Clinical application of perforator vessel location guide plate for fibular musculocutaneous flaps / 口腔疾病防治

Objective@#Based on 3D printing technology, explore the precision of a perforator vessel location guide plate for fibular musculocutaneous flaps before the transplantation of fibular osteocutaneous flaps and evaluate its application effects.@*Methods@#This study was reviewed and approved by the ethics committee, and informed consent was obtained from the patients. From May 2019 to October 2022, 14 patients with jaw defects who needed to undergo fibular perforator flap transplantation at the First Affiliated Hospital of Xinjiang Medical University were selected. For the seven patients in the guide plate group, CTA was combined with Mimics software to reconstruct both lower limbs, and the perforator vessel positioning guide for locating perforator vessels was designed; the two ends of the guide plate were designed as fixed ends, with the upper end fixed to the knee joint and the lower end fixed to the ankle joint, and the guide plate was fabricated by a 3D printer. For the seven patients in the control group, a conventional handheld Doppler probe was used for perforator vessel location. The average operation time, bleeding volume, recovery time, deviation of perforator vessel location, postoperative flap-related complications, postoperative donor site shape satisfaction, and lower extremity functional scale (LEFS) score were recorded. SPSS 25.0 software was used for statistical analysis.@*Results@#The average operation time, bleeding volume, recovery time, deviation of perforator vessel location and postoperative donor site shape satisfaction were significantly better in the guide plate group than in the control group (P<0.05); moreover, the differences in postoperative flap-related complications and LEFS scores were not statistically significant (P>0.05).@*Conclusion@#Based on 3D printing technology, fibular musculocutaneous flap perforator vessels can be more accurately located using a guide plate and the knee and ankle as fixed points, and this method can effectively stabilize the guide position, prevent soft tissue offset, and improve positioning accuracy and thus deserves to be generalized.

Clinical application of lithium disilicate glass ceramic cantilever resin-bonded fixed partial denture in the restoration of single anterior tooth loss / 口腔疾病防治

Objective@#To investigate the clinical effect of lithium disilicate glass ceramic cantilever resin-bonded fixed partial dentures (CRBFPDs) on single anterior tooth loss to provide a reference for the selection of restoration methods for single anterior tooth loss.@*Methods@#This study was reviewed and approved by the Ethics Committee, and informed consent was obtained from the patients. Forty-two patients with less than two anterior teeth with monomaxillary loss were included in this study. After 6 months, 1 year, 2 years, and 3 years, the aesthetic and functional effects of the restorations and the periodontal health status were evaluated, and the visual analog scale (VAS) was used to assess patient satisfaction.@*Results@#During the observation period, the connector fractured in one case within 3 months. One case had debonded within 2 years. The aesthetic restoration effect of all lithium disilicate glass ceramic CRBFPDs was categorized as Class A. The periodontal health was good, there was no clinical absorption in the soft and hard tissues of the abutment or subbridge, periodontal status according to the evaluation indices was classified as class A, and the total satisfaction rate of the patient was 100%.@*Conclusion@#For single anterior tooth loss patients, lithium disilicate glass ceramic cantilever resin-bonded fixed partial denture can achieve the restoration effect of less invasion, better adhesion, aesthetics, comfort and good biocompatibility. With high patient satisfaction, it can be considered an ideal restoration method for replacing a single anterior tooth.

Sobrevivência em fadiga de coroas bioinspiradas bilaminadas: estudo in vitro / Fatigue survival rate of bioinspired bilaminar crowns: in vitro study

O objetivo deste estudo foi avaliar o comportamento biomecânico através da resistência à fadiga e análise por elementos finitos de coroas bioinspiradas bilaminadas com infraestruturas modificadas na superfície vestibular (Estudo A) e utilizando diferentes materiais cerâmicos com módulos elásticos distintos (Estudo B). Para isso, foram confeccionados 90 preparos para coroa total em resina epóxi G10, sobre os quais foram preparadas coroas bioinspiradas de acordo com os seguintes grupos: Estudo A - IC (infraestrutura convencional), IME (infraestrutura modificada estratificada) e IMC (infraestrutura modificada cimentada), todas confeccionadas em dissilicato de lítio (infraestrutura) + porcelana (recobrimento); Estudo B ­ DL+LEU (dissilicato de lítio + leucita), LEU+DL (leucita + dissilicato de lítio), CH+DL (cerâmica híbrida + dissilicato de lítio) e CH+LEU (cerâmica híbrida + leucita). Para o Estudo A, todas as infraestruturas foram usinadas; os recobrimentos dos grupos IC e IME foram confeccionados através da estratificação, e os recobrimentos do grupo IMC foram usinados. Já para o Estudo B, todas as peças foram usinadas, de acordo com o material cerâmico de cada grupo. Em seguida, foi realizada a cimentação adesiva dos recobrimentos sobre as infraestruturas (a depender do grupo) e das coroas sobre os preparos utilizando cimento resinoso fotopolimerizável (Variolink Esthetic LC). Após a cimentação, os espécimes foram submetidos ao teste de fadiga cíclica (10.000 ciclos, 20Hz), e como desfecho foram considerados dois eventos, em que o primeiro foi a ocorrência de trinca e/ou lascamento (evento 1) e o segundo foi a falha catastrófica do conjunto (evento 2). Os valores de carga e número de ciclos para falha em que foram observados os eventos 1 e 2 foram utilizados para realizar a análise de sobrevivência de acordo com Kaplan-Meier e Log-Rank (Mantel-Cox; 95%). As marcas de fratura e o modo de falha das coroas foram avaliados e classificados por estereomicroscópio óptico e microscópio eletrônico de varredura. Por fim, foi realizada análise por elementos finitos (FEA) para ambos os estudos, a fim de avaliar a distribuição de tensões sobre as coroas e interface adesiva. Para o Estudo A, os resultados do teste de fadiga mostraram que, considerando o evento 1 (trinca/lascamento), os grupos IC e IMC apresentaram médias de carga fadiga estatisticamente significantes entre si (733,33 N e 913,33 N, respectivamente), enquanto o grupo IME apresentou média superior (1.020 N). O mesmo foi observado para o número de ciclos em fadiga para todos os grupos. Ao considerar o evento 2 (falha catastrófica), os três grupos apresentaram médias estatisticamente semelhantes entre si (~1.028 N). Os resultados de FEA mostraram que o grupo IC concentrou maior tensão de tração do que os grupos IME e IMC. Para o Estudo B, no teste de fadiga, o grupo DL+LEU apresentou a maior média de resistência à fadiga (evento 1: 913,33 N e evento 2: 1033,33 N), enquanto todas as outras combinações de materiais cerâmicos analisadas foram estatisticamente semelhantes entre si, considerando carga e número de ciclos. Com relação ao FEA, os grupos com cerâmica híbrida (CH+DL e CH+LEU) apresentaram menores picos de concentração de tensão na infraestrutura do que os grupos com cerâmicas vítreas (DL+LEU e LEU+DL), porém, em contrapartida, concentraram maior tensão na interface adesiva. Com isso, conclui-se que a utilização da infraestrutura modificada é uma alternativa viável e promissora para tratamentos reabilitadores, apresentando sobrevivência em fadiga e distribuição de tensões satisfatórias. Além disso, a combinação entre uma infraestrutura de dissilicato de lítio e recobrimento de cerâmica a base de leucita corresponde a melhor abordagem considerando a infraestrutura modificada.(AU)

The objective of this study was to evaluate the biomechanical behavior through fatigue resistance and finite element analysis of bilaminar bioinspired crowns with modified infrastructures on the buccal surface (Study A) and using different ceramic materials with different elastic moduli (Study B). For this, 90 preparations were made for a full crown in G10 epoxy resin, on which bioinspired crowns were prepared according to the following groups: Study A - CI (conventional infrastructure), SMI (stratified modified infrastructure) and CMI (cemented modified infrastructure ), all made of lithium disilicate (infrastructure) + porcelain (veneer); Study B ­ LD+LEU (lithium disilicate + leucite), LEU+LD (leucite + lithium disilicate), HC+LD (hybrid ceramic + lithium disilicate) and HC+LEU (hybrid ceramic + leucite). For Study A, all infrastructures were machined; the coverings of the CI and SMI groups were made through stratification technique, and the veneers of the SMI group were machined. For Study B, all pieces were machined, according to the ceramic material of each group. Then, the veneers were cemented into their infrastructures (depending on the group) and crowns were cemented into preparations using light-cured resin cement (Variolink Esthetic LC). After cementing, the specimens were subjected to the cyclic fatigue test (10,000 cycles, 20Hz), and as an outcome two events were considered: the occurrence of cracking and/or chipping (event 1) and catastrophic failure (event 2). The load (N) and number of cycles to failure in which events 1 and 2 were observed were used to perform the survival analysis according to Kaplan-Meier and Log-Rank (Mantel- Cox; 95%). The fracture marks and failure mode of the crowns were evaluated and classified by optical stereomicroscope and scanning electron microscope. Finally, finite element analysis (FEA) was performed for both studies in order to evaluate the stress distribution over the crowns and adhesive interface. For Study A, the results of the fatigue test showed that, considering event 1 (cracking/chipping), the CI and CMI groups presented average to failure that were statistically significant compared to each other (733.33 N and 913.33 N, respectively), while the SMI group showed higher averages (1,020 N). Same pattern was observed for the number of cycles under fatigue for both groups. When considering event 2 (catastrophic failure), the three groups presented statistically similar means (~1,028 N). The FEA results showed that the CI group concentrated greater tensile stress than the CMI and SMI groups. For Study B, in the fatigue test, the LC+LEU group presented the highest average fatigue resistance (event 1: 913.33 N and event 2: 1033.33 N), while all other combinations of ceramic materials analyzed were statistically similar to each other, considering load and number of cycles. Regarding FEA, the groups with hybrid ceramics (HC+LC and HC+LEU) showed lower stress concentration peaks in the infrastructure than the groups with glass ceramics (LC+LEU and LEU+LC), however, on the other hand, concentrated greater tension at the adhesive interface. With this, it is concluded that the use of modified infrastructure is a viable and promising alternative for oral rehabilitation treatments, presenting satisfactory fatigue survival and adequate stress distribution. Furthermore, the combination of a lithium disilicate infrastructure and a leucite-based ceramic coating corresponds to the best approach considering the modified infrastructure.(AU)

Aniridic scleral fixation of intraocular lens: The answer to vision loss with photophobia!

Background: Aniridia is defined as missing iris tissue which can be partial, subtotal, or total. Characteristic clinical symptoms include photophobia and decreased visual acuity due to an increased light perception. In addition to this, disturbing cosmetic problems are prevalent. Even after implantation of an intraocular lens, patients often tend to be unsatisfied. Purpose: The answer to this problem lies in the implantation of an aniridic scleral fixation of intraocular lens (SFIOL), which has a central optical axis that acts as the refractive lens and a peripheral rim of a hyperpigmented area that mimics the iris and hence reduces photophobia. The purpose of the video was to demonstrate the use of black diaphragm intraocular lens (BDIOL) implantation, its surgical steps, and its outcomes. Synopsis: We report one such case where a young patient presented with post?traumatic aniridia with subluxated total cataract and spillover vitreous hemorrhage. He was subjected to a vitrectomy, cataract removal, and placement of an aniridic SFIOL with prolene 9?0 using the four?point fixation method. This gave an extremely gratifying outcome and solved both problems, that is, vision and photophobia. Highlight: Before implantation of the SFIOL, the patients had reduced visual acuity from aphakia and intolerable glare from aniridia. In this case?based approach and with relevant example, we tried to provide a solution for tricky scenarios like co?existing traumatic cataract and traumatic aniridia. The patient showed improved visual acuity and marked glare reduction after black diaphragm SFIOL implantation.

Tempo de tratamento ortodôntico com aparelhos autoligados: revisão de literatura

Introdução: Atualmente, braquetes autoligados têm sido sugeridos para reduzir o tempo de tratamento na Ortodontia. Objetivo: Dessa maneira, o presente estudo objetivou revisar a literatura acerca do tempo de tratamento com esses braquetes, em comparação com outros braquetes e tratamentos sugeridos. Revisão de literatura: Foi realizada pesquisa bibliográfica de caráter descritivo, que compreendeu o levantamento de referencial teórico na base de dados eletrônica Medline ­ PubMed. A seleção de artigos foi feita a partir dos títulos e resumos e a revisão compreendeu 4 artigos publicados na língua inglesa no período de 2019 a 2023. Conclusão: Há uma escassez de estudos clínicos envolvendo essa temática e o tratamento ortodôntico com aparelhos autoligados parece apresentar menor tempo de tratamento em comparação com aparelhos fixos tradicionais. No entanto, os estudos não mostraram diferenças estatisticamente significativas na redução desse tempo. Pode-se sugerir que mais estudos clínicos sejam conduzidos no intuito de elucidar essa questão.

Introduction: Currently, self-ligating brackets have been suggested to reduce treatment time in Orthodontics. Objective: Therefore, the present study aimed to review the literature about the treatment time with these brackets, in comparison with other brackets and suggested treatments. Literature review: Descriptive bibliographical research was carried out, which included the survey of theoretical references in the electronic database Medline ­ PubMed. The selection of articles was made based on titles and abstracts and the review comprised 4 articles published in the English language from 2019 to 2023. Conclusion: there is a shortage of clinical studies involving this topic and orthodontic treatment with self-ligating appliances seems to present shorter treatment time compared to traditional fixed appliances. However, the studies did not show statistically significant differences in reducing this time. It can be suggested that more clinical studies be conducted to elucidate this issue.

Invitro Comparative Analysis of the Flexural Strength of 4 Different Commercially Available Provisional Materials Used in Fixed Partial Dentures – An Original Research

Background: Provisional Prosthesis in fixed partial dentures are subjected to Flexure under stress. Selection of appropriate material for fabrication of Provisional is of utmost importance as the Provisional prosthesis has to remain in function till definitive prosthesis is delivered. Material & Methods: Bar type specimens of four different commercially available brands for provisional restorations fabricated according to ADA specification No. 27 and immersed in artificial saliva. The specimens were fractured under 3-point loading test. Results: The flexural strength ranged between 60 to 110 Mpa. BisGMA Auto polymerizing composite resin from Dentsply Caulk shows the highest flexural strength. Conclusion: Within the limitations of this study, the flexural strengths were material specific rather than category one. The BisGMA composite based resin shows significantly higher flexural strength over other materials

Novel custom designed toric piggyback intraocular lens for the correction of residual postoperative astigmatism

We report the outcomes of a custom-designed toric piggyback intraocular lens in a patient with high postoperative residual astigmatism. A 60-year-old male patient underwent customized toric piggyback IOL for postoperative residual astigmatism of 13 D, with follow-up examinations for IOL stability and refractive outcomes. The refractive error stabilized at two months and remained stable at one year, with a correction of nearly 9 D of astigmatism. The IOP remained within normal limits, and there were no postoperative complications. The IOL remained stable in the horizontal position. To our knowledge, this is the first case report of correction of unusually high astigmatism by a novel smart toric design of piggyback IOL.

PRESCRIBING PATTERN OF DRUGS IN OUTPATIENT DEPARTMENT IN TERTIARY CARE HOSPITAL

Aim: The study was conducted to assess the prescribing behaviour for antimicrobials and various groups of drugs in tertiary care hospital in Puducherry. Prescription audit was done. Total 500 presc Method: riptions were analysed for sex wise distribution, no of patients for specific age group, antimicrobials prescribed in generic name, percentage of antibiotics, antacids, NSAIDs and multivitamins, among the prescribed drugs, groups of antibiotics, drugs prescribed from National List of Essential Medicines (2022), use of fixed drug combinations, injectable preparations if any. Results: Demographic analysis showed that out of 500 patients in OPD, most were female (53%) and in the age group between 41 to 60 years. In 500 number of prescriptions,9.96% of antibiotics were prescribed; fluoroquinolones (5.42%) were prescribed more from antibiotics followed by extended spectrum penicillin (1.64%).14.78%of antacids were prescribed; PPIs (11.28%) were prescribed more from antacids.21.63% of NSAIDs were prescribed.11.66% were prescribed in generic names,65.44% drugs were prescribed from National List of Essential Medicines (2022),15.88% of FDCs were prescribed,6.13% of injectable preparations were prescribed. The rational use of antimicrobial agents is one of the main contribut Conclusion: ors to control worldwide emergence of bacterial resistance, side effects and reduced cost of the treatment.

Efficacy of fixed duration multidrug therapy for the treatment of multibacillary leprosy: A prospective observational study from Northern India

Background: In endemic regions of several countries, the prevalence of leprosy has not come down to the level of elimination. On the contrary, new cases are being detected in large numbers. Clinically, it is frequently noted that despite completion of multibacillary multidrug therapy for 12 months, the lesions remain active, especially in cases with high bacteriological indices. Aim: The present study focused on finding out the viable number of Mycobacterium leprae during the 12-month regimen of multibacillary multidrug therapy, at six and 12 months intervals and, attempting to determine their role in disease transmission. Methods: Seventy eight cases of multibacillary leprosy cases were recruited from leprosy patients registered at The Leprosy Mission hospitals at Shahdara (Delhi), Naini (Uttar Pradesh) and Champa (Chhattisgarh), respectively. Slit skin smears were collected from these patients which were transported to the laboratory for further processing. Ribonucleic acid was extracted by TRIzol method. Total Ribonucleic acid was used for real-time reverse transcription-polymerase chain reaction (two-step reactions). A standard sample with a known copy number was run along with unknown samples for a reverse transcription-polymerase chain reaction. Patients were further assessed for their clinical and molecular parameters during 6th month and 12th month of therapy. Results: All 78 new cases showed the presence of a viable load of bacilli at the time of recruitment, but we were able to follow up only on 36 of these patients for one year. Among these, using three different genes, 20/36 for esxA, 22/36 for hsp18 and 24/36 for 16S rRNA cases showed viability of M. leprae at the time of completion of 12 months of multidrug therapy treatment. All these positive patients were histopathologically active and had bacillary indexes ranging between 3+ and 4+. Patients with a high copy number of the Mycobacterium leprae gene, even after completion of treatment as per WHO recommended fixed-dose multidrug therapy, indicated the presence of live bacilli. Limitations: Follow up for one year was difficult, especially in Delhi because of the migratory nature of the population. Patients who defaulted for scheduled sampling were not included in the study. Conclusion: The presence of a viable load of bacilli even after completion of therapy may be one of the reasons for relapse and continued transmission of leprosy in the community

Role of Antihistamine in Allergic Disorders : A Review and Consensus Statements by Indian Medical Association

Background : 20-30% of the Indian population suffers from at least one allergic disease that can have an adverse impact on the quality of life of the patients. Aim : To develop expert opinion-related guidance for the diagnosis and management of allergic disorders. Methodology : An advisory board meeting (hybrid mode) was conducted with 11panel members of the Indian Medical Association (IMA). The panel members discussed issues related to the management of allergic disorders based on the Delphi method. Result : Spirometry is helpful in selected patients of allergic rhinitis where the coexistence of asthma is suspected. In patients with urticaria second-generation antihistamines are preferred for both adults and children due to their low side effects, less drug-drug interaction, anticholinergic effects, longer duration of action, and higher safety. Diagnosis of allergic contact dermatitis can be made based on occupational and exposure history. In atopic dermatitis, patient education about lifestyle changes can prevent flare-ups. In patients with asthma, patients must be educated about the use of the peak flow meter. The diagnosis of food allergy can be made by correlating the food intake timing withthe patient history and the results of allergy testing. Allergic drug reactions can be treated with oral antihistaminic drugs, emollients, and if needed topical corticosteroids. Conclusion : The diagnosis of allergic disorders requires the clinician to consider the clinical presentation, patient history, presence of triggers, and comorbid conditions. Patient education and the new generation of antihistaminic drugs can improve the quality of life of patients with allergic disorders

Efficacy and Safety of Fixed-Dose Combination of Efonidipine and Telmisartan in Stage II Hypertensive Patients: Results from Randomized Clinical Trial

Aim: The aim of this study was to evaluate the anti-hypertensive efficacy of a fixed-dose combination (FDC) of Efonidipine 40 mg and Telmisartan 40 mg in Stage II hypertensive patients. Study Design: Multicentric, randomized, double-blind, parallel, comparative Phase III clinical trial. Methodology: This clinical trial was conducted at six geographically distributed sites across India and enrolled 240 Stage II hypertensive patients. They were randomized into two groups in a ratio of 1:1 using computer-generated block randomization to receive E+T (FDC of Efonidipine 40 mg + Telmisartan 40mg) or C+T (FDC of Cilnidipine 10 mg + Telmisartan 40 mg) group intervention once daily for a period of 90 days. The study site staff, investigator and patients were blinded to the treatment allocation. The primary endpoint of the study evaluated the mean reduction in sitting systolic BP (SBP) and diastolic BP (DBP) from baseline to day 90 whereas the secondary endpoints assessed were mean reduction in BP from baseline to day 30 & 60, patients achieving target BP (<140/90 mmHg) and the safety and tolerability of the investigational products based on the incidences of adverse events (AEs) reported. Results: A total of 118 subjects were randomized to the E+T group wherein the mean (±SD) SBP and DBP at baseline was 167.25 ± 4.68/107.26 ± 5.19 mmHg. After 30 days of treatment with the E+T group, the mean reduction in SBP/DBP of 29.37/18.06 mmHg was observed whereas at Day 60 reduction of 38.55/22.69 mmHg was seen from the baseline. At Day 90, SBP/DBP decreased to 119.41±14.99/81.67±4.29 mmHg with a mean reduction of 47.94/25.89 mmHg in the E+T group. During the study period, the difference in systolic blood pressure between the treatments with E+T and C+T was -0.48 mmHg, with the two-sided 95% confidence interval (CI) ranging from -4.54 to 3.58?mmHg. The corresponding difference in diastolic blood pressure was -0.77 (95% CI: -2.60 to 1.06) mm?Hg. The upper boundary of the 95% CI was below the margin of 10?mmHg, confirming the non-inferiority of E+T to C+T. A total of 92% of patients who had been assigned to E+T treatment achieved their target BP goal. Only one patient reported an adverse event with E+T treatment. No unexpected AEs were reported in the E+T group suggesting its good safety and tolerability. Overall, the E+T treatment was effective, safe and well-tolerated by the patients for 90 days. Conclusion: It was concluded that the FDC of Efonidipine 40 mg and Telmisartan 40 mg was efficacious in the management of Stage II hypertension.

Effects of Fretting Stimulation Amplitude on Bone Growth and Micro-Injury at the Interface Between Bone Tissues and TitaniuBead Coating / 医用生物力学

Objective To improve the performance of artificial joint at biological fixed interface by frettingmechanical stimulation. Methods Taking the bonding sample of active rat bone tissues and inactive titanium bead coating as the research object, by using the self-developed fretting mechanical stimulation test device, the effects of mechanical stimulation with different tangential fretting amplitudes on growth promotion and micro-injury of bone tissues at fixed interface were explored, and the mechanism of growth promotion and micro-injury of bonetissues on the surface of titanium bead coating under fretting stimulation was revealed. Results The mechanical stimulation group with 40 μm fretting amplitude showed the maximum interface bonding force between bone tissues and titanium bead coating. The tangential fraction force-displacement curves changed from elliptic shape to linear shape, and the bonding interface was in adhesion area, which was difficult to become loose. The bone tissues had the most complete structure, and the number of tissue cells adhering and growing on the surface of titanium bead coating was the largest, as well as the distribution range was the widest. With the increase of fretting amplitude, the promoting effect of fretting stimulation on bone growth weakened, the bonding strength between bone tissues and titanium bead coating interface gradually decreased, the internal cavity area increased, the number and proliferation activity of tissue cells decreased to varying degrees as well. Conclusions Fretting stimulation with different amplitudes can promote the growth of bone tissue and cause micro-injury at the same time, and the optimal fretting amplitude is 40 μm.

Comparison of pretreatment techniques for single-cell RNA sequencing of airway aspirate specimens / 中华微生物学和免疫学杂志

Objective:To investigate the appropriate pretreatment methods for single cell RNA sequencing of airway aspirate cells.Methods:Four fresh airway aspirate specimens were collected from four patients with acute respiratory tract infections. These specimens were digested with airway aspirate digester and prepared into single cell suspension. The cells were used for library construction directly (DE), or fixed with 10×Genomics Chromium Next GEM Single Cell Fixed RNA Sample Preparation Kit and then mixed to construct the library (DF), or cryopreserved, thawed, fixed (FF) before mixed to construct the library. All three methods were treated with oil emulsion using 10 4 cells and subjected to single-cell sequencing using the 10×Genomics platform. The number of obtained cells, data quality, annotated cell types and expression of marker genes were analyzed. Differences in the expression of highly variable genes (HVGs) of the same cell subsets obtained by the three pretreatment methods were compared using Pearson correlation. Expression of the differentially expressed genes in the same cell subpopulation obtained by different pretreatment methods was also compared. The correlation of the expression of differentially expressed genes between the same cell subsets obtained by the three pretreatment methods was analyzed by Pearson correlation. Results:The median numbers of single cells obtained using DE, FF and DF methods were 2 733, 1 140 and 5 897 ( P>0.05). The unique molecular identifiers were higher than 500. The median numbers of genes obtained using the three methods were 801, 887 and 1 259 ( P>0.05). The cells with novelty score over 0.8 accounted for 99%, 87% and 93%, respectively. There were nine cell subsets obtained by the three methods, including squamous cells, secretory cells, ciliated cells, T cells, B cells, macrophages, plasma cells and neutrophils. DF and FF methods could obtain more basal cells with specific high expression of keratin 5 than DE method. The differentially expressed and highly variable genes in the same cell subsets obtained by the three pretreatment methods showed high consistency in their expression with a significant correlation ( P<0.001). Conclusions:Under the same sequencing data volume, the quality of data obtained from fixed airway aspirate single-cell suspensions using the method of probe hybridization and transcriptome sequencing was comparable to that obtained directly from fresh cells. This method was more suitable for the pretreatment of clinical samples used for single-cell RNA sequencing.

Analysis of dosimetric differences between active control and passive tracking of jaws / 中国辐射卫生

Objective To analyze the effect of the fixed-jaw technique on dosimetric parameters during dynamic intensity-modulated radiotherapy (DIMRT) planning. Methods Ten patients each with nasopharyngeal carcinoma, postoperative cervical cancer, and right breast cancer after radical surgery were selected for this study; all patients underwent DIMRT in our hospital in 2020. After administration at the prescribed dose, two methods were used to design the radiotherapy plan for each patient: split-field technique (SFT) and fixed-jaw technique (FJT). The two plans were compared for the differences in the dosimetric parameters and plan verification pass rate. Results Compared with SFT, FJT showed significant decreases (P <0.05) in the following parameters for patients with nasopharyngeal carcinoma, postoperative cervical cancer, and right breast cancer after radical surgery: number of radiation fields (down by 41.5%, 47.3%, and 34.9%, respectively, t = 7.954, 24.2, and 4.949, respectively), total number of monitor units (MUs) (down by 5.6%, 5.3%, and 13.5%, respectively, t = 3.211, 2.423, and 5.481, respectively), and actual beam-on time (down by 25.3%, 23.8%, and 13.6%, respectively, t = 5.814, 9.208, and 5.655, respectively). There were significant differences in some of the dosimetric parameters for all three types of cancer patients between the two plans (P <0.05). There were no significant differences in the plan verification pass rate (P >0.05). Conclusion FJT can reduce the total number of MUs and actual beam-on time while meeting the requirements for clinically prescribed doses in DIMRT planning.

Alignment efficiency and three-dimensional assessment of root resorption after alignment with conventional and copper-nickel-titanium archwires: A randomized controlled trial

ABSTRACT Objective: To compare alignment efficiency and root resorption between nickel-titanium (NiTi) and copper-nickel-titanium (CuNiTi) archwires after complete alignment in mandibular anterior region. Methods: In this two-arm parallel single-blind randomized controlled trial, forty-four patients with Class I malocclusion with mandibular anterior crowding were recruited form orthodontic clinic of All India Institute of Medical Sciences (Jodhpur, India). Patients were randomly allocated into NiTi and CuNiTi groups, with a 1:1 allocation. Alignment was performed using 0.014-in, 0.016-in, 0.018-in, 0.019x0.025-in archwire sequence in the respective groups, which terminated in 0.019 x 0.025-in stainless-steel working archwire. The primary outcome was alignment efficiency, measured on study models from baseline (T0) to the first, second, third, fourth and fifth-month (T5). Secondary outcome was root resorption, measured from CBCT scans taken at T0 and T5. Mixed-factorial ANOVA was used to compare Little's Irregularity Index (LII). For assessing the proportion of patients with complete alignment at the end of each month, Kaplan-Meier survival curve was built and time to treatment completion was compared between groups using log rank test. Paired t-test was used to assess external apical root resorption (EARR) within groups, whereas independent t-test was used to evaluate LII and EARR between the groups. Results: Twenty-two patients were recruited in each group. One patient was lost to follow-up in the CuNiTi group. No statistically significant differences were observed in alignment efficiency between the groups (p>0.05). Intergroup comparison revealed that the changes in root measurement in three-dimensions were not statistically significant (p>0.05), except for mandibular right central incisor, which showed increased resorption at root apex in NiTi group (p<0.01). Conclusion: The two alignment archwires showed similar rate of alignment at all time points. Root resorption measurement did not differ between the NiTi and CuNiTi groups, except for the mandibular right central incisor, which showed more resorption in NiTi group.

RESUMO Objetivo: Comparar os fios de níquel-titânio (NiTi) e de cobre-níquel-titânio (CuNiTi) quanto à eficiência do alinhamento e quantidade de reabsorção radicular, após alinhamento completo dos dentes da região anterior inferior. Métodos: Neste estudo clínico randomizado, cego, paralelo, de dois braços, quarenta e quatro pacientes com má oclusão Classe I e apinhamento anterior inferior foram recrutados na clínica ortodôntica do All India Institute of Medical Sciences (Jodhpur, India). Os pacientes foram alocados aleatoriamente nos grupos NiTi e CuNiTi, na proporção de 1:1. O alinhamento foi realizado usando a sequência de fios 0,014", 0,016", 0,018" e 0,019" x 0,025" nos respectivos grupos, finalizando com o arco de trabalho 0,019" x 0,025" de aço inoxidável. O desfecho primário foi a eficiência do alinhamento, medida nos modelos de estudo nos tempos inicial (T0) e após um, dois, três, quatro e cinco meses (T5). O desfecho secundário foi a reabsorção radicular, medida a partir de tomografias computadorizadas realizadas em T0 e T5. ANOVA fatorial mista foi utilizada para comparar o Índice de Irregularidade de Little (IIL). Para avaliar a proporção de pacientes com alinhamento completo ao fim de cada mês, foi construída uma curva de sobrevida pelo método de Kaplan-Meier, e o tempo até o fim do tratamento foi comparado entre os grupos por meio do teste log-rank. Um teste t pareado foi utilizado para avaliar a reabsorção radicular apical externa (RRAE) dentro dos grupos, enquanto um teste t independente foi utilizado para avaliar o IIL e a RRAE entre os grupos. Resultados: Vinte e dois pacientes foram recrutados em cada grupo. Um paciente perdeu o acompanhamento no grupo CuNiTi. Não foram observadas diferenças estatisticamente significativas entre os grupos quanto à eficiência do alinhamento (p>0,05). A comparação intergrupos revelou que as alterações na RRAE medida em três dimensões não foram estatisticamente significativas (p>0,05), exceto para o incisivo central inferior direito, que apresentou aumento da RRAE no grupo NiTi (p<0,01). Conclusão: Os dois tipos de fios de alinhamento apresentaram taxa de alinhamento semelhante em todos os momentos. A medida da reabsorção radicular não diferiu entre o grupo NiTi e CuNiTi, exceto para o incisivo central inferior direito, que apresentou maior reabsorção no grupo NiTi.

Estudo da mortalidade infantil nos estados brasileiros utilizando aplicação de dados em painel / Study of child mortality in brazilian states using panel data application / Estudio de mortalidad infantil en estados brasileños mediante aplicación de datos de panel

Este trabalho tem como objetivo determinar uma relação linear entre a Taxa de Mortalidade Infantil (TMI) e um conjunto de variáveis socioeconômicas observadas por unidades federativas no período de 2005 à 2010 utilizando o modelo de dados em painel de efeitos fixo e aleatório. Metodologia: trata-se de um estudo descritivo com abordagem quantitativa, com utilização dos Sistema de Informação sobre Mortalidade (SIM) e o Sistema de Informações sobre Nascidos Vivos (SINASC) e em seguida utilizou-se o software R para realizar esta análise de dados com a função plm. Resultados: os estudos mostram que o modelo mais adequado é o de efeito fixo com transformação logarítmica nas variáveis independentes e na variável dependente que foram as seguintes: TMI, taxa de analfabetismo, PIB per capita, proporção pessoas com baixa renda, percentual da população servida por rede de abastecimento de água e a proporção da população servida por coleta de lixo. Conclusão: As variáveis independentes que causam impacto significativo na TMI são taxa de analfabetismo, PIB per capita e proporção de pessoas com baixa renda.

This work aims to determine a linear relationship between the Infant Mortality Rate (IMR) and a set of socioeconomic variables observed by federative units in the period from 2005 to 2010 using the fixed and random effects panel data model. Methodology: this is a descriptive study with a quantitative approach, using the Mortality Information System (SIM) and the Live Birth Information System (SINASC) and then using the R software to perform this data analysis with the plm function. Results: studies show that the most appropriate model is the fixed effect model with logarithmic transformation in the independent variables and the dependent variable, which were as follows: IMR, illiteracy rate, GDP per capita, proportion of people with low income, percentage of the population served by water supply network and the proportion of the population served by garbage collection. Conclusion: The independent variables that have a significant impact on IMR are the illiteracy rate, GDP per capita and the proportion of people with low income.

Este trabajo tiene como objetivo determinar una relación lineal entre la Tasa de Mortalidad Infantil (TMI) y un conjunto de variables socioeconómicas observadas por las unidades federativas en el período 2005 a 2010 utilizando el modelo de datos de panel de efectos fijos y aleatorios. Metodología: se trata de un estudio descriptivo con enfoque cuantitativo, utilizando el Sistema de Información de Mortalidad (SIM) y el Sistema de Información de Nacidos Vivos (SINASC) y luego utilizando el software R para realizar este análisis de datos con la función plm. Resultados: los estudios muestran que el modelo más adecuado es el modelo de efectos fijos con transformación logarítmica en las variables independientes y la variable dependiente, las cuales fueron las siguientes: TMI, tasa de analfabetismo, PIB per cápita, proporción de personas con bajos ingresos, porcentaje de la población atendida por red de suministro de agua y la proporción de la población atendida por recolección de basura. Conclusión: Las variables independientes que tienen un impacto significativo en la TMI son la tasa de analfabetismo, el PIB per cápita y la proporción de personas con bajos ingresos.

The importance of properly distributing the occlusal load for the correct biomechanics of implant-supported fixed partial dentures: stress analysis in implants, prosthetic components and infrastructures / A importância da distribuição da carga oclusal de forma adequada para a correta biomecânica de prótese parcial fixa implantosuportada: análise das tensões em implantes, componentes protéticos e infraestruturas

ABSTRACT Objective: The present study analyzed the biomechanical behavior of the generated stress on the external surface of the rehabilitation elements (implants, components and infrastructures) according to different occlusion patterns on a fixed partial denture on osseointegrated implants. Method: The experimental groups varied according to the location of the occlusal load applied to the Fixed partial denture, with a total occlusal load of 750N in all groups, opting for greater loads on the occlusal table of the molar in relation to the premolar. This evaluation was performed by the finite element method with simulations by the AnsysWorkbench 16.0 Software program. Results: The results analyzed for implants and their components showed that the more posterior the occlusal loading, the greater the stress developed (group 4), always in the connection area between the prosthetic component and the implant, as this location can induce greater screw loosening. The results analyzed for the infrastructures showed that the most distributed occlusal loading possible (group 1) is the best situation for generating less stress. However, even in group 3 which obtained the highest stresses in the critical area of the prosthetic connection, the zirconia flexural strength values generated were not worrisome. Conclusion: It can be concluded that the occlusal adjustment of Fixed partial dentures are preponderant and decisive factors for correct biomechanics and preservation of the system in the long term in order to avoid possible damage and/or failures, and exert significant and notorious differences in the behavior of all structures studied herein.

RESUMO Objetivo: O presente estudo analisou o comportamento biomecânico do estresse gerado na superfície externa dos elementos reabilitadores (implantes, componentes e infraestruturas) de acordo com diferentes padrões de oclusão em uma prótese parcial fixa sobre implantes osseointegrados. Métodos: Os grupos experimentais variaram de acordo com a localização da carga oclusal aplicada na Prótese Parcial Fixa, com carga oclusal total de 750N em todos os grupos, optando por cargas maiores na mesa oclusal do molar em relação ao pré-molar. Esta avaliação foi realizada pelo método dos elementos finitos com simulações pelo programa AnsysWorkbench 16.0 Software. Resultados: Os resultados analisados para os implantes e seus componentes mostraram que quanto mais posterior a carga oclusal, maior a tensão desenvolvida (grupo 4), sempre na área de conexão entre o componente protético e o implante, pois este local pode induzir maior soltura do parafuso. Os resultados analisados para as infraestruturas mostraram que a carga oclusal mais distribuída possível (grupo 1) é a melhor situação para gerar menos estresse. No entanto, mesmo no grupo 3 que obteve as maiores tensões na área crítica da conexão protética, os valores de resistência à flexão da zircônia gerados não foram preocupantes. Conclusões: Pode-se concluir que o ajuste oclusal das Próteses Parciais Fixas são fatores preponderantes e decisivos para correta biomecânica e preservação do sistema a longo prazo a fim de evitar possíveis danos e/ou falhas, e exercem diferenças significativas e notórias no comportamento de todas as estruturas aqui estudadas.

Edge level of aligners and periodontal health: a clinical perspective study in young patients

ABSTRACT Introduction: Although the superiority of clear aligners over multi-bracket appliances in keeping gingiva healthy has been suggested, the possible benefits of one aligner design over another have not yet been investigated, especially with regard to the vestibular edge. Objective: The aim of this study was to measure several periodontal indexes in adolescents undergoing orthodontic treatment with aligners, comparing two different types of rim. Methods: The study involved 43 patients aged between 14 and 18 years. The periodontal health was assessed using plaque index (PI), gingival index (GI), and gingival bleeding index (GBI), at the start of the treatment with aligners (T0), with a vestibular rim (VR) reaching up to 3 mm beyond the gingival margin. Three months later (T1), aligners were set to obtain a juxtagingival rim (JR) on the second quadrant and VR on the first quadrant. The periodontal indexes were measured again, both at T1 and then three months later (T2). Results: Intra-quadrant comparisons revealed a statistically significant worsening of the periodontal indexes only for the second quadrant (p<0.05), at T1 (GI), and especially at T2 (PI, GI, GBI), while no statistically significant changes were found for the first quadrant. Conclusions: More severe mechanical irritation, especially during insertion and removal of the aligner, can explain the worsening inflammatory indexes with the JR. In addition, the pressure exerted by the JR on the gingival sulcus seemed to facilitate plaque deposition, whereas the VR had a protective effect, reducing the risk of mechanical trauma.

RESUMO Introdução: Embora se alegue uma superioridade dos alinhadores transparentes sobre os aparelhos multibraquetes em manter a gengiva saudável, ainda não foram investigados os possíveis benefícios de um modelo de alinhador sobre outro, especialmente no que diz respeito à borda vestibular. Objetivo: O objetivo deste estudo foi medir vários índices periodontais em adolescentes submetidos a tratamento ortodôntico com alinhadores, comparando dois tipos diferentes de borda. Métodos: O estudo envolveu 43 pacientes com idade entre 14 e 18 anos. A saúde periodontal foi avaliada por meio do índice de placa (IP), índice gengival (IG) e índice de sangramento gengival (ISG), ao início do tratamento com alinhadores (T0), com borda vestibular (BV) estendendo-se até 3 mm além da margem gengival. Três meses depois (T1), os alinhadores foram ajustados para se obter uma borda justagengival (BJ) no segundo quadrante e BV no primeiro quadrante. Os índices periodontais foram medidos novamente tanto em T1 quanto três meses depois (T2). Resultados: As comparações intraquadrantes revelaram uma piora estatisticamente significativa nos índices periodontais apenas para o segundo quadrante (p<0,05), em T1 (IG) e especialmente em T2 (IP, IG, ISG), enquanto nenhuma mudança estatisticamente significativa foi encontrada para o primeiro quadrante. Conclusões: Irritações mecânicas mais intensas, principalmente durante a inserção e remoção do alinhador, podem explicar a piora dos índices inflamatórios com a BJ. Além disso, a pressão exercida pela BJ no sulco gengival pareceu facilitar a deposição de placa, enquanto a BV teve um efeito protetor, reduzindo o risco de trauma mecânico.

Comparison of multistranded wire and fiber-reinforced composite retainers effects on periodontium: A randomized clinical trial

ABSTRACT Introduction: Fixed orthodontic retainers are very important for treatment stability; however, adverse effects on the health of periodontium can be caused as a result of deposition of plaque and calculus. Objectives: To compare and determine the effects of two mandibular fixed lingual retainers on the periodontal status, and to test the null hypothesis that there would be no significant difference on the periodontium health between the patients using fiber-reinforced composite (FRC) or multistranded wire (MSW) fixed retainers. Methods: A total of 60 subjects were recruited, out of which 6 were excluded and 2 dropped out during the study. Hence, 52 subjects with mean age of 21.5 ± 3.6 years were included in the study. The sample was composed by 8 males (15.4%) and 44 females (84.6%). The participants were randomly divided into two groups: Group 1 received fiber-reinforced composite retainer, while Group 2 received multistranded wire retainer. After insertion, plaque index, calculus index, gingival index and bleeding on probing were compared, after three months (T1), six months (T2), nine months (T3) and twelve months (T4), using Mann-Whitney test with p-value ≤ 0.05 as significant. Results: It could be seen that the health of periodontium deteriorated with the passage of time from T1 to T4 in both group of retainers. However, no statistically significant differences were found between the two groups (p> 0.05). Conclusion: The results of the study indicate that there was no significant difference on the health of periodontium between the patients with FRC and MSW fixed retainers, hence, the null hypothesis was accepted.

RESUMO Introdução: As contenções ortodônticas fixas são muito importantes para a estabilidade do tratamento; no entanto, elas podem causar efeitos adversos na saúde do periodonto, como resultado da deposição de placa e cálculo. Objetivos: Comparar e determinar os efeitos na saúde periodontal de duas contenções inferiores coladas por lingual, e testar a hipótese nula de que não haveria diferença significativa na saúde periodontal entre os pacientes usando contenções fixas de compósito reforçado com fibra (FRC) ou de fio multitrançado (MSW). Métodos: No total, 60 indivíduos foram recrutados, dos quais 6 foram excluídos e 2 desistiram durante o estudo. Assim, foram incluídos no estudo 52 indivíduos com média de idade de 21,5 ± 3,6 anos. A amostra foi composta por 8 homens (15,4%) e 44 mulheres (84,6%). Os participantes foram divididos aleatoriamente em dois grupos: O Grupo 1 recebeu contenção de compósito reforçado com fibra, enquanto o Grupo 2 recebeu contenção de fio multitrançado. Após três meses (T1), seis meses (T2), nove meses (T3) e doze meses (T4) da colagem, foram comparados os índices de placa e de cálculo, índice gengival e sangramento à sondagem, usando o teste de Mann-Whitney com p ≤ 0,05 como significativo. Resultados: Pôde-se observar que a saúde periodontal piorou com o passar do tempo, de T1 a T4, em ambos os grupos de contenções. No entanto, não foram encontradas diferenças estatisticamente significativas entre os dois grupos (p> 0,05). Conclusão: Os resultados do estudo indicam que não houve diferença significativa na saúde periodontal entre os pacientes com contenções fixas FRC e MSW; portanto, a hipótese nula foi aceita.

Treatment effects and lip profile changes following premolars extraction treatment vs fixed functional treatment in Class II division 1 malocclusion: A randomized controlled clinical trial

ABSTRACT Objective: The objective of this two-arm parallel randomized controlled trial was to evaluate the treatment effects and lip profile changes in skeletal Class II patients subjected to premolars extraction treatment versus fixed functional treatment. Methods: Forty six subjects fulfilling inclusion criteria were randomly distributed into Group PE (mean age 13.03±1.78 years) and Group FF (mean age 12.80±1.67 years) (n=23 each). Group PE was managed by therapeutic extraction of maxillary first premolars and mandibular second premolars, followed by mini-implant-supported space closure; and Group FF, by fixed functional appliance therapy. Skeletal, dental, and soft-tissue changes were analyzed using pre and post-treatment lateral cephalograms. Data obtained from this open label study was subjected to blind statistical analysis. Results: Extraction treatment resulted in greater increase of nasolabial angle (NLA: 3.1 [95% CI 2.08, 4.19], p<0.001), significant improvement of upper lip (UL-E line: -2.91 [95% CI -3.54, -2.28], p<0.001, UL-S line: -2.50 [95% CI -2.76, -2.24], p<0.001, UL-SnPog': -2.32 [95% CI -2.90, -1.74], p<0.01) and lower lip position (LL-E line: -0.68 [95% CI -1.36, 0.00], p<0.01, LL-S line: -0.55 [95% CI -1.11, 0.02], p<0.01, and LL-SnPog': -0.64 [95% CI -1.20, -0.07], p<0.01), lip thickness (UL thickness: 2.27 [95% CI 1.79, 2.75], p<0.001; LL thickness: 0.41 [95% CI -0.16, 0.97], p<0.01), upper lip strain (UL strain: -2.68 [95% CI -3.32, -2.04], p<0.001) and soft tissue profile (N'-Sn-Pog': 2.68 [95% CI 1.87, 3.50], p<0.01). No significant difference was observed between the groups regarding skeletal changes in the maxilla and mandible, growth pattern, overjet, overbite, interincisal angle and soft tissue chin position (p>0.05). Premolar extraction treatment demonstrated significant intrusion-retraction of maxillary incisors, better maintenance of maxillary incisor inclination, and significant mandibular molar protraction; whereas functional treatment resulted in retrusive and intrusive effect on maxillary molars, marked proclination of mandibular anterior teeth, and significant extrusion of mandibular molars. Both treatment modalities had similar treatment duration. Implant failure was seen in 7.9% of cases, whereas failure of fixed functional appliance was observed in 9.09% of cases. Conclusions: Premolar extraction therapy is a better treatment modality, compared to fixed functional appliance therapy for Class II patients with moderate skeletal discrepancy, increased overjet, protruded maxillary incisors and protruded lips, as it produces better dentoalveolar response and permits greater improvement of the soft tissue profile and lip relationship.

RESUMO Objetivo: O objetivo desse estudo randomizado controlado paralelo de dois braços foi avaliar os efeitos do tratamento e as mudanças no perfil labial em pacientes esqueléticos Classe II submetidos a tratamento com extração de pré-molares (EP) versus tratamento funcional fixo (FF). Métodos: Quarenta e seis indivíduos que preencheram os critérios de inclusão foram distribuídos aleatoriamente em Grupo EP (idade média 13,03±1,78 anos) e Grupo FF (idade média 12,80±1,67 anos) (n=23 cada). O grupo EP foi tratado com extração dos primeiros pré-molares superiores e segundos pré-molares inferiores, seguida de fechamento do espaço com ancoragem em mini-implantes; e o Grupo FF, com tratamento usando aparelhos funcionais fixos. As alterações esqueléticas, dentárias e de tecidos moles foram analisadas usando cefalogramas laterais pré e pós-tratamento. Os dados obtidos desse estudo aberto foram submetidos a análise estatística cega. Resultados: O tratamento com extrações resultou em maior aumento do ângulo nasolabial (ANL: 3,1 [IC 95% 2,08, 4,19], p<0,001), melhora significativa do lábio superior (Ls-Linha E: -2,91 [IC 95% -3,54, -2,28], p<0,001, Ls-Linha S: -2,50 [IC 95% -2,76, -2,24], p<0,001, Ls-SnPog': -2,32 [IC 95% -2,90, -1,74], p<0,01) e posição do lábio inferior (Li-Linha E: -0,68 [IC 95% -1,36, 0,00], p<0,01, Li-Linha S: -0,55 [IC 95% -1,11, 0,02], p<0,01, e Li-SnPog': -0,64 [IC 95% -1,20, -0,07], p<0,01), espessura dos lábios (espessura Ls: 2,27 [IC 95% 1,79, 2,75], p<0,001; espessura Li: 0,41 [IC 95% -0,16, 0,97], p<0,01), tensão do lábio superior (tensão Ls: -2,68 [IC 95% -3,32, -2,04], p<0,001) e perfil de tecidos moles (N'-Sn-Pog': 2,68 [IC 95% 1,87, 3,50], p<0,01). Nenhuma diferença significativa foi observada entre os grupos quanto às alterações esqueléticas na maxila e mandíbula, padrão de crescimento, sobressaliência, sobremordida, ângulo interincisal e posição dos tecidos moles do mento (p>0,05). O tratamento com extração de pré-molares demonstrou significativa intrusão-retração dos incisivos superiores, melhor manutenção da inclinação dos incisivos superiores e protração significativa dos molares inferiores; enquanto o tratamento funcional resultou em efeito retrusivo e intrusivo nos molares superiores, proclinação acentuada dos dentes anteriores inferiores e extrusão significativa dos molares inferiores. Ambas as modalidades de tratamento tiveram duração de tratamento semelhante. A falha do mini-implante foi observada em 7,9% dos casos, enquanto a falha do aparelho funcional fixo foi observada em 9,09% dos casos. Conclusões: O tratamento com extração de pré-molares é uma modalidade de tratamento melhor do que os aparelhos funcionais fixos para pacientes Classe II com discrepância esquelética moderada, sobressaliência aumentada, incisivos superiores protruídos e lábios protruídos, pois produz melhor resposta dentoalveolar e permite maior melhora do perfil dos tecidos moles e relacionamento labial.