence of LED curing units used on microhardness of resin-modified glass ionomer sealants

Aim: Resin modified glass ionomer (RMGI) is class of material that can be used as sealant for preventing and arresting the progression of caries in pits and fissures. As these are hybrid materials, their properties can be affected by factors related to the polymerization process. Therefore, this study aimed to evaluate the influence of different generations of LED curing units (Elipar DeepCure-L and VALO Grand) on Knoop microhardness values (KHN) of RMGI sealants (Clinpro XT and Vitremer). Methods: Forty cylindrical specimens (6mm ø x 1 mm high) were prepared according to the manufacturer's instructions and divided into four groups (n=10) according to the type of RMGI and LED used. The KHN of the top surface of each sample was calculated 7 days after light-curing. Data were submitted to two-way ANOVA (α = 0.05). Results: Vitremer had higher KHN values than Clinpro XT after using both LEDs (p<0.0001), but especially when light-cured with the use of VALO Grand (p<0.0001). Whereas the KHN value of Clinpro was not influenced by the LED device (p>0.05). Conclusions: Top surface microhardness values of RGMI sealants were affected by both material composition and generations of LED curing units used. Third generation LED curing units seemed to be more efficient for the polymerization of RMGI-based sealants

Repeated use of fibrin sealants kept at room temperature in conjunctival autografting: An animal study

Purpose: In this study, our aim was to investigate if fibrin adhesives used in conjunctival wound surgery with autologous conjunctival grafts could be used repeatedly at different times after surgical opening. Methods: 40 New Zealand rabbits were used in the study. These animals were divided into four groups, each consisting of 10 rabbits, and hence 20 eyes. In the first group (control group), Tisseel fibrin sealant was used on the day the eye was first opened surgically; in the second group, it was used on the seventh day; on the third group, it was used on the 14th day; and in the fourth group, it was used 28 days after surgical opening. The graft from the inferior bulbar conjunctiva was attached using Tisseel fibrin glue to the superior scleral bed at the location where the superior bulbar conjunctiva was excised in the same eye. Results: No microbial growth was detected in the cultures of the samples tested. There were two partial graft loss in group 2 and there was one partial graft loss in each group of the other groups, and further total graft loss was present in one rabbit in group 3. None of the rabbits had any complications like granuloma, Corneal dellen or infection. Conclusion: Based on these results, fibrin sealants can be used repeatedly by storing them at room temperature. Repeated use of fibrin adhesives will reduce the cost of ophthalmologic surgeries and non?ophthalmologic surgeries

Effect of Saliva/Blood Contamination on Enamel Bond Strength / Efeito da Contaminação de Saliva/Sangue na Força de União ao Esmalte

Abstract In the routine clinical situation, the contamination by blood and/or saliva in restorative procedures can be happen in non-cooperation of the patient in dental office. The aim of the study was to assess in vitro shear bond strength of a resin sealant associated with two types of adhesives contaminated with saliva and blood. Healthy human molars were used and the specimens and the crowns were sectioned in the bucco-lingual direction, thus obtaining two segments of similar proportions (mesial and distal), totaling 60 surfaces, and the surfaces were randomly divided into 4 groups (n = 15). Group I (control) received no type of contamination and the sealant was applied. In group II, the surfaces were contaminated with 10 µl of saliva/blood and the sealant was applied. In group III, the surfaces were contaminated with 10 µl of saliva/blood and the Single Bond total-etch adhesive system was applied followed by application of sealant. In group IV, the surfaces were contaminated with 10 µl of saliva/blood and the Prime & Bond NT total-etch adhesive system was applied followed by the application of sealant. Samples were tested in the universal testing machine and the analysis of shear bond strength was performed. A difference between Group I (12.61MPa) and the other groups was found; Group II (2. 28MPa) was different than Groups III (7.07MPa) and IV (7.79MPa), but Groups III and IV were similar. The application of an adhesive system when there is contamination with saliva/blood is required prior to application of pit and fissure sealants. (AU)

Resumo Na situação clínica de rotina, a contaminação por sangue e/ou saliva em procedimentos restauradores pode ocorrer em pacientes que não colaboram no consultório odontológico. O objetivo do estudo foi avaliar a resistência ao cisalhamento in vitro de um selante de resina associado a dois tipos de adesivos contaminados com saliva e sangue. Foram utilizados molares humanos saudáveis e os espécimes e as coroas foram seccionados na direção bucal-lingual, obtendo assim dois segmentos de proporções semelhantes (mesial e distal), totalizando 60 superfícies, e as superfícies foram divididas aleatoriamente em 4 grupos (n = 15). O Grupo I (controle) não recebeu nenhum tipo de contaminação e o selante foi aplicado. No grupo II, as superfícies foram contaminadas com 10 µl de saliva / sangue e o selante foi aplicado. No grupo III, as superfícies foram contaminadas com 10 µl de saliva / sangue e o sistema adesivo Single-Bond foi aplicado seguindo a aplicação de selante. No grupo IV, as superfícies foram contaminadas com 10 µl de saliva / sangue e o sistema adesivo de ataque total Prime & Bond NT foi aplicado seguido da aplicação de vedante. As amostras foram testadas na máquina de ensaio universal e a análise da resistência à ligação ao cisalhamento foi realizada. Uma diferença entre o Grupo I (12,61MPa) e os outros grupos foi encontrada; O Grupo II (2,28 MPa) foi diferente dos Grupos III (7,07MPa) e IV (7,79 MPa), mas os Grupos III e IV foram semelhantes. A aplicação de um sistema adesivo quando existe contaminação com saliva / sangue é necessária antes da aplicação de selantes de fissura e fissura.

Pit and fissure depth in the enamel of mandibular third molars / Profundidad de fosas y fisuras en el esmalte de terceros molares inferiores

ABSTRACT The aim of this descriptive ex vivo study was to evaluate qualitatively the depth of pit and fissures (P&F) of the enamel in human mandibular third molars. Fifty (n=50) extracted human mandibular third molars were cleaned and disinfected. All tooth surfaces were coated with nail varnish except for a 1-mm margin around the periphery of the occlusal surface. The teeth were immersed for 48 hours at 37 °C in 1% methylene blue dye solution prepared in artificial saliva. After cleaning, the crowns were separated from the root at the cementoenamel junction and subsequently sectioned longitudinally in buccolingual direction at the location of the central fossa. All sections were examined using a stereoscopic microscope and photographed. The images were downloaded on a computer. The length of penetration of the P&F was recorded using the following scoring system: C1: P&F extended to half of the enamel thickness; C2: P&F extended beyond half of the enamel thickness without reaching the dentine-enamel junction; C3: P&F extended to the dentine-enamel junction. For pits, C1, C2 and C3 were observed in 35, 9 and 6 teeth, respectively, while for fissures, C1, C2 and C3 were observed in 15, 18 and 17 teeth, respectively. The P&F detected in the samples extended to the deepest portions of enamel, quite frequently reaching the enamel-dentine junction. Clinicians should recognize that even if pits and fissures are not clinically obvious, they penetrate deep into the enamel and frequently reach the dentine-enamel junction. Effective treatment is recommended to block access to P&F, thus preventing ingress of bacteria.

RESUMEN Objetivos: El objetivo del presente estudio descriptivo fue evaluar cualitativamente mediante un ensayo ex vivo la profundidad de las fosas y fisuras (F&F) del esmalte en terceros molares inferiores humanos. Materiales y métodos: Cincuenta (n=50) terceros molares inferiores sanos extraídos se lavaron, se descontaminaron y se recubrieron con esmalte para uñas hasta 1 mm menos del área de las F&F. Luego se sumergieron durante 48 horas a 37°C en una solución de azul de metileno al 1% (pH 7,4) preparada con saliva artificial. Posteriormente se lavaron y se separaron las coronas a nivel del límite amelocementario. En cada molar se realizó una sección longitudinal de 1 mm de espesor con orientación vestíbulo-lingual a nivel de la fosa central. Las secciones fueron analizadas con microscopio estereoscópico y fotografiadas. Las imágenes se transfirieron a una computadora. Se determinó cualitativamente la extensión de las F&F en el espesor del esmalte y se las clasificó de acuerdo a 3 categorías. C1: extensión hasta la mitad del espesor del esmalte; C2: extensión que supera la mitad del espesor del esmalte sin afectar el límite amelodentinario; C3: extensión que llega al límite amelodentinario. Resultados: Para las fosas, 35, 9 y 6 especimenes correspondieron a las categorías C1, C2 y C3 respectivamente. Para las fisuras, 15, 18 y 17 especimenes correspondieron a las categorías C1, C2 y C3 respectivamente. Conclusiones: Las fosas y fisuras de la muestra analizada se extienden hasta la zona más profunda del espesor del esmalte. Con cierta frecuencia llegan hasta el límite amelodentinario.

¿Cómo Intervenir el Proceso de Caries en Adultos? Adaptación del Consenso de ORCA/EFCD/DGZ / How to Intervene the Caries Process in Adults? Adaptation of the ORCA/EFCD/DGZ Consensus

RESUMEN: El manejo terapéutico de lesiones de caries primarias y secundarias concentra gran parte del quehacer de los dentistas en el mundo. Recientes cambios en la concepción de la enfermedad de caries llevaron a un panel de expertos de la Organización Europea para la Investigación en Caries (ORCA), la Federación Europea de Odontología Conservadora (EFCD) y la Federación Alemana de Odontología Conservadora (DGZ) a analizar la evidencia y consensuar recomendaciones sobre manejo de caries en adultos. Mediante una reunión en Berlín, Alemania en 2019 y con metodología e-Delphi, los expertos analizaron la evidencia y propusieron recomendaciones clínicas. El propósito de este artículo es presentar una adaptación idiomática de las principales recomendaciones, que incluyen terapias no invasivas (higiene, uso de fluoruros y control de dieta), terapias microinvasiva (sellantes e infiltrantes), terapias necesariamente invasivas y la reparación de restauraciones. Todas las recomendaciones se basan en un enfoque mínimamente invasivo, con un adecuado manejo restaurador. Los dentistas de países hispanoparlantes podrán encontrar recomendaciones basadas en evidencia, provenientes de un consenso de expertos a nivel global, que orienten sus decisiones clínicas, apoyándose en los principios de la odontología de mínima intervención.

ABSTRACT: Therapeutic management of primary and secondary caries lesions concentrates much of the work of dentists throughout the world. Recent changes in caries disease conception and therapeutic management led a panel of experts from the European Organisation for Caries Research (ORCA), the European Federation for Conservative Dentistry (EFCD) and the German Federation for Conservative Dentistry (DGZ) to analyze the evidence and reach consensus on recommendations for caries management in adults. Through a meeting held in Berlin, Germany in 2019 and using an e-Delphi methodology, the experts analyzed the evidence and proposed clinical recommendations. The purpose of this article is to present an idiomatic adaptation to Spanish of the main recommendations, which include non-invasive therapies (hygiene, use of fluoride and diet control), microinvasive therapies (sealants and infiltrants), invasive therapies and repair of restorations. All recommendations are based on a minimally invasive dentistry approach, with a technically adequate restorative management. Spanish-speaking dentists may use these consensus recommendations to guide their clinical decisions, based on the most recent evidence and experts opinions, under the principles of minimal intervention dentistry.

Clinical evaluation of hydrophobic and hydrophilic pit and fissure sealants among 7-10 year old school children: a split mouth study design / Avaliação clínica de fóssulas e físsuras com selantes hidrofóbicos e hidrofílicos entre crianças de 7 a 10 anos de idade: estudo intervencional

Introdução: O estudo foi realizado para comparar a eficácia da retenção hidrofóbica e hidrofílica de selante de fóssulas e fissuras entre crianças de 7 a 10 anos de idade escolar. Material e métodos: O presente estudo randomizado de boca dividida foi realizado nas superfícies oclusais dos primeiros molares inferiores permanentes para comparação e avaliação da retenção junto com outras variáveis de resultado, como a cor, descoloração marginal, adaptação marginal, forma anatômica, sensibilidade pós-operatória, formação de cárie e rugosidade de superfícia de selantes hidrofóbicos e hidrofílicos de fóssulas e fissuras no 3º e 6º mês de aplicação. Os dados foram analisados usando o software SPSS e os resultados foram obtidos. Resultados: No presente estudo, entre as 50 restaurações com selantes hidrofóbico de fóssulas e fissuras (Grupo I), 48 (96%) das restaurações ficaram retidas no final do terceiro mês e 45 (90%) ficaram retidas no final do sexto mês. Entre as 50 restaurações nos selantes de fóssulas e fissuras hidrofílicas (Grupo II), 49 (98%) restaurações ficaram retidas no final do terceiro mês e 46 (92%) no final do sexto mês ficaram retidas. Não houve diferença significativa no número de restaurações totalmente retidas ao final de seis meses (p = 1,00) entre os dois grupos. A avaliação de todas as outras variáveis entre as duas intervenções mostrou que a diferença não foi estatisticamente significativa. Conclusão: O estudo concluiu que o selante de fóssulas e fissuras hidrofílico era semelhante ao selante de fóssulas e fissuras hidrofóbicas em termos de retenção, combinação de cor, descoloração marginal, adaptação marginal, forma anatômica e rugosidade de superfície. (AU)

Introduction: The study was done to compare the effectiveness of hydrophobic and hydrophilic pit and fissure sealant retention among 7-10 year old school children. Material and Methods: The present split mouth randomized trial was conducted on the occlusal surfaces of permanent first mandibular molars to compare and assess the retention along with other outcome variables like colour match, marginal discolouration, marginal adaptation, anatomic form, post-operative sensitivity, caries formation and surface roughness properties of Hydrophobic and Hydrophilic pit and fissure sealants at 3rdand 6th month. The data was compiled and analyzed using SPSS software and results were generated. Results: In the present study among the 50 restorations in the hydrophobic pit and fissure sealants (Group I), 48 (96%) restorations were retained at the end of third month and 45(90%) were retained at the end of sixth month. Among the 50 restorations in the hydrophilic pit and fissure sealants (Group II), 49(98%) restorations were retained at the end of third month, and 46(92%) at the end of sixth month were retained. There was no significant difference in the number of completely retained restorations at the end of six months (p = 1.00) among both the groups. The assessment of all the other outcome variables between both the interventions showed that the difference was not statistically significant. Conclusion: The study concluded that the hydrophilic pit and fissure sealant was similar to the hydrophobic pit and fissure sealant in terms of retention, colour match, marginal discolouration, marginal adaptation, anatomic form and surface roughness properties with (AU)

Comparative Evaluation of Three Different Pit and Fissure Sealants

Introduction: Dental caries is an infectious mulifactorialdisease which can affect any tooth in the oral cavity. Assuch it is important to protect them from becoming carious.Resin sealant methods developed by Bowen in 1962 stillcontinue to form the basis of presently available sealants. Animportant factor for sealant success is its marginal integrityand retention. Hence this study was undertaken to assessthe retention and marginal discoloration of conventionalpit and fissure sealants, Glass ionomer sealant type VII andHelioseal-F. Study aimed to assess the retention and marginaldiscoloration of conventional pit and fissure sealants, glassionomer sealant type VII and helioseal -F.Material and methods: This study was conducted in a privatedental clinic in Bangalore from 2015 to 2016. Thirty childrenaged 6 to 8 years were selected. The children were divided into3 groups of 10 children each. First group, ortho Phosphoricacid etchant gel was applied with a disposable nylon applicatortip on to the pit and fissures. Conventional light-cured resinbased p.it-and-fissure sealant (Clinpro™ Sealant (3M ESPE)was cured with the light curing unit for 20 seconds. Secondgroup (Group II): Fuji VII cement was mixed according tomanufacturer’s instructions and applied to the occlusal surfaceusing a plastic-filling instrument and a disposable nylon brushto spread it into the pits and fissures. Third Group (Group III):Etching was done with 37% phosphoric acid for 20 seconds.Using the syringe needle tip, Helioseal F sealant was flowedinto the fissures for 20 seconds. First follow up examinationwas done at 3 months recall by using visual and tactileexamination. The sealants were examined for their integrity,retention and marginal discoloration. The data was obtainedat 3 months and 6 months intervals. The teeth were visuallyinspected for caries.Results: At 3-month evaluation 89.7% of retention was seenfor conventional resin sealant, 72.7% retention for HeliosealF and 65.3% for Glass ionomer sealant. At 6month followup 73.3% retention was seen for conventional resin sealant,52.4% retention for Helioseal F and 34.9% for Glass ionomersealant. There was no significant difference in terms ofmarginal discoloration between conventional resin sealantand helioseal F. However glass ionomer sealant showed asignificant marginal discoloration as compared to heliosealF. No significant differe-nce was seen in the development ofcaries between the three groups.Conclusion: Conventional sealants are better sealants withrespect to retention

Three-year effect evaluation of pit-and-fissure sealing of the first permanent molars in Henan provincial children / 中国学校卫生

Objective@#To examine the retention rate and caries prevention effect of fit-and-fissure sealants after 3 years of children oral disease comprehensive intervention program in Henan province.@*Methods@#For each of the five provincial regions attending the program in 2015, two classes from grade 2 in four primary schools were selected. Children in two schools were assigned into intervention group and the first permanent molars which were appriopriate for sealing were sealed with pit-and-fissure sealants. Children in other two schools were included in the control group and the first permanent molars were only examined for caries conditions. Three years later, retention rate of pit-and-fissure sealants and the dental caries prevalence was compared.@*Results@#Complete retention rate of sealants in the first permanent molars was 65.55% and the whole retention rate was 94.78%. The caries incidence and mean value of the first permanent molars in the intervention group children was 9.71%, (0.12±0.40) respectively whereas those in control group was 21.90%, (0.39±0.78) respectively. The differences between two groups were statistically significant(χ2/t=27.76, 6.91, P<0.01). The relatively effective rate of sealing for caries reduction was 63.43% and the actural effective rate was 6.51% and the pure yield rate of sealing was 12.19%. Higher sealant retention rate was associated caries prevalence(χ2=153.28, P<0.01).@*Conclusion@#Childhood oral disease intervention project in Henan Province shows positive effects. Sealing of the first permanent molars effectively prevent dental pit and fissure caries.

Quality of the pit and fissure sealant program for children in Xi'an from 2010 to 2018 / 中国学校卫生

Objective@#To analyze the quality of the first permanent molars pit and fissure sealant for school-aged children in Xi'an from 2010 to 2018, and to provide a reference for preventing dental caries.@*Methods@#A total of 5 871 children were selected from different regions from 2010 to 2018 by cluster random sampling method for the quality inspection of pit and fissure sealant.@*Results@#The quality of pit and fissure sealant has been improved by year in Xi'an ( χ 2=1 326.39, P <0.01). The rate of intact sealant was 92.57% in 2018. The quality of project and reservation rate in rural areas(64.23%, 76.83%) were worse than those in urban (84.17%, 90.80%) and suburban areas(84.21%, 91.88%)( χ 2=310.58, 296.52, P <0.01); The quality of pit and fissure sealant was highest in tertiary hospitals(87.28%, 91.07%), followed by private hospitals(84.60%, 91.43%), primary hospitals(84.42%, 92.02%), secondary hospitals(72.79%, 84.45%)( P <0.01).@*Conclusion@#The quality of pit and fissure sealant in Xi'an reached the national requirement, but there is obvious gap between town and country, the quality of project varied substantially across medical institutions .Training and supervision should be strengthened in the future work.

O uso de selantes de fossas e fissuras no tratamento de lesões cariosas cavitadas: uma revisão de literatura / The use of pits and fissures sealants in the treatment of cavitated carious injuries: a literature review

Introdução: Os selantes são considerados uma opção terapêutica minimamente invasiva no tratamento de lesões cariosas limitadas à metade externa da dentina. Nesta técnica, o tecido cariado é mantido coberto com um selante, promovendo a paralisação da lesão. Objetivo: analisar a utilização de selantes no tratamento de lesões de cárie, a sua eficácia, qual tipo de material é o mais ideal para essa finalidade e observar se essa terapêutica é a mais indicada para tratar lesões cariosas já cavitadas. Métodos: uma revisão da literatura foi realizada por meio de artigos científicos publicados nos últimos cinco anos (2015-2020) presentes em bases de dados eletrônicos, como PubMED/Medline, Lilacs e BBO. Resultados e discussão: a utilização dos selantes, antigamente, era apenas voltada para a prevenção, porém houve uma progressão nesse entendimento, passando a ser utilizado no tratamento de lesões cariosas que apresentam microcavidades oclusais de até três milímetros de perda da integridade superficial. Neste trabalho, todos os estudos descritos afirmaram que essa técnica é eficaz em paralisar o processo carioso, sendo indicada, principalmente, para crianças, pois reduz o tempo clínico e gera menos ansiedade. Em relação ao tipo de selante mais indicado para essa finalidade, as evidências científicas ainda são inconclusivas. Conclusão: o uso de selantes é um método eficiente na interrupção da lesão cariosa, porém depende da adequada retenção do material e da colaboração do paciente em continuar o acompanhamento pelo profissional. Além disso, é necessária a realização de estudos mais criteriosos que comparem os tipos de selantes e indiquem a opção mais adequada para obter o melhor selamento das lesões cavitadas.

Introduction: Sealants are considered a minimally invasive therapeutic option in the treatment of carious lesions limited to the outer half of the dentin. In this technique, the decayed tissue is kept covered with a sealant, promoting the paralysis of the lesion. Objective: to analyze the use of sealants in the treatment of caries lesions, their effectiveness, what type of material is most ideal for this purpose and observe whether this therapy is the most suitable for treating carious lesions already cavitated. Methods: a literature review was carried out through scientific articles published in the last five years (2015-2020) submitted to electronic databases, such as PubMED / Medline, Lilacs and BBO. Results and discussion: the use of sealants, in the past, was only aimed at prevention; however there was a progression in this understanding, being used in the treatment of carious lesions that present occlusal microcavities of up to three millimeters of surface integrity loss. In this research, all the studies described stated that this technique is effective in paralyzing the carious process, being indicated, mainly, for children, because it reduces the clinical time and generates less anxiety. Regarding the type of sealant most suitable for this purpose, the scientific evidence is still inconclusive. Conclusion: the use of sealants is an efficient method to interrupt the carious lesion; however, it depends on the adequate retention of the material and on the patient's collaboration in continuing the follow-up by the professional. In addition, it is necessary to carry out more careful studies that compare the types of sealants and indicate the most appropriate option to obtain the best sealing of cavitated lesions.

Clinical Evaluation of Pit and Fissure Sealants Placed by Undergraduate Dental Students in 5-15 Years-old Children in Iraq

Abstract Objective: To clinically evaluate the retention and marginal discoloration of pit and fissure sealants applied to primary and permanent teeth. Material and Methods: The study population encompassed of 5-15 years-old children. After consenting, a light-curing sealant was applied to etched pits and fissures of occlusal surfaces of selected sound teeth. The retention rate and marginal discoloration were assessed, 3 months after application of the sealants based on the criteria proposed by Simonsen's criteria (total retention: score 0, partial loss: score 1, and total loss: score 2). Each tooth was considered as an independent sample during analysis. Results: The achieved sample size was 43 children aged 5-15 years (mean age=10.0 years). Therefore, data of 100 teeth from 43 children were used for the final analysis. The percentage of completely retained sealants (59%) was higher than the percentage of partially retained sealants (23%) and completely missing sealants (18%) after 3 months follow up. Out of 100 sealed teeth, 60% were either had marginal discoloration or completely missing. Using the Mann-Whitney test, there was a statistically significant difference (p<0.05) between primary and permanent teeth in terms of retention. However, there was no statistical difference (p>0.05) between upper and lower teeth in terms of retention. Conclusion: The success rate of fissure sealants after 3 months follow-up was satisfactory.

Sealing Carious Fissures with Resin Infiltrant in Association with a Flowable Composite Reduces Immediate Microleakage?

Abstract Objective: To compare the immediate microleakage of carious fissures sealed with a caries infiltrant covered by a flowable composite or solely with a flowable composite. Material and Methods: Extracted carious molars (n=20) were selected and paired among the experimental groups according to caries progression scores. Experimental groups (n=10) were divided according to the following sealing techniques: 1) caries infiltrant (Icon) + flowable composite (Z350 flow); 2) flowable composite (Z350 flow). Specimens were immersed in 3% methylene blue and evaluated in a stereomicroscope. Microleakage scores were attributed independently by two calibrated evaluators and the mode value was considered as the mean for the specimen. Binomial tests were used to test differences between two independent sample proportions at 5% significance level. Results: In the flowable composite group, a higher prevalence of dye penetration along the full depth of the fissure was observed, compared with caries infiltrant + flowable composite (p<0.05). For specimens showing dye penetration up to half of the fissure, in caries infiltrant + flowable composite group, all specimens showed dye penetration into the sealant, but not over the infiltrant. Conclusion: Using caries infiltrant as sealing material under a flowable composite cover is effective to improve the immediate sealing ability in carious fissures compared to sealing with flowable composite.

Alternative of Lower-Cost Glass-Ionomer Sealant in the Prevention of Caries Lesions in Brazilian Children

Objective: To compare retention, preventive effectiveness and longevity of two different highviscosity glass-ionomer sealants Ketac Molar® and Maxxion R® in the sealing of erupting and out-of-occlusion first permanent molar in children aged 5-7 years. Material and Methods: Children with past caries experience with healthy erupting first permanent molar were included in the study. Teeth 16 and 46 were sealed with Ketac Molar® and teeth 26 and 36 were sealed with Maxxion R®. After 8 months, the retention of sealants was evaluated using the following criteria: total retention; presence of sealant in two thirds of the occlusal surface; presence of sealant in one third of the surface; and total absence of the sealant. Results: Statistical difference between materials was observed, and Ketac Molar® retention was superior to that of Maxxion R® (p<0.05). Regarding the development of caries in sealed first permanent molar, none of the teeth sealed with Ketac Molar® or Maxxion R® developed caries lesion. Conclusion: Ketac Molar® retention is significantly superior to that of Maxxion R®, but the preventive effectiveness in the development of carious lesions is similar for both, which is extremely interesting for the field of public health, since the cost of the material is significantly lower.

Antibacterial, chemical and physical properties of sealants with polyhexamethylene guanidine hydrochloride

Abstract The aim of this study was to evaluate the influence of polyhexamethylene guanidine hydrochloride (PHMGH) in the physico-chemical properties and antibacterial activity of an experimental resin sealant. An experimental resin sealant was formulated with 60 wt.% of bisphenol A glycol dimethacrylate and 40 wt.% of triethylene glycol dimethacrylate with a photoinitiator/co-initiator system. PHMGH was added at 0.5 (G0.5%), 1 (G1%), and 2 (G2%) wt.% and one group remained without PHMGH, used as control (GCTRL). The resin sealants were analyzed for degree of conversion (DC), Knoop hardness (KHN), and softening in solvent (ΔKHN), ultimate tensile strength (UTS), contact angle (θ) with water or α-bromonaphthalene, surface free energy (SFE), and antibacterial activity against Streptococcus mutans for biofilm formation and planktonic bacteria. There was no significant difference for DC (p > 0.05). The initial Knoop hardness ranged from 17.30 (±0.50) to 19.50 (± 0.45), with lower value for GCTRL (p < 0.05). All groups presented lower KHN after immersion in solvent (p < 0.05). The ΔKHN ranged from 47.22 (± 4.30) to 57.22 (± 5.42)%, without significant difference (p > 0.05). The UTS ranged from 54.72 (± 11.05) MPa to 60.46 (± 6.50) MPa, with lower value for G2% (p < 0.05). PHMGH groups presented no significant difference compared to GCTRL in θ (p > 0.05). G2% showed no difference in SFE compared to GCTRL (p > 0.05). The groups with PHMGH presented antibacterial activity against biofilm and planktonic bacteria, with higher antibacterial activity for higher PHMGH incorporation (p < 0.05). PHMGH provided antibacterial activity for all resin sealant groups and the addition up to 1 wt.% showed reliable physico-chemical properties, maintaining the caries-protective effect of the resin sealant over time.

Selladores de Superficie en Base a Resina: Potencial de Prevenir Tinción Exógena / Resin-based Surface Sealants: Potential to Prevent Exogenous Staining

RESUMEN: El objetivo del presente trabajo fue estudiar el potencial de los selladores de superficie basados en resinas de evitar cambios de color de resinas compuestas de restauración ante la acción de una bebida coloreada. Para ello, se confeccionó una muestra de 40 discos de resina nanocompuesta Filtek Z350 XT (3M- ESPE) color A2D de 7x2 mm, se pulieron en forma convencional con una serie de discos de óxido de aluminio y se distribuyeron aleatoriamente en 2 grupos de 20 especímenes. Al grupo 1 se le selló toda su superficie usando el agente sellador Fortify®, al grupo 2 se le dejó sin tratar. Se sometió a todos los discos (n=40) a un proceso de termociclado luego del cual se procedió a medir su color inicial mediante el espectrofotómetro de punto Vita Easyshadeµ®. Cada grupo de discos fue inmerso en recipientes metálicos de acero inoxidable en un medio que contenía a una infusión concentrada de té negro durante 7 días a 37 ºC. Finalmente, se midió el color final a cada uno de los grupos de discos luego del periodo de inmersión. Los resultados fueron sometidos al análisis estadístico con el programa Stata 12 y el test T-Student con una significancia de p<0,05. Los resultados indicaron un significativo cambio de color de ambos grupos de discos, siendo ligeramente menor en el grupo de discos sellados, sin embargo, no existió diferencia significativa entre ellos. Como conclusión se determinó que bajo las condiciones del presente estudio el uso del agente sellante de superficie Fortify® no evitó el cambio de color de la resina nanocompuesta de restauración.

ABSTRACT: The objective of the present work was to study the potential of surface sealers based on resins to avoid color changes of resin composite restoration before the action of a colored drink. Therefore, a sample of 40 discs of nanocomposite Filtek Z350 XT (3M-ESPE) color A2D of 7x2 mm was included, these were conventionally polished with a series of aluminum oxide discs and randomly distributed in 2 groups of 20 specimens. Group 1 was sealed with its entire surface using Fortify® sealant, group 2 was left untreated. All discs (n = 40) were subjected to a thermocycling process after which their initial color was measured by the Vita Easyshadem® point spectrophotometer. Each group of discs was immersed in metallic stainless steel containers, in a concentrated infusion of black tea for 7 days at 37 °C. Finally, the final color was measured in each of the disk groups following the immersion period. Results were subjected to the statistical analysis with the Stata 12 program and the T-Student test with a significance of p <0.05. The results indicated a significant color change in both groups of discs, being slightly lower in the group of sealed discs, however, there was no significant difference between them. In conclusion it was determined that under the conditions of the present study the use of the Fortify® surface sealant did not prevent the color change of the nanocomposite restoration resin.

Efetividade de selantes de fossas e fissuras aplicados por estudantes de Odontologia na prevenção de cárie / Effectiveness of pit and fissure sealants applied by Dental students for dental caries prevention

Objetivo: avaliar a efetividade dos selantes aplicados por estudantes do curso de graduação em Odontologia da Universidade do Sul de Santa Catarina (Unisul), Grande Florianópolis, após 6 meses da aplicação, e estimar a prevalência de cárie dos participantes. Sujeitos e método: estudo observacional descritivo com indivíduos das clínicas de Odontologia. A efetividade dos selantes oclusais foi avaliada por roteiro validado na literatura, e a prevalência de cárie, dicotomizada. Os dados foram analisados por estatística descritiva e as associações pelo teste Qui-Quadrado. Resultados: a taxa de resposta do estudo foi de 94,7% (n=18), 2/3 da amostra eram do sexo feminino (72,2% IC 95% 49,1;87,5), 60% dos pacientes recebiam 3 salários mínimos ou menos, maiores proporções de indivíduo tinham selados seus dentes há pelo menos 9 meses. Pouco menos de 2/3 da amostra receberam Fluroshield como material restaurador em seus dentes. Dentre os 57 dentes avaliados, 70,2% apresentavam retenção to-tal. Os dentes mais acometidos pela perda de retenção foram os segundos molares superiores (40%). Mais de 2/3 da amostra não apresentaram cárie (88,9% IC 95% 67,2; 96,9). O isolamento relativo foi o mais prevalente (72,2% IC 95% 49,1;87,5). Conclusão: sob a perspectiva das práticas dos estudantes de Odontologia, metade da amostra de pacientes apresentou alguma perda de retenção dos selantes, mesmo que um número maior de retenções totais e a ausência de recidiva de cárie tenham sido observados. Isso reflete a importância da relação professor-aluno no planejamento e na correta aplicação das técnicas de selamento por estudantes de Odontologia. (AU)

Objective: to evaluate the effectiveness of pit and fissure sealants applied by undergraduate dental students of the University of Southern Santa Catarina (Unisul), SC, Brazil, after 6 months, and to estimate the prevalence of caries in the participants. Subjects and method: observational and descriptive study with individuals from the dental clinics. The effectiveness of pit and fissure sealants was evaluated using a script validated in the literature, and the prevalence of caries was dichotomized. The data were analyzed by descriptive statistics and the associations were made using the chi-square test. Results: the response rate of the study was 94.7% (n=18), 2/3 of the sample consisted of women (72.2% 95%CI 49.1, 87.5), 60% of the patients received three Brazilian minimum wages or less, and a great portion of the participants had sealed their teeth at least 9 months earlier. A little under 2/3 of the sample received Fluroshield as restorative material for their teeth. Among the 57 teeth evaluated, 70.2% presented complete retention. The teeth most affected by loss of retention were maxillary left second molars (40%). More than 2/3 of the sample did not present dental caries (88.9% 95%CI, 67.2, 96.9). Relative isolation was the most prevalent (72.2% 95%CI 49.1, 87.5). Conclusion: from the perspective of the practices of dental students, half of the sample of patients presented some loss of sealant retention, despite the greater number of complete retentions and absence of recurrent caries. This reflects the importance of the teacher-student relationship in the planning and correct application of sealing techniques by dental students. (AU)