Angle-closure glaucoma associated with vitreous prolapse after neodymium-doped yttrium-aluminum-garnet laser posterior capsulotomy

ABSTRACT Capsulotomy with neodymium-doped yttrium--aluminum-garnet (Nd:YAG) laser is an effective treatment for posterior capsule opacification following cataract surgery. A wide opening of the posterior capsule associated with the ruptured anterior hyaloid can cause anterior chamber vitreous prolapse. Two patients who developed angle-closure glaucoma associated with vitreous prolapse following Nd:YAG laser posterior capsulotomy were successfully treated with antiglaucoma medication and peripheral iridotomies. Patient identification for potential risk factors and a careful postoperative follow-up are essential to avoid these serious complications.

Long-term evaluation of the efficacy and safety of Nd:YAG laser vitreolysis for symptomatic vitreous foaters / Avaliação de longo prazo da eficácia e segurança da vitreólise com Nd:YAG laser para moscas volantes sintomáticas

ABSTRACT Purpose: This study aimed to evaluate the long-term safety and efficacy of neodymium-doped yttrium aluminum garnet (Nd:YAG) vitreolysis for symptomatic vitreous floaters as it remains a controversial procedure due to insufficient robust evidence in the literature for the maintenance of the results and absence of adverse effects. Methods: This is an observational extension to the previously presented prospective, randomized, double-blind clinical trial. Eight of thirteen subjects who underwent vitreolysis with YAG laser returned for a late reevaluation, 18 months after the procedure, to evaluate the efficacy and safety of the procedure. Results: All patients maintained the improvement in symptomatology noted after the procedure, with 25% showing complete improvement and a similar proportion (37.5%) reporting significant or partial improvement. Objective improvement in opacity was similar to that found at 6 months follow-up. The NEI-VFQ 25 quality of life questionnaire showed no statistically significant difference in responses between the 6th and 18th month. No adverse effects were noted on clinical examination or reported by patients. Conclusion: Vitreolysis efficacy observed at 6 months of follow-up was maintained until the eighteenth month, with all patients reporting improvement from the pre-procedure state. No late adverse effects were noted. A larger randomized clinical trial is needed to confirm the safety of the procedure.

RESUMO Objetivos: Avaliar a segurança e eficácia a longo prazo da vitreólise com Nd:YAG laser para moscas volantes sintomáticas, uma vez que permanece como um procedimento controverso devido a falta de evidência científica robusta sobre a manutenção dos resultados e ocorrência de efeitos adversos. Métodos: Este estudo é uma extensão observacional de um ensaio clínico prospectivo, randomizado, duplo cego, previamente publicado. Oito de treze pacientes que foram submetidos a vitreólise com YAG laser foram acompanhados para uma reavaliação tardia, dezoito meses após o procedimento, para avaliar a eficácia e segurança do procedimento. Resultados: Todos os pacientes mantiveram a melhora na sintomatologia notada ao final do procedimento original, com 25% dos casos apresentando melhora completa, e uma proporção semelhante (37,5%) demonstrando melhora significativa ou parcial. A melhora objetiva na opacidade foi similar ao achado no seguimento original de 6 meses. O questionário de qualidade de vida NEI-VFQ 25 não demonstrou diferença estatisticamente significativa nas respostas entre o sexto e o décimo oitavo mês de acompanhamento. Nenhum efeito adverso foi notado no exame clínico ou reportado pelos pacientes. Conclusão: A eficácia da vitreólise observada ao sexto mês do acompanhamento foi mantida até o décimo oitavo mês, com todos os pacientes notando algum grau de melhora quando comparado ao estado pré procedimento. Nenhum efeito adverso tardio foi notado. Um ensaio clínico randomizado maior é necessário para confirmar a segurança do procedimento.

Predictors of early catheter replacement after HoLEP. Results from a high-volume laser center

ABSTRACT Introduction: The aim of the study was to investigate clinical and surgical factors associated with early catheter replacement in patients treated with Holmium Laser Enucleation of the Prostate (HoLEP). Materials and Methods: Data of patients treated with HoLEP at our Institution by a single surgeon from March 2017 to January 2021 were collected. Preoperative variables, including non-invasive uroflowmetry and abdominal ultrasonography (US), were recorded. Bladder wall modifications (BWM) at preoperative US were defined as the presence of single or multiple bladder diverticula or bladder wall thickening ≥5 mm. Clinical symptoms were assessed using validated questionnaires. Only events occurred within the first week after catheter removal were considered. Results: Overall, 305 patients were included, of which 46 (15.1%) experienced early catheter replacement. Maintenance of anticoagulants/antiplatelets (AC/AP) therapy at surgery (p=0.001), indwelling urinary catheter (p=0.02) and the presence of BWM (p=0.001) were more frequently reported in patients needing postoperative re-catheterization. Intraoperative complications (p=0.02) and median lasing time (p=0.02) were significantly higher in this group. At univariate analysis, indwelling urinary catheter (p=0.02), BWM (p=0.01), ongoing AC/AP therapy (p=0.01) and intraoperative complications (p=0.01) were significantly associated with early catheter replacement. At multivariate analysis, indwelling urinary catheter (OR: 1.28; p=0.02), BWM (OR: 2.87; p=0.001), and AC/AP therapy (OR: 2.21; p=0.01) were confirmed as independent predictors of catheter replacement. Conclusions: In our experience the presence of indwelling urinary catheter before surgery, BWM and the maintenance of AC/AP therapy were shown to be independent predictors of early catheter replacement after HoLEP.

Histological artifacts associated with laser and electroscalpel gingivectomy: Case series / Artefactos histológicos asociados a gingivectomía con láser y electrobisturí: serie de casos

Introduction. Over time, efforts have been invested in the design of new instruments that overcome the disadvantages of the gold standard instrument in surgery, the scalpel. As a result, electronic equipment has emerged such as the electric scalpel and laser devices. The available evidence on these instruments suggests that the tissue response is related to each instrument's physical and biological cutting principles. Objective. To compare the histological changes in gingiva samples associated with surgical cutting performed with a 940 nm diode laser, a 2780 nm erbium, chromium: yttriumscandium-gallium-garnet (Er,Cr:YSGG) laser, and an electric scalpel, by presenting a series of cases. Case presentation. We present three cases of healthy patients undergoing cosmetic surgery. The clinical examination revealed exposure of a keratinized gingiva band greater than 4 mm, normal color and texture in gingival tissue, with a firm consistency and no bleeding on periodontal probing. Gingivectomy was indicated with the following protocols: Diode laser of 940 nm at 1 W, in continuous mode; Er,Cr:YSGG laser of 2780 nm at 2.5 W, 75 Hz, H mode, air 20, water 40, gold tip MT4); and electric scalpel in cutting mode at power level four. Gingival tissue samples were taken and stored in 10% formaldehyde for histological analysis. Conclusion. All the evaluated cutting instruments generated histological changes produced by the thermal effect, the main ones being collagen coagulation and carbonization. The depth of thermal damage caused by the 2780 nm Er,Cr:YSGG laser was much lesser than that induced by the electric scalpel and the 940 nm diode laser.

Introducción. Históricamente se ha invertido esfuerzo en el diseño de nuevos instrumentos que superen las desventajas del estándar de referencia en cirugía, el bisturí. Como consecuencia de esto, han surgido equipos electrónicos como el electrobisturí y los diferentes dispositivos de tecnología láser. La información disponible sobre estos instrumentos sugiere que la respuesta del tejido intervenido está influenciada por los principios físicos y biológicos de corte del instrumento. Objetivo. Comparar los cambios histológicos en muestras de encía asociados al corte quirúrgico realizado con láser de diodo de 940 nm, láser de erbio, cromo: itrio-escandio-galio-granate (Er,Cr:YSGG) (2780nm) y electrobisturí mediante una presentación de serie de casos. Presentación de los casos. Se presentan tres casos de pacientes sanos sometidos a cirugía estética. El examen clínico reveló la exposición de una banda gingival queratinizada mayor de 4 mm, tejido gingival de color y textura normales, de consistencia firme y sin sangrado al sondaje periodontal. Se indicó gingivectomía con los siguientes protocolos: láser de diodo de 940 nm a 1 W, en modo continuo; láser de Er,Cr:YSGG de 2780 nm a 2,5 W, 75 Hz, modo H, aire 20, agua 40, punta de oro MT4; y bisturí eléctrico en modo de corte, a nivel de potencia cuatro. Se tomaron muestras de tejido gingival y se almacenaron en formaldehído al 10 % para su análisis histológico. Conclusión. Los tres instrumentos de corte generaron cambios histológicos producidos por el efecto térmico; los principales fueron coagulación del colágeno y carbonización. La profundización del daño térmico causada por el láser de Er,Cr:YSGG de 2780 nm fue mucho menor que la generada por el electrobisturí y por el láser de diodo de 940 nm.

Preliminary results of a new surgical technique: bladder mucosal graft harvested with holmium:YAG (HO:YAG) laser. A new option in bulbar replacement urethroplasty?

ABSTRACT Objective: To describe the technique of transurethral harvesting of bladder mucosal graft using the Holmium:YAG (Ho-YAG) laser and describe the preliminary results from 7 cases where this graft was used for urethroplasty. Materials and Methods: We performed a single-stage dorsal onlay urethroplasty using bladder mucosal graft in 7 patients with anterior urethral stricture. Transurethral harvesting was performed with the Ho-YAG laser. We performed a prospective and descriptive analysis with uroflowmetry performed at 30, 90 and 180 days after surgery and applied the PROM translated into Portuguese before and 6 months after urethroplasty. Results: Seven patients were included, 2 (28.5%) with penile urethral stricture, and 5 (71.5%) with bulbar urethral stricture. Mean stricture length was 50mm (range 35-60mm). Stricture etiology was trauma in 3 (42.9%) patients, iatrogenic in 1 (14.3%) patient, and idiopathic in 3 (42.9%) patients. Two patients (28.6%) had previously undergone ventral buccal mucosa urethroplasty. Mean bladder mucosal graft length was 52.86mm (± 13.801), and mean harvest time was 46.43min (± 14.639). Dorsal onlay urethroplasty using bladder mucosa was successfully completed in 5 patients (71.4%). Two patients (28.6%) couldn't have the procedure completed using bladder mucosa, one due to thermal damage of the graft during harvesting, and one due to insufficient graft length. In both cases the procedure was completed using buccal mucosa. Two patients (28.6%) experienced minor hematuria between the twelfth and eighteenth postoperative day, but neither required hospitalization and/or additional procedures. All patients achieved normalization of peak flow, and this was maintained throughout the follow-up period. Mean peak flow was 17.8 ml/s (± 3.271) at 30 days, 20.6 ml/s (± 5.413) at 90 days, and 19.6 ml/s (± 8.019) 180 days. Mean IPSS score decreased from 19.3 to 5.4. Similar improvements were also seen in the ICIQ-MLUTS Score (a mean drop from 3.8 to 2.0) and Peeling's Voiding Picture Score (a mean drop from 4.0 to 2.2). Quality of Life improved post urethroplasty, with increases in EQ-5D (from 0.6371 to 0.7285) and EQ-VAS (from 58.0 to 84.0). Conclusion: Transurethral harvesting of bladder mucosa using the Holmium laser (Ho-YAG) is feasible and reproducible. Our preliminary experience suggests that bladder mucosa grafts achieve comparable results to other grafts when used for dorsal onlay urethroplasty. Further research is needed to confirm these results.

Adaptación marginal e interna de cofias fabricadas por métodos convencionales, CAD/CAM de fresado y sinterizado por láser / Marginal and internal adaptation of copings manufactured by conventional methods, CAD/CAM milling and laser sintering

Introducción: la adaptación marginal e interna de nuestras restauraciones fabricadas por fundición sistemas de fresado y sinterización láser es uno de los factores clínicos más importantes para el éxito de las prótesis fijas, previniendo el riesgo de microfiltración y enfermedad periodontal. Objetivo: evaluar la adaptación marginal e interna de cofias metálicas en aleación Cr-Co confeccionadas por técnicas convencionales, CAD/ CAM de fresado y sinterizado por láser. Material y métodos: estudio de tipo experimental, comparativo e in vitro. Se imprimió un modelo maestro en Cr-Co, proveniente del escaneo de un premolar preparado para corona completa, sobre el cual se diseñaron 30 cofias divididas en tres grupos: el primero que corresponde al grupo cofias fundidas fresadas en disco de cera A (A = 10), el segundo grupo cofias fresadas en disco de metal presinterizado B (B = 10) y el tercer grupo cofias impresas por sinterización láser C (C = 10). Se empleó la réplica de silicona, colocando silicona al interior de cada cofia, sobre el modelo maestro, simulando al cemento, mediante una máquina de ensayo universal se realizó una compresión de 50 N. Luego de retirar cada cofia se rellenaron con silicona pesada de adición, obteniendo una réplica de silicona. Se efectuaron dos cortes transversales en sentido vestíbulolingual y mesiodistal. Se observó el espesor de silicona VPS (vinil poliéter silicona) mediante un estereomicroscopio (Nikon SMZ745T), obteniendo valores en micrómetros. Para el análisis estadístico se utilizó el software SPSS 25 con el fin de realizar la prueba de normalidad y ANOVA de dos vías bajo un nivel de confianza del 95%. Resultados: el menor gap lo obtuvo el grupo de fresadas, seguido de las impresas y por último las fundidas por métodos convencionales. ANOVA de dos vías reveló diferencias estadísticamente significativas entre los tres grupos (p < 0.0001). Conclusiones: se encontró que el gap varía con cada método de fabricación, la técnica convencional de fundido mostró un mayor gap, ninguna excediendo el rango clínicamente aceptable (AU)

Introduction: the marginal and internal adaptation of our restorations manufactured by casting, milling systems and laser sintering is one of the most important clinical factors for the success of fixed prostheses, preventing the risk of microleakage and periodontal disease. Objective: evaluate the marginal and internal adaptation of metal copings in Cr-Co alloy made by conventional techniques, CAD/CAM milling and laser sintering. Material and methods: an experimental, comparative and in vitro study, a Cr-Co master model was printed from the scan of a premolar prepared for a full crown. An experimental, comparative and in vitro study, a Cr-Co master model was printed from the scan of a premolar prepared for a full crown, on which 30 caps divided into three groups were designed; the first group corresponds to the cast copings milled on a wax disc A (A = 10), the second group milled copings on a presintered metal disc B (B = 10) and the third group printed by laser sintering copings C (C = 10). The silicone replica was used, placing silicone inside each coping, on the master model, simulating cement, using a universal testing machine, a 50 N compression was performed. After removing each coping, they were filled with heavy addition silicone, obtaining a silicone replica. Two cross-sections were made in the buccolingual and mesiodistal direction., observing the thickness of the VPS (vinyl polyeter silicone) silicone using a stereomicroscope (Nikon SMZ745T), obtaining values in micrometers. For the statistical analysis, the SPSS 25 software was used in order to perform the normality and two-way ANOVA tests under a 95% confidence level. Results: the smallest gap was obtained by the milled group, followed by the printed ones and finally those cast by conventional methods. Two-way ANOVA revealed statistically significant differences between the three groups (p < 0.0001). Conclusions: the gap was found to vary with each fabrication method, the conventional casting technique showed a larger gap, none exceeding the clinically acceptable range (AU)

Solid-state properties of pink clay from Jequitinhonha Valley in Brazil for pre-formulation study

Abstract Clay minerals are still widely used in pharmaceutical products for human health and cosmetic purposes. Pre-formulation studies were conducted to identify solid-state properties of pink clay, a sample from Diamantina, Brazil. Among the solid properties to be analyzed, we have selected type identification, iron phases, crystallinity, powder flow characteristics, thermal behavior, and non-isothermal phase transition kinetics. The pink clay is composed of (1:1) clay type and kaolinite as the main component. The Mössbauer spectrum of pink clay shows Fe3+(α-Fe2O3) Clay minerals are still widely used in pharmaceutical products for human health and cosmetic purposes. Pre-formulation studies were conducted to identify solid-state properties of pink clay, a sample from Diamantina, Brazil. Among the solid properties to be analyzed, we have selected type identification, iron phases, crystallinity, powder flow characteristics, thermal behavior, and non-isothermal phase transition kinetics. The pink clay is composed of (1:1) clay type and kaolinite as the main component. The Mössbauer spectrum of pink clay shows Fe3+(α-Fe2O3) hematite, Fe2+, and Fe3+ with large Δ/2ξq of about 2.80 and 2.69 mm.s-1 respectively, related to iron silicates, most likely pyroxene, and a superparamagnetic Fe3+. Pink clay exhibits poor flow properties. The thermal behavior indicates a phase-transition between 400 - 600 ºC associated with the dehydroxylation of the pink clay system requiring ~300 kJ mol-1, being constant until the process reaches a conversion of ~50% when the energy is enhanced to ~530 kJ mol-1, concluding the whole dehydroxylation process (α=80%). Solid-state properties and characteristics found for the pink clay must be considered for the proper design of formulations. This type of clay shows unique pharmaceutical properties that can be favorably exploited by the cosmetic industry

Efficacy of laparoscopic choledochoscopy combined with holmium laser lithotripsy versus traditional laparotomy in treatment of bile duct stones： A Meta－analysis / 临床肝胆病杂志

ObjectiveTo systematically review the efficacy and safety of laparoscopic choledochoscopy combined with holmium laser lithotripsy through a meta－analysis. MethodsThis study was conducted based on PRISMA guidelines， with a PROSPERO registration number of CRD42023406221. Chinese databases including CNKI， Wanfang Data， and VIP and foreign language databases such as PubMed， Embase， the Cochrane Library， and Web of Science were searched for original articles on traditional laparotomy versus laparoscopic choledochoscopy combined with holmium laser lithotripsy in the treatment of bile duct stones. Dichotomous variables were assessed by odds ratio （OR） and 95% confidence interval （CI）， while continuous variables were assessed by weighted mean difference （WMD） and 95%CI， and a sensitivity analysis was performed for outcome measures with relatively high heterogeneity. The Begg test and Egger test were used to evaluate publication bias. Stata 15.0 and Review Manager 5.3 were used to perform the statistical analysis. ResultsA total of 26 retrospective studies from China were included in this study， with 2 238 patients in total. The meta－analysis showed that compared with traditional laparotomy for the treatment of bile duct stones， laparoscopic choledochoscopy combined with holmium laser lithotripsy had significantly shorter time of operation （WMD＝－1.26， 95%CI： －1.36 to －1.16， P<0.001）， length of hospital stay （WMD＝－1.93， 95%CI： －2.64 to －1.12， P <0.001）， and time to bowel function recovery （WMD＝－1.52， 95%CI： －1.68 to －1.35， P<0.001）， significantly less intraoperative blood loss （WMD＝－1.79， 95%CI： －1.93 to －1.66， P<0.001）， a significantly lower rate of intraoperative residual stone （OR＝0.15， 95%CI： 0.11－0.20， P<0.001）， and significantly fewer complications （OR＝0.17， 95%CI： 0.13－0.23， P<0.001）. ConclusionCompared with traditional laparotomy， laparoscopic choledochoscopy combined with holmium laser lithotripsy shows better efficacy in the treatment of bile duct stones.

Response of dental pulp capped with calcium-silicate based material, calcium hydroxide and adhesive resin in rabbit teeth

Direct pulp capping induces a local inflammatory process. Several biomaterials have been used for this procedure. The aim of this study was to compare the dentinal bridge thickness using three different pulp capping biomaterials with the conventional technique (high speed diamond bur) or Er-Yag laser, 1 month after pulp effraction. Materials and Methods: Forty two Class V cavities were prepared on the buccal surface of 4 maxillary incisors and 2 mandibular incisors of New Zealand rabbits. Specimens were divided into 6 treatment groups. Teeth were treated with: In Group 1: Er-Yag laser and Biodentine® (Septodont), in Group 2: Er: Yag laser and calcium hydroxide (Dycal® Dentsply), in Group 3: Er: Yag laser and adhesive system (Prime& Bond® NT Dentsply), in Group 4: high speed diamond bur and Biodentine® (Septodont), in Group 5: high speed diamond bur and calcium hydroxide (Dycal® Dentsply), and in Group 6: high speed diamond bur and adhesive system (Prime& Bond® NT Dentsply). The preparation was done with copious irrigation. The animals were sacrificed at 30 days and the teeth were extracted and prepared for histological analysis. Results: In the group of « laser Er-Yag ¼, iatrogenic pulpal wounds treated with Biodentine® were covered with a thick hard tissue barrier after 1 month. The difference was not significant with the groups of Dycal® used with Er: Yag laser and high speed diamond bur. Prime& Bond® NT Dentsply specimens showed a thin dentinal bridge layer. Conclusion: At 1 month, Er-Yag laser proved to be useful with Biodentine® for direct pulp capping procedures

Transurethral flexible ureteroscopic incision and drainage with holmium laser in the treatment of parapelvic renal cysts: A retrospective study

ABSTRACT Background: We aimed to investigate the clinical efficacy and safety of transurethral flexible ureteroscopic incision and drainage with holmium laser in the treatment of parapelvic renal cysts. Materials and Methods: Between October 2017 and April 2021, the clinical data of 65 patients with parapelvic renal cysts were evaluated retrospectively. Thirty-one patients with parapelvic cysts (Group 1) underwent a transurethral flexible ureteroscopic incision and drainage with a holmium laser, whereas the other 34 patients (Group 2) underwent retroperitoneal laparoscopic unroofing. The patients' clinical features were documented. The surgery time, intraoperative blood loss, hospitalization time, complications and cyst size were recorded and statistically assessed one year following the procedure. Results: All of the patients were successfully treated with flexible ureteroscopic incision and drainage or retroperitoneal laparoscopic unroofing. In terms of clinical parameters, such as age, gender, BMI, location, cyst size, and Bosniak classification of renal cysts, no statistically significant difference was detected between Groups 1 and 2. Compared to the control group (Group 2), Group 1 demonstrated a shorter surgery duration, less intraoperative blood loss, and a shorter hospital stay (p < 0.001). However, no significant differences in complications and cyst size were observed between the two groups one year after the surgery (p > 0.05). Conclusions: Transurethral flexible ureteroscopic incision and drainage with holmium laser in the treatment of parapelvic renal cysts has obvious advantages over traditional surgery, and is worthy of advancement and application, but its long-term effect needs further follow-up studies.

Trametes versicolor (L.) Lloyd as a source of thermostable serine protease: production and characterization

Proteases are ubiquitously present and are among the largest groups of commercially important enzymes. Here, we investigated a wood-rot basidiomycete Trametes versicolor (L.) Lloyd [Syn. Coriolus versicolor (L.) Quél.; Polyporus versicolor (L.) Fr.] as a source of the enzyme serine protease, its production, and optimized to obtain a higher yield of the enzyme.. The significant variables with optimized values for maximum production of the enzyme were temperature (30?C), incubation time (120 h) and wheat bran (10 g). The yield increased by 30.76% by statistically optimizing the media. The optimized temperature and pH for the maximum protease activity was 50?C and pH 7.0, respectively. The enzyme was purified through ion exchange (using DEAE cellulose 52 resin) and gel filtration chromatography (using Superdex 200 column). The purified enzyme had a retention time of 7 min in RP-HPLC. The enzyme was stable at a broad range of temperature (30-60?C) and pH (5.0-8.0) with a half-life of 58.72 min, Vmax of 37.17 ?M min/mL and Km of 0.657 mg/mL. Its activity was enhanced by Na+, Ca2+, Mg2+ ions and SDS surfactant. These properties make this enzyme a valuable candidate for industrial applications

Production of Fungal Pectin Lyase and Polygalacturonase from Fruit Wastes by Solid State Fermentation

Polygalacturonase (PG or PGase) and Pectin lyase (PL) are depolymerase enzymes that split the ?-1, 4-glycosidic linkages in the backbone of homogalacturonans. They are produced by microorganisms degrading pectin-containing substrates. PG and PL were produced in the solid-state fermentation (SSF) of beans testa (BT), mango peels (MP), Plantain peels (PP), and BT: MP: PP (1:1:1). Substrates were seeded with individual fungal strains namely Aspergillus tamarii, Aspergillus terreus, Aspergillus piperis, Aspergillus parasiticus and Mucor piriformis. PG production ranged from 0.0377 - 141.0095 U/g with A. tamarii, A. terreus and A. piperis producing the highest on mango peels. PL production ranged from 50.50 - 10,852.50 U/g with Mucor piriformis producing the highest on plantain peels. The pH of the fermentation medium changed during growth, metabolism, and pectinase production. The best pH for pectinase production falls within the acidic range. Unconventional substrates such as PP are viable for pectinase production, and PL yield in SSF is improved by compositing substrates.

The relationships among Flory-Huggins specific interaction parameters, maximum amorphous capacity, and solid-state interactions of spray dried amorphous drug dispersions with conventional and novel pharmaceutical polymers / Las relaciones entre los parámetros de interacción específicos de Flry-Huggins, la capacidad amorfa máxima y las interacciones en estado sólido de las dispersiones de fármacos amorfos secados por aspersión con polímeros farmacéuticos convencionales y nuevos

This study evaluated the specific interactions between drug and polymers in amorphous spray dried dispersions (SDDs). Four Biopharmaceutics Classification System (BCS) II class drugs were evaluated. Binary and ternary SDDs were manufactured with conventional polymers and arabinogalactan. Specific interaction parameters between drug and polymer were determined using theoretical calculations and DSC data. Analytical methods were used to evaluate solid and solution state interactions. Maximum amorphous content for each formulation was calculated using DSC. Flory-Huggins Specific Interaction Parameters were calculated. Negative specific parameters were associated with solid-state interactions and improved capacity of drug in the amorphous state. Ternary SDDs containing drug, polymer, and arabinogalactan displayed similar hydrogen bonding as was observed with binary SDDs. Solution-state interactions observed in binary systems may be used in tertiary systems to improve the amorphous drug capacity and improved dissolution compared to the binary. The resultant tertiary systems are an improvement over binary drug polymer systems.

Este estudio evaluó las interacciones específicas entre el fármaco y los polímeros en dispersiones amorfas secadas por pulverización (SDD). Se evaluaron cuatro fármacos de clase II del Sistema de Clasificación Biofarmacéutica (BCS). Los SDD binarios y ternarios se fabricaron con polímeros convencionales y arabinogalactano. Los parámetros de interacción específicos entre el fármaco y el polímero se determinaron utilizando cálculos teóricos y datos de DSC. Se utilizaron métodos analíticos para evaluar las interacciones del estado sólido y de la solución. El contenido amorfo máximo para cada formulación se calculó usando DSC. Se calcularon los parámetros de interacción específicos de Flory-Huggins. Los parámetros específicos negativos se asociaron con interacciones en estado sólido y una capacidad mejorada del fármaco en el estado amorfo. Los SDD ternarios que contienen fármaco, polímero y arabinogalactano mostraron enlaces de hidrógeno similares a los observados con los SDD binarios. Las interacciones de estado de solución observadas en sistemas binarios pueden usarse en sistemas terciarios para mejorar la capacidad del fármaco amorfo y mejorar la disolución en comparación con el binario. Los sistemas terciarios resultantes son una mejora con respecto a los sistemas de polímeros de fármacos binarios.

Efficacy of mitomycin C in modified transcanalicular diode laser dacryocystorhinostomy / Eficácia da mitomicina C na dacriocistorrinostomia transcanalicular com laser diodo modificada

ABSTRACT Objective: To evaluate the efficacy of mitomycin C in anatomical and functional success after modified transcanalicular diode laser dacryocystorhinostomy. Methods: A prospective, double-blinded, randomized placebo-controlled study compared the effect of topical mitomycin C on modified transcanalicular diode laser dacryocystorhinostomy. Group 1 had modified transcanalicular diode laser dacryocystorhinostomy with topical saline, while Group 2 had modified transcanalicular diode laser dacryocystorhinostomy with topical mitomycin C. Success was defined as anatomical patency and relief of symptoms at the end of 6 months. Results: Six months after surgery, Group 1 (30 patients) showed anatomical and functional success rates of 86.7% and 83.3%, respectively. Group 2 (32 patients) showed anatomical and functional success rates of 87.5% and 84.3%, respectively. There was no statistically significant difference between the groups 1 and 2 (p = 1.000). Conclusion: The use of mitomycin C did not improve the anatomical and functional success rates of modified transcanalicular diode laser dacryocystorhinostomy compared to placebo.

RESUMO Objetivo: Avaliar a eficácia da mitomicina C no sucesso anatômico e funcional após dacriocistorrinostomia transcanalicular com laser de diodo. Métodos: Estudo prospectivo, duplo-cego, randomizado e controlado por placebo. Comparou o efeito da mitomicina C tópica na dacriocistorrinostomia transcanalicular com laser de diodo. No Grupo 1, foi utilizada apenas solução salina tópica, enquanto no Grupo 2 foi utilizada mitomicina C tópica. O sucesso foi definido como permeabilidade da via lacrimal e alívio dos sintomas ao final de 6 meses. Resultados: Seis meses após a cirurgia, o Grupo 1 (30 pacientes) apresentou taxas de sucesso anatômico e funcional de 86,7% e 83,3%, respectivamente. O Grupo 2 (32 pacientes) apresentou taxas de sucesso anatômico e funcional de 87,5% e 84,3%, respectivamente. Não houve diferença estatística significante entre os Grupos 1 e 2 (p=1,000). Conclusão: O uso de mitomicina C não melhora as taxas de sucesso anatômico e funcional do dacriocistorrinostomia transcanalicular com laser de diodo em comparação ao placebo.

Emericella nidulans (4DP5), Cladosporium herbarum (7DF12) and Bacillus subtilis improve the nutritional value of palm kernel cake (PKC) through solid-state fermentation (SSF)

Aims@#Palm kernel cake (PKC) is a high-protein, high-energy food that is widely utilized in the animal feed business. However, the high fibre and limited amino acid content of untreated PKC were the main issues for it to be used as animal feed, particularly in non-ruminants. To improve the quality of PKC, this study combined the use of solid-state fermentation (SSF) and consortia of fungi and bacteria to treat the PKC.@*Methodology and results@#Two fungi, Emericella nidulans (4DP5) and Cladosporium herbarum (7DF12) and three strains of bacteria, Bacillus subtilis, which were active mannanase producers, were used in different combinations to reduce the hemicellulose content and improve the crude protein content of PKC in a lab-scale solid-state fermentation. PKC inoculated separately with five types of mixed culture treatments were allowed to ferment. The fermentation conditions were 20% inoculum (w/v), 85-92% humidity, pH 7.0 and PKC particle size 0.8 mm. PKC treatments with two fungi, E. nidulans (4DP5) and C. herbarum (7DF12), as well as a fungus-bacterium combination, E. nidulans (4DP5) and B. subtilis, outperformed the other three treatments. The crude protein levels were increased by 3.34% and 1.86%, respectively, due to these treatments. Furthermore, the level of aflatoxins produced increased marginally but remained within the permissible limits.@*Conclusion, significance and impact of study@#The treated PKC has more sugar and crude protein and less than 20 parts per billion (ppb) of aflatoxin, making it appropriate for animal consumption. The SSF technique of combining fungi and Bacilli enhanced the nutritional and market value of PKC substantially, which can be upscaled.

The effect of Er: yttrium aluminum garnet laser irrigation on the root canal smear layer and root canal microhardness / 中华老年医学杂志

Objective:To examine the effects of different endodontic irrigation methods on root canal morphology.Methods:We collected 20 extracted single-root premolars from elderly patients(≥60 years)with periodontitis and randomly divided them into 5 groups.Group A: syringe irrigation; Group B: P5 ultrasonic irrigation, Group C: 0.20 W Er: yttrium aluminum garnet(YAG)laser irrigation; Group D: 0.30 W Er: YAG laser irrigation; and Group E; 0.35 W Er: YAG laser irrigation.Changes in the smear layer in the root canal and the hardness of the root canal were assessed.Results:After treatment with different root canal cleaning methods, the scores of smear layer removal for Groups A, B, C, D and E were(4.67±0.27), (3.08±0.57), (2.83±0.43), (1.17±0.19)and(2.87±0.50), respectively.There were statistically significant differences between them( F=35.946, P<0.01). Among them, Group B, C, D and E had better smear layer removal than Group A, and the differences were statistically significant(all P<0.01). Group D had better removal of the smear layer than Groups B, C and E, and the differences were statistically significant( P<0.01); Values for dentin microhardness of Groups A, B, C, D and E were(58.98±5.54), (55.19±5.71), (56.04±3.96), (66.65±3.23)and(45.68±7.58), respectively, with statistically significant differences( F=5.83, P<0.05), and for laser-based irrigation, the value for dentin microhardness of Group D was higher than those of groups C and B(all P<0.05). Conclusions:Laser-based root canal irrigation is better than traditional irrigation methods, with 0.30 W Er: YAG laser achieving maximal removal of the smear layer and at the same time having the least impact on root canal hardness.

Effect of 1 064-nm Q-switched Nd:YAG laser on cell viability, protease activity and structures of Malassezia furfur / 中华皮肤科杂志

Objective:To investigate the effect of 1 064-nm Q-switched Nd:YAG laser at different energy settings on cell viability, protease activity and structures of Malassezia furfur. Methods:Cultured standard strains of Malassezia furfur were divided into several groups to be irradiated with 1 064-nm Q-switched Nd:YAG laser at different energies of 0 (control group) , 500, 600, 700, 800 and 900 mJ, respectively. Then, fungal suspensions in the above groups were inoculated onto the Leeming & Notman medium separately. After 7-day culture, the diameter and number of colonies were measured to evaluate the fungal cell viability, the protease activity was measured by using the whole-milk plate medium, and the ultrastructure of Malassezia furfur in each group was observed by transmission electron microscopy. One-way analysis of variance was used for comparisons among multiple groups, least significant difference- t test for multiple comparisons, and Pearson correlation analysis for analyzing correlations of laser energy with colony diameter, number and protease activity. Results:The colony diameter and number both significantly differed among the control group, 500-, 600-, 700-, 800- and 900-mJ groups (colony diameter: 4.05 ± 0.69, 3.76 ± 0.51, 3.28 ± 0.41, 3.09 ± 0.72, 2.54 ± 0.64 and 2.43 ± 0.41 mm, respectively; colony number: 4 787 ± 597, 4 287 ± 761, 1 879 ± 275, 1 082 ± 248 and 209 ± 42, 72 ± 31 colony-forming units, respectively; F = 14.83, 231.85, respectively, both P < 0.05) , and were significantly decreased in the 600-, 700-, 800- and 900-mJ groups compared with the control group (all P < 0.05) . The laser energy was negatively correlated with the colony diameter and number ( r = -0.67, -0.91, respectively, both P < 0.05) . The protease activity significantly differed among the control group, 500-, 700- and 900-mJ groups ( F = 346.60, P < 0.05) , and was significantly lower in the 700- and 900-mJ groups than in the control group (both P < 0.05) . There was a negative correlation between the laser energy and protease activity ( r = -0.94, P < 0.05) . Transmission electron microscopy showed intact fungal structures in the control group, relatively intact fungal structures in the 500-mJ group, and obviously damaged fungal structures in the 600- to 900-mJ groups, and the greater the laser energy, the more severely the fungal structures were damaged. Conclusion:The 1 064-nm Q-switched Nd:YAG laser could affect the cell viability of and protease activity in Malassezia furfur, and damage its structures.

Recovery of Red Pigments from Monascus purpureus FTC 5357 by Extraction of Fermented Solids: Operational Conditions and Kinetics

Abstract Solvent extraction of red pigments from fermented solids is reported. The pigments were produced by solid-state fermentation of oil palm frond (OPF) biomass with the food-safe fungus Monascus purpureus FTC 5357. The effects of extraction solvent and other operational conditions (pH, temperature, agitation rate, contact time) on the recovery of pigments are discussed. The recovery was maximized using aqueous ethanol (60% ethanol by vol) as solvent at pH 6, 30 °C, with an extraction time of 16 h and an agitation rate of 180 rpm. A fermented solids dry mass of 1 g was used for each 160 mL of solvent during extraction. The kinetics of extraction were assessed by fitting the experimental data to different models. Peleg's model proved to be the best for describing solid-liquid extraction of the pigments under the above specified conditions. The highest extraction yield of red pigments under the above specified optimal conditions was 207(6.08 AU g(1 dry fermented solids.

Influence of Er, Cr: YSGG laser on root dentin submitted to erosive and/or abrasive challenges

Abstract This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn's post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 μm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

Establishment of a cocrystal characterization method for sacubitril valsartan sodium / 药学学报

Sacubitril valsartan sodium (LCZ696) is an ionic cocrystal drug. The purpose of this study was to explore the cocrystal features of LC696 by establishing a variety of characterization methods, and thus provide basic research data for effective quality control. The cocrystal characteristics of LCZ696 and its tablets were identified by applying analytical means including powder X-ray diffraction (PXRD), fourier transform infrared spectroscopy (FTIR), Raman spectra (RM), differential scanning calorimetry (DSC) and solid-state nuclear magnetic resonance spectroscopy (ssNMR). The crystalline water and hygroscopicity of LCZ696 were analyzed by thermogravimetric analysis (TGA), dynamic vapor sorption (DVS), hygroscopicity test and Karl Fischer reaction method. The results show that PXRD, FTIR, DSC and ssNMR can effectively distinguish the features of LCZ696 cocrystal, sacubitril monomer, valsartan monomer, and sacubitril-valsartan (1∶1) mixture. RM can be used as a supplementary approach. Combined with the analysis by TGA, DVS, hygroscopicity test and Karl Fischer reaction method results, LCZ696 contains 2.5 crystalline water molecules and is very hygroscopic; we recommend that LCZ696 be stored in an environment with a relative humidity below 60%. By characterizing the crystal features we can establish quality control measure and evaluate the stability of the drug tablets. This study provides data in support for the establishment of the LCZ696 quality standard.