ABSTRACT
ObjectiveTo analyze the polarized light microscopic characteristics， the composition of physical phases and their relative contents of Maifanitum from different origins， and to establish the Fourier characteristic fingerprint of Maifanitum powder crystals by X-ray diffraction（XRD）. MethodA total of 26 batches of Maifanitum samples were selected， and the microscopic characteristics of the sample powders and grinding flakes were observed by polarized light microscopy under single polarized light and orthogonal polarized light， and the main phase compositions and their relative contents were analyzed by powder crystal XRD technique， and the XRD Fourier characteristic fingerprint of Maifanitum was established. The incident light source of XRD was Cu target Kβ radiation， the light tube voltage and light tube current were 40 kV and 40 mA， respectively， the divergence slit was 1°， the scattering slit was 1°， the receiving slit was 0.2 mm， the scanning speed was 5°·min-1 with continuous scanning and scanning range of 5-90°（2θ）， and the step length was 0.02°. ResultThe polarized light micrographs of powders and grinding flakes of Maifanitum were obtained， and the main phases were plagioclase， potassium feldspar and quartz， and a few samples also contained illite， pyrite， iron dolomite， calcite， iron amphibole and chlorite， etc. The relative total content of feldspar phases was 61.9%-82.4%， and the relative content of quartz was 12.6%-33.6%. The XRD Fourier fingerprint analysis method of Maifanitum with 13 common peaks as the characteristic fingerprint information was established， and the similarity calculated by the mean correlation coefficient method was 0.920 9-0.997 7， the similarity calculated by the mean angle cosine method was 0.940 5-0.998 4， the similarity calculated by the median correlation coefficient method was 0.921 1-0.997 5， and the similarity calculated by the median angle cosine method was 0.947 5-0.998 2. ConclusionThe polarized light microscopic identification characteristics of Maifanitum are mainly plagioclase， quartz and potassium feldspar， and the technique of powder crystal XRD Fourier fingerprint analysis can be used for the identification of Maifanitum.
ABSTRACT
Mineral medicine is an indispensable part of traditional Chinese medicine and has a long history of application. Among them， mineral-based hemostatics have been widely applied for the treatment of various hemorrhagic diseases with extensive clinical experience and established efficacy. Gypsum Fibrosum （GF）， a commonly used mineral medicine in clinical， can clear away heat， and relieve anxiety and thirst. Gypsum Ustum （GU） is the processed product of GF after calcining at high temperature. It is mainly composed of anhydrous calcium sulfate （CaSO4） with the functions of moisturizing， promoting muscle growth， astringent sores and hemostasis. GU is often used externally to treat ulcer， itching， eczema， water and fire scalds， trauma bleeding， etc. Studies on the mechanism of hemostasis have shown that Ca2+ （coagulation factor Ⅳ） is involved in many key processes of the internal and external coagulation cascades and can prevent bleeding by regulating platelet activation and aggregation， and promoting the production of insoluble fibrin and the ultimate formation of a blood clot. GF and GU both contain Ca2+ which provide an important material basis of hemostatic effect for both compounds， but GU has a significant hemostatic effect， while GF has no hemostatic effect. After processing， the taste and efficacy of the GF have been obviously changed which reflects the characteristics of processing， but the processing mechanism of GU has not been fully clarified. Therefore， based on studies of GF before and after calcining， this paper focused on these aspects including calcining process， crystal form comparison， element content， efficacy comparison， and summarized various aspects of Ca2+ involved in hemostasis. In addition， the hemostatic properties of other calcium-containing mineral medicines and new calcium-containing hemostatic materials such as calcium alginate， mesoporous calcium silicate and nanogel hemostatic materials were also discussed. The paper aimed to provide a reference for elucidating processing mechanism and clinical dialectical use of GU， also to promote development of new calcium-containing hemostatic materials.
ABSTRACT
Jiangsu Province is rich in medicinal mineral resources because of its complex geological conditions. With the aid of the fourth national survey of traditional Chinese medicine resources and other projects, literature studies have found nearly 90 species of medicinal mineral resources in Jiangsu Province. Through the survey of mineral medicinal resources in this study, there were nearly 70 kinds of medicinal mineral resources in Jiangsu Province, and their utilization status was analyzed. The investigation is of great social and economic significance for carrying forward the traditional mineral medicine of the motherland, fully tapping the medicinal value of Jiangsu Province’s medicinal mineral resources and developing geological economy. At the same time, it provides reference for the formulation, promotion and production layout of Jiangsu Province’s regional mineral drug resources industrialization development plan.
ABSTRACT
BACKGROUND: This paper presents micro- and nano-fabrication techniques for leachable realgar using the extremophilic bacterium Acidithiobacillus ferrooxidans (A. ferrooxidans) DLC-5. RESULTS: Realgar nanoparticles of size ranging from 120 nm to 200 nm were successfully prepared using the highenergy ball mill instrument. A. ferrooxidans DLC-5 was then used to bioleach the particles. The arsenic concentration in the bioleaching system was found to be increased significantly when compared with that in the sterile control. Furthermore, in the comparison with the bioleaching of raw realgar, nanoparticles could achieve the same effect with only one fifth of the consumption. CONCLUSION: Emphasis was placed on improving the dissolvability of arsenic because of the great potential of leachable realgar drug delivery in both laboratory and industrial settings
Subject(s)
Arsenic/metabolism , Sulfides/metabolism , Acidithiobacillus/metabolism , Mining/methods , Arsenic/chemistry , Solubility , Sulfides/chemistry , Temperature , Nanotechnology , Nanoparticles/chemistry , ExtremophilesABSTRACT
Longgu is the fossil of ancient mammals which was used as a common kind of mineral medicine. Longgu is always used to treat neurological diseases. Currently, the quality standard of Longgu is incomplete. Moreover, because of the non-renewable nature of the resource and the increase of national protection of fossils, the clinical application of Longgu is facing a series of problems. As the discovery of the ingredient and the development of forging technology researchers launched to search the substitutes of Longgu. The article summarizes the usage and the study of Longgu, in order that we can discuss the modern usage and substitutability of Longgu.
ABSTRACT
Recent years, with the rapid development of industrialization in China, the contamination of heavy metal was worsening, and traditional Chinese medicinal materials (TCMM) were also suffered. The data were collected in the literatures in the past five years, and Green Trade Standard of Importing & Exporting Medicinal Plants & Preparations was used as the standard to evaluate the pollution conditions of lead (Pb), cadmium (Cd), mercury (Hg), arsenic (As), and copper (Cu). The five heavy metals exceeded the limits of the standard and the percentages were 9.66%, 26.35%, 13.0%, 9.32%, and 16.09%, respectively. Moreover, statistics on the residues of the heavy metals in different categories of TCMM from various origins were also carried out in this paper. The results showed that the contamination of heavy metals in TCMM differently depended on the origins and categories. Studies on the rapid detection methods and the limit standards of heavy metal should be established immediately. At the same time, the regulations should be formulated timely and supervision also should be intensified. To solve the problems of excessive amounts of heavy metals in TCMM, necessary measures should be taken to control the contamination of TCMM.
ABSTRACT
To establish seven kinds of minerals containing sulfate kind of near infrared spectral identification method of traditional Chinese medicine (TCM). 7 species of mineral medicine containing sulfate after crushing sieving, measure all the samples in 12 000-4 000 cm-1 section within the scope of the near infrared spectrum, spectrum signal by different pretreatment methods, after the screening of the different characteristics of the spectrum to extract the effective information, using cluster analysis method for qualitative identification. In 8 600-8 100 cm-1, 5 843-4 245 cm-1, 7 096-6 337 cm -1 section within the scope of the atlas signal after the vector normalization and multiple scattering correction, K-average clustering analysis to 20 batches sulfate kind of mineral medicine is divided into seven categories, the results of the analysis method and the traditional traits identification results are basically identical. This method is simple, fast, and can be used for these minerals containing sulfate class the qualitative identification and quality control of Chinese traditional medicine.