ABSTRACT
Objective@#To analyze the condylar and inclination of the occlusal plane features in skeletal Class Ⅲ malocclusion patients with mandibular asymmetry by using cone beam computed tomography(CBCT).@* Methods@#Forty eligible patients with Angle Class Ⅲ malocclusion were enrolled. All individuals were classified based on the distance from Me point to median sagittal plane. The left and right angles between OP and FH plane, the position and morphology of the condyle were measured in both groups.Then the data collected were statistically analyzed. @* Results@#Compared to the opposite side, there was a statistically significant difference(P<0.05) in angle between OP and FH plane, the anterior joint space, superior joint space, lateral joint space and condylar mediolateral diameter, with a higher proportion of joint posteriority in deviated side. Mandibular deviations were positively correlated with both the anterior joint space of the deviated side and the angle between OP and FH plane of the opposite side(P<0.01). There was no statistical difference between the left and right side of angles between OP and FH plane, the position and morphology of the condyle in skeletal Class Ⅲ patients without mandibular deviation(P>0.05); the joint was predominantly in anterior and middle position. @*Conclusion@#There is asymmetry on the left and right sides of the inclination ofocclusal plane, the position and morphology of the condyle of skeletal Class Ⅲ malocclusion patients with mandibular asymmetry. Compared with the opposite side, the deviated side has smaller angle between OP and FH plane and smaller condylar mediolateral diameter, and the condyle shows generally more posterior, inferior and inward movement in glenoid fossa. The inclination of the occlusal plane and the position of condyle are significantly and positively correlated with the distance from Me point to median sagittal plane.
ABSTRACT
Objective @#To study the effect of anterior traction on the temporomandibular joint in adolescent patients with skeletal Class Ⅲ malocclusion.@*Methods@#Twenty-nine patients with early permanent dentition with skeletal class Ⅲ malocclusions were measured by cephalometry and a coordinate system before and after maxillary protraction. The correlation between dentofacial structures and the temporomandibular joint was analyzed. @*Results @# After maxillary protraction, cephalometric measurements showed that the dentofacial structure changed significantly; ANB increased by 3.97° ± 2.32° (P<0.001); U1-SN increased by 4.97° ± 5.51° (P<0.001); L1-MP decreased by 1.26° ± 1.41° (P = 0.008); and MP-SN increased by 1.02° ± 3.90° (P = 0.003). The coordinate system measurement showed that the S-Fpx was decreased by 0.16 ± 1.52 mm (P = 0.041), the S-Ciy distance was significantly decreased by 0.09 ± 2.03 mm (P = 0.028), and there was no significant change in the temporomandibular joint spaces (A, P, and C) (P>0.05). Correlation analysis showed a moderate negative correlation between the posterior margin of the temporomandibular joint fossa and U1-SN (r = -0.427, P = 0.042). There was a moderate positive correlation between the leading edge of the condyle and ANB (r = 0.425, P = 0.043); there was no correlation between the joint space and dentofacial changes. @* Conclusion@#After treatment with maxillary protraction for adolescent skeletal class Ⅲ malocclusion, maxillary protraction had some effect on changes in the temporomandibular joint fossa and condyle and had no effect on the joint space.
ABSTRACT
Objective @# To investigate the changes in the sagittal diameter of the upper airway before and after the treatment of skeletal Class Ⅲ malocclusion in adults with microimplant anchorage and class Ⅲ intermaxillary elastics and to provide a reference for clinical treatment. @*Methods @#A total of 35 adult patients with skeletal Class Ⅲ malocclusion were selected to be treated with the straight-wire technique. Microimplant group, 15 cases (group A): patients with severe skeletal Class Ⅲ malocclusion (vertical high angle) were treated with the straight-wire technique combined with microimplant anchorage; class Ⅲ intermaxillary elastics group, 20 cases (group B): Patients with mild or moderate skeletal Class Ⅲ malocclusion (vertical low angle and average angle) were treated with the straight-wire technique combined with class Ⅲ intermaxillary elastics, and cephalometric radiographs obtained before and after treatment in the upper airway in the two groups were measured and analyzed.@*Results @#Changes in cranial and maxillofacial measurements after correction: in group A, (sella-nasion-supramental angle) the SNB angle decreased significantly (P < 0.05), and (subspinale-nasion-supramental angle) the ANB angle increased significantly (P < 0.05). In group B, the SNB angle decreased significantly (P < 0.05), while (subspinale-nasion-subspinale angle) the SNA angle、ANB angle and anterior skull base plane-mandibular plane angle (Sn-MP) angle increased significantly (P < 0.05). Changes in sagittal diameter of the upper airway measurements after corrections: In group A, the width of the glossopharyngeal segment of the upper airway (TB-TPPW) decreased significantly (P < 0.05). In group B, first segment width of the upper airway behind the hard palate (PNS-R) increased significantly (P < 0.05). After correction, the decreased SNB and increased ANB in group A was higher than that in group B, and the difference was statistically significant （P < 0.05）. The decreased of TB-TPPW in upper airway of group A was greater than that of group B, and the difference was statistically significant （P < 0.05）.@* Conclusions @#In the treatment of skeletal class Ⅲ malocclusion with microimplant anchorage, the sagittal diameter of the glossopharyngeal segment of the upper airway has a negative impact.
ABSTRACT
OBJECTIVE@#To assess the efficacy of bone anchorage and maxillary facemask protraction devices in treating skeletal class Ⅲ malocclusion in adolescents.@*METHODS@#Articles relating to the use of bone anchorage and maxillary facemask protraction devices for treating skeletal class Ⅲ malocclusion in adolescents were searched from the databases of Cochrane Library, PubMed, EmBase, CNKI, and Wanfang database. Several inclusion and exclusion criteria were developed for the article screening. The clinical data were extracted, and the quality of the selected articles was evaluated. A Meta-analysis of SNA, SNB, ANB, ANS-Me, Wits, and U1-PP change was performed by using RevMan 5.3.@*RESULTS@#Seven studies (264 patients) were included in the Meta-analysis. Among these studies, three were randomized controlled trials, and four were non-randomized controlled trials. Compared with the maxillary facemask protraction device group, the bone ancho-rage device group had higher SNA changes and lower ANS-Me, Wits, and U1-PP changes (P<0.05). No significant differences were observed in the SNB and ANB changes between these two groups.@*CONCLUSIONS@#Compared with the maxillary facemask protraction device, the bone anchorage device can increase the extent of protraction of the maxilla and has better controls for the labial inclination of the maxillary anterior teeth in treating skeletal class Ⅲ malocclusion among adolescents. However, additional high-quality randomized controlled trials must be performed to verify the results.
Subject(s)
Adolescent , Humans , Cephalometry , Extraoral Traction Appliances , Malocclusion, Angle Class III , Maxilla , Palatal Expansion TechniqueABSTRACT
OBJECTIVE@#This study aimed to investigate the therapeutic effects and advantages of skeletal class Ⅲ malocclusion treatment by transmission straight wire technique.@*METHODS@#Ninety-seven patients who received treatment for skeletal class Ⅲ malocclusion at the Department of Stomatology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology from January 2012 to January 2017 were selected for this retrospective study. All these patients refused surgery. They were divided into two groups in accordance with the type of skeletal malocclusion: mild-to-moderate skeletal malocclusion group (-4°≤ANB <0°) and severe skeletal malocclusion group (-8°≤ANB<-4°). Each of the two groups was divided further into two small groups in accordance with the technique used: T group (transmission straight wire technique) and M group (MBT technique).@*RESULTS@#The crossbite of all 59 patients in the mild-to-moderate skeletal malocclusion group was successfully treated. The molars were classified as classⅠrelationship, and the facial profile improved. Significant differences were found in the values of U1/SN angle, L1/MP angle, and Lip-Diff between the T and M groups before and after the treatment (P<0.05). The extent of incisor root resorption was lighter in the T group than in the M group (P<0.05). In the severe skeletal malocclusion group, the crossbite of all 38 patients was cured or partially cured. Fourteen patients showed severe lower anterior teeth inclination (five in the T group and nine in the M group), and the profiles did not significantly improve. Significant differences were observed in the values of U1-NA value, U1/SN angle, L1-NB value, L1/MP angle, LLP, and Lip-Diff between the T and M groups before and after the treatment (P<0.05). The extent of incisor root resorption was lighter in the T group than in the M group (P<0.05).@*CONCLUSIONS@#Relative to the MBT technique, the transmission straight wire technique has great advantages in improving facial profile, reducing the compensatory inclination of the upper and lower anterior teeth, and reducing the risk of root resorption in the treatment of skeletal class Ⅲ malocclusion.
Subject(s)
Humans , Cephalometry , Malocclusion , Malocclusion, Angle Class II , Malocclusion, Angle Class III , Maxilla , Retrospective StudiesABSTRACT
OBJECTIVE@#To investigate the effect of pre-surgical orthodontic treatment on temporomandibular joint (TMJ) in patients with skeletal class Ⅲ malocclusion treated with orthodontic-orthognathic surgical treatment.@*METHODS@#Twenty-four patients with skeletal class Ⅲ malocclusion who underwent orthodontic-orthognathic surgical treatment were included in the study. Before and after the completion of orthodontic treatment, the symptoms of TMJ were examined and recorded, and the short- and the long-axis diameter of the condylar (d), condylar height (h), joint space (L) at different angles, bilateral condylar spacing (R), and the condylar angles were measured, with scanning performed by using cone-beam computed tomography (CBCT). Then, the changes of TMJ symptoms and bone structure at different periods were analyzed.@*RESULTS@#No significant changes were observed in the joint symptoms before and after the pre-surgical orthodontic treatment. No significant changes were found in the measurements of the bone structure of TMJ in the dimensional direction (P>0.05).@*CONCLUSIONS@#In the orthodontic-orthognathic surgical treatment procedure, the pre-surgical orthodontic process does not have a significant effect on TMJ.
Subject(s)
Humans , Cone-Beam Computed Tomography , Malocclusion, Angle Class II , Malocclusion, Angle Class III , Mandibular Condyle , Temporomandibular JointABSTRACT
Objective To develop a Class Ⅲ twin-block magnetic orthopedic appliance (TMOA-Ⅲ) and to investigate the treatment effects of this appliance on skeletal Class Ⅲ malocclusion of mixed dentition and early permanent dentition.Methods The sample consisted of 76 Chinese children (42 males and 34 females,mean age 9.1 years) with Class Ⅲ malocclusion caused by maxillary retrognathism,and the subjects were divided into a treatment group and a control group.The treatment group,38 subjects (21 males and 17 females),were instructed to wear TMOA-Ⅲ for 5-8 months (mean 7.5 months) and the control group,38 subjects (21 males and 17 females),did not wear any appliance.Cephalometric radiographs were taken and measurement data were used for analysis.Results Compared with the control group,patients of the treatment group showed a favorable increase of maxilla length and anterior movement (PNS-A,P＜0.001;SNA,A-NPg,P＜0.05),and skeletal Class Ⅲ facial profiles improved (UL-EL,NsPgs-HL,Facial convexity,P ＜ 0.001;LL-EL P ＜ 0.005).Conclusions The results indicate that TMOA-Ⅲ is effective for the treatment of Class Ⅲ malocclusion caused by maxillary retrognathism in mixed dentition and early permanent dentition,which provides another choice for the treatment besides the face mask.
ABSTRACT
<p><b>OBJECTIVE</b>To evaluate vertical stability after various orthognathic surgical treatment plans for skeletal class Ⅲ malocclusion with anterior openbite.</p><p><b>METHODS</b>A retrospective multicenter cohort study was conducted to investigate vertical stability after various orthognathic surgical treatment plans for skeletal class Ⅲ malocclusion with anterior openbite. From 2010-2016, 122 patients from two domestic stomatological hospitals were included in our study. Patients were divided into four groups according to their treatment plans, namely, bilateral sagittal split ramus osteotomy (BSSRO), intraoral vertical ramus osteotomy (IVRO), BSSRO+Le Fort Ⅰ, and IVRO+Le Fort Ⅰ. All patients followed a standardized examination procedure at 6 and 24 months post-treatment. The observation indexes include overbite, mandibular plane angle, and intermaxillary angle.</p><p><b>RESULTS</b>1) The significantly reduced ratio of the overbite in the BSSRO+Le Fort Ⅰ and IVRO+Le Fort Ⅰ groups were less than the BSSRO and IVRO groups at 6 and 24 months post-treatment. 2) The significantly increased ratio of the mandibular plane in BSSRO+Le Fort Ⅰ and IVRO+Le Fort Ⅰ groups were less than BSSRO and IVRO groups at 6 and 24 months post-treatment. 3) The significantly increased ratio of the intermaxillary angles in BSSRO+Le Fort Ⅰ and IVRO+Le Fort Ⅰ groups were less than the BSSRO and IVRO groups at 6 months post-treatment, while there was no statistical difference at 24 months post-treatment.</p><p><b>CONCLUSIONS</b>Bimaxillary surgery (BSSRO+Le Fort Ⅰ and IVRO+Le Fort Ⅰ) is more effective than mandibular surgery to control vertical relapse.</p>
ABSTRACT
Objective:To evaluate volumetric changes in the upper airway after orthodontic-bimaxillary surgery for the treatment of skeletal class Ⅲ malocclusion.Methods:Literatures about volumetric changes in the upper airway after orthodontic-bimaxillary surgery for the treatment of skeletal class Ⅲ malocclusion were searched from the database:Cochrane library,Embase,PubMed,Web of Science,Wangfang,China Science and Technology Journal Database (VIP),Chinese Biomedical Medicine Database (CBM) and China National Knowledge Infrastructure(CNKI).All the literatures were evaluated by Newcastle-Ottawa Scale(NOS) and analyzed by RevMan 5.3.Results:9 studies with 204 cases about volumetric changes in the upper airway after orthodontic-bimaxillary surgery for the treatment of skeletal Ⅲ malocclusion were included.Meta-analysis showed that after treatment there was no statistical difference about the nasopharyngeal volume change and the total volume change(P＞0.05);there was statistically significant difference about oropharyngeal volume change (P＜0.05).Conclusion:It might be better to consider orthodontic-bimaxillary surgery for skeletal class Ⅲ malocclusion with certain risk factors about OSAHS,but there was still a risk of airway narrow after orthodontic-bimaxillary surgery for skeletal class Ⅲ malocclusion.
ABSTRACT
An adolescent patient,in the peak of growth and development,with severe skeletal Class Ⅲ malocclusion and maxillary impacted canines was treated by removable and fixed appliances in the upper and lower dental arches.After treatment,the crossbite was relieved,the facial contour was improved,the integrity of the denture was kept and the Class Ⅰ molar relationship was achieved.
ABSTRACT
Objective:To evaluate the clinical effect of distalizing mandibular dentition with micro-implant in patients with skeletal classⅢmalocclusion.Methods: In the study, 20 patients with skeletal class Ⅲmalocclusion were selected.They are consist of 8 males and 12 female with an age range from 16 to 38 years old and an average age of (21.5±5.6) years.They were treated with straight wire technique and the implant were inserted into the mandibular external oblique line to distlize the lower dentition to a class Ⅰmolar relationships.Cephalometrics films were taken before and after treatment.The changes of hard tissue and soft tissue were analyzed by evaluating 26 measurement measurements.Results: ClassⅠmolar relationships were achieved, and the profile were improved after treatment.ANB increased by(0.80±1.02)°,Wits increased by (1.67±1.74) mm,after treatment(P<0.05).The lower dentition were significantly retracted after treatment with L1-NB distance decreased by(2.64±1.50) mm, P<0.05;the mesial buccal cusp and mesial root of the lower first molars were retracted by (3.26±1.95) mm and (0.79±1.27) mm respectively (P<0.05);the mesial buccal cusp of the lower second molars were retracted by (3.06±1.80) mm (P<0.05).After treatment, mandibular teeth got up-righted distally.From incisors to molar, L1/MP, L5/MP, L6/MP, L7/MP angle decreased by(6.37±8.53)°, (10.59±8.50)°, (11.48±7.22)°, (15.72±7.16)°on average respectively (P<0.05), all of those changes had the statically significant effects.Soft tissue change after treatment, the distance from lower lip to esthetic plane were decreased by (1.70±1.59) mm on average (P<0.05).Conclusion: Distalizing mandibular dentition with micro-implant can get an satisfying result in patients with skeletal class Ⅲmalocclusion, the lower teeth were retracted by controlled tipping movement.
ABSTRACT
Objective To establish a mathematical model to describe the skeletal class Ⅲ malocclusion of patient dental and basal bone arch form, for providing a data reference and basis for further study. Methods Thirty-five patients with skeletal classⅢmalocclusion were selected in this study for computed tomography CBCT. The data of 3-D image were analyzed, and dental arch marker (Fa) and base bone arch marker (Ba) were determined. The reference plane was determined by least square method. Software Matlab 7.0 was used to calculate two-dimensional coordinate system. Based on this, a mathematical model was established to describe the dental and basal bone arch form and then to validate the mathematical model. Results (1) The mathematical model can be used to describe the dental arch form of skeletal classⅢmalocclusion, maxillary:Y=46.12 [1-(2X/70.99)2]1.052;mandibular:Y=39.16 [1-(2X/64.51)2]1.038. (2) The mathematical model can be used to describe the basal bone arch form of skeletal classⅢmalocclusion, maxillary:Y=43.14 [1-(2X/75.09)2]1.061;mandibular:Y=39.03 [1-(2X/60.63)2]1.021. (3) Fa was located at Ba labial side in the maxilla, the distance was positive. Fa was located at Ba lingual side in the mandibular, and the distance was negative. (4) The fitting correlation coefficient of beta-function curve and each tooth on the dental and basal bone arch of skeletal class Ⅲ malocclusion were greater than 0.7 (P<0.05). Conclusion In this study, the mathematical model can be used to describe the dental and basal bone arch form of the skeletal classⅢmalocclusion, which can guide further research.
ABSTRACT
An adult patient with skeletal crossbite and mandibular deviation was treated by mandibular molar distalization using micro-im-plant and intermaxillary traction.After treatment,the facial contour of the patient was improved,the Class Ⅰ molar and cuspid relationship was achieved.
ABSTRACT
[Abstract ] Objective The orthodontic-surgery is the most effective way to treat the severe skeletal class Ⅲmalocclusion,but the long-term stability is still disputed .The aim of this systematic review is to analyze the long-term stability of hard tissue of seriously skeletal Class Ⅲ malocclusion patients treated with orthodontic combined surgical treatment . Methods Literature were searched through the Cochrane Central Register of Controlled Trials , Cochrane Library, Medline via pubmed (1950-2014), EMBASE (1980-2014) and other foreign databases , and Chinese Biomedical Literature Database , China National Knowledge Infrastructure Database , VIP Database for Chinese Technical Periodicals , digital journal of Wan fang Data and so on .Unpublished conference papers and gray litera-tures were collected manually .The literatures consist of randomized controlled trials ( RCT) , quasi-randomized controlled trials and clini-cal case-control trial (CCT) were selected.Then meta analysis was performed for annexable literatures and qualitative description was performed for diverged documents . Results Five foreign articles and 1 Chinese article suitable for analysis were ultimately studied . All the studies were CCT and a total of 260 patients were involved in the present systematic review .Meta analysis showed that the SNA , SNB, ANB, MP SN and Y-axis did not change significantly during 3 years after operation (P>0.05) and a good skeletal class I facial types were maintained .The comparison results of MP-SN and Y-axis showed that there was no significant statistical difference and the mandibular plane angle maintained the relative stability .Meta analysis was not performed because of the different measurement methods of A, B, Pg and Ramus inclination , so the qualitative description was used .Point A and Ramus inclination remained relatively stable posi-tion, but point B and Pg had some replace compared with post-operative. Conclusion The orthodontic and surgical treatment for skeletal classⅢmalocclusion could keep the hard tissue relative stabil-ity except a little replace of the mandibular .
ABSTRACT
Objective To study the mandibular anterior alveolar morphological characteristics of skeletal ClassⅢmalocclusion patients by CT quantitative research , which can provide guidances and indications for clinical skeletal Class Ⅲmalocclusion treatment and prevent iatrogenic complications , such as rootabsorption. Method 25 skeletal Class Ⅲ malocclusion patients during thepostpubertal were selected , three-dimensionalspiralCTscanning was applied to measure cortical and cancellousbonethickness around 6 mandibular incisors for analyzing the relationship between the bone mass and its anatomyaround the mandibular incisors roots. Results (1) The bone thickness around the lower anterior homonym teeth was basically symmetric in the skeletal Class III malocclusion. The labial thickness is a little less than the lingual side , gradually thickening along the root apical direction; (2) The area of mandibular incisors was inhomogeneous , and the 1/2 regional cancellous bone thickness of mandibular incisors was often lacked. Conclusion (1) The synchronous compensation of the teeth and alveolar bone is the significant feature of the skeletal Class Ⅲ malocclusion. (2) The responding regions ofthe alveolar bone in the 1/3 labial-cervical and root-tip may be the sensitive areas during the orthodontic treatment.
ABSTRACT
Objective:To analyse the asymmetry of mandibular of adults with skeletal classⅢmalocclusion and mandibular deviation using cone-beam computerized tomography(CBCT).Methods:20 adults with skeletal classⅢmalocclusion and mandibular deviation (deviation group)and 20 adults with individual normal occlusion(normal group)were included.CBCT slices were taken for each sub-ject.INVIVO 5 software was used to make 3D reconstruction and location marks for line distance and volume measurements of mandi-ble and condyle.Results:The measurements of the mandibular ramus length,mandibular total length,hemi-mandibular volume, mandibular ramus volume,posterior part of mandibular body length,condylar unit length,angular unit length,body unit length and an-gular angle in deviation group were significantly different between 2 sides(P<0.05).Compared with the normal group,differences of the asymmetry of mandibular ramus length,mandibular total length,hemi-mandibular volume,mandibular ramus volume,posterior part of mandibular body length,angular angle,condylar unit length and body unit length between 2 sides in deviation group were sig-nificantly different(P<0.05).Conclusion:In adults with skeletal classⅢmalocclusion and mandibular deviation deviated condylar and mandibular ramus are smaller than those of the nondeviated;the posterior part of mandibular body is slightly asymmetric while the anterior part of mandibular body is almost symmetric.
ABSTRACT
Objective To investigate nasomaxlllary complex facial soft tissue changes after the treatment with maxillary protraction appliance with skeletal Class Ⅲ malocclusion with a retruded maxilla.Methods Thirty growing subjects with skeletal Class Ⅲ malocclusions with maxillary retrognathism were selected and treated by facial mask(male 15,female 15,with an average age of 10.5).They were given a maxillary protraction treatment with face mask for 6-8 months.Cephalometric measurements about nasomaxillary complex soft tissue changes were analyzed to draw the statistic conclusion.Results After maxillary protraction treatment,PraY,nasofrontal angle,As-Y,UL-Y,UL-E,S-Ns-Sn increased (P ＜ 0.01) ; M-Y increased (P ＜ 0.05) ; LL-E,PosY,nasolabial angle decreased (P ＜ 0.05).There were no significant differences in the Ns-Y and columella-tip angle.Conclusion After maxillary protraction treatment,nasomaxillary complex area becomes more marked.Both the nasomaxillary complex soft tissue and lower facial profile are dramatically improved.The combining effect of these two changes results in a more harmony profile.
ABSTRACT
Objective:To compare the efficacy of casting frame and traditional fixed maxillary protraction appliances in the correc-tion of skeletal Ⅲ malocclusion in mixed dentition.Methods:30 cases with Class Ⅲ malocclusion in mixed dentition were random-ly divided into 2 groups.Casting frame maxillary protraction appliance was applied in group 1 (1 5 cases)and traditional fixed maxil-lary protraction appliance in group 2(15 cases).X-ray cephalometric examination results before and after treatment,treatment time, and the number of visit in 2 groups were analyzed with SPSS 1 3.0.Results:The treatment time in group 1 and 2 was (7.03 ±1 .32) and (9.07 ±1 .31 )months(P <0.05),the number of visiting was (8.00 ±1 .46)and (10.47 ±1 .85)(P <0.05),the cephalomet-ric measurement change of △U1 -SN was (3.85 ±0.95)°and (5.25 ±0.95)°(P <0.05),respectively.Conclusion:Casting frame protraction appliance is an efficient and practical intraoral device,which can prevent anterior upper teeth inclined to labial.
ABSTRACT
Objective To evaluate the orthodontic effect of surgery on mixed dentition period class Ⅲ malocclusion and to investigate the effective therapeutic method of the skeletal class Ⅲ malocclusion.Methods A total of 20 patients aged 8.5 to 9.1 years with early mixed dentition class Ⅲ skeletal malocclusion.The treatment was divided into two phases.During the first phase,the entire stuffy group was treated with a bonded maxillary expansion and protraction.During the second phase,the entire study group received multiple loop edgewise arch wire (MEAW) treatment until an ideal occlusion relationship achieved.Comparison of the pre-and post-orthodontic treatment cephalometric radiographs had been done after maxillary protraction and MEAW were applied for patients.Results In the 20 patients after orthodontic treatment,Class Ⅲ skeletal facial profile was improved,the retraction of anterior teeth was obvious,and there were significant changes in dentition; the profile of soft tissue and satisfactory occlusion relationship were significantly improved,as compared with the changes between pre-treatment and post-treatment.Conclusions Skeletal Ⅲ malocclusion in early mixed dentition can be successfully treated.The results can be satisfied with improved class Ⅲ skeletal and molar relationship,high-angle and profile of soft tissue.
ABSTRACT
Objective: To investigate mandibular movement characteristics in patients with skeletal class Ⅲ malocclusion during chewing different foods. Methods: 14 skeletal class Ⅲ adult patients with mandibular asymmetry, 10 patients without mandibular asymmetry and 10 normal control cases were chosen to find out the different condylar and incisor movement area ratio based on the aid of ARCUSdigma mandibular moving track analysis system. Results: First,during chewing soft food, the condylar tracing length of skeletal class Ⅲ adult patients with mandibular asymmetry were significant different in sagittal and horizontal plane compared with the other two groups(P<0.05), while the incisor point trajectory difference was not statistically significant. Second, the condylar and incisor movement characteristic showed much more different among three samples during chewing brittle food(P<0.05). Third, in sagittal plane, the deflective condylar movement area ratio was significantly higher than that of the other two groups during chewing hand food(P<0.01). Conclusion: The mandibular movement in skeletal class Ⅲ adult patients are affected obviously by the shape and texture of food. Asymmetric lower mandible patients have a greater preponderance of this phenomenon.