Influence of different surface treatments on bond strength of a Self-Adhesive resin cement to CAD-CAM materials / Influencia de los diferentes tratamientos superficiales en la unión del cemento resinoso autoadhesivo a los materiales CAD-CAM

To evaluate the shear bond strength (SBS) of self-adhesive resin cement when used with two different computer-aided design (CAD)-computer-aided manufacturing (CAM) materials after various surface treatments. Nanoceramic resin Lava Ultimate (LU) and feldspathic ceramic Vita Mark II (VM) CAD-CAM block samples were prepared with 1.5-mm thickness, and a total of 90 samples were obtained (N=90), with five samples of each block. The samples were divided into the following five groups according to the surface treatments (n=9): group 1, untreated (control); group 2,5% hydrofluoric acid etching; group 3, Er: YAG laser irradiation; group 4, tribochemical silica coating (Cojet); and group 5, air-abrasion with Al2O3. After silane application, resin cement was applied on a transparent matrix (diameter, 3mm; height, 2mm) on the blocks. SBS was determined using a universal testing device at a crosshead speed of 1mm/min. Two-way analysis of variance (ANOVA) and Tukey's post hoc tests were used to analyze the SBS values. LU showed the highest SBS value in group 4. The average SBS values in groups 3 and were found to be lower than that in the control group (p<0.05). When VM was examined, while all surface treatments increased the SBS values significantly, the highest SBS value was observed in group 4 (p<0.05). This study revealed that all surface treatments used negatively affected the bond strength values of self-adhesive resin cement to LU, except for Cojet application. The SBS values of resin cement with VM increased in all surface treatment application groups.

Evaluar la resistencia de unión al corte (SBS) del cemento de resina autoadhesivo cuando se utiliza con dos materiales diferentes de diseño asistido por computadora (CAD) y fabricación asistida por computadora (CAM) después de varios tratamientos superficiales. Se prepararon muestras de bloques CAD-CAM de resina Lava Ultimate (LU) y cerámica feldespática Vita Mark II (VM) con un espesor de 1,5mm, y se obtuvieron un total de 90 muestras (N=90), con cinco muestras de cada bloque. Las muestras se dividieron en los siguientes cinco grupos según los tratamientos superficiales (n=9): grupo 1, sin tratar (control); grupo 2, grabado con ácido fluorhídrico al 5%; grupo 3, irradiación con láser Er: YAG; grupo 4, recubrimiento triboquímico de sílice (Cojet); y grupo 5, aire-abrasión con Al2O3. Después de la aplicación de silano, se aplicó cemento de resina sobre una matriz transparente (diámetro, 3mm; altura, 2mm) sobre los bloques. La SBS se determinó usando un dispositivo de prueba universal a una velocidad de cruceta de 1mm/min. Se utilizaron análisis de varianza bidireccional (ANOVA) y pruebas post hoc de Tukey para analizar los valores de SBS. LU mostró el valor más alto de SBS en el grupo 4. Los valores promedio de SBS en los grupos 3 y fueron más bajos que en el grupo de control (p<0,05). Cuando se examinó VM, mientras que todos los tratamientos superficiales aumentaron significativamente los valores de SBS, el valor más alto de SBS se observó en el grupo 4 (p<0,05). Este estudio reveló que todos los tratamientos de superficie utilizados afectaron negativamente los valores de resistencia de la unión del cemento de resina autoadhesivo a LU, a excepción de la aplicación Cojet. Los valores de SBS del cemento de resina con VM aumentaron en todos los grupos de aplicación de tratamiento de superficie.

Capsulotomía Nd-Yag Láser en Pseudofáquicos con OCP

Una de las causas de la disminución de la visión es la catarata. El tratamiento es la extracción del cristalino opaco con reemplazo por un lente intraocular (LIO). La opacidad de cápsula posterior (OCP) es una complicación frecuente a largo plazo. Las modificaciones en el diseño del LIO tanto del material y la forma tienen mayor importancia para prevenir la OCP. Como tratamiento está la capsulotomía neodimio YAG láser. Objetivo: identificar la OCP relacionado con el tipo de LIO implantado en pacientes pseudofáquicos en la FBO, entre el periodo de marzo del 2019 hasta febrero del 2022. Métodos: estudio observacional, tipo analítico, subtipo cohorte histórica, retro- prospectiva y longitudinal, con enfoque de análisis estadístico de tipo cuantitativo. Resultados: predominó el género femenino con un 60 % y un 40 % representaba al masculino; un 60,3 % del total tenían entre 65 a 80 años. La OCP en los 3 tipos de lentes intraoculares (acrílico y PMMA) ocasionó una disminución en la agudeza visual: el 37 %, predominó, por el LIO hidrofóbico, 36 % por el LIO PMMA y destacamos que el 27 % fue por el LIO hidrofílico. La incidencia de OCP a 5 años fue del 32 %. No se registró ningún efecto adverso en nuestro estudio. Conclusiones: la OCP provoca una baja de agudeza visual leve a moderada en los 3 tipos de LIOs; con un mínimo predominio de BAV leve para el tipo de LIO hidrofóbico comparado con el hidrofílico. Además después de la capsulotomía un gran porcentaje tiene entre 20/20 a 20/25 de AV mejor corregida.

One of the causes of decreased vision is cataract. Treatment is removal of the cloudy lens with replacement by an intraocular lens (IOL). Posterior capsule opacity (PCO) is a common long-term complication. Modifications in the design of the IOL both in terms of material and shape are of greater importance in preventing PCO. Treatment is neodymium YAG laser capsulotomy. Objective: to identify the PCO related to the type of IOL implanted in pseudophakic patients in the FBO, from March 2019 to February 2022. Methods: observational study, analytical type, historical cohort subtype, retro-prospective and longitudinal, with a quantitative statistical analysis approach. Results: the female gender predominated with 60% and 41% represented the male; 60.3% of the total was between 65 and 80 years old. PCO in the 3 types of intraocular lenses (acrylic and PMMA) caused a decrease in visual acuity: 37%, predominated, due to the hydrophobic IOL, 36% due to the PMMA IOL and we highlight that 27% was due to the hydrophilic IOL. The incidence of PCO at 5 years was 32%. No adverse effect was recorded in our study. Conclusion: PCO causes mild to moderate visual acuity loss in all 3 types of IOLs; with a minimal predominance of mild AVB for the hydrophobic IOL type compared to the hydrophilic one. In addition, after capsulotomy, a large percentage has between 20/20 and 20/25 better corrected visual acuity.

The penetration effect of ultrasound and Er:YAG laser irrigation activation techniques on dentine of infected human root canals / 口腔疾病防治

Objective@#This ex vivo study evaluated the effect of ultrasound and Er:YAG laser irrigation activation techniques on the penetration of sodium hypochlorite solution into infected human root canal dentin, providing a reference for clinical infection control of infected root canals.@*Methods @#Thirty-six cases of infected root canals were collected and randomly divided into three groups according to the irrigation technique: 12 cases in the conventional syringe irrigation (CSI) group, 12 cases in the passive ultrasonic irrigation (PUI) group, 12 cases in the Er:YAG laser and photon-induced photoacoustic streaming (PIPS) group and 36 cases of clean root canals (12 cases in the CSI group, 12 cases in the PUI group, 12 cases in the PIPS group). All of the selected root canals were straight root canals of posterior teeth. After standardizing the root length, all canals were subjected to instrumentation and dynamic irrigation. 2% methylene blue solution was used to visualize the penetration of the irrigant. EXAKT cutting and grinding equipment was used to take transverse sections of 100-150 μm at the coronal, middle and apical thirds of the root canals. The data (maximum penetration depth, average penetration depth, and penetration percentage) were observed under a light microscope to evaluate the effect of dye penetration. @*Results @# With the three irrigation techniques, the maximum penetration depth, average penetration depth and penetration percentage of the infected root canals were significantly lower than those of clean root canals in the full length of the root canal (P<0.05). The penetration percentage, average penetration depth and maximum penetration depth of the PIPS group were significantly higher than those of the CSI group in the coronal, middle and apical thirds of the infected root canal, respectively (P<0.05). There was no significant difference in the maximum penetration depth, average penetration depth or penetration percentage between the PUI and CSI groups (P>0.05). There was also no significant difference in the maximum penetration depth, average penetration depth or penetration percentage between the PIPS and PUI groups (P>0.05). @*Conclusion @# The dentine permeability of infected root canals was weaker than that of clean root canals. Er:YAG laser-assisted irrigation activation technology could significantly improve the penetration of sodium hypochlorite solution into infected dentin, but passive ultrasonic irrigation did not significantly improve the penetration.

Clinical effects of 532 nm picosecond and nanosecond Nd∶YAG laser in treatment of early seborrheic keratosis / 中华医学美学美容杂志

Objective:To compare the efficacy and adverse reactions of picosecond and nanosecond Nd∶YAG laser 532 nm in the treatment of seborrheic keratosis.Methods:A total of 30 patients with seborrheic keratosis were enrolled in this study. The rash size was more than 1-2 cm. Half of them were treated with picosecond laser and the other half with nanosecond Q-switched Nd∶YAG laser by wavelength of 532 nm. The treatment effect and adverse reactions were evaluated by observing the area and the disappearance of pigment. The patients were followed up for 3 months after treatment.Results:The total effective rate was 73.33% in the experimental group and 53.33% in the control group, with no significant difference between the two groups ( P>0.05), but the pain score, satisfactory score, scab shedding time and the incidence of pigmentation in the experimental group were lower than those in the control group, and the differences were statistically significant ( P<0.05). Conclusions:The 532 nm picosecond laser has a higher efficiency in treating seborrheic keratosis than 532 nm Q-switched Nd∶YAG, but it has no statistical significance. However, the self satisfaction is higher than that of the control group; the pain score, scab shedding time and the incidence of pigmentation are lower than those of the control group, with statistical significance. Therefore, picosecond 532 nm laser treatment of early seborrheic keratosis is worthy of clinical promotion.

Photoelectric therapy for rosacea / 中华皮肤科杂志

Rosacea is a chronic inflammatory dermatosis mostly occurring on the central face, and its pathogenesis is still unclear. Currently, drug treatment is the first-line therapy for rosacea. In recent years, photoelectric therapy has showed a favorable therapeutic effect on rosacea by selective photothermolysis. This review summarizes latest advances in photoelectric therapy for rosacea.

Effect of dual wavelength laser in the treatment of chronic periodontitis and the influence of cytokines in gingival crevicular fluid / 中国医师进修杂志

Objective:To investigate the clinical efficacy and prognostic factors of Neodymium doped: Yttrium Aluminum Garnet (Nd:YAG ) laser combined with Erbium:Yttrium Aluminum Garnet (Er:YAG) laser assisted subgingival scaling root planing (SRP) in the treatment of periodontitis.Methods:A prospective research method was adopted. A total of 66 patients with periodontitis treated in Hebei Chest Hospital from August 2018 to August 2020 were selected and divided into experimental group and control group according to the random number table method, with 33 cases in each group. The control group was treated with SRP, and the experimental group received Er:YAG laser curettage combined with root surface leveling on the basis of SRP, and irradiated the periodontal pocket with Nd:YAG laser. The changes of periodontal clinical indicators and cytokine levels in gingival crevicular fluid were examined before treatment, 4 weeks and 12 weeks after treatment. The patients were divided into PD<3 mm group and PD ≥ 3 mm group according to the probing depth (PD) of periodontal pocket after 12 weeks of treatment, the clinical data of the two groups were compared and analyzed, and the Logistic regression analysis was performed to analyze the risk factors affecting the prognosis of patients with periodontitis after laser treatment.Results:After 4 and 12 weeks of treatment, the PD, clinical attachment loss (CAL), sulcus bleeding index (SBI) and plaque index (PLI) of the two groups were significantly lower than those before treatment ( P<0.05), and the PD, CAL, SBI and PLI in experimental group were significantly lower than those in control group, after 4 weeks of treatment: (3.36 ± 0.21) mm vs. (3.91 ± 0.39) mm, (4.14 ± 0.67) mm vs. (4.75 ± 0.73) mm, (1.83 ± 0.20) scores vs. (2.58 ± 0.17) scores, (1.29 ± 0.24) scores vs. (1.61 ± 0.52) scores; after 12 weeks of treatment: (3.04 ± 0.28) mm vs. (3.66 ± 0.54) mm, (3.91 ± 0.47) mm vs. (4.68 ± 0.66) mm, (0.88 ± 0.06) scores vs. (1.35 ± 0.14) scores, (1.05 ± 0.31) scores vs. (1.57 ± 0.56) scores, the differences were statistically significant ( P<0.05). After 12 weeks of treatment, the levels of interleukin-6 (IL-6), interleukin-8 (IL-8), tumor necrosis factor-α (TNF-α), matrix metalloproteinase-8 (MMP-8) and interleukin-1β (IL-1β) in gingival crevicular fluid in experimental group were significantly decreased compared with those in control group: (2.95 ± 0.19) μg/L vs. (4.32 ± 0.84) μg/L, (2.63 ± 0.82) μg/L vs. (3.58 ± 0.51) μg/L, (12.42 ± 1.19) μg/L vs. (13.26 ± 0.68) μg/L, (4.15 ± 1.12) ng/L vs. (5.36 ± 0.42) ng/L, (2.65 ± 0.08) ng/L vs. (4.12 ± 0.19) ng/L, the differences were statistically significant ( P<0.05), while the level of transforming growth factor-β (TGF-β) was significantly increased compared with that in control group: (51.35 ± 8.95) ng/L vs. (44.90 ± 5.84) ng/L, and the differences between the groups were statistically significant ( P<0.05). Logistic regression analysis showed that the clinical indexes PD, SBI, PLI, IL-6, IL-8, TNF- α, MMP-8, IL-1β and crown root ratio of gingival crevicular fluid were all the risk factors for prognosis of periodontitis treated with dual wavelength laser ( P<0.05). Conclusions:Nd:YAG laser combined with Er:YAG laser assisted SRP can obtain good curative effect in the treatment of periodontitis. Periodontal clinical indexes PD, SBI, PLI, gingival crevicular fluid IL-6, IL-8 and TNF-α, MMP-8, IL-1β level and crown root ratio were independent risk factors for the prognosis of periodontitis treated with dual wavelength laser.

Comparison of four methods that remove calcium hydroxide from root canals / 口腔疾病防治

Objective@# To compare the efficiency of four methods that remove calcium hydroxide in root canals and to guide clinical practice. @* Methods @# Sixty-five isolated mandibular single root canal premolars were collected. After crown cutting and root canal preparation, a tooth was randomly selected as the blank control group, and the remaining 64 teeth were equally divided into Groups A and B (n = 32). Group A was injected with water-soluble calcium hydroxide, and Group B was injected with oil-soluble calcium hydroxide. After 2 weeks of drug sealing, Groups A and B were randomly divided into 4 groups (n = 8), including the lateral opening syringe group, sonic vibration group, ultrasonic group, and Er: YAG laser group. Before and after calcium hydroxide removal, the samples were scanned by cone-beam CT, and the data were imported into Mimics for 3D reconstruction. The root canal was divided into the following segments: superior root segment, middle and apical, and the calcium hydroxide volume of each segment of the root canal was calculated. The volumes of calcium hydroxide before and after removal were V1 and V2, respectively, with a clearance rate = (V1-V2)/V1×100%. Three-factor ANOVA was used for statistical analysis. After Groups A and B were reconstructed, the apical region with residual calcium hydroxide was selected, and the blank control was observed by scanning electron microscopy (SEM). @*Results @# Two types of calcium hydroxide could not be completely removed by the four flushing methods. The clearance rate of water-soluble calcium hydroxide was higher than that of oil-soluble calcium hydroxide (P<0.001). Among the three segments of the root canal, the clearance rate of the apical segment was lower (P<0.05). The Er: YAG laser treatment group showed the highest removal efficiency of two kinds of calcium hydroxide, which was higher than that of the other groups, especially in apical of the root. Compared with the sonic wave washing group and the syringe washing group, the ultrasonic wave washing group exhibited significant advantages (P<0.05). The clearance rate of the sonic wave washing group was higher in the oily calcium hydroxide root middle group than in the syringe washing group (P<0.05). SEM showed that the two kinds of calcium hydroxide could not be completely removed, but the residual rate of oil-soluble calcium hydroxide was large.@*Conclusion @# Both types of calcium hydroxide could not be completely removed, and compared to water-soluble calcium hydroxide, oil-soluble calcium hydroxide was more difficult to remove. Among the four cleaning methods, Er:YAG laser swing washing showed the higher cleaning efficiency.

YAG laser vitreolysis for floaters / 国际眼科杂志(Guoji Yanke Zazhi)

Floaters are entopic phenomenon created by vitreous opacities. Some researchers term it as “symptomatic vitreous turbidity”, which usually refers to primary type in clinic. With the increasing prevalence and aging of myopia worldwide, vitreous floaters are becoming increasingly prevalent in clinics but receiving less attention. Floaters can impair patients' vision and quality of life due to their discomfort and disorientation. A few patients become intolerable and express a strong desire for treatment. YAG laser vitreolysis for floaters has garnered considerable attention in recent years. Although some doctors still have concerns about its efficacy and safety, a handful of studies have found some beneficial effects in recent years. The author has gained expertise in clinical practice in recent years. In this review, we talk about what causes floaters and how to classify them. We also talk about the clinical indications, how YAG laser ablation works, and whether or not it is safe.

The removal of three kinds of occlusal veneers by Er: Yag laser / 华西口腔医学杂志

OBJECTIVES@#This study aimed to remove occlusal veneers of varied thicknesses and compositions by Er:Yag laser in vitro and analyze the interfacial microstructure between veneers and tooth that irradiated by laser, by which experimental evidence could be provided to support the non-invasive removal of occlusal veneerby laser.@*METHODS@#Fresh mandibular premolars extracted for orthodontic requirements were collected for tooth preparation. Three kinds of ceramic materials (Vita Suprinity, Vita Mark Ⅱ, and Upcera Hyramic) were selected to fabricate occlusal veneer with different thicknesses (1.0, 1.5, and 2.0 mm). One week later, Er:Yag laser (2.5 W and 3.5 W) was used to irradiate and remove the occlusal veneer and recorded the timespan. After the removal operation, the micro-morphologies of samples were examined by scanning electron microscope.@*RESULTS@#Upcera Hyramic veneer failed to be removed (>20 min); the operation span at 2.5 W, Vita Suprinity (96.0 s±16.0 s) was longer than Vita MarkⅡ(84.5 s±19.5 s) in the 1.0 mm group (P<0.05), and Vita Suprinity (246.5 s±13.5 s) was longer than Vita MarkⅡ(170.0 s±14.0 s) in the 1.5 mm group (P<0.05). At 3.5 W, Vita Suprinity (381.0 s±24.0 s) was longer than Vita MarkⅡ(341.5 s±26.5 s) in the 2.0 mm group.@*CONCLUSIONS@#Increasing laser power could shorten the operation span and facilitate the removal of occlusal veneers with the same thickness and composition. The occlusal veneer was sustained when insufficient laser power was applied. With the same laser power and ceramic thickness, laser penetration could interfere with the integral of the ceramic structure when the laser interacted with the bonding layer. With the same ceramic composition and laser power, the operation span and laser power increased with the thickness of the occlusal veneer. However, the laser was incapable of removing occlusal resin veneer directly.

Effect of laser-assisted retrograde cavity preparation on push-out-bond-strength of mineral trioxide aggregate and calcium-enriched-mixture-cement / Efeito de preparo cavitário retrógrado assistido por laser na força de união de cimento de agregado trióxido mineral e cimento enriquecido com cálcio

Objective: This study aimed to determine the push-out-bond-strength(PBS) of mineral trioxide aggregate (BIOMTA+) and calcium-enriched-mixture-cement (CEM) in retrograde cavities prepared using Er: YAG laser and stainless-steel bur. Material and Methods: The root canals of 60 extracted single-rooted human teeth were prepared, filled and their apical portion of 3-mm were resected using a diamond bur and randomly divided into four groups according to technique of retrograde preparation and filling material as follows(n=15): Group1: bur/ BIOMTA+ ,Group2: bur/ CEM, Group3: Er:YAG laser/ BIOMTA+, Group4: Er:YAG laser/ CEM. PBS test were performed to specimens and failure modes were evaluated. The data were statistically analyzed with ANOVA, Post-Hoc Tukey and t tests (p< 0.05). Results: CEM was exhibited higher than bond strength compared to BIOMTA+ in retrograde cavity prepared using laser (p= 0.021) and BIOMTA+ in retrograde cavity prepared using bur was exhibited higher than bond strength compared to in retrograde cavities prepared using laser (p= 0.024). Failure modes were dominantly cohesive in all groups tested and one representative specimen each failure mode was examined in SEM and the general characteristics of the failure modes were confirmed. Conclusion: With in the limitations of the present study, when used CEM, Er: YAG laser-assisted retrograde cavity preparation positively affected the bond strength values compared to BIO MTA+. Considering its optimal adhesion, the calcium-enriched-mixture-cement (CEM) might be a good option as a filling material in retrograde cavities in clinical use. (AU)

Objetivo: O objetivo deste estudo foi determinar a força de união (PBS) de cimento de agregado trióxido mineral (BIO MTA+) e cimento enriquecido com cálcio (CEM) em preparos cavitários retrógrados realizados com: Laser Er-YAG e brocas de aço inoxidável. Material e Métodos: Canais radiculares de 60 dentes unirradiculares extraídos foram preparados, preenchidos e 3 mm de suas porções apicais foram ressecadas usando uma broca diamantada e divididos randomicamente em quatro grupos de acordo com a técnica de preparação retrógrada e o material de preenchimento (n=15): Grupo 1: Broca/BIO MTA+, Grupo 2: Broca/CEM, Grupo 3: Laser Er-YAG/BIO MTA+, Grupo 4: Laser Er-YAG/CEM. O teste de PBS foi realizado para as amostras e os modelos de falha foram avaliados. Os dados foram analisados estatisticamente pelos testes de ANOVA, Post-Hoc Tukey e testes t (p< 0.05). Resultados: CEM apresentou maior força de união que BIO MTA+ em cavidades retrógradas preparadas com laser (p= 0.021) e BIO MTA+ em cavidades retrógradas preparadas com brocas apresentou maior força de união quando comparado à cavidades retrógradas preparadas com laser (p= 0.024). Os modelos de falha foram predominantemente coesos em todos os grupos testados e um espécime representativo de cada modelo de falha foi examinado em MEV e as características gerais dos modelos de falha foram confirmadas. Conclusão: Com as limitações do presente estudo, quando usou-se CEM, o preparo de cavidades retrógradas através de Laser Er-YAG afetou positivamente os valores da força de união quando comparados com BIO MTA+. Considerando sua ótima adesão, o cimento enriquecido com cálcio (CEM) pode ser uma boa opção como um material de preenchimento em cavidades retrógradas no uso clínico.

Avaliação clínica de restaurações Classe V em cavidades tratadas com o laser de Er: YAG associado ao uso de sistemas adesivos autocondicionantes / Clinical evaluation of Class V restorations in cavities treated with Er: YAG laser associated with the use of self-etching adhesive systems

O objetivo deste estudo clínico, controlado, randomizado, cego e prospectivo foi de avaliar a efetividade clínica de restaurações em lesões não cariosas (cavidades Classe V) realizadas em superfícies dentais pré-tratadas ou não com laser de Er:YAG e utilizando dois sistemas adesivos autocondicionantes. Este estudo foi realizado com um total de 91 lesões e divididas em 4 grupos (n = 23) :G1(FL): Sem pré-tratamento e utilizando o adesiso FL-Bond II/Shofu; G2 (CF): sem pré-tratamento e utilizando o adesivo Clearfil SE Bond 2/Kuraray Noritake; G3 (Laser + FL): pré-tratamento associado ao uso do FL-Bond II/Shofu e G4 (Laser + CF): pré-tratamento associado ao uso do Clearfil SE Bond 2/Kuraray Noritake Os dentes avaliados foram os pré-molares de ambas as arcadas. A avaliação foi feita imediatamente após o tratamento e ao longo do tempo, em 3, 6 e 12 meses após a finalização da restauração. Para a avaliação da sensibilidade foi considerado a EVA (Escala Visual Analógica) e para a qualidade da restauração o método do USPHS modificado, considerando a avaliação de perda de retenção, integridade marginal, pigmentação marginal, presença de lesão de cárie em margem de restauração, vitalidade pulpar e sensibilidade pós-operatória. Os dados foram registrados em tabelas de frequência, e os escores transformados em postos para a aplicação do teste ANOVA. A significância estatística foi considerada para valores de p<0,05. Para os resultados da avaliação de sensibilidade houve uma diferença estatística significante da sensibilidade ao longo do tempo (p<0,001), sendo que essa diferença se deu a partir da avaliação T1 (48 horas) em todos os grupos. Em relação aos critérios avaliados no USPHS, foram encontrados variações estatísticas em alguns tópicos: Pigmentação marginal - G1 (FL) (p=0,041) e G2 ( Laser + FL) (p=0,009) e Integridade marginal G1(FL)( p=0,036). Os demais grupos e critérios não apresentaram variações estatísticas significantes.Pré-tratamentos com laser Er:YAG podem ser uma alternativa viável em restaurações adesivas do tipo classe V; no entanto, nenhum efeito sinérgico de ambos os tratamentos combinados foi observado.

The objective of this clinical, controlled, randomized, blinded and prospective study was to evaluate the clinical effectiveness of restorations in non-carious lesions (Class V cavities) performed on dental surfaces pre-treated or not with Er:YAG laser and using two adhesive systems self-conditioning. This study was carried out with a total of 91 lesions and divided into 4 groups (n = 23) :G1(FL): No pre-treatment and using the FL-Bond II/Shofu adhesive; G2 (CF): without pre-treatment and using Clearfil SE Bond 2/Kuraray Noritake adhesive; G3 (Laser + FL): pre-treatment associated with the use of FL-Bond II/Shofu and G4 (Laser + CF): pre-treatment associated with the use of Clearfil SE Bond 2/Kuraray Noritake The teeth evaluated were the premolars of both arcades. Assessment was performed immediately after treatment and over time, at 3, 6, and 12 months after completion of the restoration. The VAS (Visual Analogue Scale) was used for the sensitivity assessment and the modified USPHS method for the quality of the restoration, considering the assessment of loss of retention, marginal integrity, marginal pigmentation, presence of caries in the restoration margin. , pulp vitality and postoperative sensitivity. Data were recorded in frequency tables, and the scores were transformed into ranks for the application of the ANOVA test. Statistical significance was considered for values of p<0.05. For the results of the sensitivity evaluation, there was a statistically significant difference in sensitivity over time (p<0.001), and this difference occurred from the T1 evaluation (48 hours) in all groups. Regarding the criteria evaluated at the USPHS, statistical variations were found in some topics: Marginal pigmentation - G1 (FL) (p=0.041) and G2 (Laser + FL) (p=0.009) and Marginal integrity - G1(FL)( p =0.036). The other groups and criteria did not present significant statistical variations. Pretreatments with Er:YAG laser can be a viable alternative in class V adhesive restorations; however, no synergistic effect of both treatments combined was observed.

Erbium laser in the debonding of ceramics: a literature review / Laser de érbio na remoção de cerâmicas: uma revisão de literatura

Background: The debonding of crowns and ceramic veneers with laser is already a reality in the clinic. It presents benefits in comparison to traditional removal with the use of a rotating instrument; however, there is still no consolidated protocol and many professionals use it without the necessary scientific basis. Objective: The aim of this work was to perform a literature review on the debonding of indirect ceramic restorations using the Er:YAG and Er,Cr:YSGG lasers to provide clinical professionals and the scientific community a careful analysis, and also to guiding the use of irradiation at laser for such procedures. Methods: Bibliographic searches were performed in the following databases: Pubmed, Web of Science and Google Scholar. According to the inclusion criteria adopted, twenty-seven clinical and in vitro studies were selected in the period from 2007 to 2021. In the present work, the composition of the crowns and facets, as well as the types of cement and the laser irradiation protocols adopted in the selected studies is detailed. Conclusions: It was concluded that the use of erbium lasers for debonding of indirect ceramic restorations proved to be more selective and conservative when compared to removal with a rotary diamond instrument. Furthermore, it was shown to be in more efficient in debonding different types of ceramics. However, there are great variations in the "debonding" protocols, which emphasizes the need for further studies that seek to standardize the irradiation protocols considering the different clinical situations (AU)

Antecedentes: A remoção de coroas e facetas cerâmicas com laser já é uma realidade clínica e apresenta benefícios em relação à remoção tradicional com uso de instrumento rotatório diamantado; entretanto, ainda não existe um protocolo consolidado e muitos profissionais o utilizam sem o embasamento científico necessário. Objetivos: O objetivo deste trabalho foi realizar uma revisão da literatura sobre a remoção de restaurações cerâmicas indiretas utilizando os lasers Er:YAG e Er,Cr:YSGG para fornecer uma análise cuidadosa aos profissionais clínicos e à comunidade científica, além de orientar o uso da irradiação a laser para tal aplicação. Métodos: As buscas bibliográficas foram realizadas, nas seguintes bases de dados: Pubmed, Web of Science e Google Scholar. De acordo com os critérios de inclusão adotados, foram selecionados vinte e sete estudos clínicos e in vitro no período de 2007 a 2021. No presente trabalho, a composição das coroas e facetas, bem como os tipos de cimento e os protocolos de irradiação laser adotados nos estudos selecionados foram detalhados. Conclusão: Concluiu-se que o uso dos lasers de érbio para remoção de restaurações cerâmicas indiretas mostrou-se mais seletivo e conservador quando comparado à remoção com instrumento rotatório diamantado, além de ser eficiente na remoção de diferentes tipos de cerâmicas. No entanto, existem grandes variações nos protocolos de "debonding", o que enfatiza a necessidade de novos estudos que busquem uma padronização dos protocolos de irradiação considerando as diferentes situações clínicas.(AU)

Research progress on diagnosis and treatment of gingival pigmentation / 口腔疾病防治

@#Gingival pigmentation(GP) manifests as dark pigmentation spots, such as black or brown spots, in the gums. It is mostly caused by the deposition of melanin particles secreted by melanocytes on the gingival epithelium. The influencing factors may be divided into two categories, exogenous and endogenous. Exogenous factors include heavy metals, tattoos, smoking or drug use, and endogenous factors are related to certain diseases. The clinical grading of GP helps make a reasonable assessment of the necessity of treatment and prognosis. The Dummett-Gupta oral pigmentation index is a commonly used grading method, and the new grading method formed by combining the etiology and clinical manifestations described the patient’s situation more comprehensively. It is necessary to ask for a detailed medical history, complete examination, and correctly differentiate between physiological GP and GP caused by pathological state. Laser treatment is the currenttreatment with a better treatment effect and higher patient acceptance, and it is more comfortable and convenient, including diode laser, Er: YAG laser, and Nd: YAG laser, etc. This article summarizes the formation factors, clinical manifestations and treatment methods of GP to provide ideas for the clinical diagnosis and treatment of GP.

Research progress on the application of Er: YAG laser removing all-ceramic restorations / 口腔疾病防治

@#All-ceramic restorations are widely used in oral restoration because of their beauty and high strength. Glass ceramics and zirconia all-ceramic materials are the two most widely used all-ceramic materials in the clinic. However, when all-ceramic restorations need to be removed due to marginal microleakage and secondary caries, its high strength and high bonding strength greatly increase the difficulty of removal. In recent years, clinicians have tried to use Er: YAG lasers to remove all-ceramic restorations. The Er: YAG laser can be safely and efficiently applied to the removal of glass restorations, and it can also play a role in thinner zirconia restorations. Various factors, such as the material and thickness of the all-ceramic restoration, the type of cement, and the laser power, can affect the speed of removal of the Er: YAG laser. However, the current research is limited to case reports and in vitro studies, lacking systematic clinical research. The specific mechanism of Er: YAG laser removal of all-ceramic restorations and the influence of laser frequency, adhesive type, and abutment on the removal speed need to be further demonstrated by follow-up research.

Clinical effect observation of Nd: YAG laser combined with acyclovir in the treatment of herpes labialis / 口腔疾病防治

Objective@#To investigate the clinical efficacy of Nd: YAG laser combined with 3% acyclovir cream in the treatment of herpes labialis. @* Methods @# A total of 72 patients with herpes labialis were enrolled. According to the random number table method, the patients were divided into an observation group and a control group with 36 patients in the observation group and 36 patients in the control group. The Nd: YAG laser combined with 3% acyclovir cream was administered to the observation group, while 3% acyclovir cream was administered to the control group. The total effective rate, scab, scab removal, analgesic time, and quality of life were compared between the two groups.@*Results@# 7 days after treatment, the total effective rate of clinical treatment in the control group was 27 patients (75%), and that in the observation group was 34 patients (94.4%); the contrast difference was statistically significant (P < 0.05). Compared with those in the control group, the crusting, prolapse and analgesic time of the observation group were shorter, and the differences were statistically significant (P < 0.05). Compared with the control group, the observation group had higher quality of life scores, and there was a statistical significance (P < 0.05). @*Conclusion @#For patients with herpes labialis, using Nd: YAG laser combined with 3% acyclovir cream treatment can significantly improve the quality of life of patients and accelerate the speed of patient rehabilitation.

Efficacy of 2 940 nm Er∶YAG laser combined with electronic injection of collagen in treatment of striae gravidarum / 中华医学美学美容杂志

Objective:To assess the efficacy and security of 2 940 nm Er∶YAG laser combined with electronic injection of collagen in treatment of striae gravidarum.Methods:The symmetrical spots on both sides of abdomen of 21 subjects with striae gravidarum were divided into treatment and control groups by simple randomization method in the Department of Burn and Plastic Surgery, 903 Hospital from November 2017 to May 2019. The treatment group were treated with 2 940 nm Er∶YAG laser combined with electronic injection of collagen every 2 months for 3 sessions, and control group were received 2 940 nm Er∶YAG laser combined with electronic injection of physiological saline. The total effective rate, satisfaction, striae width, histopathology, and the adverse reaction were evaluated at 6 months after treatment.Results:A total of 19 subjects completed the whole trail. The clinical effective rate of the treatment group was 89.47% and the control group was 68.42%. In the treatment group, 11 cases were satisfied with and 6 cases were very satisfied with treatment outcome. In the treatment group, 8 cases were satisfied with and 3 cases were very satisfied with treatment outcome. The difference of total effective rate and satisfaction was statistically significant ( χ2 was 3.91 and 5.54, P was 0.045 and 0.019). The maximum width decreased by (1.53±0.97) mm on treatment side, and (1.37±1.01) mm on control side. The difference of striae width was statistically significant. No adverse effect was observed on both sides. Conclusions:The combination of the 2 940 nm Er∶YAG laser with electronic injection of collagen for treatment of striae gravidarum is a safe and effective approach for improving of striae gravidarum.

Efficacy of long-pulsed 1 064-nm Nd:YAG laser combined with a topical emulsion containing Camellia reticulata and Radix Notoginseng in the treatment of melasma / 中华皮肤科杂志

Objective:To evaluate the efficacy of long-pulsed 1 064-nm Nd:YAG laser combined with a topical emulsion containing Camellia reticulata and Radix Notoginseng in the treatment of melasma. Methods:A total of 80 patients with melasma were enrolled from Department of Dermatology, People′s Hospital of Ningxia Hui Autonomous Region from June 2019 to June 2020, and randomly and equally divided into control group and observation group by using a random number table: 40 patients in the control group were treated with long-pulsed 1 064-nm Nd:YAG laser once every 2 weeks for 6 sessions as a course of treatment; another 40 in the observation group were treated with the same laser therapy as the control group and a topical emulsion containing Camellia reticulata and Radix Notoginseng twice a day for 3 months as a course of treatment. Melasma area and severity index (MASI), clinical efficacy, patient satisfaction rate and safety were compared between the 2 groups before and/or after treatment. Results:After 4- and 8-week treatment, there was no significant difference in the MASI score between the observation group (14.57 ± 3.22 points, 10.00 ± 2.94 points, respectively) and control group (14.74 ± 3.11 points, 11.31 ± 3.00 points, respectively; both P>0.05). After 12-week treatment, the MASI score was significantly lower in the observation group (4.80 ± 2.78 points) than in the control group (7.07 ± 3.22 points, t = -3.38, P<0.01). After 3-month treatment, the response rate was significantly higher in the observation group (36 cases, 90%) than in the control group (31 cases, 77.5%; χ2 = 4.58, P < 0.001) ; however, there was no significant difference in the patient satisfaction rate between the observation group (87.5%) and control group (72.5%, χ2 = 7.26, P = 0.06). In addition, no significant difference in the occurrence of adverse reactions was observed between the observation group (5 cases, 12.5%) and control group (7 cases, 17.5%; P > 0.05) . Conclusion:Compared with the long-pulsed 1 064-nm Nd:YAG laser alone, the topical emulsion containing Camellia reticulata and Radix Notoginseng in combination with the long-pulsed 1 064-nm Nd:YAG laser is more effective for the treatment of melasma, with higher patient satisfaction and less adverse reactions.

Síndrome de contracción capsular bilateral / Bilateral capsule contraction syndrome

El síndrome de contracción capsular se describe como una reducción progresiva y acelerada del diámetro de la capsulorrexis y del saco capsular tras la extracción extracapsular del cristalino. Se reporta el caso de una paciente femenina, con antecedentes de miopía elevada, a quien se le realizó cirugía de catarata de ambos ojos sin complicaciones transquirúrgicas, y regresa con síndrome de contracción capsular bilateral al mes de operada. Se comenta la conducta seguida en ambos ojos(AU)

Capsule contraction syndrome is described as progressive, accelerated reduction in capsulorhexis and capsular bag diameter after extracapsular crystalline lens extraction. A case is presented of a female patient with a history of high myopia who underwent cataract surgery of both eyes without any intraoperative complication. One month after surgery the patient presents with bilateral capsule contraction syndrome. Comments are made on the clinical management of each eye(AU)

Randomized comparative study in the treatment of oral leucoplakia with laser and conventional surgery / Estudo comparativo randomizado no tratamento da leucoplasia oral com laser e cirurgia convencional

Objective: High-energy lasers are used as an alternative to surgical treatment of potentially malignant disorders in the oral cavity. The present article aims to make a prospective randomised comparative clinical assessment of the effect of laser surgery and conventional surgery in the treatment of oral leukoplakia (OL). Material and methods: In the study were included 89 patients with histologically confirmed oral leukoplakia lesions. Laser excision of the lesions using Er YAG laser was performed in 36 of the patients, while standard surgical excision was used in 53 of the cases. Following clinical assessment comparing the two treatment methods was conducted based on: pain, wound healing, infection and recurrence of the lesions. Results: A statistically significant difference between two groups according pain in the postoperative period was found. Patients treated with laser ablation experienced far less pain than those treated with surgical excision. The healing time was significantly faster in the group treated with Er YAG laser, and regarding the occurrence of postoperative infections, the results of the two methods did not differ significantly. Recurrence was observed earlier in the group treated with laser ablation, but the levels align over a longer period of time. Conclusion: Er YAG laser ablation is a contemporary method for the treatment of oral leukoplakia without dysplasia, providing similar success, compared to conventional surgical excision, with less postoperative discomfort for the patients. (AU)

Objetivo: Os lasers de alta potência são utilizados como alternativa ao tratamento cirúrgico de doenças potencialmente malignas da cavidade oral. O presente artigo tem como objetivo fazer uma avaliação clínica prospectiva e randomizada comparativa do efeito da cirurgia a laser e da cirurgia convencional no tratamento da leucoplasia oral (LO). Material e Métodos: No estudo foram incluídos 89 pacientes com lesões de leucoplasia oral confirmadas histologicamente. A excisão das lesões com laser Er YAG foi realizada em 36 dos pacientes, enquanto a excisão cirúrgica padrão foi utilizada em 53 dos casos. A avaliação clínica seguinte comparando os dois métodos de tratamento foi realizada com base em: dor, cicatrização da ferida, infecção e recorrência das lesões. Resultados: Foi encontrada diferença estatisticamente significante entre os dois grupos de acordo com a dor no pós-operatório. Os pacientes tratados com ablação a laser experimentaram muito menos dor do que aqueles tratados com excisão cirúrgica. O tempo de cicatrização foi significativamente mais rápido no grupo tratado com laser Er YAG e, em relação à ocorrência de infecções pós-operatórias, os resultados dos dois métodos não diferiram significativamente. A recorrência foi observada mais cedo no grupo tratado com ablação a laser, mas os níveis se alinham por um longo período de tempo. Conclusão: A ablação a laser Er YAG é um método contemporâneo para o tratamento da leucoplasia oral sem displasia, proporcionando sucesso semelhante ao da excisão cirúrgica convencional, com menor desconforto pós-operatório para os pacientes. (AU)

Dentinal tubule occlusion using Er:YAG Laser: an in vitro study

Abstract Objectives We analyzed the effects of the Er:YAG laser used with different parameters on dentinal tubule (DT) occlusion, intrapulpal temperature and pulp tissue morphology in order to determine the optimal parameters for treating dentin hypersensitivity. Methodology Dentin specimens prepared from 36 extracted human third molars were randomized into six groups according to the treatment method (n=6 each): control (A); Gluma desensitizer (B); and Er:YAG laser treatment at 0.5 W , 167 J/cm2 (50 mJ, 10 Hz) (C), 1 W , 334 J/cm2 (50 mJ, 20 Hz) (D), 2 W , 668 J/cm2 (100 mJ, 20 Hz) (E), and 4 W and 1336 J/cm2 (200 mJ, 20 Hz) (F). Treatment-induced morphological changes of the dentin surfaces were assessed using scanning electron microscopy (SEM) to find parameters showing optimal dentin tubule occluding efficacy. To further verify the safety of these parameters (0.5 W, 167 J/cm2), intrapulpal temperature changes were recorded during laser irradiation, and morphological alterations of the dental pulp tissue were observed with an upright microscope. Results Er:YAG laser irradiation at 0.5 W (167 J/cm2) were found to be superior in DT occlusion, with an exposure rate significantly lower than those in the other groups (P<0.05). Intrapulpal temperature changes induced by Er:YAG laser irradiation at 0.5 W (167 J/cm2) with (G) and without (H) water and air cooling were demonstrated to be below the threshold. Also, no significant morphological alterations of the pulp and odontoblasts were observed after irradiation. Conclusion Therefore, 0.5 W (167 J/cm2) is a suitable parameter for Er:YAG laser to occlude DTs, and it is safe to the pulp tissue.