ABSTRACT
OBJECTIVE@#To evaluate the clinical outcomes of allogeneic femoral head as strut allograft combined with proximal humeral internal locking system (PHILOS) in the treatment of proximal humeral Neer grade Ⅳ fracture with humeral head collapse.@*METHODS@#From January 2018 to November 2020, 18 patients with Neer grade Ⅳ fracture with humeral head collapse were treated with strut allograft with PHILOS, including 4 males and 14 females, aged from 55 to 78 years old, with an average of (68.11±7.20) years old. The operation time, intraoperative bleeding, postoperative drainage volume, fracture healing time, neck-shaft angle and the height of the humeral head, failure of internal fixation the shoulder function at the last follow-up was assessed using Neer's scoring system.@*RESULTS@#All 18 patients were followed up, and the duration ranged from 10 to 12 months, with an average of (11.08±0.65) months. The operation time was (66.44±5.06) min, the intraoperative bleeding volume was (206.67±36.14) ml, the postoperative drainage volume was (76.11±9.63) ml, and the fracture healing time was (17.28±3.92) weeks. At the last follow-up, the degree of loss of neck-shaft angle was (5.44±0.86) ° and the loss of the height of humeral head was (1.43±0.27) mm. All 18 patients had healing without complications such as fracture, withdrawal, penetration of internal fixation and necrosis of humeral head. According to Neer's evaluation standard, the total score was (89.61±5.60), 10 cases got an excellent result, 6 good, 2 fair.@*CONCLUSION@#Allogeneic femoral head combined with PHILOS is an appropriate treatment for the four-part proximal humerus fractures with humeral head collapse, exhibiting good clinic outcome.
Subject(s)
Male , Female , Humans , Middle Aged , Aged , Humeral Head , Shoulder , Treatment Outcome , Bone Plates , Retrospective Studies , Humerus , Shoulder Fractures/surgery , Fracture Fixation, Internal/adverse effects , Humeral Fractures , AllograftsABSTRACT
Proximal humerus fractures are common problems plaguing in geriatric population. Approximately half of all proximal humeral fractures occur due to fall usually at ground level. (Low velocity trauma). In younger individuals fractures occurring because of higher-energy trauma such as a fall from a height, motor vehicle accidents, sports, or assaults. The proximal humerus fracture because of three loading modes: compressive loading of the glenoid onto the humeral head, bending forces at the surgical neck, and tension forces of the rotator cuff at the greater and lesser tuberosities. Most proximal humeral fractures are treated nonoperatively. However, surgical treatment is becoming more popular, with development of modern implant (PHILOS plate). Implant failure is common complication occur due to improper fixation, osteoporotic bone, early mobilization, non-union and varus malalignment. Various modality available for its management i.e., Hemiarthroplasty, reverse shoulder arthroplasty and ORIF + bone graft. IN this case report 60-year male patient with right side proximal humerus fracture treated with PHILOS plating. At 6 week follow up radiograph suggest implant failure. Patient was posted for revision surgery ORIF + platting and fibular strut graft was done.
ABSTRACT
Management of non-union with bone gap in tibia is difficult, especially if superimposed by infection of bone. Various modalities have been described for the treatment of gap non-union, with their own advantages and disadvantages. A case of a paediatric patient with traumatic left tibia fracture which was complicated by subsequent osteomyelitis and non-union presented to tertiary care hospital. After failure of different modalities of treatment, to provide union, the patient was managed with tibialization of fibula with fibula strut graft supported by a rush nail
ABSTRACT
BACKGROUND@# Stent failure is more likely in the lipid rich and thrombus laden culprit lesions underlying ST-segment elevation myocardial infarction (STEMI). This study assessed the effectiveness of post-dilatation in primary percutaneous coronary intervention (pPCI) for acute STEMI.@*METHODS@# The multi-center POST-STEMI trial enrolled 41 consecutive STEMI patients with symptom onset <12 hours undergoing manual thrombus aspiration and Promus Element stent implantation. Patients were randomly assigned to control group (n=20) or post-dilatation group (n=21) in which a non-compliant balloon was inflated to >16 atm pressure. Strut apposition and coverage were evaluated by optical coherence tomography (OCT) after intracoronary verapamil administration via thrombus aspiration catheter, post pPCI and at 7-month follow-up. The primary endpoint was rate of incomplete strut apposition (ISA) at 7 months after pPCI.@*RESULTS@# There were similar baseline characteristics except for stent length (21.9 [SD 6.5] mm vs. 26.0 [SD 5.8] mm, respectively, P=0.03). In post-dilatation vs. control group, ISA rate was lower (2.5% vs. 4.5%, P=0.04) immediately after pPCI without affecting final TIMI flow 3 rate (95.2% vs. 95.0%, P>0.05) or corrected TIMI frame counts (22.6±9.4 vs. 22.0±9.7, P>0.05); and at 7-month follow-up (0.7% vs. 1.8%, P<0.0001), the primary study endpoint, with similar strut coverage (98.5% vs. 98.4%, P=0.63) and 1-year rate of major adverse cardiovascular events (MACE).@*CONCLUSION@# In STEMI patients, post-dilatation after stent implantation and thrombus aspiration improved strut apposition up to 7 months without affecting coronary blood flow or 1-year MACE rate. Larger and longer term studies are warranted to further assess safety (ClinicalTrials.gov identifi er: NCT02121223).
ABSTRACT
@#Introduction: Giant cell tumour (GCT) of the bone is a benign tumour with a high tendency to recur after surgery. This study aimed to analyse prospectively the rate of local recurrence following management of giant cell tumours by curettage, using intravenous zoledronic acid as an adjuvant, and fibular struts to support the empty cavity after curettage. Materials and Methods: This study was carried out in ten cases of biopsy-proven GCTs: five males and five females, in the age group between 18 and 39 years. All patients were given three doses of zoledronic acid, one pre-operative and two post-operative. Extended curettage was done three weeks after the pre-operative dose of zoledronate. The cavity was left empty in all the cases. Fibular struts were used to support the cavity from collapse. Patients were followed-up for post-operative local recurrence. The functional status of the patients was assessed during each visit using the Musculoskeletal Tumour Society (MSTS) score. Results: There were no recurrences at a follow-up of two years. All patients had a stable knee and were able to bear weight fully. The average knee flexion was 75º. The average MSTS score of the study was 92%. Conclusion: Extended curettage using hydrogen peroxide, systemic zoledronic acid adjuvant and leaving the cavity empty without using cancellous bone graft did not lead to a recurrence of GCT. Non-vascularised fibular strut provided adequate support while the cavity left empty after curettage did not collapse and there was good knee function.
ABSTRACT
A patient presented to our institution for an elective removal of an inferior vena cava (IVC) filter under local anesthesia. Once removed, it was noticed that the filter had a missing secondary leg. The patient had a chest CT done which showed a hyper-attenuating structure in the region of the tricuspid valve highly suspicious for the fractured strut of the filter. Upon these findings, the patient was taken once again to the surgical suite for an endovascular retrieval of the strut. For fear of a possible cardiac injury and a potential need for a sternotomy, the patient received general anesthesia and was placed with appropriate IV access and full cardiac monitors. The strut was removed successfully without any complications. Despite the relative benign nature of this endovascular procedure, one should always be prepared for an appropriate resuscitation in case of an occurrence of a surgical complication.
ABSTRACT
The Anterior clinoid process is closely related to many important anatomical structures including vessels, nerves, and paranasal sinuses. In the majority of cases, this process is osseous, but its pneumatization has been recorded as an anatomic variant. Coronal CT scans of the head region that were done for thirty-seven patients at Tanta University hospitals were collected to be used in teaching radiological anatomy for medical students. During their routine investigation, a case of a female aged 21 years showed bilateral pneumatization of the anterior clinoid processes associated with some variants of the adjacent anatomical structures. These findings were discussed on anatomical basis with referral to their possible clinical implications. If a surgical removal of the anterior clinoid process is recommended, a comprehensive knowledge of its anatomy, pneumatization, and associated regional anatomic variants is crucial for neurosurgeons to avoid risky complications.
ABSTRACT
PURPOSE: We evaluated the medium- to long-term outcomes of cortical strut allografts used to treat periprosthetic bone defects to better understand the correlation between radiological and clinical outcomes. MATERIALS AND METHODS: We retrospectively reviewed outcomes from 19 patients undergoing cortical strut allografts to treat periproshtetic bone defects from 2001 to 2015. The mean age at index operation was 59.4 years and the average follow-up period was 8.6 years. Surgeries were performed because of aseptic loosening (n=9), periprosthetic fractures (n=5), and infections (n=5). Each case was characterized and described in detail including the length of allograft and the union period; possible correlations between allograft length and detailed classification and union period was analyzed. Clinical evaluations included the Harris hip score and Kaplan-Meier survivorship. RESULTS: In revision total hip arthroplasty (THA), the average length of allografts used in patients experiencing fractures was significantly longer than those with aseptic loosening or infection. Of the 19 cases, incorporation was observed in 18 cases (94.7%). The average time to incorporation was 21.2 months and the time to incorporation was not significantly different among the two groups (fracture vs. aseptic loosening or infection). No positive correlation was identified between the length of allograft and incorporation period or in the time to cortical strut allograft incorporation among Paprosky or Vancouver subgroups. CONCLUSION: Results of cortical strut allografts show excellent incorporation rates based on medium- to long-term follow-up. Cortical strut allografts may be considered useful for the treatment of femoral bone defects experienced during revision THA and following periprosthetic fracture.
Subject(s)
Humans , Allografts , Arthroplasty, Replacement, Hip , Classification , Follow-Up Studies , Hip , Periprosthetic Fractures , Retrospective Studies , Survival RateABSTRACT
Objective To analyze the influence from strut numbers on biomechanical properties of Z-shaped stent-grafts, especially on their radial support performance and flexibility, so as to provide theoretical support for the design and clinical selection of Z-shaped stent-grafts. Methods Z-shaped stent-grafts with 5, 8, 10, 12 struts were established by finite element method to simulate the process of compression and bending behavior. Radial displacements were applied on surface of the stent-graft and opposite rotations were applied around the z-axis, until a bending angle of 40°was reached. Then parameters such as stent stress, radial support force, strains in graft, cross-section deflection, bending torque were extracted to evaluate the performance of different stent-grafts. Results Compared with stent-grafts with more strut numbers, 5-strut stent-graft showed a better radial support performance with the maximum radial force during compression, and it also generated the smallest 68 N•mm torque and 67.5% cross-section deflection. The tensile strain in graft of 5-strut stent-graft during the process of bending was relatively smaller. Conclusions The struts number of Z-shaped stent-grafts has a significant influence on biomechanical properties of the stent-grafts. Especially the Z-shaped stent-graft with relatively fewer strut numbers shows an advantage in evaluating radial support performance and flexibility such as the bending torque and the cross-section deflection, and is more suitable to be anchored and fit to the tortuous blood vessel, which will play a positive role in decreasing the complication such as endoleaks and thrombosis. The research findings can guide structure design of Z-shaped stent-grafts and the operation to make an optimal selection.
ABSTRACT
Objective To analyze the influence from strut numbers on biomechanical properties of Z-shaped stentgrafts,especially on their radial support performance and flexibility,so as to provide theoretical support for the design and clinical selection of Z-shaped stent-grafts.Methods Z-shaped stent-grafts with 5,8,10,12 struts were established by finite element method to simulate the process of compression and bending behavior.Radial displacements were applied on surface of the stent-graft and opposite rotations were applied around the z-axis,until a bending angle of 40° was reached.Then parameters such as stent stress,radial support force,strains in graft,cross-section deflection,bending torque were extracted to evaluate the performance of different stentgrafts.Results Compared with stent-grafts with more strut numbers,5-strut stent-graft showed a better radial support performance with the maximum radial force during compression,and it also generated the smallest 68 N · mm torque and 67.5％ cross-section deflection.The tensile strain in graft of 5-strut stent-graft during the process of bending was relatively smaller.Conclusions The strut number of Z-shaped stent-grafts has a significant influence on biomechanical properties of the stent-grafts.Especially the Z-shaped stent-graft with relatively fewer strut numbers shows an advantage in evaluating radial support performance and flexibility such as the bending torque and the cross-section deflection,and is more suitable to be anchored and fit to the tortuous blood vessel,which will play a positive role in decreasing the complication such as endoleaks and thrombosis.The research findings can guide structure design of Z-shaped stent-grafts and optimal selection for surgery.
ABSTRACT
Objective To analyze the influence from strut numbers on biomechanical properties of Z-shaped stentgrafts,especially on their radial support performance and flexibility,so as to provide theoretical support for the design and clinical selection of Z-shaped stent-grafts.Methods Z-shaped stent-grafts with 5,8,10,12 struts were established by finite element method to simulate the process of compression and bending behavior.Radial displacements were applied on surface of the stent-graft and opposite rotations were applied around the z-axis,until a bending angle of 40° was reached.Then parameters such as stent stress,radial support force,strains in graft,cross-section deflection,bending torque were extracted to evaluate the performance of different stentgrafts.Results Compared with stent-grafts with more strut numbers,5-strut stent-graft showed a better radial support performance with the maximum radial force during compression,and it also generated the smallest 68 N · mm torque and 67.5％ cross-section deflection.The tensile strain in graft of 5-strut stent-graft during the process of bending was relatively smaller.Conclusions The strut number of Z-shaped stent-grafts has a significant influence on biomechanical properties of the stent-grafts.Especially the Z-shaped stent-graft with relatively fewer strut numbers shows an advantage in evaluating radial support performance and flexibility such as the bending torque and the cross-section deflection,and is more suitable to be anchored and fit to the tortuous blood vessel,which will play a positive role in decreasing the complication such as endoleaks and thrombosis.The research findings can guide structure design of Z-shaped stent-grafts and optimal selection for surgery.
ABSTRACT
Objective To analyze the influence from strut numbers on biomechanical properties of Z-shaped stentgrafts,especially on their radial support performance and flexibility,so as to provide theoretical support for the design and clinical selection of Z-shaped stent-grafts.Methods Z-shaped stent-grafts with 5,8,10,12 struts were established by finite element method to simulate the process of compression and bending behavior.Radial displacements were applied on surface of the stent-graft and opposite rotations were applied around the z-axis,until a bending angle of 40° was reached.Then parameters such as stent stress,radial support force,strains in graft,cross-section deflection,bending torque were extracted to evaluate the performance of different stentgrafts.Results Compared with stent-grafts with more strut numbers,5-strut stent-graft showed a better radial support performance with the maximum radial force during compression,and it also generated the smallest 68 N · mm torque and 67.5％ cross-section deflection.The tensile strain in graft of 5-strut stent-graft during the process of bending was relatively smaller.Conclusions The strut number of Z-shaped stent-grafts has a significant influence on biomechanical properties of the stent-grafts.Especially the Z-shaped stent-graft with relatively fewer strut numbers shows an advantage in evaluating radial support performance and flexibility such as the bending torque and the cross-section deflection,and is more suitable to be anchored and fit to the tortuous blood vessel,which will play a positive role in decreasing the complication such as endoleaks and thrombosis.The research findings can guide structure design of Z-shaped stent-grafts and optimal selection for surgery.
ABSTRACT
BACKGROUND: We investigated the effectiveness of fibular strut allograft augmentation of proximal humerus fractures to prevent varus deformity in patients over the age of 65 years with insufficient medial support. METHODS: We analyzed the clinical and radiological outcomes of locking plate fixation with adjunct fibular strut allograft augmentation in 21 patients with proximal humeral fractures. The inclusion criteria were age (65-year-old or older); presence of severe medial comminution; inadequate medial support; and those who could participate in at least a one year follow-up. The average age was 76.4 years. We analyzed each patient's Constant score, our indicator of clinical outcome. As radiological parameters, we analyzed time-to-bone union; restoration of the medial hinge; difference between the immediately postoperative and the last follow-up humeral neck-shaft angles;; and anatomical reduction status, which was assessed using the Paavolainen method. RESULTS: A successful bone union was achieved in all patients at an average of 11.4 weeks. We found that the average Constant score was 74.2, showing a satisfactory outcome. The average difference in the humeral neck-shaft angles between the immediately postoperative time-point and at the final follow-up was 3.09°. According to the Paavolainen method, the anatomical reduction was rated excellent. The medial hinge was restored in 14 of 21 patients. Although we did not find evidence for osteonecrosis, we found that a single patient had a postoperative complication of screw cut-out. CONCLUSIONS: Fibular strut allografting as an adjunct treatment of proximal humeral fractures may reduce varus deformity in patients with severe medial comminution.
Subject(s)
Humans , Allografts , Congenital Abnormalities , Follow-Up Studies , Humerus , Methods , Osteonecrosis , Postoperative Complications , Shoulder Fractures , Transplantation, HomologousABSTRACT
BACKGROUND: We investigated the effectiveness of fibular strut allograft augmentation of proximal humerus fractures to prevent varus deformity in patients over the age of 65 years with insufficient medial support. METHODS: We analyzed the clinical and radiological outcomes of locking plate fixation with adjunct fibular strut allograft augmentation in 21 patients with proximal humeral fractures. The inclusion criteria were age (65-year-old or older); presence of severe medial comminution; inadequate medial support; and those who could participate in at least a one year follow-up. The average age was 76.4 years. We analyzed each patient's Constant score, our indicator of clinical outcome. As radiological parameters, we analyzed time-to-bone union; restoration of the medial hinge; difference between the immediately postoperative and the last follow-up humeral neck-shaft angles;; and anatomical reduction status, which was assessed using the Paavolainen method. RESULTS: A successful bone union was achieved in all patients at an average of 11.4 weeks. We found that the average Constant score was 74.2, showing a satisfactory outcome. The average difference in the humeral neck-shaft angles between the immediately postoperative time-point and at the final follow-up was 3.09°. According to the Paavolainen method, the anatomical reduction was rated excellent. The medial hinge was restored in 14 of 21 patients. Although we did not find evidence for osteonecrosis, we found that a single patient had a postoperative complication of screw cut-out. CONCLUSIONS: Fibular strut allografting as an adjunct treatment of proximal humeral fractures may reduce varus deformity in patients with severe medial comminution.
Subject(s)
Humans , Allografts , Congenital Abnormalities , Follow-Up Studies , Humerus , Methods , Osteonecrosis , Postoperative Complications , Shoulder Fractures , Transplantation, HomologousABSTRACT
Proximal humerus fracture is one of the common fractures seen in practice. Being metaphyseal region, it is less prone for nonunion. Although more than 80% of these heal with no surgical intervention, displaced unimpacted surgical neck fractures are associated with a higher incidence of nonunion with rates varying from less than 1% to as high as 23%. We report a case of 35-year-old male with nonunion following fracture of left proximal humerus.
ABSTRACT
OBJECTIVE: Pterional craniotomy (PC) using myocutaneous (MC) flap is a simple and efficient technique; however, due to subsequent inferior displacement (ID) of the temporalis muscle, it can cause postoperative deformities of the muscle such as depression along the inferior margin of the temporal line of the frontal bone (DTL) and muscular protrusion at the inferior portion of the temporal fossa (PITF). Herein, we introduce a simple method for reconstruction of the temporalis muscle using a contourable strut plate (CSP) and evaluate its efficacy. MATERIALS AND METHODS: Patients at follow-ups between January 2014 and October 2014 after PCs were enrolled in this study. Their postoperative deformities of the temporalis muscle including ID, DTL, and PITF were evaluated. These PC cases using MC flap were classified according to two groups; one with conventional technique without CSP (MC Only) and another with reconstruction of the temporalis muscle using CSP (MC + CSP). Statistical analyses were performed for comparison between the two groups. RESULTS: Lower incidences of ID of the muscle (p < 0.001), DTL (p < 0.001), and PITF (p = 0.001) were observed in the MC + CSP than in the MC Only group. The incidence of acceptable outcome was markedly higher in the MC + CSP group (p < 0.001). ID was regarded as a causative factor for DTL and PITF (p < 0.001 in both). CONCLUSION: Reconstruction of the temporalis muscle using CSP after MC flap is a simple and efficient technique, which provides an outstanding outcome in terms of anatomical restoration of the temporalis muscle.
Subject(s)
Humans , Congenital Abnormalities , Craniotomy , Depression , Follow-Up Studies , Frontal Bone , Incidence , Myocutaneous FlapABSTRACT
PURPOSE: To report the results of surgical repairing of inferomedial orbital wall fractures accompanied with loss of bony strut by an overlapping method using Resorb X(R) plates (poly(D,L)-lactic acid). METHODS: To repair inferomedial orbital wall fractures with loss of bony strut, we bent the medial aspect of the plate for floor fracture according to the anatomical structure and then inserted the floor implant, which was supported by anterior, posterior and lateral margins of the floor fracture. Then, the medial implant, which was supported by the bent medial edge of the floor implant, was inserted. Postoperatively, we analyzed the outcomes of 21 patients regarding postoperative enophthalmos, limitation of eye movement (LOM) and diplopia. The diagonal lengths of the orbit in the operated side were compared with the non-traumatized side based on the coronal view of the postoperative CT scans to determine the success or failure of the reconstruction. RESULTS: The average postoperative enophthalmic value was 0.5 mm, and no significant differences between the orbital diagonal lengths of the operated and non-operated eyes were observed. The LOM shown in 7 out of 8 patients was completely resolved during the postoperative follow-up period. All patients with diplopia, including one patient who showed partial remission of LOM, experienced complete symptom resolution. No other complications related to the implant were recorded. CONCLUSIONS: Inferomedial orbital wall fractures with the loss of bony strut can be successfully repaired by the overlapping method using Resorb X(R) implants.
Subject(s)
Humans , Diplopia , Enophthalmos , Eye , Eye Movements , Floors and Floorcoverings , Follow-Up Studies , Orbit , Orbital ImplantsABSTRACT
OBJECTIVE: Although removal of the anterior clinoid process (ACP) is essential surgical technique, studies about quantitative measurements of the space broadening by the anterior clinoidectomy are rare. The purposes of this study are to investigate the dimension of the ACP, to quantify the improved exposure of the parasellar space after extradural anterior clinoidectomy and to measure the correlation of each structure around the paraclinoidal area. METHODS: Eleven formalin-fixed Korean adult cadaveric heads were used and frontotemporal craniotomies were done bilaterally. The length of C6 segment of the internal carotid artery on its lateral and medial side and optic nerve length were checked before and after anterior clinoidectomy. The basal width and height of the ACP were measured. The relationships among the paraclinoidal structures were assessed. The origin and projection of the ophthalmic artery (OA) were investigated. RESULTS: The mean values of intradural basal width and height of the ACP were 10.82 mm and 7.61 mm respectively. The mean length of the C6 lateral and medial side increased 49%. The mean length of optic nerve increased 97%. At the parasellar area, the lengths from the optic strut to the falciform liament, distal dural ring, origin of OA were 6.69 mm, 9.36 mm and 5.99 mm, respectively. The distance between CN III and IV was 11.06 mm. CONCLUSION: With the removal of ACP, exposure of the C6 segments and optic nerve can expand 49% and 97%, respectively. This technique should be among a surgeon's essential skills for treating lesions around the parasellar area.
Subject(s)
Adult , Humans , Cadaver , Carotid Artery, Internal , Craniotomy , Head , Ophthalmic Artery , Optic NerveABSTRACT
PURPOSE: This study was aimed to evaluate the result of inlay cortical strut bone grafts for large cysts or cavitary bone lesions in long bones. MATERIALS AND METHODS: Seven patients with large cyst or cavitary bony lesions were managed with curettage, allogeneic inlay cortical strut and cancellous bone grafts. Additional plate and screw fixations were performed in 6 patients. There were three SBCs, two FDs with secondary ABC changes, one FD and one post-cement spacer removal state. Three of them had pathologic fractures. Progression of bone healing and mechanical support and functional result were evaluated. The mean follow-up period was 25.4 months. RESULTS: Incorporations into host bones were progressed in all, average 4.2 months in six metaphyseal regions and 5.8 months in five diaphyseal regions respectively. Full structural supports were achieved in all except one patient without any additional procedures. No allograft-related complication was developed. Mean functional score according to the MSTS criteria was 29.6 at last follow up. CONCLUSION: Inlay cortical strut graft provided additional mechanical stability and bone stock for screw purchase in large cyst or cavitary defects of long bones, which allow early mobilization and excellent functional outcome.
Subject(s)
Humans , Bone Cysts , Curettage , Early Ambulation , Follow-Up Studies , Fractures, Spontaneous , Inlays , TransplantsABSTRACT
PURPOSE: Most surgeons have used autogenous cartilage for columella strut graft. But the supply of autogenous cartilage is often limited. So, this study is to investigate the usefulness of biodegradable plate as columella strut material. METHODS: We studied 19 patients who have secondary cleft nasal deformity. Patients were divided into two groups. Group A patients who were not closed their growth plate underwent columella strut graft only with biodegradable plate through endonasal approach. The biodegradable plate was inserted between nasal tip and anterior nasal spine. Group B patients were closed their growth plate. They had an operation for columella strut graft with biodegradable plate fixed with autogenous conchal cartilage. If nasal tip projection was insufficient, we performed additionally onlay graft on nasal tip with autogenous soft tissue or remnant cartilage. RESULTS: As a result of mean 14 months follow-up, we achieved a good nasal tip projection, narrowing of interalar distance and symmetrical nostril shape. No specific complications were reported except 2 cases, which were the extrusion of biodegradable plate into the nasal cavity and Staphylococcus aureus infection. CONCLUSION: The columella strut graft using biodegradable plate is simple and effective method. Biodegradable plate can be a good substitute for columella strut in patients who can not use autogenous cartilages.