Extraction of geraniol from palmarosa oil using hydrotropic solvents / Extracción de geraniol del aceite de palmarosa utilizando solventes hidrotrópicos

The extraction of geraniol from palmarosa oil using hydrotropic solvents was investigated. Palmarosa oil possesses an appealing rose aroma and properties like anti - inflammatory, antifungal, and antioxidant due to the presence of geraniol. The extraction of geraniol from palmarosa oil by using distillation methods like steam dis tillation and fractional distillation was a laborious process. So hydrotropes were tried for extraction. The geraniol yield and purity depend on parameters like concentration of hydrotrope, solvent volume ratio, and time period. Using the Box Benkhem Desig n (BBD), the extraction process was optimized. One of the major advantages of using hydrotropic solvents is that they were classified as green solvents, and recovery of solvents is also possible. To reduce the extraction time probe sonication is carried ou t. Different hydrotropic solvents with probe sonication are done on palmarosa oil by altering various process parameters to study the separation, yield, and purity.

Se investigó la extracción de geraniol del aceite de palmarosa utilizando solventes hidrotrópicos. El aceite de palmarosa posee un atractivo aroma a rosa y propiedades antiinflamatorias, antifúngicas y antioxidantes debido a la pr esencia de geraniol. La extracción de geraniol del aceite de palmarosa mediante métodos de destilación como la destilación por vapor y la destilación fraccionada ha sido un proceso laborioso. Por lo tanto, se probaron los hidrotropos para la extracción. El rendimiento y la pureza del geraniol dependen de parámetros como la concentración del hidrotropo, la relación de volumen del solvente y el período de tiempo. Se optimizó el proceso de extracción usando el diseño Box Benkhem (BBD). Una de las principales v entajas de usar solventes hidrotrópicos es que se clasifican como solventes verdes y también es posible recuperar los solventes. Para reducir el tiempo de extracción, se lleva a cabo una sonda de ultrasonido. Se realizan diferentes solventes hidrotropos co n sonda de ultrasonido en el aceite de palmarosa alterando varios parámetros del proceso para estudiar la separación, el rendimiento y la pureza.

Mapeamento do Potencial da Superfície Corporal durante a Despolarização Ventricular em Atletas com Intervalo PQ Prolongado após Exercício / Body Surface Potential Mapping during Ventricular Depolarization in Athletes with Prolonged PQ Interval after Exercise

Resumo Fundamento: O prolongamento do intervalo PQ, geralmente associado a um atraso na condução atrioventricular, pode estar relacionado a alterações na propagação do impulso intraventricular. Objetivo: Avaliar, por meio do mapeamento do potencial de superfície corporal (BSPM), o processo de despolarização ventricular em atletas com intervalos PQ prolongados em repouso e após o exercício. Métodos: O estudo incluiu 7 esquiadores cross-country com intervalo PQ superior a 200 ms (grupo PQ Prolongado) e 7 com intervalo PQ inferior a 200 ms (grupo PQ Normal). O BSPM de 64 derivações unipolares do tronco foi realizado antes (Pré-Ex) e após o teste ergométrico de bicicleta (Pós-Ex). Mapas equipotenciais da superfície corporal foram analisados durante a despolarização ventricular. O nível de significância foi de 5%. Resultados: Comparado com atletas com PQ Normal, o primeiro e o segundo períodos de posição estável dos potenciais cardíacos na superfície do tronco foram mais longos, e a formação da distribuição de potencial "sela" ocorreu mais tarde, no Pré-Ex, nos atletas com PQ Prolongado. No Pós-Ex, o grupo PQ Prolongado apresentou um encurtamento do primeiro e segundo períodos de distribuições de potencial estáveis e uma diminuição no tempo de aparecimento do fenômeno "sela" em relação ao Pré-Ex (para valores próximos aos do Normal -Grupo PQ). Além disso, no Pós-Ex, a primeira inversão das distribuições de potencial e a duração total da despolarização ventricular em atletas com PQ Prolongado diminuíram em comparação com o Pré-Ex e com valores semelhantes em atletas com PQ Normal. Em comparação com atletas com PQ Normal, a segunda inversão foi mais longa no Pré-Ex e Pós-Ex em atletas com PQ Prolongado. Conclusão: Atletas com PQ prolongado apresentaram diferenças significativas nas características temporais do BSPM durante a despolarização ventricular, tanto em repouso quanto após o exercício, em comparação com atletas com PQ normal.

Abstract Background: Prolongation of the PQ interval, generally associated with an atrioventricular conduction delay, may be related to changes in intraventricular impulse spreading. Objective: To assess, using body surface potential mapping (BSPM), the process of ventricular depolarization in athletes with prolonged PQ intervals at rest and after exercise. Methods: The study included 7 cross-country skiers with a PQ interval of more than 200 ms (Prolonged-PQ group) and 7 with a PQ interval of less than 200 ms (Normal-PQ group). The BSPM from 64 unipolar torso leads was performed before (Pre-Ex) and after the bicycle exercise test (Post-Ex). Body surface equipotential maps were analyzed during ventricular depolarization. The significance level was 5%. Results: Compared to Normal-PQ athletes, the first and second periods of the stable position of cardiac potentials on the torso surface were longer, and the formation of the "saddle" potential distribution occurred later, at Pre-Ex, in Prolonged-PQ athletes. At Post-Ex, the Prolonged-PQ group showed a shortening of the first and second periods of stable potential distributions and a decrease in appearance time of the "saddle" phenomenon relative to Pre-Ex (to the values near to those of the Normal-PQ group). Additionally, at Post-Ex, the first inversion of potential distributions and the total duration of ventricular depolarization in Prolonged-PQ athletes decreased compared to Pre-Ex and with similar values in Normal-PQ athletes. Compared to Normal-PQ athletes, the second inversion was longer at Pre-Ex and Post-Ex in Prolonged-PQ athletes. Conclusion: Prolonged-PQ athletes had significant differences in the temporal characteristics of BSPM during ventricular depolarization both at rest and after exercise as compared to Normal-PQ athletes.

Effect of the staging comprehensive treatment with acupuncture-moxibustion on Bell's facial palsy in the acute stage / 中国针灸

OBJECTIVES@#To compare the clinical effect on Bell's facial palsy in the acute stage between the staging comprehensive treatment with acupuncture-moxibustion and western medication.@*METHODS@#Sixty patients with Bell's facial palsy in the acute stage were randomly divided into an observation group and a control group, with 30 cases in each one. The patients in the control group were administered orally with prednisone acetate tablets and methylcobalamin tablets until the 28th day of illness. In the observation group, the staging comprehensive treatment with acupuncture-moxibustion was adopted. On the affected side, Qianzheng (EX-HN 16), Yifeng (TE 17), Sibai (ST 2), Yangbai (GB 14), Jiache (ST 6), Dicang (ST 4) and Touwei (ST 8), etc. were stimulated. In the acute stage (Day 1 to 7 of illness), the routine acupuncture and the point-toward-point needle insertion were delivered, no any manipulation was exerted at acupoints, and the needles were retained for 30 min. In the subacute stage (Day 8 to 14 of illness), on the base of the treatment as the acute stage, the depth of needle insertion was adjusted at a part of acupoints and the even needling technique was operated by twisting needle. Besides, electroacupuncture (EA) was attached to Qianzheng (EX-HN 16) and Dicang (ST 4), with continuous wave of low intensity and high frequency, 100 Hz, for 20 min. In the recovery stage (Day 15 to 28 of illness), on the base of the treatment as the subacute stage, the heavy stimulation of acupuncture was given, in which, the sticking and lifting needle techniques were delivered after the needles were inserted from Sibai (ST 2) toward Dicang (ST 4), and from Dicang (ST 4) toward Jiache (ST 6), separately; warm needling was operated at Yifeng (TE 17), and EA changed to stimulate the acupoints with the intermittent wave of high intensity and low frequency, 2 Hz, for 30 min. Acupuncture-moxibustion was given once every other day until the end of the 28th day of illness. The level of House-Brackmann facial nerve function rating scale (H-B grade),the score of Sunnybrook facial nerve grading system (Sunnybrook), the score of facial disability index (FDI), the temperature difference in the infrared thermal imaging facial area and electromyogram (EMG) situation of the affected muscle group were observed before and after treatment in the two groups. Using musculoskeletal ultrasound,the facial nerve diameter was detected and the clinical effect was compared between the two groups.@*RESULTS@#After treatment, the level of H-B grade, Sunnybrook score, the scores of physical function and social life function in FDI were improved when compared with those before treatment in the patients of either group (P<0.01, P<0.05), and the results of these evaluations in the observation group were better than those of the control group (P<0.05). After treatment, the temperature difference of the frontal area, the eye area, the zygomatic area and the mouth corner was declined in comparison with that before treatment in the two groups (P<0.05), and the temperature difference in each area in the observation group was lower than that of the control group (P<0.05).The root mean square (RMS) of the frontal muscle group, the zygomatic muscle group and the orbicularis muscle group on the affected side increased in comparison with that before treatment in the two groups (P<0.01), and RMS of the observation group was higher than that of the control group (P<0.05) after treatment. Before treatment, the diameter of the facial nerve on the affected side was larger than that on the healthy side (P<0.01), and after treatment, the diameter on the affected side was reduced when compared with that before treatment in the two groups (P<0.01); the diameter of the facial nerve on the affected side in the observation group was smaller than that of the control group (P<0.05), while, the diameter on the affected side was larger when compared with the healthy side in the control group (P<0.05). The total effective rate of the observation group was 93.3% (28/30), higher than that of the control group (83.3% [25/30], P<0.05).@*CONCLUSIONS@#The staging comprehensive treatment with acupuncture-moxibustion is clearly effective on Bell's facial palsy in the acute stage, which affirms the effectiveness of acupuncture-moxibustion for the acute stage of Bell's facial palsy in comparison with conventional western medication.

Optimization of Decoction Technology and Establishment of Quality Standard for Moringa oleifera Leaf Standard Decoction / 中国实验方剂学杂志

ObjectiveBased on response surface methodology combined with principal component analysis（PCA）， the optimal decocting process of Moringa oleifera leaf standard decoction was optimized， and its multi-index quality evaluation system was established， in order to provide scientific basis for the quality control of this standard decoction. MethodResponse surface methodology and PCA were used to optimize the decoction process by taking the relative peak areas of 8 characteristic peaks and dry extract yield as indexes. Based on this， the quality of 15 batches of the standard decoction was evaluated by high performance liquid chromatography（HPLC） characteristic chromatogram， determination of major components（neochlorogenic acid， L-tryptophan， cryptochlorogenic acid， vicenin-2， isoquercetin， astragalin）， determination of active parts（total flavonoids， total organic acids， total polysaccharides， total α-amino acids， total sinapine）， dry extract yield， specific gravity and pH. ResultThe optimal decocting process was to soak M. oleifera leaves（100.00 g） for 30 min and decoct twice with the first decoction of 12 times the amount of water for 30 min and the second decoction of 10 times the amount of water for 20 min. Standard decoction containing 0.2 g·mL-1 of crude drug was defined by x¯±30%， the specific gravity was 0.722-1.340， pH was 3.86-7.16， dry extract yield was 23.1%-42.9%， and the alcohol-soluble extract content was 8.26%-15.34%. Calculated according to the dried products of the standard decoction， the contents of neochlorogenic acid， L-tryptophan， cryptochlorogenic acid， vicenin-2， isoquercetin and astragalin were 1.99-3.69， 1.20-2.22， 1.44-2.67， 0.53-0.99， 2.45-4.55， 1.22-2.26 mg·g-1， the relative transfer rates relative to the herbs were 34.37%-63.83%， 62.43%-115.94%， 64.65%-120.06%， 56.98%-105.82%， 37.46%-69.57%， 41.81%-77.64%， respectively. The contents of total flavonoids， total organic acids， total polysaccharides， total α-amino acids， total sinapine were 10.19-18.92， 11.82-21.96， 94.07-174.71， 42.69-79.27， 9.55-17.73 mg·g-1， the relative transfer rates for herbs were 25.72%-47.77%， 41.78%-77.59%， 64.90%-120.54%， 42.30%-78.57%， 34.99%-64.99%， respectively. ConclusionThe optimized decocting technology of M. oleifera leaf standard decoction is stable and feasible， and the established multi-indicator quality evaluation system can lay the foundation for the quality control of this standard decoction.

Effect of electrochemically dealloying Ti6Al4V abutments on human gingival fibroblasts / 口腔疾病防治

Objective@#To investigate the effects of electrochemically dealloying of Ti6Al4V abutments on human gingival fibroblasts (HGFs) and to provide experimental evidence for surface modification of implant abutments.@*Methods@#The samples were divided into an NC group (negative control, no other treatment on a smooth surface), an NM-1 group (nanomesh-1, electrochemical dealloying treatment in 1 mol/L NaOH 1 h on 2 V voltage), and an NM-2 group (nanomesh-2, electrochemical dealloying treatment in 5 mol/L NaOH 1 h on 2 V voltage). The surface morphologies of the samples and the adhesion of HGFs on the sample surfaces were observed with scanning electron microscopy (SEM). The surface hydrophilicities of the samples were measured with a contact angle measuring instrument. The proliferation of HGFs on the different samples were evaluated with CCK-8, and the expression of adhesion-related genes, including collagen Ⅰ (COL1A1), collagen Ⅲ (COL3A1), fibronectin 1 (FN1), focal adhesion kinase (FAK), vinculin (VCL), integrin α2 (ITGA2), and integrin β1 (ITGB1), on the different samples was measured with qRT-PCR. The expression of vinculin on the surfaces of HGFs was observed via confocal laser scanning microscopy (CLSM) after immunofluorescent staining. Collagen fiber secretion and syntheses of HGFs from different samples were evaluated via Sirius red staining.@*Results@#SEM revealed the formation of ordered and uniform three-dimensional mesh structures on the surfaces of the NM-1 and NM-2 groups, with grid diameters of approximately 30 nm for the NM-1 group and approximately 150 nm for the NM-2 group. Compared with that of the NC group, the water contact angles of the NM-1 group and NM-2 groups were significantly lower (P<0.000 1). Cell proliferation in the NM-1 group was significantly greater than that in the NC group (P<0.01). Moreover, there was no significant difference in the water contact angles or cell proliferation between the NM-1 group and the NM-2 group. SEM revealed that HGFs were adhered well to the surfaces of all samples, while the HGFs in the NM-1 and NM-2 groups showed more extended areas, longer morphologies, and more developed pseudopodia than did those in the NC group after 24 h. qRT-PCR revealed that the expression levels of the adhesion-related genes COL1A1, COL3A1, FN1, FAK and VCL in the NM-1 group were significantly greater than those in the NC and NM-2 groups (P<0.01). The expression of vinculin protein in the NM-1 group was the highest, and the number of focal adhesions was greatest in the NM-1 group (P<0.01). The results of Sirius red staining showed that the NM-1 group had the highest secretion and syntheses of collagen fibers (P<0.000 1).@*Conclusion@#The three-dimensional nanomechanical structure of Ti6Al4V modified by electrochemical dealloying promoted the adhesion, proliferation, collagen fiber secretion and syntheses of HGFs, and electrochemical dealloying of Ti6Al4V with a grid diameter of approximately 30 nm obviously promoted HGF formation.

Correlation between ocular surface status and blood lipids in patients with meibomian gland dysfunction during pregnancy / 国际眼科杂志(Guoji Yanke Zazhi)

AIM: To analyze the correlation between ocular surface status and serum lipids in patients with meibomian gland dysfunction(MGD)during pregnancy, and to provide new ideas for the management and treatment of MGD during pregnancy.METHODS: Totally 120 pregnant women(240 eyes)treated in our hospital from May 2021 to May 2022 were selected and they were divided into MGD group(60 cases, 120 eyes)and control group(60 cases, 120 eyes)according to the presence or absence of MGD. All subjects received the ocular surface disease index scores(OSDI)and underwent examinations of meibomian gland morphology and function, tear film and blood lipid.RESULTS: The scores of OSDI, the related indexes of meibomian gland, corneal fluorescein staining(FL)scores, total cholesterol(TC), triglyceride(TG)and low density lipoprotein-cholesterol(LDL-C)in the MGD group were significantly higher than those in the control group(P&#x0026;#x003C;0.05). The scores of fluorescein breakup time(FBUT), Schirmer Ⅰ test(SIt)and high-density lipoprotein cholesterol(HDL-C)in the MGD group were significantly lower than those in the control group(P&#x0026;#x003C;0.05). Correlation analysis showed that the scores of TG, TC, LDL-C were negatively correlated with the values of FBUT(rs =-0.702, -0.647, -0.710, all P&#x0026;#x003C;0.001).CONCLUSION: The level of blood lipids in pregnant patients with MGD is significantly increased, and the levels of TC, TG and LDL-C may be related to the stability of tear film.

Safety and efficacy of 0.01% hypochlorous acid before cataract phacoemulsification / 国际眼科杂志(Guoji Yanke Zazhi)

AIM: To evaluate the efficacy of 0.01% hypochlorous acid as a conjunctival sac disinfectant before cataract phacoemulsification and its impact on the ocular surface.METHODS: Randomized controlled clinical trial. A total of 285 patients who were scheduled for cataract phacoemulsification surgery were randomly divided into the hypochlorous acid group and the povidone iodine group. Before and after disinfection, conjunctival sac swabs were taken, and bacterial culture and colony-forming units(CFUs)testing were performed using blood agar and chocolate agar media, respectively. All patients were evaluated for ocular symptom scores and pain severity scores 2 h, 1 d, and 1 wk after disinfection, and underwent corneal fluorescein staining, eye redness index, tear meniscus height, and noninvasive breakup time(NIBUT)examination. The incidence of endophthalmitis after surgery was recorded.RESULTS: Conjunctival sac disinfection with 0.01% hypochlorous acid significantly reduced the rate of positive bacterial cultures and colony-forming ability of the conjunctival sac, with statistically significant differences compared with the pre-disinfection period(both P&#x0026;#x003C;0.01), and the disinfecting ability of hypochlorous acid was comparable to that of povidone-iodine(χ2=0.811, P=0.368). The scores of ocular symptoms and pain severity in the hypochlorous acid group were significantly lower than those in the povidone-iodine group(both P&#x0026;#x003C;0.01). The corneal fluorescein staining and eye redness index in the hypochlorous acid group were significantly lower than those in the povidone-iodine group(all P&#x0026;#x003C;0.01). No endophthalmitis occurred in either group of patients. CONCLUSION: As a conjunctival sac disinfectant, 0.01% hypochlorous acid is safe and effective, with minimal discomfort and damage to the ocular surface in patients.

Evaluation of asymptomatic ocular surface disorders in hospitalized patients with primary pterygium before surgery / 国际眼科杂志(Guoji Yanke Zazhi)

AIM: To investigate the preoperative ocular symptoms and the characteristics of asymptomatic ocular surface abnormalities in hospitalized patients with primary pterygium.METHODS: Cross-sectional study. Hospitalized patients diagnosed with primary pterygium and scheduled to receive pterygium excision surgery at the Xiamen Eye Center of Xiamen University from August 2022 to October 2022 were enrolled. Ocular surface disease index questionnaire(OSDI), six examinations including non-invasive tear film break-up time, Schirmer I test, tear meniscus height, lid margin abnormality, meibomian gland dropout and tear film lipid layer thickness, and anterior segment optical coherence tomography(AS-OCT)were performed and statistically analyzed.RESULTS: A total of 178 cases(178 eyes), with a mean age of 54.39±10.75 years old, were recruited, including 75 males(42.1%)and 103 females(57.9%). The average values of ocular surface parameters in these patients included OSDI: 11.47±9.69, tear film break-up time: 7.10±3.86 s; tear meniscus height: 0.16±0.07 mm, Schirmer I test values: 14.39±7.29 mm/5 min, and pterygium thickness: 504.74±175.87 μm. Totally 161 eyes(90.4%)presented with abnormal lid margin, 44 eyes(24.7%)presented with meibomian gland dropout score ≥4, 52 eyes(29.2%)presented with low lipid layer thickness. In the 6 objective examinations, abnormalities in at least 4 of these tests were found in 85.4% of eyes. Pterygium morphology was classified into four grades: 10 eyes(5.6%)of grade Ⅰ, 93 eyes(52.2%)of grade Ⅱ, 60 eyes(33.7%)of grade Ⅲ, and 15 eyes(8.4%)of grade Ⅳ. In patients with a higher grade of pterygium, the tear film break-up time was lower, and the proportion of abnormal lid margin was also significantly higher(P&#x0026;#x003C;0.05). The patients were further divided into two subgroups, including 121 eyes(68.0%)with normal OSDI &#x0026;#x003C;13 in the normal group and 57 eyes(32.0%)with OSDI ≥13 in the abnormal group. No significant difference was found in the proportion of meibomian gland dysfunction between the two groups of patients(71.9% vs. 71.9%, P=0.872). In addition, there were differences in the number of abnormal objective examinations(4.11±0.85 vs. 4.91±0.99, P&#x0026;#x003C;0.001).CONCLUSIONS: Asymptomatic ocular surface abnormalities were present preoperatively in patients hospitalized for primary pterygium. A comparable high incidence of structural or functional meibomian gland dysfunction existed in pterygium patients with or without apparent ocular discomfort. More attention should be paid to the ocular surface abnormalities in those asymptomatic patients before primary pterygium surgery.

Research progress on dental materials for preventing root caries / 口腔疾病防治

@#The high incidence and untreated rate of root caries, a common and frequently occurring oral disease with challenging treatment in elderly individuals, is the main cause of tooth loss among elderly people, as rapid development results in pulpitis and periapical periodontitis or residual crown and root, which has been regarded as one of the common chronic oral diseases seriously affecting the quality of life of elderly people. Thus, early intervention and prevention are important. Traditional dental materials for preventing root caries have been widely used in clinical practice; however, they have the disadvantages of tooth coloring, remineralization and low sterilization efficiency. A series of new dental materials for preventing root caries have gradually become a research hotspot recently, which have the advantages of promoting the mineralization of deep dental tissue, prolonging the action time and enhancing adhesion. Future caries prevention materials should be designed according to the characteristics of root surface caries and the application population and should be developed toward simplicity, high efficiency and low toxicity. This review describes current research regarding anti-caries prevention material application, serving as a theoretical underpinning for the research of root caries prevention materials, which is important for both promotion in the effective prevention of root caries and improvement in the status of oral health and the quality of life among old people.

Biosensor analysis technology and its research progress in drug development of Alzheimer's disease / 药学学报

Biosensor analysis technology is a kind of technology with high specificity that can convert biological reactions into optical and electrical signals. In the development of drugs for Alzheimer's disease (AD), according to different disease hypotheses and targets, this technology plays an important role in confirming targets and screening active compounds. This paper briefly describes the pathogenesis of AD and the current situation of therapeutic drugs, introduces three biosensor analysis techniques commonly used in the discovery of AD drugs, such as surface plasmon resonance (SPR), biolayer interferometry (BLI) and fluorescence analysis technology, explains its basic principle and application progress, and summarizes their advantages and limitations respectively.

Transcriptional differential analysis of ocular surface ectoderm and surface ectoderm / 国际眼科杂志(Guoji Yanke Zazhi)

AIM:To identify transcriptional differences between the ocular surface ectoderm(OSE)and surface ectoderm(SE)using RNA-seq, and elucidate the OSE transcriptome landscape and the regulatory networks involved in its development.METHODS:OSE and SE cells were differentiated from human embryonic stem(hES)cells. Differentially expressed genes(DEGs)between OSE and SE were analyzed using RNA-seq. Based on the DEGs, we performed gene ontology(GO)analysis, Kyoto Encyclopedia of Genes and Genomes(KEGG)pathway enrichment analysis, and protein-protein interaction(PPI)network analysis. Transcription factors(TFs)and hub genes were screened. Subsequently, TF-gene and TF-miRNA regulatory networks were constructed using the NetworkAnalyst platform.RESULTS:A total of 4 182 DEGs were detected between OSE and SE cells, with 2 771 up-regulated and 1 411 down-regulated genes in OSE cells. GO-BP analysis revealed that up-regulated genes in OSE were enriched in the regulation of ion transmembrane transport, axon development, and modulation of chemical synaptic transmission. Down-regulated genes were primarily involved in nuclear division, chromosome segregation, and regulation of cell cycle phase transition. KEGG analysis indicated that up-regulated genes in OSE cells were enriched in signaling pathways such as cocaine addiction, axon guidance, and amphetamine addiction, while down-regulated genes were enriched in proteoglycans in cancer, ECM-receptor interaction, protein digestion and absorption, and cytokine-cytokine receptor interaction. Additionally, compared with SE, 204 TFs(including FOS, EGR1, POU5F1, SOX2, and PAX6)were up-regulated, and 80 TFs(including HAND2, HOXB6, HOXB5, HOXA5, and HOXB8)were down-regulated in OSE cells. Furthermore, we identified 6 up-regulated and 9 down-regulated hub genes in OSE cells, and constructed TF-gene and TF-miRNA regulatory networks based on these hub genes.CONCLUSIONS:The transcriptome characteristics of OSE and SE cells were elucidated through RNA-seq analysis. These findings may provide a novel insight for studies on the development and in vitro directed induction of OSE and corneal epithelial cells.

Study on extraction technology of Sophora flavescens-Phellodendron chinense drug pair / 中国药房

OBJECTIVE To study the extraction technology of Sophora flavescens-Phellodendron chinense drug pair and provide a reference for the development of new drugs for the treatment of anorectal diseases. METHODS Using the contents of total alkaloids of S. flavescens （matrine+oxymatrine）， berberine hydrochloride and total flavonoid， and extract yield as evaluation indicators， analytic hierarchy process-entropy weight method was used to calculate the weight coefficient of each indicator， and was combined with Box-Behnken design-response surface method to study the extraction technology of S. flavescens-P. chinense drug pair and verify it. RESULTS The optimal extraction technology of S. flavescens-P. chinense drug pair was immersed in 12-fold amount of 58% ethanol for 30 minutes and extracted twice， each time for 120 minutes. The relative error between the verification experimental results and the predicted value was 1.88%. CONCLUSIONS The obtained extraction technology is stable and feasible and can provide reference for the application of S. flavescens-P. chinense drug pair and development of new drugs.

Preparation and in vitro dissolution behaviors evaluation of silymarin phospholipid complex / 药学实践杂志

Objective To prepare silymarin phospholipids complex（SM-PC） and investigate its physicochemical properties. Methods On the basis of single-factor tests, the drug-lipid ratio, drug concentration and reaction temperature were selected as the factors of the central composite design and response surface methodology in the preparation of SM-PC by solvent volatilization, and the best process was optimized with the compound rate as the index. And its in vitro dissolution was measured. Results The optimum preparation technology of SM-PC was as follows: acetone was used as compound solvent, the concentration of SM was 8.0 mg/ml, the mass ratio of SM to phospholipid was 1∶1.8, the reaction temperature was 56 ℃ and the recombination rate was（95.15±1.55）% with deviation of less than 3%. The in vitro dissolution test showed that the dissolution of SM-PC was close to 90% in 60 min. The dissolution behavior of main component of silybin was similar to that of silymarin capsules（Legalon ®）, which was higher than SM-API. Conclusion SM-PC was successfully prepared by central composite design response surface method, which significantly improved the dissolution and laid a foundation for the study of subsequent preparations.

Analysis of uranium concentration in surface water and drinking water in Beijing, China / 中国辐射卫生

Objective To explore the uranium concentration in surface water and drinking water in Beijing, China and the relationship between uranium concentration and gross α activity concentration. Methods Water samples were collected from 16 districts in Beijing. Uranium concentration and gross α activity concentration were measured with WGJ-III trace uranium analyzer and LB6008 six-channel α/β counter using the ultraviolet fluorescence and thick source methods. Results The uranium concentrations in surface water and drinking water were 1.131 and 1.572 μg/L, respectively. The gross α activity concentrations in surface water and drinking water were 0.059 and 0.074 Bq/L, respectively. There were no significant differences in uranium concentration and gross α activity concentration between surface water and drinking water (P > 0.05). The uranium concentration was positively correlated with the gross α activity concentration, with a correlation coefficient of 0.700 (P < 0.05). The gross α activity concentration was determined by the uranium concentration with a determination coefficient of 48%. The committed effective dose of 238U in drinking water was between 3.284 × 10−5 and 1.640 × 10−3 mSv, with an average value of 5.400 × 10−4 mSv. Conclusion The uranium concentration and gross α activity in the surface water and drinking water in Beijing fluctuate and remain in the background range. These values are much lower than the recommended limits of 0.03 mg/L and 0.5 Bq/L stipulated in the GB 5749-2021 Standard for Drinking Water Quality. The annual committed effective dose of 238U through drinking water ingestion is very small.

Comparative study of physical-chemical properties of bioactive glass ionomer cement

Abstract This study analyzed the physical-chemical properties of bioactive ionomer materials. Cention N bioactive materials were evaluated chemically activated (CN) and light-cured (CN-LC), Equia Forte Fill (EQUI); conventional resin composite Filtek Z350 XT (Z350); resin glass ionomer cement Riva light Cure (RIVA) and flowable resin composite Filtek Bulk Fill Flow (BULK-F) were evaluated. Sixty specimens (n=10) were prepared for sorption (SR), solubility (SL), flexural strength (FS), shrinkage stress (SS), conversion degree (CD), microhardness (MI), and surface roughness (SR) tests. Non-cured and light-cured materials were assessed on FTIR. 30 human molar teeth were used in the bond strength test (BS). Data were subjected to ANOVA and post-hoc Tukey's test (5% of significance). EQUI showed more sorption in SR and no statistical difference from RIVA and CN-LC. CN group showed more solubility and EQUI presented less (p<0.05). BULK-F showed higher FS (MPa), without differences from CN and Z350, whereas EQUI presented the lowest FS not differing from RIVA. BULK-F and CN-LC showed more shrinkage stress differing from EQUI. CN-LC and CN showed higher CD differing from the other which showed no differences (p>0.05) between them. EQUI showed the highest hardness (p<0.05) in MI. There were no differences (p>0.05) in SR (µm). Z350 and BULK-F presented higher BS, whereas CN-LC showed the lowest, although not differing from EQUI and RIVA. Equia Forte's solubility and microhardness make it a good alternative as a restorative material. Cention N degree of conversion and flexural strength making it an esthetic option to amalgam.

Resumo Este estudo analisou as propriedades físico-químicas dos materiais de ionômero bioativo. Os materiais bioativos Cention N quimicamente ativados (CN) e fotopolimerizados (CN-LC), Equia Forte Fill (EQUI); resina composta convencional Filtek Z350 XT (Z350); resina de ionômero de vidro Riva light Cure (RIVA) e resina composta fluida Filtek Bulk Fill Flow (BULK-F) foram avaliados. Sessenta espécimes (n=10) foram preparados para testes de sorção (SR), solubilidade (SL), resistência à flexão (FS), tensão de contração (SS), grau de conversão (CD), microdureza (MI) e rugosidade da superfície (SR). Os materiais não curados e curados com luz foram avaliados por FTIR. 30 dentes molares humanos foram usados no teste de resistência de união (BS). Os dados foram submetidos a ANOVA e teste de post-hoc Tukey (5% de significância). O EQUI apresentou maior sorção no SR e não mostrou diferença estatística em relação aos grupos RIVA e CN-LC. O grupo CN apresentou maior solubilidade e o EQUI apresentou menor (p<0,05). O BULK-F apresentou maior FS (MPa), sem diferir do CN e do Z350, enquanto o EQUI apresentou o menor FS, não diferindo do RIVA. O BULK-F e o CN-LC apresentaram maior estresse de contração, diferindo do EQUI. O CN-LC e o CN apresentaram maior CD (%), diferindo dos demais, que não apresentaram diferenças (p>0,05) entre si. A EQUI apresentou a maior dureza (p<0,05) no MI. Não houve diferenças (p>0,05) na SR (µm). Z350 and BULK-F apresentaram BS, enquanto a CN-LC apresentou a menor, embora não diferindo da EQUI e da RIVA. A solubilidade e a microdureza do Equia Forte o tornam uma boa alternativa como material restaurador. O grau de conversão e a resistência à flexão do Cention N o tornam uma opção estética ao amálgama.

Surface treatments of the zirconia-reinforced lithium disilicate ceramic in the adhesion to the resin cement

Abstract This study verified the effect of surface treatments of the zirconia-reinforced lithium disilicate ceramic bonded to resin cement. Ceramic blocks were divided according to treatments (n=10): FA+SRX (Fluoric acid + silane RX), FA+MDP (Fluoric acid + MDP), FA+SCF+MDP (Fluoric acid + silane CF + MDP), FA+MEP (Fluoric acid + MEP), and MEP (Self-etch primer). Resin cement cylinders were made in the ceramic blocks, photoactivated with 1,200 mW/cm² for 40s, stored in water at 37°C for 24h, and evaluated by the microshear strength test, optical failure descriptive analysis (%), surface characterization (SEM) and contact angle (Goniometer). Other samples were submitted to 10,000 thermocycles between 5°C and 55°C. Bond strength data were submitted to two-way ANOVA and Tukey's test. Contact angle to one-way ANOVA and Games-Howell's test (5%). At 24h, MEP showed higher bond strength, and FA+SRX the lower. FA+MDP and FA+SCF+MDP showed similar values and FA+MEP was intermediate. After thermocycling, FA+SCF+MDP, FA+MEP, and MEP showed higher values, and FA+SRX the lower while FA+MDP was intermediate. When the periods were compared, FA+MDP, FA+SCF+MDP, FA+MEP, and MEP showed higher values for 24h while FA+SRX was similar. SEM showed retentive surface and crystal exposure when treated with FA+SCF+MDP. The less retentive surface was obtained with MEP, and the other treatments promoted intermediate irregularities. In conclusion, surface treatment and thermocycling promoted different values of adhesive strength and contact angle in a zirconia-reinforced lithium silicate ceramic. Failures were predominantly adhesive, and the ceramic surface was characterized by different levels of roughness and selective exposure of crystals.

Resumo O objetivo neste estudo foi verificar o efeito de tratamentos de superfície da cerâmica de dissilicato de lítio reforçada com zircônia fixada ao cimento resinoso. Os blocos cerâmicos foram separados de acordo com os tratamentos (n=10): AF+SRX (ácido fluorídrico + silano), AF+MDP (ácido fluorídrico + MDP), AF+SCF+MDP (ácido fluorídrico + silano + MDP), AF+MEP (Ácido fluorídrico + MEP) e MEP (Primer auto condicionante). Cilindros de cimento resinoso foram confeccionados em cada bloco cerâmico, foto ativados com 1.200 mW/cm² por 40 segundos, armazenados em água a 37°C por 24 horas e avaliados pelo teste de resistência ao micro cisalhamento, falha por análise descritiva em microscopia óptica (%), caracterização da superfície por imagens MEV e ângulo de contato (Goniômetro). Outras amostras foram submetidas a 10.000 ciclos térmicos (5° e 55°C). Os dados de resistência de união foram submetidos a ANOVA dois fatores e teste de Tukey (5%). Ângulo de contato com ANOVA um fator e teste de Games-Howell (5%). Em 24 horas, MEP apresentou maior resistência de união e AF+S a menor. AF+MDP e AF+SCF+MDP apresentaram valores similares e AF+MEP foi intermediário. Após a ciclagem térmica, AF+SCF+MDP, AF+MEP e MEP apresentaram valores maiores e AF+SRX o menor enquanto AF+MDP foi intermediário. Quando comparados os períodos, AF+MDP, AF+SCF+MDP, AF+MEP e MEP apresentaram valores maiores em 24 horas enquanto AF+SRX foi similar. MEV mostrou superfície mais retentiva e exposição de cristais quando tratada com AF+SCF+MDP. A superfície menos retentiva foi obtida com MEP, e os demais tratamentos promoveram irregularidades de superfície intermediárias. Conclui-se que o tratamento superficial e a termociclagem promoveram diferentes valores de resistência adesiva e ângulo de contato em cerâmica de silicato de lítio reforçada com zircônia. As falhas foram predominantemente adesivas, e a superfície cerâmica foi caracterizada com diferentes níveis de rugosidade e exposição seletiva de cristais.

Relationship between the number of glaucoma medications, ocular surface disorder, and treatment adherence / Relação entre o número de medicamentos para glaucoma, distúrbio da superfície ocular e adesão ao tratamento

ABSTRACT Purpose: To determine the relationship of ocular surface disease, the number of glaucoma medications prescribed and its influence on treatment adherence. Methods: In this cross-sectional study, demographic data of patients with glaucoma were collected, and patients completed the ocular surface disease index questionnaire and the glaucoma treatment compliance assessment tool. Ocular surface parameters were assessed by "Keratograph 5M." Patients were stratified into two groups according to the amount of prescribed ocular hypotensive eye drops (Group 1, one or two classes of medications; Group 2, three or four classes) Results: In total, 27 eyes of 27 patients with glaucoma were included: 17 using 1 or 2 topical medications (Group 1) and 10 eyes using 3 or 4 classes (Group 2). For the Keratograph assessment, patients using ≥3 medications had significantly smaller tear meniscus height (0.27 ± 0.10 vs. 0.43 ± 0.22; p=0.037). The analysis of Ocular Surface Disease Index questionnaire showed higher scores among the groups using more hypotensive eye drops (18.67 ± 13.53 vs. 38.82 ± 19.72; p=0.004). Regarding the glaucoma treatment compliance assessment tool, Group 2 had worse scores in components of forgetfulness (p=0.027) and barriers due to lack of drops (p=0.031). Conclusion: Patients with glaucoma using more hypotensive eye drops had worse tear meniscus height and ocular surface disease index scores than those using fewer topical medications. Patients using three or four drug classes had worse predictors of glaucoma adherence. Despite worse ocular surface disease results, no significant difference in self-reported side effects was found.

RESUMO Objetivo: Determinar a relação entre doença da superfície ocular (OSD), número de medicamentos prescritos para o glaucoma, e como isso influencia na adesão ao tratamento. Métodos: Neste estudo transversal, pacientes com glaucoma foram submetidos à coleta de dados demográficos, preenchimento do questionário Ocular Surface Disease Index e do Glaucoma Treatment Compliance Assessment Tool. Os parâmetros da superfície ocular foram avaliados pelo "Keratograph 5M". Indivíduos foram estratificados em 2 grupos de acordo com a quantidade de colírios hipotensores oculares prescritos (Grupo 1: uma ou duas classes de medicamentos; Grupo 2: três ou quatro classes). Resultados: No total, 27 olhos de 27 pacientes com glaucoma foram incluídos: 17 usando 1 ou 2 medicamentos tópicos (Grupo 1) e 10 olhos usando 3 ou 4 classes (Grupo 2). Na avaliação do Keratograph, os pacientes em uso de 3 ou mais medicamentos apresentaram altura do menisco lacrimal significativamente menor (0,27 ± 0,10 vs. 0,43 ± 0,22; p=0,037). Análise do questionário OSDI mostrou escores mais altos entre o grupo que usou mais colírios hipotensores (18,67 ± 13,53 vs. 38,82 ± 19,72; p=0,004). Em relação ao Glaucoma Treatment Compliance Assessment Tool, o Grupo 2 apresentou piores escores nos componentes de esquecimento (p=0,027) e barreiras por falta de colírios (p=0,031). Conclusão: O estudo demonstrou que pacientes com glaucoma usando mais colírios hipotensivos apresentaram piores escores de altura do menisco lacrimal e Ocular Surface Disease Index, em comparação com aqueles que usaram menos medicamentos tópicos. Pacientes em uso de 3 ou 4 classes de colírios tiveram piores preditores de adesão ao glaucoma. Apesar dos piores resultados de doença da superfície ocular, não houve diferença significativa nos efeitos colaterais relatados.

Effects of the preoperative use of artificial tears combined with recombinant bovine basic fibroblast growth factor on cataract patients complicated with dry eyes / Efeitos do uso pré-operatório de lágrimas artificiais combinadas com fator de crescimento de fibroblastos básicos bovinos recombinantes em pacientes com catarata complicada com olhos secos

ABSTRACT Purpose: To assess the effects of the preoperative application of artificial tears combined with recombinant bovine basic fibroblast growth factor on the ocular surface function and inflammatory factor levels after operation in cataract patients complicated with dry eyes. Methods: A total of 118 cataract patients (118 eyes) complicated with dry eyes treated from February 2019 to February2020 were assigned to control and observation groups (n=59 eyes/group) using a random number table. One week before the operation, the control group was administered 0.1% sodium hyaluronate eye drops (artificial tears), based on which the observation group received Beifushu eye drops (recombinant bovine basic fibroblast growth factor), both 6 times daily for 1 week. A comparison was made between the scores of clinical symptoms and the indices of ocular surface function, inflammatory factors in tears, and oxidative stress indices before and after the operation. The ocular surface function was evaluated by an ocular surface disease index questionnaire, tear film breakup-time assay, Schirmer's I test, and corneal fluorescein stain test. The inflammatory factors in tears were measured. Results: No significant differences were noted in the general data and clinical symptom score, ocular surface disease index, tear film breakup-time, Schirmer's I test score, fluorescein stain score, interleukin-6, tumor necrosis factor-alpha, malondialdehyde, superoxide dismutase, lipid peroxide, and total antioxidant capacity before treatment between the 2 groups (p>0.05). After treatment, the clinical symptom score, ocular surface disease index, fluorescein stain score, tumor necrosis factor-alpha, interleukin-6, malondial-dehyde and lipid peroxide declined significantly, and tear film breakup-time, Schirmer's I test score, superoxide dismutase, and total antioxidant capacity increased in both the groups. The improvements in the clinical symptom score as well as in the indices of ocular surface function, inflammatory factors, and oxidative stress were more prominent in the observation group than in the control group (p<0.05). Conclusions: Artificial tears combined with recombinant bovine basic fibroblast growth factor before operation. significantly improved the ocular surface function, reduced inflammatory factors in tears, and alleviated dry eye symptoms after operation in cataract patients.

RESUMO Objetivo: Avaliar os efeitos da aplicação pré-operatória de lágrimas artificiais combinadas com o fator de crescimento de fibroblastos básicos bovinos recombinantes na função da superfície ocular e níveis de fator inflamatório após cirurgia em pacientes com catarata complicada com olhos secos. Métodos: Um total de 118 pacientes com catarata complicada com olhos secos (118 olhos), tratados entre fevereiro de 2019 e fevereiro de 2020, foram divididos em grupos de controle e de observação (n=59, 59 olhos) usando uma tabela de números aleatórios. Uma semana antes da cirurgia, o grupo controle recebeu colírio de hialuronato de sódio a 0,1% (lágrimas artificiais), enquanto o grupo de observação recebeu colírio Beifushu (fator de crescimento de fibroblastos básicos bovinos recombinantes), ambos, seis vezes ao dia, por uma semana. Antes do tratamento e um mês após a cirurgia, os escores de sintomas clínicos, índices de função da superfície ocular, níveis de fatores inflamatórios nas lágrimas e índices de estresse oxidativo foram comparados. A função da superfície ocular foi avaliada pelo questionário do índice de doença da superfície ocular, ensaio de tempo de ruptura do filme lacrimal, teste I de Schirmer e teste de coloração por fluoresceína da córnea. Os níveis de fatores inflamatórios nas lágrimas foram medidos. Resultados: Não houve diferenças significativas nos dados gerais e no escore de sintomas clínicos, índice de doença da superfície ocular, tempo de ruptura do filme lacrimal, escore do teste I de Schirmer, pontuação do teste de coloração por fluoresceína da córnea, interleucina-6, fator de necrose tumoral alfa, malondialdeído, superóxido dismutase, peróxido lipídico e capacidade antioxidante total antes do tratamento entre os dois grupos (p>0,05). Após o tratamento, o escore de sintomas clínicos, índice de doença da superfície ocular, escore do teste de coloração por fluoresceína da córnea, fator de necrose tumoral alfa, interleucina-6, malondialdeído e peróxido lipídico diminuíram significativamente, e o tempo de ruptura do filme lacrimal, escore do teste I de Schirmer, superóxido dismutase e a capacidade antioxidante total aumentou em ambos os grupos. As melhorias no escore de sintomas clínicos, bem como os índices de função da superfície ocular, fatores inflamatórios e estresse oxidativo foram mais proeminentes no grupo de observação do que no grupo controle (p<0,05). Conclusões: Lágrimas artificiais combinadas com fator de crescimento de fibroblastos básicos recombinantes antes da cirurgia melhoram notavelmente a função da superfície ocular, diminuem os níveis de fatores inflamatórios nas lágrimas e aliviam os sintomas de olho seco após a cirurgia em pacientes com catarata complicada com olhos secos.

Effect of Water and Chlorhexidine with Different Pressures of Oral Irrigation Device on the Surface Roughness and Topography of Giomer

Abstract Objective: To evaluate the effect of different pressures of an oral irrigation device (OID) and the irrigation solution type on the surface roughness of the giomer restorative material. Material and Methods: In this in vitro study, disk-shaped giomer samples were fabricated and assigned to 5 groups (n=23): Group 1, storage in distilled water (control); Group 2, OID #7 pressure/ water; Group 3, OID #10 pressure/ water; Group 4, OID #7 pressure/ 0.05% CHX; Group 5, OID #10 pressure/ 0.05% CHX. The samples' treatment simulated a one-year application of OID. Surface roughness (Ra) and topography of the giomer were evaluated using profilometry and scanning electron microscopy. The data were analyzed with Paired t-test, Tukey, and ANOVA tests (α=0.05). Results: The Ra of the samples increased significantly after treatment with OID (p<0.001). The roughness increase in groups with a pressure of 10 was higher than those with a pressure of 7 (p<0.001). The effect of pressure on surface changes was significant (p<0.001). However, the solution type and the cumulative effect of these two factors were insignificant (p=0.08 and p=0.43, respectively). Conclusion: Oral irrigation device with both solutions significantly increased the surface roughness and topographic changes of the giomer. The severity of these changes was related to the device's pressure.

Surface roughness of resin-based composites subjected to professional prophylaxis / Rugosidade de superfície de resinas compostas após profilaxia profissional

Objetivo: Avaliar o efeito de dois métodos de profilaxia sobre a rugosidade superficial de diferentes resinas compostas. Materiais e Métodos: Dez amostras (7 mm x 2 mm) foram confeccionadas para cada resina testada: MH - resina microhíbrida (viscosidade regular - Opallis); NH ­ resina nanohíbrida (viscosidade regular - Vittra APS); BF ­ resina bulk fill (alta viscosidade - Opus Bulk Fill); MHF ­ resina fluida microhíbrida (Opallis flow); e OS ­ resina nanohíbrida camaleão (viscosidade regular - Vittra Unique). Os valores iniciais de rugosidade (Rai) foram obtidos para cada amostra e então subdivididas em dois grupos (n = 5) seguindo o método de profilaxia: SB ­ jato de bicarbonato de sódio (125µm, 30 s, 10 mm de distância, 2 bar); e PP ­ profilaxia com pasta de pedra-pomes e escova rotatória (30 s, 3000 rpm e pressão de 150 g). Após, uma nova medida de Ra (Raf) foi obtida, e a diferença calculada (ΔRa). Os dados foram analisados pelo teste ANOVA três fatores e teste de Bonferroni, e a diferença de rugosidade (ΔRa) pelo teste Anova dois fatores e teste de Tukey (p<0,05). Resultados: MHF apresentou maior rugosidade após profilaxia com jato de bicarbonato, enquanto para NH a abrasão com pedra pomes foi mais deletéria. Para os demais grupos não houve diferença. Discussão: A alteração na rugosidade promovida pela profilaxia é material-dependente. Conclusão: A profilaxia profissional com jato de bicarbonato ou abrasão com pedra-pomes induziu alterações na rugosidade das resinas.

Aim: This study evaluated the effect of two prophylaxis methods over the surface roughness of different resin composites. Materials and Methods: Ten disc-shaped specimens (7 mm x 2 mm) were made for each composite tested: MH - microhybrid composite with regular viscosity (Opallis); NH ­ nanohybrid composite with regular viscosity (Vittra APS); BF ­ high-viscosity bulk fill composite (Opus Bulk Fill); MHF - microhybrid flowable composite (Opallis flow); and OS ­ nanohybrid one-shade composite with regular viscosity (Vittra Unique). Initial roughness (Ra) values were obtained from each sample, and then they were divided into two groups (n = 5) following the prophylaxis method: SB ­ prophylaxis with sodium bicarbonate powder (125µm grain) using an air-powder polishing device (30 s application distanced 10 mm with 2 bar); and PP ­ prophylaxis with pumice paste and rotatory brush (30 s, 3000 rpm and pressure of 150 g). After that, a new Ra measurement (Raf) was obtained, and the difference was calculated (ΔRa). Data were compared using Three-way ANOVA followed by Bonferroni teste and the Ra difference (ΔRa) was analyzed by Two-way ANOVA followed by the Tukey test (p<0.05). Results: MHF presented higher Ra values after receiving prophylaxis with SB, while for NH, the abrasion with pumice increased the Ra, and for the other groups, no differences were found. Discussion: Alteration promoted by prophylaxis is material dependent. Conclusion: Professional prophylaxis with a bicarbonate jet or abrasion with pumice-based paste can induce changes in the composites' roughness.