Pharmaceutical cocrystals: A review of preparations, physicochemical properties and applications

Pharmaceutical cocrystals are multicomponent systems in which at least one component is an active pharmaceutical ingredient and the others are pharmaceutically acceptable ingredients. Cocrystallization of a drug substance with a coformer is a promising and emerging approach to improve the performance of pharmaceuticals, such as solubility, dissolution profile, pharmacokinetics and stability. This review article presents a comprehensive overview of pharmaceutical cocrystals, including preparation methods, physicochemical properties, and applications. Furthermore, some examples of drug cocrystals are highlighted to illustrate the effect of crystal structures on the various aspects of active pharmaceutical ingredients, such as physical stability, chemical stability, mechanical properties, optical properties, bioavailability, sustained release and therapeutic effect. This review will provide guidance for more efficient design and manufacture of pharmaceutical cocrystals with desired physicochemical properties and applications.

Progress on novel pediatric oral solid dosage forms / 中国药科大学学报

@#In China, the incidence of adverse reactions of drugs in children is twice that in adults; especially in the newborns, it is four times that in adults. The main reason is that the physiological characteristics of children are changing constantly due to that they are in a constant process of growth and development; while the pediatric medicines cannot meet the clinical needs of children in different age states. Accordingly, the development of pediatric medicines, especially oral solid preparations which are convenient for administration and storage, has attracted a lot of attention. This review introduced various pediatric oral solid dosage forms such as multiparticulates, orally disintegrating tablets(ODT)and chewable tablets. In addition, the efficient taste masking technology and accurate dose control were the further research directions for development of pediatric medicines, which would provide important theoretical references for studies on pediatric oral solid dosage forms in future.

Applications of USP apparatus 3 in assessing the in vitro release of solid oral dosage forms / Aplicações do aparelho USP 3 em avaliar a libertação in vitro de formas de dosagem orais sólidas

USP Apparatus 3 (reciprocating cylinder) is a very versatile device for the in vitro assessment of release characteristics of solid oral dosage forms, because it enables the product to be subjected to different dissolution media and agitation speeds in a single run. In this paper, a brief history and a description of this system are presented, along with its applications in the development of immediate and modified release products and in the simulation of fasted and fed states using biorelevant media. Furthermore, a comparison is made with the basket and paddle apparatus, especially highlighting the superior hydrodynamics of USP apparatus 3, since the results are not sensitive to factors such as the presence of sample collection probes or air bubbles in the dissolution medium...

USP aparato 3 (cilindros recíprocos) é um equipamento bastante versátil para a avaliação das características de liberação in vitro de formas farmacêuticas sólidas orais, pois permite que o produto seja submetido a diferentes meios de dissolução e condições de agitação, em um único ensaio. Neste trabalho, são apresentados um breve histórico e a descrição desse sistema, suas aplicações no desenvolvimento de produtos de liberação imediata e modificada, assim como sua utilização na simulação dos estados não alimentado e alimentado com o emprego de meios biorrelevantes. Além disso, uma comparação é estabelecida com o cesto e a pá, com destaque para a hidrodinâmica superior do USP aparato 3, que faz com que os resultados não sejam influenciados por fatores como o uso de sondas de coleta de amostras ou presença de bolhas de ar no meio de dissolução...

Preparation of pellets containing Pothomorphe umbellata extracts by extrusion-spheronization: improvement of 4-nerolidylcatechol photostability

Pothomorphe umbellata (L.) Miq., Piperaceae, has been extensively used in Brazilian folk medicine and it is well known for its strong antioxidant properties. However, its main active constituent, 4-nerolydilcatechol (4-NC), is sensitive to ultraviolet and visible light, which can limit the use of intermediate and final herbal preparations of this species. In the present work, coated multiparticulate solid dosage forms of P. umbellata were obtained with the purpose of increasing the stability of 4-NC. P. umbellata extract was used as a wetting liquid for the preparation of pellets by extrusion-spheronization. Pellets were coated in a fluidized bed by three different polymers (hydroxypropylmethylcellulose (HPMC), polyvynilpirrolidone K-30 (PVP-K30), and polyvinyl alcohol-polyethylene glycol graft-copolymer (PVAPEG)). 4-NC photostability was evaluated by an accelerated photostability protocol. Pellets showed a narrow size distribution and low friability. 4-NC photodegradation followed a second order degradation kinetics with similar k values for the percolate, uncoated pellets and HPMC coated pellets. Photoprotection was higher in pellets coated with PVP-K30 and PVA-PEG. PVA-PEG coated pellets with 6 and 9% weight gain resulted in a final concentration of 4-NC approximately cinco times higher than uncoated pellets or liquid extracts, suggesting the potential of this formulation as a multiparticulate solid dosage form for P. umbellata extracts.

Colonic delivery of film coated meloxicam tablets using natural polysaccharide polymer mixture.

Now days natural polysaccharides are extensively used for the development of solid dosage forms for delivery of drug to the colon. The objective of the present study was to develop a site-specific drug, single unit formulation allowing targeted drug release in the colon. Solid unit dosage forms were prepared using polysaccharides or synthetic polymer included xanthan gum, pectin, chitosan and Eudragit-E. Meloxicam was used as a model drug. The prepared tablets were enteric coated with Eudragit-S 100 to give protection in the stomach. The coated tablets were tested in-vitro for their suitability as colon specific drug delivery systems. The dissolution data so obtained illustrates that enteric coated tablets containing 3% chitosan as a binder, showed only 12.5% drug release in the first 5 h, which is the usual upper gastrointestinal transit time, whereas, tablets prepared using xanthan gum as binder, were unable to protect drug release under similar conditions. Solid formulations containing pectin as a binder formed time-dependent release formulations. 28% drug release was observed in the usual upper gastrointestinal tract conditions, when used in a concentration of 5.92% in the tablets.

Colonic delivery of film coated meloxicam tablets using natural polysaccharide polymer mixture.

Now days natural polysaccharides are extensively used for the development of solid dosage forms for delivery of drug to the colon. The objective of the present study was to develop a site-specific drug, single unit formulation allowing targeted drug release in the colon. Solid unit dosage forms were prepared using polysaccharides or synthetic polymer included xanthan gum, pectin, chitosan and Eudragit-E. Meloxicam was used as a model drug. The prepared tablets were enteric coated with Eudragit-S 100 to give protection in the stomach. The coated tablets were tested in-vitro for their suitability as colon specific drug delivery systems. The dissolution data so obtained illustrates that enteric coated tablets containing 3% chitosan as a binder, showed only 12.5% drug release in the first 5 h, which is the usual upper gastrointestinal transit time, whereas, tablets prepared using xanthan gum as binder, were unable to protect drug release under similar conditions. Solid formulations containing pectin as a binder formed time-dependent release formulations. 28% drug release was observed in the usual upper gastrointestinal tract conditions, when used in a concentration of 5.92% in the tablets.

Estudos de pré-formulação de cápsulas gelatinosas duras contendo formulação de extrato de Gymnema sylvestre em pó / Preformulation studies of Gymnema sylvestre extract powder formulation for hard gelatin capsules

Gymnema sylvestre extract (GSE) is a plant product widely used as an adjuvant in the treatment of diabetes mellitus and commercially available as a powder. Owing to its low flowability, the manufacturing of hard gelatin capsules containing GSE faces specific problems. The purpose of this study was to investigate the best excipient (starch, lactose or microcrystalline cellulose) for hard gelatin capsules containing GSE. The technological properties such us bulk density (ñâ); tapped density (ñt); inter-particle porosity (Ie); Carr index (CI); Hausner ratio (HR); loss on drying (%LOD) and particle size distribution (%Pf) of the various GSE mixtures were investigated with the aim of identifying the best excipient. The need for lubricants (talc/magnesium stearate) was also assessed. GSE was characterized as a fine powder with more than 50% of its particles between 0.149mm to 0.250mm; furthermore, CI=25.6%; RH=1.3 and Ie = 25.6% and, as expected with such properties, it showed poor flowability. All the excipients investigated were able to change the technological properties of GSE and the powder mixture containing microcrystalline cellulose gave the best results.

O extrato seco de Gymnema sylvestre (EGS) é um produto fitoterápico amplamente utilizado como adjuvante no tratamento da diabetes, sendo comercializado na forma de pó. O objetivo do presente estudo foi investigar a influência da adição de adjuvantes (amido, lactose ou celulose microcristalina) à formulação para a preparação de cápsulas gelatinosas duras contendo o EGS. As propriedades tecnológicas como densidade aparente (Da), densidade aparente de compactação (Dc), porosidade interparticulas (Ie), Índice de Carr (IC), Fator de Hausner (FH), perda por dessecação (PD%) e análise do tamanho de partículas (%Pf) das diferentes misturas preparadas foram investigadas com o objetivo de escolher o melhor excipiente. A necessidade de agentes lubrificantes (talco/estearato de magnésio) também foi avaliada. O EGS foi caracterizado como um pó fino, com mais de 50% do material particulado compreendido entre 0,149-0,250mm; IC=25,6%; FH=1,3 and Ie = 25,6%, o que justifica seu fluxo pobre. Todos os excipientes testados foram capazes de modificar as propriedades tecnológicas do EGS, sendo a mistura de pós que apresentou melhores resultados aquela obtida com a adição de celulose microcristalina.