ABSTRACT
@#Objective To investigate the clinical effect of 3D computed tomography bronchial bronchography and angiography (3D-CTBA) and guidance of thoracoscopic anatomic pulmonary segmentectomy by Mimics software system. Methods A retrospective analysis was performed on patients who underwent thoracoscopic segmentectomy in the Department of Thoracic Surgery of Affiliated People's Hospital of Jiangsu University from June 2020 to December 2022. The patients who underwent preoperative 3D-CTBA using Materiaise's interactive medical image control system (Mimics) were selected as an observation group, and the patients who did not receive 3D-CTBA were selected as a control group. The relevant clinical indicators were compared between the two groups. Results A total of 59 patients were included, including 29 males and 30 females, aged 25-79 years. There were 37 patients in the observation group, and 22 patients in the control group. The operation time (163.0±48.7 min vs. 188.8±43.0 min, P=0.044), intraoperative blood loss [10.0 (10.0, 20.0) mL vs. 20.0 (20.0, 35.0) mL, P<0.001], and preoperative puncture localization rate (5.4% vs. 31.8%, P=0.019) in the observation group were better than those in the control group. There was no statistically significant difference in the thoracic tube placement time, thoracic fluid drainage volume, number of intraoperative closure nail bin, postoperative hospital stay, or postoperative air leakage incidence (P>0.05) between the two groups. Conclusion For patients who need to undergo anatomical pulmonary segmentectomy, using Mimics software to produce 3D-CTBA before surgery can help accurately identify pulmonary arteriovenous anatomy, reduce surgical time and intraoperative blood loss, help to determine the location of nodules and reduce invasive localization before surgery, and alleviate patients' pain, which is worthy of clinical promotion.
ABSTRACT
The finite element method(FEM)is a widely employed mathematical technique in mechanical research that divides an object into discrete and interacting finite elements. Medically, finite element analysis(FEA)enables the simulation of biomechanical experiments that are challenging to conduct. Orbital surgery poses significant challenges to ophthalmologists due to its inherent difficulty and steep learning curve. FEM enables the simulation and analysis of the mechanical properties of orbital tissue, offering a novel approach for diagnosing and treating orbital-related diseases. With technological advancements, FEM has significantly matured in the diagnosis and treatment of orbital diseases, becoming a popular area of research in orbital biomechanics. This paper reviewed the latest advancements in orbital FEM, encompassing the development of orbital FEA models, simulation of orbital structure, and its application in orbital-related diseases. Additionally, the limitations of FEM and future research directions are also discussed. As a digital tool for auxiliary diagnosis and treatment, orbital FEA will progressively unlock its potential for diagnosing and treating orbital diseases alongside technological advancements.
ABSTRACT
Objective To study the stress change characteristics of the cervical disc after removing different ranges of the uncinate process by establishing a three⁃dimensional finite element model of the C
ABSTRACT
Nasal drug delivery efficiency is highly dependent on the position in which the drug is deposited in the nasal cavity. However, no reliable method is currently available to assess its impact on delivery performance. In this study, a biomimetic nasal model based on three-dimensional (3D) reconstruction and three-dimensional printing (3DP) technology was developed for visualizing the deposition of drug powders in the nasal cavity. The results showed significant differences in cavity area and volume and powder distribution in the anterior part of the biomimetic nasal model of Chinese males and females. The nasal cavity model was modified with dimethicone and validated to be suitable for the deposition test. The experimental device produced the most satisfactory results with five spray times. Furthermore, particle sizes and spray angles were found to significantly affect the experimental device's performance and alter drug distribution, respectively. Additionally, mometasone furoate (MF) nasal spray (NS) distribution patterns were investigated in a goat nasal cavity model and three male goat noses, confirming the in vitro and in vivo correlation. In conclusion, the developed human nasal structure biomimetic device has the potential to be a valuable tool for assessing nasal drug delivery system deposition and distribution.
ABSTRACT
Objective:To investigate the alterations in soft tissue morphology and thickness in the mid-face region of patients with cleft lip and palate (UCLP) secondary to maxillofacial deformity following Le Fort I osteotomy.Methods:A total of 22 patients (16 males and 6 females aged from 17 to 28 years with an average of 20 years) diagnosed with cleft lip and palate secondary to maxillofacial deformity were collected from the Wuhan University Hospital of Stomatology from July 2012 to August 2020. All patients underwent Le Fort I osteotomy. CBCT scans were obtained at T0 (3 days before surgery), T1 (7 days after surgery), and T2 (1 year after surgery). The Dolphin11.95 software and 3D Slicer software were utilized to measure and analyze the soft tissue near the mid-face osteotomy line. Differences in soft tissue thickness before and after surgery were compared.Results:Before and after the operation, the soft tissue thickness at P3, P5, P6, and P8 on the affected side was thicker than that on the healthy side, and the difference was statistically significant, with a P-value of <0.05. At P5, P6, P7, P8, and P9 below the osteotomy line at T2-T0, the degree of postoperative thinning on the affected side was more apparent than that on the healthy side, and there was statistical significance at P6 ( P<0.05). The postoperative soft tissue asymmetry in the Ck region was improved compared with the preoperative one. The preoperative average protruding of the affected side was 0.63 compared with the healthy side, and the postoperative value was 0.17. The preoperative and postoperative Mann-Whitney U tests showed significantly statistical difference. Conclusions:After Le Fort I osteotomy, the facial asymmetry of patients with unilateral cleft lip and palate secondary to maxillofacial deformity is improved. However, there is still a difference in the soft tissue thickness between the healthy side and the affected side, and the change in soft tissue thickness on the affected side is more significant than that on the healthy side.
ABSTRACT
Objective:To investigate the clinical effect of a 3D reconstruction assisted preoperative optimal design of anterolateral abdomen cross-region free perforator flaps for repair of soft tissue defects of limbs.Methods:Twenty patients who were treated for soft tissue defects of hand, forearm, foot and ankle in the Department of Hand Surgery, the Sixth Hospital of Ningbo from October 2017 to January 2020 were included in this study. Among the patients,17 had soft tissue defects in hand and forearm and 3 with composite tissue defects including ankle and soft tissue defect of foot. The sizes of soft tissue defects in limbs ranged from 6 cm × 8 cm - 36 cm × 18 cm. Twenty free cross-area perforator flaps were optimal designed with CTA and 3D assisted reconstruction before surgery. Following combinations of flaps were designed: (1) Free perforator flap with inferior abdominal artery and superior abdominal artery; (2) Free perforator flap with superficial iliac circumflex artery and deep iliac circumflex artery; (3) Free perforator flap with superficial iliac circumflex artery and inferior abdominal wall perforator artery; (4) Free perforator flap with perforators of superficial iliac circumflex artery plus superficial abdominal artery; (5) Free perforator flap with perforating artery of lower abdominal wall and superficial artery of abdominal wall. The overall nutritional area of a combined flap were 272.3 cm 2± 12.5 cm 2, 107.4 cm 2± 9.3 cm 2, 193.6 cm 2± 24.2 cm 2, 155.2 cm 2± 20.1 cm 2 and 203.7 cm 2± 16.3 cm 2, respectively. All the donor sites were sutured directly in one stage. The appearance, texture, blood supply, colour, joint movement of affected limbs, recovery and function of donor sites were observed through postoperative follow-up visits at the outpatient clinic. Results:Among the 20 anterolateral transventral perforator flaps, 18 flaps survived successfully; One had partial necrosis after surgery, and healed after dressing change. Subcutaneous haematoma occurred in 1 flap, and survived after drainage. In this study, there was no postoperative infection of flap. A total of 19 flaps healed in one stage, except 1 that had a delayed healing and the flap wound was closed after dressing change for 1 week. According to Disability of Arm, Shouder and Hand (DASH) questionnaire evaluation, which is widely used in the world to evaluate the therapeutic effect after limb injury, combined with the 6-12 months of follow-up, the functional recovery of 17 patients with upper limbs iniury was 7 in excellent, 9 in good and 1 in poor. The overall excellent and good rate achieved 94.1%. All the 3 patients with foot injury recovered well, and the walking and jumping were not significantly affected. The results were all excellent according to the Maryland Foot Function Scoring. Sensation of flaps was evaluated according to the British Sensory Function Evaluation, it showed: 3 in S 2, 15 in S 3 and 2 in S 3+. All 20 flaps had good blood supply, in soft texture, good colour, feeling, thickness and movement. The donor sites all healed well. Conclusion:Combined with an optimal preoperative design, the perforator flap of anterior lateral wall cross-region can obtain a satisfactory clinical efficacy in repair of large area soft tissue defects. It is a feasible treatment method.
ABSTRACT
Objective:To elucidate the spatial distribution patterns of the right hepatic vein by analyzing the image information obtained after CT three-dimension reconstruction of liver to provide guidance in surgical planning of anatomical hepatectomy.Methods:A retrospective analysis was performed on the clinical data of 77 subjects who underwent CT examination of the liver at the Second Affiliated Hospital of Harbin Medical University from September 2018 to October 2021. There were 42 males and 35 females, aged (50.2±12.8) years old. CT DICOM data of the patients were collected, and the two-dimensional image data were reconstructed into a three-dimensional model by using the 3D reconstruction software. The characteristics and typing were studied by analyzing the number of branches of the right hepatic vein and the spatial location of the main trunk.Results:Of 77 subjects, 645 branches of the right hepatic vein were observed in the liver CT 3D reconstruction model, including 268 (41.6%) right-sided branches, 240 (37.2%) dorsal branches, 70 (10.9%) left-sided branches, and 67 (10.3%) ventral branches. Each right hepatic vein possessed 3 (3, 4) right-sided branches, 3 (3, 4) dorsal branches, 1 (0, 1) left-sided branch, and 1 (0, 1) ventral branch. The numbers of branches in the four directions were significantly different ( H=175.89, P<0.001). Comparison showed that the number of right-sided branches was significantly more than that of the left-sided (χ 2=136.86) and ventral (χ 2=140.07), respectively. The number of dorsal branches was more than that of left-sided (χ 2=-123.36) and ventral (χ 2=126.57) branches, respectively. The differences were significant ( P<0.001). There were no significant differences between the number of ventral and left-sided branches, and between the dorsal and right-sided branches (all P>0.05). Conclusion:The right hepatic vein had fewer ventral and left-sided branches. It is relatively safe to dissect the right hepatic vein from the ventral or the left side during surgery. For resection of the central liver segments or segment VIII of the liver, it is reasonable to transect the liver along the left border of the right hepatic vein.
ABSTRACT
Objective:To explore the application effect of case-based learning (CBL) combined with three-dimensional (3D) imaging technology in thoracic surgery probationary teaching.Methods:Ninety thoracic surgery interns in the Affiliated Hospital of Yangzhou University, China in 2019 were selected and divided into the conventional theoretical teaching group (group A), CBL group (group B), and CBL combined with 3D imaging technology group (group C) according to the random number table method. Group A was taught with conventional theory; group B was taught by CBL; in group C, 3D imaging software was used to reconstruct computed tomography data based on CBL. The theoretical scores of the three groups were evaluated respectively, and a questionnaire survey was conducted on the students (including whether the teaching is conducive to stimulating the interest and enthusiasm of learning, whether it is conducive to the establishment of clinical thinking, evaluation of advantages and disadvantages of the teaching method, and whether the teaching method is conducive to the mastery of theoretical knowledge). SPSS 20.0 was used for analysis of variance, t test, and Chi-square test. Results:The theoretical score of group A (85.83±4.62) was the lowest, and the theoretical score of group B was significantly lower than that of group C (89.71±5.84 vs. 94.60±6.28); the answer time of group C (286.68±77.56 seconds) was the shortest, and the answer time of group B was significantly shorter than that of group A (359.78±80.55 vs. 423.31±83.53 seconds, P<0.001). Group C was significantly better than group B and group A in the aspects of stimulating interest and enthusiasm in teaching, conducive to the establishment of clinical thinking, advantages of the teaching method, and conducive to the mastery of theoretical knowledge, and group B was significantly better than group A ( P<0.001). Conclusion:The combination of CBL and 3D reconstruction technology improves the recognition of thoracic surgery interns to the teaching method, increases their theoretical scores, stimulates their learning interest and enthusiasm, cultivates their clinical thinking, and enhances their mastery of theoretical knowledge.
ABSTRACT
OBJECTIVES@#To investigate the reliability and accuracy of deep learning technology in automatic sex estimation using the 3D reconstructed images of the computed tomography (CT) from the Chinese Han population.@*METHODS@#The pelvic CT images of 700 individuals (350 males and 350 females) of the Chinese Han population aged 20 to 85 years were collected and reconstructed into 3D virtual skeletal models. The feature region images of the medial aspect of the ischiopubic ramus (MIPR) were intercepted. The Inception v4 was adopted as the image recognition model, and two methods of initial learning and transfer learning were used for training. Eighty percent of the individuals' images were randomly selected as the training and validation dataset, and the remaining were used as the test dataset. The left and right sides of the MIPR images were trained separately and combinedly. Subsequently, the models' performance was evaluated by overall accuracy, female accuracy, male accuracy, etc.@*RESULTS@#When both sides of the MIPR images were trained separately with initial learning, the overall accuracy of the right model was 95.7%, the female accuracy and male accuracy were both 95.7%; the overall accuracy of the left model was 92.1%, the female accuracy was 88.6% and the male accuracy was 95.7%. When the left and right MIPR images were combined to train with initial learning, the overall accuracy of the model was 94.6%, the female accuracy was 92.1% and the male accuracy was 97.1%. When the left and right MIPR images were combined to train with transfer learning, the model achieved an overall accuracy of 95.7%, and the female and male accuracies were both 95.7%.@*CONCLUSIONS@#The use of deep learning model of Inception v4 and transfer learning algorithm to construct a sex estimation model for pelvic MIPR images of Chinese Han population has high accuracy and well generalizability in human remains, which can effectively estimate the sex in adults.
Subject(s)
Adult , Female , Humans , Male , Young Adult , Middle Aged , Aged , Aged, 80 and over , Deep Learning , Imaging, Three-Dimensional , Pelvis , Reproducibility of Results , Tomography, X-Ray ComputedABSTRACT
OBJECTIVES@#This study aimed to explore the relationship between alveolar cleft and secondary nasal deformity post unilateral cleft lip repair in adults.@*METHODS@#A total of 27 patients aged 16-30 years old with unilateral secondary nasal deformity and alveolar cleft were included, 13 of whom underwent bone grafting. Spiral CT data of all preoperative and postoperative patients who had alveolar bone grafting were collected. Then, Mimics software was used for three-dimensional reconstruction to evaluate the correlation between the width, height, and volume of the alveolar cleft and those of the nasal deformity. The difference in nasal deformity before and after alveolar bone grafting was also explored.@*RESULTS@#The width of the alveolar cleft was positively correlated with the difference in bilateral nostril floor width (P<0.05). As the effective depth of the alveolar cleft increased, the sub-alare inclination angle largened (P<0.05). However, no significant difference was found in the nasal deformity between before and after alveolar bone grafting.@*CONCLUSIONS@#Alveolar cleft is closely related to secondary nasal deformities post unilateral cleft lip repair, especially nasal floor deformities. Alveolar bone grafting benefits adult patients for the improvement of secondary nasal deformities post unilateral cleft lip repair.
Subject(s)
Humans , Adult , Adolescent , Young Adult , Nose/surgery , Cleft Lip/surgery , Rhinoplasty/methods , Imaging, Three-Dimensional , Treatment Outcome , Cleft Palate/complicationsABSTRACT
Objective To provide anatomical basis for clinical treatment of acromioclavicular joint dislocation by studying the morphology of coracoid process of human scapula. Methods A total of 500 patients with shoulder injury were selected from the Affiliated Hospital of Traditional Chinese Medicine of Southwest Medical University in Sichuan Province, and 300 patients were selected as subjects, including 159 cases of right shoulder and 141 cases of left shoulder. CT scan images and 3D reconstruction results of scapula of the subjects were collected. The basic morphological characteristics of coracoid process CT images of the subjects were observed, and the relevant parameters were measured, including the longest horizontal distance of the coracoid process tip and the thickness of the midpoint (cd, pp’), the distance from the upper part of the coracoid process scapula to the base and the thickness of the midpoint (mn, kk’). The distance from the apex of the coracoid process to the base of the coracoid process (ab), the longest horizontal distance of the recursion part of the coracoid process (ef), the distance of as (point s was the intersection of point a perpendicular to mn), the distance of hj (point h and j were the intersection of the base of the coracoid process and the recursion part respectively), and ik (point i was the intersection of point k perpendicular to mn and the coracoid process retraction). Results According to the morphological characteristics of coracoid process, they were divided into five types, including peanut 29. 7%; Short rod type accounted for 27. 4%; Melon seed type accounted for 12. 6%; Rod type accounted for 17. 0%; Wedge type accounted for 13. 3%. Through data comparison, it was found that the distance ef and distance hj on the left were larger than those on the right, P<0. 05. All types had statistical difference in comparison distance cd, P<0. 05. The melon seed type showed statistical differences with peanut type, wedge type, long stick type and short stick type in thickness pp’, distance ab and as of point p, P<0. 05. In the comparison of point K thickness kk’, there was statistical difference between melon seed type and other four types, P<0. 05. In the distance ab comparison, there was statistical difference between the short bar type and the other four types, P < 0. 05. Conclusion The study on the morphology of coracoid process can provide anatomical basis for clinical reconstruction of coracoid ligament to treat acromioclavicular joint dislocation.
ABSTRACT
Objective To establish the spatial course of distal tubule and afferent arterioles after macula densa, and to locate and detect the proteins in the adjacent parts by using three-dimensional visualization technology of microstructure. Methods C57 BL/6J mice were fixed by perfusion and embedded in epon 812. Tissue blocks were cut perpendicular to the longitudinal axis of the kidney. And a total of 720, 2. 5 μm-thick consecutive sections were obtained from the renal capsule to the outer stripe of the renal outer medulla. After aligning the digital microscopic images through computer registration procedures, the tubules and vessels were traced by 3D reconstruction program edited by C Language. Selecting the tissue sections of the contact site and applying the improved immunoperoxidase staining method to detect H
ABSTRACT
Objective To explore the range of normal female pelvic diameter lines in Tibetan nationality. Methods The subjects were Tibetan nationality female who underwent pelvic CT examination in the Radiology Department from January 2016 to December 2019 at the General Hospital of the Tibet Military Region of PLA. Ninty-six samples between the ages of 22 and 65 years, with an average age (46.06±11.42)years were recruited. Mimics 19.0 software was used to construct the digital three-dimensional model of pelvis, and to measure transverse diameter(TD), obstetric conjugate(OC), interspinous distance(ISD), sagittal midpelvic diameter(SMD), intertuberous distance(ITD), sagittal outlet diameter(SOD),diagonal conjugate diameter(DCD),sacrum length(SL), penal height(PH).Analysis of variance was used to compare different age groups, and Pearson correlation analysis was used to analyze the relationship between age and pelvic diameter. Results The linear measurement of TD was (132.08±6.15) mm, OC was (112.44±9.43) mm, ISD was (107.30±8.70), SMD was (129.06±7.73) mm, ITD was (123.02±12.08) mm, SOD was (118.80±8.87) mm, DCD was (127.49±9.80) mm, SL was (102.56±10.88) mm and PH was (36.57±4.57) mm.Cluster analysis showed that Lhasa Tibetans were closest to Uygurs. Conclusion The close clustering relationship between Tibetans and Uygurs in Lhasa suggests that there is a possibility of gene exchange between Tibetans and Uygurs in Hotan area in ancient times. The pelvic diameter of Tibetan women in Lhasa has changed significantly. Narrower OC, SL and PH make the pelvis flat, which is more and more detrimental to natural childbirth.
ABSTRACT
Objective To compare the measurement differences between the skull 3D printed model and the real specimen under different CT scan slice thicknesses, and to explore the effect of slice thickness on the accuracy of the 3D printed model. Methods Eight normal skull specimens (marked as Nos. f-8) (group N) were used for CT scanning with different slice thicknesses, specifically 0.625 mm (group A),1.25 mm (group B) , and 2.5mm (group C) ,3.75 mm (group D) , and 5 mm (group E) , and then earned out 3D reconstruction and 3D printing respectively, and compared the anatomical reduction degree of the foramen magnum diameter, anterior clinoid distance, and butterfly wing distance of the 3D printed skull model. Results The reduction degree of anatomical structure of 3D printed skull model decreased with the increase of CT slice thickness. There was no significant difference in the accuracy of 3D model among groups A, B and C (P >0.05 ) . There was a high correlation between group A, B and C and group N ( P < 0 .05 ).The size indexes and statistical values of group A, B and C were similar. Conclusion CT slice thickness has a significant effect on the accuracy and reduction of the 3D printed skull model. The 3D printed model with thin slice data (0.625 mm,1.25 mm,2.5 mm) has higher accuracy and less difference.
ABSTRACT
OBJECTIVE@#To investigate the feasibility of MRI three-dimensional (3D) reconstruction model in quantifying glenoid bone defect by comparing with CT 3D reconstruction model measurement.@*METHODS@#Forty patients with shoulder anterior dislocation who met the selection criteria between December 2021 and December 2022 were admitted as study participants. There were 34 males and 6 females with an average age of 24.8 years (range, 19-32 years). The injury caused by sports injury in 29 cases and collision injury in 6 cases, and 5 cases had no obvious inducement. The time from injury to admission ranged from 4 to 72 months (mean, 28.5 months). CT and MRI were performed on the patients' shoulder joints, and a semi-automatic segmentation of the images was done with 3D slicer software to construct a glenoid model. The length of the glenoid bone defect was measured on the models by 2 physicians. The intra-group correlation coefficient ( ICC) was used to evaluate the consistency between the 2 physicians, and Bland-Altman plots were constructed to evaluate the consistency between the 2 methods.@*RESULTS@#The length of the glenoid bone defects measured on MRI 3D reconstruction model was (3.83±1.36) mm/4.00 (0.58, 6.13) mm for physician 1 and (3.91±1.20) mm/3.86 (1.39, 5.96) mm for physician 2. The length of the glenoid bone defects measured on CT 3D reconstruction model was (3.81±1.38) mm/3.80 (0.60, 6.02) mm for physician 1 and (3.99±1.19) mm/4.00 (1.68, 6.38) mm for physician 2. ICC and Bland-Altman plot analysis showed good consistency. The ICC between the 2 physicians based on MRI and CT 3D reconstruction model measurements were 0.73 [95% CI (0.54, 0.85)] and 0.80 [95% CI (0.65, 0.89)], respectively. The 95% CI of the difference between the two measurements of physicians 1 and 2 were (-0.46, 0.49) and (-0.68, 0.53), respectively.@*CONCLUSION@#The measurement of glenoid bone defect based on MRI 3D reconstruction model is consistent with that based on CT 3D reconstruction model. MRI can be used instead of CT to measure glenoid bone defects in clinic, and the soft tissue of shoulder joint can be observed comprehensively while reducing radiation.
Subject(s)
Male , Female , Humans , Young Adult , Adult , Imaging, Three-Dimensional/methods , Tomography, X-Ray Computed/methods , Joint Instability , Shoulder Joint/diagnostic imaging , Shoulder Dislocation , Magnetic Resonance Imaging/methodsABSTRACT
@#Objective To assess the clinical value of preoperative localization coupled with computed tomography (CT) three-dimensional reconstruction in pulmonary nodule-centered uniportal thoracoscopic combined subsegmental/segmental resection. Methods The clinical data of 30 patients of combined subsegmental/segmental resection in our hospital from December 2019 to October 2021 were retrospectively collected. There were 19 males and 11 females with the mean age of 56.4 (32.0-71.0) years. The pulmonary nodules were located by CT-guided injection of glue before operation. The three-dimensional reconstruction image and operation planning were carried out by Mimics 21.0 software. Results The operations were all successfully performed, and there was no conversion to open thoracotomy or lobectomy. The mean tumor diameter was 11.6±3.5 mm, the mean distance between the nodule and the visceral pleura was 13.6±5.6 mm, the mean width of the actual cutting edge was 25.0±6.5 mm, the mean operation time was 110.2±23.8 min, the mean number of lymph node dissection stations was 6.5±2.4, the mean amount of intraoperative bleeding was 50.8±20.3 mL, the mean retention time of thoracic catheter was 3.2±1.1 d, and the mean postoperative hospital stay was 4.5± 1.7 d. There was 1 patient of subcutaneous emphysema, 1 patient of atrial fibrillation and 1 patient of blood in sputum. Conclusion Preoperative CT-guided injection of medical glue combined with CT three-dimensional reconstruction of pulmonary bronchus and blood vessels is safe and feasible in pulmonary nodule-centered uniportal thoracoscopic combined subsegmental/segmental resection, which ensures the surgical margin and reserves lung tissues.
ABSTRACT
BACKGROUND@#Since the popularization of computed tomography (CT) technology, the detection rate of pulmonary ground glass nodules (GGNs) with imaging follow-up as the main management method has increased significantly. The purpose of this study is to quantitatively analyze the changes of pulmonary GGNs during the follow-up process with three-dimensional reconstruction technology, explore the natural progression of pulmonary GGNs, and provide effective basis for clinical guidance for patients to conduct reasonable management of nodules.@*METHODS@#A total of 115 cases of pulmonary GGNs with regular follow-up in the Combined Outpatient Department of Zhoushan Hospital from March 2015 to November 2022 were enrolled. Quantitative imaging features of nodules were extracted by semi-automatic segmentation of 3D Slicer software to evaluate the growth of nodules and clinical intervention during follow-up.@*RESULTS@#The average baseline age of the patients was (56.9±10.1) yr. The mean follow-up time was (48.8±18.9) months. The two-dimensional diameter of baseline CT scan was (7.9±2.9) mm, and the maximum three-dimensional diameter was (10.1±3.4) mm. The two-dimensional diameter of the last CT scan was (9.9±4.7) mm, and the maximum three-dimensional diameter was (11.4±5.1) mm. A total of 27 cases (23.5%) showed an increase during follow-up, with a median volume doubling time of 822 days and a median mass doubling time of 1,007 days. 32 cases were surgically resected, including 6 cases of invasive adenocarcinoma (IAC), 16 cases of minimally invasive adenocarcinoma (MIA), 8 cases of adenocarcinoma in situ (AIS) and 2 cases of atypical adenomatous hyperplasia (AAH). Five nodules underwent surgical intervention due to the progression of two-dimensional diameter, which was pathologically confirmed as pre-invasive lesions, but their three-dimensional maximum diameter showed no significant change. Nodular morphology, lobulated sign, spiculated sign and vacuole signs all promoted the growth of nodules in univariate analysis. There were significant differences in age, baseline diameter, mean CT value, median CT value, 10% and 90% percentile CT number between the growth group and the stable group (P<0.05). Multivariate Logistic regression analysis showed that age and average CT value were risk factors for nodule growth (P<0.05). Receiver-operating characteristic (ROC) curve analysis results indicated that the age ≥63 years old, the baseline three-dimensional maximum diameter ≥9.2 mm, and the average CT value ≥-507.8 HU were more likely to accelerate the growth of GGNs. The maximum three-dimensional diameter ≥14.4 mm and the average CT value ≥-495.7 HU may be a higher malignant probability.@*CONCLUSIONS@#GGNs show an inert growth process, and the use of three-dimensional measurements during follow-up is of greater significance. For persistent glass grinding nodules ≥63 years old, the baseline three-dimensional maximum diameter ≥9.2 mm, and the average CT value ≥-507.8 HU are more likely to increase. However, most nodules still have good prognosis after progression, and long-term follow-up is safe.
Subject(s)
Humans , Middle Aged , Lung Neoplasms/pathology , Imaging, Three-Dimensional , Neoplasm Invasiveness , Retrospective Studies , Multiple Pulmonary Nodules/pathology , Adenocarcinoma/pathologyABSTRACT
OBJECTIVE@#To evaluate the feasibility of S2 alar iliac screw insertion in Chinese children using computerized three-dimension reconstruction and simulated screw placement technique, and to optimize the measurement of screw parameters.@*METHODS@#A total of 83 pelvic CT data of children who underwent pelvic CT scan December 2018 to December 2020 were retrospectively analyzed, excluding fractures, deformities, and tumors. There were 44 boys and 39 girls, with an average age of (10.66±3.52) years, and were divided into 4 groups based on age (group A:5 to 7 years old;group B:8 to 10 years old;group C:11-13 years old;group D:14 to 16 years old). The original CT data obtained were imported into Mimics software, and the bony structure of the pelvis was reconstructed, and the maximum and minimum cranial angles of the screws were simulated in the three-dimensional view with the placement of 6.5 mm diameter S2 alar iliac screws. Subsequently, the coronal angle, sagittal angle, transverse angle, total length of the screw, length of the screw in the sacrum, width of the iliac, and distance of the entry point from the skin were measured in 3-Matic software at the maximum and minimum head tilt angles, respectively. The differences among the screw parameters of S2 alar iliac screws in children of different ages and the differences between gender and side were compared and analyzed.@*RESULTS@#In all 83 children, 6.5 mm diameter S2 iliac screws could be placed. There was no significant difference between the side of each screw placement parameter. The 5 to 7 years old children had a significantly smaller screw coronal angle than other age groups, but in the screw sagittal angle, the difference was more mixed. The 5 to 7 years old children could obtain a larger angle at the maximum head tilt angle of the screw, but at the minimum cranial angle, the larger angle was obtained in the age group of 11 to 13 years old. There were no significant differences among the age groups. The coronal angle and sagittal angle under maximum cephalic angle and minimum cranial angle of 5 to 7 years old male were (40.91±2.91)° and (51.85±3.75)° respectively, which were significantly greater than in female. The coronal angle under minimum cranial angle was significantly greater in girls aged 8-10 years old than in boys. For the remaining screw placement angle parameters, there were no significant differences between gender. The differences in the minimum iliac width, the screw length, and the length of the sacral screws showed an increasing trend with age in all age groups. The distance from the screw entry point to the skin in boys were significantly smaller than that of girls. The minimum width of the iliac in boys at 14 to 16 years of age were significantly wider than that in girls at the same stage. In contrast, in girls aged 5 to 7 years and 11 to 13 years, the screw length was significantly longer than that of boys at the same stage.@*CONCLUSION@#The pelvis of children aged 5 to 16 years can safely accommodate the placement of 6.5 mm diameter S2 alar iliac screws, but the bony structures of the pelvis are developing and growing in children, precise assessment is needed to plan a reasonable screw trajectory and select the appropriate screw length.
Subject(s)
Humans , Male , Female , Child , Adolescent , Child, Preschool , Ilium/surgery , Retrospective Studies , Feasibility Studies , Bone Screws , Pelvis , Sacrum/surgery , Spinal Fusion/methodsABSTRACT
OBJECTIVE@#To explore the feasibility and early effectiveness of computer-simulated osteotomy based on the health-side combined with guide plate technique in the treatment of cubitus varus deformity in adolescents.@*METHODS@#The clinical data of 23 patients with cubitus varus deformity who met the selection criteria between June 2019 and February 2023 were retrospectively analyzed. There were 17 males and 6 females, ranging in age from 4 to 16 years with an average of 8.5 years. The time from injury to operation was 1-4 years. The angle of distal humerus rotation was defined by humeral head posterior inclination angle using low radiation dose CT to scan the patient's upper extremity data at one time, and the preoperative rotation of the distal humerus on the affected side was (33.82±4.39)°. The CT plain scan data were imported into 9yuan3D digital orthopaedic system (V3.34 software) to reconstruct three-dimensional images of both upper extremities. The simulated operation was performed with the healthy upper extremity as the reference, the best osteotomy scheme was planned, overlapped and compared, and the osteotomy guide plate was prepared. The patients were followed up regularly after operation, and the formation of callus in the osteotomy area was observed by X-ray examination. Before and after operation, the carrying angle of both upper extremities (the angle of cubitus valgus was positive, and the angle of cubitus varus was negative) and anteversion angle were measured on X-ray and CT images. At the same time, the flexion and extension range of motion of elbow joint and the external rotation range of motion of upper extremity were measured, and Mayo score was used to evaluate the function of elbow joint.@*RESULTS@#The operation time ranged from 34 to 46 minutes, with an average of 39 minutes. All patients were followed up 5-26 months, with a mean of 14.9 months. All the incisions healed by first intention after the operation; 2 patients had nail path irritation symptoms after Kirschner wire fixation, which improved after dressing change; no complication such as breakage and loosening of internal fixators occurred after regular X-ray review. Continuous callus formed at the osteotomy end at 4 weeks after operation, and the osteotomy end healed at 8-12 weeks after operation. At last follow-up, the carrying angle, anteversion angle, external rotation range of motion, and extension and flexion range of motion of the elbow joint of the affected side significantly improved when compared with preoperative ones ( P<0.05). Except for the extension range of motion of the healthy elbow joint ( P<0.05), there was no significant difference in other indicators between the two sides ( P>0.05). At last follow-up, the Mayo elbow score was 85-100, with an average of 99.3; 22 cases were excellent, 1 case was good, and the excellent and good rate was 100%.@*CONCLUSION@#Computer-simulated osteotomy based on health-side combined with guide plate technique for treating cubitus varus deformity in adolescents can achieve precise osteotomy, which has the advantages of short operation time and easy operation, and the short-term effectiveness is satisfactory.
Subject(s)
Male , Female , Humans , Adolescent , Child, Preschool , Child , Elbow , Humeral Fractures/surgery , Retrospective Studies , Joint Deformities, Acquired/surgery , Elbow Joint/surgery , Limb Deformities, Congenital , Osteotomy/methods , Humeral Head , Range of Motion, Articular , Computers , Treatment OutcomeABSTRACT
OBJECTIVE@#To investigate the correlation between glenohumeral joint congruence and stability in recurrent shoulder dislocations.@*METHODS@#Eighty-nine patients (89 sides) with recurrent shoulder dislocation admitted between June 2022 and June 2023 and met the selection criteria were included as study subjects. There were 36 males and 53 females with an average age of 44 years (range, 20-79 years). There were 40 cases of left shoulder and 49 cases of right shoulder. The shoulder joints dislocated 2-6 times, with an average of 3 times. The three-dimensional models of the humeral head and scapular glenoid were reconstructed using Mimics 20.0 software based on CT scanning images. The glenoid track (GT), inclusion index, chimerism index, fit index, and Hill-Sachs interval (HSI) were measured, and the degree of on/off track was judged (K value, the difference between HSI and GT). Multiple linear regression was used to analyze the correlation between the degree of on/off track (K value) and inclusion index, chimerism index, and fit index.@*RESULTS@#Multiple linear regression analysis showed that the K value had no correlation with the inclusion index ( P>0.05), and was positively correlated with the chimerism index and the fit index ( P<0.05). Regression equation was K=-24.898+35.982×inclusion index+8.280×fit index, R 2=0.084.@*CONCLUSION@#Humeral head and scapular glenoid bony area and curvature are associated with shoulder joint stability in recurrent shoulder dislocations. Increased humeral head bony area, decreased scapular glenoid bony area, increased humeral head curvature, and decreased scapular glenoid curvature are risk factors for glenohumeral joint stability.