Sobrevivência em fadiga de coroas bioinspiradas bilaminadas: estudo in vitro / Fatigue survival rate of bioinspired bilaminar crowns: in vitro study

O objetivo deste estudo foi avaliar o comportamento biomecânico através da resistência à fadiga e análise por elementos finitos de coroas bioinspiradas bilaminadas com infraestruturas modificadas na superfície vestibular (Estudo A) e utilizando diferentes materiais cerâmicos com módulos elásticos distintos (Estudo B). Para isso, foram confeccionados 90 preparos para coroa total em resina epóxi G10, sobre os quais foram preparadas coroas bioinspiradas de acordo com os seguintes grupos: Estudo A - IC (infraestrutura convencional), IME (infraestrutura modificada estratificada) e IMC (infraestrutura modificada cimentada), todas confeccionadas em dissilicato de lítio (infraestrutura) + porcelana (recobrimento); Estudo B ­ DL+LEU (dissilicato de lítio + leucita), LEU+DL (leucita + dissilicato de lítio), CH+DL (cerâmica híbrida + dissilicato de lítio) e CH+LEU (cerâmica híbrida + leucita). Para o Estudo A, todas as infraestruturas foram usinadas; os recobrimentos dos grupos IC e IME foram confeccionados através da estratificação, e os recobrimentos do grupo IMC foram usinados. Já para o Estudo B, todas as peças foram usinadas, de acordo com o material cerâmico de cada grupo. Em seguida, foi realizada a cimentação adesiva dos recobrimentos sobre as infraestruturas (a depender do grupo) e das coroas sobre os preparos utilizando cimento resinoso fotopolimerizável (Variolink Esthetic LC). Após a cimentação, os espécimes foram submetidos ao teste de fadiga cíclica (10.000 ciclos, 20Hz), e como desfecho foram considerados dois eventos, em que o primeiro foi a ocorrência de trinca e/ou lascamento (evento 1) e o segundo foi a falha catastrófica do conjunto (evento 2). Os valores de carga e número de ciclos para falha em que foram observados os eventos 1 e 2 foram utilizados para realizar a análise de sobrevivência de acordo com Kaplan-Meier e Log-Rank (Mantel-Cox; 95%). As marcas de fratura e o modo de falha das coroas foram avaliados e classificados por estereomicroscópio óptico e microscópio eletrônico de varredura. Por fim, foi realizada análise por elementos finitos (FEA) para ambos os estudos, a fim de avaliar a distribuição de tensões sobre as coroas e interface adesiva. Para o Estudo A, os resultados do teste de fadiga mostraram que, considerando o evento 1 (trinca/lascamento), os grupos IC e IMC apresentaram médias de carga fadiga estatisticamente significantes entre si (733,33 N e 913,33 N, respectivamente), enquanto o grupo IME apresentou média superior (1.020 N). O mesmo foi observado para o número de ciclos em fadiga para todos os grupos. Ao considerar o evento 2 (falha catastrófica), os três grupos apresentaram médias estatisticamente semelhantes entre si (~1.028 N). Os resultados de FEA mostraram que o grupo IC concentrou maior tensão de tração do que os grupos IME e IMC. Para o Estudo B, no teste de fadiga, o grupo DL+LEU apresentou a maior média de resistência à fadiga (evento 1: 913,33 N e evento 2: 1033,33 N), enquanto todas as outras combinações de materiais cerâmicos analisadas foram estatisticamente semelhantes entre si, considerando carga e número de ciclos. Com relação ao FEA, os grupos com cerâmica híbrida (CH+DL e CH+LEU) apresentaram menores picos de concentração de tensão na infraestrutura do que os grupos com cerâmicas vítreas (DL+LEU e LEU+DL), porém, em contrapartida, concentraram maior tensão na interface adesiva. Com isso, conclui-se que a utilização da infraestrutura modificada é uma alternativa viável e promissora para tratamentos reabilitadores, apresentando sobrevivência em fadiga e distribuição de tensões satisfatórias. Além disso, a combinação entre uma infraestrutura de dissilicato de lítio e recobrimento de cerâmica a base de leucita corresponde a melhor abordagem considerando a infraestrutura modificada.(AU)

The objective of this study was to evaluate the biomechanical behavior through fatigue resistance and finite element analysis of bilaminar bioinspired crowns with modified infrastructures on the buccal surface (Study A) and using different ceramic materials with different elastic moduli (Study B). For this, 90 preparations were made for a full crown in G10 epoxy resin, on which bioinspired crowns were prepared according to the following groups: Study A - CI (conventional infrastructure), SMI (stratified modified infrastructure) and CMI (cemented modified infrastructure ), all made of lithium disilicate (infrastructure) + porcelain (veneer); Study B ­ LD+LEU (lithium disilicate + leucite), LEU+LD (leucite + lithium disilicate), HC+LD (hybrid ceramic + lithium disilicate) and HC+LEU (hybrid ceramic + leucite). For Study A, all infrastructures were machined; the coverings of the CI and SMI groups were made through stratification technique, and the veneers of the SMI group were machined. For Study B, all pieces were machined, according to the ceramic material of each group. Then, the veneers were cemented into their infrastructures (depending on the group) and crowns were cemented into preparations using light-cured resin cement (Variolink Esthetic LC). After cementing, the specimens were subjected to the cyclic fatigue test (10,000 cycles, 20Hz), and as an outcome two events were considered: the occurrence of cracking and/or chipping (event 1) and catastrophic failure (event 2). The load (N) and number of cycles to failure in which events 1 and 2 were observed were used to perform the survival analysis according to Kaplan-Meier and Log-Rank (Mantel- Cox; 95%). The fracture marks and failure mode of the crowns were evaluated and classified by optical stereomicroscope and scanning electron microscope. Finally, finite element analysis (FEA) was performed for both studies in order to evaluate the stress distribution over the crowns and adhesive interface. For Study A, the results of the fatigue test showed that, considering event 1 (cracking/chipping), the CI and CMI groups presented average to failure that were statistically significant compared to each other (733.33 N and 913.33 N, respectively), while the SMI group showed higher averages (1,020 N). Same pattern was observed for the number of cycles under fatigue for both groups. When considering event 2 (catastrophic failure), the three groups presented statistically similar means (~1,028 N). The FEA results showed that the CI group concentrated greater tensile stress than the CMI and SMI groups. For Study B, in the fatigue test, the LC+LEU group presented the highest average fatigue resistance (event 1: 913.33 N and event 2: 1033.33 N), while all other combinations of ceramic materials analyzed were statistically similar to each other, considering load and number of cycles. Regarding FEA, the groups with hybrid ceramics (HC+LC and HC+LEU) showed lower stress concentration peaks in the infrastructure than the groups with glass ceramics (LC+LEU and LEU+LC), however, on the other hand, concentrated greater tension at the adhesive interface. With this, it is concluded that the use of modified infrastructure is a viable and promising alternative for oral rehabilitation treatments, presenting satisfactory fatigue survival and adequate stress distribution. Furthermore, the combination of a lithium disilicate infrastructure and a leucite-based ceramic coating corresponds to the best approach considering the modified infrastructure.(AU)

Anti-biofilm effectiveness of protocols for cleaning complete dentures in hospitalized patients: a randomized controlled trial

Abstract Denture biofilm acts as a potential reservoir for respiratory pathogens, considerably increasing the risk of lung infections, specifically aspiration pneumonia, mainly 48h after hospital admission. The establishment of a straightforward, affordable, and applicable hygiene protocol in a hospital environment for the effective control of denture biofilm can be particularly useful to prevent respiratory infections or reduce the course of established lung disease. Objectives To evaluate the anti-biofilm effectiveness of denture cleaning protocols in hospitalized patients. Methodology The maxillary complete dentures (MCDs) of 340 hospitalized participants were randomly cleaned once using one of the following 17 protocols (n=20): brushing with distilled water, toothpaste, or neutral liquid soap (controls); immersion in chemical solutions (1% sodium hypochlorite, alkaline peroxide, 0.12% or 2% chlorhexidine digluconate), or microwave irradiation (650 W for 3 min) combined or not with brushing. Before and after the application of the protocols, the biofilm of the intaglio surface of the MCDs was evaluated using two methods: denture biofilm coverage area (%) and microbiological quantitative cultures on blood agar and Sabouraud Dextrose Agar (CFU/mL). Data were subjected to the Wilcoxon and Kruskal-Wallis tests (α=0.05). Results All 17 protocols significantly reduced the percentage area of denture biofilm and microbial and fungal load (P<0.05). The highest percentage reductions in the area of denture biofilm were observed for 1% hypochlorite solution with or without brushing and for 2% chlorhexidine solution and microwave irradiation only in association with brushing (P<0.05). The greatest reductions in microbial and fungal load were found for the groups that used solutions of 2% chlorhexidine and 1% hypochlorite and microwave irradiation, regardless of the association with brushing (P<0.05). Conclusions A single immersion for 10 min in 1% sodium hypochlorite, even in the absence of brushing, proved to be a straightforward, rapid, low-cost, and effective protocol for cleaning the dentures of hospitalized patients.

Atividade antifúngica de nanofibras de policaprolactona/nistatina: estudo in vitro e in vivo / Antifungal activity of polycaprolactone/nystatin nanofibers: in vitro and in vivo study

Este estudo avaliou a eficácia in vitro e in vivo de mantas de nanofibras (NF) de policaprolactona (PCL) incorporadas com nistatina (NIS) no tratamento da estomatite protética (EP) em modelos animais. NF foram sintetizadas com diferentes concentrações de NIS, totalizando quatro soluções: PCL puro, PCL/NIS 0,045 g, PCL/NIS 0,090 g e PCL/NIS 0,225 g. A liberação da NIS foi analisada por espectroscopia Ultravioleta-Visível. A capacidade das mantas de inibirem o biofilme de Candida albicans, principal fator etiológico da EP, dividindo-se cinco grupos (N=5) compostos por um grupo com controle de células de C. albicans e com PCL puro, além das três concentrações de NIS. A seguir, foi analisada a viabilidade celular em queratinócitos humanos (HaCat) por meio do teste colorimétrico de resazurina. Cinco grupos foram divididos (N=10): controle celular, PCL puro e as três concentrações de NIS. Em modelos animais de ratos Wistar albinos (N=18), dispositivos palatinos (DP) de resina acrílica foram confeccionados simulando próteses totais e utilizados para a indução da EP. Para isso, DP contaminados com C. albicans foram cimentados na região molar da cavidade bucal dos animais e permaneceram em boca por 48 h. Após esse período, os DP foram removidos e os animais foram divididos em três grupos: (C) controle; (B1) com tratamento por mantas de PCL/NIS 0,045 g e (B2) PCL/NIS 0,225 g, com N=6. Então novos DP, livres de contaminação, foram cimentados na cavidade oral dos animais e permaneceu por mais 48 h. Após esse período, os animais foram eutanasiados, a contagem de UFC/ mL foi realizada e os palatos foram coletados para a análise histológica. A curva padrão de NIS obtida apresentou R2 de 0,99. As três concentrações de NF apresentaram liberação de NIS, com pico no tempo de 6 h e valores de 66,26 µg/ mL para PCL/NIS 0,045 g, de 333,87 µg/ mL para PCL/NIS 0,090 g e 436,51 µg/ mL para PCL/NIS 0,225 g, constantes até o fim do experimento. Os grupos com NIS reduziram em 2,5 log10 de crescimento do biofilme fúngico em relação aos grupos sem tratamento, Controle e PCL, sem diferença estatística significativa. Não foi observada citotoxicidade nas células HaCat, com viabilidade celular de 93,7% para PCL/NIS 0,045 g, 72,6% para PCL/NIS 0,090 g e 72,4% para PCL/NIS 0,225 g. A indução da EP nos três grupos foi possível e, porém, sem redução significativa na contagem de UFC/ mL de C. albicans nos grupos B1 e B2. Na análise histológica do grupo C pôde-se observar infiltração de hifas de Candida na camada queratinizada, presença de células inflamatórias formando micro abscessos e um discreto infiltrado inflamatório no tecido conjuntivo subjacente ao epitélio infectado. Nos grupos B1 e B2 não foram encontradas alterações epiteliais, concluindo-se que as NF demonstraram atividade antifúngica in vitro e foram efetivas na prevenção da penetração de hifas no tecido palatino de animais com DP (AU)

This study evaluated the in vitro and in vivo efficacy of nanofiber (NF) mats of polycaprolactone (PCL) incorporated with nystatin (NIS) in the treatment of denture stomatitis (DS) in animal models. NFs were synthesized with different concentrations of NIS, totaling four solutions: pure PCL, PCL/NIS 0.045 g, PCL/NIS 0.090 g, and PCL/NIS 0.225 g. The release of NIS was analyzed by Ultraviolet-Visible spectroscopy. The ability of the mats to inhibit Candida albicans biofilm, the main etiological factor of DS, was assessed by dividing five groups (N=5) composed of a group with C. albicans cell control and with pure PCL, in addition to the three concentrations of NIS. Next, cell viability in human keratinocytes (HaCat) was analyzed using the resazurin colorimetric test. Five groups were divided (N=10): cell control, pure PCL, and the three concentrations of NIS. In albino Wistar rat animal models (N=18), palatal devices (PD) made of acrylic resin were fabricated to simulate total prostheses and used to induce DS. For this, PD contaminated with C. albicans were cemented in the molar region of the animals' oral cavity and remained in the mouth for 48 hours. After this period, the PDs were removed, and the animals were divided into three groups: (C) control; (B1) treated with PCL/NIS 0.045 g mats, and (B2) PCL/NIS 0.225 g, with N=6. Then new, uncontaminated PDs were cemented in the animals' oral cavity and remained for another 48 hours. After this period, the animals were euthanized, UFC/ mL counts were performed, and the palates were collected for histological analysis. The standard NIS curve obtained showed an R2 of 0.99. The three concentrations of NF showed NIS release, with a peak at 6 h and values of 66.26 µg/ mL for PCL/NIS 0.045 g, 333.87 µg/ mL for PCL/NIS 0.090 g, and 436.51 µg/ mL for PCL/NIS 0.225 g, remaining constant until the end of the experiment. The groups with NIS reduced fungal biofilm growth by 2.5 log10 compared to the untreated groups, Control and PCL, with no significant statistical difference. No cytotoxicity was observed in HaCat cells, with cell viability of 93.7% for PCL/NIS 0.045 g, 72.6% for PCL/NIS 0.090 g, and 72.4% for PCL/NIS 0.225 g. Induction of DS in the three groups was possible; however, there was no significant reduction in UFC/ mL counts of C. albicans in groups B1 and B2. Histological analysis of group C revealed infiltration of Candida hyphae in the keratinized layer, presence of inflammatory cells forming micro abscesses, and a discreet inflammatory infiltrate in the connective tissue underlying the infected epithelium. No epithelial alterations were found in groups B1 and B2, concluding that NFs demonstrated in vitro antifungal activity and were effective in preventing hyphal penetration into palatal tissue in animals with PD.(AU)

Utility of Panoramic Radiographs in the Screening of Individuals with Edentulous Arches: A Need-Analysis Study

Abstract Objective: To evaluate the utility of panoramic radiographs in pre-prosthetic screening of edentulous arches. Material and Methods: Panoramic radiographs taken for three years were retrospectively analyzed. Observations from the radiographs shall be categorized and classified into either of the two categories, namely: 'findings with minimal impact on denture fabrication' and 'findings which affect denture fabrication and require further evaluation.' Anatomic variations, jaw pathologies, and residual ridge resorption patterns were assessed. Results: This study included the initial screening of 23,020 panoramic radiographs, out of which 505 (showing either one or both edentulous arches) were included for the study purpose. The age range of the subjects was from 21 to 94 years. 52.6% of the radiographs showed positive findings. More than half of the radiographs belonged to the males (52.5%). Hyperpneumatization of the maxillary sinus, crestal position of the mental foramen, and retained root fragments were the most common entities noted in the radiographs. Changes in the mental foramen were significantly higher in males than females (p=0.002). Conclusion: Observations from this study showed that panoramic radiographs have high utility for screening edentulous arches, and they should be used in routine clinical practice before denture fabrication.

Manifestaciones orales en pacientes cubanos con COVID-19 hospitalizados y no hospitalizados: Análisis transversal a través de una encuesta / Oral Manifestations in Hospitalized and Non-Hospitalized Cuban Patients with COVID-19: A Cross-Sectional Analysis through a Survey

Introduction: COVID-19 continues to drive research aimed at elucidating the disease's behavior and clinical aspects for improved diagnosis. Objective: To describe oral manifestations reported through a survey by dentate and denture-wearing Cuban individuals hospitalized due to confirmed COVID-19 infection. Methods: A cross-sectional descriptive study was conducted through a survey, involving Cuban individuals aged 18 years and above, confirmed COVID-19 positive by PCR. Exclusions encompassed smokers, alcoholics, regular medication users, those with poor oral hygiene, and individuals with pre-existing oral manifestations. A questionnaire was administered to over a thousand individuals, of which 264 met the criteria. Variables related to COVID-19 infection and oral hygiene were assessed. Data were processed using SPSS, adhering to ethical principles. Results: The study comprised 264 participants with an average age of 39.96 years. Xerostomia emerged as the most prevalent oral manifestation (40.2 por ciento), followed by mandibular pain, TMJ, or bone pain (18.9 por ciento), and non-dental mouth pain (12.5 por ciento). Xerostomia was more prevalent in the 35 to 39 age group, while mandibular pain predominated in the 50 to 54 age group. No statistically significant evidence was found for dentate individuals or denture wearers, but significance was observed for those requiring hospitalization, exhibiting painless tongue lesions, single ulcers, and painful tongue lesions. Conclusions: Xerostomia was the most prevalent oral manifestation, followed by mandibular pain, TMJ or bone pain, and non-dental mouth pain. A statistically significant association was noted between the need for hospitalization and certain oral manifestations. The use of dentures was not significantly related to the studied manifestations(AU)

Introducción: La COVID-19 continúa generando interés en investigaciones que buscan esclarecer el comportamiento de la enfermedad y sus aspectos clínicos para facilitar el diagnóstico. Objetivo: Describir las manifestaciones orales informadas por individuos cubanos dentados, con prótesis, que fueron hospitalizados al dar positivo por COVID-19. Métodos: Se llevó a cabo un estudio descriptivo transversal a través de una encuesta con una muestra de individuos cubanos mayores de 18 años, infectados por COVID-19 y confirmados mediante PCR. Se excluyeron fumadores, alcohólicos, usuarios regulares de medicamentos, personas con mala higiene bucal y aquellos con manifestaciones bucales previas a la infección. Se aplicó un cuestionario a más de mil individuos, de los cuales 264 cumplieron con los criterios. Se utilizaron variables relacionadas con la infección por COVID-19 y la higiene bucal. Los datos se procesaron con SPSS, respetando los principios éticos. Resultados: El estudio incluyó a 264 participantes con una edad promedio de 39,96 años. La xerostomía fue la manifestación bucal más prevalente (40,2 percent), seguida por el dolor mandibular, ATM o hueso (18,9 percent) y el dolor de boca no dental (12,5 percent). La xerostomía fue más frecuente en el grupo de 35 a 39 años, mientras que el dolor mandibular predominó en el grupo de 50 a 54 años. No se encontró evidencia estadística significativa para pacientes dentados o portadores de prótesis, pero sí para aquellos que necesitaron hospitalización, con lesiones en la lengua sin dolor, úlceras únicas y lesiones en la lengua con dolor. Conclusiones: La xerostomía fue la manifestación bucal más prevalente, seguida por el dolor mandibular, ATM o hueso, y el dolor de boca no dental. Se observó una asociación estadísticamente significativa entre la necesidad de hospitalización y ciertas manifestaciones bucales. No se encontró significativo el uso de prótesis en relación con las manifestaciones estudiadas(AU)

Is scanning under rubber dam isolation a feasible approach for the execution of indirect restorations? / O escaneamento sob isolamento absoluto é uma técnica viável para execução de restaurações indiretas?

Objective: The aim of the study was to report the aplicability of intraoral scanning while rubber dam isolation is in place. Material and Methods: Female patient, 50 years old, required restorative procedures on teeth 35 and 37. An intraoral scan was initially performed on both arches. Isolation was carried out from 33 to 37, tooth preparation and immediate dentin sealing were carried out. A new scan with the rubber dam in place was performed and a CAD/CAM lithium disilicate hybrid block was digitally designed, milled, crystallized and cemented under the tooth surface with the rubber dam still in position. After completing this stage, the rubber dam was removed, the occlusion was verified, presenting excellent aesthetic and functional results. Results: The absolute isolation process used in the present study works as an excellent device for gingival retraction. Conclusion: The absolute isolation can be recommended in clinical activities of intraoral scanning favoring the quality of the final result of treatments (AU)

Objetivo: O objetivo do estudo foi relatar a aplicabilidade do escaneamento intraoral sob isolamento absoluto. Material e Métodos: Paciente do sexo feminino, 50 anos, necessitou de procedimentos restauradores nos dentes 35 e 37. Uma varredura intraoral foi inicialmente realizada em ambos os arcos. O isolamento absoluto foi feito de 33 a 37, permitindo a realização do preparo dentário e selamento imediato da dentina. Um novo escaneamento com o dique de borracha colocado foi realizado e um bloco híbrido de dissilicato de lítio CAD/CAM foi projetado digitalmente, fresado, cristalizado e cimentado sob a superfície dentária ainda com o dique de borracha em posição. Após a finalização dessa etapa, o dique de borracha foi removido, a oclusão foi verificada apresentando ótimos resultados estéticos e funcionais. Resultados: O isolamento absoluto utilizado no presente estudo funciona como um excelente dispositivo para retração gengival. Conclusão: O isolamento absoluto pode ser recomendado em atividades clínicas de escaneamento intraoral favorecendo a qualidade do resultado final dos tratamentos (AU)

Digital repair for a patient with limited mouth opening: a case report and literature review / 口腔疾病防治

Objective@#To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening (microstomia) due to systemic scleroderma.@*Methods@#This study followed medical ethics, and informed consent has been obtained from patients. A case of Ken's Type I mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression. Individual trays were made based on the patient's left and right mandibular dentition, and segmented molds were obtained. Simultaneously, intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles. After each part of the model was obtained, the mandibular model was scanned and digitally aligned to form the final denture model, and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing (CAD/CAM) technology. At the same time, combined with the literature, the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.@*Results@#The denture was well retained and achieved a good repair effect. The patients expressed satisfaction with the mastication efficiency and other functions of the denture. The findings of the literature review show that the integration of digital technology with the traditional impression method, along with computer fitting, can accurately obtain the patient's oral model and facilitate successful follow-up repairs. However, when the anterior mandibular dentition of the patient is absent, the margin of error is increased in this procedure, which deserves further exploration.@*Conclusion@#Utilizing digital technology as the leading method, combined with the traditional impression method of segmental impression, for the repair of dental defects in patients with limited mouth opening, has proven to be effective. Thus, patients report a positive medical experience with high satisfaction, indicating that this approach is worthy of clinical promotion.

Clinical application of lithium disilicate glass ceramic cantilever resin-bonded fixed partial denture in the restoration of single anterior tooth loss / 口腔疾病防治

Objective@#To investigate the clinical effect of lithium disilicate glass ceramic cantilever resin-bonded fixed partial dentures (CRBFPDs) on single anterior tooth loss to provide a reference for the selection of restoration methods for single anterior tooth loss.@*Methods@#This study was reviewed and approved by the Ethics Committee, and informed consent was obtained from the patients. Forty-two patients with less than two anterior teeth with monomaxillary loss were included in this study. After 6 months, 1 year, 2 years, and 3 years, the aesthetic and functional effects of the restorations and the periodontal health status were evaluated, and the visual analog scale (VAS) was used to assess patient satisfaction.@*Results@#During the observation period, the connector fractured in one case within 3 months. One case had debonded within 2 years. The aesthetic restoration effect of all lithium disilicate glass ceramic CRBFPDs was categorized as Class A. The periodontal health was good, there was no clinical absorption in the soft and hard tissues of the abutment or subbridge, periodontal status according to the evaluation indices was classified as class A, and the total satisfaction rate of the patient was 100%.@*Conclusion@#For single anterior tooth loss patients, lithium disilicate glass ceramic cantilever resin-bonded fixed partial denture can achieve the restoration effect of less invasion, better adhesion, aesthetics, comfort and good biocompatibility. With high patient satisfaction, it can be considered an ideal restoration method for replacing a single anterior tooth.

Reabilitação oral com próteses parciais removíveis após restabelecimento de dimensão vertical de oclusão e tratamento multidisciplinar: relato de caso / Oral rehabilitation with removable partial dentures after restoration of the vertical dimension of occlusion and multidisciplinary treatment: case report

As próteses parciais removíveis (PPRs) são uma alternativa de tratamento viável na prática clínica para reabilitar arcos parcialmente desdentados. Entretanto, o planejamento dessas próteses e preparo bucal prévio são frequentemente negligenciados. O presente artigo tem como objetivo relatar o caso clínico de uma reabilitação oral com PPRs superior e inferior após abordagem multidisciplinar, de modo a enfatizar as fases de um planejamento criterioso e de preparo prévio dos dentes pilares, visando o sucesso e a longevidade da reabilitação. Paciente do sexo masculino de 57 anos de idade compareceu à clínica da Faculdade de Odontologia de Bauru, Universidade de São Paulo, queixando-se da estética de seu sorriso e de algumas ausências dentárias. O indivíduo utilizava uma PPR provisória inferior insatisfatória e apresentava perda de dimensão vertical de oclusão (DVO). Após o exame clínico, radiográfico e estudo do caso em articulador semi-ajustável, realizou-se o planejamento com abordagens restauradoras, endodônticas, periodontais e protéticas. Após tratamento periodontal, foi realizada endodontia dos elementos 12, 15 e 47, confecção de núcleos e coroas nos dentes 12 e 15, restauração a nível gengival para apoio residual no dente 47, restaurações nos dentes 11, 13, 22, 24 e 44 e, por fim, a confecção das PPRs superior e inferior. A abordagem multidisciplinar utilizada neste caso clínico viabilizou o restabelecimento da DVO e possibilitou o sucesso da reabilitação protética(AU)

Removable partial dentures (RPDs) are a viable treatment alternative in clinical practice to rehabilitate partially edentulous arches. However, the planning of these dentures and prior oral preparation are often neglected. This article aims to report the clinical case of an oral rehabilitation with upper and lower RPDs after a multidisciplinary approach, to emphasize the phases of careful planning and prior preparation of the abutment teeth, aiming at the success and longevity of the rehabilitation. A 57-year-old male patient came to the clinic of the Bauru School of Dentistry, University of São Paulo, complaining about the esthetics of his smile and some missing teeth. The subject was using an unsatisfactory lower provisional prosthesis and had a loss of vertical dimension of occlusion (OVD). After the clinical and radiographic examination and the case study in a semi-adjustable articulator, planning was carried out with restorative, endodontic, periodontal and prosthetic approaches. After periodontal treatment, endodontics were performed on elements 12, 15 and 47, creation of cores and crowns on teeth 12 and 15, restoration at the gingival level for residual support on tooth 47, restorations on teeth 11, 13, 22, 24 and 44 and, finally, the making of the upper and lower PPRs. The multidisciplinary approach used in this clinical case enabled the restoration of the OVD and enabled the success of the oral rehabilitation(AU)

The bruxism paradigm in the absence of teeth: observational cross-sectional study in full denture users / O paradigma do bruxismo na ausência de dentes: estudo observacional de corte transversal em usuários de próteses totais

ABSTRACT BACKGROUND AND OBJECTIVES: Bruxism is defined as an activity of the masticatory muscles, which is independent of the teeth presence, so it can occur in total edentulous patients and users of dental prostheses. In this sense, It is therefore necessary to know the clinical manifestations of bruxism in this population. The objective of this study was to evaluate the clinical manifestation and the presence of probable sleep and awake bruxism in a sample of users of full dentures treated at a teaching dental clinic in the city of Ribeirão Preto/SP. METHODS: The adopted sample consisted of 30 patients (mean age 72 years, 18 women/12 men). The following questionnaires were used to assess probable bruxism: Oral Behavior Checklist (OBC), Questionnaire of the American Academy of Orofacial Pain (AADO) and the Depression Anxiety and Stress Scale (DASS-21). The clinical assessment included the identification of wear on the prostheses, tongue indentations, bitten cheek and sensitivity in the masticatory muscles and temporomandibular joints. The data was analyzed using descriptive statistics. RESULTS: The average of use of the dentures were nine years. Six patients (20%) reported self-perceived sleep bruxism, and 11 (36%) reported self-perceived awake bruxism. OBC showed an average total score of 9.8 ± 6.2, with "teeth clenching" being the most described symptom. DASS-21 presented an average of 16.5, and stress, anxiety and depression were within normal limits. The most commonly reported symptoms in the AADO were headache, neck pain, pain and/or difficulty during jaw function and recent trauma to the head, neck or jaws. In the clinical evaluation, 15 (50%) patients had wear on prosthesis, only 2 (6%) had bitten cheek, none had tongue indentations, 4 (13%) had pain during palpation. CONCLUSION: Despite the limitations of the study (cross-sectional, small sample and absence of instrumental evaluation of bruxism), it is possible to conclude that a significant portion of users of total dentures presented probable bruxism, with tooth clenching being the main report and wear on the prosthesis the main clinical manifestation.

RESUMO JUSTIFICATIVA E OBJETIVOS: O bruxismo é definido como uma atividade da musculatura mastigatória, que independe da presença de dentes, portanto pode ocorrer em pacientes desdentados totais e usuários de próteses dentárias. Assim, é preciso conhecer como o bruxismo se manifesta clinicamente nessa população. O objetivo deste estudo foi investigar a presença do provável bruxismo de sono e de vigília em usuários de prótese total atendidos em uma clínica odontológica de ensino em Ribeirão Preto/SP. MÉTODOS: Uma amostra de conveniência foi composta por 30 pacientes (média de 72 anos, 18 mulheres e 12 homens). Os seguintes questionários foram utilizados para avaliar o provável bruxismo: Oral Behavior Checklist (OBC), Questionário da Academia Americana de Dor Orofacial (AADO) e o Depression Anxiety and Stress Scale (DASS-21). A avaliação clínica incluiu a identificação de desgastes nas próteses, língua dentada, bochecha mordiscada e sensibilidade nos músculos mastigatórios e nas articulações temporomandibulares. Os dados foram analisados por meio de estatística descritiva. RESULTADOS: A média de uso das próteses foi de nove anos. Seis indivíduos (20%) relataram bruxismo do sono e 11 (36%) relataram bruxismo de vigília. O OBC apresentou média de escore total de 9,8 ± 6,2, sendo "apertar de dentes" o sintoma mais descrito. O DASS-21 apresentou média total de 16,5, com valores de estresse, ansiedade e depressão dentro da normalidade. Os sintomas mais relatados no AADO foram cefaleia, dores no pescoço, dor e/ou dificuldade durante a função mandibular e trauma recente na cabeça, pescoço ou maxilares. Na avaliação clínica, 15 (50%) dos pacientes apresentaram desgastes na prótese, 4 (13%) dor por palpação, 2 (6%) bochecha mordiscada e nenhum (0%) língua dentada. CONCLUSÃO: Apesar das limitações deste estudo (corte transversal, amostra reduzida e ausência de avaliação instrumental do bruxismo) foi possível concluir que uma parcela significativa de usuários de próteses totais apresentou provável bruxismo, sendo o apertamento dentário o principal relato e desgastes na prótese a principal manifestação clínica.

Invitro Comparative Analysis of the Flexural Strength of 4 Different Commercially Available Provisional Materials Used in Fixed Partial Dentures – An Original Research

Background: Provisional Prosthesis in fixed partial dentures are subjected to Flexure under stress. Selection of appropriate material for fabrication of Provisional is of utmost importance as the Provisional prosthesis has to remain in function till definitive prosthesis is delivered. Material & Methods: Bar type specimens of four different commercially available brands for provisional restorations fabricated according to ADA specification No. 27 and immersed in artificial saliva. The specimens were fractured under 3-point loading test. Results: The flexural strength ranged between 60 to 110 Mpa. BisGMA Auto polymerizing composite resin from Dentsply Caulk shows the highest flexural strength. Conclusion: Within the limitations of this study, the flexural strengths were material specific rather than category one. The BisGMA composite based resin shows significantly higher flexural strength over other materials

Relationship between the occlusal plane and three different levels of ala-tragus line in a sample of sudanese adults / Relación entre el plano oclusal y tres niveles diferentes de la línea ala-trago en una muestra de adultos sudaneses

Aim: Correct orientation of the occlusal plane plays a vital role in achieving the perfect occlusal balance and function of complete dentures. This study aimed to evaluate the most reliable posterior reference point of the ala-tragus line (ATL) concerning occlusal plane (OP) in a sample of the dentate Sudanese population. Materials and Methods: A total of 150 subjects with healthy and well-aligned permanent teeth were randomly selected. Right lateral profile photographs were taken with subjects having a fox plane placed intra-orally, contacting the occlusal plane. Reference points corresponding to inferior, middle, and superior borders of the tragus and inferior border of the ala of the nose were marked on photographs. The angles between the lines were measured using the Auto-CAD software program, and the most parallel relationship was determined. Descriptive statistics in terms of means and standard deviations were presented. Independent t-test and one-way ANOVA tests were used to compare as appropriate. A p-value < 0.05 was considered significant. Results: The mean angle formed by the OP and ATL was 8.5±3.69º for the superior level, 4.68±3.13º for the middle line, and 2.89±2.57º for the inferior line. A significant difference was found between the means of the three angles (p< 0.001), while no significant difference (p> 0.05) was found between both genders regarding the measured angles. Conclusions: The line joining the inferior border of the ala of the nose with the inferior border of the tragus of the ear was the most reliable line in terms of parallelism to determine the occlusal plane orientation.

Antecedentes: La orientación correcta del plano oclusal juega un papel vital para lograr el equilibrio oclusal perfecto y la función de las prótesis completas. Este estudio tuvo como objetivo evaluar el punto de referencia posterior más confiable de la línea ala-trago (ATL) con respecto al plano oclusal (OP) en una muestra de la población dentada de Sudán. Materiales y Métodos: Se seleccionaron aleatoriamente un total de 150 sujetos con dientes permanentes sanos y bien alineados. Se tomaron fotografías de perfil lateral derecho de sujetos a los que se les colocó un plano de zorro intraoralmente, en contacto con el plano oclusal. En las fotografías se marcaron los puntos de referencia correspondientes a los bordes inferior, medio y superior del trago y al borde inferior del ala de la nariz. Los ángulos entre las líneas se midieron utilizando el programa de software Auto-CAD y se determinó la relación más paralela. Se presentaron estadísticas descriptivas en términos de medias y desviaciones estándar. Se utilizaron prueba-t independiente y prueba ANOVA unidireccional para las comparaciones, según correspondiera. Se consideró significativo un valor de p<0,05. Resultados: El ángulo medio formado por OP y ATL fue de 8,5±3,69º para el nivel superior, 4,68±3,13º para la línea media y 2,89±2,57º para la línea inferior. Se encontró una diferencia significativa entre las medias de los tres ángulos (p< 0,001), mientras que no se encontró diferencia significativa (p>0,05) entre ambos sexos con respecto a los ángulos medidos. Conclusión: La línea que une el borde inferior del ala de la nariz con el borde inferior del trago de la oreja fue la línea más confiable en términos de paralelismo para determinar la orientación del plano oclusal.

Desarrollo y aplicación de un software educativo bidimensional para el proceso de enseñanza del diseño de Prótesis Parcial Removible / Validation of a two-dimensional educational software for the learning process of the design of Removable Partial Dentures

Objetivo: El objetivo de este estudio fue desarrollar e implementar un software educativo bidimensional para el proceso de aprendizaje del diseño de Prótesis Parciales Removibles.Materiales y métodos: Se utilizó el método científico y procedimientos de evaluación educativa para abordar las necesidades de la asignatura de Prótesis Parcial Removible en la Facultad de Odontología de la UNMSM de Perú en el año 2022. Se utilizó análisis, síntesis y encuestas. Se examinó la aplicabilidad del software y el cumplimiento de los requerimientos de enseñanza y aprendizaje, no sólo en la UNMSM sino en cualquier universidad con requerimientos y características similares. Resultados: La aplicación in-terna del software arrojó un valor final del 96%, mientras que la evaluación de alumnos y docentes mostró un 90% de aceptación, al considerar que el SEDUPPR es sencillo para instalar, sencillo en su manejo y funcionamiento, y es muy útil para aprender diseño de PPR. Conclusiones: El software educativo bidimensional diseñado para el proceso de aprendizaje de Prótesis Parcial Removible es aplicable y puede ser implementado en diferentes ámbitos educativos.

Objective: The objective of this study was to develop and implement a two-dimensional educational software for the learning process of designing Removable Partial Prostheses.Materials and Methods: The scientific method and educational evaluation procedures were utilized to address the needs of the Removable Partial Prosthesis subject in the Fa-culty of Dentistry at the UNMSM in Peru in 2022. Analysis, synthesis, and surveys were used. The software's applicability and fulfillment of teaching and learning requirements were examined, not only at the UNMSM but also in any university with similar require-ments and characteristics. Results: The internal application of the software yielded a final value of 96%, while the evaluation of students and teachers showed a 90% acceptance rate, considering that SEDUPPR is simple to install, easy to use and operate, and is very useful for learn PPR design. Conclusion: The two-dimensional educational software designed for the learning process of Removable Partial Prosthesis is applicable and can be implemented in different educational settings.

Stability of Denture Base Acrylic Resin to Tea, Coffe and Turmeric Solutions: An in Vitro Study

Background: The color stability of commercially available denture base acrylic resins (Lucitone-199, DPI and Travelon-HI) was studied in vitro. Material & Methods: The specimens were exposed to tea, coffee and turmeric solutions at 37 ± 1 °C. Colour measurement of the specimens from each brand of denture base acrylic resin recorded by spectrophotometer. The specimens were washed under distilled water and dried before measuring the colour on 0, 10, 20 and 30 days of immersion and color differences were calculated. Results: Statistically the colour change was significant between and within the groups of different heat cure denture base acrylic resins. Conclusion: Where as Lucitone-199 heat cure showed the highest colour variation in tea and coffee followed by DPI and Travelon-HI.

Cambios en parámetros masticatorios con prótesis parcial removible para dientes posteriores perdidos / Changes in masticatory parameters with removable partial dentures for missing posterior teeth

Introducción: el reemplazo de dientes perdidos aspira a mejorar la función masticatoria. Aunque hay diferentes opciones para ello, la conveniencia de la prótesis parcial removible (PPR) es su bajo costo. Objetivo: comparar el desempeño masticatorio (DM) después de 20 ciclos masticatorios y al umbral de la deglución (UD) en adultos de 50 a 70 años con dientes posteriores perdidos (DPP), con/sin PPR; y los ciclos hasta la deglución. Material y métodos: estudio transversal en 35 adultos con dientes anteriores y PPR bien ajustadas y utilizadas para comer. El lado de prueba fue el lado con más DPP. El DM se evaluó después de 20 ciclos y al UD utilizando un alimento prueba artificial (Optosil Comfort®) con/sin la PPR en orden aleatorizado. Las partículas se tamizaron para determinar el tamaño medio de partícula (TMP) como medida del DM. Los ciclos se contaron visualmente. Estadística descriptiva y comparaciones con SPSS-v23. Resultados: hubo diferencias significativas (p ≤ 0.05) al masticar con/sin PPR. El TMP fue más pequeño (mejor DM) con la PPR después de 20 ciclos y al UD (3.9 vs 4.4 mm y 3.2 vs 4.2 mm). Los ciclos para llegar al UD disminuyeron con la PPR (40 vs 47). Conclusión: a pesar de una mejora limitada de la función masticatoria, las PPR ayudan a preparar los alimentos en partículas más pequeñas antes de deglutirlas. La mejoría en DM con PPR es de 24% al UD, realizando menos ciclos antes de deglutir sus alimentos (AU)

Introduction: replacement of missing teeth should improve masticatory function. Although there are different options removable partial dentures (RPD) are used due to their lower cost. Objective: to compare masticatory performance (MP) after 20 chewing-cycles and swallowing-threshold (ST) in 50-70 year-old adults with missing posterior teeth (MPT) with and without their cast-metal RPD; chewing cycles until swallowing were also compared. Material and methods: 35 adults participated in this cross-sectional study. Subjects with anterior teeth and welladjusted RPDs, used for eating were included. The side with more MPT was selected as the test side. MP was evaluated after 20 cycles and ST using an artificial test-food (Optosil Comfort®) with/without the RPD (subject-own-control) (randomized order). Chewed particles were sieved to determine medium-particle-size (MPS) as a measure of MP. Chewing cycles were visually counted. Descriptive statistics and comparisons were run with SPSS v23. Results: there were significant differences (p ≤ 0.05) for all parameters when chewing with/without the RPD. MPS was smaller (better MP) with the RPD (3.9 vs 4.4 mm and 3.2 vs 4.2 mm) after 20 cycles and ST respectively. Cycles required to reach ST were less when chewing with the denture (40 vs 47). Conclusion: despite a limited improvement of masticatory function RPDs help patients prepare their food into smaller particles before swallowing. Improvement in MP with RPDs for patients with MPT is 24% at ST and they perform fewer chewing cycles before swallowing food (AU)

A systematic review and meta-analysis of the clinical performance of implant-supported overdentures retained by CAD-CAM bars

Abstract Currently, there is no consensus on the indications and clinical performance of implant-supported overdentures (IODs) involving computer-aided design and manufacturing (CAD-CAM) bars. Objective: To evaluate the performance of IODs involving CAD-CAM bars. Methodology: A comprehensive search of studies published until May 2023 was conducted in many databases, including PubMed/MEDLINE, Web of Science, Cochrane Library, and SciELO, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). The population, intervention, comparison, outcome (PICO) question was: "How do IODs retained by bars fabricated by CAD-CAM technology perform in daily clinical practice?" The meta-analysis included clinical studies based on effect size and a two-tailed null test with a 95% confidence interval (CI). Results: Ten studies were included in the meta-analysis. Among them, nine reported a 100% implant survival rate for all CAD-CAM milled bars. Complications were reported in two studies with CAD/CAM-milled titanium bars, and one study reported more fractures in soldered gold bars used in maxillary rehabilitation. However, no fractures were observed in IODs retained by PEEK and zirconia bars. According to six studies, biological complications, including peri-implantitis, were minimal in the BioHPP and PEEK bar groups, while no cases were reported in the titanium or zirconia bar groups. CAD-CAM-milled zirconia bars had higher plaque and bleeding indices compared with titanium bars, as evidenced by findings from five studies. All four studies that evaluated Oral Health Impact Profile (OHIP) scores showed a positive effect of IODs retained by CAD-CAM milled titanium bars on quality of life. Patient satisfaction and acceptance by prosthodontists were significantly high, according to the results of five studies. Conclusion: Overdentures retained with CAD-CAM milled titanium bars show great potential for use in daily clinical practice. Moreover, patient and practitioner satisfaction was very high when this method was used.

Effectiveness of disinfectant solutions associated or not with brushing on the biofilm control of a 3D printed-denture base resin

Abstract The formation of biofilm on denture bases is a recurrent clinical problem that favors the development of denture stomatitis. The effectiveness of a hygiene protocol in a 3D-printed denture base resin is still uncertain. Objective To evaluate of the effectiveness of immersion, associated or not with brushing in a soap solution, on the biofilm control of a 3D-printed denture base resin. Methodology Specimens of denture base resins [Cosmos Denture (COS) and Classico (CLA/control)] were contaminated in vitro with Candida albicans and immersed in sodium hypochlorite 0.25% (SH, alkaline peroxide) AP, chlorhexidine digluconate 2% (CD or PBS-Control), associated or not with brushing with 0.78% Lifebuoy soap. Roughness was evaluated before and after brushing and immersion. The effectiveness of the protocols was assessed by CFU/mL, cellular metabolism (XTT), scanning electron microscopy (SEM), and confocal scanning laser microscopy. Data were analyzed by T student, ANOVA/Welch, and Tukey/Gomes-Howell pos-hoc tests (α = 0.05). Results CLA showed greater roughness than COS. CFU/mL and XTT were higher in COS resin with a higher hyphae formation. Immersion in SH and CD eliminated CFU/mL and reduced XTT for both resins, associated or not with brushing. AP reduced CFU/mL only when associated with brushing. Conclusions The biofilm on the 3D-printed resin was thicker and presumably more pathogenic, regardless of its smoother surface. Immersions in SH 0.25% and CD 2% are effective hygiene protocols for both resins, associated or not with brushing. AP should be recommended when associated with brushing with a Lifebuoy 0.78% solution.

The importance of properly distributing the occlusal load for the correct biomechanics of implant-supported fixed partial dentures: stress analysis in implants, prosthetic components and infrastructures / A importância da distribuição da carga oclusal de forma adequada para a correta biomecânica de prótese parcial fixa implantosuportada: análise das tensões em implantes, componentes protéticos e infraestruturas

ABSTRACT Objective: The present study analyzed the biomechanical behavior of the generated stress on the external surface of the rehabilitation elements (implants, components and infrastructures) according to different occlusion patterns on a fixed partial denture on osseointegrated implants. Method: The experimental groups varied according to the location of the occlusal load applied to the Fixed partial denture, with a total occlusal load of 750N in all groups, opting for greater loads on the occlusal table of the molar in relation to the premolar. This evaluation was performed by the finite element method with simulations by the AnsysWorkbench 16.0 Software program. Results: The results analyzed for implants and their components showed that the more posterior the occlusal loading, the greater the stress developed (group 4), always in the connection area between the prosthetic component and the implant, as this location can induce greater screw loosening. The results analyzed for the infrastructures showed that the most distributed occlusal loading possible (group 1) is the best situation for generating less stress. However, even in group 3 which obtained the highest stresses in the critical area of the prosthetic connection, the zirconia flexural strength values generated were not worrisome. Conclusion: It can be concluded that the occlusal adjustment of Fixed partial dentures are preponderant and decisive factors for correct biomechanics and preservation of the system in the long term in order to avoid possible damage and/or failures, and exert significant and notorious differences in the behavior of all structures studied herein.

RESUMO Objetivo: O presente estudo analisou o comportamento biomecânico do estresse gerado na superfície externa dos elementos reabilitadores (implantes, componentes e infraestruturas) de acordo com diferentes padrões de oclusão em uma prótese parcial fixa sobre implantes osseointegrados. Métodos: Os grupos experimentais variaram de acordo com a localização da carga oclusal aplicada na Prótese Parcial Fixa, com carga oclusal total de 750N em todos os grupos, optando por cargas maiores na mesa oclusal do molar em relação ao pré-molar. Esta avaliação foi realizada pelo método dos elementos finitos com simulações pelo programa AnsysWorkbench 16.0 Software. Resultados: Os resultados analisados para os implantes e seus componentes mostraram que quanto mais posterior a carga oclusal, maior a tensão desenvolvida (grupo 4), sempre na área de conexão entre o componente protético e o implante, pois este local pode induzir maior soltura do parafuso. Os resultados analisados para as infraestruturas mostraram que a carga oclusal mais distribuída possível (grupo 1) é a melhor situação para gerar menos estresse. No entanto, mesmo no grupo 3 que obteve as maiores tensões na área crítica da conexão protética, os valores de resistência à flexão da zircônia gerados não foram preocupantes. Conclusões: Pode-se concluir que o ajuste oclusal das Próteses Parciais Fixas são fatores preponderantes e decisivos para correta biomecânica e preservação do sistema a longo prazo a fim de evitar possíveis danos e/ou falhas, e exercem diferenças significativas e notórias no comportamento de todas as estruturas aqui estudadas.

Development of a cell phone application as an auxiliary teaching tool for the subject of complete dentures / Desenvolvimento de aplicativo de celular intitulado: "Manual de Prótese Total ­ Reabilitando sorrisos", como uma ferramenta didática auxiliar para a disciplina de prótese total

Objective: The study aimed to develop a cell phone application entitled: "Total Prosthesis Manual ­ Rehabilitating smiles", as an auxiliary teaching tool for teachers and students through digital technology, with a smartphone. Material and Methods: The tool was structured on the "Application Factory website", which allows the creation of mobile applications in different formats, with broad and interactive features on IOS and Android platforms. The expository format of the content is in slide format, containing descriptive theory and images about the stages of making a complete prosthesis; from necessary materials, photos and descriptive guidance of the steps. Results: The application is a complementary teaching resource to assist undergraduate and postgraduate students and professionals working in the area of complete prosthetics. The theoretical and practical content selected for the application covered all stages of understanding, development and possible complications associated with the manufacture of a complete bimaxillary prosthesis, from planning, impressions, models, orientation plans, tooth assembly, adaptations and delivery. Conclusion: The application provided a low-cost, expandable and easy-to-use teaching resource for teaching complete dentures. It is essential to develop various analyzes such as user experience tests, application effectiveness, development of new technologies and improvement of techniques, so that their potential for enriching learning in complete dentures and dentistry in general can be verified.(AU)

Objetivo: O estudo teve como objetivo desenvolver um aplicativo de celular intitulado: "Manual de Prótese Total ­ Reabilitando sorrisos", como uma ferramenta didática auxiliar para professores e alunos por meio da tecnologia digital, com smartphone. Material e Métodos: A ferramenta foi estruturada no "site da Fábrica de Aplicativos", que permite a criação de aplicativos móveis em diversos formatos, com recursos amplos e interativos nas plataformas IOS e Android. A modalidade expositiva do conteúdo é em formato de slides, contendo teoria descritiva e imagens sobre as etapas de confecção de uma prótese total; a partir de materiais necessários, fotos e orientação descritiva das etapas. Resultados: O aplicativo é um recurso didático complementar para auxiliar estudantes de graduação, pós-graduação e profissionais que atuam na área de prótese total. O conteúdo teórico e prático selecionado para a aplicação visou todas as etapas de compreensão, desenvolvimento e possíveis complicações associadas à confecção de uma prótese total bimaxilar, desde o planejamento, moldagens, maquetes, planos de orientação, montagem dos dentes, adaptações e entrega. Conclusão: O aplicativo trouxe um recurso didático de baixo custo, expansível e fácil de usar para o ensino de próteses totais. É fundamental desenvolver diversas análises como testes de experiência do usuário, eficácia de aplicação, desenvolvimento de novas tecnologias e aprimoramento de técnicas, de forma que possa ser verificado seu potencial de enriquecimento do aprendizado em prótese total e odontologia em geral(AU)

Crioterapia en pacientes geriátricos con estomatitis subprótesis

Introducción: En la actualidad se emplean nuevas alternativas no invasivas para la remoción de diversos procesos inflamatorios del epitelio mucoso bucal, siendo la crioterapia una técnica fisioterapéutica basada en la aplicación del frío intenso con nitrógeno líquido para producir en la piel o mucosas del organismo una congelación y destrucción local de células y tejidos afectados de forma controlada. Objetivo: Evaluar los efectos terapéuticos de la criocirugía en pacientes geriátricos portadores de estomatitis subprótesis. Métodos: Se efectuó un estudio descriptivo y transversal de 50 pacientes adultos mayores, de ambos sexos, diagnosticados con estomatitis subprótesis y asistidos en la consulta estomatológica del Policlínico de Especialidades referente al Hospital Clinicoquirúrgico Universitario Saturnino Lora Torres de la provincia Santiago de Cuba, en el periodo comprendido desde marzo de 2022 hasta igual mes de 2023. Resultados: Se evidenció que las congelaciones entre 20 y 30 segundos y los deshielos entre 91 y 120 segundos fueron los más eficaces en la destrucción de la mucosa palatina dañada, logrando la regeneración tisular en un tiempo mínimo con la indicación de uno a tres ciclos de enfriamientos rápidos y deshielos lentos en una sesión terapéutica. La ausencia de síntomas fue lo más relevante en la evolución postquirúrgica. Conclusiones: La crioterapia demostró ser un método eficaz e inocuo para regenerar los tejidos lesionados al realizar congelaciones rápidas con deshielos lentos. Este método crioquirúrgico, fácil de aplicar y atraumático, logró una óptima reparación y reepitelización de los tejidos bucales dañados con excelentes respuestas terapéuticas, evitando complicaciones postquirúrgicas como la infección y el sangramiento local.

Introduction: At present, new non-invasive alternatives are used for the removal of various inflammatory processes of the oral mucous epithelium; being cryotherapy a physiotherapeutic technique based on the application of intense cold with liquid nitrogen to produce freezing on the skin or mucous membranes of the organism and local destruction of affected cells and tissues in controlled manner. Objective: To evaluate the therapeutic effects of cryotherapy in geriatric patients with sub-prosthesis stomatitis. Methods: A descriptive and cross-sectional study of 50 older adult patients, of both sexes, clinically diagnosed with subprosthesis stomatitis and assisted in the dentistry consultation of the Specialties Polyclinic referring to the Saturnino Lora Torres University Clinical Surgical Hospital in the city of Santiago de Cuba, in the period from March 2022 to the same month of 2023. Results: It was evidenced that freezing between 20 and 30 seconds and thawing between 91 and 120 seconds were the most effective in the destruction of the damaged palatal mucosa, achieving tissue regeneration in a minimum time with the performance of 1 to 3 cycles of rapid cooling and slow thawing in a therapeutic session. The absence of symptoms was the most relevant in the post-surgical evolution. Conclusions: Cryotherapy proved to be an effective and innocuous method to regenerate injured tissues when fast freezing with slow thawing. This cryosurgical method, easy to apply and atraumatic, achieved optimal repair and re-epithelization of damaged oral tissues with excellent therapeutic responses, avoiding post-surgical complications such as infection and local bleeding.