Principles Of Ultrasound Technology In Medical Imaging Of Non Ionization Images

The X-ray tube is one of the most important components in any X-ray system. In the beginning, physicists and physicians used gas ion tubes. The so-called Coolidge tube applied a high vacuum and is still used today. Medical examinations have required continuously improved designs of X-ray tubes (smaller focal spots at a higher output). The principle of the Goetze line focus is still applied in any diagnostic X-ray tube. Different anode materials and the rotating anode contributed to an increased output and reduced exposure time. Bearings needed special attention. Spiral groove bearings are the most advanced design today. The heat storage capacity of the anode and the tube housing assembly influences examination time and patient throughput. Cardiac imaging required less motion blurring in cine film images and increasing radiation exposure in interventional procedures called for measures to reduce dose. Protection against radiation and electric shock has always been a concern of design engineers. Focal spot sizes dedicated to specific applications and heat management within the total tube housing assembly will be future issues. Even with the event of ultrasound and MR technology, X-ray procedures will still be applied for diagnostic and interventional purposes.

Principles & Functions Of Conventional & Digital X-Rays Imaging Systems In Diagnosis

Digital radiography (DR) is an advanced form of x-ray inspection which produces a digital radiographic image instantly on a computer. This technique uses x-ray sensitive plates to capture data during object examination, which is immediately transferred to a computer without the use of an intermediate cassette. The incident x-ray radiation is converted into an equivalent electric charge and then to a digital image through a detector sensor. Compared to other imaging devices, flat panel detectors, also known as digital detector arrays (DDAs) provide high quality digital images. They can have better signal-to-noise ratio and improved dynamic range, which, in turn, provides high sensitivity for radiographic applications. Flat panel detectors work on two different approaches, namely, indirect conversion and direct conversion. Indirect conversion flat panel detectors have a scintillator layer which converts x-ray photons to photons of visible light and utilise a photo diode matrix of amorphous silicon to subsequently convert the light photons into an electrical charge. This charge is proportional to the number and energy of x-ray photons interacting with the detector pixel and therefore the amount and density of material that has absorbed the x-rays. Direct conversion flat panel detectors use a photo conductor like amorphous selenium (a-Se) or Cadmium telluride (Cd-Te) on a multi-micro electrode plate, providing the greatest sharpness and resolution. The information on both types of detectors is read by thin film transistors. In the direct conversion process, when x-ray photons impact over the photo conductor, like amorphous Selenium, they are directly converted to electronic signals which are amplified and digitised. As there is no scintillator, lateral spread of light photons is absent here, ensuring a sharper image. This differentiates it from indirect construction.

PRINCIPLES OF X-RAY TECHNOLOGY IN MEDICAL IMAGING AND IMPROVEMENT OF RADIOLOGICAL IMAGES (1st Part)

The X-ray tube is one of the most important components in any X-ray system. In the beginning, physicists and physicians used gas ion tubes. The so-called Coolidge tube applied a high vacuum and is still used today. Medical examinations have required continuously improved designs of X-ray tubes (smaller focal spots at a higher output). The principle of the Goetze line focus is still applied in any diagnostic X-ray tube. Different anode materials and the rotating anode contributed to an increased output and reduced exposure time. Bearings needed special attention. Spiral groove bearings are the most advanced design today. The heat storage capacity of the anode and the tube housing assembly influences examination time and patient throughput. Cardiac imaging required less motion blurring in cine film images and increasing radiation exposure in interventional procedures calling for measures to reduce dose. Protection against radiation and electric shock has always been a concern of design engineers. Focal spot sizes dedicated to specific applications and heat management within the total tube housing assembly will be future issues. Even in the event of ultrasound and MR technology, X-ray procedures will still be applied for diagnostic and interventional purposes.

PRINCIPLES OF MAGNETIC RESONANCE TECHNOLOGY IN MEDICAL IMAGING OF NON IONIZATION IMAGES

The X-ray tube is one of the most important components in any X-ray system. In the beginning, physicists and physicians used gas ion tubes. The so-called Coolidge tube applied a high vacuum and is still used today. Medical examinations have required continuously improved designs of X-ray tubes (smaller focal spots at a higher output). The principle of the Goetze line focus is still applied in any diagnostic X-ray tube. Different anode materials and the rotating anode contributed to an increased output and reduced exposure time. Bearings needed special attention. Spiral groove bearings are the most advanced design today. The heat storage capacity of the anode and the tube housing assembly influences examination time and patient throughput. Cardiac imaging required less motion blurring in cine film images and increasing radiation exposure in interventional procedures called for measures to reduce dose. Protection against radiation and electric shock has always been a concern of design engineers. Focal spot sizes dedicated to specific applications and heat management within the total tube housing assembly will be future issues. Even with the event of ultrasound and MR technology, X-ray procedures will still be applied for diagnostic and interventional purposes.

The application and troubleshooting of Lightspeed 16 row CT / 中国医学装备

Objective: Though mastering the Lightspeed 16 row CT line fault diagnosis and repair method to enhance the level of expertise and resolve the troubles more quickly. Methods:Through the outside training and learning, to master 16 rows of CT system structure and working principle and summarize the experiences and some methods of 16 rows of CT. Results:The use of these methods can be solved Lightspeed type 16 row CT line fault quickly and increase the using period. Conclusion:The use of these methods repair type Lightspeed 16 row CT quite effective, reducing equipment downtime, and prolongs the service life of equipment, reduce operating costs in hospital and make a little contribution.

Effect of CT scanning parameters on CT number / 中华放射医学与防护杂志

Objective To study the effects on tissue CT number caused by scan protocols.Methods The phantom was repeatedly scanned in different protocols by changing only one of parameters,such as X-ray tube voltage,mAs and recon kernel,while other parameters were ketp unchanged.The CT number of different materials in phantom were measured and analyzed.Results The CT numbers of tissues changed remarkably with the tube voltage and had different relativity for different tissues.The CT numbers had positive correlation with kV for such maierials as polyethyle,lexan,perspex,but for teflon the correlation was negative.The mAs and recon kernel had no effects on CT number.Conclusions The CT number of tissue changes with scanning X-ray tube voltage,so the setting of scan parameters should be taken into account in image diagnosis and radiotherapy.

Quality-control testing,evaluation and application of X-ray machine's major parameters / 医疗卫生装备

This paper introduces the testing methods with respect to the major parameters (X-ray tube voltage & current,exposure time,exposure volume)of X-ray machine as well as the testing results evaluation and application. It is proved that quality control of x-ray machine is an important content and technical means as to guarantee quality for radiology department of hospital.