ABSTRACT
Objective:To investigate the effects of 3D video thoracoscopic surgery combined with 3D CTBA (three-dimensional computed tomography bronchography and angiography) method in clinical education practice of the undergraduates.Methods:The study included in 60 undergraduate clinical interns from our hospital, and they were randomly divided into the experimental group ( n=30) and control group ( n=30). The teaching content was diagnosis and surgical treatment of lung cancer. The experimental group applied 3D video thoracoscopic surgery combined with 3D CTBA teaching method. The interns studied the anatomy of lung and diagnosis of lung cancer based on the 3DCTBA and visited the operation of lung cancer under 3D thoracoscopy, which enhanced their knowledge of anatomical structure of lung. The control group applied traditional thoracoscopic surgery for lung cancer. Upon termination of clinic practice, all interns were tested with theoretical and clinical knowledge of lung cancer. A questionnaire survey was conducted among them to access the teaching effect. SPSS 18.0 was used for t test and chi-square test. Results:The scores of theory test were not significantly different between two groups. The scores of anatomic and operational knowledge of lung in the experimental group were significantly higher compared with the control group ( P<0.05). Questionnaire result showed that new teaching method could promote the interest in learning, motivated the desire for thoracic surgery, and improved the comprehension of clinical knowledge. More students approved the new teaching method. Conclusion:The new method, 3D video thoracoscopic surgery combined with 3D CTBA, has beneficial effect on clinical interns, which contributes to inspire the motivation and interest of learning and deepen clinic knowledge, and is a promising teaching method worthy of further exploration and application.
ABSTRACT
@#More and more relevant research results show that anatomical segmentectomy has the same effect as traditional lobectomy in the surgical treatment of early-stage non-small cell lung cancer (diameter<2.0 cm). Segmentectomy is more difficult than lobotomy. Nowadays, with the promotion of personalization medicine and precision medicine, three-dimensional technique has been widely applied in the medical field. It has advantages such as preoperative simulation, intraoperative positioning, intraoperative navigation, clinical teaching and so on. It plays a key role in the discovery of local anatomical variation of pulmonary segment. This paper reviewed the clinical application of three-dimensional technique and briefly described the clinical application value of this technique in segmentectomy.
ABSTRACT
ABSTRACT Objective: To have anatomic measurements of carotid artery bifurcation (CAB) with 64-spiral computed tomography angiography (64-SCTA), and provide anatomic basis for related research. Methods: Imaging data of 92 subjects (45 males, 47 females, the age range 20-82 years and mean age 48.4 ± 6.1 years) without pathology of CAB, who underwent 64-SCTA in head and neck from June 1, 2008 to June 30, 2010, were selected from the Picture Archiving and Communication Systems in Zhongshan Hospital of Xiamen University, Fujian, China. On the 3D images, the angle and size of CAB were measured, and the statistical comparisons of measurements were made between the bilateral, sex and age groups. Results: The measurements of CAB were divided into young (≤ 40 years) and older (> 40 years) groups: bifurcation angle is 36.206° ± 10.210° and 49.343° ± 16.489°, respectively; the inner diameter of common carotid artery (CCA) is 6.820 ± 0.635 and 6.845 ± 0.838 mm, respectively; the proximal inner diameter of internal carotid artery (ICA) is 7.143 ± 0.992 and 7.476 ± 1.630 mm, of the enlargement is 7.568 ± 1.069 and 8.554 ± 1.733 mm, of the distal is 4.897 ± 0.508 and 5.123 ± 0.699 mm, respectively; the inner diameter of external carotid artery (ECA) is 4.324 ± 0.580 and 4.104 ± 0.638 mm, respectively. There were statistically significant differences in all the measurements between male and female groups, in the bifurcation angle, inner diameters of ICA and ECA between young and older groups, and in the bifurcation angle between the left and right (p < 0.05). Conclusion: A 64-SCTA with 3D image post-processing technique can clearly observe and show the CAB. All CAB measurements will provide the objective basis for applied anatomy, imaging diagnosis and surgery treatment.
ABSTRACT
BACKGROUND: Previous scholars often graded the height of iliac spine according to X-ray films. The quality of X-ray images is greatly affected by the photographic equipment and position. Simultaneously, X-ray film transforms the three-dimensional relationship between the iliac wing and the L5 pedicle into a planar relationship. The overlap of bone structure makes it difficult to identify anatomic markers. Especially, the combination with osteoporosis, calcification of paravertebral artery, and stasis of intestinal contents in the elderly will further affect the observation of bone structure on X-ray films. OBJECTIVE: To observe the degree of the entry point in L5 pedicle screw fixation shielded by the width and height of the iliac wing using the three-dimensional computed tomography reconstruction technique. METHODS: According to the inclusion and exclusion criteria, 350 CT images of L1-S2 region were selected as the study object. All patients signed the informed consent. This study was approved by the Hospital Ethics Committee. The degree of the entry point in L5 pedicle screw fixation shielded by the width of the iliac wing in central axis layer of the horizontal axis was analyzed using the three-dimensional computed tomography reconstruction technique and divided into levels 0, I, II, and III. The degree of the entry point in L5 pedicle screw fixation shielded by the height of the iliac wing in central axis layer of the oblique sagittal plane was analyzed and also divided into levels 0, I, II, and III. Level 0 indicates that the entry point of L5 pedicle screw is not shielded by the iliac wing, and levels I, II, and III indicate increasing degrees of entry point of L5 pedicle screw shielding by the iliac wing. The difference in the effect of width and height of the iliac wing on the shielding degree of entry point in L5 pedicle screw was compared between males and females. RESULTS AND CONCLUSION: (1) In 80.0% of patients (280/350), the entry point of L5 pedicle screw was not shielded by the width of the iliac wing. In 20.0% (70/350) of patients, the entry point of L5 pedicle screw was shielded by the width of the iliac wing. In all, 27.3% (49/179) were male, including 27 with level I shielding, 14 with level II shielding, and 8 with level III shielding; 12.3% (21/171) were female, including 12 with level I shielding, 7 with level II shielding, and 2 with level III shielding. (2) In 80.6% (68/350) of patients, the entry point of L5 pedicle screw was not shielded by the height of the iliac wing. In 19.4% (68/350) of patients, the entry point of L5 pedicle screw was shielded by the height of the iliac wing. In all, 24.0% (43/179) of these patients were male, including 23 cases with level I shielding, 16 cases with level II shielding, and 4 with level III shielding; 14.6% (25/171) were female, including 13 with level I shielding, 8 with level II shielding, and 4 with level III shielding. (3) The degree of entry point of L5 pedicle screw shielding by the width of the iliac wing on the horizontal axis was not exactly the same as that of the height of the iliac wing on the sagittal axis of the L5 pedicle screw in the same patient. In this study, there were 70 patients with wide iliac wings and 68 patients with high iliac wings; the degrees of shielding by the width and height of the iliac wing were the same in 35 cases and different in 44 cases. (4) The degree of entry point of L5 pedicle screw shielding by the width and height of the iliac wing was greater in males than in females. (5) The results confirmed that the incidence of entry point of L5 pedicle screw shielding by the iliac wing width and height was 20.0% and 19.4%, respectively. The degree of entry point of L5 pedicle screw shielding by the width and height of the iliac wing was greater in males than females. The degree of entry point of L5 pedicle screw shielding by the iliac wing width along the horizontal axis was not completely consistent with that of L5 pedicle screw shielding on the oblique sagittal plane. It is of great significance to evaluate the relationship between iliac wing and L5 pedicle screw entry point by three-dimensional computed tomography reconstruction before operation for improving the safety of L5 pedicle screw placement and decision-making of operation.
ABSTRACT
BACKGROUND@#For early-stage lung cancer, segmentectomy can get the same oncological benefits as lobectomy. Accurate identification of the intersegmental border is the key to segmentectomy. This study used extended segmentectomy and extended subsegmentectomy to treat lung intersegmental and intersubsegmental ground-glass nodules (GGN) by utilizing modified inflation-deflation methods to distinguish the intersegmental and intersubsegmental borders. The accuracy of modified inflation-deflation methods and the effectiveness of extended resection to guarantee a safe surgical margin were evaluated.@*METHODS@#A retrospective analysis of 83 cases of extended segmentectomy and extended subsegmentectomy was conducted. Preoperative three-dimensional computed tomography bronchography and angiography (3D-CTBA) revealed that nodules were involved in intersegmental or intersubsegmental veins. Based on preoperative three-dimensional reconstruction, the surgery was designed to extendedly remove the dominant lung segment or subsegment with nodules involved. When the dominant lung segment or subsegment could not be identified, the simpler lung segment or subsegment was selected for the resection. After the target vessel and bronchus were cut off during the operation, modified inflation-deflation method was used to determine the border, and a stapler was used to resect the adjacent lung segment or subsegment tissue by 2 cm-3 cm around the inflation-deflation boundary line. Then, the relationship between the inflation-deflation boundary line and the nodule and the width of the surgical margin were measured. Clinical data were collected during the perioperative period.@*RESULTS@#56 extended segmentectomies and 27 extended subsegmentectomies were performed. The average diameter of pulmonary nodules was (0.9±0.3) cm. There were 79 cases with clearly inflation-deflation boundary lines. The average time needed for the appearance of the lines was (13.6±6.5) min. In 55 cases, the nodules were involved with the inflation-deflation boundary lines. Meanwhile, the remaining 24 cases revealed an average minimum distance of (0.6±0.3) cm between nodules and the boundary lines. The average width of surgical margin was (2.1±0.3) cm in these 79 cases. No deaths or major complications appeared during 30 d after operation.@*CONCLUSIONS@#The modified inflation-deflation method can effectively define the intersegmental and intersubsegmental borders, and guarantee the safe surgical margins of extended segmentectomy and extended subsegmentectomy to treat intersegmental and intersubsegmental small lung tumors.
ABSTRACT
PURPOSE: Malunions after clavicle fractures are generally considered to cause scapular dyskinesis. This study aims to verify the incidence of scapular dyskinesis following anatomically reduced clavicle fracture and to verify the usefulness of low-dose three-dimensional (3D) scapular wing computed tomography (3D-scapula wing-CT) analysis.METHODS: Twenty-four patients with mid-clavicle fracture and four patients with distal clavicle fracture were recruited. After anatomical reduction and bony union, scapular dyskinesis was assessed by history taking and physical examination by two orthopedic doctors. The mean follow-up period for the assessment was 14.3±10.1 months. Low-dose 3D-scapular wing-CT analysis in prone position was performed with calculated effective dose 2.35 mSv, which means approximately 25% dose of conventional setting. Four observers evaluated five angles (upward rotation, internal rotation, anterior tilting, superior translation, protraction) from 3D-reconstructed images on both shoulders of a patient. Authors analyzed the results between injured to normal shoulder.RESULTS: Scapular dyskinesis or significant shortening of injured clavicle (mean clavicle length difference, − 1.77±6.36 mm) were not observed among the included 28 subjects. The difference values of the five angles between the fractured side and normal side showed no statistical significance (upward rotation: 1.51, p=0.13; superior translation: 0.89, p=0.327; anterior tilting: 1.7, p=0.096; protraction: 0.83, p=0.374; internal rotation: 0.98, p=0.406). As the interclass correlation coefficients of four observers was 0.988 (p=0.00), images from low-dose 3D-wing-CT are clear enough to assess scapular dyskinesis (interclass correlation coefficient, 0.996; p=0.00).CONCLUSION: It is important to make anatomical reduction and length restoration of clavicle fracture for preventing scapular dyskinesis. Low-dose 3D-scapular wing-CT is an effective tool for assessing scapular dyskinesis, which provides images of sufficient quality with little increase in morbidity from radiation hazard.
Subject(s)
Humans , Clavicle , Follow-Up Studies , Incidence , Orthopedics , Physical Examination , Prone Position , Radiation Dosage , ShoulderABSTRACT
@#Thoracoscopic pulmonary segmentectomy is one of the important treatment methods for early lung cancer. Only the premise of surgical precision can make the radical resection of lesions and maximum reservation of healthy lung tissue be simultaneously guaranteed. As a representative of the precise lung operation, the “cone-shaped lung segmentectomy” focuses on the lesion, and combines the anatomical characteristic of the patient to design individualized operation scheme. The technological core consists of three parts, three dimensional-computed tomography bronchography and angiography (3D-CTBA) surgery path planning, accurate definition of intersegmental demarcation and anatomic dissection of intersegmental borders along the demarcation. This paper aims to explore the technical process and quality control of the key techniques of thoracoscopic precise segmentectomy, so as to standardize the segmentectomy procedure under the principle of radical and minimally invasive therapy.
ABSTRACT
Objective To study the clinical value of virtual segmentectomy based on three-dimensional computed tomography bronchography and angiography (3D-CTBA) in thoracoscopic segmentectomy for early-stage lung cancer. Methods Totally 18 patients received thoracoscopic segmentectomy from July 2015 to July 2016 were performed virtual segmentectomy based on 3D-CTBA. The preoperative planning depended on the simulation result. Results All of the 18 cases(1 right Sl, 2 right S3, 3 right S6, 1 right S8 +9, 1 right S9 + 10, 3 left S1 +2 +3, 3 left S4 +5, 4 left S6 segmentectomies)were received thoracoscopic segmentectomy successfully. The mean operation time and intraoperative blood loss were (126.8士19.4) mins and(76.6±21.4) ml respectively. Pathological examination revealed no residual tumor cells at the surgical margins and no lymph node metastases in any patients. The actual surgical margins were all larger than 2 cm(2.37±0.39)cm. Conclusion Virtual segmentectomy based on 3D-CTBA can non-invasively visualize the relationship between the safe margin and segmental vessels and bronchi. It facilitates the preoperative planning of suitable segmentectomy procedure for patients with early-stage lung cancer.
ABSTRACT
Objective@#To investigate the potential dosimetric benefits of four-dimensional computed tomography (4DCT) compared to three-dimensional CT (3DCT) in the planning of radiotherapy for external-beam partial breast irradiation (EB-PBI).@*Methods@#Three-DCT and 4DCT scan sets were acquired for 20 patients who underwent EB-PBI. For each patient a conventional 3D conformal plan (3D-CRT) was generated based on end-inhalation phase (EI). The treatment plan based on the 4DCT EI phase images was copied and applied to the end-exhalation phase (EE) and 3DCT images (defined as EB-PBIEI, EB-PBIEE, EB-PBI3D, respectively).@*Results@#The median volumes of the tumour bed based on 3DCT, EI and EE were 20.99 cm3, 19.28 cm3, and 18.78 cm3, respectively. The tumour bed volume based on 3DCT was significantly greater than that of EI and EE volumes (P<0.05). The planning target volumes (PTV) coverage of EB-PBI3D, EB-PBIEI and EB-PBIEE were 96.85%, 97.51%, 97.03%, respectively. The planning target volume (PTV) coverage of EB-PBI3D was significantly less than that of EB-PBIEI and EB-PBIEE (P<0.05). The median homogeneity indexs (HI) based on 3DCT, EI and EE were 0.13, 0.13, 0.13, respectively. The median conformal indexs (CI) based on 3DCT, EI and EE were 0.68, 0.69, 0.68, respectively. The median mean doses (Dmean) based on 3DCT, EI and EE were 36.20 Gy, 36.20 Gy, 36.22 Gy, respectively. However there were no significant differences in the homogeneity index, conformity index and the mean dose of PTV between the three treatment plans (P>0.05). The EB-PBI3D plan resulted in the largest organs at risk dose (P<0.05).@*Conclusion@#There was a significant benefit when using 4DCT to plan 3D-CRT for EB-PBI with regard to reduced non-target organ exposure, and might result in poor dose coverage when the PTV is determined using 3DCT.
ABSTRACT
Objective To investigate the effects of angle and length of lightwand in three-dimensional reconstruction images of the upper airway based on computed tomography.Methods A total of 245 patients,aged 18-86 years,were scanned by helical computed tomography in the head and neck.Reconstructed images,obtained by Aw4.4 Workstation,were printed out by the ratio of 1 ∶ 1.The tracheal tube was used to investigate the anatomic structure of the upper airway.The length L and angle α of the tracheal tube were recorded.And two distances (D1,D2) and one angle (β) were recorded:D1,the distance between the upper central incisor and root of epiglottis;D2,the distance between the root of epiglottis and midpoint of glottis;angle β,the angle of line D1 and D2.Results The oα value in male patients was significant higher than that in female patients:(70.02 ± 15.49)° vs.(55.84 ± 14.70)°.The β value in male patients was significant higher than that in female patients:(129.74 ± 14.82)° vs.(120.40 ± 14.19)°.The L value in male patients was significant higher than that in female patients:(12.80 ± 0.85) cm vs.(11.50 ± 0.65) cm.The D1 and D2value in male patients were significant higher than those in female patients:(7.53 ± 0.66) cm vs.(6.76 ± 0.53) cm,(3.13 ± 0.52) cm vs.(2.45 ± 0.32) cm.There were significant differences (P ＜ 0.05).The 245 patients were classified to 2 groups by using the function of hierarchical cluster analysis in the statistical software.The α value in group 2 was significant higher than that in group 1:(75.45 ± 9.53)° vs.(48.17 ± 9.29)°.The 3 value in group 2 was significant higher than that in group 1:(136.27 ± 9.86)° vs.(112.31 ± 8.64)°.The age in group 2 was significant higher than that in group 1:(53.92 ± 19.64) years vs.(36.93 ± 17.21) years.Correlation analysis showed that in 245 patients,angle α was positively correlated to angle β and age (P ＜ 0.05),and angle β was positively correlated to age (P ＜ 0.05).Conclusions The bent length and angle on lightwand can be affected by both the patients' gender and ages.
ABSTRACT
OBJECTIVE: To evaluate transverse skeletal and dental changes, including those in the buccolingual dental axis, between patients with skeletal Class III malocclusion and facial asymmetry after bilateral intraoral vertical ramus osteotomy with and without presurgical orthodontic treatment. METHODS: This retrospective study included 29 patients with skeletal Class III malocclusion and facial asymmetry including menton deviation > 4 mm from the midsagittal plane. To evaluate changes in transverse skeletal and dental variables (i.e., buccolingual inclination of the upper and lower canines and first molars), the data for 16 patients who underwent conventional orthognathic surgery (CS) were compared with those for 13 patients who underwent preorthodontic orthognathic surgery (POGS), using three-dimensional computed tomography at initial examination, 1 month before surgery, and at 7 days and 1 year after surgery. RESULTS: The 1-year postsurgical examination revealed no significant changes in the postoperative transverse dental axis in the CS group. In the POGS group, the upper first molar inclined lingually on both sides (deviated side, −1.8°± 2.8°, p = 0.044; nondeviated side, −3.7°± 3.3°, p = 0.001) and the lower canine inclined lingually on the nondeviated side (4.0°± 5.4°, p = 0.022) during postsurgical orthodontic treatment. There were no significant differences in the skeletal and dental variables between the two groups at 1 year after surgery. CONCLUSIONS: POGS may be a clinically acceptable alternative to CS as a treatment to achieve stable transverse axes of the dentition in both arches in patients with skeletal Class III malocclusion and facial asymmetry.
Subject(s)
Humans , Dentition , Facial Asymmetry , Malocclusion , Molar , Orthognathic Surgery , Osteotomy , Retrospective StudiesABSTRACT
Objective To modify anterior cruciate ligament (ACL)reconstruction to achieve better structure;to measure the tunnel's position and shape using three-dimensional computed tomography (CT)so as to show the change of the femoral bony tunnel.Methods Forty-five patients were diagnosed with an ACL tear and subsequently underwent the modified ACL reconstruction,using a minor-diameter drill to drill the femoral tunnel and then expand it to oval-shaped tunnel with the raspatory between July 2014 and 2015.All procedures were conducted by the same experienced surgeon (Ao Yf.).In all patients,CT was performed at one week after the ACL reconstruction to evaluate the femoral tunnel's positioning,then the CT-images were imported into the image processing software MIMICS to reconstruct the femoral bony tunnel to measure the tunnel's diameters of the section and the shape.The tunnel's position was evaluated using the quadrant method.Results In all the 45 patients,the graft could pass the tunnel.And no posterior tunnel wall blowout,neurological or vascular deficit was documented during the operation.According to the different methods of modification (6 to 7,6 to 8 and 7 to 8),the long diameters of the sections of the femoral bony tunnels were 8.34-± 0.52 mm,10.65 ± 0.72mm,9.27-± 0.11 mm,without significant difference from the theoretical value (8.16 mm,10.66 mm and 9.14 mm).However,the short diameters of the sections were 6.57--0.12 mm,6.74-± 0.13 mm,and 7.52 ± 0.05 mm,showing significant difference from the theoretical value (6mm,6mm and 7 mm).The average centre of the femoral tunnel was located at 26.4 ± 4.8％ of the femoral length and at 30.1 ± 5.6％ of the femoral height.Conclusion In this modified ACL reconstruction,a minor-diameter drill is used to drill the femoral tunnel and then expand it to oval-shaped tunnel with the raspatory,The graft was matched well with the bony tunnel intraoperatively.The three-dimensional CT shows that the femoral tunnels are well located within the anatomical ACL footprint,and its entrance is closer to the natural state.
ABSTRACT
Objective To analyze the volume and position of the gross tumor volumes (GTV) in primary esophageal cancer based on contrast-enhanced three-dimensional (3D),four-dimensional (4D) and cone beam (CB) computed tomography (CT).Methods A total of thirty-four patients underwent 3D-CT and 4D-CT simulation scans for computer treatment plan and contrast-enhanced CBCT scans were conducted prior to the first treatment.GTV3D,GTV4D50,internal GTVMIP (IGTVMIP) and internal GTVCBCT (IGTVCBCT) were delineated on 3D-CT,4D-CT50 (the end expiratory phase),4D-CTMIP (the maximum intensity projection),and CBCT datasets,respectively.The IGTV10 was defined as 10 respiratory phases GTVs in 4D-CT.To evaluate the difference in position,volume and the volumes encompassed characteristic.Results The significant difference was observed in the volumes [IGTV10 ＞ (IGTVCBCT or IGTVMIP) ＞ (GTV3D or GTV4D50)] regardless of the tumor location.Regarding IGTV10 as the standard volume,the underestimations or overestimations between IGTV10 and IGTVCBCT were larger than that of between IGTV10 and JGTVMIP (t =-8.294--3.192,P ＜ 0.05).However,there was no significant difference between the areas of IGTV10 which excluded in IGTVCBCT and IGTV3D (P ＞ 0.05).The GTV4D50/ IGTVCBCT ratio for upper esophageal tumors was negatively correlated to motion vector (r =-0.756,P ＜ 0.05).The centroid coordinates of IGTVCBCT in AP direction were significantly different from the test volumes (GTV3D,GTV4D50,IGTVMIP and IGTV10) (t =-3.559--2.435,P ＜ 0.05).The IGTV10/IGTVCBCT ratio was positively correlated to motion vector (r =0.695,P ＜ 0.05) for middle esophageal tumors.The centroid coordinates of IGTVCBCT were significantly different IGTV10 (t =2.201,P ＜0.05) in AP direction.For distal esophageal tumors,the significant difference was observed in the centroid coordinate between IGTVcBcT and IGTVMIP (t =-2.365,P ＜ 0.05) in LR direction.The percentage of IGTV10 excluded the IGTVcBcT were significantly correlated to the motion vector (r =0.540,0.678,P ＜ 0.05) for both middle and distal esophageal tumors.The mean MI value of IGTVCBCT to the other four test volumes ranged from 0.65 to 0.72.Conclusions CBCT has much motion information than 3D-CT but less than IGTV10.CBCT was similar to MIP images based on respiration motion.However,the target motion information encompassed in CBCT and MIP images cannot be exchanged to each other.
ABSTRACT
PURPOSE: To analyze the location of the femoral tunnel by three-dimensional computed tomography (3D CT) of the lateral condyle in patients who underwent arthroscopic single-bundle anterior cruciate ligament (ACL) reconstruction, performed using a modified transtibial technique, and to compare the results with data from the literature. MATERIALS AND METHODS: Seventeen patients with ACL lesions underwent modified transtibial ACL reconstruction. Postoperatively, 3D CT examinations were performed and the images were analyzed by the quadrant system described by Bernard and Hertel to define the femoral tunnel coordinates. RESULTS: The mean value of femoral tunnel location coordinates was 37.1±5.9 in the horizontal plane and 23.9±7.5 in the vertical plane. Compared with other studies using the transtibial or transportal technique, femoral positioning was improved in the vertical plane. The outside-in technique provided the best results both in the vertical and horizontal planes. CONCLUSIONS: The modified transtibial technique was not effective for systematically anatomic femoral tunnel positioning; however, it was relatively better than the conventional transtibial technique.
Subject(s)
Humans , Anterior Cruciate Ligament Reconstruction , Anterior Cruciate Ligament , KneeABSTRACT
PURPOSE: The purpose of this study was to compare the geometry and position of the femoral tunnel between the anteromedial portal (AMP) and outside-in (OI) techniques after anatomic single-bundle anterior cruciate ligament (ACL) reconstruction. MATERIALS AND METHODS: We evaluated 82 patients undergoing single-bundle ACL reconstruction with hamstring autografts using either the AMP (n=40) or OI (n=42) technique. The locations of the tunnel apertures were assessed by postoperative 3-dimensional computed tomography imaging. The femoral graft bending angle, femoral tunnel aperture shape, femoral tunnel length, and posterior wall breakage were also measured. RESULTS: The mean femoral tunnel position parallel to the Blumensaat line was more caudally positioned in the AMP group than in the OI group (p=0.025) The mean femoral graft angle in the OI group (99.6°±7.1°) was significantly more acute than that of the AMP group (108.9°±10.2°, p<0.001). The mean height/width ratio of the AMP group (1.21±0.20) was significantly more ellipsoidal than that of the OI group (1.07±0.09, p<0.001). CONCLUSIONS: The mean femoral tunnel position was significantly shallower in the AMP technique than in the OI technique. The OI technique might be more disadvantageous than the AMP technique in terms of the more acute bending angle.
Subject(s)
Humans , Anterior Cruciate Ligament Reconstruction , Anterior Cruciate Ligament , Autografts , Knee , TransplantsABSTRACT
PURPOSE: There remains uncertain whether to fix or not an ulnar styloid fracture acommpanied by distal radius fracture. Fixation might be required in cases of the fracture involving a fovea of ulnar head, an attachment site of deep triangular fibrocartilage, which is thought to be important to distal radioulnar joint stability. We analyzed a fovea involvement of an accompanied ulnar styloid fracture in patients with distal radius fracture by simple radiograph and three-dimensional computed tomography (3D CT). METHODS: We retrospectively reviewed 168 patients who underwent surgery with volar locking plate for distal radius fracture in our hospital from January 2005 to March 2015 and evaluated a fovea involvement of ulnar head by simple radiographs and 3D CT respectively, and compared. RESULTS: On simple X-ray, 64 cases (38%) were ulnar styloid fovea fractures; however, 21 cases of these revealed non-fovea fractures by 3D CT. And 7 out of 104 cases determined as non-fovea fracture by simple radiographs were diagnosed as fovea fractures by 3D CT. Sensitivity, specificity and accuracy of evaluation by simple radiograph were 86%, 82% and 83% respectively, when compared with those of 3D CT based evaluation. CONCLUSION: Accuracy of evaluating an accompanied ulnar styloid fovea fracture in patients with distal radius fracture by simple radiograph, when compared with 3D CT, was 83%; therefore, we recommend using the 3D CT based evaluation instead of simple radiograph based one for determination of fovea involvement of ulnar head.
Subject(s)
Humans , Head , Joints , Radiography , Radius Fractures , Retrospective Studies , Sensitivity and Specificity , Triangular FibrocartilageABSTRACT
Objective:To evaluate the vomer development of cleft palate patients.Methods:38 patients over 1 4 years(averaged 23.4 years)of age with cleft palate and 76 controls of normal people(aged 22.8 year on average)were included.The 3D computed tomo-graphy reconstruction images of the bony nasal septum were measured.The development of the vomer was evaluated by comparing the L1 (the length of the lower edge of the vomer),L2 (the length from nasal spine to the point of the sella)and S (the approximate area of vomer)among deferent groups.Results:The L1 ,L2,and S of cleft palate patients were smaller than those of the controls(P <0. 05).Compared with the postoperative cleft cases,the S and L2 of preoperative cases were bigger(P <0.05).Conclusion:The vomer development is adversely affected by cleft palate.Not only the vomer-palate fusion is lower,but also the sutura between vomer and na-sal septum cartilage and ethmoid bone are short.And the latter is greatly influenced by surgical trauma.
ABSTRACT
BACKGROUND: Age-related changes have been studied for lower and middle facial bones. Although the forehead comprises one-third of the facial area, no studies have investigated age-related changes in the upper part of the face or forehead. The purpose of this study was to use three-dimensional computed tomography (3D CT) to investigate age-related changes in the frontal bone. METHODS: A retrospective review was performed for patients who underwent 3D CT scan of facial bones. Patients were divided by gender and age (20 to 40 years, 41 to 60 years, and above 60 years). The frontal bone curvature was evaluated by the length of frontal bone and by two frontal bone angles in relation to the Frankfurt horizon. RESULTS: In both genders, aging was associated with increasing lower slope length. In elderly men (>60 years), the upper slope angle was significantly higher when compared to younger male subjects. Women demonstrated similar age-related changes, but the differences were only statistically significant for the middle and older age groups. CONCLUSION: This study demonstrates quantifiable age-related changes in the frontal bone. These findings contribute to the understanding of age-related changes of the facial soft tissues. The mean measurements in each age group can be used as a reference when planning forehead reconstruction.
Subject(s)
Aged , Female , Humans , Male , Aging , Facial Bones , Forehead , Frontal Bone , Retrospective Studies , Tomography, X-Ray ComputedABSTRACT
Objective Identification of anatomic structures are essential for totally thoracoscopic anatomic pulmonary segmentectomies, however sometimes the procedure are difficulty.This study was to assess whether three-dimensional computed tomography angiography(3D-CTA) could contribute to the preoperative arrangement of thoracoscopic complex segmentectomy.Methods Between September 2012 and August 2014, 29 patients were performed thoracoscopic complex segmentectomies under the guidance of preoperative 3D-CTA.The segmentectomies pattern were based on the nodules' diameter, location,and pathology.The targeted vessels and bronchus were marked in preoperative simulated segmentectomies.Results Of the 29 cases, 9 right upper lobe segmentectomies, 13 left upper segmentectomies, and 7 bibasilar segmentectomies were achieved, among which 6 subsegmentectomies were also inclued.The mean lesion diameter, operative time and intraoperative blood loss were(1.35 ± 0.80) cm, (190.53 ± 50.83) min, and (26.90 ± 32.24) ml respectively.Under the guidance of preoperative 3D-CTA , 8(27.5％) nodules were detected accurately, moreover 2(6.9％) aberrant arteries and 1 (3.4％) aberrant bronchus were observed.According to the marked vessels and bronchus preoperatively, 27 (93.1％) arteries, 25 (86.2％)veins,and 29(100％) bronchus were identified and dissected in the operation.Three cases converted to unplanned segmentectomies.No serious complications or death occurred.Conclusion 3D-CTA is an effective tool to enhance security and efficiency in thoracoscopic complex anatomical segmentectomy.
ABSTRACT
PURPOSE: The purpose of this study is to determine correlation between femoral tunnel angle in the coronal plane on a simple radiograph and femoral tunnel location in the sagittal plane on three-dimensional computed tomography (3D-CT). MATERIALS AND METHODS: The subjects included 42 patients who underwent 3D-CT after the operation out of 70 cases of anterior cruciate ligament reconstruction using quadriceps tendon-patelllar bone autograft from April, 2009 to June, 2011. Measurement of the femoral tunnel angle was based on the anatomical axis of the femur in antero-posterior (AP) and Rosenberg views; femoral tunnel location was described as a proportional percentage on the medial surface of the lateral femoral condyle in the 3D-CT image; then the correlation between femoral tunnel angle and femoral tunnel location was analyzed retrospectively. RESULTS: Femoral tunnel angle was 41.5degrees+/-6.8degrees (range: 29.7degrees-53.9degrees) on AP radiographs, and 34.9degrees+/-6.9degrees (range: 23.8degrees-46.5degrees) on Rosenberg views. The femoral tunnel was located 36.9%+/-11.3% from posterior, and 38.1%+/-6.5% from proximal on the 3D-CT image. On plain AP radiographs, femoral tunnel angle and femoral tunnel location showed negative correlation (p<0.001, rho=-0.498), and, in comparison with Rosenberg view, they showed negative correlation (p=0.006, rho=-0.416). Twenty three patients (53.5%) had femoral tunnel in the anatomical location. Their femoral tunnel angle on AP radiographs was 43.3degrees+/-6.1degrees, while the femoral tunnel angle of patients who had femoral tunnel in non-anatomical locations was 38.4degrees+/-6.4degrees (p=0.004). In the Rosenberg picture, similar difference was observed between the two groups (p=0.012). CONCLUSION: On AP radiographs and Rosenberg views, femoral tunnel angle showed significant correlation with the femoral tunnel location on the 3D-CT image, and the group who had femoral tunnel location in the anatomical range showed a relatively higher femoral tunnel angle.