ABSTRACT
A field experiment was conducted during kharif 2022 at College of Agriculture, Kalaburagi to evaluate the effect of dates of sowing and plant geometry on yield and economics of ricebean. The experiment was laid out in Split plot design with three replications. The experiment was comprised of two factors viz., dates of sowing in main plot with four dates i.e. second fortnight of July, first fortnight of August, second fortnight of August and first fortnight of September and spacing in sub plot with three plant geometry i.e. 30 cm x 10 cm, 45 cm x 10 cm and 60 cm x 10 cm. The results of the experiment indicated that ricebean sown during first fortnight of August recorded significantly higher seed yield and stover yield (1016 kg ha-1 and 2574 kg ha-1, respectively) besides higher gross returns (?. 63547 ha-1), net returns (?. 39300 ha-1) and Benefit Cost ratio (2.62). Among different plant geometry, 30 cm x 10 cm recorded significantly higher seed and stover yield (1009 kg ha-1 and 2302 kg ha-1, respectively) besides higher gross returns (?. 62852 ha-1), net returns (? 38205 ha-1) and BC ratio (2.55). Further, it was onpar with 45 cm x 10 cm plant geometry (989 kg ha-1, 2253 kg ha-1, ?. 61583 ha-1, ?. 37355 ha-1 & 2.54, seed yield, stover yield, gross returns, net returns & BC ratio, respectively). The interaction between dates of sowing and plant geometry on yield attributes, yield and economics was found non significant.
ABSTRACT
Aim: To assess the growth and yield of grain cowpea in response to varied doses of phosphorus (P) and potassium (K) supplemented with foliar application of nano diammonium phosphate (DAP) and potassium salt of active phosphorus (PSAP).Study Design: The field experiment was a factorial experiment, laid out in randomised block design with two levels of P, three levels of K and two sources of foliar nutrition, compared against a control, with three replications.Place and Duration of Study: The study was conducted at the Integrated Farming System Research Station, Karamana, Nedumcaud, Thiruvananthapuram, Kerala, India, during the period from December 2022 to February 2023.Methods: The study utilized PGCP-6 cowpea variety and adopted fertilizer recommendations as per KAU POP (Package of Practices Recommendations of the Kerala Agricultural University). The entire dose of FYM, P and K and half dose of nitrogen (N) were applied as basal dose. The remaining half dose of N was applied at 15 days after sowing (DAS). Additionally, foliar application of nano DAP and PSAP (each @ 0.4 %) was done at 20 DAS and 40 DAS.Results: The results of the study revealed that the treatment combination, p2k1f2 and p2k1f1 had comparable leaf area per plant and leaf area index (LAI) (at 60 DAS). The highest seed yield (1642 kg ha-1) was recorded with p2k1f2. Higher dose of P and K along with foliar application of nano DAP (0.4 % at 20 DAS and 40 DAS) had significant effect on the total DMP and haulm yield.Conclusion: Combined application full dose of N, half dose of P, full dose of K and foliar application of PSAP (0.4 %) at 20 DAS and 40 DAS could be recommended as the best treatment combination for yield enhancement in grain cowpea.
ABSTRACT
The field trial was conducted at Krishi Nagar Farm, Department of Agronomy, College of Agriculture, Jawaharlal Nehru Krishi Vishwa Vidyalaya, Jabalpur, Madhya Pradesh, India, during the kharif season of 2021. The field experiment consisted with 06 treatments and they were tested in randomized block design with 04 replications. The study revealed that maximum plant height (50.35 cm), branches per plant (5.74), effective root nodules (57), Leaf area index (4.90), dry weight plant-1(45.16 g),yields attributes parameters like seed per pod (57.74), pods per plant (2.91) as well as seed index (11.88), seed yield (1009 kg ha-1), stover yield (2087 kg ha-1)and HI (32.59%)of soybean was found higher under 100 % Organic NM followed by 25% Organic + NF inputs BJG +25% Inorganic NM.
ABSTRACT
The current study was conducted in Rabi 2021- 2022 at Instructional Farm, Rajasthan College of Agriculture, MPUAT, Udaipur to estimate the association among yield components and their direct and indirect influence on grain yield of bread wheat. For the overall traits under investigation, significant genotypic differences were found indicating the presence of huge amount of variation among studied genotypes. At both the genotypic and phenotypic levels, there was positive and significant correlation between grain yield and days to 50% heading, plant height, length of main spike, number of spikelet’s per spike, number of grains per spike, grain weight per spike and biological yield per plant. Plant height had the greatest positive direct impact on grain production per plant followed by biological yield per plant, number of grains per spike, days to maturity and 1000-grain weight. It is, therefore, feasible to increase the grain yield per plant in bread wheat by taking into account certain traits viz., plant height, biological yield per plant, number of grains per spike.
ABSTRACT
Quinoa, an ancient crop to contribute to world food security and it is a crop with high potential to contribute to food security in various Regions worldwide, especially in those countries where the population does not have access to protein sources or where production conditions are limited by low humidity, reduced availability of inputs, and aridity. An attempt was done at ARS, Ananthapuramu to study the feasibility to raise the quinoa under rainfed conditions during kharif, 2015 and 2016 under RBD with 6 treatments in four replications. The crop was grown on 24th standard week and harvested at 40th standard week. Among the different varieties highest yield was recorded with under transplanting with 2150 kg/ha, with water use efficiency of 7.32 kg hamm-1 with IC-411824. Further highest germination percentage was recorded with the vermicompost when compared with soil when germination was kept under trays.IC-411824 recorded highest germination percentage (98 %) with vermicompost. The seed vigour and viability characters viz., germination index, seedling length and seed vigour index was highest with IC-411824. Under transplanting all the varieties matures earlier than direct sowing. The vegetative characters viz., plant height increases from vegetative to flowering in all varieties and recorded highest with IC-411824.
ABSTRACT
This study was undertaken to determine the stability of oat genotypes for seed yield under different environmental conditions prevalent in north- western Himalayas. One hundred and twenty-one genotypes including five checks were evaluated in simple lattice design for three years (Rabi 2015-16 to 2017-18). The stability was estimated using Eberhart and Russell model for six traits viz., days to 50% flowering, days to 75% maturity, biological yield per plant, harvest index (%), 1000-seed weight (g) and seed yield per plant (g). The pooled analysis of variance showed that genotypes behaved differently for all the traits over the environments. The most stable performing genotypes identified were S8-217, UPO-119, Oats-17 and Oats-8655, respectively. However, the best performing and stable genotypes for seed yield were JPO-24 and Oat- 79. Thus, the genotypes identified as stable and well adapted over test environments could be exploited as valuable gene pool in further breeding programme, for developing stable genotypes with high yield potential or could be tested in multi-locational trials to release as a cultivar.
ABSTRACT
Safflower (Carthamus tinctorius L.) is an important oil seed crop, essential as vegetable oil for humans and feed for livestock. The experiment was conducted in a split plot design to study the effects of foliar application of nano urea and urea on safflower growth and development. The results showed that application of 100% nitrogen in the form of urea topdressing at vegetative stage and foliar spray of nano urea twice at flowering and seed filling stages significantly improved the physiological parameters viz. plant height (cm), primary branches of safflower. The CSI, RWC, Seed yield (kg/ha), 100 seed weight (g) and hull content (%) of safflower also significantly improved with 100% N and foliar spray of nano urea twice at flowering and seed filling stages. The result from the study suggests that application of urea as split doses and foliar spray of nano urea at reproductive stage is beneficial for the crop and will improve seed yield and oil quality of safflower. Foliar application of nano urea improves the nutrient uptake by the crop through its slow and controlled release of nutrients. It also helps in reducing environmental pollution due to leaching of fertilizers.
ABSTRACT
The present investigation was carried out with 78 diverse horse gram [Macrotyloma uniflorum (L.) Verdc] genotypes along with 4 checks during the late Kharif season. Data was recorded on days to 50 percent flowering, days to maturity, plant height, number of branches per plant, pod length, number of seeds per pod, number of pods per plant, pod weight (g), seed yield per plant (g), and 100-seed weight (g). Analysis of variance revealed significant differences among all the genotypes for all the characters studied. A wide range of variations had been observed for all the characters except for the number of seeds per pod. The highest coefficient of variation was observed in the number of pods per plant followed by 100 seed weight and seed yield per plant. The phenotypic coefficients of variation (PCV) were higher than the genotypic coefficient of variation (GCV) for all the traits but the differences were narrow. The highest magnitude of PCV and GCV were recorded for seed yield per plant (g) followed by pod weight (g) indicating a wide range of variation which provides a chance for yield improvement. High heritability coupled with high genetic advance was observed for plant height, number of branches per plant, number of pods per plant, pod weight, seed yield per plant, and 100 seed weight indicating additive gene action and the abundant scope for improvement in these traits through simple selection. This study provides information about the performance of the genotypes and identifies some prominent genotypes. Thirty-three genotypes recorded significantly higher seed yield per plant as compared to the best-performing check. These genotypes were IC 426292, IC 470167, IC 426471, IC 470229, IC 470206, IC 470262, IC 426464, IC 107247, IC 108076, IC 426550, IC 426540, IC 108078, IC 426537, IC 470166, IC 467865, CRHG-1, IC 426539, IC 426478, IC 426524, IC 426549, IC 426522, IC 470170, IC 261278, IC 470188, IC 426535, IC 107222, IC 226533, IC 426574, IC 426523, IC 526965, IC 426571, IC 426517 and IC 426538. These genotypes may be further used for parental selection in breeding programs for the improvement of yield and its attributes in horse gram.
ABSTRACT
A field experiment was conducted to investigate the influence of organic fertilizers and organic sprays on the productivity and economic parameters of summer greengram (Vigna radiata) cultivation. The experiment was designed as a split-plot design with three replications. The primary plots encompassed four organic fertilizer treatments: Control (M1), Farm yard manure (M2), Vermicompost (M3), and Poultry manure (M4). The sub-plots included three organic spray treatments: Control (S1), Panchagavya (S2), and Jeevamrutha (S3).The results of the experiment revealed that the combination of poultry manure as the organic fertilizer in conjunction with the application of Panchagavya spray had the most significant impact on both seed yield (779 kg ha-1) and haulm yield (1909 kg ha-1) for summer greengram cultivation. Furthermore, this specific combination demonstrated notably higher gross returns (?48,648 ha-1), net returns (?30,125 ha-1), and a favourable B C ratio of 2.60.
ABSTRACT
Chilli (Capsicum annuum L.) is one of the most extensively cultivated and economically important spice crops worldwide. Chilli is an economically important crop cultivated worldwide for its valuable fruits. The present study aimed to investigate the effect of micronutrients and bioinoculants on seed yield and quality of chilli. The experiment was laid out in Randomized Complete Block Design (RCBD-Factorial) with three replications and twenty treatments, including four micronutrients (M1-M5) and three bioinoculants (B0-B3). The interaction effect of micronutrients and bioinoculants was found to be significant in enhancing the chilli seed yield and quality. The treatment combination M5B3 (ZnSO4 (0.2%) + Trichoderma viride (TV) + Pseudomonas fluorescens (PF) + Azotobacter chroococcum (AC) (2.5 kg/ha +2.5 kg/ha+ 5.0 kg/ha)) showed the highest improvement. Therefore, it can be inferred that a combination of micronutrients and bioinoculants is recommended for increasing the seed yield and quality of chilli.
ABSTRACT
A field experiment was conducted at Agricultural Research Station, Bidar during Kharif 2018 and 2019 to determine the influence of appropriate stage of harvest on seed yield and quality parameters of soybean varieties JS-335 and DSb-21. The research plots were laid out in replication using factorial RCBD design. The crop was harvested according to the stage of harvest which was fixed as treatments i.e. at 80, 85, 90, 95 and 100 days after sowing (DAS) in both the varieties and threshing was done manually. The results revealed that among different harvesting stages, the seeds of the variety JS-335 harvested at 85 DAS showed highest seed yield and quality characters compared to early and delayed harvesting stage. Likewise in case of DSb-21 variety the crop harvested at 90 DAS recorded highest seed yield and quality parameters compared to other stages of harvest.
ABSTRACT
The effect of sowing date (three sowing dates viz., S1= 01 November, S2= 15 November and S3= 30 November) and phosphorus levels (four phosphorus fertilizer levels viz., P0= Control, P1= 35 kg P ha-1, P2= 45 kg P ha-1 and P3= 55 kg P ha-1) on growth, seed yield and quality of fenugreek was investigated at Horticulture Farm, Sher-e-Bangla Agricultural University, Dhaka, Bangladesh, during 10 October 2020 to April 2021. Growth-related data was maximum on S1 (01 November) treatment but S2 (15 November) treatment showed the best result in case of seed yield. In case of growth characters, P3 (55 kg ha-1) revealed the best result but in case of seed yield, P2 (45 kg ha-1) treatment showed the best effect. Under this investigation, it was revealed that the maximum growth was obtained by S1P3 (01 November with 55 kg P ha-1) and the minimum growth was obtained by S3P0 (30 November with control) treatment combination. The maximum pods per plant (52.61), seeds per pod (12.87), weight of individual pod (147.11 mg), the weight of seeds per plant (7.67 g) and weight of 1000-seed (13.86 g), seed yield per plot (306.72 g), seed yield per hectare (2.13 t) and vigor index (570.27) was observed from the treatment combination S2P2 (15 November with 45 kg P ha-1). It was concluded that the combination of sowing date S2 (15 November) along with phosphorus application P2 (45 kg P ha-1) were given the better performance of all the yield contributing parameters and seed yield of fenugreek. So, S2P2 (15 November with 45 kg P ha-1) treatment combination can be repeated in different agro-ecological zones of Bangladesh.
ABSTRACT
Optimum planting arrangement is an important attribute for efficient utilization of available resources and to obtain high yield of cotton. Application of plant growth promoter and retardant on cotton in improved planting density are the innovative techniques in the establishment of more productive cotton crop. Therefore, we planned a field study to assess the role of bio-stimulant and growth retardant in the resource utilization efficiency of cotton cultivars planted under variable row spacing at Agronomic Research Area Bahauddin Zakariya University and Usmania Agricultural Farm Shujabad during Kharif 2012. Experimental treatments consisted of cotton genotypes viz. CIM-573 and CIM-598, cultivated under conventional (75 cm), medium (50 cm) and ultra-narrow row spacing (25 cm) with foliar spray of bio-stimulant (moringa leaf extract) and growth retardant (mepiquate chloride), either sole or in combination, keeping distilled water as a control. Exogenously applied MLE alone and MLE + MC significantly enhanced the number of squares, flowers and green bolls per plant leading to higher cotton seed and lint yield of CIM 598 cultivar cultivated under conventional row spacing. While application of MC alone and MLE + MC produced maximum micronaire value, fiber strength and fiber uniformity ratio of CIM 573 cultivar cultivated under conventional row spacing. The results suggested that application of MLE is a possible approach to enhance the cotton productivity and the use of MC to enhance the fiber quality attributes under conventional row spacing.
A configuração ideal de plantio é um atributo importante para a utilização eficiente dos recursos disponíveis e para obter alto rendimento de algodão. A aplicação de promotores de crescimento de plantas e reguladores de crescimento no algodão em uma densidade de plantio adequada são técnicas inovadoras na obtenção de safras de algodão mais produtivas. Portanto, foi planejado um estudo de campo para avaliar o papel de um bioestimulante e um regulador de crescimento na eficiência da utilização de recursos de cultivares de algodão plantadas com espaçamento variável entre linhas na Área de Pesquisa Agronômica Universidade Bahauddin Zakariya e Usmania Agricultural Farm Shujabad durante Kharif 2012. Os tratamentos experimentais consistiram em genótipos de algodão viz. CIM-573 e CIM-598, cultivadas sob espaçamento convencional (75 cm), médio (50 cm) e ultraestreito (25 cm) e pulverização foliar de bioestimulante (extrato de folha de moringa) e regulador de crescimento (cloreto de mepiquato)), sozinho ou combinado, mantendo a água destilada como controle. O MLE aplicado exogenamente sozinho e o MLE + MC aumentaram significativamente o número de quadrados, flores e cápsulas verdes por planta, levando a um maior rendimento de sementes e fibra de algodão da cultivar CIM 598 cultivada sob espaçamento convencional entre fileiras. Enquanto a aplicação de MC sozinho e MLE + MC produziu valor máximo de micronaire, resistência da fibra e razão de uniformidade da fibra da cultivar CIM 573 cultivada sob espaçamento convencional entre linhas. Os resultados sugeriram que a aplicação do MLE é uma abordagem possível para aumentar a produtividade do algodão e o uso de MC para aprimorar os atributos de qualidade da fibra no espaçamento convencional entre linhas.
Subject(s)
Gossypium/growth & development , Plant Growth RegulatorsABSTRACT
Abstract Optimum planting arrangement is an important attribute for efficient utilization of available resources and to obtain high yield of cotton. Application of plant growth promoter and retardant on cotton in improved planting density are the innovative techniques in the establishment of more productive cotton crop. Therefore, we planned a field study to assess the role of bio-stimulant and growth retardant in the resource utilization efficiency of cotton cultivars planted under variable row spacing at Agronomic Research Area Bahauddin Zakariya University and Usmania Agricultural Farm Shujabad during Kharif 2012. Experimental treatments consisted of cotton genotypes viz. CIM-573 and CIM-598, cultivated under conventional (75 cm), medium (50 cm) and ultra-narrow row spacing (25 cm) with foliar spray of bio-stimulant (moringa leaf extract) and growth retardant (mepiquate chloride), either sole or in combination, keeping distilled water as a control. Exogenously applied MLE alone and MLE + MC significantly enhanced the number of squares, flowers and green bolls per plant leading to higher cotton seed and lint yield of CIM 598 cultivar cultivated under conventional row spacing. While application of MC alone and MLE + MC produced maximum micronaire value, fiber strength and fiber uniformity ratio of CIM 573 cultivar cultivated under conventional row spacing. The results suggested that application of MLE is a possible approach to enhance the cotton productivity and the use of MC to enhance the fiber quality attributes under conventional row spacing.
Resumo A configuração ideal de plantio é um atributo importante para a utilização eficiente dos recursos disponíveis e para obter alto rendimento de algodão. A aplicação de promotores de crescimento de plantas e reguladores de crescimento no algodão em uma densidade de plantio adequada são técnicas inovadoras na obtenção de safras de algodão mais produtivas. Portanto, foi planejado um estudo de campo para avaliar o papel de um bioestimulante e um regulador de crescimento na eficiência da utilização de recursos de cultivares de algodão plantadas com espaçamento variável entre linhas na Área de Pesquisa Agronômica Universidade Bahauddin Zakariya e Usmania Agricultural Farm Shujabad durante Kharif 2012. Os tratamentos experimentais consistiram em genótipos de algodão viz. CIM-573 e CIM-598, cultivadas sob espaçamento convencional (75 cm), médio (50 cm) e ultraestreito (25 cm) e pulverização foliar de bioestimulante (extrato de folha de moringa) e regulador de crescimento (cloreto de mepiquato)), sozinho ou combinado, mantendo a água destilada como controle. O MLE aplicado exogenamente sozinho e o MLE + MC aumentaram significativamente o número de quadrados, flores e cápsulas verdes por planta, levando a um maior rendimento de sementes e fibra de algodão da cultivar CIM 598 cultivada sob espaçamento convencional entre fileiras. Enquanto a aplicação de MC sozinho e MLE + MC produziu valor máximo de micronaire, resistência da fibra e razão de uniformidade da fibra da cultivar CIM 573 cultivada sob espaçamento convencional entre linhas. Os resultados sugeriram que a aplicação do MLE é uma abordagem possível para aumentar a produtividade do algodão e o uso de MC para aprimorar os atributos de qualidade da fibra no espaçamento convencional entre linhas.
ABSTRACT
Optimum planting arrangement is an important attribute for efficient utilization of available resources and to obtain high yield of cotton. Application of plant growth promoter and retardant on cotton in improved planting density are the innovative techniques in the establishment of more productive cotton crop. Therefore, we planned a field study to assess the role of bio-stimulant and growth retardant in the resource utilization efficiency of cotton cultivars planted under variable row spacing at Agronomic Research Area Bahauddin Zakariya University and Usmania Agricultural Farm Shujabad during Kharif 2012. Experimental treatments consisted of cotton genotypes viz. CIM-573 and CIM-598, cultivated under conventional (75 cm), medium (50 cm) and ultra-narrow row spacing (25 cm) with foliar spray of bio-stimulant (moringa leaf extract) and growth retardant (mepiquate chloride), either sole or in combination, keeping distilled water as a control. Exogenously applied MLE alone and MLE + MC significantly enhanced the number of squares, flowers and green bolls per plant leading to higher cotton seed and lint yield of CIM 598 cultivar cultivated under conventional row spacing. While application of MC alone and MLE + MC produced maximum micronaire value, fiber strength and fiber uniformity ratio of CIM 573 cultivar cultivated under conventional row spacing. The results suggested that application of MLE is a possible approach to enhance the cotton productivity and the use of MC to enhance the fiber quality attributes under conventional row spacing.
A configuração ideal de plantio é um atributo importante para a utilização eficiente dos recursos disponíveis e para obter alto rendimento de algodão. A aplicação de promotores de crescimento de plantas e reguladores de crescimento no algodão em uma densidade de plantio adequada são técnicas inovadoras na obtenção de safras de algodão mais produtivas. Portanto, foi planejado um estudo de campo para avaliar o papel de um bioestimulante e um regulador de crescimento na eficiência da utilização de recursos de cultivares de algodão plantadas com espaçamento variável entre linhas na Área de Pesquisa Agronômica Universidade Bahauddin Zakariya e Usmania Agricultural Farm Shujabad durante Kharif 2012. Os tratamentos experimentais consistiram em genótipos de algodão viz. CIM-573 e CIM-598, cultivadas sob espaçamento convencional (75 cm), médio (50 cm) e ultraestreito (25 cm) e pulverização foliar de bioestimulante (extrato de folha de moringa) e regulador de crescimento (cloreto de mepiquato)), sozinho ou combinado, mantendo a água destilada como controle. O MLE aplicado exogenamente sozinho e o MLE + MC aumentaram significativamente o número de quadrados, flores e cápsulas verdes por planta, levando a um maior rendimento de sementes e fibra de algodão da cultivar CIM 598 cultivada sob espaçamento convencional entre fileiras. Enquanto a aplicação de MC sozinho e MLE + MC produziu valor máximo de micronaire, resistência da fibra e razão de uniformidade da fibra da cultivar CIM 573 cultivada sob espaçamento convencional entre linhas. Os resultados sugeriram que a aplicação do MLE é uma abordagem possível para aumentar a produtividade do algodão e o uso de MC para aprimorar os atributos de qualidade da fibra no espaçamento convencional entre linhas.
Subject(s)
Humans , Water , Agriculture , FlowersABSTRACT
Rationale: Crop production and quality of produce get affected by drought, stand establishment and low availability of nutrients. Apart from various prevailing methods, seed treatment through priming now-a-days has been found to noticeably improve crop establishment for increasing seed yield and quality. Aim: To study the effect of various seed priming options on rapeseed-mustard varieties. Place of Study: A field experiment was conducted at AB Block Farm, Bidhan Chandra Krishi Viswavidyalaya, Kalyani, Nadia, West Bengal, India during winter season of 2017-2018. Methodology: Experiment comprised six rapeseed-mustard varieties (Anushka, Sanchita, TBM-143,TBM-204, Kranti and Pusa Bold) in main plot and five seed priming options (KH2PO4 @ 0.15 mol 100 ml water-1 5 g seeds-1, KNO3 @ 0.1 mol 100 ml water-1 5 g seeds-1, PEG 6000 @ -0.3 MPa 100 ml water-1 5 g seeds-1, hydro priming @ 100 ml 5 g seeds-1 and control) in subplot, replicated thrice in a split plot design. Observations on growth and yield contributing parameters were recorded from the field. Further, various quality parameters of seed and seedlings were evaluated in the laboratory. Data on all the parameters were finally statistically analyzed. Results: Among the varieties, Pusa Bold performed better in terms of growth, yield contributing parameters and seed yield under seed priming through either KH2PO4 @ 0.15 mol 100 ml water-1 5 g seeds-1 or PEG 6000 @ -0.3 MPa 100 ml water-1 5 g seeds-1. Seed and seedling quality parameters such as root and shoot lengths, seedling fresh and dry weights, germination % and vigour index were also improved under the same. Conclusion: Cultivation of mustard variety, Pusa Bold by seed priming through any of those two chemicals (KH2PO4 or PEG 6000) can be recommended for New alluvial zone of West Bengal, India.
ABSTRACT
ABSTRACT: This study aimed to evaluate the effect of different levels of self-seeding Italian ryegrass (Lolium multiflorum Lam.) and nitrogen rates - applied additionally after two defoliations - on plant structure, in forage and seed yield. Levels of self-seeding were classified as very high (777 kg ha-1), high (736 kg ha-1), intermediate (624 kg ha-1), and low (234 kg ha-1). Populations were fertilized with zero, 20.25, 40.50, and 60.75 kg ha-1 of supplemental nitrogen applied after two defoliations; respectively, in very high, high, intermediate, and low levels. Higher levels of self-seeding promoted greater forage yield and uniformity of vegetation structure. Number of fertile tillers and number of seeds per plant have benefited by the combination of high self-seeding and supplemental nitrogen fertilization. Despite influencing the uniformity and amount of forage obtained in two defoliations, the very high and low self-seeding levels did not differ in Italian ryegrass seed production. However, linear addition for this same variable was obtained with the inclusion of supplemental nitrogen fertilization. In pastures from low and intermediate self-seeding levels, total dry mass increases linearly with the levels of nitrogen fertilization assessed in this research.
RESUMO: O objetivo deste estudo foi avaliar o efeito de diferentes níveis de ressemeadura natural de azevém anual (Lolium multiflorum Lam.), bem como, doses suplementares de nitrogênio sobre a estrutura de plantas, produção de forragem e de sementes. Os níveis de ressemeadura foram classificados como: muito elevada (777 kg ha-1); elevada (736 kg ha-1); intermediária (624 kg ha-1) e baixa (234 kg ha-1). Populações oriundas destes níveis foram fertilizadas com zero, 20.25, 40.50, and 60.75 kg ha-1 de nitrogênio, aplicado de forma suplementar após duas desfolhas. Maiores níveis de ressemeadura propiciaram maior colheita de forragem e maior uniformização da estrutura da vegetação. A quantidade de perfilhos férteis e o número de sementes por planta foram beneficiados pela combinação de elevada ressemeadura e aplicação de nitrogênio. Apesar de influenciar a uniformização e a quantidade de forragem obtida em duas desfolhas, os níveis de ressemeadura natural, muito elevada e baixa não diferiram entre si na produção de sementes no ano subsequente. Todavia, acréscimo linear para esta mesma variável foi verificado com avanço suplementar da adubação nitrogenada. Em pastagem de azevém anual proveniente dos níveis baixo e intermediário, a produção de massa seca total é acrescida linearmente com os níveis de fertilização avaliados no presente trabalho.
ABSTRACT
Perilla frutescens,an annual plant in Labiatae family,is grown throughout China and can be used for medicine purposes and as food additives. The present field experiment was carried out to study the effects of different fertilizer treatments on the concentrations and accumulations of antioxidant components,including flavonoids and polyphenols,growth,seed yields and qualities of this plant.The main aim of this study is to provide farmers some advice for improving the yields and qualities of P. frutescens in theory and practice.Five treatments were set up,including a no fertilizer control(CK),chemical fertilizers(CF),organic fertilizers(M),organic fertilizers plus chemical fertilizers at the rates of 1 ∶1 and 1 ∶3 in terms of nitrogen(50 M,25 M). Plant growth parameters were recorded and total flavonoids and polyphenols were determined in three key growth stages of P. frutescens. At the fast growth period,samples of roots,leaves,and stems were collected for determining a total of flavonoids and polyphenols as well as DPPH removal rate of ethanol extracts. Seed yields and qualities were also recorded at harvest. The results showed fertilization enhanced growth and seed yields although no significant difference was observed in growth and seed yields in inorganic-organic fertilizer treatments. The total flavonoids,polyphenols,and DPPH removal rate of ethanol extracts followed the sequence leaves>stems>roots,indicating synthesis of these metabolites in the leaves. DPPH removal rate showed a positive linear correlation with total flavonoid and polyphenol concentrations. In addition,organic-inorganic fertilization significantly increased the numbers of both effective panicles and paniclegrains. Fertilizer treatments had no effect on seed qualities of P. frutescens,while 50 M achieved the highest yield,which increased by 14. 73% compared to CF alone. In general,50 M increased antioxidant components,biomass,and seed yield of P. frutescens,meriting advocate in cultivation.
Subject(s)
China , Fertilizers , Nitrogen , Perilla frutescens , Plant Leaves , Seeds , SoilABSTRACT
ABSTRACT The use of genetic divergence as a basis for identifying superior individuals, with greater heterozygosity, is important in view of the difficulty when selecting of dissimilar genotypes exhibiting high average for interest traits. The aim of this study was to evaluate the genetic divergence and the expression of seed production traits in seventeen apomictic Paspalum plicatulum × Paspalum guenoarum hybrids and two male parents (P. guenoarum). A randomized block design was used, with genotypes individually arranged into ten blocks. The following traits were assessed: total number of tillers/plant (TT), reproductive tiller/plant (RT), number of racemes per inflorescence (NRI), reproductive tiller height (RTH), inflorescence rachis length (IRL), number of seeds/inflorescence (NSI), weight of a thousand seeds (WTS) and seed production (SP). Genetic divergence among the genotypes was estimated using the Tocher method and UPGMA clustering, based on the generalized Mahalanobis distance (D2 ii'). The Tocher and UPGMA optimization methods showed high concordance. The traits that most contributed to genetic divergence were RTH (23.59%), IRL (21.63%), WTS (16.67%) and SP (14.23%). The presence of genetic diversity made it possible to identify divergent genotypes and those with high means for the traits studied, allowing the selection of genotypes with significant breeding potential. Repeated cross-breeding of female superior plants with the genotypes Azulão and H20 can result in a high heterosis effect on seed production characteristics.
RESUMO A utilização da divergência genética como base para a identificação de indivíduos superiores, com maior heterozigose, é importante diante da dificuldade de escolha de genótipos dissimilares, que apresentem média elevada para as características de interesse. O objetivo deste trabalho foi avaliar a divergência genética e a expressão dos caracteres da produção de sementes de dezessete híbridos apomíticos de Paspalum plicatulum × Paspalum guenoarum e dois genitores masculinos (P. guenoarum). O delineamento experimental utilizado foi o de blocos casualizados, com os genótipos arranjados individualmente em dez blocos. Foram avaliadas as seguintes características: total de perfilhos/planta (TP), perfilhos reprodutivos/planta (PR), número de racemos/inflorescência (NRI), altura dos perfilhos reprodutivos (APR), comprimento de inflorescência (CI), número de sementes/inflorescência (NSI), peso de mil sementes (PMS) e produção de sementes (PS). A divergência genética entre os genótipos foi estimada pelos métodos de agrupamento de Tocher e UPGMA, com emprego da distância generalizada de Mahalanobis (D2 ii'). Os métodos de otimização de Tocher e UPGMA foram concordantes entre si. As características APR (23,59%), CI (21,63%), PMS (16,67%) e PS (14,23%) foram as que mais contribuíram para a divergência genética. A presença de variabilidade genética permitiu a identificação de genótipos divergentes e com médias elevadas para os caracteres estudados, o que possibilita selecionar genótipos com elevado potencial para fins de melhoramento genético. O cruzamento repetido de plantas sexuais superiores com os genótipos Azulão e H20 pode proporcionar efeito heterótico elevado nos caracteres da produção de sementes.
ABSTRACT
Ten mungbean genotypes were evaluated to estimate the genotypic variation for seed yield components and Nitrogen and Phosphorus uptake after inoculating with three microbial treatments (Rhizobium, Piriformospora indica and their combined inoculation). Significant genotypic differences for all characters indicated presence of considerable variability. All the microbial treatments and genotype x microbial interaction differed significantly except for maturity, branches/plant and seeds/pod. The traits affected most by Rhizobium inoculation in majority of the genotypes were plant height, pods/plant and seed yield. Above 50 per cent P. indica infection in roots was observed in eight genotypes, however, its effect was observed only in a few genotypes on plant height, P content in shoot, 100-seed weight and seed yield. The effect of combined inoculation was observed on seed yield only. Effect of all the three inoculants was observed in only MH-810 and MH-721. Maximum response of Rhizobium and dual inoculation was observed in MH-421.