Efficacy of micro steel plate and Kirschner needle oblique and transverse internal fixation of adjacent metacarpal bone in the treatment of metacarpal diaphyseal oblique fracture / 中国骨伤

OBJECTIVE@#To compare the clinical efficacy of micro steel plate and Kirschner needle oblique and transverse internal fixation of adjacent metacarpal bone in the treatment of metacarpal diaphyseal oblique fracture.@*METHODS@#Fifty-nine patients with metacarpal diaphyseal oblique fractures admitted between January 2018 and September 2021 were selected as the study subjects and divided into the observation group (29 cases) and the control group (30 cases) based on different internal fixation methods. The observation group was treated with Kirschner wire oblique and transverse internal fixation of adjacent metacarpal bones, while the control group was treated with micro steel plate internal fixation. Postoperative complications, operation time, incision length, fracture healing time, treatment cost, and metacarpophalangeal function were compared between the two groups.@*RESULTS@#No incision or Kirschner wire infections occurred in the 59 patients, except for one in the observation group. No fixation loosening, rupture, or loss of fracture reduction occurred in any of the patients. The operation time and incision length in the observation group were (20.5±4.2) min and (1.6±0.2) cm, respectively, which were significantly shorter than those in the control group (30.8±5.6) min and (4.3±0.8) cm (P<0.05). The treatment cost and fracture healing time in the observation group were (3 804.5±300.8) yuan and (7.2±1.1) weeks, respectively, which were significantly lower than those in the control group (9 906.9±860.6) yuan and (9.3±1.7) weeks (P<0.05). The excellent and good rate of metacarpophalangeal joint function in the observation group was significantly higher than that in the control group at 1, 2, and 3 months after operation (P<0.05), but there was no significant difference between the two groups at 6 months after operation (P>0.05).@*CONCLUSION@#Micro steel plate internal fixation and Kirschner wire oblique and transverse internal fixation of adjacent metacarpal bones are both viable surgical methods for treating metacarpal diaphyseal oblique fractures. However, the latter has the advantages of causing less surgical trauma, shorter operation time, better fracture healing, lower cost of fixation materials, and no need for secondary incision and removal of internal fixation.

Surgical Treatments for Femoral Shaft Fractures: A Narrative Review

@#Femoral shaft fractures are increasingly common due to various traumatic injuries. Intramedullary nail (IMN) is considered the gold standard treatment for these fractures, but comorbidities often require thorough trauma life support and intensive care. The primary goal of treatment is rigid fixation, early mobilisation, and long-term functional recovery. This article reviews current concepts in the treatment of femoral shaft fractures, including the effects of early or delayed operation, differences between antegrade or retrograde intramedullary nailing, alternative methods to using a fracture table, methods to predict nail length before operation, assessing femoral rotation during an operation, and complications.

Compartment Syndrome following Intramedullary Nail Fixation in Closed Tibial Shaft Fractures

@#Introduction: Compartment syndrome complicating intramedullary nailing of closed tibia fractures has been described as early as the 1980s, but currently remains less described in literature compared to compartment syndrome directly following trauma. This study aims to review this potentially disabling complication and highlight the importance of timely diagnosis and management of compartment syndrome following fracture fixation, not just after fracture itself, via a review of three cases. Material and methods: A retrospective study of a series of three cases was conducted. The type of fracture, wait time to fixation, surgery duration, reaming, size of nail implant used, tourniquet time, and surgical technique were recorded. Time to diagnosis of compartment syndrome, compartment pressure if available, extent of muscle necrosis, reconstructive procedures performed, and post-operative complications were analysed. Results: The three cases following high-energy trauma from road traffic accidents presented from January to May 2010. Compartment syndrome was diagnosed clinically for all cases, between one to six days post-operatively and supported by elevated compartment pressure measurements in two of the three cases. Conclusion: This study advocates thorough clinical monitoring and maintaining strong clinical suspicion of compartment syndrome in patients even after intramedullary nail fixation of tibial shaft fractures to achieve timely limbsalvaging intervention. While intercompartmental pressure can be used to aid in diagnosis, we do not advise using it in isolation to diagnose compartment syndrome. Tendon transfer improves functional mobility and provides a good result in patients with severe muscle damage, while skin grafting sufficient in patients with minimal muscle damage.

Electric scooter injuries: Incidence and injury patterns at a level I trauma center / 中华创伤杂志(英文版)

PURPOSE@#Electric scooters (e-scooters) have become an increasingly popular mode of public transportation in recent years. As the incidence of related injuries rises, it is important to understand specific fracture patterns unique to e-scooters and electric bikes (e-bikes) to help guide management. The purpose of this study was to review the prevalence and describe specific fracture patterns of e-scooter and e-bike related injuries at the busiest level 1 trauma center in the borough of Manhattan.@*METHODS@#Chart review to determine mechanism of injury was performed on all patients for whom an orthopedic consult was requested from 1/1/2021 to 12/31/2021. All patients whose injuries were sustained due to an e-scooter or e-bike were further reviewed for demographics, injury characteristics including fracture pattern, and definitive injury management. Any patients who had an orthopedic consult placed for a reason other than an acute injury were excluded. Descriptive statistics are reported as frequency (percentage) for categorical variables and means for continuous variables.@*RESULTS@#Of the 1815 orthopedic consults requested, 1357 (74.8%) were for acute injury management. Of those with acute injuries, 119 (8.8%) sustained 136 e-scooter or e-bike related injuries. There were 92 (77.3%) males at an average age of (33.8 ± 15.7) years. Approximately one-fifth of all patients presented in June 2021 (26, 21.8%). There was a 9.2% rate of open fractures. The 136 injuries were evenly split between the upper and lower extremities, with 57 (47.9%) upper extremity, 57 (47.9%) lower extremity injuries, and 5 (4.2%) concomitant upper and lower extremity injuries. The most common fracture patterns were ankle fractures (16, 11.7%), followed by tibial shaft (14, 10.2%), tibial plateau (13, 9.5%), and radial head fractures (11, 8.0%). There was a 33.3% incidence of associated posterior malleolar fractures in the spiral tibial shaft fractures, 31.0% of posterior malleolar involvement and 18.8% of isolated vertical medial malleolar fractures in the ankle fractures, and 61.5% of posterior comminution in the tibial plateau fractures.@*CONCLUSION@#E-scooter and e-bike related injuries have a high incidence of tibial shaft fractures, ankle fractures, tibial plateau fractures, and radial head fractures. There should be a high index of suspicion for posterior and medial involvement in lower extremity fractures sustained due to e-scooter or e-bikes. Identifying specific fracture patterns seen in e-scooter and e-bike related mechanisms will help guide management of these injuries.

Augmenting locking plate with autologous bone graft for the treatment of nonunion of long bone fracture in the lower extremity with retaining of the original intramedullary nail / 中国骨伤

OBJECTIVE@#To explore clinical effect of attaching locking plate with bone grafting based on retaining the original intramedullary nail in treating non-union after intramedullary nail fixation of long shaft fractures of lower limbs.@*METHODS@#A retrospective study was conducted on 20 patients treated with non-union fractures after intramedullary nailing of long shaft fractures of lower limbs from June 2015 to June 2020. All patients were treated with the original intramedullary nailing and bone grafting from the iliac bone, and were underwent open reduction plate internal fixation and bone grafting for old fractures. Among them, 14 were males and 6 were females, aged from 35 to 56 years old with an average of (42.2±9.6) years old. Nine patients were femoral shaft fracture and 11 patients were tibial shaft fracture. According to characteristics of fracture end nonunion, 6 patients were stable/atrophic, 9 patients were unstable/large, and 5 patients were unstable/atrophic. The nonunion time ranged from 8 to 12 months with an average of(9.8±2.0) months after the initial surgery. Visual analogue scale (VAS), knee range of motion, bone healing time, complications and fracture-end healing were recorded before and at the latest follow-up.@*RESULTS@#All patients were followed up for 18 to 48 months with an average of (36.3±10.5) months. The incision of all patients were healed at stageⅠwithout complications such as infection or internal fixation ruptur. Healing time of femur and tibia was (8.5±2.6) months and (9.5±2.2) months. Knee joint motion increased from preoperative (101.05±8.98) ° to postoperative (139.35±8.78) ° at the latest follow-up (t=-12.845, P<0.001). VAS decreased from preoperative (5.15±1.72) to postoperative (0.75±0.96) at the latest follow-up (t=11.186, P<0.001).@*CONCLUSION@#On the basis of retaining the original intramedullary nail, the addition of locking plate internal fixation and autogenous iliac bone grafting have advantages of simple operation, less trauma, fewer complications and high fracture healing rate. It is one of the effective surgical schemes for the treatment of nonunion after intramedullary nail fixation of long bone fracture of lower extremity.

Surgical treatment for ipsilateral femoral neck and shaft fracture / 中国骨伤

OBJECTIVE@#To retrospectively analyze efficacy of single structure internal fixation and double structure internal fixation in the treatment of ipsilateral femoral shaft and neck fracture, and analyze their indications.@*METHODS@#From June 2015 to December 2020, 21 patients with ipsilateral femoral shaft and femoral neck fracture were treated, including 14 males and 7 females, aged 23 to 69 years old with an average of(38.1±12.9) years old. According to different femoral shaft fracture sites, some patients were fixed with cephalomedullary implant for both femoral neck and the femoral shaft(single structure, InterTan or PFNA Ⅱ), some patients were fixed with cannulated screws for the femoral neck and a retrograde locking nail for the femoral shaft (dual structure), and postoperative function and complications were recorded during follow-up. In 10 cases of single-structure fixation, the femoral necks were all basicervical fractures, and the femoral shaft fractures were located in the proximal isthmus;11 cases were double-structure fixation, 9 cases in 11 were basal type of femoral neck, 2 cases in 11 were neck type, and the femoral shaft fractures were located in the isthmus and the distal isthmus.@*RESULTS@#All patients were followed up for 12 to 27 months. No femoral head necrosis, deformity, delay or nonunion occurred in the patients with single-structure fixation, and no delayed union or nonunion occurred in femoral shaft fractures;At the final follow-up, Harris score of patients with single-structure fixation was 91.8±4.1, with 8 cases were excellent and 2 cases were good. The fractures of patients with dual-structure fixation achieved good union without femoral head necrosis, except 1 case of femoral shaft fracture had delayed union;At the final follow-up, Harris score of patients with dual-structure fixation was 92.4±5.9, 7 cases were excellent, 3 cases were good, and 1 case was fair.@*CONCLUSION@#Good reduction and fixation is the key to the treatment of such fractures. Both the single-structure fixation and the dual-structure fixation are good methods, and it should be selected according to the locations of femoral shaft and femoral neck fractures. Single-structure fixation is a good choice for femoral shaft fractures located at the proximal isthmus and basal femoral neck fractures. For isthmus and distal femoral shaft fractures combined with ipsilateral femoral neck fractures, dual-structure fixation is recommended.

Outcome of Pediatric shaft Radius-Ulna Fractures managed with Titanium Elastic Nailing System

Aims and objectives: To study the functional outcome of TENS in Pediatric shaft radiusulna fracture.Introduction: Symmetrical bracing action of elastic nails inserted into the metaphysis, thatbears against the inner bone at three points is the principal of the titanium elastic nailing.Early stability to the involved bone fragments is the benefit of this method and it permitsearly mobilization and returns to the normal activities of the patients, with very lowcomplication rate.Materials and methods: A retrospective study of 40 pediatric patients with closed and opengrade 1 shaft radius-ulna fracture carried out at our institute between 2018-2019 treated withTENS and observed for a period of minimum 1.5 years.Conclusion : It can be concluded that TENS nailing in pediatric shaft radius-ulna fractures isan excellent modality of treatment and has very low complication rate.

Comparative Study of Outcome of Treatment of Fracture Shaft of Femur by Open Intramedullary Kuntscher抯 Nail and Closed Intramedullary Interlocking Nail

Fractures of the femoral shaft are one of the most common injuries treated by orthopedic surgeons. These fractures are often associated with polytrauma and can be life-threatening.For physiologically stable individuals, Intramedullary Nailing (IMN) is the most prevalent therapy. Early healing and long-term functional recovery are the goals of fixation. Treatment of modern-day femoral shaft fractures results in excellent outcomes. Aims : To assess the results of intramedullary nailing of femoral shaft fractures by both open and closed methods. Methods : Primary, non-randomized, prospective cohort study, Patients having fracture shaft of femur who was admitted in MGM Medical College & LSK Hospital, Kishanganj was taken for the study, The study period from October 2019 to April 2021. Total 40 cases were enrolled, Open Kuntcher抯 Nail-20 cases & Closed Interlocking Nail-20 cases. Results : Male cases are predominantly high than females among the two groups. Maximum number of fracture (70% in Closed Interlocking Nail group and 80% in Open K-nail group) Radiological union within 15 weeks.Maximum number of the cases found excellent results in both groups. ie, 70% & 65% respectively. In this study, we have not found any poor & fair patients after surgical outcome. Chi-square value 0.1139 & P-value- is 0.735. Conclusion : Except for the period from injury to surgery and operating time, there was no significant difference between the two groups in terms of demographic data, fracture type, and associated co-morbidities and radiological union. When utilised to fix short oblique and transverse fractures near the isthmus of the femur, Kuntscher抯 intramedullary nailing can yield a comparable rate of union to interlocking intramedullary nailing.

Morphometry and Sexual Dimorphism of the Human Clavicle in South Indian Population

Background: In forensic anthropology, determining an individual’s sex is the fundamental criteria of identification, but this is a tough task that gets considerably more difficult when only a single bone, such as the clavicle, is available. In physical anthropology, determining the sex of a deceased individual is a fundamental prerequisite. Physical anthropologists have gotten more concerned about the difficulties of human identity in recent years. Traditional techniques of sexing bone are subjective and ineffective when absolute sexing precision is desired, hence this study. Methods: Measurement of clavicular length and circumference using an Osteometric board or sliding and Vernier Callipers product from 1128 dry clavicles of unknown sex and age procured from various medical institutions and departments of anthropology in south India. Length, inner angle, outer angle, the sum of angles, inner segment, middle segment, outside segment, width at the inner end at an inner angle, least width at conoid tubercle, at the outer end, and mid circumference have all been measured. Results and Discussion: The male mid-shaft circumference is 38.0±0.5mm on the right side and 36.5±0.5mm on the left side, whereas the female mid-shaft circumference is 31.4±0.3mm on the right side and 31.4±0.6mm on the left side. The length of the left clavicle is greater than the length of the right collarbone. The curvature of the right collarbone is higher than that of the left, resulting in a shorter right bone than the left. The clavicle of males has a higher mean across all parameters than females. Male clavicle length is more than female clavicle length, midshaft circumference is less in females than males, and breadth at an inner angle is shorter in females than men, all of which are statistically significant. The Mid-shaft Circumference as a sex-determination metric is statistically significant in differentiating the clavicle’s sex. This delivers a better result than clavicle weight since clavicle weight fluctuates with age and the health state of the individual. Male clavicles have a larger Midshaft Circumference than female clavicles.

Tricomicosis palmelina causa poco frecuente de afectación del tallo piloso / Trichomycosis palmelina: rare cause of hair shaft affection

Resumen La tricomicosis o tricobacteriosis palmelina es un motivo de consulta poco frecuente en los servicios de dermatología, es importante reconocerla y diferenciarla de otras patologías ya que puede ser difícil de diagnosticar. La tricomicosis o tricobacteriosis es una condición infecciosa superficial asintomática, rara, causada en la mayoría de los casos por Corynebacterium flavescens (también llamada Corynebacterium tenuis), perteneciente a la familia corinebacteriaceae, las cuales, son bacterias gram positivas, pleomórficas, inmóviles, no encapsuladas, aerobias o anaerobias facultativas. Afecta pelos de la región axilar, zona púbica, escrotal e interglutea; se debe al aumento de la población bacteriana de la microbiota normal, adherida a la cutícula del pelo. Esta afectación es propia de climas húmedos, afectando predominantemente a adultos jóvenes, de sexo masculino, deportistas y homosexuales en un entorno de pobreza y hacinamiento. El objetivo del presente reporte es comunicar un caso de tricomicosis palmelina flava en región púbica en un adulto joven y describir las características clínicas de esta patología relativamente poco conocida.

Abstract Trichomycosis or palmelin trichobacteriosis it is an infrequent reason for consultation in dermatology services, important to recognize and differentiate it from other pathologies since it can be difficult to diagnose. Trichomycosis or trichobacteriosis is a rare, asymptomatic superficial infectious condition, caused in most cases by Corynebacterium flavescens (also called Corynebacterium tenuis), belonging to the Corynebacteriaceae family, which are gram-positive, pleomorphic, immobile, non-encapsulated bacteria, aerobic or facultative anaerobic. It affects hairs in the axillary region, pubic, scrotal and intergluteal area; It is due to the increase in the bacterial population of the normal microbiota, attached to the hair cuticle. This affectation is typical of humid climates, predominantly affecting young adults, males, athletes and homosexuals in an environment of poverty and overcrowding. The objective of this article is to report a case of trichomycosis palmellina flava in the pubic region present in a young adult and to present the clinical characteristics of this relatively unrecognized condition.

Comparison of cannulated screwing versus plating in combination with interlocking intramedullary nailing for ipsilateral discontinuous fractures of tibial shaft and plateau / 中华创伤骨科杂志

Objective:To compare the clinical effects between cannulated screwing and plating in combination with interlocking intramedullary nailing for the treatment of ipsilateral discontinuous fractures of the tibial shaft and plateau.Methods:A retrospective analysis was performed of the clinical data of 34 patients who had been treated for ipsilateral discontinuous fractures of the tibial shaft and plateau at Department of Orthopedics and Trauma, Honghui Hospital Affiliated to Xi′an Jiaotong University from January 2015 to January 2020. There were 17 males and 17 females, aged from 26 to 60 years (average, of 43.6 years). The left side was affected in 18 cases and the right side in 16. The patients were divided into 2 groups according to their internal fixation methods: a cannulated screw group of 16 cases treated with cannulated screwing and intramedullary nailing and a plate group of 18 cases treated with plating and intramedullary nailing. The 2 groups were compared in terms of operation time, intraoperative blood loss, incision length, tibial plateau collapse, consumables cost, hospital stay, fracture healing time, weight-bearing time, range of knee motion, reduction of tibial plateau fracture by Rasmussen radiology, Lysholm knee function score at the last follow-up and complications.Results:There was no significant difference in the preoperative general data between the 2 groups, showing the 2 groups were comparable ( P>0.05). All the 34 patients were followed up for 12 to 28 months (average, 17.4 months). There was no significant difference either in operation time, hospital stay, tibial plateau healing time, tibial fracture healing time, weight-bearing time or range of knee motion between the 2 groups ( P>0.05). In the cannulated screw group, the intraoperative blood loss [(89.4 ± 14.5) mL] and consumables cost [(2.0 ± 0.2) ten thousand yuan] were significantly less than those in the plate group [(120.8 ± 22.1) mL and (2.6 ± 0.4) ten thousand yuan], the incision length [(4.1 ± 0.8) cm] was significantly shorter than that in the plate group [(7.1 ± 0.9) cm], and the Lysholm knee function score at the last follow-up [(89.8 ± 4.5) points] was significantly lower than that in the plate group [(93.0 ± 4.2 points] (all P<0.05). The difference was statistically significant between the 2 groups in the quality of tibial plateau reduction ( P<0.05). The postoperative tibial plateau collapse in the plate group [0.5 (0, 2) mm] was insignificantly less than that in the cannulated screw group [1.0 (0, 2) mm] ( P>0.05). In the cannulated screw group, one tibial shaft fracture did not achieve union after operation and deep vein thrombosis occurred in 2 cases after operation; in the plate group, 2 cases suffered from delayed wound healing, one from delayed fracture healing, one from deep venous thrombosis of lower extremity, and one from knee discomfort which was relieved after removal of internal fixation. Conclusions:In the treatment of ipsilateral discontinuous fractures of tibial shaft and plateau, both cannulated screwing and plating in combination with interlocking intramedullary nailing can achieve good clinical effects. Although plating in combination with intramedullary nailing lead to more severe trauma and higher costs, it is conducive to improving the reduction quality of the tibial plateau and postoperative functional recovery of the knee joint.

Application of autologous platelet-rich plasma in the treatment of postoperative bone nonunion for long bone shaft fractures during and after operation / 中国输血杂志

【Objective】 To explore the clinical effects of autologous platelet-rich plasma (PRP) in the treatment of postoperative bone nonunion for long bone shaft fractures during operation and after operation. 【Methods】 A total of 34 patients with postoperative bone nonunion for long bone shaft fracture, who were admitted and cured in the Orthopedics Department of our hospital from January 2019 to June 2020, were selected. They were randomly divided into the experimental group(n=17) and control group(n=17). Individuals in the control were treated with autologous iliac bone alone., while the experimental group were treated with autologous iliac bone graft plus autologous PRP during and after operation. After surgery, the autogenous PRP was accurately injected with ultrasound guidance every 7 days (5 mL/person, 4 occasions in total). The clinical healing time of the fracture, the grading of callus formation and the functional rehabilitation level of limbs on the affected side at different time were observed in both groups. 【Results】 All 34 patients were followed up. In the experimental group and the control group, the clinical healing time (month) of the fracture was (5.03±1.24) vs (6.91±1.41), P<0.05. The healing rate of the fracture for 6 months and 9 months was 94%(16/17)vs 59%(10/17)and 94%(16/17)vs 82%(14/17), respectively (P<0.05). The grading of callus formation within 3, 6 and 9 months was (2.11±0.69) vs (1.53±0.80), (3.06±0.90) vs (2.59±0.87) and (3.82±0.73) vs (3.35±0.86), respectively (P<0.05). The acceptance rate of functional rehabilitation of limbs on the affected side was 82.35%(14/17)vs 76.47%(13/17), P<0.05. 【Conclusion】 The application of autologous PRP in the treatment of postoperative bone nonunion for long bone shaft fractures during operation and after operation can achieve good clinical treatment.

Removing a Bent Femoral Intramedullary Nail Cost Effectively: A Case Report

@#A bent intramedullary (IM) nail becomes challenging and technically demanding to the orthopaedic surgeon for nail extraction. A broken nail can be easily removed through the fracture site. However, a bent nail has to be broken before it can be removed. Several studies and case reports outline the strategies and techniques for removing a bent IM nail. However, there is a paucity of guidelines and standard protocol describing the best and inexpensive strategy. We report a case where two years following surgery for intramedullary nailing of the right femur, the IM mail was bent following secondary trauma. We used a technique based on the principles of an ability to fully cut the nail and extract it in two pieces by using a Jumbo cutter which is available in the orthopaedic armamentarium. This technique is simple yet economical, with the likelihood of causing less soft tissue damage and thermal necrosis.

Prevention and treatment of complications in the treatment of femoral shaft closed fracture with core drilling intramedullary nail / 中国骨伤

OBJECTIVE@#To summarize the complications of core drilling intramedullary nail in the treatment of femoral shaft closed fracture and explore the treatment strategy.@*METHODS@#From August 2014 to June 2018, a total of 215 patients with closed femoral shaft fractures were treated with closed reduction core drill intramedullary nail, including 129 males and 86 females, aged from 18 to 62 years, with an average of (44.2±10.6) years old. The time from injury to operation was 3 to 21 days. There were 102 cases of AO type A fracture, 82 cases of AO type B fracture and 31 cases of AO type C fracture. The time of operation, the amount of blood loss during operation, the duration of hospitalization, the time of fracture healing and the HSS score of knee joint function at the last follow-up were recorded. The observation of complications included:iatrogenic fracture, core drill broken, core drill twist, postoperative infection, and fracture nonunion.@*RESULTS@#The average operation time was (63.2± 15.6) min and intraoperative blood loss was (150.0±34.5) ml. All the incisions reached grade A healing. Patients were follow up for a mean of (18.5±3.2) months, the average hospital stay was (4.3±1.2) days, and the average fracture healing time was (5.6±2.3) months. At the final follow-up, the average HSS score of knee joint was 90.3±4.7. Related complications occurred in 37 cases (17.2%). The core drill related complications occurred in 13 cases (6.0%), including core drill broken in 5 cases (2.3%), core removal in 1 case and slotting in 4 cases;core drill twist in 8 cases (3.7%). After the core was cut, the core was removed. Similar complicationsof conventional intramedullary nail:iatrogenic fracture was performed in 12 cases (5.6%), including 10 cases of fracture end split and 2 cases of distal perimedullary fracture of intramedullary nail. The patients with cleavage at the fracture end were not treated after judging their stability, and the patients with fracture around the distal end of the intramedullary nail were fixed with auxiliary steel plate during operation;1 case(0.4%) with delayed infection after operation, debridement and external fixation was replaced and healed after bone transfer; fracture nonunion occurred in 11 cases (5.1%), of which 7 cases (3.3%) were hypertrophic nonunion and healed with additional plate. Atrophic nonunion occurred in 4 cases (1.9%), which healed after additional steel plate and bone graft.@*CONCLUSION@#Core drilling intramedullary nail is an effective method for the treatment of closed femoral shaft fracture, and the complications include core drill related complications and conventional intramedullary nail similar complications. Accurate preoperative evaluation, careful operation during operation and early postoperative symptomatic treatment can effectively reduce the occurrence of related complications.

Biomechanical Comparison of Novel and Traditional LCP Fixation for Femoral Shaft Fractures / 医用生物力学

Objective To compare biomechanical properties of the traditional and novel locking compression plate （LCP） for treating femoral shaft fracture, so as to provide theoretical basis for selecting more effective bone plate. Methods The bending strength and fatigue tests on the plate were performed, and the finite element analysis on deformation, stress and life of the plate were conducted by using ANSYS Workbench. Results The average bending yield load and bending strength of the novel LCP were 1.4 times of that of the traditional LCP, and the average cycle times of the novel and traditional LCP were 106 and 47 091, respectively. The difference of service life for two LCPs was 33.8%. ConclusionsThe failure probability of the novel LCP is smaller than that of the traditional LCP, and the novel LCP has more effective biomechanical stability.

A Case of Isolated Trichorrhexis Nodosa and Trichoscopic Images

Summary@#Trichorrhexis nodosa (TN) is a hair shaft disorder characterized by fragile hair with nodes on the hair shaft. Here we report a case of aquired localised trichorrhexis nodosa and describe the importance of noninvasive tools like trichoscopy and light microscopy in the diagnosis of an isolated TN.

Mitochondrial DNA Heteroplasmy of Hair Shaft Using HID Ion GeneStudioTM S5 Sequencing System / 法医学杂志

Objective To study the heteroplasmy of the whole mitochondrial genome genotyping result of hair shaft samples using HID Ion GeneStudioTM S5 Sequencing System. Methods The buccal swabs and blood of 8 unrelated individuals, and hair shaft samples from different parts of the same individual were collected. Amplification of whole mitochondrial genome was performed using Precision ID mtDNA Whole Genome Panel. Analysis and detection of whole mitochondrial genome were carried out using the HID Ion GeneStudioTM S5 Sequencing System. Results The mitochondrial DNA sequences in temporal hair shaft samples from 2 individuals showed heteroplasmy, while whole mitochondrial genome genotyping results of buccal swabs, blood, and hair samples from the other 6 unrelated individuals were consistent. A total of 119 base variations were observed from the 8 unrelated individuals. The numbers of variable sites of the individuals were 29, 40, 38, 35, 13, 36, 40 and 35, respectively. Conclusion Sequence polymorphism can be fully understood using HID Ion GeneStudioTM S5 Sequencing system.

Measurement of Neck-Shaft Angle Using CT Scout View in Healthy Jordanian Adults - A Reliability and Agreement Study

Aims:To report estimates of the reliability and agreement of a new method for measuring the femoral Neck-shaft angle in the Jordanian population. The neck-shaft angle is an important anatomical indicator in orthopedics of the hip. While there are different approaches to measuring the neck-shaft angle in the literature, there is no agreement on the best technique used for measurement. CT scout view was used in this study to provide a promising alternative. Study Design: Observational reliability and agreement study.Places and Duration of the Study:Department of physiotherapy, school of rehabilitation science, University of Jordan and University of Jordan Hospital between March 2014 and October 2015. Methodology:Two independent raters calculated the neck-shaftangle on each hip of 50 pelvic CT scout images of healthy adults to determine inter-rater reliability. One rater performed the measurement twice to determine the intra-rater reliability. Intra-class correlation coefficients were used to examine relative reliability. The standard error of measurement (SEM) and 95% minimal detectable change (MDC) were calculated to examine absolute reliability. Results:The mean value of all angle measurements was 131.3. Intra-class correlation coefficients were 0.726 and 0.63 for inter and intra-rater measurements respectively. SEM and MDC for inter-rater measurements were 2.69 and 7.46 respectively. For intra-rater measurements, they were 2.84 and 7.86 respectively. Conclusion: The new method proposed in this study for measuring the neck-shaft angle showed good reliability and small measurement error.

Gender Variation Of Clavicle In Eastern Odisha

In clavicle the mid shaft circumference is considered as a consistent indicator for determining the sex howeverthe same when combined with length increases its accuracy. The objective of this study was to determine thegender variation in adult dry human clavicles in Eastern Odisha population and to determine variations betweenclavicles of right and left side. An observational study was done on 100 dry clavicles of known sex, in theDepartment of Anatomy, KIMS. There was significant difference between the lengths of male and female claviclesand also the difference in mid shaft circumference between male and female clavicle was significant (p<0.001).The findings of this study will be useful for sex determination of human skeletal remains.

Morphometric Study Of Proximal End Of Femur In Telangana Population

Introduction: The surgeries over the proximal end of femur is common procedure in orthopaedics. Knowledge ofproximal femur’s morphometry can be helpful in reducing the risk of complications linked to surgeries done inthis region due to vascular, metabolic or traumatic causes. The present study is therefore conducted to providedata on the morphometric values of proximal femur and to customize the implant design to suit the Telanganapopulation and thereby reducing the complications.Objectives: 1.To study the various measurements of proximal end of femur 2. To compare the results withprevious studies.Materials and Methods: A total of 180 dry femur have been collected from Department of Anatomy, MamataMedical College. With the aid of the vernier calliper, goniometer and osteometric board, measurements such asfemoral length, transverse diameter of the head, anterior neck length and angle of the neck shaft were measured.Results: The average length of the left femur was 43.33 ± 2.72 cm and 42.95 ± 3.29 cm of the right femur. Theanterior neck length of the right femur was 2.69 ± 0.41 cm, and left femur was 2.61 ±0.34 cm. The neck shaft angleof left femur was 120.3° ± 5.26 and right femur was 119.92° ± 6.27.Conclusion: Relative to other populations, this study showed the measurements of proximal femur in Telanganapopulation were different. The results of this study can be significant in anthropological and medico-legalpractice as well as for the diagnosis and treatment planning of radiologists and orthopaedic surgeons.