Correlation between spinous process deviation and lumbar disc herniation in young patients / 中国骨伤

OBJECTIVE@#To explore the relationship between spinous process deviation and lumbar disc herniation in young patients.@*METHODS@#From March 2015 to January 2022, 30 treated young (under the age of 30) patients with lumbar disc herniation were included as the young group. In addition 30 middle-aged patients (quinquagenarian group) with lumbar disc herniation and 30 patients with non-degenerative spinal diseases (young non-degenerative group) were selected as control groups. The angle of the spinous process deviation was measured on CT and statistically analyzed by various groups. All the data were measured twice and the average value was taken and recorded.@*RESULTS@#The average angle of spinous process deviation in the degenerative lumbar vertebra of young patients were (3.89±3.77) degrees, similar to the (3.72±2.98) degrees of quinquagenarian patients(P=0.851). The average angle of s spinous process deviation young non-degenerative group were (2.20±2.28) degrees, significantly less than young group(P=0.040). The spinous process deviation angle of the superior vertebral of the degenerative lumbar in the young group was (4.10±3.44) degrees, which similar to the (3.47±2.87) degrees in the quinquagenarian group (P=0.447). A total of 19 young patients had the opposite deviation direction of the spinous process of the degenerative lumbar vertebra and upper vertebra, while only 7 quinquagenarian patients had this condition(P=0.02). The type of lumbar disc herniation in young patients had no significant relationship with the direction of spinous process deflection of the degenerative or upper lumbar vertebra (P>0.05).@*CONCLUSION@#Spinous process deviation is a risk factor of young lumbar disc herniation patients. If the deviation directions of adjacent lumbar spinous processes are opposite, it will increase the incidence of lumbar disc herniation in young patients. There was no significant correlation between the type of disc herniation and the deviation direction of the spinous process of the degenerative or upper lumbar vertebra. People with such anatomical variation can strengthen the stability of spine and prevent lumbar disc herniation through reasonable exercise.

Correlation analysis of Cobb angle and linear spinous process angle in adolescent idiopathic scoliosis / 中国骨伤

OBJECTIVE@#To analyze the correlation between Cobb angle and spinous process angle (SPA) on X-ray film and body surface in patients with mild to moderate adolescent idiopathic scoliosis(AIS). To explore the possibility of linear SPA to assess scoliosis.@*METHODS@#Retrospective study for correlation of Cobb angle and linear SPA on X-ray film. AIS patients treated and taken full spine anteroposterior X-ray from January 2019 to December 2021 were analyzed correlation of Cobb angle and linear SPA on X-ray film. Prospective study for correlation of Cobb angle and body linear SPA. AIS patients treated and taken full spine anteroposterior X-ray from December 1 to December 9 this year were analyzed correlation of Cobb angle and body linear SPA.@*RESULTS@#A total of 113 AIS patients with age an average of (14.02±2.16) years old(ranged from 10 to 18 years old) were recruited in retrospective study, involving 26 males and 87 females;there were 71 patients with mild AIS and 42 patients with moderate AIS. Cobb angle in AIS patients was significantly inversely associated with SPA(r=-0.564, P<0.001), the linear regression equation was:Cobb angle=169.444-0.878×SPA. Cobb angles in patients with mild scoliosis were significantly and inversely associated with SPA(r=-0.269, P=0.012), the linear regression equation was:Cobb angle=46.832-0.185×SPA. Cobb angles in patients with moderate scoliosis were also clearly correlated with SPA(r=-0.417, P=0.003), the linear regression equation was:Cobb angle=113.889-0.516×SPA. Thirty-eight patients were recruited in prospective study. The mean Cobb angle and body linear SPA were(18.70±6.98)°, ranged from 11.3° to 36.0° and (170.34±4.57)°, ranged from 162.1° to 177.7° respectively. There was significantly negative correlation(r=-0.651, P<0.001), the linear regression equation is:Cobb angle=187.91-0.99×SPA.@*CONCLUSION@#Linear SPA on X-ray film or on the body was significantly negatively correlated with Cobb angles, but the regression equation fits poorly, so it's not suitable for diagnosis of scoliosis;however, linear SPA is appropriate for self-controlled assessment of scoliotic therapy or for dynamic assessment of spinal flexibility.

A morphometric study of spinoglenoid notch, subcoracoacromial arch, and spinous process of the scapula on shoulder impingement

Introduction: Morphometric study of spinoglenoid notch, coracoacromial arch, and another measurement of the scapulae are required to understand the reason for spasms of common muscle due to supraspinatus tendinitis, nerve compression over the spinoglenoid notch. Therefore, the aim of this study was to discuss the subcoracoacromial arch, deviation of the spinous process, and measurement of the spinoglenoid notch. Materials and Methods: This study was conducted at the Department of Anatomy, Sri Venkateshwaraa Medical College Hospital & Research Centre, Chennai, Tamil Nadu, India on 70 scapulae that include 58 non-articulated scapulae and 12 articulated scapulae. All the measurements were performed with a vernier caliper and the alignment of the spinous process of the scapula was measured with a goniometer. All the measurements are compared on both sides. Results: All the measurements were performed and presented as mean with standard deviation. We found the variation of diameter between the left and right sides. Spinoglenoid notch diameters were noted as anterior to posterior right 2.97 ± 0.37 cm, left 3.06 ± 0.56 cm and medial to lateral right 1.36 ± 0.14 cm, left 1.4 ± 0.08 cm. Subcoracoacromial arch was observed as right 1.85 ± 0.23 cm and left 1.92 ± 0.4 cm. The direction of the spinous process of the scapula was noted as right 21.50º ± 8.50 and left 18.8º ± 7.89. Conclusion: The present morphometric study findings may give a different approach to supraspinatous tendinits, shoulder instability, and dislocation cases due to morphometric changes present in the spinous process, acromion process, glenoid cavity, and spinoglenoid notch of the scapula. These morphometric studies on scapula can help radiologists, orthopedicians, and physiotherapists to plan patient management.

Fractura de "clay shoveler" como consecuencia de un accidente de trabajo en un peón agrícola: reporte de un caso / Clay shoveler's fracture as a result of a work injury in a manual laborer: case report

Resumen La fractura de "clay shoveler" es una fractura poco frecuente de la apófisis espinosa de las vértebras cervicales o torácicas superiores, más comúnmente entre C6 y T6 producida de manera aguda o crónica por fuerzas rotacionales ejercidas a nivel cervical en la labor de "palear", aunque también se han reportado casos asociados a la práctica de algunos deportes. Se presenta el caso de un péon agrícola de 43 años de edad que consulta por cervicalgia y sensación de inmovilidad luego de un movimiento brusco durante un levantamiento de tierra con pala, siendo que el ente asegurador no establece relación de causalidad, por lo que demanda a nivel judicial para valoración médico legal, documentándose fractura de "clay shoveler" en C7 y T1 según estudios radiológicos. La valoración médico legal del caso, que se sustentó en la documentación médica y estudios radiológicos, permitió determinar que la lesión evidenciada era consecuencia del accidente laboral reportado, estableciéndose la relación causal.

Abstract Clay shoveler's fracture is an infrequent lesion of the spinous process of the cervical or upper thoracic vertebrae, mainly between C6 and T6, produced acutely or chronically because of rotational forces exerted at the cervical level during shoveling, but some cases have been reported as a result of the practice of sports. We present the case of a 43-year old manual laborer who consulted because of cervical pain and range of motion limitation after a sudden move performed during shoveling, diagnosed with a clay shoveler's fracture in C7 and T1, treated conservatively. The patient was discharged after finishing treatment, since the insurance company dismissed causality. The medico legal assessment of the case, based on medical documentation, radiological findings and an Orthopedics consult, helped stablish causality since it was determined that the fracture was a result of the accident reported.

Restoration of the Spinous Process Following Muscle-Preserving Posterior Lumbar Decompression via Sagittal Splitting of the Spinous Process

BACKGROUND: In lumbar spinal stenosis, spinous process-splitting decompression has demonstrated good clinical outcomes with preservation of the posterior ligamentous complex and paraspinal muscles in comparison to conventional laminectomy, but the radiological consequence and clinical impact of the split spinous processes have not been fully understood. METHODS: Seventy-three patients who underwent spinous process-splitting decompression were included. The bone union rate and pattern were evaluated by computed tomography performed 6–18 months after surgery and compared among subgroups divided according to the number of levels decompressed and the extent of spinous process splitting. The bone union pattern was classified into three categories: complete union, partial union, and nonunion. The visual analog scale (VAS) score, Oswestry disability index (ODI), and walking distance assessed both before and 24–36 months after surgery were compared among subgroups divided according to the union pattern of the split spinous process. RESULTS: Overall, the rates of complete union, partial union, and nonunion were 51.7%, 43.2%, and 5.1%, respectively. In the subgroup with partial splitting of the spinous process, the rates were 85.7%, 14.3%, and 0%, respectively; those of the subgroup with total splitting of the spinous process were 32.9%, 59.2%, and 7.9%, respectively. With single-level decompression, a higher rate of union was observed compared with multilevel decompression. The VAS, ODI, and walking distance were significantly improved after surgery and did not differ according to the degree of union of the split spinous process. CONCLUSIONS: We found that the single-level operation and partial splitting of the spinous process were favourable factors for obtaining complete restoration of the posterior bony structure of the lumbar spine in spinous process-splitting decompression.

Clay-Shoveler's Fracture in an 18-Year-Old Cheerleader: A Case Report

Clay-Shoveler's fracture refers to a fracture that is solely developed on the spinous process of the cervical spine or the thoracic vertebrae. This fracture rarely occurs during sporting activities. In this case, an 18-year-old female developed the fracture on the spinous process of the 7th cervical spine and 1st thoracic vertebrae due to the repetitive practice of cheerleading. The patient's pain was improved by wearing a support device and taking an anti-inflammatory analgesic drug and muscle relaxant. Her case is being followed-up at the outpatient department.

Risk Factors for Cement Loosening after Vertebroplasty for Osteoporotic Vertebral Fracture with Intravertebral Cleft: A Retrospective Analysis

STUDY DESIGN: Retrospective case-control study. PURPOSE: To evaluate the primary outcomes and radiographic results of percutaneous vertebroplasty (PVP) in patients with singlelevel osteoporotic vertebral fracture (OVF) with intravertebral cleft (IVC) to identify the risk factors for cement loosening after PVP. OVERVIEW OF LITERATURE: PVP is a widely accepted method for managing painful OVF; however, cement loosening occasionally occurs with poor outcomes. METHODS: This retrospective study involved 195 patients treated with PVP for single-level OVF with IVC. Six months thereafter, the primary outcomes were evaluated using the Visual Analog Scale (VAS) for back pain and the modified Oswestry Disability Index. Computed tomography was conducted to detect cement loosening. Possible risk factors, such as age, sex, wedging angle, intravertebral instability, Parkinson’s disease, spinous process fracture, ankylosing spinal hyperostosis, split vertebrae, and adjacent intervertebral vacuum, were assessed. RESULTS: Forty-nine patients (25%) experienced cement loosening 6 months after PVP. The mean VAS scores were significantly higher in patients with cement loosening than in those without (50 vs. 26 mm, respectively; p < 0.01). Cement loosening was closely associated with intravertebral instability (odds ratio [OR], 1.20; 95% confidence interval [CI], 1.04–1.40; p =0.015), Parkinson’s disease (OR, 54.31; 95% CI, 4.47–659.53; p =0.002), spinous process fracture (OR, 7.11; 95% CI, 1.65–30.60; p =0.009), and split vertebrae (OR, 11.59; 95% CI, 1.64–82.02; p =0.014). CONCLUSIONS: Patients with cement loosening experienced worse back pain than those without cement loosening. The important risk factors that influenced cement loosening after PVP were high intravertebral instability, Parkinson’s disease, spinous process fracture, and split vertebrae.

The effects of cervical spinous process fracture with posterior ligamentous complex injury on stability of the goat cervical spine / 医用生物力学

Objective To investigate the effect of cervical spinous process fracture with posterior ligamentous complex (PLC) injury on biomechanical stability of the goat cervical spine specimen in vitro, and evaluate the role of posterior structure in maintaining the stability of cervical spine. Methods Twenty-four fresh goat cervical spine C3-6 specimens were randomly and evenly divided into 3 groups: control group (group A), simple cervical spinous process fracture group (group B) and cervical spinous process fracture with PLC injury group (group C). Under loading of 1.5 N·m torque, the range of motion (ROM) in each group was respectively measured under 6 working conditions: flexion, extension, lateral bending and axial rotation, and the ROM differences among 3 groups were compared by using one-way ANOVA analysis. Results Simple cervical spinous process fracture had little effect on the stability of cervical spine and there was no significant difference in ROM between group B and control group (P>0.05) under all working conditions. Compared with control group, the ROM in flexion, extension and axial rotation significantly increased in group C (P0.05). Conclusions Simple cervical spinous process fracture does not affect the overall stability of cervical spine. Cervical spinous process fracture with PLC injury is more likely to cause cervical instability than simple cervical spinous process fracture, and surgical intervention is required in cervical spinous process fracture with PLC injury.

The effects of cervical spinous process fracture with posterior ligamentous complex injury on stability of the goat cervical spine / 医用生物力学

Objective To investigate the effect of cervical spinous process fracture with posterior ligamentous complex (PLC) injury on biomechanical stability of the goat cervical spine specimen in vitro,and evaluate the role of posterior structure in maintaining the stability of cervical spine.Methods Twenty-four fresh goat cervical spine C3-6 specimens were randomly and evenly divided into 3 groups:control group (group A),simple cervical spinous process fracture group (group B) and cervical spinous process fracture with PLC injury group (group C).Under loading of 1.5 N · m torque,the range of motion (ROM) in each group was respectively measured under 6 working conditions:flexion,extension,lateral bending and axial rotation,and the ROM differences among 3 groups were compared by using one-way ANOVA analysis.Results Simple cervical spinous process fracture had little effect on the stability of cervical spine and there was no significant difference in ROM between group B and control group (P ＞ 0.05) under all working conditions.Compared with control group,the ROM in flexion,extension and axial rotation significantly increased in group C (P ＜ 0.05),and no significant ROM difference was found in lateral bending between control group and group C (P ＞ 0.05).Conclusions Simple cervical spinous process fracture does not affect the overall stability of cervical spine.Cervical spinous process fracture with PLC injury is more likely to cause cervical instability than simple cervical spinous process fracture,and surgical intervention is required in cervical spinous process fracture with PLC injury.

Improved bone knife spinous lamina osteotomy replantation complex treatment of lumbar spinal stenosis / 临床外科杂志

Objective To improve bone knife spinous lamina osteotomy replantation complex treatment of lumbar spinal stenosis patients.Methods Retrospective analysis from January 2014 to January 2015,the clinical data of 56 patients with lumbar spinal stenosis disease,all patients were taken modified osteotome bone cutting composite lamina spinous process and implant treatment,through follow-up,the CT,preoperatie and follow-up sessions at the end of the measurement of vertebral canal sagittal diameter,spinal canal diameter,to observe the prognosis and complications,and according to the Japanese orthopaedic society of low back pain score standard(Japanese orthopaedics asso ciation,JOA),the rate of good evaluation of clinical curative effect.Results This group of 56 patients with lumbar spinal stenosis disease,the last follow-up,vertebral canal sagittal diameter,spinal canal diameter,than preoperative significantly increased;JOA score was obviously improve the preoperative;The t test,statistically significant difference(P<0.05);The rate of good clinical curative effect was 96.43%;Follow-up period,all patients by CT review that lamina in situ fusion rate was 100%,no lumbar spinal instability,secondary lumbar spinal stenosis,composite lamina spinous complications such as shift,subsidence,fall off;6 months basic achieve bony healing.Conclusion The modified bone knife spinous lamina osteotomy replantation complex therapeutic effect of lumbar spinal stenosis precise,effective reconstruction of posterior structure stability,integrity,reduce complications,the prognosis is good,worthy of clinical use.

Biomechanical Analysis of a Pedicle Screw-Rod System with a Novel Cross-Link Configuration

STUDY DESIGN: The strength effects of a pedicle screw-rod system supplemented with a novel cross-link configuration were biomechanically evaluated in porcine spines. PURPOSE: To assess the biomechanical differences between a conventional cross-link pedicle screw-rod system versus a novel cross-link instrumentation, and to determine the effect of the cross-links. OVERVIEW OF LITERATURE: Transverse cross-link systems affect torsional rigidity, but are thought to have little impact on the sagittal motion of spinal constructs. We tested the strength effects in pullout and flexion-compression tests of novel cross-link pedicle screw constructs using porcine thoracic and lumbar vertebrae. METHODS: Five matched thoracic and lumbar vertebral segments from 15 porcine spines were instrumented with 5.0-mm pedicle screws, which were then connected with 6.0-mm rods after partial corpectomy in the middle vertebral body. The forces required for construct failure in pullout and flexion-compression tests were examined in a randomized manner for three different cross-link configurations: un-cross-link control, conventional cross-link, and cross-link passing through the base of the spinous process. Statistical comparisons of strength data were analyzed using Student's t-tests. RESULTS: The spinous process group required a significantly greater pullout force for construct failure than the control group (p=0.036). No difference was found between the control and cross-link groups, or the cross-link and spinous process groups in pullout testing. In flexion-compression testing, the spinous processes group required significantly greater forces for construct failure than the control and cross-link groups (p<0.001 and p=0.003, respectively). However, there was no difference between the control and cross-link groups. CONCLUSIONS: A novel cross-link configuration that features cross-link devices passing through the base of the spinous processes increased the mechanical resistance in pullout and flexion-compression testing compared to un-cross-link constructs. This configuration provided more resistance to middle-column damage under flexion-compression testing than conventional cross-link configuration.

Uso de un nuevo implante: U-Force N6 a nivel L5 S1 para evitar la inestabilidad lumbar tras discectomía simple / Using a new implant: U-Force N6 to level L5 S1 to avoid lumbar instability after single discectomy

Resumen: Introducción: Estudio prospectivo en pacientes afectos de hernia discal lumbar L5 S1 tratados mediante la U-Force interespinosa N6. El espaciador interespinoso denominado "U" está realizado en titanio y es colocado entre las apófisis interespinosas. Material y métodos: 50 pacientes operados de hernia discal lumbar fueron evaluados; 25 pertenecían al grupo U-N6 y 25 sólo fueron tratados con microcirugía. Se les realizó valoración clínica y estudios radiológicos seriados. Todos los individuos tuvieron un seguimiento durante dos años (2013-2014). Resultados: Nuestro estudio revela que el uso del dispositivo fue más efectivo (estadísticamente significativo) para el retraso de la inestabilidad que sólo la técnica quirúrgica (p < 0.01). Permitió su colocación en 90% de los sujetos. Conclusión: El uso de este dispositivo retrasa el colapso vertebral y, por ende, la inestabilidad del segmento operado. Noventa por ciento de los casos del grupo N6 presentan el dispositivo a nivel de L5 S1 versus 60% del grupo histórico con otros dispositivos (2004-2011).

Abstract: Introduction: We conducted a retrospective study in patients with disc herniation and compared the results obtained in individuals treated with the U device N6 with those acquired in patients treated without any device. The U device is a titanium alloy implant that is placed between the spinous processes. Material and methods: In a cohort of 50 patients with degenerative lumbar disc, 25 underwent surgical treatment in which the U device was placed and 25 control individuals were treated with discectomy alone. Patients underwent serial follow-up evaluations, and radiographic assessment was used to determine the outcome. Up to two years of follow-up data were obtained in all patients (2013-2014). Results: Statistically significant improvement was seen in patients treated with the coflex device in the management of lumbar disc degeneration to avoid lumbar instability in the future (p < 0.01). It allowed its placement in 90% of the patients. Conclusions: Our study shows that the coflex device was more effective than the discectomy group in the management of lumbar instability. Ninety percent of the cases of the N6 group present the device at L5 S1 versus 60% of the historical group with other devices (2004-2011).

A morphometric study of the lumbar spinous process in the Chinese population

Our goal was to analyze the anatomical parameters of the lumbar spine spinous process for an interspinous stabilization device designed for the Chinese population and to offer an anatomical basis for its clinical application. The posterior lumbar spines (T12-S1) of 52 adult cadavers were used for measuring the following: distance between two adjacent spinous processes (DB), distance across two adjacent spinous processes (DA), thickness of the central spinous processes (TC), thickness of the superior margin of the spinous processes (TS), thickness of the inferior margin of the spinous processes (TI), and height of the spinous processes (H). Variance and correlation analyses were conducted for these data, and the data met the normal distribution and homogeneity of variance. DB decreased gradually from L1-2 to L5-S1. DA increased from T12-L1 to L2-3 and then decreased from L2-3 to L4-5. The largest H in males was noted at L3 (25.45±5.96 mm), whereas for females the largest H was noted at L4 (18.71±4.50 mm). Usually, TS of the adjacent spinous process was lower than TI. Based on the anatomical parameters of the lumbar spinous processes obtained in this study, an “H”-shaped coronal plane (posterior view) was proposed as an interspinous stabilization device for the Chinese population. This study reports morphometric data of the lumbar spinous processes in the Chinese population, which provides an anatomical basis for future clinical applications.

Sixth cervical vertebra with bilateral double foramen transversarium and non-bifid spine: a rare case.

Anatomical knowledge of variations is of utmost clinical importance to all of us as they may be one of the reasons as etiological as well as of surgical importance. Vertebral region also presents many variations. Foramen transversarium are typical feature of cervical vertebrae and give way to neurovascular bundle, like vertebral artery, vertebral veins and sympathetic plexus around them throughout. Foramen transversarium and spine or spinous process of cervical vertebrae are important to all of medical specialists as well as for surgeons specially the surgeons dealing with head & neck surgeries. Knowledge of anatomical/surgical variations is very important for neurosurgeons and radiologists for reporting and planning for surgeries as this type of variation if ignored may be a cause for fatal or undesirable outcome of the surgical procedure or may lead to a different planning/approach at the time or during the surgical procedure. In the present case we observed very uncommon finding of bilateral double foramen transversarium as well as a nonbifid spinous process in sixth cervical vertebra which is extremely rare. Right and left both main foramen transversarium were bilateral symmetrical and rounded in shape. Right accessory foramen transversarium was complete while left was incomplete. Finding of present study is important in neurosurgery for posterior approaches of the cervical vertebrae and also useful for radiological studies to avoid erroneous counting of cervical spines in clinical observations as surface landmark.

Finite Element Analysis for Comparison of Spinous Process Osteotomies Technique with Conventional Laminectomy as Lumbar Decompression Procedure

PURPOSE: The purpose of this study was to evaluate and compare the biomechanical behavior of the lumbar spine after posterior decompression with the spinous process osteotomy (SPiO) technique or the conventional laminectomy (CL) technique using a finite element (FE) model. MATERIALS AND METHODS: Three validated lumbar FE models (L2-5) which represented intact spine and two decompression models using SPiO and CL techniques at the L3-4 segment were developed. In each model, the ranges of motion, the maximal von Mises stress of the annulus fibrosus, and the intradiscal pressures at the index segment (L3-4) and adjacent segments (L2-3 and L4-5) under 7.5 Nm moments were analyzed. Facet contact forces were also compared among three models under the extension and torsion moments. RESULTS: Compared to the intact model, the CL and SPiO models had increased range of motion and annulus stress at both the index segment (L3-4) and the adjacent segments under flexion and torsion. However, the SPiO model demonstrated a reduced range of motion and annulus stress than the CL model. Both CL and SPiO models had an increase of facet contact force at the L3-4 segment under the torsion moment compared to that of the intact model. Under the extension moment, however, three models demonstrated a similar facet contact force even at the L3-4 model. CONCLUSION: Both decompression methods lead to postoperative segmental instability compared to the intact model. However, SPiO technique leads to better segmental stability compared to the CL technique.

Prognostic Factors of Surgical Outcome after Spinous Process-Splitting Laminectomy for Lumbar Spinal Stenosis

STUDY DESIGN: A retrospective case review. PURPOSE: To assess the clinical and radiographic outcomes and identify the predictive factors associated with poor clinical outcomes after lumbar spinous process-splitting laminectomy (LSPSL) for lumbar spinal stenosis (LSS). OVERVIEW OF LITERATURE: LSPSL is an effective surgical treatment for LSS. Special care should be taken in patients with degenerative lumbar scoliosis (DLS). METHODS: A consecutive retrospective case review of patients undergoing LSPSL for LSS with a minimum 2-year follow-up was performed. Mild DLS and mild degenerative spondylolisthesis (DS) were included in the study. The Japanese Orthopedic Association (JOA) score and recovery rate were reviewed. Poor clinical outcome was defined as a recovery rate or =5 mm was found in 8 of 24 patients (33%) in the DS group. A progression of curvature > or =5degrees was found in 5 of 14 patients (36%) in the DLS group. The progression of scoliosis and slippage did not influence the clinical outcome. CONCLUSIONS: The clinical and radiographic outcomes of LSPSL for LSS were favorable. Pre-existing DLS was significantly associated with poor clinical outcome.

Spinous Process-Splitting Hemilaminoplasty for Intradural and Extradural Lesions

OBJECTIVE: To describe a novel spinous process-splitting hemilaminoplasty technique for the surgical treatment of intradural and posterior epidural lesions that promotes physiological restoration. METHODS: The spinous process was split, the area of the facet lamina junction was drilled, and en bloc hemilaminectomy was then performed. After removing intradural and posterior epidural lesions, we fitted the previously en bloc-removed bone to the pre-surgery same shape, and held it in place with non-absorbable sutures. Surgery was performed on 16 laminas from a total of nine patients between 2011 and 2014. Bony union of the reconstructed lamina was assessed using computed tomography (CT) at 6 months after surgery. RESULTS: Spinous process-slitting hemilaminoplasty was performed for intradural extramedullary tumors in eight patients and for ossification of the ligament flavum in one patient. Because we were able to visualize the margin of the ipsilateral and contralateral dura, we were able to secure space for removal of the lesion and closure of the dura. None of the cases showed spinal deformity or other complications. Bone fusion and maintenance of the spinal canal were found to be perfect on CT scans. CONCLUSION: The spinous process-splitting hemilaminoplasty technique presented here was successful in creating sufficient space to remove intradural and posterior epidural lesions and to close the dura. Furthermore, we were able to maintain the physiological barrier and integrity after surgery because the posterior musculature and bone structures were restored.

Comparison of Spinous Process-Splitting Laminectomy versus Conventional Laminectomy for Lumbar Spinal Stenosis

STUDY DESIGN: Seventy-five patients who had been treated for lumbar spinal stenosis (LSS) were reviewed retrospectively. PURPOSE: Invasion into the paravertebral muscle can cause major problems after laminectomy for LSS. To address these problems, we performed spinous process-splitting laminectomy. We present a comparative study of decompression of LSS using 2 approaches. OVERVIEW OF LITERATURE: There are no other study has investigated the lumbar spinal instability after spinous process-splitting laminectomy. METHODS: This study included 75 patients who underwent laminectomy for the treatment of LSS and who were observed through follow-ups for more than 2 years. Fifty-five patients underwent spinous process-splitting laminectomy (splitting group) and 20 patients underwent conventional laminectomy (conventional group). We evaluated the clinical and radiographic results of each surgical procedure. RESULTS: Japanese Orthopaedic Association score improved significantly in both groups two years postoperatively. The following values were all significantly lower, as shown with p-values, in the splitting group compared to the conventional group: average operating time (p=0.002), postoperative C-reactive protein level (p=0.006), the mean postoperative number of days until returning to normal body temperature (p=0.047), and the mean change in angulation 2 years postoperatively (p=0.007). The adjacent segment degeneration occurred in 6 patients (10.9%) in the splitting group and 11 patients (55.0%) in the conventional group. CONCLUSIONS: In this study, the spinous process-splitting laminectomy was shown to be less invasive and more stable for patients with LSS, compared to the conventional laminectomy.

Twelve Contiguous Spinous Process Fracture of Cervico-Thoracic Spine

The clay-shoveler's fracture is an isolated avulsion fracture of the lower cervical or upper thoracic spinous process. Among them, multiple spinous process fractures are very rare. We present 34-year-old male patient who have multiple spinous process fractures with twelve contiguous levels of cervico-thoracic spine (from C4 to T8) after motorcycle accident. This case is multiple isolated spinous process fractures with good clinical outcome.

Eleven Levels of Spinous Process Fractures in Thoracolumbar Spine

Cases of over 5-level spinous process fractures are extremely rare. Thoracolumbar region of spine is superimposed on ribs; and as such additional studies such as computerized tomography are needed to diagnose fractures in this region. We report a case of 11 contiguous level thoracolumbar spinous process fractures, which has been treated conservatively.