Survival rate and stability of surface-treated and non-surface-treated orthodontic mini-implants: a randomized clinical trial

ABSTRACT Objectives: This clinical trial was conducted to evaluate the stability and failure rate of surface-treated orthodontic mini-implants and determine whether they differ from those of non-surface-treated orthodontic mini-implants. Trial Design: Randomized clinical trial with a split-mouth study design. Setting: Department of Orthodontics, SRM Dental College, Chennai. Participants: Patients who required orthodontic mini-implants for anterior retraction in both arches. Methods: Self-drilling, tapered, titanium orthodontic mini-implants with and without surface treatment were placed in each patient following a split-mouth design. The maximum insertion and removal torques were measured for each implant using a digital torque driver. The failure rates were calculated for each type of mini-implant. Results: The mean maximum insertion torque was 17.9 ± 5.6 Ncm for surface-treated mini-implants and 16.4 ± 9.0 Ncm for non-surface-treated mini-implants. The mean maximum removal torque was 8.1 ± 2.9 Ncm for surface-treated mini-implants and 3.3 ± 1.9 Ncm for non-surface-treated mini-implants. Among the failed implants, 71.4% were non-surface-treated mini-implants and 28.6% were surface-treated mini-implants. Conclusion: The insertion torque and failure rate did not differ significantly between the groups, whereas the removal torque was significantly higher in the surface-treated group. Thus, surface treatment using sandblasting and acid etching may improve the secondary stability of self-drilling orthodontic mini-implants. Trial registration: The trial was registered in the Clinical Trials Registry, India (ICMR NIMS). Registration number: CTRI/2019/10/021718

RESUMO Objetivos: Este ensaio clínico foi conduzido para avaliar a estabilidade e a taxa de falha de mini-implantes ortodônticos com superfície tratada, e determinar se elas diferem das dos mini-implantes ortodônticos sem superfície tratada. Desenho do estudo: Ensaio clínico randomizado com desenho de boca dividida. Instituição: Department of Orthodontics, SRM Dental College, Chennai/India. Participantes: Pacientes que necessitavam de mini-implantes ortodônticos para retração anterior em ambas as arcadas. Métodos: Mini-implantes ortodônticos autoperfurantes, cônicos, de titânio com ou sem tratamento de superfície, foram colocados em cada paciente, seguindo um desenho de boca dividida. Os torques máximos de inserção e de remoção foram medidos para cada mini-implante, usando um torquímetro digital. As taxas de falha foram calculadas para cada tipo de mini-implante. Resultados: O valor médio do torque máximo de inserção foi de 17,9 ± 5,6 Ncm para mini-implantes com superfície tratada e 16,4 ± 9,0 Ncm para mini-implantes sem superfície tratada. O valor médio do torque máximo de remoção foi de 8,1 ± 2,9 Ncm para mini-implantes com superfície tratada e 3,3 ± 1,9 Ncm para mini-implantes sem superfície tratada. Entre os implantes que falharam, 71,4% eram mini-implantes sem superfície tratada e 28,6% eram mini-implantes com superfície tratada. Conclusão: O torque de inserção e a taxa de falha não diferiram significativamente entre os grupos; porém, o torque de remoção foi significativamente maior no grupo com superfície tratada. Assim, o tratamento de superfície com jateamento e condicionamento ácido pode melhorar a estabilidade secundária dos mini-implantes ortodônticos autoperfurantes. Registro do estudo: Esse estudo foi registrado no Clinical Trials Registry, Índia (ICMR NIMS). Número de registro: CTRI/2019/10/021718

Comparative evaluation of implant stability in two different implant systems at baseline and 3–4 months intervals using RFA device (OSSTELL ISQ)

Introduction: Osseointegration as formulated by Alberktson is crucial for implant survival and success. Osseointegration is a measure of implant stability. Measuring implant stability helps to arrive at decisions as to loading of an implant, allows protocol choice on a patient to patient basis and provides enhanced case documentation. The RFA technique provides with clinically relevant information about the state of the implant–bone interface at any stage after implant placement. Aim: Evaluation of primary and secondary stability between implants of two different systems by resonance frequency analysis device. Methodology: This study was conducted among 17 patients divided into two groups. Group 1 (n = 10) receiving 20 MIS seven implants and Group 2 (n = 7) received 20 Alphadent active implants. The primary implant stability was measured at the time of implant placement and secondary stability is measured at 3–4 months interval using RFA device OSSTELL ISQ. Statistical analysis was performed using paired t test for intra group and independent sample test for intergroup comparisons. Results: No statistically significant differences in primary and secondary stabilities were found between the implant systems at either time intervals (P > 0.05). A positive correlation was noticed between mesiodistal stability and implant diameter in MIS seven group (P < 0.05). A positive correlation was noticed between mesiodistal, labiolingual stabilities and implant diameter in Alphadent group (P = 0.03). A positive correlation was noticed between mesiodistal, labiolingual stabilities and implant length in Alphadent group (P = 0.03). Conclusion: From the present data, it can be concluded that within the limitations of study, implant systems used and their design features showed no significant correlation to implant stability between the groups. More studies are required to assess the effect of implant designs and surface conditions on implant stability on a long-term basis.

Estabilidad de los miniimplantes en Ortodoncia. "Biología ósea y Biomecánica" / Miniimplant stability in Orthodontics. "Bone Biology and Biomechanics"

El anclaje ha sido un aspecto crucial para la mayoría de los tratamientos de Ortodoncia. En las últimas dos décadas, el anclaje con miniimplantes ha aumentado el espectro de posibilidades para muchos tipos de tratamientos por presentar numerosas ventajas y pocas desventajas. Este artículo pretende hacer una revisión de literatura sobre los mecanismos de la biología ósea básica, como los aspectos mecánicos los activan y modulan; como se genera la estabilidad primaria y secundaria, como incide de manera crítica el porcentaje de éxito con el uso de los miniimplantes y como se ha estudiado esta interrelación por medio de modelos con elementos finitos.

Anchorage is crucial in most orthodontic treatments. During the last two decades, anchorage with mini-screw implants has increased the number of possibilities for many different types of orthodontic treatments. The aim of this paper is to present a literature review regarding how bone biology processes are elicited and modulated; how primary and secondary stability influence the success rate when mini-screw implants are used; and how this relation has been studied by means of the finite element method.