Restoration method of original occlusal vertical distance in edentulous jaw / 口腔疾病防治

@#The loss of jaw position relationship will seriously affect the face and masticatory function of patients, and accurate restoration of vertical dimension of occlusion (OVD) is the key to occlusal reconstruction in edentulous patients. There are many methods to measure OVD in edentulous patients. In this paper, the working principle, scope of application, advantages and disadvantages, measurement methods and operation points of OVD recording method are reviewed in order to provide some reference for clinical treatment. The results show that the pre- extraction recording method is more objective and accurate, but the diagnosis model before extraction is required to accurately reflect the patients′ original OVD; the rest and stop jaw reference method is easily affected by subjective factors, and the edentulous patients with unstable jaw relationship are forbidden; the swallowing method is more subjective, especially suitable for patients with emotional tension and poor coordination; The facial landmark measurement method is more objective, but it is also affected by some subjective measurement factors. The patients with maxillofacial malformation are forbidden; the subjectivity of speech method is strong, and the accuracy of measurement results is closely related to the clinical experience of doctors, and the patients with aphasia and deafness are forbidden. X-ray cephalometric method and finger measurement method have strong objectivity. They are new measurement methods in recent years and have a bright future. Among them, finger measurement method is especially suitable for patients with maxillofacial deformity or postoperative deformity of tumor.

Different jaw positions and condylar positions in oral therapy / 口腔疾病防治

@#In the stomatognathic system, a stable jaw position is influenced by occlusion, the temporomandibular joint and neuromuscular stability. The condylar position in the glenoid fossa is closely related to the jaw position, while no consensus has been reached on the optimum jaw position and its corresponding condylar position in oral therapy. This paper summarizes the controversial opinions regarding the selection of jaw position and the corresponding condylar position in prosthetics and orthodontics, including antero-superior, antero-inferior, and therapeutic positions. Their indications, theoretical bases and clinical applications are also included. The literature review results suggest that, the antero-superior position, in other words, centric relation, should be chosen when the patient has a stable jaw position without TMD. In cases where finding an ideal antero-superior position is difficult due to hyperplasia or deformation or disarrangement of the articular disc, the antero-inferior position is recommended to alleviate symptoms and facilitate reconstruction of the TMJ to obtain good stability. Moreover, for high-angle patients with Class Ⅱ malocclusion or for patients with mild skeletal malocclusion, camouflaged orthodontic treatment combined with antero-inferior jaw repositioning through the potential of condyle remodeling can be an alternative to orthognathic surgery and can simplify the treatment plan. While the therapeutic position is specifically proposed for coping with complicated situations related to cranio-mandibular dysfunction, such as maximal intercuspal position abnormalities or deflection, muscle and TMJ dysfunction, unstable jaw position, in which changes in the original occlusion or abnormal TMJ guidance are induced, and a new intercuspal position can be established and stabilized on the basis of occlusal support and modified guidance. The therapeutic position put aside the debate regarding condylar position, however, the specific position of the condyle has not been reported in this case. This review suggests that different jaw positions and condylar positions have different scopes of application, and their clinical selection should be based on based on whether the patient′s joints have organic changes and the stability of the jaw positions should be comprehensively considered. However, the long-term effects of oral therapy based on different jaw positions need to be further verified by controlled clinical trials in the future.

The effect of the RW-splint on the position and occlusal relationship of class Ⅱ malocclusion patients with temporomandibular disorder / 口腔疾病防治

Objective@#To explore the effect of RW splints on the position and occlusal relationship of classⅡ malocclusion patients with temporomandibular disorder (TMD) to provide a basis for the diagnosis and design of this kind of patient. @*Methods @#Fifteen patients with class Ⅱ malocclusions with TMD were enrolled in this study. After 8 months of RW-splint treatment, the changes in jaw position (∠ANB, SN-MP, ∠S-G0/N-Me) and occlusal relationship (molar, cuspid teeth displacement and anterior overbite/overjet value) were recorded by a condylar displacement measuring instrument at the CR position and CO position.@*Results@#After RW-splint treatment, the mean values of ∠ANB (t=4.971, P=0.001) and ∠SN-MP (t=9.895, P ＜ 0.01) were increased in all 15 patients, and the mean value of S-G0/N-Me (t=5.342, P=0.005) was decreased. The mean values of the distal movement of the first molars on the left and right sides of the mandible were (1.57 ± 0.79) mm and (1.69 ± 1.29) mm, respectively; the mean values of the distal movement of the canines on the left and right sides of the mandible were (1.54 ± 0.50) mm and (1.51 ± 1.08) mm, respectively; and the mean values of the overbite were (1.16 ± 0.60) mm and (1.99 ± 0.85) mm, respectively. @*Conclusion@# After RW-splint treatment, the jaw rotates clockwise, and the relationship between the molars and canines changes obviously in class Ⅱ patients with TMD, which provides a reference for the diagnosis and treatment plan of this kind of patient.

Method and accuracy of determining the jaw position of repositioning splint with the aid of digital technique / 北京大学学报(医学版)

OBJECTIVE@#To establish the workflow of determining the jaw position of repositioning splint with the aid of digital technique, and to evaluate the accuracy of this workflow and compare the accuracy of raising different vertical dimensions in vitro.@*METHODS@#A volunteer was recruited. The data of full-arch scans, cone beam computed tomography (CBCT) image and ultrasonic jaw motion tracking of the volunteer were acquired. The full-arch scans were merged with the CBCT image, which were then matched to the jaw motion tracking reference system. The jaw position of repositioning splint was determined when the anterior teeth opening was 3 mm and the condyle was in centric relation of the fossa in the sagittal plane. A digital repositioning splint was designed in the software based on virtual articulator and fabricated with additive manufacturing technique. After the splint was tried in, another CBCT image was taken and a qualitative analysis was conducted to compare the position of condyle between these two CBCT images. In the in vitro study, standard dental plaster casts with resin ball markers attached to the base were mounted onto a fully adjustable articulator in the intercuspal position. The dental casts were scanned by an extraoral scanner to establish digital models. The ultrasonic jaw motion tracking device was used to obtain simulated jaw movements on the articulator, which was repeated for three times. The digital models and data of jaw movements were merged in one coordination with the aid of bite forks. The jaw position of repositioning splint was determined by adjusting data of jaw movements, each of which was used to determine three vertical jaw positions 4 mm, 5 mm, and 6 mm with the horizontal jaw position of protrusion 2 mm. The virtual articulators with differently adjusted jaw movements were applied in designing repositioning splints, and the final repositioning splints and virtual jaw relationships were exported in STL format. Then the repositioning splints were fabricated with additive manufacturing technique and tried in plaster casts on the mechanical articulator, which were scanned and the jaw relationships on the mechanical articulator were exported later. The virtual jaw relationships and scanned jaw relationships were registered according to lower models and displacement of upper models was calculated. Ball markers were fit to acquire the coordinates of centers and absolute difference values of centers along three coordinating axes X, Y, and Z were calculated. One-way analysis of variance was conducted using SPSS 18.0 software to compare deviations of the three different vertical jaw relationships in two-side test and the significance level was 0.05.@*RESULTS@#With the aid of multi-source data fusion and individualized jaw motion, the clinical workflow of determining jaw position of repositioning splint was preliminarily established. The designed jaw position was realized on the right and the condyle was more inferior than the designed position on the left. Both displacement of the upper models and absolute difference values of centers showed no significant differences (P>0.05) in different vertical jaw dimensions. The displacement of the upper models was (0.25±0.04) mm. The absolute difference values of centers along the three coordinating axes X, Y, and Z were respectively (0.08±0.01) mm, (0.30±0.02) mm, and (0.21±0.04) mm.@*CONCLUSION@#A novel method of determining the jaw position of repositioning splint with the aid of digital technique is established. It is proved to be feasible by try-in after multi-data fusion, computer-aided design and computer-aided manufacturing. As is shown in vitro, it is accurate to apply this method in adjusting jaw position. Further clinical trial will be designed to evaluate its clinical effect.

A study of lung protection in intensity?modulated radiotherapy with split field and fixed jaw techniques for peripheral lung cancer with mediastinal lymph node metastasis / 中华放射肿瘤学杂志

Objective To retrospectively design an intensity?modulated radiotherapy ( IMRT) plan with split field and fixed jaw techniques for peripheral lung cancer with mediastinal lymph node metastasis, to compare dosimetric characteristics between the IMRT plans with fixed jaw and dynamic jaw, and to study lung protection by the plan with split field and fixed jaw. Methods Treatment plans were collected from 12 patients with peripheral lung cancer and mediastinal lymph node metastasis who were treated with IMRT in our hospital. All plans used the dynamic jaw technique. The plans with split field and fixed jaw were designed based on the identical computed tomography images and planning target volume ( PTV) . Each jaw position in split field depended on each separate PTV. The prescription dose was 60 Gy in 30 fractions. 95%PTV was planned to receive 100% of the prescription dose. Dosimetric parameters of PTV, conformity index ( CI) , heterogeneity index ( HI) , number of monitor units ( MUs) , and dose?volume values of the lung and heart were obtained from dose?volume histogram. Comparison between the two plans was made by paired t test. Results Both plans met clinical requirements. There were no significant differences in D2 , D98 , CI, or HI of PTV between the two plans ( all P>005) . Compared with the dynamic jaw plan, the fixed jaw plan had MUs increased by 15%?20%( P=0010) . The V5 , V10 , V20 , V30 , and mean dose for the whole lungs were significantly lower in the fixed jaw plan than in the dynamic jaw plan ( P=0000, 0000, 0000, 0002,0000) . The V5 , V20 , and mean dose for the healthy lung were also significantly lower in the fixed jaw plan than in the dynamic jaw plan ( P=0000,0017,0000) . There were no significant differences in dose?volume values for the spinal cord or heart between the two plans ( all P>005) . Conclusions IMRT with split field and fixed jaw is recommended for patients with peripheral lung cancer and mediastinal lymph node metastasis. The therapy to a certain extent reduces low?dose volume for the lung and the incidence of radiation?induced pneumonitis.

The evaluation of reproducibility of operation plan with the comparison between STO and post-operative jaw position in orthognathic surgery

The purpose of this study is to examine reproducibility of operation plan and 3-dimentional jaw movement patterns by comparing jaw position of STO with post-operative jaw position. Twenty patients with class III dental and skeletal malocclusion who were treated with Le-Fort I osteotomy and B-SSRO were reviewed. Lateral cephalometric radiographs were taken within two weeks before operation and two days after operation. Cephalometric radiographs were compared and analyzed with orthognathic computer program 'V-Ceph(TM)'. Post-operative maxillary advancement was insufficient compared to maxillary advancement through STO. Post-operative setback movement was over compared to mandibular setback movement through STO. But statistically this is not significant. Maxillary vertical location is insignificant on the whole. Especially post-operative maxillary clockwise rotation is significant compared to maxillary rotation through STO. Post-operative maxillary clockwise rotation tendency is generally observed in all patients. So surgeons and staffs must consider this tendency when operation plan is established ans operation is being performed. Using intra or extra oral marking points, face bow, and bite plate will make exact surgery possible.

A comparative study about the position of upper and lower jaws, and first molars in normal occlusion and Angle's Class I,II,III malocclusions / 대한치과교정학회지

There has been so much controversies about the position of upper and lower jaws, and their first permanent molars in normal occlusion and Angle's class I,II,III malocclusions. So, the purpose of this study is to compare the position of upper and lower jaws, and their first molars in normal occlusion and Angle's class IIIIII malocclusions by lateral cephalometric analysis. The sample consisted of one hundred and twenty girls(thirty in each group) who had completed growth. The findings of this study were as follows: 1. In class I malocclusion, both maxilla and mandible were slightly posterior position than normal occlusion, but they showed harmonious relationship. 2. In class II malocclusion, the mandible was greatly retruded, and the maxilla was also slightly retruded to the cranial base as compared with normal occlusion. 3. In class III malocclusion, the maxilla was significantly retruded to the cranial base, but no significant difference was found in mandibular position as compared with normal occlusion. 4. The maxillary first molar was located at posterior position in class II malocclusion, and anterior position in class III malocclusion to the cranium, so that the rotation of mandible was influenced by that. 5. The mandibular first molar showed constant relationship to the mandible in all four groups, but different position to the cranial base in direct proportion to the mandibular position. 6. On the treatment planning of class II malocclusion, it seems to be better to promote the mandibular horizontal growth by inhibiting the vertical growth of maxillary molar area, and on the treatment planning of class III malocclusion, it seems to be better to promote the antero-inferior growth of maxilla and to promote the mandibular vertical growth by inducing the vertical growth of maxillary molar area.