ABSTRACT
How to raise the quality of life of discharged patients with moderate or severe craniocerebral trauma, how to improve their social adaptive ability and reduce occurrence of complications constitute key researches in neurosurgery care. Using two-dimension code plus WeChat friends for continuing care of such patients, the hospital has significantly improved the functional state, activity of daily living, complications and family care ability, contributing to better outcomes of such patients care.
ABSTRACT
The study is to establish the two-dimension HPLC fingerprints of Dihuang (Rehmannia glutinosa), by HPLC-PDA and HPLC-ELSD methods. The separations were performed on Waters Atlantis®T3（4.6 mm× 250 mm，5 μm）and Welch Ultimate®Hilic-NH₂（4.6 mm× 250 mm，5 μm）columns with the gradient elution of acetonitrile-0.01% phosphoric acid and acetonitrile-water, respectively. The chromatographic display wavelength for PDA detector was set at 203 nm. For HPLC-ELSD, the nebulizer was set as cooling mode, the drift tube temperature was set at 60 °C and the gas pressure was 35.0 psi. Based on similarity evaluation system for chromatographic fingerprint of traditional Chinese medicine, 26 and 10 chromatographic peaks were determined as common components for HPLC-PDA and HPLC-ELSD fingerprints, respectively. Chemometrics analyses, such as similarity analysis; cluster analysis and principal component analysis, were performed on the common peak areas in two-dimension fingerprints for 41 batches of Dihuang from multiple sources. The results showed that the HPLC-PDA fingerprint could distinguish dried rehmannia root between different sources, and HPLC-ELSD fingerprint could differentiate dried rehmannia root from prepared rehmannia root. The two-dimension fingerprints were established with advantages of a good degree of separation, abundant chemical information and multi-components identified including two nucleosides (adenosine and uridine)，four iridoid glycosides (catalpa alcohol，rehmaionoside D，rehmaionoside A and leonuride)，two phenylethanoid glycosides (acteoside and cistanoside A) and nine sugars. The method is simple and practical, which could be used for the identification and quality assessment for Dihuang.
ABSTRACT
Objective To compare the two-dimensional (2D) and three-dimensional (3D) shear wave elastography (SWE) technology in the diagnosis of early stage breast cancer.Methods 84 patients (94 breast lesions) with breast disease confirmed by pathological examination were enrolled from December 2014 to December 2016.All patients underwent 2D and 3D color Doppler ultrasound and the relevant SWE examinations.The optimal maximum and mean elastic modulus of 2D and 3D SWE for diagnosing the benign and malignant breast lesions were obtained by the receiver operating characteristic curve (ROC).Based on the results of pathological examinations,the sensitivity,specificity and accuracy of 2D SWE and 3D SWE in benign and malignant breast lesions diagnosis were evaluated and compared.Results The optimal maximum and mean elastic modulus of 2D SWE for diagnosing the benign and malignant breast lesions were 98.82 kPa and 43.88 kPa respectively,while the corresponding modulus of 3D SWE were 102.54 kPa and 53.87 kPa.The sensitivity of 2D SWE and 3D SWE in breast cancer diagnosis was 89.5％ and 86.3％ respectively,and the difference was not statistically significant (P＞0.05).The specificity and the accuracy of 2D SWE in breast cancer diagnosis were 95.3％ and 92.7％ respectively,which was significant higher than 83.9％ and 85.1％ of 3D SWE,and the differences were statistically significant (all P＜O.05).Conclusions The efficiency of 2D SWE examination is significantly higher than the 3D SWE in benign and malignant breast lesions diagnosis,which can provide a reliable diagnostic basis and is worthy for clinical application.
ABSTRACT
Aimed at the importance and current situation of hospital medical equipment management, the paper has analyzed the method of application and advantages of two dimension code technology and intelligent terminal in the management of medical equipment. And the two dimension code conversion software, which was developed by using C++ language compiler software and medical equipment management system, could achieve two dimension code information conversion and label production of medical equipment for instruction, maintenance, meterage and scraping and other information. And the intelligent terminal couldbe used to obtain information in real time, and it could combine with the existed one dimensional code to achieve informationization management for medical equipment, and then gradually replace one dimensional code. Through discussed the advantages of two dimension code and compared with the traditional model, the results indicated that this technology could provide a new direction in developmental trends and application prospect, and enhance the management level for dynamic information, and solve the problems of inconvenience in updating information.
ABSTRACT
Objective:To assess the changes of myocardial biomechanical parametres of left ventricle of the patients with non-Hodgkin lymphoma (NHL)after anthracycline (ANTH)treatment by using two dimension speckle tracking imaging (2D-STI),and to study the value of 2D-STI in evaluating and monitoring the early cardiac dysfunction of the NHL patients induced by ANTH treatment.Methods:A total of 37 hospital patients who were firstly diagnosed as NHL (ANTH chemotherapy group)and 20 healthy volunteers (normal control group)were selected.The global longitudinal strain (GLS),global radial strain (GRS),global circumferential strain (GCS) and left ventricle twist (LVtw)of the subjects in two groups were detected before chemotherapy and 1,2,3 weeks after chemotherapy with 2D-STI;the GLS×LVtw was calculated.Results:There were no significant differences in the general clinical parameters of the subjects between normal control group and ANTH chemotherapy group before chemotherapy (P >0.05);the values of GLS,GRS and GCS of the patients in ANTH chemotherapy group after ANTH chemotherapy were decreased than those in normal control group and before ANTH chemotherapy (P <0.05),and GLS had the most obvious change.The GLS, GRS, GCS and GLS × LVtw of the patients after 3 cycles of chemotherapy in ANTH chemotherapy group were decreased (P > 0.05 ). Four patients meet the diagnostic criteria of cardiac toxicity in the couse of chemotherapy.The sensitivity was 94%,the specificity was 66.7%,and the maximal Youden index was 0.667 when the △ GLS × LVtw =-64.53% ×°was used as the cut-off point in predicting the occurrence of myocardial toxicity.Conclusion:2D-STI can detect the early changes of biomechanical parameters of left ventricular myocardium with highly sensitive in predicting early myocardial toxicity and early cardiac dysfunction caused by ANTH chemotherapy.It may be an effective way to predict the early myocardial toxicity of ANTH chemotherapy in the future.
ABSTRACT
Objective To analyze territorial and global longitudinal layer-specific strain of left ventricle by two-dimensional speckle tracking imaging (2D-STI) in patients with suspected non-ST-elevation acute coronary syndrome (NSTE-ACS) and to explore the value of layer-specific strain parameters for prediction of significant coronary artery stenosis. Methods Seventy-five patients with suspected NSTE-ACS in People′s Hosptial of Subei from September 2016 to January 2017 were enrolled and all patients underwent coronary arteriography (CAG). Among them, there were 24 subjects in control group (coronary artery without stenosis or stenosis rate <50%) and 51 subjects in coronary atherosclerotic heart disease group (coronary heart disease, CHD). According to whether coronary artery occlusion, the CHD group was divided into coronary stenosis group (32 subjects) and coronary occlusion group (19 subjects). Using EchoPAC software, two-dimensional dynamic images were analyzed to obtain left ventricle 18-segment systolic longitudinal layer-specific strain and to calculate the territorial longitudinal strain (TLS) of endocadium, mid-myocardium and epicardium (TLSendo, TLSmid, TLSepi) and left ventricle global longitudinal strain (GLS) of endocadium, mid-myocardium and epicardium (GLSendo, GLSmid, GLSepi). The differences of left ventricle territorial and global longitudinal layer-specific strain parameters among 3 groups were compared by one-way analysis of variance and the differences between two groups were compared by LSD-t test. The receiver operating characteristic (ROC) curve of each parameter was constructed to predict significant coronary stenosis by using the results of CAG as the gold standard. Results Compared with control group and coronary stenosis group, TLSendo, TLSmid, TLSepi and GLSendo, GLSmid, GLSepi all decreased in patients with coronary occlusion, and the differences were statistically significant (coronary occlusion group vs. control group: t values were -5.819, -5.049, -4.845, -5.955, -5.036 and -4.724, respectively, P values were all less than 0.01;coronary occlusion group vs.coronary stenosis group:t values were-2.983,-3.059, -2.903, -2.989, -3.192 and -3.387, respectively, P values were all less than 0.01). And compared with control group, only TLSendo and GLSendo decreased in patients with coronary stenosis, and the differences were statistically significant (t values were -3.981 and -4.164, respectively, P values were all less than 0.01). TLSendo, TLSmid, TLSepi and GLSendo, GLSmid, GLSepi showed a gradient decrease in all 3 groups, but only in the control group the comparison between two of the three layers showed statistically significant differences(TLSepi vs. TLSendo,GLSepi vs. GLSendo:t values were both-10.083,P values were all less than 0.01;TLSepi vs.TLSmid,GLSepi vs.GLSmid:t values were both-4.559,P values were all less than 0.01;TLSmid vs.TLSendo,GLSmid vs.GLSendo:t values were both-5.549,P values were all less than 0.01). The absolute differences between endocardial and epicardial TLS and GLS (?TLS and?GLS) decreased gradually from the control group, to coronary stenosis group and to coronary occlusion group,and the differences were statistically significant(coronary occlusion group vs.control group:t values were 6.915 and 7.489, respectively, P values were all less than 0.01; coronary stenosis group vs. control group: t values were 4.923 and 7.202, respectively, P values were all less than 0.01; ?TLS of patients in the coronary occlusion group vs.coronary stenosis group:t value was 2.250,P value was less than 0.05),which reflected a pronounced decrease in endocardial function. By ROC curve analysis, GLSendo and TLSendo showed the highest area under the curve in predicting significant coronary artery stenosis, which were better than strain parameters of mid-myocardium, epicardium and the entire wall thickness of the myocardium. Conclusions Left ventricle showed systolic dysfunction in all three layers in suspected NSTE-ACS patients with CHD, especially the endocardium. The longitudinal layer-specific strain parameters by 2D-STI can be used for quantitative evaluation of the territorial and global systolic dysfunction differences of left ventricle in all layers in suspected NSTE-ACS patients with CHD, which can also be used for prediction of significant coronary artery stenosis.
ABSTRACT
Objective To improve medical equipment archive management informatization by the involvement of two-dimension code technology.Methods A piece of two-dimension code software was designed and then interfaced with medical equipment management system.Some two-dimension code labels were manufactured for registration,operation,maintenance,repair and metrology of medical equipment,and then stuck at the appointed positions of medical equipment.The two-dimension codes were read out by intelligent terminals such as cell phone,which was combined with one-dimension code for medical equipment management.Results The two-dimension codes produced by the software were updated simultaneously with medical equipment archive,and the intelligent terminals such as cell phone scanned and decoded the acquired information.Conclusion Two-dimension code technology provides new storage medium for medical equipment archive and will replace the existing one-dimension code eventually,and the storage medium is stored at the same place as medical equipment to eliminate the need for manual input.
ABSTRACT
Objective To identify the differential proteomic expressions between the liver tissues of male and female mice, and investigate the mechanisms underlying gender differences in liver diseases. Methods Two-dimensional fluorescence difference gel electrophoresis (2D-DIGE) and matrix-assisted laser desorption/ionization time of flight mass spectrometry ( MALDI-TOF-MS) were used to identify the differentially expressed proteins in the liver tissues of male and female C57BL/6J mice. The differentially expressed proteins were validated by Western blot and further analyzed by bioinformatics, including Gene Ontology (GO) analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG). Results Among the auto-detected 1767 protein spots by 2D-DIGE, 325 protein spots were differentially expressed (|ratio|≥1. 5, P< 0. 05) between the liver tissues of male and female mice, in which 78 spots were randomly selected for MALDI-TOF-MS identification and finally 48 distinct proteins were obtained. Compared with females, 14 and 34 proteins were up-or down-regulated in males, respectively. Among them, 6 differentially expressed proteins were validated by Western blot which confirmed the reliability of 2D-DIGE results. GO analysis showed that the differentially expressed proteins in the liver tissues of male and female mice are associated to various cellular component, molecular function and biological process. 6 pathways were significantly different between the liver tissues of males and females depending on KEGG analysis. Conclusions The proteomic data and related analysis of the liver tissues of C57BL/6J mice offer crucial clues for elucidating the underlying mechanisms of different gender effects on liver diseases.
ABSTRACT
Objective To improve medical equipment archive management informatization by the involvement of two-dimension code technology.Methods A piece of two-dimension code software was designed and then interfaced with medical equipment management system.Some two-dimension code labels were manufactured for registration,operation,maintenance,repair and metrology of medical equipment,and then stuck at the appointed positions of medical equipment.The two-dimension codes were read out by intelligent terminals such as cell phone,which was combined with one-dimension code for medical equipment management.Results The two-dimension codes produced by the software were updated simultaneously with medical equipment archive,and the intelligent terminals such as cell phone scanned and decoded the acquired information.Conclusion Two-dimension code technology provides new storage medium for medical equipment archive and will replace the existing one-dimension code eventually,and the storage medium is stored at the same place as medical equipment to eliminate the need for manual input.
ABSTRACT
Objective To identify the differential proteomic expressions between the liver tissues of male and female mice, and investigate the mechanisms underlying gender differences in liver diseases. Methods Two-dimensional fluorescence difference gel electrophoresis (2D-DIGE) and matrix-assisted laser desorption/ionization time of flight mass spectrometry ( MALDI-TOF-MS) were used to identify the differentially expressed proteins in the liver tissues of male and female C57BL/6J mice. The differentially expressed proteins were validated by Western blot and further analyzed by bioinformatics, including Gene Ontology (GO) analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG). Results Among the auto-detected 1767 protein spots by 2D-DIGE, 325 protein spots were differentially expressed (|ratio|≥1. 5, P< 0. 05) between the liver tissues of male and female mice, in which 78 spots were randomly selected for MALDI-TOF-MS identification and finally 48 distinct proteins were obtained. Compared with females, 14 and 34 proteins were up-or down-regulated in males, respectively. Among them, 6 differentially expressed proteins were validated by Western blot which confirmed the reliability of 2D-DIGE results. GO analysis showed that the differentially expressed proteins in the liver tissues of male and female mice are associated to various cellular component, molecular function and biological process. 6 pathways were significantly different between the liver tissues of males and females depending on KEGG analysis. Conclusions The proteomic data and related analysis of the liver tissues of C57BL/6J mice offer crucial clues for elucidating the underlying mechanisms of different gender effects on liver diseases.
ABSTRACT
Objective: The Fourier transform infrared spectroscopy (FT-IR) and two-dimension IR correlation infrared spectroscopy (2D-IR) were used for the identification of Paeoniae Radix Alba and Paeoniae Radix Rubraand their alcohol extracts. Methods: The FT-IR spectra method and 2D-IR correlation spectra method were used. Results: The structural information of samples indicated that Paeoniae Radix Alba and Paeoniae Radix Rubra contained a large amount of calcium oxalate and starch, since some characteristic absorption peaks of the calcium oxalate could be observed; And some characteristic absorption peaks in the range of 950-1 200 cm-1 of the starch can be observed, but their shape and location revealed minor differences. In the secondary derivative infrared spectra (SD-IR), both Paeoniae Radix Alba and Paeoniae Radix Rubra can be observed with the characteristic absorption peaks which in 518/517, 989 cm-1 and so on. Besides, these peaks at 989, 1 015, 1 052, 1 078, 1 105, and 1 161 cm-1 of Paeoniae Radix Rubra, almost of them which are single peak, were stronger than Paeoniae Radix Alba's and the same peaks in Paeoniae Radix Alba were jagged peaks, showing that the difference were related to the contents and structure of starch in Paeoniae Radix Alba and Paeoniae Radix Rubra. The characteristic absorption peaks of the peoniflorin which arouse at 1 716, 1 451, 1 347, 1 277, and 714 cm-1 in the FT-IR spectra of their alcohol extracts can be found. Moreover, the shape and intensity of the peaks were more distinct in the secondary derivative IR spectra of the different parts. For example, in the range of 900-980 cm-1, Paeoniae Radix Alba presented two groups of peaks: 935, 919 cm-1 (strong) and 962, 949 cm-1 (weak), while Paeoniae Radix Rubraonly presented one group of peaks: 941, 920 cm-1 (middle), showing that the difference was related to the content and structure of glucoside in Paeoniae Radix Alba and Paeoniae Radix Rubra. In the 2D-IR spectra, both had five auto-peaks at 887, 968, 1 008, 1 190, and 1 305 cm-1, which were the auto-peaks of glucoside, but the strongest auto-peak of Paeoniae Radix Alba was at 1 190 cm-1 and that of Paeoniae Radix Rubra's was at 968 cm-1. The spectra testified the glucoside compounds in Paeoniae Radix Alba and Paeoniae Radix Rubra were different. Conclusion: A lot of information of Paeoniae Radix Alba and Paeoniae Radix Rubra can be provided by FT-IR spectra method and 2D-IR correlation spectra method which can testify that the content and structure of substance in Paeoniae Radix Alba and Paeoniae Radix Rubra were different and can be used to analyze and distinguish Paeoniae Radix Alba and Paeoniae Radix Rubrapreliminarily which can make a good foundation for further research.
ABSTRACT
Objective To detect the molecular characteristics of the serum samples of rats suffered from sudden unexpected death of acute myocardial ischemia (experimental group) and death caused by air embolism (control group) applied by ATR-FTIR, and to discuss the forensic signiifcance of identiifcation of causes of death by sudden unexpected death of acute myocardial ischemia by two-dimension infrared spectroscopy. Methods Adult male SD rats were randomly divided into SCD group and DCAE group. The serum samples were analyzed by ATR-FTIR. The similarity coefifcient of spectra between two groups was analyzed by OMNIC software. The spectra with higher signal-noise ratio were obtained and used to build two-dimension spectra model by Matlab 2010a software. Results The peak shapes, positions and intensities of the spectra were extremely similar between two groups, and the similarity coefifcient reached 99.78%. Meanwhile, the similarity coefifcient of second derivative spectra decreased to 98.62% between two groups. Moreover, on the two-dimension spectra model, the component differences were present at about 1 625cm-1, 1 550cm-1, 1 080cm-1 and 860cm-1, and the number of auto-peaks was different, which suggested that the evident differences were related to the molecular contents of protein, glycogen, nuclear acid, and so on. Conclusion It is hard to differentiate the molecular differences of serum samples of rats between SCD and DACE based on one-dimension spectra. However, two-dimension infrared spectra could intuitively and effectively relfect the molecular differences, and it would apply to determining the cause of death in forensic science.
ABSTRACT
Objective:Now the mechanical ventilation has become the essential emergency or therapy equipment in the all sizes of hospitals. However with the widely application of ventilators, they are still the kind of high risk of medical instruments. In order to reduce various equipment failures, an overall management strategy based on traceability of two-dimension code is constructed in this article, which will provide a new direction for medical equipment management.Methods: Using the popular application of WiFi network and creating the only identified two-dimension code, the overall management strategy is established for the ventilators.Results: The centralized and decentralized management model is adopted in the preservation of ventilators. And all the operators of ventilators will be supported technology service about equipment failures and setting parameters by the respiratory department and engineering department. In addition to this, the two departments should organize the staff to learn the operation of ventilators in the hospital. All of those compose the structure of overall management.Conclusion: With the management of this method, the efficiency of ventilators is improved, and the rate of machine failures is dropped. The difficulty about technology service caused by space can be solved in time. Finally, the professional ability of the staff in hospital will be improved with the communication among the different departments.
ABSTRACT
A two_dimensional HPLC method was developed for the determination of methotrexat ( MTX ) in human plasma. The samples were treated with trichloroacetate for sedimentation and high speed centrifugation, and the obtained supernatant was taken for analysis. The analytes in sample were separated on the first dimension column (ASTON C8 100 mm × 4. 6 mm, 5μm), and trapped on the middle column (ASTON SCX 20 mm × 4. 6 mm, 5 μm) using valve_switching technique for purification and storage. Finally, the trapped analytes were transferred to the second_dimension column (SAC C8 100 mm × 4. 6 mm, 5μm) for the second separation. The mobile phase used for the first dimension was 10 mmol/L ammonium acetate_acetonitrile(9∶1, V/V, pH=3. 8) with a flow rate of 1 mL/min and the mobile phase used for middle column was 10 mmol/L phosphoric acid ( pH=3 . 0 ) . The mobile phase used in second_dimension was a mixed solution of 50 mmol/L ammonium acetate and acetonitrile (87∶10, V/V, pH=5. 2). UV detection was carried out at 306 nm and completed in 4 min. The calibration curve showed a linearity range from 0. 0879 to 5. 154 μmol/L (r=0. 99998). The LOQ was 0. 005 μmol/L. The intra_and inter_day precisions were lower than 1. 5% and 1. 8%, respectively. The relative recovery and the absolute recovery were 99. 1% - 101. 2% and 85. 67%-86. 35%, respectively. The assay is simple, accurate, reproducible, and suitable for the therapeutic drug monitoring of MTX in the hospital and the study on the pharmacokinetics of MTX.
ABSTRACT
Objective To design leaf patterns for Multileaf Collimator(MLC)routine quality assurance(OA)with a 2D diode array.Methods According to the detector distribution characteristic of the 2D diode array and basillg on the"picket fence"pattern,design the"stepwise"pattern.For each diode involving MLC QA,a calibration curve of relative output versus leaf positioning error was measured through delivering a set of patterns with different intentionally introduced positioning errors.When this proposed technique was delivered,the referenced patterns were exposed,and the calibration curves were used as a mean to quantitative determination of the leaf possible positioning errors through the detector readings.Results Compared with the"picket fence"pattern,the"stepwise"pattern not only had a high detecting efficiency,but also increased the dosimetric sensidvity to leaf positioning error.A 1 mm Ieaf positioni.error corresponds to a dose variation of 25% for the"stepwise"pattern,while for the"picket fence"pattern the same positioning error just causes a 17% dose vailation.Conclusions The new"stepwise"pattern is more efficient to be carried out,and more sensitive to sub-millimeter changes of leaf positioning.
ABSTRACT
Objective To explore the related protein which lead to rheumatoid arthritis (RA) and to find different proteins associated with active RA by comparing the expression levels of proteins in the peripheral blood mononuclear cells (PBMCs) of healthy individuals to patients with rheumatoid arthritis using a proteomics approach. Methods Samples of peripheral blood were collected from 9 patients diagnosed as active RA and 9 healthy individuals. PBMCs were isolated from blood using lymphoeytes separation medium. The total protein was extracted from the peripheral blood mononuclear cells. The total protein from either RA patients or normal controls was prepared by means of immobilized pH gradient based on two-dimensional gel eleetrophoresis. After Coomassie brilliant blue G250 staining, gel-image analysis was performed by using PDQuest.The differentially expressed proteins were identified by matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALD I-TOF-MS). Then APOA-I was validated by RT-PCR. Results 2-DE patterns of PBMCs from controls and RA patients were presented. The results showed that the average number of protein spots was 556 and 579 respectively, and the corresponding average matching rate was 89.4％ and 88.5％ respectively. Gel-image analysis revealed that there were 23 differential protein spots. Fourteen of total 18 differential protein spots were successfully identified by MALD I-TOF-MS, of which 8 proteins were upregulated such as actin beta, fibrinogen beta chain, ApoA-I ; and 6 proteins such as peroxiredoxin-2, glu-tathione S-transferase omega 1 were down-regulated when compared with controls. The result of ApoA-I by RT-PCR was consistent with the proteomics results. Conclusion Some differentially expressed proteins are observed in the PBMCs of patients with rheumatoid arthritis, which may play a potential role in the pathogenesis of RA.
ABSTRACT
To summarize the application of proteomics to modernization research of Chinese materia medica (CMM) and offer the reference for modernization of CMM and new medicine preparation exploitation. Based on the references and our project group studies in proteomic of drug biosynthesis pathway and metabolization;the main content,technology strategies and important application of the proteomics were introduced significantly;and the further development of protemics was analyzed. The proteomics will become one of absolutely necessary tackles in the modernization research of CMM.
ABSTRACT
Objective To design a new method to verify the position of multileaf collimator(MLC)leaf using a two-dimensional ion chamber array(2D-array).Methods 2D-array of PTW T10018 Seven29~(TM) was used to calibrate the accuracy of MLC leaf position of Elekta Precise accelerator.The edge function of the leaf position of MLC was measured and used as the reference value.The precision of MLC leaf was then evaluated through comparing the measured and reference values.Results The accuracy of MLC leaf position was found within?0.1 mm.Conclusion This method of verifying the accuracy of multileaf collimator leaf position is easy,simple and reliable