Timing calibration comparison research of integrated TOF-PET/MR / 生物医学工程学杂志

Integrated TOF-PET/MR is a multimodal imaging system which can acquire high-quality magnetic resonance (MR) and positron emission tomography (PET) images at the same time, and it has time of flight (TOF) function. The TOF-PET system usually features better image quality compared to traditional PET because it is capable of localizing the lesion on the line of response where annihilation takes place. TOF technology measures the time difference between the detectors on which the two 180-degrees-seperated photons generated from positron annihilation are received. Since every individual crystal might be prone to its timing bias, timing calibration is needed for a TOF-PET system to work properly. Three approaches of timing calibration are introduced in this article. The first one named as fan-beam method is an iterative method that measures the bias of the Gaussian distribution of timing offset created from a fan-beam area constructed using geometric techniques. The second one is to find solutions of the overdetermination equations set using L1 norm minimization and is called L1-norm method. The last one called L2-norm method is to build histogram of the TOF and find the peak, and uses L2 norm minimization to get the result. This article focuses on the comparison of the amount of the data and the calculation time needed by each of the three methods. To avoid location error of the cylinder radioactive source during data collection, we developed a location calibration algorithm which could calculate accurate position of the source and reduce image artifacts. The experiment results indicate that the three approaches introduced in this article could enhance the qualities of PET images and standardized uptake values of cancer regions, so the timing calibration of integrated TOF-PET/MR system was realized. The fan-beam method has the best image quality, especially in small lesions. In integrated TOF-PET/MR timing calibration, we recommend using fan-beam method.

Development of Regularized Expectation Maximization Algorithms for Fan-Beam SPECT Data / 대한핵의학회잡지

PURPOSE: SPECT using a fan-beam collimator improves spatial resolution and sensitivity. For the reconstruction from fan-beam projections, it is necessary to implement direct fan-beam reconstruction methods without transforming the data into the parallel geometry. In this study, various fan-beam reconstruction algorithms were implemented and their performances were compared. MATERIALS AND METHODS: The projector for fan-beam SPECT was implemented using a ray-tracing method. The direct reconstruction algorithms implemented for fan-beam projection data were FBP (filtered backprojection), EM (expectation maximization), OS-EM (ordered subsets EM) and MAP-EM OSL (maximum a posteriori EM using the one-step late method) with membrane and thin-plate models as priors. For comparison, the fan-beam projection data were also rebinned into the parallel data using various interpolation methods, such as the nearest neighbor, bilinear and bicubic interpolations, and reconstructed using the conventional EM algorithm for parallel data. Noiseless and noisy projection data from the digital Hoffman brain and Shepp/Logan phantoms were reconstructed using the above algorithms. The reconstructed images were compared in terms of a percent error metric. RESULTS: For the fan-beam data with Poisson noise, the MAP-EM OSL algorithm with the thin-plate prior showed the best result in both percent error and stability. Bilinear interpolation was the most effective method for rebinning from the fan-beam to parallel geometry when the accuracy and computation load were considered. Direct fan-beam EM reconstructions were more accurate than the standard EM reconstructions obtained from rebinned parallel data. CONCLUSION: Direct fan-beam reconstruction algorithms were implemented, which provided significantly improved reconstructions.