ABSTRACT
ABSTRACT Introduction: Surgically assisted rapid palatal expansion (SARPE) has been the treatment of choice in subjects presenting skeletally mature sutures. Objective: The purpose of this study was to analyze stress distribution and displacement of the craniofacial and dentoalveolar structures resulting from three types of palatal expanders with surgical assistance using a non-linear finite element analysis. Material and Methods: Three different palatal expanders were designed: Model-I (tooth-bone-borne type containing four miniscrews), Model-II (tooth-bone-borne type containing two miniscrews), and Model-III (bone-borne type containing four miniscrews). A Le Fort I osteotomy was performed, and a total of 5.0 mm palatal expansion was simulated. Nonlinear analysis (three theory) method (geometric nonlinear theory, nonlinear contact theory, and nonlinear material methods) was used to evaluate stress and displacement of several craniofacial and dentoalveolar structures. Results: Regardless of the maxillary expander device type, surgically assisted rapid palatal expansion produces greater anterior maxillary expansion than posterior (ANS ranged from 2.675 mm to 3.444 mm, and PNS ranged from 0.522 mm to 1.721 mm); Model-I showed more parallel midpalatal suture opening pattern - PNS/ANS equal to 54%. In regards to ANS, Model-II (1.159 mm) and Model-III (1.000 mm) presented larger downward displacement than Model-I (0.343 mm). PNS displaced anteriorly more than ANS for all devices; Model-III presented the largest amount of forward displacement for PNS (1.147 mm) and ANS (1.064 mm). All three type of expanders showed similar dental displacement, and minimal craniofacial sutures separation. As expected, different maxillary expander designs produce different primary areas and levels of stresses (the bone-borne expander presented minimal stress at the teeth and the tooth-bone-borne expander with two miniscrews presented the highest). Conclusions: Based on this finite element method/finite element analysis, the results showed that different maxillary expander designs produce different primary areas and levels of stresses, minimal displacement of the craniofacial sutures, and different skeletal V-shape expansion.
RESUMO Introdução: A expansão rápida da maxila assistida cirurgicamente (ERMAC) tem sido o tratamento de escolha em indivíduos que apresentam suturas esqueleticamente maduras. Objetivo: O objetivo deste estudo foi avaliar, utilizando uma análise não linear com elementos finitos, a distribuição de tensões e os deslocamentos das estruturas craniofaciais e dentoalveolares gerados por três tipos de expansores palatinos usados na ERMAC. Material e Métodos: Três tipos de expansores palatinos foram projetados: Modelo I (dento-osseossuportado com quatro mini-implantes), Modelo II (dento-osseossuportado com dois mini-implantes) e Modelo III (osseossuportado com quatro mini-implantes). Uma osteotomia Le Fort I foi realizada e foi simulada uma expansão palatina total de 5,0 mm. Um método de análise não linear (três teorias - teoria da não-linearidade geométrica, teoria do contato não linear e métodos para materiais não lineares) foi utilizado para avaliar a tensão e o deslocamento de diversas estruturas craniofaciais e dentoalveolares. Resultados: Independentemente do tipo de aparelho expansor palatino, a ERMAC produziu maior expansão anterior da maxila do que posterior (ENA variou de 2,675 mm a 3,444 mm e ENP variou de 0,522 mm a 1,721 mm); o Modelo I apresentou padrão de abertura mais paralela da sutura palatina mediana, com ENP/ENA igual a 54%. Com relação à ENA, o Modelo II (1,159 mm) e o Modelo III (1,000 mm) apresentaram maior deslocamento para baixo do que o Modelo I (0,343 mm). A ENP deslocou-se mais para anterior do que a ENA com todos os aparelhos; o Modelo III apresentou o maior deslocamento para anterior da ENP (1,147 mm) e da ENA (1,064 mm). Os três tipos de expansores apresentaram deslocamento dentário semelhante e separação mínima das suturas craniofaciais. Como esperado, diferentes designs de expansores palatinos produzem diferentes áreas primárias e níveis de tensões (o expansor osseossuportado apresentou tensão mínima nos dentes, e o expansor dento-osseossuportado com dois mini-implantes apresentou o maior). Conclusões: Com base nesse estudo de elementos finitos, os resultados mostraram que diferentes designs de expansores palatinos produzem diferentes áreas primárias e níveis de tensão, com deslocamento mínimo das suturas craniofaciais e diferentes expansões esqueléticas em forma de V.
ABSTRACT
ABSTRACT Introduction: Surgically Assisted Rapid Palatal Expansion (SARPE) promote maxillary expansion in skeletally mature patients. This technique is effective; however, some side effects are still unknown. Objectives: evaluate the presence of alveolar defects (dehiscences and fenestrations) in patients submitted to the SARPE. The null hypothesis tested was: SARPE does not influence the number of dehiscences and fenestrationss. Methods: A retrospective quasi-experiment study of a convenience sample of 279 maxillary teeth, in 29 patients evaluated with Cone Beam Computed Tomography (CBCT) at T1 (before SARPE), T2 (after expansion) and T3 (after retention), was performed. The examined teeth were: canines, first and second premolars, first and second molars. in axial, coronal, and cross-sectional views. The evaluations involved viewing slices from mesial to distal of the buccal roots. Results: All statistical analyses were performed using SAS 9.3 and SUDAAN softwares. Alpha used in the study was 0.05. Alveolar defects increased statistically from T1 (69.0%) to T2 (96.5%) and T3 (100%). Dehiscences increased 195% (Relative Risk 2.95) at the end of expansion (T2). After retention (T3), individuals were on average 4.34 times more likely to develop dehiscences (334% increase). Fenestrations did not increase from T1 to T2 (p = 0.0162, 7.9%) and decreased from T2 to T3 (p = 0.0259, 4.3%). Presence of fenestrations at T1 was a significant predictor for the development of dehiscences in T2 and T3. Dehiscences increased significantly in all teeth, except second molars. Conclusion: The null hypothesis was rejected. After SARPE the number of dehiscences increased and fenestrations decreased. Previous alveolar defects were predictor for dehiscences after SARPE.
RESUMO Introdução: A expansão rápida da maxila assistida cirurgicamente (ERMAC) promove expansão em pacientes esqueleticamente maduros. Essa técnica é efetiva; entretanto, alguns efeitos colaterais ainda são desconhecidos. Objetivos: Avaliar a presença de defeitos alveolares (deiscência e fenestração) em pacientes submetidos à ERMAC. A hipótese nula testada foi que a ERMAC não influenciaria o número de deiscências e fenestrações. Métodos: Foi realizado um estudo quase-experimental de uma amostra de conveniência de 279 dentes superiores, de 29 pacientes que foram avaliados por meio de tomografia computadorizada de feixe cônico (TCFC) em T1 (antes da ERMAC), T2 (após expansão) e T3 (após contenção). Caninos, primeiros e segundos pré-molares, primeiros e segundos molares foram examinados em cortes axiais, coronais e sagitais. As raízes vestibulares desses dentes foram avaliadas da face mesial até a distal. Resultados: Todas as análises estatísticas foram realizadas usando os softwares SAS 9.3 e SUDAAN. O alfa usado no estudo foi de 0,05. Os defeitos alveolares aumentaram significativamente de T1 (69,0%) para T2 (96,5%) e T3 (100%). Deiscências aumentaram 195% (risco relativo de 2,95%) no final da expansão (T2). Após contenção (T3), os pacientes tiveram, em média, 4,34 vezes mais chance de desenvolver deiscência (334% de aumento). As fenestrações não aumentaram de T1 para T2 (p= 0.0162, 7.9%) e diminuíram de T2 para T3 (p = 0.0259, 4,3%). A presença de fenestrações em T1 foi um preditor significativo para o desenvolvimento de deiscências em T2 e T3. Deiscências aumentaram significativamente em todos os dentes, exceto nos segundos molares. Conclusão: A hipótese nula foi rejeitada. Após a ERMAC, o número de deiscências aumentou e o de fenestrações diminuiu. Defeitos alveolares prévios foram preditores de deiscências após a ERMAC.
ABSTRACT
Endotracheal tube damage is a well-known complication of maxillary surgery. We report a case of failure to ventilate due to superficial damage to the tubing between the cuff and pilot balloon in the nasal portion of a north facing Ring, Adair and Elwyn pre-formed endotracheal tube during Surgically Assisted Rapid Palatal Expansion surgery. The endotracheal tube was replaced uneventfully and surgery completed successfully. On reflection, we feel that that the vulnerable position of the cuff-pilot tubing significantly contributed to this critical incident and suggest that increased recognition of this is vital for the prevention of such cases in the future.
Subject(s)
Palatal Expansion Technique , Intubation, Intratracheal , MaxillaABSTRACT
@#Transverse maxillary deficiency is a common malocclusion in the clinic. Palatal expansion techniques are commonly used in the treatment of maxillary transverse deficiency. Traditional palatal expansion techniques have good effects on the treatment of children and adolescents whose palatal suture has not yet closed, but the effects on adult patients are unsatisfied. New palatal expansion techniques, such as miniscrew-assisted rapid palatal expansion and surgical-assisted maxillary expansion, have increased the age-related indications for palatal expansion, and their bone expansion effect has been strengthened. With the development of CAD/CAM technology and 3D printing technology, techniques such as Invisalign and personalized appliances have been developed and have promising application prospects. To provide references for the clinical treatment of maxillary transverse deficiency, palatal expansion techniques are reviewed from the following aspects: mechanism and indications, expansion pattern, traditional and new palatal expansion appliances, stability and retention of palatal expansion, outlook of future expanders, etc.
ABSTRACT
BACKGROUND: Maxillary skeletal expander is a non-surgical expansion technique of the maxilla. It is different from the traditional maxillary rapid expander, micro-implant assisted rapid palatal expansion, and surgically assisted rapid palatal expansion. It provides new ideas and methods for the correction of maxillary transverse deficiency, and especially for adult patients with the growth finished, provides an efficient and minimally invasive bone expansion. OBJECTIVE: To review the application and advantage of the maxillary skeletal expander in the treatment of maxillary transverse deficiency, providing scientific reference for the clinical therapeutic schedule in such patients. METHODS: A computer search for Cochrane Library, PubMed, Embase, Web of Science, CNKI, WanFang Database, and CBM databases was performed for Chinese and English literature related to the maxillary expansion device published before May 31st, 2019. RESULTS AND CONCLUSION: The maxillary skeletal expander is an effective method for correcting the maxillary transverse deficiency, and the expansion of the arch is not limited by age. This device also has a good outcome in bone expansion for adults. The maxillary skeletal expander expands the entire mid-face structure, causing the mid-sacral suture to be parallel, followed by ruptured palatine suture, increased width between the zygomatic bones, as well as the entire nasal cavity involving the upper nasal bone area is widened. This device also causes less adverse reactions, for example, the teeth are inclined buccally and the height of the alveolar bone is reduced.
ABSTRACT
In today’s orthodontic practice esthetics is a primary concern both for patient and the orthodontist. The perception of esthetics for a lay person largely depends on the symmetry of the face. Hence, diagnosis and correction of the transverse discrepancy are imperative for optimum result. Some occlusal relations can result from skeletal jaw relation or from tooth positions. Malocclusion can occur in three planes of space, i.e., sagittal, transverse, and vertical plane. Transverse discrepancy is “An abnormality of development in transverse plane.” In orthodontic diagnosis and treatment planning, the emphasis is placed on recognizing asymmetry and achieving symmetric results with dental midlines coincident with each other and with the facial midline. Humans, like most other animals, are considered to display bilateral symmetry. By strict definition, this implies that mirror-image mathematical identity exists between right and left halves. In orthodontic diagnosis and treatment planning, emphasis is placed on recognizing asymmetry and achieving symmetric results. Treatment of an asymmetry can be challenging. The 1st treatment step is to diagnose if the asymmetry is of functional, dental or skeletal cause. The treatment options for transverse problem may include arch coordination, asymmetric extraction, asymmetric mechanics, and skeletal correction by orthopedic or surgical procedure. However, it is crucial to determine that the observed asymmetry is genuine and not the product of a functional or habitual shift of the mandible as is often the case with unilateral cross-bites due to reduced width of the maxillary arch.
ABSTRACT
Rapid palatal expansion(RPE) with the tooth-born appliance is not sufficient to apply to the patients with periodontal problem or insufficient tooth anchorage, and it leads to tipping of the anchorage teeth and increasing teeth mobility and root resorption. To avoid these disadvantages, we present the case using palatal screws and custommade palatal expander. A 23-year-old patient underwent surgically assisted rapid maxillary expansion with the Hyrax expansion using 4 tent screws. The study models were used to measure the pre-/-post surgical width of the anterior and posterior dental arches with a digital sliding caliper. In the result, the custom-made palatal expander with 4 tent screws is suitable for delivering a force to the mid-palatal suture expansion. And it is low cost, small sized and simply applied. The results indicated that maxillary expansion with the custom-made palatal anchorage device is predictable and stable technique without significant complications in patients.
Subject(s)
Humans , Young Adult , Dental Arch , Hyraxes , Palatal Expansion Technique , Root Resorption , Sutures , ToothABSTRACT
A expansão da maxila cirurgicamente assistida (EMCA) é um procedimento cirúrgico indicado para a correção da atresia maxilar em pacientes que já atingiram a maturação óssea. Os efeitos da EMCA são observados não só nos arcos dentários, maxilas e mandíbula, mas também na cavidade nasal, já que o septo nasal encontra-se localizado no centro do assoalho nasal, apoiado sobre a sutura palatina mediana. O objetivo deste estudo foi identificar a posição do septo nasal antes e após a separação cirúrgica das maxilas e avaliar sua influência na movimentação da maxila do lado que foi deslocado. Foram avaliadas 56 tomografias computadorizadas de feixe cônico (TCFC) adquiridas no tomográfo i-CAT Classic®, com voxel de 0,3mm, de 14 indivíduos submetidos à EMCA nos períodos préoperatório e pós-operatório de 15, 60 e 180 dias. Inicialmente, as imagens pósoperatórias foram visualizadas nas reformatações multiplanares, para identificar a qual maxila, direita ou esquerda, o septo nasal permaneceu ligado após a EMCA. Numa segunda etapa, foram realizadas medidas lineares nas imagens correspondentes aos períodos pré e pósoperatórios. Essas medidas foram realizadas na reformatação axial imediatamente acima do aparelho expansor, de forma padronizada para cada paciente, e consistiram da distância entre uma linha de referência central, que passava na espinha nasal anterior e no centro do forame incisivo, dividindo o paciente em lado direito e esquerdo, até os caninos e molares direitos e esquerdos. O índice kappa intraexaminador foi > 0,9. Para comparar as diferenças entre as médias dos dois grupos (lado ligado ao septo nasal e não ligado ao septo nasal) foi utilizado o teste t. Em 78,6% dos pacientes o septo nasal permaneceu ligado à maxila esquerda e em 21,4%, ligado à maxila direita. Em relação às medidas lineares, tanto na região de caninos como na região de molares, observouse que, no período pré-operatório, não havia diferença entre os lados direito e esquerdo...
The Surgically assisted rapid palatal expansion (SARPE) is a surgical procedure indicated for the correction of maxillary constriction in adult patients. The effects of EMCA are observed not only in dental, maxillary, and mandibular arches, but also in the nasal cavity, since the septum is located in the center of the nasal floor and rests on the median palatine suture. The purpose of this study the position of the nasal septum before and after surgical separation of the maxillary, was to identify and evaluate their influence on the movement of the jaw which remained attached. Fifty six cone beam computed tomography (CBCT) scanner acquired i-CAT Classic, with 0.3 mm voxel. Fourteen individuals submitted to SARPE in the preoperative and postoperative periods of 15, 60, and 180 days which were evaluated. Initially, postoperative images were visualized using multiplanar reformatting to identify which jaw, right or left, the nasal septum remained bound after the SARPE. In a second step, linear measurements in the images corresponding to the pre- and postoperative periods were performed. These measurements were performed in the axial immediately above the expander reformatting, standardized form for each patient, and consisted of the distance from a central reference line, passing the anterior nasal spine and the center of the incisive foramen, dividing the patient's right side and left to the canines and molars on the right and left. The intraobserver kappa index was > 0.9. To compare the differences between the means of two groups (side connected to the nasal septum and not connected to the nasal septum) a t test was used. In 78.6% of patients, the nasal septum remained attached to the left maxilla and 21.4% on right jaw. Regarding linear measurements, both in the region of canines as in the molar region, it was observed that, in the preoperative period, there was no difference between the right and left sides. After the SARPE, a statistically...
Subject(s)
Humans , Male , Female , Young Adult , Adult , Maxilla/anatomy & histology , Palatal Expansion Technique , Nasal Septum/anatomy & histology , Cone-Beam Computed Tomography/methods , Cuspid/anatomy & histology , Molar/anatomy & histology , Reference ValuesABSTRACT
A expansão da maxila cirurgicamente assistida (EMCA) é um procedimento cirúrgico indicado para a correção da atresia maxilar em pacientes que já atingiram a maturação óssea. Os efeitos da EMCA são observados não só nos arcos dentários, maxilas e mandíbula, mas também na cavidade nasal, já que o septo nasal encontra-se localizado no centro do assoalho nasal, apoiado sobre a sutura palatina mediana. O objetivo deste estudo foi identificar a posição do septo nasal antes e após a separação cirúrgica das maxilas e avaliar sua influência na movimentação da maxila do lado que foi deslocado. Foram avaliadas 56 tomografias computadorizadas de feixe cônico (TCFC) adquiridas no tomográfo i-CAT Classic®, com voxel de 0,3mm, de 14 indivíduos submetidos à EMCA nos períodos préoperatório e pós-operatório de 15, 60 e 180 dias. Inicialmente, as imagens pósoperatórias foram visualizadas nas reformatações multiplanares, para identificar a qual maxila, direita ou esquerda, o septo nasal permaneceu ligado após a EMCA. Numa segunda etapa, foram realizadas medidas lineares nas imagens correspondentes aos períodos pré e pósoperatórios. Essas medidas foram realizadas na reformatação axial imediatamente acima do aparelho expansor, de forma padronizada para cada paciente, e consistiram da distância entre uma linha de referência central, que passava na espinha nasal anterior e no centro do forame incisivo, dividindo o paciente em lado direito e esquerdo, até os caninos e molares direitos e esquerdos. O índice kappa intraexaminador foi > 0,9. Para comparar as diferenças entre as médias dos dois grupos (lado ligado ao septo nasal e não ligado ao septo nasal) foi utilizado o teste t. Em 78,6% dos pacientes o septo nasal permaneceu ligado à maxila esquerda e em 21,4%, ligado à maxila direita. Em relação às medidas lineares, tanto na região de caninos como na região de molares, observouse que, no período pré-operatório, não havia diferença entre os lados direito e esquerdo...
The Surgically assisted rapid palatal expansion (SARPE) is a surgical procedure indicated for the correction of maxillary constriction in adult patients. The effects of EMCA are observed not only in dental, maxillary, and mandibular arches, but also in the nasal cavity, since the septum is located in the center of the nasal floor and rests on the median palatine suture. The purpose of this study the position of the nasal septum before and after surgical separation of the maxillary, was to identify and evaluate their influence on the movement of the jaw which remained attached. Fifty six cone beam computed tomography (CBCT) scanner acquired i-CAT Classic, with 0.3 mm voxel. Fourteen individuals submitted to SARPE in the preoperative and postoperative periods of 15, 60, and 180 days which were evaluated. Initially, postoperative images were visualized using multiplanar reformatting to identify which jaw, right or left, the nasal septum remained bound after the SARPE. In a second step, linear measurements in the images corresponding to the pre- and postoperative periods were performed. These measurements were performed in the axial immediately above the expander reformatting, standardized form for each patient, and consisted of the distance from a central reference line, passing the anterior nasal spine and the center of the incisive foramen, dividing the patient's right side and left to the canines and molars on the right and left. The intraobserver kappa index was > 0.9. To compare the differences between the means of two groups (side connected to the nasal septum and not connected to the nasal septum) a t test was used. In 78.6% of patients, the nasal septum remained attached to the left maxilla and 21.4% on right jaw. Regarding linear measurements, both in the region of canines as in the molar region, it was observed that, in the preoperative period, there was no difference between the right and left sides. After the SARPE, a statistically...
Subject(s)
Humans , Male , Female , Young Adult , Maxilla/anatomy & histology , Palatal Expansion Technique , Nasal Septum/anatomy & histology , Cone-Beam Computed Tomography/methods , Cuspid/anatomy & histology , Molar/anatomy & histology , Reference ValuesABSTRACT
Uni- or bilateral mandibular hypoplasia can be associated with various syndromes or is acquired after early traumatic or inflammatory disease in the temporomandibular joint(TMJ). Early treatment is necessary to avoid consequent impairment of midfacial growth. The standard treatment of these malformations consists of the application of bone grafts which can lead to unpredictable growth, but the new procedure of bone lengthening which was presented by McCarthy et al. represents a limited surgical intervention and therefore open up a new perspective of treatment, especially in younger children with severe deformities. Patients with hemifacial microsomia and facial asymmetry have a vertically short maxilla, a tilted occlusal plane, and a short mandible. A 14-years-old boy with facial asymmetry, who was fractured on both condyle and mandibular symphysis before 8 years ago, was treated by mandibular ramus lengthening, symphysial widening and surgically assisted rapid palatal expansion with corticotomy. After allowing 1 week for the healing of the periosteum, the distraction was performed at the rate of 0.5-1.0mm per day for 7 days on maxilla and 14 days on mandible. The device was maintained on maxilla and mandible for 12 weeks following distraction. The difference in ramus and mandibular transverse deficiency were corrected and facial asymmetry was improved with complex distraction osteogenesis.