Mucoadhesive polymeric systems for vaginal drug delivery: a systemic review / Sistemas poliméricos mucoadhesivos para la liberación vaginal de fármacos: revisión sistemática

ABSTRACT Intravaginal drug administration has many advantages in comparison to other delivery routes: its local and systemic effect, lower dosages, and easiness of administration. Furthermore, makes it a reliable and comfortable way of therapy. This route can be used to prevent and treat a wide range of conditions including, sexually transmitted infections (STIs), hormonal treatment, birth control, and cancer treatment. The dosage forms may vary from ovules, tablets, rings, gels, creams, films and many more; lately adding the mucoadhesiveness to the characteristics to reduce the waste of active molecules. This review focuses on the way mucoadhesive polymeric systems have been applied in vaginal delivery. This review presents a bibliographical compilation of results from various investigations published in scientific databases: Science Direct, SciELO, and PubMed Central. Results compiled demonstrate that the intravaginal drug administration can be an alternative form of medication for women with more stable and prolonged results than traditional routes requiring lower doses and avoiding the first-pass effect.

RESUMEN La administración de fármacos por vía intravaginal cuenta con múltiples ventajas a comparación de otras rutas, puede lograr un efecto tanto local como sistémico, las dosis requeridas son menores, facilidad de administración entre otras, hacen que esta forma de administración sea confiable y cómoda. Esta vía de administración puede ser empleada para prevenir y tratar diferentes trastornos, como enfermedades de transmisión sexual, desordenes hormonales, anticonceptivos y tratamiento contra el cáncer. La presentación de las dosis puede variar, desde óvulos, tabletas, anillos, geles, cremas, películas entre otros, agregando a esta, en los últimos tiempos, la característica de mucoadhesividad para reducir el desecho de moléculas activas. Este trabajo se enfoca en las aplicaciones que han tenido los sistemas poliméricos mucoadhesivos en la vía intravaginal. La bibliografía recolectada se obtuvo de bases de datos como Science direct, SciELO, y PubMed Central. Los resultados obtenidos demuestran que la administración de fármacos por vía intravaginal puede ser una forma alternativa para medicación en mujeres, con resultados más estables y prolongados que otras rutas, requiriendo menores dosis y evitando el efecto de primer paso.

ROS-removing nano-medicine for navigating inflammatory microenvironment to enhance anti-epileptic therapy

As a neurological disorder in the brain, epilepsy is not only associated with abnormal synchronized discharging of neurons, but also inseparable from non-neuronal elements in the altered microenvironment. Anti-epileptic drugs (AEDs) merely focusing on neuronal circuits frequently turn out deficient, which is necessitating comprehensive strategies of medications to cover over-exciting neurons, activated glial cells, oxidative stress and chronic inflammation synchronously. Therefore, we would report the design of a polymeric micelle drug delivery system that was functioned with brain targeting and cerebral microenvironment modulation. In brief, reactive oxygen species (ROS)-sensitive phenylboronic ester was conjugated with poly-ethylene glycol (PEG) to form amphiphilic copolymers. Additionally, dehydroascorbic acid (DHAA), an analogue of glucose, was applied to target glucose transporter 1 (GLUT1) and facilitate micelle penetration across the blood‒brain barrier (BBB). A classic hydrophobic AED, lamotrigine (LTG), was encapsulated in the micelles via self-assembly. When administrated and transferred across the BBB, ROS-scavenging polymers were expected to integrate anti-oxidation, anti-inflammation and neuro-electric modulation into one strategy. Moreover, micelles would alter LTG distribution in vivo with improved efficacy. Overall, the combined anti-epileptic therapy might provide effective opinions on how to maximize neuroprotection during early epileptogenesis.

Application of nanotechnology in local anesthetic drug sustained release and light-responsive controlled release / 药学学报

Local anesthetic drugs are commonly used to block the conduction function of patient's nerves temporarily for anesthesia during surgery or to provide targeted analgesia after trauma. Compared with general anesthetics, local anesthetics makes less impact on the physiological status and alleviates pain complications in the presence of clear consciousness. However, its clinical application is still limited by its systemic toxicity, as well as toxicity to nerves and muscles, duration of action and lack of penetration. Nanotechnology can help it penetrate the physiological barrier, prolong the time of nerve block, and reduce toxic side effects. In addition, by building a light-responsive release system, local anesthetics can be released on demand, enhancing drug effectiveness and safety. However, in addition to the problems of poor consistency and high production costs, the system of light response release is still limited in application due to the limitation of the depth of penetration of the tissue. According to the current research progress, this paper briefly introduces and analyzes the main dosage forms, hoping to provide new ideas for the responsive release of local anesthetic drugs.

Polymeric nanocarriers for nose-to-brain drug delivery in neurodegenerative diseases and neurodevelopmental disorders

Neurodegenerative diseases are progressive conditions that affect the neurons of the central nervous system (CNS) and result in their damage and death. Neurodevelopmental disorders include intellectual disability, autism spectrum disorder, and attention-deficit/hyperactivity disorder and stem from the disruption of essential neurodevelopmental processes. The treatment of neurodegenerative and neurodevelopmental conditions, together affecting ∼120 million people worldwide, is challenged by the blood-brain barrier (BBB) and the blood-cerebrospinal fluid barrier that prevent the crossing of drugs from the systemic circulation into the CNS. The nose-to-brain pathway that bypasses the BBB and increases the brain bioavailability of intranasally administered drugs is promising to improve the treatment of CNS conditions. This pathway is more efficient for nanoparticles than for solutions, hence, the research on intranasal nano-drug delivery systems has grown exponentially over the last decade. Polymeric nanoparticles have become key players in the field owing to the high design and synthetic flexibility. This review describes the challenges faced for the treatment of neurodegenerative and neurodevelopmental conditions, the molecular and cellular features of the nasal mucosa and the contribution of intranasal nano-drug delivery to overcome them. Then, a comprehensive overview of polymeric nanocarriers investigated to increase drug bioavailability in the brain is introduced.

mRNA delivery in cancer immunotherapy

Messenger RNA (mRNA) has drawn much attention in the medical field. Through various treatment approaches including protein replacement therapies, gene editing, and cell engineering, mRNA is becoming a potential therapeutic strategy for cancers. However, delivery of mRNA into targeted organs and cells can be challenging due to the unstable nature of its naked form and the low cellular uptake. Therefore, in addition to mRNA modification, efforts have been devoted to developing nanoparticles for mRNA delivery. In this review, we introduce four categories of nanoparticle platform systems: lipid, polymer, lipid-polymer hybrid, and protein/peptide-mediated nanoparticles, together with their roles in facilitating mRNA-based cancer immunotherapies. We also highlight promising treatment regimens and their clinical translation.

Engineering a folic acid-decorated ultrasmall gemcitabine nanocarrier for breast cancer therapy: Dual targeting of tumor cells and tumor-associated macrophages

Combination of passive targeting with active targeting is a promising approach to improve the therapeutic efficacy of nanotherapy. However, most reported polymeric systems have sizes above 100 nm, which limits effective extravasation into tumors that are poorly vascularized and have dense stroma. This will, in turn, limit the overall effectiveness of the subsequent uptake by tumor cells via active targeting. In this study, we combined the passive targeting via ultra-small-sized gemcitabine (GEM)-based nanoparticles (NPs) with the active targeting provided by folic acid (FA) conjugation for enhanced dual targeted delivery to tumor cells and tumor-associated macrophages (TAMs). We developed an FA-modified prodrug carrier based on GEM (PGEM) to load doxorubicin (DOX), for co-delivery of GEM and DOX to tumors. The co-delivery system showed small particle size of ∼10 nm in diameter. The ligand-free and FA-targeted micelles showed comparable drug loading efficiency and a sustained DOX release profile. The FA-conjugated micelles effectively increased DOX uptake in cultured KB cancer cells that express a high level of folate receptor (FR), but no obvious increase was observed in 4T1.2 breast cancer cells that have a low-level expression of FR. Interestingly, in vivo, systemic delivery of FA-PGEM/DOX led to enhanced accumulation of the NPs in tumor and drastic reduction of tumor growth in a murine 4T1.2 breast cancer model. Mechanistic study showed that 4T1.2 tumor grown in mice expressed a significantly higher level of FOLR2, which was selectively expressed on TAMs. Thus, targeting of TAM may also contribute to the improved in vivo targeted delivery and therapeutic efficacy.

GSH-sensitive polymeric prodrug: Synthesis and loading with photosensitizers as nanoscale chemo-photodynamic anti-cancer nanomedicine

Precisely delivering combinational therapeutic agents has become a crucial challenge for anti-tumor treatment. In this study, a novel redox-responsive polymeric prodrug (molecular weight, MW: 93.5 kDa) was produced by reversible addition-fragmentation chain transfer (RAFT) polymerization. The amphiphilic block polymer-doxorubicin (DOX) prodrug was employed to deliver a hydrophobic photosensitizer (PS), chlorin e6 (Ce6), and the as-prepared nanoscale system [NPs(Ce6)] was investigated as a chemo-photodynamic anti-cancer agent. The glutathione (GSH)-cleavable disulfide bond was inserted into the backbone of the polymer for biodegradation inside tumor cells, and DOX conjugated onto the polymer with a disulfide bond was successfully released intracellularly. NPs(Ce6) released DOX and Ce6 with their original molecular structures and degraded into segments with low MWs of 41.2 kDa in the presence of GSH. NPs(Ce6) showed a chemo-photodynamic therapeutic effect to kill 4T1 murine breast cancer cells, which was confirmed from a collapsed cell morphology, a lifted level in the intracellular reactive oxygen species, a reduced viability and induced apoptosis. Moreover, ex vivo fluorescence images indicated that NPs(Ce6) retained in the tumor, and exhibited a remarkable in vivo anticancer efficacy. The combinational therapy showed a significantly increased tumor growth inhibition (TGI, 58.53%). Therefore, the redox-responsive, amphiphilic block polymeric prodrug could have a great potential as a chemo-photodynamic anti-cancer agent.

Development of diethylcarbamazine-loaded poly(caprolactone) nanoparticles for anti-inflammatory purpose: Preparation and characterization

Abstract Diethylcarbamazine-loaded nanoparticles were previously evaluated for their anti-inflammatory activity. However, little is known regarding their physicochemical properties. Thus, the purpose of this study was to physiochemically characterize diethylcarbamazine-loaded poly(caprolactone) nanoparticles and evaluate their in vitro cytotoxicity. All formulations were prepared using the double-emulsion method. The average particle size was in the ranged between 298 and 364 nm and the polydispersity indexes were below 0.3. The zeta potential values were marginally negative, which may be related to drug loading, as higher loading led to an increase in the modulus of the zeta potential values. Fourier transform infrared spectroscopy (FT-IR) and X-ray powder diffraction (XRD) analysis did not reveal any chemical interactions between the chemicals used and the absence of drug in crystalline form on the nanoparticle surfaces. The in vitro drug release study revealed a concentration-dependent release from the nanoparticles into the medium. The in vitro cytotoxicity assay demonstrated the biocompatibility of the blank and loaded nanoparticles. Hence, all formulations presented good physicochemical and safety properties, corroborating the in vivo anti-inflammatory activity, previously reported by our group.

Development of fluorescent- and radio-traceable T1307-polymeric micelles as biomedical agents for cancer diagnosis: biodistribution on 4T1 tumor-bearing mice

Abstract In recent years, nanocarriers have been studied as promising pharmaceutical tools for controlled drug-delivery, treatment-efficacy follow-up and disease imaging. Among them, X-shaped amphiphilic polymeric micelles (Tetronic®, poloxamines) display great potential due to their biocompatibility and non-toxic effects, among others. In the present work, polymeric micelles based on the T1307 copolymer were initially decorated with a 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY)-fluorophore in order to determinate its in vivo biodistribution on 4T1 tumor-bearing mice. However, unfavorable results with this probe led to two different strategies. On the one hand, the BODIPY-micelle-loaded, L-T1307-BODIPY, and on the other hand, the 99mTc-micelle-radiolabeled, L-T1307- 99m Tc, were analyzed separately in vivo. The results indicated that T1307 accumulates mainly in the stomach, the kidneys, the lungs and the tumor, reaching the maximum organ-accumulation 2 hours after intravenous injection. Additionally, and according to the results obtained for L-T1307- 99m Tc, the capture of the polymeric micelles in organs could be observed up to 24 hours after injection. The results obtained in this work were promising towards the development of new radiotracer agents for breast cancer based on X-shaped polymeric micelles.

Isolation and identification of early marine biofilm-forming bacteria on commercial paint surface

Aims@#To investigate early marine biofilm-forming bacterial diversity on immersed antimicrobial-free commercial paint substratum in seawater. @*Methodology and results@#Total ten bacterial strains were successfully isolated and identified by complete 16S rRNA sequencing. The isolates morphological, biochemical properties, biofilm-forming ability, extracellular polymeric substance (EPS) productivity and components were characterised. The morphological and biochemical characterization of the strains showed strains-specific variation. All isolates were strong biofilm producers with four motile strains being both flat-bottom and air-liquid-interface biofilm producers, while other strains were only air-liquid interface biofilm producer. Based on 16S rRNA, three strains were identified as Marinomonas communis, two were Marinomonas sp., while the rest were Alteromonas litorea, Alteromonas sp., Salinimonas lutimaris, Idiomarine baltica and Bacillus niabensis. The amount of EPS that the isolates produced ranged from 1.95 to 2.89 g/L and productivity of EPS was inversely correlated with the cell biomass. Analysis of the extracted EPS using attenuated total reflectance-fourier transform infrared (ATR-FTiR) showed that all isolates EPS contained carbohydrates, nucleic acid, protein, DNA/RNA and lipid. @*Conclusion, significance and impact of study@#Bacterial diversity in early stages of biofilm on the commercial paint surface was dominated by Gram-negative bacteria from Gammaproteobacteria class. Isolates with superior cell growth showed lowest EPS production. This finding was expected to provide knowledge on distribution of different marine bacterial species in the biofilm on paint coated surfaces which may beneficial to formularize a new antibiofilm paint additive.

Design and preparation of a new multi-targeted drug delivery system using multifunctional nanoparticles for co-delivery of siRNA and paclitaxel / 药物分析学报

Drug resistance is a great challenge in cancer therapy using chemotherapeutic agents.Administration of these drugs with siRNA is an efficacious strategy in this battle.Here,the present study tried to incor-porate siRNA and paclitaxel(PTX)simultaneously into a novel nanocarrier.The selectivity of carrier to target cancer tissues was optimized through conjugation of folic acid(FA)and glucose(Glu)onto its surface.The structure of nanocarrier was formed from ternary magnetic copolymers based on FeCo-polyethyleneimine(FeCo-PEI)nanoparticles and polylactic acid-polyethylene glycol(PLA-PEG)gene delivery system.Biocompatibility of FeCo-PEI-PLA-PEG-FA(NPsA),FeCo-PEI-PLA-PEG-Glu(NPsB)and FeCo-PEI-PLA-PEG-FA/Glu(NPsAB)nanoparticles and also influence of PTX-loaded nanoparticles on in vitro cytotoxicity were examined using MTT assay.Besides,siRNA-FAM internalization was investi-gated by fluorescence microscopy.The results showed the blank nanoparticles were significantly less cytotoxic at various concentrations.Meanwhile,siRNA-FAM/PTX encapsulated nanoparticles exhibited significant anticancer activity against MCF-7 and BT-474cell lines.NPsAB/siRNA/PTX nanoparticles showed greater effects on MCF-7 and BT-474 cells viability than NPsA/siRNA/PTX and NPsB/siRNA/PTX.Also,they induced significantly higher anticancer effects on cancer cells compared with NPsA/siRNA/PTX and NPsB/siRNA/PTX due to their multi-targeted properties using FA and Glu.We concluded that NPsAB nanoparticles have a great potential for co-delivery of both drugs and genes for use in gene therapy and chemotherapy.

Preparation and applications of the polymeric micelle/hydrogel nanocomposites as biomaterials / 生物医学工程学杂志

Polymeric hydrogels have been widely researched as drug delivery systems, wound dressings and tissue engineering scaffolds due to their unique properties such as good biocompatibility, shaping ability and similar properties to extracellular matrix. However, further development of conventional hydrogels for biomedical applications is still limited by their poor mechanical properties and self-healing properties. Currently, nanocomposite hydrogels with excellent properties and customized functions can be obtained by introducing nanoparticles into their network, and different types of nanoparticles, including carbon-based, polymer-based, inorganic-based and metal-based nanoparticle, are commonly used. Nanocomposite hydrogels incorporated with polymeric micelles can not only enhance the mechanical properties, self-healing properties and chemical properties of hydrogels, but also improve the

Application of polymeric porcelain color-masking cast posts in the aesthetic repair of anterior teeth: a case report / 华西口腔医学杂志

Many patients with large-area tooth defect need cast post-core crown restoration. However, the color defect of the cast post-core will affect the final restorative result, especially that of the anterior teeth. A new technology of color masking by applying CERAMAGE polymeric porcelain to the cast metal post-core surface improves the color of a full-ceramic restoration of anterior teeth and may provide a new alternative for the aesthetic repair of anterior teeth with a large area of defective tooth.

Lapatinib-loaded nanocolloidal polymeric micelles for the efficient treatment of breast cancer

This study aims at preparing and evaluating lapatinib-loaded polymeric micelles for the better treatment of breastcancer (BC). LP-loaded polymeric micelles (LP-PMs) were prepared as per our previous studies by using Soluplus®as the polymer. Therefore, we employed the lyophilization technique using mannitol as a cryoprotectant and furtherconducted in vitro and in vivo anticancer efficacy studies, in addition to our previously reported works. We found thatthe lyophilized LP-PMs were sufficiently stable and retained encapsulated drugs. Furthermore, their smooth surfacewas visualized on the atomic force microscopy. The X-ray powder diffractogram of LP-PMs showed successfulencapsulation of Lapatinib; however, the presence of few drug molecules on the surface was evidenced by energydispersive X-ray analysis. Furthermore, LP-PMs showed sustained release of drugs, with selective drug release in anacidic environment, resembling that of a tumor. The LP-PMs exhibited higher cytotoxicity against SKBr3 BC cellsand also induced effective inhibition of the growth of the tumor in vivo when compared to that of lapatinib solutionand marketed formulation. The results of this study indicate the greater potential of LP-PMs for the efficient treatmentfor BC

Preparation of polymer nanoparticles loaded with Syzygium aromaticum essential oil: an oral potential application / Preparación de nanoparticulas polimericas cargadas con aceite esencial de Syzygium aromaticum: una potencial aplicación oral

Due to the biological activities of Syzygium aromaticum essential oil, its incorporation in methacrylate polymeric (Eudragit E100) nanoparticles (NP), physical characterization, and antimicrobial essays were evaluated. The clove bears great potential for applications in dentistry. The oil was obtained by hydrodistillation and oil loaded NP using the nanoprecipitation method. Particle size and polydispersity index were determined by photon correlation spectroscopy, and physical morphology by electron microscopy. Loading capacity and in vitro eugenol release were evaluated by gas mass chromatography, and the antimicrobial activity of oil loaded-NP was calculated against Streptococcus mutans. Different chemical ingredients were characterized, and eugenol was the principal compound with 51.55%. Polymer content was directly related to NP homogenous size, which was around 150 nm with spherical morphology. A 73.2% loading capacity of eugenol was obtained. Oil loaded NP presented a fickian-type release mechanism of eugenol. Antimicrobial activity to 300 µg/mL was obtained after 24 h.

Debido a las actividades biológicas del aceite esencial de Syzygium aromaticum, se evaluó su incorporación en nanopartículas (NP) de metacrilato polimérico (Eudragit E100), su caracterización y ensayos antimicrobianos. El clavo tiene un gran potencial para aplicaciones en odontología. El aceite se obtuvo por hidrodestilación y las NP cargado de aceite utilizando el método de nanoprecipitación. El tamaño de partícula y el índice de polidispersidad se determinaron mediante espectroscopia de correlación fotónica y su morfología por microscopía electrónica. La capacidad de carga y la liberación de eugenol in vitro se evaluaron mediante cromatografía de gases en masa, y la actividad antimicrobiana se evaluó contra Streptococcus mutans. Se caracterizaron diferentes ingredientes químicos, siendo el eugenol el principal compuesto con 51.55%. El contenido de polímero se relacionó directamente con el tamaño homogéneo de NP, que fue de alrededor de 150 nm con morfología esférica. Se obtuvo un 73,2% de capacidad de carga de eugenol. El aceite cargado en NP presentó un mecanismo de liberación de eugenol de tipo fickiano. La actividad antimicrobiana a 300 µg/mL se obtuvo después de 24 h.

Development of Oral Solid Formulation for Insoluble Drugs Based on PASD Technology / 中国药学杂志

The low aqueous solubility is the main reason that for most pharmacological active ingredients are challengeable to develop into oral solid formulation. Polymeric amorphous solid dispersion(PASD) can greatly improve the apparent solubility and dissolution rate of poorly soluble drugs, has become a common technology to improve the oral bioavailability of poorly soluble drugs. However, due to the amorphous form of the drug at a high surface free energy in PASD, crystallization would occur during storage and dissolution, thereby losing its formulation advantages. The review attempts to provide a structural development approach of PASD products from the aspects of formulation and technology, in order to guide the development of stable and commercially viable PASD formulations. And the trend analysis of marketed products and patents of PASD will be discussed to understand the prospects of PASD's application in improving the bioavailability of poorly soluble oral solid formulations.

Preparation and Preliminary Evaluation of Paclitaxel-loaded TPGS-CR Polymeric Micelles / 中国药学杂志

OBJECTIVE: To prepare paclitaxel loaded D-α-tocopheryl polyethylene glycol 1000 succinate(TPGS)-modified carboxymethyl chitosan-rhein polymeric micelles (PTX/TPGS-CR PMs) and preliminarily evaluate their performance. METHODS: PTX/TPGS-CR PMs was prepared by dialysis method, and the preparation procedure of PTX/TPGS-CR PMs was optimized by single factor with the drug loading, encapsulation rate and particle size as the indicators, then the optimized preparation procedure was verified. The safety of PTX/TPGS-CR PMs was initially investigated by the hemolysis test and the vascular irritation test. The cytotoxicity of PTX/TPGS-CR PMs in Hela cells was studied by MTT assay. Cell uptake experiments were performed by laser confocal microscopy and flow cytometry to investigate the uptake of PTX/TPGS-CR PMs by Hela cells. RESULTS: The particle size and PDI of PTX/TPGS-CR PMs prepared by the optimized preparation were (197.3±4.4) nm and (0.131±0.021), respectively. The Zeta potential was (-31.8±0.5) mV. The drug loading and encapsulation efficiency were (48.20±3.03)% and (87.26±4.91)%, respectively. The hemolytic test results showed that the hemolysis rate was less than 1.71%. No obvious irritation was observed after intravenous injection. The cytotoxicity of PTX/TPGS-CR PMs in Hela cells was concentration-and time-dependent. Cell uptake experiments showed that PTX/TPGS-CR PMs could be efficiently uptake by Hela cells. CONCLUSION: The PTX/TPGS-CR PMs has high drug loading and encapsulation efficiency, good safety. And they exhibite slightly better antitumor activity in vitro than Taxol®.

Cytotoxicity and cellular uptake of paclitaxel-loaded carboxymethyl chitosan-rhein polymeric micelles in MCF-7 cells / 中国药科大学学报

@#In this study, in vitro cytotoxicity of carboxymethyl chitosan-rhein conjugate(CR conjugate)and paclitaxel-loaded carboxymethyl chitosan-rhein polymeric micelles(PTX/CR PMs)was evaluated by MTT method in MCF-7 cells. The results showed that CR conjugate displayed good security; PTX/CR PMs in 24 h showed better antitumor activity than Taxol® . Environment-responsive fluorescent probe P4 was used to determine the cellular uptake of PTX/CR PMs in MCF-7 cells. The results also showed that P4 and PTX co-loaded carboxymethyl chitosan-rhein polymeric micelles ［(P4+PTX)/CR PMs］ could be taken up by MCF-7 cells. There was no difference between(P4+PTX)/CR PMs group and(P4+PTX)/CR PMs with verapamil group, suggesting that CR PMs could protect fluorescent probe and/or drugs in their cores avoiding efflux by P-glycoprotein. These results will contribute to in vivo study of CR conjugate and PTX/CR PMs in the future.

Role of polymeric immunoglobulin receptor in the metastasis, growth, diagnosis, and treatment of hepatocellular carcinoma / 临床肝胆病杂志

Chronic inflammation of the liver is a risk factor that promotes the progression of hepatocellular carcinoma, and in the presence of viral infection, enhanced Fc receptor signal will further aggravate inflammatory response and participate in the process of canceration. Polymeric immunoglobulin receptor (pIgR) not only plays a critical role in first-line anti-infection immunity, but also promotes the metastasis and growth of early-stage hepatocellular carcinoma. Identifying pIgR as a predictive index for metastatic potential in patients with early-stage liver cancer can help to promote the stratification and treatment decisions for such patients, which has a positive significance in improving patient prognosis. Targeted inhibition of the pIgR/Yes signal cascade as a potential treatment option may provide more treatment options for controlling tumor size to allow resection or transplantation.

Polymeric micelles containing resveratrol: development, characterization, cytotoxicity on tumor cells and antimicrobial activity

Antimicrobial and antitumor activities of resveratrol, a compound found mainly in grapes, have already been demonstrated. However, its low bioavailability is a limiting factor for therapeutic application. Polymeric micelles can be an approach to solve this problem since they can encapsulate hydrophobic substances. We developed and characterized micellar formulations containing resveratrol and evaluated their cytotoxic and antimicrobial effects. The formulations were prepared by the cold dispersion method with different concentrations of F127 (5 or 10% w/w) and resveratrol (500 or 5000 µM). The formulations were characterized according to size, polydispersity index, pH, encapsulation rate and in vitro release. Cytotoxic effect was evaluated on a bladder cancer cell line and antimicrobial effect was evaluated on E. coli, S. aureus and C. albicans. One of the formulations (10% w/w of F127 and 5000 µM of resveratrol) was a monodispersed solution with high encapsulation rate, thus it was chosen for the cytotoxicity and antimicrobial assays. MS- 10+RES-3 was able to preserve the antimicrobial and cytotoxic activity of resveratrol. This is the first study that evaluated antimicrobial potential and cytotoxicity of micelles containing resveratrol on bladder cancer cells and the results showed that micellar nanostructures could ensure the maintenance of the biological activity of resveratrol.