Research progress of anti-gout small molecules targeting the NLRP3 inflammasome / 药学学报

Currently, clinically used drugs for the treatment of gout inflammation, such as colchicine, nonsteroidal anti-inflammatory drugs, and glucocorticoids, can only relieve the pain of joint inflammation and have severe hepatorenal toxicity and multiple organ adverse reactions. The NOD-like receptor thermal protein domain associated protein 3 (NLRP3) inflammasome is a key complex that induces the onset of gout inflammation and has become a crucial target in the development of anti-gout drugs. This article reviews the research progress of anti-gout small molecules targeting the NLRP3 inflammasome and their bioactivity evaluation methods in the past five years, in order to provide information for the development of specific drugs for the treatment of gout inflammation.

Panax notoginseng saponin relieving the inflammatory pain caused by complete Freund’s adjuvant by inhibiting the activation of astrocytes in mice / 解剖学报

Objective To analyse the analgesic effect and possible mechanism of panax notoginseng saponin (PNS) on mouse models of chronic inflammatory pain caused by complete Freund’s adjuvant (CFA). Methods A total of 48 male C57BL/ 6J mice were divided randomly into four groups: normal saline control group (Ctrl), CFA group (CFA), CFA + PNS group (CFA+PNS), CFA + dexamethasone (DEX) group (CFA+DEX). Von Frey filaments were used to detect mechanical pain in mice. Immunohistochemistry was used to detect the number and morphological changes of glial fibrillary acidic protein (GFAP) positive astrocytes. Western blotting was used to detect the expressions of GFAP, nucleotide-binding and oligomerization domain(NOD)-like receptor thermal protein domain associated protein 3 (NLRP3), apoptosis-associated speck-like protein containing a CARD (ASC), Caspase-1, interleukin (IL)-1β, and IL-18 in mice’s spinal cord segments in each group. Results Compared with the Ctrl group, mice in the CFA group showed a significant decrease in mechanical pain thresholds at day 1, day 3, day 5, day 7, and day 14. Additionally, there was a significant decrease in NLRP3, ASC, Caspase-1, IL-1β and IL-18 in the spinal cord of the mice. PNS intervention could relieve mechanical pain and down-regulate the expressions of NLRP3, ASC, Caspase-1, IL-1β and IL-18 in the spinal cord of mice, with no significant difference compared with the CFA+DEX group. CFA group mice had significantly more GFAP positive cells in their posterior horns than Ctrl group mice, as measured by immunohistochemistry; PNS intervention decreased the number of GFAP positive cells in the posterior horn of the spinal cord in model mice;DEX had no effect on the number of GFAP positive cells in the dorsal horn of spinal cord. According to Western blotting results, GFAP expression in the spinal cord of the CFA group was significantly more than that of the Ctrl group; PNS intervention significantly reduced GFAP expression in the spinal cord of CFA group mice;DEX had no effect on the expression of GFAP in the posterior horn of spinal cord. Conclusion PNS has a good alleviating effect on inflammatory pain, and its mechanism may be related to inhibition of astrocyte activation and NLRP3 inflammasome activation.

Quality Assessment Of Alternative Patent Fingerprint Method Using Alcohol Gel And Thermal Paper / Jurnal Sains Kesihatan Malaysia

@#Fingerprints are unique structures made up of a combination of friction ridges. Due to the individual characteristics of fingerprints, it is used commonly used for identification. Traditionally, patent fingerprints are obtained using an ink pad. Unfortunately, the print takes time to dry on paper and sometimes the fingerprint will leave streaks on a finger and nearby surfaces. Alcohol gel and thermal paper could address this problem as the alcohol component in gel is a weak acid that can reacts with the leuco dyes present on thermal paper. Hence forth, this study intends to find an alternative method of obtaining patent fingerprints using various combinations of alcohol gels and thermal papers. Six donors were requested to deposit their fingerprints on different types of thermal paper using different brands of alcohol gel hand sanitisers. Quality scores based on CAST’s grading scheme were used to determine the fingerprint quality using various combinations of thermal paper and hand sanitisers. The result showed that patent fingerprints developed using hand sanitiser and thermal paper were of lower quality than the standard (ink pad). Combination of alcohol-based hand sanitiser, which consists of 70% alcohol concentration and ATM receipt paper was found to be able to produce the best quality fingerprint among the studied combinations. Despite this result, it still indicates that fingerprints using an ink pad is still the best method to record a fingerprint.

Scutellariae Radix-Coptidis Rhizoma Treats Atherosclerosis via NLRP3 Inflammasome-mediated Pyroptosis of Macrophages / 中国实验方剂学杂志

ObjectiveTo investigate the therapeutic effect of Scutellariae Radix-Coptidis Rhizoma （SRCR） on atherosclerosis （AS） in mice and the effect of SRCR on macrophage pyroptosis in plaques via NOD-like receptor thermal protein domain-associated protein 3 （NLRP3） inflammasomes. MethodApoE-/- mice were fed with a high-fat diet for the modeling of AS and randomized into model， atorvastatin （5 mg·kg-1）， and low-， medium-， and high-dose （1.95， 3.9， 7.8 g·kg-1， respectively） SRCR groups. Normal C57BL/6J mice were selected as the control group. After 8 weeks of administration， hematoxylin-eosin staining was used to observe the pathological status of the aortic plaque. The lipid accumulation in aortic plaque was observed by oil red O staining. The serum levels of total cholesterol （TC）， triglyceride （TG）， high-density lipoprotein cholesterol （HDL-C）， and low-density lipoprotein cholesterol （LDL-C） in mice were measured. Immunofluorescence double staining was employed to detect the co-localized expression of EGF-like module-containing mucin-like hormone receptor-like 1 （EMR1）/NLRP3 and EMR1/gasdermin D （GSDMD）. The serum levels of interleukin-1β （IL-1β） and interleukin-18 （IL-18） were determined by enzyme-linked immunosorbent assay （ELISA）. The protein levels of NLRP3， apoptosis-associated speck-like protein （ASC）， Caspase-1， cleaved Caspase-1， GSDMD， N-terminus of GSDMD （GSDMD-NT）， pro-IL-1β， IL-1β， and IL-18 were determined by Western blot， and the mRNA levels of NLRP3， ASC， Caspase-1， GSDMD， IL-1β， and IL-18 were determined by Real-time fluorescence quantitative polymerase chain reaction （Real-time PCR）. ResultCompared with the control group， the model group showed obvious plaques， elevated serum levels of TG， TC， LDL-C， IL-1β， and IL-18 （P<0.01）， lowered serum level of HDL-C （P<0.01）， and up-regulated expression of NLRP3 inflammasomes and molecules related to pyroptosis in the aortic plaques （P<0.01）. Compared with the model group， SRCR， especially at the medium and high doses， alleviated the plaque pathology， reduced the lipid content in plaques （P<0.05， P<0.01）， recovered the serum lipid levels （P<0.05）， reduced the macrophage recruitment （P<0.01）， activation of NLRP3 inflammasomes， and pyroptosis in aortic root plaques （P<0.05）， lowered the serum IL-1β and IL-18 levels （P<0.01）， and down-regulated the protein levels of NLRP3， ASC， Caspase-1， cleaved Caspase-1， GSDMD， GSDMD-NT， pro-IL-1β， IL-1β， and IL-18 （P<0.05） and the mRNA levels of NLRP3， ASC， Caspase-1， GSDMD， IL-1β， and IL-18 in the aortic tissue （P<0.05）. ConclusionSRCR exerts a therapeutic effect on high-fat diet-induced AS in mice by inhibiting the activation NLRP3 inflammasomes and reducing the pyroptosis of macrophages in plaques.

Research advances in thermal ablation for lung cancer / 中国胸心血管外科临床杂志

@#Although surgical resection remains to be the best treatment strategy for stageⅠnon-small cell lung cancer (NSCLC), percutaneous thermal ablation offers an important option for patients who are unable to undergo surgical resection. Currently, there are three main thermal ablation methods used in the treatment of lung cancer, including radiofrequency ablation (RFA), microwave ablation (MWA) and argon-helium cryoablation (AHC). With the improvement of technique and the accumulation of experience in the treatment of lung cancer, some limitations are disclosed in the initial application of RFA, such as heat sink effect, skin burns and rapid carbonization. These shortcomings have been overcome in the development of MWA and AHC. The feasibility and safety of thermal ablation for the treatment of lung cancer has been demonstrated and its efficacy has been significantly improved (especially for the tumour diameter≤3 cm). This article will focus on the application and recent research developments of these ablation techniques in the treatment of lung cancer.

Determination of 27 volatile organic compounds in exhaled breath by thermal desorption-gas chromatography-mass spectrometry / 环境与职业医学

Background Volatile organic compounds (VOCs) in exhaled breath are closely associated with respiratory diseases and are linked to various metabolic reactions in the human body. A quantitative analytical method can provide technical support for studying VOCs related to various diseases. Objective To establish a thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) method for the determination of 27 VOCs in exhaled breath. Methods VOCs in exhaled breath were collected using a Bio-VOC sampler and enriched with Tenax TA thermal desorption tubes before TD-GC-MS analysis. Standards were collected using thermal desorption tubes and optimized for thermal desorption conditions as well as chromatographic and mass spectrometric conditions: The separation of the 27 VOCs was achieved by an optimized temperature program, the improvement of sensitivity by optimizing quantitative ions, and the increase of VOCs desorption efficiency by optimizing thermal desorption time and temperature. Limit of detection, limit of quantification, accuracy, precision, and stability of the proposed method were investigated by spiking with a blank gas bag, and exhaled breath samples from 20 healthy individuals were collected for an application study of the proposed method. Results The thermal desorption temperature was 280 ℃, and desorption time was 6 min. A VF-624ms chromatographic column was selected for the separation of target substances. The initial temperature of heating program was 35 ℃, maintained for 1 min, and then increased to 100 ℃ at a heating rate of 3 ℃·min−1 for 1 min, followed by increasing to 210 ℃ at a heating rate of 28 ℃·min−1 for 5 min. A quantitative analysis was conducted with a single ion monitoring (SIM) mode. Under these conditions, the 27 VOCs showed good linear relationships in their respective concentration ranges and the correlation coefficients were higher than 0.9990. The limits of detection of the method were in the range of 0.01-0.13 nmol·mol−1, the limits of quantification were in the range of 0.02-0.44 nmol·mol−1, and the spiked recoveries were in the range of 80.1%-120.5%, with intra-batch and inter-batch precision ≤ 18.8% and 17.9% respectively. All substances can be stored at room temperature (23-28 °C) for 7 d and at 4 °C for 14 d. The proposed method was applied to exhaled breath samples from 20 subjects with detection rates≥ 80% (except for trans-2-pentene and decane) and a concentration range of 0.00-465.50 nmol·mol−1. Conclusion The established TD-GC-MS method for quantification of VOCs in exhaled breath is characterized by high sensitivity and good accuracy, and is suitable for quantitative determination of VOCs in exhaled breath, which can provide technical support for the study of exhaled breath VOCs.

The evolution and application progress of non-modified drug target discovery CETSA technology / 药学学报

Understanding the research methods for drug protein targets is crucial for the development of new drugs, clinical applications of drugs, drug mechanisms, and the pathogenesis of diseases. Cellular thermal shift assay (CETSA), a target research method without modification, has been widely used since its development. Now, there are various CETSA-based technology combinations, such as mass spectrometry-based cellular thermal shift assay (MS-CETSA), isothermal dose response-cellular thermal shift assay (ITDR-CETSA), amplified luminescent proximity homogeneous assay-cellular thermal shift assay (Alpha-CETSA), etc., which combine their respective advantages and further expand the application scope of CETSA. These technologies are suitable for the entire drug development chain, from drug screening to monitoring the target binding and off-target toxicity of drugs in patients. Based on the author's research experience, this paper reviews the principles of CETSA and related binding technologies, their application in target discovery, and the progress of data processing and analysis in recent years, aiming to provide reference and reference for the further application of CETSA.

Effect of Ceramic Thickness on the Bond Strength to Resin-Luting Agents before and after Thermal Cycling

Abstract This study investigated microshear bond strength (µSBS) of two (2) dual-cured resin-luting agents (RelyX™ Ultimate and RelyX™ U200) when photoactivated through varying thicknesses of lithium disilicate, with or without thermal cycling. Discs of IPS e.max Press of 0.5, 1.5, and 2 mm in thickness were obtained. Elastomer molds (3.0 mm in thickness) with four cylinder-shaped orifices 1.0 mm in diameter, were placed onto the ceramic surfaces and filled with resin-luting agents. A Mylar strip, glass plate, and load of 250 grams were placed over the filled mold. The load was removed and the resin-luting agents were photoactivated through the ceramics using a single-peak LED (Radii Plus.) All samples were stored in distilled water at 37oC for 24 h. Half of the samples were subjected to thermal cycling (3,000 cycles; 5ºC and 55ºC). All samples were then submitted to µSBS test using a universal testing machine (Instron 4411) at a crosshead speed of 0.5 mm/min. Data were submitted to three-way ANOVA and Tukey post-hoc test (α=0.05). The mean µSBS at 24 h was significantly higher than after thermal cycling (p<0.05). No statistical difference was found between resin-luting agents (p > 0.05). The mean µSBS for groups photoactivated through 0.5 mm ceramic were significantly higher than 1.5 mm and 2.0 mm (p < 0.05). In conclusion, increased ceramic thicknesses reduced the bond strength of tested resin-luting agents to lithium disilicate. No differences were found between resin-luting agents. Thermal cycling reduced the bond strength of both resin-luting agents.

Resumo: Este estudo investigou a resistência de união ao microcisalhamento (RUµC) de dois (2) agentes de cimentação de resina dual (RelyX™ Ultimate e RelyX™ U200) quando fotoativados através de diferentes espessuras de dissilicato de lítio, com ou sem ciclagem térmica. Discos do IPS e.max Press de 0,5, 1,5 e 2 mm de espessura foram obtidos. Moldes de elastômero (3,0 mm de espessura) com quatro orifícios cilíndricos de 1,0 mm de diâmetro foram colocados sobre as superfícies cerâmicas e preenchidos com agentes de cimentação de resina. Uma tira Mylar, placa de vidro e carga de 250 gramas foram colocadas sobre o molde preenchido. A carga foi removida e os agentes de cimentação resinosos foram fotoativados através da cerâmica usando um LED de pico-único (Radii Plus). Todas as amostras foram armazenadas em água deionizada a 37oC por 24 h. Metade das amostras foi submetida a ciclagem térmica (3.000 ciclos; 5ºC e 55ºC). Todas as amostras foram então submetidas ao teste de RUµC usando uma máquina de teste universal (Instron 4411) com velocidade de 0,5 mm/min. Os dados foram submetidos à Análise de Variância três fatores e ao teste post-hoc de Tukey (α = 0,05). A média de RUµC em 24 h foi significativamente maior do que após a ciclagem térmica (p < 0,05). Não houve diferença estatística entre os cimentos resinosos (p > 0,05). As médias de RUµC para grupos fotoativados através de cerâmica de 0,5 mm foram significativamente maiores do que 1,5 mm e 2,0 mm (p < 0,05). Em conclusão, o aumento da espessura da cerâmica reduziu a resistência de união dos agentes de cimentação resinosos ao dissilicato de lítio. Não foram encontradas diferenças entre os agentes de cimentação resinosos. A ciclagem térmica reduziu a resistência de união de ambos os agentes de cimentação resinosos.

Supercritical transesterification of vegetable oil and ethanol: temperature and residence time effects on phase formation and water content

Supercritical transesterification has emerged as a readily available alternative for biodiesel production since no catalyst is required, thereby generating fewer waste products. In this research, the supercritical transesterification of refined vegetable oil and aqueous ethanol was carried out at temperatures 400 to 480 °C and a 12:1 ethanol to oil molar ratio, to assess the effect of temperature and residence time in the formation of a homogeneous phase, effluent appearance and increased water content derived from glycerol etherification. The results showed that water was produced at temperatures higher than 400 °C, as expected from the occurrence of glycerol etherification, and that prolonged times resulted in gas and soot formation, indicating esters decomposition. Through water mass balances, it was possible to identify the set of operation conditions in which the water formed from glycerol etherification matched with the maximum expected according to the proposed reaction scheme.

La transesterificación supercrítica se ha propuesto como una alternativa para la producción de biodiesel ya que no requiere catalizador de esta manera se generan menos residuos. En esta investigación, la transesterificación supercrítica de aceite vegetal refinado y etanol acuoso se llevó a cabo a temperaturas en el rango 400 a 480 °C y relación molar etanol a aceite de 12:1, para evaluar el efecto de la temperatura y el tiempo de residencia en la formación de una fase homogénea, apariencia del efluente e incremento del contenido de agua resultado de las reacciones de eterificación del glicerol. Los resultados mostraron que se produjo agua a temperaturas mayores a 400°C, atribuida a la eterificación del glicerol, y que tiempos de residencia prolongados resultaron en formación de gas y hollín, indicativo de reacciones de descomposición de esteres. A través de balances de masa, fue posible identificar el conjunto de condiciones de operación a las cuales el agua formada por la eterificación del glicerol coincide con el valor máximo esperado de acuerdo con el esquema de reacción propuesto.

A transesterificação supercrítica foi proposta como uma alternativa para a produção de biodiesel porque não requer catalisador e, dessa forma, gera menos resíduos. Nesta pesquisa, a transesterificação supercrítica de aceite vegetal refinado e etanol acuoso foi conduzida a temperaturas entre 400 e 480 °C e uma relação molar de etanol e aceite de 12: 1, para avaliar o efeito da temperatura e do tempo de residência na formação de uma fase homogênea, apariência do efluente e aumento do conteúdo de água resultante das reações de eterificação do glicerol. Os resultados mostraram que se produziu água a temperaturas maiores que 400°C, atribuída à eterificação do glicerol, e que os tempos de residência prolongados resultaram na formação de gás e hollín, indicativo de reações de decomposição de ésteres. Por meio de balanças de massa, foi possível identificar o conjunto de condições de operação em que a água formada pela eterificação do glicerol coincide com o valor máximo esperado de acordo com o esquema de reação proposto.

Sequelae of carbide-related thermo-chemical injury: A retrospective analysis

Purpose: To describe the outcomes of eyes with calcium carbide (CaC2)?related thermo?chemical injury. Methods: This study included 28 eyes of 23 patients who presented with calcium carbide?related ocular burns. Only patients with more than three months of follow?up were included. Group A included 16 eyes with Dua抯 Grade I朓II burns, while Group B included 12 eyes with Grade IV朧I burns. Electronic medical records were reviewed to provide data on the etiology of burn, presenting clinical signs and visual acuity, sequelae, and surgical interventions performed, both in the acute and chronic phases. Results: The overall mean age was 28.48 � 11.8 years. Fifteen patients were injured while using carbide to create an explosion to scare away animals on farms. The median presenting BCVA (best?corrected visual acuity) in Group A (20/160) was significantly better than in Group B [(20/2000) (P = 0.002)]. Five eyes in Group A and one eye in Group B underwent medical management. There was no difference in the duration of follow?up for both groups (P = 0.24). The median final BCVA in Group A (20/32) was significantly better than in Group B [(20/200) (P = 0.02)]. Two eyes in Group A and nine eyes in Group B developed LSCD. Two eyes in Group B were phthisical at the last visit. Conclusion: Calcium carbide?related ocular injuries can result in significant visual morbidity in young adults. Early presentation and management may improve outcomes. Prevention of these injuries by increasing awareness and increasing advocacy efforts is necessary.

Demographic profile and clinical characteristics of patients presenting with acute ocular burns

Purpose: To study and compare the demographic and clinical profile of acute ocular burns (AOB) in children and adults. Methods: This retrospective case series included 271 children (338 eyes) and 1300 adults (1809 eyes) who presented to two tertiary eye care centers within one month of sustaining AOB. Data regarding demographics, causative agents, severity of injury, visual acuity (VA), and treatment were collected and analyzed. Results: Males were more commonly affected particularly among adults (81% versus 64%, P < 0.00001). Among children, 79% sustained domestic injuries, whereas 59% of adults had work?place injuries (P < 0.0001). Most cases were due to alkali (38%) and acids (22%). Edible lime (chuna, 32%), superglue (14%), and firecrackers (12%) in children, and chuna (7%), insecticides, lye, superglue (6% each), toilet cleaner (4%) and battery acid (3%) in adults, were the main causative agents. The percentage of cases with Dua grade IV?VI was greater in children (16% versus 9%; P = 0.0001). Amniotic membrane grafting and/or tarsorrhaphy were needed in 36% and 14% of affected eyes in children and adults, respectively (P < 0.00001). The median presenting VA was logMAR 0.5 in children and logMAR 0.3 in adults (P = 0.0001), which improved significantly with treatment in both groups (P < 0.0001), but the final VA in eyes with Dua grade IV?VI burns was poorer in children (logMAR 1.3 versus logMAR 0.8, P = 0.04). Conclusion: The findings clearly delineate the at?risk groups, causative agents, clinical severity, and treatment outcomes of AOB. Increased awareness and data?driven targeted preventive strategies are needed to reduce the avoidable ocular morbidity in AOB

Young infant nurturing practices among mothers of rural areas in Agra district, Uttar Pradesh: A community-based cross-sectional study

Introduction: Healthy initiation of life is essential in establishing the foundations of a healthy nation. Traditional care practices at home and in the community inevitably affect maternal and young infant health. The objective is to study young infant nurturing practices and factors influencing these practices in rural Agra. Material and Methods: This is a community-based cross-sectional study that was conducted in rural Agra, using a multi-stage random sampling method. A total of 240 mothers were interviewed using a structured questionnaire. Results: The study results showed that 65.0% of the mothers were following either satisfactory (58.3%) or good (6.7%) nurturing practices. Of the three components of nurturing, the majority (61.6%) of mothers had satisfactory (46.6%) or good (15%) breastfeeding practices, most (86.6%) were giving satisfactory (56.6%) or good (30%) thermal care and only 53.33% were following satisfactory (42.2%) or good (10.8%) hygiene practice. The practice regarding newborn care was found to have a significant association with the place of birth, type of delivery and educational status of the mothers and fathers. Conclusion: This study outcome shows the need for a better awareness and educational outreach program coupled with an effective health-care delivery system to improve young infant nurturing practices in achieving better health.

Assessing clinical and molecular outcomes of prophylactic thermal pulsation therapy on ocular surface health following refractive surgery

Purpose: To study ocular surface signs, symptoms, and tear film composition following prophylactic thermal pulsation therapy (TPT) prior to refractive surgery, and to compare these outcomes with those who underwent TPT after refractive surgery. Methods: Patients with mild?to?moderate evaporative dry eye disease (DED) and/or meibomian gland dysfunction (MGD) undergoing refractive surgery were included. Group 1 patients received TPT (LipiFlow) prior to laser?assisted in situ keratomileusis (LASIK; n = 32, 64 eyes), and Group 2 patients received TPT three months after LASIK (n = 27, 52 eyes). Ocular Surface Disease Index (OSDI) score, Schirmer’s test (ST1, ST2), Tear Breakup Time (TBUT), meibography, and tear fluid were obtained preoperatively and at three months postoperatively in Groups 1 and 2. Additional postoperative evaluation was performed three months after TPT in Group 2. Tear soluble factor profile was measured by multiplex enzyme?linked immunosorbent assay (ELISA) using flow cytometry. Results: Postoperative OSDI score was significantly lower and TBUT was significantly higher when compared with matched preoperative values of Group 1 participants. On the other hand, the postoperative OSDI score was significantly higher and TBUT significantly lower when compared with matched preoperative values of Group 2 participants. TPT significantly reduced the postoperative elevation in OSDI and significantly reduced the postoperative reduction in TBUT in Group 2 participants. Tear Matrix metalloproteinase?9/ Tissue inhibitor matrix metalloproteinase 1 (MMP?9/TIMP1) ratio was significantly higher, postoperatively, when compared with matched preoperative levels in Group 2. However, MMP9/TIMP1 ratio remained unaltered in Group 1 participants. Conclusion: TPT prior to refractive surgery improved postsurgical ocular surface signs and symptoms and reduced tear inflammatory factors, thereby suggesting the plausibility of reduced post?refractive surgery DED in patients.

Influence of temperature on the torsional properties of two thermally treated NiTi rotary instruments

Abstract This study aimed to evaluate the influence of temperature on torsional strength and angular deflection of two experimental NiTi rotary instruments manufactured from Blue and Gold thermal treatments and with identical cross-sections. A total of 40 experimental NiTi instruments 25.06 and with a triangular cross-section and manufactured from Blue and Gold thermal treatments were used (n=20). The torsional test was performed in the 3 mm from the tip of the instrument according to ISO 3630-1. The torsional test evaluated the torsional strength and angular deflection to failure at room temperature (21°C ± 1° C) and body temperature (36°C ±1°C). The fractured surface of each fragment was observed by using scanning electron microscopy (SEM). Data were analyzed using an unpaired t test for inter and intra-group comparison and the level of significance was set at 5%. The results showed that the body temperature did not affect the torsional strength and angular deflection of the instruments when compared with room temperature (P>0.05). However, at body temperature, the Blue NiTi instruments presented significantly lower angular deflection in comparison with Gold NiTi instruments (P<0.05). There was no significant difference regarding the torsional strength of the instruments at body temperature (P>0.05). The temperature did not affect the torsional strength of the instruments manufactured from Blue and Gold technology. However, the Blue NiTi instruments presented significantly lower angular deflection than Gold instruments at 36°C temperature.

Resumo O objetivo deste estudo foi avaliar a influência da temperatura nas propriedades de torção (resistência à torção e deflexão angular) de dois instrumentos rotatórios experimentais de NiTi fabricados com secção triangu.ar e tratamentos térmicos Blue e Gold. Quarenta instrumentos experimentais de NiTi 25.06 com tratamento térmico Blue e Gold foram usados (n= 20). Foi avaliada a resistência torcional e a deflexão angular até a fratura na temperatura ambiente (21°C ± 1°C) e corporal (36°C ± 1°C). O teste torcional foi realizado nos 3 mm da ponta dos instrumentos de acordo com a ISO 3630-1. A superfície fraturada de cada instrumento foi observada pelo microscópio eletrônico de varredura (MEV). Os dados foram analisados por meio do teste t não pareado para a comparação inter e intragrupos e o nível de significância à 5%. Os resultados demonstraram que a temperatura corporal não afetou a resistência a torção e deflexão angular quando comparada com a temperatura ambiente (P>0.05). No entanto, na temperatura de 36°C o instrumento com tratamento térmico Blue apresentou menor deflexão angular quando comparado com o Gold (P<0.05). Não houve diferença significante entre os dois instrumentos em relação a resistência à torção. A temperatura corporal não modificou a resistência torcional dos instrumentos fabricados com tecnologia Blue e Gold. No entanto, os instrumentos com NiTi Blue apresentaram menor deflexão angular do que o Gold a 36°C.

Thermo-resistant enzyme-producing microorganisms isolated from composting / Microrganismos produtores de enzimas termo-resistentes isolados de compostagem

Organo-mineral fertilizers supplemented with biological additives are an alternative to chemical fertilizers. In this study, thermoresistant microorganisms from composting mass were isolated by two-step procedures. First, samples taken at different time points and temperatures (33 days at 52 ºC, 60 days at 63 ºC, and over 365 days at 26 ºC) were pre-incubated at 80 oC for 30 minutes. Second, the microbial selection by in vitro culture-based methods and heat shock at 60 oC and 100 oC for 2h and 4h. Forty-one isolates were able to grow at 60 °C for 4h; twenty-seven at 100 °C for 2h, and two at 100 °C for 4h. The molecular identification by partial sequencing of the 16S ribosomal gene using universal primers revealed that thirty-five isolates were from eight Bacillus species, one Brevibacillus borstelensis, three Streptomyces thermogriseus, and two fungi (Thermomyces lanuginosus and T. dupontii). Data from amylase, phytase, and cellulase activity assays and the enzymatic index (EI) showed that 38 of 41 thermo-resistant isolates produce at least one enzyme. For amylase activity, the highest EI value was observed in Bacillus licheniformis (isolate 21C2, EI= 4.11), followed by Brevibacillus borstelensis (isolate 6C2, EI= 3.66), Bacillus cereus (isolate 18C2, EI= 3.52), and Bacillus paralicheniformis (isolate 20C2, EI= 3.34). For phytase, the highest EI values were observed for Bacillus cereus (isolate 18C2, EI= 2.30) and Bacillus licheniformis (isolate 3C1, EI= 2.15). Concerning cellulose production, B. altitudinis (isolate 6C1) was the most efficient (EI= 6.40), followed by three Bacillus subtilis (isolates 9C1, 16C2, and 19C2) with EI values of 5.66, 5.84, and 5.88, respectively, and one B. pumilus (isolate 27C2, EI= 5.78). The selected microorganisms are potentially useful as a biological additive in organo-mineral fertilizers and other biotechnological processes.

Os fertilizantes organo-minerais suplementados com aditivos biológicos são uma alternativa aos adubos químicos. Neste estudo, microrganismos termoresistentes foram isolados de compostagem por procedimentos de duas etapas. Inicialmente, as amostras tomadas em diferentes períodos e temperaturas (33 dias a 52 ºC, 60 dias a 63 ºC e mais de 365 dias a 26 ºC) foram pré-incubadas a 80 oC por 30 minutos. Posteriormente, a seleção microbiana foi conduzida por métodos baseados em cultura in vitro e choque térmico a 60 oC e 100 oC por 2h e 4h. Quarenta e um isolados foram capazes de crescer a 60 °C por 4h; vinte e sete a 100 °C por 2h e dois a 100 °C por 4h. A identificação molecular por sequenciamento parcial do gene ribossomal 16S usando primers universais revelou que trinta e cinco isolados eram de oito espécies de Bacillus, um Brevibacillus borstelensis, três Streptomyces thermogriseus e dois fungos (Thermomyces lanuginosus e T. dupontii). Os dados dos ensaios de atividade de amilase, fitase e celulase e o índice enzimático (IE) mostraram que 38 dos 41 isolados termorresistentes produziram pelo menos uma enzima. Para a atividade da amilase, o maior valor de IE foi observado em Bacillus licheniformis (isolado 21C2, IE = 4,11), seguido por Brevibacillus borstelensis (isolado 6C2, IE = 3,66), Bacillus cereus (isolado 18C2, IE = 3,52) e Bacillus paralicheniformis (isolado 20C2, IE = 3,34). Para a fitase, os maiores valores de IE foram observados para B. cereus (isolado 18C2, IE = 2,30) e B. licheniformis (isolado 3C1, IE = 2,15). Em relação à produção de celulose, B. altitudinis (isolado 6C1) foi o mais eficiente (IE = 6,40), seguido por três Bacillus subtilis (isolados 9C1, 16C2 e 19C2) com valores de IE de 5,66, 5,84 e 5,88, respectivamente, e um B. pumilus (isolado 27C2, IE = 5,78). Pode-se inferir que os microrganismos selecionados são potencialmente úteis como aditivos biológicos em fertilizantes organo-minerais e outros processos biotecnológicos.

Thermo-resistant enzyme-producing microorganisms isolated from composting

Abstract Organo-mineral fertilizers supplemented with biological additives are an alternative to chemical fertilizers. In this study, thermoresistant microorganisms from composting mass were isolated by two-step procedures. First, samples taken at different time points and temperatures (33 days at 52 ºC, 60 days at 63 ºC, and over 365 days at 26 ºC) were pre-incubated at 80 oC for 30 minutes. Second, the microbial selection by in vitro culture-based methods and heat shock at 60 oC and 100 oC for 2h and 4h. Forty-one isolates were able to grow at 60 °C for 4h; twenty-seven at 100 °C for 2h, and two at 100 °C for 4h. The molecular identification by partial sequencing of the 16S ribosomal gene using universal primers revealed that thirty-five isolates were from eight Bacillus species, one Brevibacillus borstelensis, three Streptomyces thermogriseus, and two fungi (Thermomyces lanuginosus and T. dupontii). Data from amylase, phytase, and cellulase activity assays and the enzymatic index (EI) showed that 38 of 41 thermo-resistant isolates produce at least one enzyme. For amylase activity, the highest EI value was observed in Bacillus licheniformis (isolate 21C2, EI= 4.11), followed by Brevibacillus borstelensis (isolate 6C2, EI= 3.66), Bacillus cereus (isolate 18C2, EI= 3.52), and Bacillus paralicheniformis (isolate 20C2, EI= 3.34). For phytase, the highest EI values were observed for Bacillus cereus (isolate 18C2, EI= 2.30) and Bacillus licheniformis (isolate 3C1, EI= 2.15). Concerning cellulose production, B. altitudinis (isolate 6C1) was the most efficient (EI= 6.40), followed by three Bacillus subtilis (isolates 9C1, 16C2, and 19C2) with EI values of 5.66, 5.84, and 5.88, respectively, and one B. pumilus (isolate 27C2, EI= 5.78). The selected microorganisms are potentially useful as a biological additive in organo-mineral fertilizers and other biotechnological processes.

Resumo Os fertilizantes organo-minerais suplementados com aditivos biológicos são uma alternativa aos adubos químicos. Neste estudo, microrganismos termoresistentes foram isolados de compostagem por procedimentos de duas etapas. Inicialmente, as amostras tomadas em diferentes períodos e temperaturas (33 dias a 52 ºC, 60 dias a 63 ºC e mais de 365 dias a 26 ºC) foram pré-incubadas a 80 oC por 30 minutos. Posteriormente, a seleção microbiana foi conduzida por métodos baseados em cultura in vitro e choque térmico a 60 oC e 100 oC por 2h e 4h. Quarenta e um isolados foram capazes de crescer a 60 °C por 4h; vinte e sete a 100 °C por 2h e dois a 100 °C por 4h. A identificação molecular por sequenciamento parcial do gene ribossomal 16S usando primers universais revelou que trinta e cinco isolados eram de oito espécies de Bacillus, um Brevibacillus borstelensis, três Streptomyces thermogriseus e dois fungos (Thermomyces lanuginosus e T. dupontii). Os dados dos ensaios de atividade de amilase, fitase e celulase e o índice enzimático (IE) mostraram que 38 dos 41 isolados termorresistentes produziram pelo menos uma enzima. Para a atividade da amilase, o maior valor de IE foi observado em Bacillus licheniformis (isolado 21C2, IE = 4,11), seguido por Brevibacillus borstelensis (isolado 6C2, IE = 3,66), Bacillus cereus (isolado 18C2, IE = 3,52) e Bacillus paralicheniformis (isolado 20C2, IE = 3,34). Para a fitase, os maiores valores de IE foram observados para B. cereus (isolado 18C2, IE = 2,30) e B. licheniformis (isolado 3C1, IE = 2,15). Em relação à produção de celulose, B. altitudinis (isolado 6C1) foi o mais eficiente (IE = 6,40), seguido por três Bacillus subtilis (isolados 9C1, 16C2 e 19C2) com valores de IE de 5,66, 5,84 e 5,88, respectivamente, e um B. pumilus (isolado 27C2, IE = 5,78). Pode-se inferir que os microrganismos selecionados são potencialmente úteis como aditivos biológicos em fertilizantes organo-minerais e outros processos biotecnológicos.

Quality of moxa with different leaf-to-moxa ratios based on correlation analysis of thermogravimetric properties, cellulose content, and microscopic characteristics of non-secretory trichomes / 中国中药杂志

The quality of moxa is a key factor affecting the efficacy of moxibustion. Traditional moxa grades are evaluated by the leaf-to-moxa ratio, but there is a lack of support from scientific data. Scanning electron microscopy(SEM), Image Pro Plus, Van Soest method, and stimultaneous thermal analysis(TGA/DSC) were used to characterize the scientific implication of the combustion differences between moxa with different leaf-to-moxa ratios(processed by crusher). The results showed that the median lengths from non-secretory trichomes(NSTs) of natural NSTs and moxa with leaf-to-moxa ratios of 3∶1, 5∶1, 10∶1, and 15∶1 were 542.46, 303.24, 291.18, 220.69, and 170.61 μm, respectively. The cellulose content of moxa increased significantly(P<0.05) with the increase in leaf-to-moxa ratio and the combustion parameters(T_i, t_i, D_i, C,-R_p,-R_v, S, D_b, and J_(total)) all showed an increasing trend. The correlation results showed that the burning properties of moxa(T_i,-R_v, t_i, and J_2) were significantly and positively correlated with cellulose content. NSTs with a length of 1-200 μm were significantly and positively correlated with J_2. NSTs with a length of 200-600 μm were significantly and positively correlated with J_1, T_(peak2), T_(peak1), and-R_v, and negatively correlated with J_(total), T_b, and t_b. As the leaf-to-moxa ratio increases, the NSTs in the moxa become shorter and the cellulose content increases, which is more conducive to ignition performance, heat release, and a milder, longer-lasting burn. The "NSTs-cellulose-TGA/DSC" quantitative evaluation method scientifically reveals the scientific connotation of the combustion of moxa with different leaf-to-moxa ratios and provides a scientific basis for the establishment of quality evaluation methods for moxa with different leaf-to-moxa ratios.

Key points for the thermal comfort of water buffaloes in Eastern Amazon / Pontos-chave do conforto térmico de bubalinos na Amazônia Oriental

This study presented relevant aspects about the Amazonian environment and how it impacts the thermal comfort of domestic buffaloes (Bubalus bubalis) raised in the Eastern Amazon. Furthermore, strategies for monitoring and mitigating animal heat stress are presented, based on research results with the species. Although domestic buffaloes are considered adaptable animals, exposure to intense solar radiation causes thermal discomfort. This condition is expressed in biophysical indicators, in metabolic, endocrine, behavioral responses, and in body thermographic patterns. Therefore, the biometeorological monitoring of production is crucial to support decision-making regarding environmental management strategies, genetic selection of thermotolerant individuals, and increase in animal welfare. Lastly, the use of silvopastoral systems can help to provide higher thermal comfort, which is a condition that directly impacts the productivity of milk and meat buffaloes when they are raised in tropical regions, such as in the Eastern Amazon.

Objetivou-se apresentar aspectos relevantes sobre o ambiente amazônico e como este impacta no conforto térmico de búfalos domésticos (Bubalus bubalis) criados na Amazônia Oriental. Adicionalmente, são apresentadas estratégias para monitoramento e mitigação do estresse térmico animal, a partir de resultados de pesquisa com a espécie. Apesar dos búfalos domésticos serem considerados animais adaptáveis, a exposição à intensa radiação solar provoca desconforto térmico. Essa condição é expressa em indicadores biofísicos, nas respostas metabólicas, endócrinas, comportamentais e nos padrões termográficos corporais. Assim, o monitoramento biometeorológico da produção é crucial para subsidiar tomadas de decisão em relação a estratégias de manejo ambiental, seleção genética de indivíduos termotolerantes e incremento do bem-estar animal. Por fim, o uso de sistemas silvipastoris pode auxiliar na oferta de maior conforto térmico, que é uma condição que impacta diretamente na produtividade de bubalinos de leite e carne, quando estes são criados em regiões tropicais, como na Amazônia Oriental.

Study on release and antioxidant activity of quercetin after loaded by hot alkali hydrolysis modified UiO-66 material / 药学学报

UiO-66 (University of Oslo 66) is a kind of promising material that can improve the release and bioavailability of poorly water-soluble bioactive compounds of traditional Chinese medicine. However, the loading of quercetin in raw UiO-66 was not ideal. In this study, UiO-66-BH (UiO-66-blend-heating) was obtained by heating UiO-66 and KOH solution following blended them. UiO-66-BH maintained the outline of octahedral structure of UiO-66 but with obvious rough and uneven pores on the surface. UiO-66-BH had good adsorption of quercetin with saturation adsorption was 138.92 mg·g-1, the adsorption process belonged to single molecular layer adsorption and was controlled by chemisorption. UiO-66-BH can control the release of quercetin in simulated gastrointestinal fluid, and the drug concentration was significantly higher than that of free quercetin after long-term release (36% vs 9%). Compared with quercetin, the ABTS (2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) ammonium salt) radical scavenging activity of UiO-66-BH@quercetin drug delivery system decreased, while the DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity remained almost unchanged. The drug delivery system showed a strong antioxidant effect similar to quercetin. The findings indicated that UiO-66-BH could control release of quercetin and was expected to be used as a drug carrier material for some insoluble active components of traditional Chinese medicine such as quercetin.

Current Situation and Research Progress of Minimally Invasive Treatment on Central Nervous System Tumors / 肿瘤防治研究

Central nervous system (CNS) tumors pose a substantial risk to human health. Conventional therapeutic modalities, including surgical excision, radiotherapy, and chemotherapy, exhibit inherent limitations and adverse effects. Nonetheless, the emergence of minimally invasive surgical techniques and advanced imaging technology have spurred research interest in the realm of neurology toward developing minimally invasive treatments for neurosurgical tumors. These approaches encompass tumor laser interstitial thermal therapy, tumor treating fields, photodynamic therapy, and other related interventions. Minimally invasive treatments offer notable advantages, such as reduced tissue trauma, expedited recovery, and pronounced therapeutic efficacy, rendering them extensively employed in clinical settings. This comprehensive review aims to elucidate accomplishments in the field of minimally invasive CNS tumor treatments while delineating prospective avenues for future development.