ABSTRACT
ABSTRACT: The objective of this study was to produce vinegar from mangaba pulp using semi-solid alcoholic fermentation combined with the enzymatic activity of pectinase and to investigate the chemical composition and sensory characteristics of the final product. was evaluated for volatile acidity and the reduced dry extract was evaluated for ashes, alcohol content, sulfates, pH, total phenolic compounds, total carotenoids, color parameters, yield, productivity, and sensory analysis. Average and standard deviation was used for descriptive statistics. Principal component analysis (PCA) was applied to all variables except total carotenoid content. Physicochemical characterization of the raw and alcoholically fermented pulp was also carried out. The main results showed that, in the vinegar, the reduced dry extract, volatile acidity, pH, and ashes were 44.3±1.5 (g/L), 4.4±0.1 (% w/v), 3.1±0.0, and 3.0±0.41 (g/L), respectively. The total phenolic compound content and total carotenoid content for the mangaba vinegar were 19.2±8.20. mg/100 g and 2.6±0.6. mg/100 g, respectively. The conversion yield from ethanol to acetic acid was 90%. PCA showed that pH and volatile acidity had a strong influence on the product, and there was a strong positive correlation between color and aroma. The final product met all legal requirements, showing that it is possible to produce mangaba vinegar with antioxidant potential for consumers. In the sensory evaluation, it was favored by the tasters, demonstrating potential economic value in the Cerrado fruit.
RESUMO: Objetivou-se produzir vinagre, a partir da polpa de mangaba por fermentação alcoólica semi-sólida com ação enzimática através da pectinase, investigar a composição química e avaliação sensorial do produto final. O vinagre foi avaliado através da acidez volátil, extrato seco reduzido, cinzas, teor alcoólico, sulfatos, pH, compostos fenólicos totais, carotenoides totais, parâmetros de cor, rendimento, produtividade e análise sensorial. Os dados foram submetidos a estatística descritiva com média e desvio padrão. Foi aplicado a análise de componentes principais (ACP) para todas as variáveis, exceto para análise de carotenoides totais. Também foi realizada a caracterização físico-química da polpa e fermentado alcoólico. Os principais resultados mostraram que, no vinagre, extrato seco reduzido, acidez volátil, pH e cinzas foram, respectivamente, 44,3±1,5 (g/L), 4,4±0,1 (% m/v), 3,1±0,0, 3,0±0,41 (g/L). Os compostos fenólicos totais e carotenoides totais apresentaram valores de 19,2±8,20 (mg/100 g) e 2,6±0,6 (mg/100 g), respectivamente. O rendimento de conversão de etanol a ácido acético foi de 90%. ACP foi aplicada nas variáveis físico-químicas do vinagre no qual os parâmetros de cor, pH e acidez volátil apresentaram forte influência no produto e, para os atributos da análise sensorial, cor e aroma apresentaram uma forte correlação positiva entre si. O produto final atendeu a todos os quesitos legais, demonstrando ser possível a produção de vinagre de mangaba com potencial antioxidante. Na avaliação sensorial teve boa aceitação pelos provadores, valorizando o uso deste fruto do Cerrado.
ABSTRACT
Aim: The present study aimed at optimization of Lactic acid production using new isolate, Lactobacillus plantarum JX183220 with cassava flour (Manihot esculenta Crantz) in semi-solid fermentation by Response Surface Methodology. Study Design: Box-Behnken design of Response Surface Methodology was used. Place: Department of Chemical Engineering and Biotechnology, ANITS, Visakhapatnam. Materials and Methods: Lactobacillus plantarum JX183220 isolated from goat milk was used for the production of Lactic acid using cassava flour (CF) in semi-solid fermentation. Different fermentation parameters such as incubation time, inoculum volume, pH, temperature, substrate concentration (cassava flour), and Calcium carbonate concentration were initially optimized in preliminary studies. The substrate concentration, temperature and pH were chosen as potential variables and further optimized using Box-Behnken design of Response Surface Methodology. A second order polynomial regression model was fitted and was found adequate with a high coefficient of determination, R2 (0.9913). Validation experiment was carried out at optimum conditions of the parameters as determined from the model. Results: The preliminary experiments revealed that maximum production of lactic acid by Lactobacillus plantarum JX183220 was observed on 4th day of incubation with 2% inoculum and 0.3% Calcium carbonate. Optimization using Box -Behnken design of RSM resulted in maximum Lactic acid production of 18.3679 g/100 g of cassava at optimum conditions of substrate concentration, 1.225%; Temperature, 36.39°C and pH 6.43. These results were confirmed by validation experiment. Conclusion: Optimum parameters for the direct conversion of cassava flour starch to Lactic acid by new isolate, Lactobacillus plantarum JX183220 were determined. Box Behnken design of RSM was found to be convenient tool with 15 runs for optimizing lactic acid production. The lactic acid production could be further enhanced by saccharification and fermentation in future studies.
ABSTRACT
The aim of the present work was to select filamentous fungi isolated from diverse substrates to obtain the strains with potential to produce the hydrolytic enzymes. From a total of 215 strains, seven strains from the soils, six from the plants and one from sugarcane bagasse were selected and identified as belonging to the Trichoderma, Penicillium and Aspergillus genera. The best hydrolytic activities obtained by semi-solid fermentation using these strains were approximately: 35; 1; 160; 170 and 120 U/gdm (CMCase, FPase, β-glucosidase, xylanase and polygalacturonase, respectively), demonstrating their potential to synthesize the enzymes compared with the results reported in the literature.
ABSTRACT
During extraction of starch from cassava, fibrous residue is a major waste released into the environment. Owing to the high starch content (60- 65% on dry weight basis) and organic matter of cassava fibrous residue (CFR), an attempt has been made to utilize it for the production of lactic acid (LA) in semi- solid state fermentation using Mann Rogassa Sharpe medium containing [5 % (wv-1)] CFR in lieu of glucose [2 % (wv-1)] as the carbon source. Response Surface Methodology (RSM) was used to evaluate the effect of main variables, i.e. incubation period, temperature and pH on LA production. The experimental results showed that the optimum incubation period, temperature and pH were 120 hr, 350C and 6.5, respectively. Maximum starch conversion by Lactobacillus plantarum MTCC 1407 to LA was 63.3%. The organism produced 29.86 g of (L+) LA from 60 g of starch present in 100 g of CFR. The LA production yield (i.e. mass LA produced mass starch present in CFR-1 x 100) was 49.76 %.