Research progress on clinical application and quality control of sprays / 药学实践杂志

Sprays have gained significant attention and widespread use due to their numerous advantages, including rapid action, safety, and convenience. They are widely used in various fields such as dermatology, respiratory disease treatment, wound repair, and central nervous system targeted drug delivery. With the in-depth research of new drugs and modern pharmaceutics, the development ideas of sprays are more diverse, and the application scenarios are increasingly extensive. In this review the clinical application status of sprays and the latest research progress were summarized. Then the quality control parameters were briefly introduced，which provided reference for the research and development of sprays.

Study on fluvoxamine maleate sustained-release pellets and its compression technology / 药学学报

In this study, fluvoxamine maleate sustained-release pellet system tablets were prepared and were used to evaluate their release behaviors in vitro. Fluvoxamine maleate pellets were prepared using centrifugal-spherization method and coated by fluidized bed as bottom-spray. The multi-unit sustained-release pellets and appropriate excipients for prescription volumes were mixed uniformly and then compressed to tablets. Screening and determining the optimal formulation of drug loaded pellets through L8 (24) Taguchi experiment. Using Minitab software to design a DOE experiment with 24 partial factors, including material temperature, fan speed, atomization pressure, and spray rate to optimize the bottom spray coating process. Taking monostearate glycerol ester with a particle size of 24-40 mesh as the main diluent for tableting to relieve the delamination phenomenon between pellets and excipients during tablet pressing and reduce mechanical damage to the coating film. By examining the powder fluidity indexes such as angle of repose, bulk density, tapped density, and Hausner ratio of mixed particles, it was found that the flowability and compressibility are good and suitable for direct compression. Evaluate the basic properties of the sustained-release tablets, investigate the in vitro release behavior and study the release mechanism. The results of in vitro release test showed that the self-made sustained-release tablets could disintegrate into independent pellet units in phosphate buffer at pH 6.8 and release slowly within 24 h, which conformed to the first-order drug release model. The fluvoxamine maleate sustained-release pellet system tablets meet the requirements of preparation design and has a great commercial prospect.

Anti-COVID-19 mechanism of Anoectochilus roxburghii liquid based on network pharmacology and molecular docking / 药学学报

italic>Anoectochilus roxburghii liquid (spray, a hospital preparation of Wu Mengchao Hepatobiliary Hospital of Fujian Medical University) has shown a good clinical treatment effect during the COVID-19 pandemic, but its material basis and mechanism of action are still unclear. In this study, network pharmacology and molecular docking methods were used to predict the molecular mechanism of A. roxburghii liquid against COVID-19, and pharmacodynamic experiments in vitro were conducted to study the interaction between the current targets with clear preventive and therapeutic effects and the key components of A. roxburghii liquid. UPLC-MS and database were used to compare and analyze the active ingredients in the liquid, and 17 potential active ingredients with good drug-like properties were screened by in vivo pharmacokinetics process in SwissADME database. SwissTargetPrediction and GeneCards were searched to find 93 common targets. Cytoscape 3.8.2 software was used to construct the "component-target" network map, and the Metascape platform was used for gene function annotation and pathway enrichment analysis. It was found that the extract could regulate the positive response to external stimuli, inflammatory response, cytokine production and other biological processes by binding the active ingredients such as isorhamnetin, kaempferol, luteolin, quercetin and apigenin to the common targets (NOS3, MPO, MMP3, etc.), and play an anti-COVID-19 role. In the angiotensin-converting enzyme 2 (ACE2) activity inhibition assay, it was found that the stock solution of A. roxburghii liquid (for spray), and the supernatant after removing polysaccharides (mainly containing flavonoids) could to some extent inhibit the activity of ACE2. Crucially, in the experiment of 2019-nCOV-S pseudovirus infecting HEK-293T-ACE2 cells, we found that A. roxburghii liquid may exert anti-COVID-19 effects by blocking the binding of SARS-CoV-S protein to ACE2.

Effect of coolant spray on rib fracture pain of geriatric blunt thoracic trauma patients: a randomized controlled trial

SUMMARY OBJECTIVE: This study aimed to evaluate the effectiveness of cryotherapy in elderly patients with rib fractures due to blunt thoracic trauma. METHODS: In this prospective randomized controlled study, geriatric patients were assigned to groups to receive either coolant spray (n=51) or placebo spray (n=50). The visual analog scale scores of all patients were recorded before starting spray application (V0), as well as at 10th (V1), 20th (V2), 30th (V3), 60th (V4), 120th (V5), and 360th (V6) minute. The mean decreases in the visual analog scale scores were calculated. RESULTS: The differences between V0 and V1, V0 and V2, V0 and V3, and V0 and V4 mean visual analog scale scores measured in the coolant spray group were found to be significantly higher (p<0.001). In V1, V2, V3, and V4 measurements, the incidence of "clinical effectiveness" in the coolant spray group was significantly higher than in the placebo group (p=0.001). CONCLUSIONS: Coolant spray therapy can be used as a component of multimodal therapy to provide adequate analgesia due to rib fractures in geriatric patients.

Microencapsulação de enterocina e oleo de oregano em leitelho / Microencapsulation of the enterocin and essential oil oregano in buttermilk / Microencapsulación de enterocina y aceite esencial de orégano en suero de leche

A pesquisa busca técnicas alternativas para expansão da vida de prateleira dos alimentos, isto tem impulsionado estudos sobre a utilização de conservantes naturais, tais como as bacteriocinas e óleos essenciais, que são considerados agentes antimicrobianos naturais. No entanto estes antimicrobianos naturais, não são adicionados diretamente em produtos alimentícios, devido a alterações sensoriais e em suas características físico e química. Com avanço tecnológico da microencapsulação, tem sido um potencial em fornecer sistemas que garantem estabilidade para os antimicrobianos naturais desta forma podendo compor a matriz de alimentos. Portanto, o objetivo desse trabalho foi microencapsular a enterocina produzida por Enterococcus durans MF5 e óleo de orégano usando leitelho. Para a microencapsulação, foram realizados três tratamentos: T1 controle leitelho, T2 leitelho/enterocina (LE), e T3 leitelho/enterocina/óleo (LEO). O material foi submetido ao processo de spray dryer e foram realizados ensaios para determinar a atividade antimicrobiana do material encapsulado contra as bactérias Listeria monocytogenes, Listeria innocua e Listeria ivanovi. O rendimento da microencapsulação foi de 13,01% e 11,63% para LE e LEO, respectivamente. Os resultados apresentados nos microencapsulados LE e LEO mostraram inibição contra todas as bactérias teste, foi constatado que a microencapsulação de enterocina e óleo de orégano mantiveram seu poder antimicrobiano. A efetividade da microencapsulação foi realizada por (FTIR), onde picos de intensidade entre as amostras na região 1000 a 930 cm-¹ e 1800 a 1500 cm-¹ foram observadas. Os resultados apontam para mudança no perfil químico das amostras encapsuladas, corroborando com a hipótese que o leitelho apresentou papel encapsulante da bactericiona e óleo de orégano.Portanto a microencapsulação aumenta a eficácia antimicrobiana dos antimicrobianos.

The research seeks alternative techniques for expanding the shelf life of foods, this has driven studies on the use of natural preservatives, such as bacteriocins and essential oils, which are considered natural antimicrobial agents. However, these natural antimicrobials are not directly added to food products due to sensory changes and their physical and chemical characteristics. With technological advancement of microencap- sulation, it has been a potential to provide systems that ensure stability for natural anti- microbials in this way can compose the food matrix. Therefore, this study has an objective microencapsulated the interocin and essencial oil, used buttermilk as a encapsulating ma- terial where, T1 Buttermilk Control, T2 buttermilk/enterocin (LE), e T3 Buttermilk/en- terocin/oil (LEO). The product has been submitted to spray drier process, were conducted trials to determine antimicrobial activity. Was observed with mass yield 13,01% e 11,63% para LE e LEO. These results the microencapsulate indicate then LE e LEO there was inihibiton against bacteria tests. Was observed that the microencapsulated between enter- ocin and essential oil oregano maintained antimicrobial power. The effectiveness of the microencapsulated was performed by Fourier transform infrared (FTIR) analysis, where a sample in the region 1000 to 930 cm-¹ and 1800 to 1500 cm-¹ was observed. Therefore microencapsulation increases antimicrobial efficacy of antimicrobials.

La investigación busca técnicas alternativas para ampliar la vida útil de los alimentos, esto ha impulsado estudios sobre el uso de conservantes naturales, como las bacteriocinas y los aceites esenciales, que se consideran agentes antimicrobianos naturales. Sin embargo, estos antimicrobianos naturales no se añaden directamente a los productos alimentarios debido a los cambios sensoriales y a sus características físicas y químicas. Con el avance tecnológico de la microencapsulación, ha sido un potencial para proporcionar sistemas que garanticen la estabilidad de los antimicrobianos naturales de esta manera puede componer la matriz alimentaria. Por lo tanto, este estudio tiene como objetivo microencapsular la interocina y el aceite esencial, utilizando suero de leche como material encapsulante donde, T1 Suero de leche Control, T2 Suero de leche/enterocina (LE), e T3 Suero de leche/enterocina/aceite (LEO). El producto ha sido sometido al proceso de secado por pulverización, se realizaron ensayos para determinar la actividad antimicrobiana. Se observó con rendimiento de masa 13,01% e 11,63% para LE e LEO. Estos resultados indican que el microencapsulado LE e LEO fue inhibido contra las pruebas bacterianas. Se observó que el microencapsulado entre enterocina y aceite esencial de orégano mantuvo el poder antimicrobiano. La eficacia del microencapsulado fue realizada por análisis de infrarrojo transformado de Fourier (FTIR), donde fue observada una muestra en la región de 1000 a 930 cm-¹ y de 1800 a 1500 cm-¹. Por lo tanto, la microencapsulación aumenta la eficacia antimicrobiana de los antimicrobianos. PALABRAS CLAVE: Bacteriocina; Enterococcus durans; Suero de Leche; Origanum vulgare; Spray Dryer.

Microencapsulação de enterocina e oleo de oregano em leitelho / Microencapsulation of the enterocin and essential oil oregano in buttermilk / Microencapsulación de enterocina y aceite esencial de orégano en suero de leche

A pesquisa busca técnicas alternativas para expansão da vida de prateleira dos alimentos, isto tem impulsionado estudos sobre a utilização de conservantes naturais, tais como as bacteriocinas e óleos essenciais, que são considerados agentes antimicrobianos naturais. No entanto estes antimicrobianos naturais, não são adicionados diretamente em produtos alimentícios, devido a alterações sensoriais e em suas características físico e química. Com avanço tecnológico da microencapsulação, tem sido um potencial em fornecer sistemas que garantem estabilidade para os antimicrobianos naturais desta forma podendo compor a matriz de alimentos. Portanto, o objetivo desse trabalho foi microencapsular a enterocina produzida por Enterococcus durans MF5 e óleo de orégano usando leitelho. Para a microencapsulação, foram realizados três tratamentos: T1 controle leitelho, T2 leitelho/enterocina (LE), e T3 leitelho/enterocina/óleo (LEO). O material foi submetido ao processo de spray dryer e foram realizados ensaios para determinar a atividade antimicrobiana do material encapsulado contra as bactérias Listeria monocytogenes, Listeria innocua e Listeria ivanovi. O rendimento da microencapsulação foi de 13,01% e 11,63% para LE e LEO, respectivamente. Os resultados apresentados nos microencapsulados LE e LEO mostraram inibição contra todas as bactérias teste, foi constatado que a microencapsulação de enterocina e óleo de orégano mantiveram seu poder antimicrobiano. A efetividade da microencapsulação foi realizada por (FTIR), onde picos de intensidade entre as amostras na região 1000 a 930 cm-¹ e 1800 a 1500 cm-¹ foram observadas. Os resultados apontam para mudança no perfil químico das amostras encapsuladas, corroborando com a hipótese que o leitelho apresentou papel encapsulante da bactericiona e óleo de orégano.Portanto a microencapsulação aumenta a eficácia antimicrobiana dos antimicrobianos.

The research seeks alternative techniques for expanding the shelf life of foods, this has driven studies on the use of natural preservatives, such as bacteriocins and essential oils, which are considered natural antimicrobial agents. However, these natural antimicrobials are not directly added to food products due to sensory changes and their physical and chemical characteristics. With technological advancement of microencap- sulation, it has been a potential to provide systems that ensure stability for natural anti- microbials in this way can compose the food matrix. Therefore, this study has an objective microencapsulated the interocin and essencial oil, used buttermilk as a encapsulating ma- terial where, T1 Buttermilk Control, T2 buttermilk/enterocin (LE), e T3 Buttermilk/en- terocin/oil (LEO). The product has been submitted to spray drier process, were conducted trials to determine antimicrobial activity. Was observed with mass yield 13,01% e 11,63% para LE e LEO. These results the microencapsulate indicate then LE e LEO there was inihibiton against bacteria tests. Was observed that the microencapsulated between enter- ocin and essential oil oregano maintained antimicrobial power. The effectiveness of the microencapsulated was performed by Fourier transform infrared (FTIR) analysis, where a sample in the region 1000 to 930 cm-¹ and 1800 to 1500 cm-¹ was observed. Therefore microencapsulation increases antimicrobial efficacy of antimicrobials.

La investigación busca técnicas alternativas para ampliar la vida útil de los alimentos, esto ha impulsado estudios sobre el uso de conservantes naturales, como las bacteriocinas y los aceites esenciales, que se consideran agentes antimicrobianos naturales. Sin embargo, estos antimicrobianos naturales no se añaden directamente a los productos alimentarios debido a los cambios sensoriales y a sus características físicas y químicas. Con el avance tecnológico de la microencapsulación, ha sido un potencial para proporcionar sistemas que garanticen la estabilidad de los antimicrobianos naturales de esta manera puede componer la matriz alimentaria. Por lo tanto, este estudio tiene como objetivo microencapsular la interocina y el aceite esencial, utilizando suero de leche como material encapsulante donde, T1 Suero de leche Control, T2 Suero de leche/enterocina (LE), e T3 Suero de leche/enterocina/aceite (LEO). El producto ha sido sometido al proceso de secado por pulverización, se realizaron ensayos para determinar la actividad antimicrobiana. Se observó con rendimiento de masa 13,01% e 11,63% para LE e LEO. Estos resultados indican que el microencapsulado LE e LEO fue inhibido contra las pruebas bacterianas. Se observó que el microencapsulado entre enterocina y aceite esencial de orégano mantuvo el poder antimicrobiano. La eficacia del microencapsulado fue realizada por análisis de infrarrojo transformado de Fourier (FTIR), donde fue observada una muestra en la región de 1000 a 930 cm-¹ y de 1800 a 1500 cm-¹. Por lo tanto, la microencapsulación aumenta la eficacia antimicrobiana de los antimicrobianos. PALABRAS CLAVE: Bacteriocina; Enterococcus durans; Suero de Leche; Origanum vulgare; Spray Dryer.

Application prospect of reaction engineering approach in studying drying behavior of single droplet during spray drying of traditional Chinese medicine / 中国中药杂志

Spray drying technology is one of the most commonly used unit operations in the production of traditional Chinese medicine(TCM) preparations, offering advantages such as short drying time and uniform product quality. However, due to the properties of TCM extracts, such as high viscosity, strong hygroscopicity, and poor flowability, there is limited scope to solve the problems of wall adhesion and clumping in spray drying from the macroscopic perspective of pharmaceutical production. Therefore, it has become a trend to study and optimize the spray drying process from the microscopic point of view by investigating single droplet evaporation behavior. Based on the reaction engineering approach(REA), the single droplet drying system, as a novel method for studying droplets, collects parameter data on individual TCM droplets during the drying process and uses the REA to process the data and establish predictive models. This approach is crucial for understanding the mechanism of TCM spray drying. This paper summarized and analyzed the cha-racteristics of various single droplet systems, the application of REA in single droplet drying systems, and its significance in optimizing the process, predicting drying states, and shortening the development cycle in the field of TCM spray drying, and looked ahead to the prospects of this method, including the introduction of new parameters and imaging techniques, aiming to provide a reference for further research in the field of TCM spray drying.

Cost-effectiveness analysis of Biyuan Tongqiao Granules combined with Triamcinolone Acetonide Nasal Spray in treatment of chronic rhinosinusitis / 中国中药杂志

This study aims to evaluate the effectiveness and economic efficiency of Biyuan Tongqiao Granules combined with Triamcinolone Acetonide Nasal Spray in the treatment of chronic rhinosinusitis(CRS). The randomized controlled trial(RCT) of Biyuan Tongqiao Granules combined with Triamcinolone Acetonide Nasal Spray in the treatment of CRS was searched against EMbase, PubMed, Cochrane Library, CNKI, VIP, SinoMed, and Wanfang. The efficacy, nasal mucociliary transport time, and safety of the therapy above in the treatment of CRS were analyzed with single-group rate and Meta-analysis, and the economy and sensitivity were evaluated from the perspective of payer. A total of 9 RCTs were included, including 1 145 patients. Meta-analysis showed that compared with Triamcinolone Acetonide Nasal Spray alone, Biyuan Tongqiao Granules combined with Triamcinolone Acetonide Nasal Spray in the treatment of CRS patients increased the effective rate(RR=1.17, 95%CI[1.11, 1.24], P<0.000 01) and shortened the nasal mucociliary transport time(MD=-3.32, 95%CI[-5.86,-0.78], P=0.01), there was no significant difference in the incidence of adverse reactions between the two groups. The incremental cost-effectiveness analysis showed that the treatment costs of the control group and the observation group were 44.15 yuan and 1 044.96 yuan, respectively. In the Biyuan Tongqiao Granules combined with Triamcinolone Acetonide Nasal Spray treatment group, 75.48 yuan was spent to improve the effective rate of CRS by 1%. The one-way sensitivity analysis indicated the days of treatment, the RR of Biyuan Tongqiao Granules combined with Triamcinolone Acetonide Nasal Spray, the price of unit preparation of Biyuan Tongqiao Granules, and the effective rate of Triamcinolone Acetonide Nasal Spray alone had great influence on the incremental cost-effectiveness ratio. In conclusion, Biyuan Tongqiao Granules combined with Triamcinolone Acetonide Nasal Spray improves the therapeutic effect on CRS. The probabilistic sensitivity analysis showed that when the willingness to pay was greater than 7 920 yuan(less than 0.1 of GDP per capita 8 098 yuan), the combined therapy was economically superior to the control. Due to the limited number of articles published, it is necessary to carry out a real-world clinical trial of Biyuan Tongqiao Gra-nules and Triamcinolone Acetonide Nasal Spray in the treatment of CRS, so as to compare the cost-effectiveness of Biyuan Tongqiao Granules and Triamcinolone Acetonide Nasal Spray.

HPLC fingerprint，content determination and transferring patterns of index components of Xintongshu spray / 中国药房

OBJECTIVE To establish the HPLC fingerprint of Xintongshu spray， determine the contents of identified components， and investigate the transferring patterns of the index components of decoction pieces， intermediates and spray， so as to provide scientific reference for technology management and quality control of Xintongshu spray. METHODS HPLC fingerprints of 13 batches of Xintongshu spray were established by the Similarity Evaluation System for Chromatographic Fingerprints of TCM （2012 edition）， and common peaks were identified； the contents of identified components were determined by HPLC. The paeonol in Moutan Cortex and ferulic acid in Chuanxiong Rhizoma were used as index components to investigate the transferring patterns of them in decoction pieces， intermediates and spray. RESULTS There were a total of 33 common peaks in the fingerprints of 13 batches of Xintongshu spray， and the similarities were more than 0.994. Eight components were identified， i.e. gallic acid （peak 5）， oxypaeoniflorin （peak 9）， chlorogenic acid（peak 10）， caffeic acid （peak 14）， paeoniflorin （peak 17）， ferulic acid （peak 21）， senkyunolide Ⅰ （peak 27） and paeonol （peak 31）. The contents of 8 components ranged from 0.590 3- 0.719 7， 0.565 7-0.851 3， 0.279 4-0.368 1， 0.080 6-0.106 1， 1.922 5-3.033 5， 0.151 3-0.191 6， 0.250 6-0.336 0， 3.056 7-4.161 0 mg/mL， respectively. The average transfer rates of paeonol and ferulic acid from decoction pieces to sprays were 63.76% and 38.06%， respectively. It was also found that the process in which the loss of paeonol was more than 30% was the extraction by percolation and negative pressure concentration of Moutan Cortex. The process in which the loss of ferulic acid was more than 50% was the steam distillation extraction process of Chuanxiong Rhizoma. CONCLUSIONS The established HPLC fingerprint and content determination method of Xintongshu spray are reproducible and specific. The key processes that cause a decrease in the average transfer rates of the index components are the extraction by percolation and negative pressure concentration of Moutan Cortex and steam distillation extraction of Chuanxiong Rhizoma.

Comparative study of spray characteristics of domestic and foreign nasal spray delivery devices for live attenuated nasal influenza vaccine / 中国生物制品学杂志

@#Objective To compare the spray characteristics of domestic and foreign nasal spray delivery devices for live attenuated influenza vaccine(LAIV). Methods The particle size distribution(DV10,DV50 and DV90),the proportion of droplets smaller than 10 μm and Span of atomized particles of two brands of nasal spray delivery devices at home and abroad were measured by laser diffraction method,the spray pattern[maximum diameter(D_(max)),shortest diameter(D_(min))and ovality(D_(max)/D_(min))]and spray geometry(spray angle and width)were detected by Spray view,and the comparative analysis was performed. Results There was no significant difference in DV10,DV50,DV90 particle size distribution,proportion of droplets smaller than 10 μm and Span of atomized particles between the two kinds of domestic and foreign nasal spray delivery devices[F-values of Levene's test for equality of variances were 0. 622,0. 135,3. 067,0. 212 and 0. 058,P-values were0. 434,0. 714,0. 085,0. 647 and 0. 810,and significance(two-tailed)values of equal variances assumed were 0. 439,0. 228,0. 281,0. 539 and 0. 910,respectively];D_(max),D_(min)and ovality of the spray patterns showed no significant difference[F-values of Levene's test for equality of variances were 2. 102,2. 666 and 0. 514,P-values were 0. 158,0. 114 and0. 479,and significance(two-tailed)values of equal variances assumed were 0. 651,0. 407,and 0. 160,respectively];The geometric mean ratios of spray angle and width were 0. 92 and 0. 91,respectively,which ranged from 0. 90 to 1. 11.Conclusion Both the domestic and foreign nasal spray delivery devices meet the delivery requirement of the nasal spray LAIV,which can be used for the delivery of nasal spray vaccines and drugs.

Investigation and analysis of superficial fungal infection and drug use among naval trainees / 药学实践杂志

Objective To investigate the pathogenesis of superficial mycosis among naval trainees, and observe the efficacy of a novel antifungal drug. Methods A questionnaire survey was conducted on the onset, medication and recurrence of superficial fungal infection among the trainees from January, 2020 to July, 2020. At the same time, the new antifungal drug sulconazole nitrate spray was provided for treatment and the drug efficacy was observed. Results The participants generally lacked understanding and attention to superficial fungal infections. The incidence rate of superficial fungal infection was 52%, of which 76.2% of patients had recurrence of superficial fungal infection. The sulconazole nitrate spray showed great effect against these infections. Conclusion The trainees should understand the causes of superficial fungal infection through health education and seek medical treatment and medication in time. The cure rate of superficial fungal infections could only be improved through the collaborative management of the school, hospital, and trainees to reduce the impact of these infections on naval trainees’ work and life.

Comparison of different approaches for direct coupling of solid-phase microextraction to mass spectrometry for drugs of abuse analysis in plasma / 药物分析学报

The direct coupling of solid-phase microextraction(SPME)to mass spectrometry(MS)(SPME-MS)has proven to be an effective method for the fast screening and quantitative analysis of compounds in complex matrices such as blood and plasma.In recent years,our lab has developed three novel SPME-MS techniques:SPME-microfluidic open interface-MS(SPME-MOI-MS),coated blade spray-MS(CBS-MS),and SPME-probe electrospray ionization-MS(SPME-PESI-MS).The fast and high-throughput nature of these SPME-MS technologies makes them attractive options for point-of-care analysis and anti-doping testing.However,all these three techniques utilize different SPME geometries and were tested with different MS instruments.Lack of comparative data makes it difficult to determine which of these methodologies is the best option for any given application.This work fills this gap by making a comprehensive comparison of these three technologies with different SPME devices including SPME fibers,CBS blades,and SPME-PESI probes and SPME-liquid chromatography-MS(SPME-LC-MS)for the analysis of drugs of abuse using the same MS instrument.Furthermore,for the first time,we developed different desorption chambers for MOI-MS for coupling with SPME fibers,CBS blades,and SPME-PESI probes,thus illustrating the universality of this approach.In total,eight analytical methods were developed,with the experimental data showing that all the SPME-based methods provided good analytical performance with R2 of linearities larger than 0.9925,accuracies between 81％and 118％,and good precision with an RSD％≤13％.

Effects of Coating Method on Fabrication Quality of Flexible Silicone Blood Vessels / 医用生物力学

Objective To investigate the effect of different coating methods on production quality of complex and flexible silicone vascular replicas. Methods Based on models of anterior communicating artery aneurysms, several patient-specific models were made by using spray-coating method and brush-spin-coating method respectively, and two methods for making the same vascular structure were quantitatively compared in terms of thickness growth, circumferential uniformity and light transmittance. Results Brush-spin-coating method was better than spray-coating method in the thickness control and coating uniformity for fabrication of vessels with large curvature, variable diameter and straight tube, and the model had preferably light transmittance and surface smoothness. The relative deviation of thickness by brush-spin-coating method was decreased by 8. 9% , 10. 8% and 16. 9% respectively compared with spray-coating method. Conclusions At present stage, the brush-spin coating method has the advantage of thickness uniformity and light transmittance over the spray-coating method in making silicone phantoms, and it has promising application prospects in fluid mechanics field of in vitro experiment on large vessels.

Effects of ethanol and propylene glycol alone or in combination on the transdermal properties of triamcinolone acetonide spray solution / 药学实践杂志

Objective To conduct in vitro transdermal test on triamcinolone acetonide spray solution, and investigate the effects of ethanol and propylene glycol alone or in combination on the in vitro transdermal function of triamcinolone acetonide spray solution. Methods Rabbit abdominal skin was selected, and the in vitro penetration test of triamcinolone acetonide spray solution was carried out by Franz diffusion cell method, and the content of triamcinolone acetonide was determined by HPLC. The rate of transdermal absorption was compared. Results The transdermal absorption rate of the combined use of ethanol and propylene glycol was significantly higher than that of the single use (P<0.05), and the order of promoting the penetration of triamcinolone acetonide spray solution when ethanol and propylene glycol were combined by 10% ethanol + 25% propylene glycol >10% ethanol + 20% propylene glycol >15% ethanol + 25% propylene glycol >15% ethanol + 20% propylene glycol. Conclusion The combination of 10% ethanol and 25% propylene glycol could optimize the transdermal function of triamcinolone acetonide spray solution.

Study on protective effect and mechanism of Modified Yupingfeng nasal spray on nasal mucosal injury in AR model rats / 中国药房

OBJECTIVE To study protective effect and potential mechanism of Modified yupingfeng nasal spray （YPF+） on nasal mucosal injury in allergic rhinitis （AR） model rats. METHODS AR model was induced by ovalbumin （OVA） and randomly divided into model group， YPF+group （50 µg/side，twice a day）， positive control group （Mometasone furoate aqueous nasal spray， 50 µg/side，once a day）； the blank group was set up， with 10 rats in each group. Administration groups were given relevant medicine， and blank group and model group were given equivalent normal saline for consecutive 4 weeks. Thirty minutes after last medication， the behavioral scores of rats were recorded， and the pathological changes of their nasal mucosa tissue were observed. The level of reactive oxygen species （ROS） in nasal mucosa tissue was detected. The protein and mRNA expressions of nucleotide- binding oligomerization domain-like receptor protein 3 （NLRP3），caspase-1，gasdermin D （GSDMD） were detected； the contents of interleukin-1β （IL-1β） and IL-18 in serum were also determined. RESULTS Compared with blank group， in model group， the nasal mucosa tissue structure was disordered， inflammatory cells infiltrated seriously， and lamina propria vascular dilation was visible； its behavioral score and pathological score， the level of ROS， protein and mRNA expressions of NLRP3， caspase-1 and GSDMD， serum contents of IL-1β and IL-18 in nasal mucosa tissue were increased significantly （P＜0.05）. Compared with model group， the symptoms of nasal mucosal injury in rats of each drug group were improved to varying degrees， and the above indicators were significantly reduced （P＜0.05）. CONCLUSIONS YPF+ may improve nasal mucosal injury of rats， relieve AR symptoms such as sneezing， itchy nose， runny nose， the mechanism of which may be associated with reducing the production of ROS in nasal mucosa and downregulating NLRP3/caspase-1/ GSDMD pathway.

Research on friction and wear behaviors of silicon-lithium spray coating on zirconia ceramics / 北京大学学报(医学版)

OBJECTIVE@#To study microstructure, friction and wear behaviors of silicon-lithium spray coating on the surface of zirconia ceramics and to preliminarily evaluate its esthetic so as to provide support and guidance for the clinical application.@*METHODS@#Zirconia ceramic specimens were randomly divided into three groups: coating group (two subgroups), polishing group (two subgroups), and glazing group (four subgroups), with 10 samples in each subgroup. The two subgroups of coating group were the zirconia ceramics with the untreated and preliminary polishing surfaces sprayed with silicon-lithium coating, respectively. The two subgroups of polishing group were preliminary polishing and fine polishing of zirconia ceramics, respectively. The four subgroups of glazing group were preliminarily polished zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively; and untreated zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively. The above 8 subgroups of zirconia ceramic specimens were used as friction pairs with 80 steatite ceramics for 50 000 chewing cycles under 50 N vertical load and artificial saliva lubrication using chewing simulation. Scanning electron microscope was used to observe the microstructure of the surface and section of the coating group, and the thickness of the coating and glazing were measured. The linear roughness of the coating and polishing groups was mea-sured using a laser confocal scanning microscope. Vickers hardness was measured using a microhardness tester and the esthetic of zirconia ceramic full crown sprayed with silicon-lithium coating was preliminarily evaluated. White light interferometer was used to measure the width, the maximum depth and the volume of the wear scars of each group, and the wear depth of steatite ceramics and wear rate of zirconia ceramic specimens were calculated. Kruskal-Wallis nonparametric test and Dunn's multiple comparisons test were used to analyze the wear depth of each group (α=0.05).@*RESULTS@#The microstructures of the silica-lithium spray coatings on the untreated and preliminarily polished zirconia ceramic surfaces showed the protruding defects, and the line roughness of coating group was larger than that of the polishing group. The median thickness of the silica-lithium spray coating on the preliminarily polished zirconia ceramic was 13.0 μm (interquartile range, IQR: 11.6, 17.9), while that of the silica-lithium spray coating on the untreated zirconia ceramic was 4.4 μm (IQR: 4.1, 4.7). The Vickers hardness and wear rate of the coating group were between the polishing group and the glazing group. The wear depths of the wear scars of steatite ceramics were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference between glazing and polishing groups (P < 0.05). With the increase of polishing procedure, the wear depth of steatite ceramics decreased in each subgroups. The orders of maximum depth and volume of wear scars of zirconia ceramic were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference in the maximum depth of wear scars between glazing and polishing groups (P < 0.05).@*CONCLUSION@#The silica-lithium spray coating on the zirconia ceramic, can be used as a new method for zirconia ceramic surface treatment, because it can increase the esthetic of zirconia ceramics compared with polishing and reduce the wear of steatite ceramics compared with glazing.

Cause Analysis and Solution Strategy of Poor Solubility of Dioscoreae Rhizoma Formula Granules / 中国实验方剂学杂志

Dioscoreae Rhizoma formula granules are made from decoction pieces by decocting， extracting， separating， concentrating， drying and granulating， which have the advantages of simple dispensing， convenient use and easy to take without decoction. However， because Dioscoreae Rhizoma is rich in starch and mucus components， its extract powder and formula granules are poorly soluble and difficult to dissolve or disperse completely within 5 min， and the insoluble material is difficult to dissolve completely even after 24 h in water， which affects the quality evaluation of the formula granules and medication psychology of patients. Therefore， by studying the dissolution process and mechanism of Dioscoreae Rhizoma extract and its formula granules， it was found that the special chemical composition of Dioscoreae Rhizoma， the denaturation of starch and its compounding with protein and other substances during the high temperature extraction process， and the contraction of coating membrane during the spray drying process were combined to form the special microstructure of coating membrane covering starch granules， and it is the root cause of poor solubility of Dioscoreae Rhizoma formula granules. Based on the research on the structure， property and function of the powder， this paper proposed a technical strategy to improve the solubility of Dioscoreae Rhizoma formula granules by powder modification process， and experimentally demonstrated that the modified Dioscoreae Rhizoma formula granules could completely dissolve within 2 min， which solved the technical problem and could provide reference for the improvement of solubility of other similar varieties， and promote the high-quality development of traditional Chinese medicine formula granule industry.

Process optimization of physicochemical properties of spray-dried Hydrocotyle umbellata L. extract

Abstract Hydrocotyle umbellata L., Araliaceae, is a species that is recommended in Ayurvedic medicine for its effects on the central nervous system, such as anxiolytic and memory-stimulant effects. Despite the medicinal potential of this species, its phytopharmaceutical and technological potential to produce standardized extracts has not been investigated. This study analyzes the influence of spray drying parameters on the contents of the chemical markers (total phenolic, total flavonoid, and hibalactone) and the functional properties of H. umbellata extract. The optimization of drying conditions was performed using a central composite design combined with response surface methodology and desirability function approach. The mathematical models fitted to experimental data indicated that all the evaluated drying parameters significantly influenced the chemical contents. The optimal conditions were: inlet temperature of 120 °C, feed flow rate of 4 mL min-1, and colloidal silicon dioxide:maltodextrin ratio of 16%:4%. Under these conditions, the powder samples had spherical particles and desirable physicochemical and functional properties, such as low water activity and moisture content, good product recovery, reconstitution, and flowability. Thus, spray drying might be a promising technique for processing standardized H. umbellata extracts.

Nasal irrigation with corticosteroids in Brazil: the clinical response of 1% compounded budesonide drops and betamethasone cream

Abstract Introduction: High-volume corticosteroid nasal irrigation is a treatment option in patients with chronic rhinosinusitis. In Brazil, alternatives are used to optimize its cost and popularize its use, such as 1% compounded budesonide drops or betamethasone cream, and it is necessary to study these treatment modalities. Objective: To evaluate the clinical response of nasal irrigation with 1% compounded budesonide drops or betamethasone cream compared to nasal sprays utilized in patients with chronic rhinosinusitis. Methods: This was a retrospective observational study with 257 patients. One hundred and eight patients using corticosteroid nasal irrigation (292 treatment cycles) and 149 using corticosteroid nasal spray (300 treatment cycles) were included. Evaluation of subjective improvement, adverse events, exacerbations, and objective assessments with SNOT-22 and Lund-Kennedy endoscopic score were performed, in addition to sub-analyses related to nasal polyps and previous surgery. Results: Corticosteroid nasal irrigation and corticosteroid nasal spray improved the Lund-Kennedy endoscopic score, with more adverse events in the corticosteroid nasal irrigation group. Previous surgery increased corticosteroid nasal irrigation improvement, with greater subjective improvement and fewer exacerbations. 1% compounded budesonide drops were better than betamethasone cream in the Lund-Kennedy endoscopic score, with fewer adverse events. A 1,000 μg dose of 1% compounded budesonide drops was more effective than 500 μg. Conclusion: Corticosteroid nasal irrigation was effective in improving the Lund-Kennedy endoscopic score in chronic rhinosinusitis, especially in patients with nasal polyps and previous surgery, in addition to promoting a higher rate of subjective improvement and fewer exacerbations than corticosteroid nasal spray, but with more adverse events. 1% compounded budesonide drops improved the Lund-Kennedy endoscopic score with fewer adverse events than betamethasone cream, particularly at higher doses (1000 μg).

Effectiveness Comparison of Polysaccharides, Proteins, and Lipids as Composite Edible Coatings on the Quality of Food Products / Comparación de la Efectividad de Polisacáridos, Proteínas y Lípidos como Recubrimientos Compuestos Comestibles en la Calidad de los Productos Alimenticios

Background: This research was motivated by the complaints of tomato farmers about their crops that quickly rotted before being sold, as well as the many research results (raw materials and methods) that edible coating films could not be applied optimally. Objectives: The research was a practical recommendation by comparing the effectiveness of raw materials (polysaccharides, proteins, and lipids) with the dipping and spray methods. Materials and methods used in the comparison process were the application of Structural Equation Modeling (SEM) with the Partial Least Square (PLS) approach. Results: Dipping has a strong effect (f2 ≥ 0.35; p<0.05), while spray had a moderate effect (f2: 0.15-0.35; p<0.05). Thus, the role of dipping as a mediator was more dominant than spray. Compared to proteins and lipids, polysaccharides had the best effectiveness (ß:0.460-0.584; f2: 0.15-0.35; p<0.05). Conclusion: the three ingredients improved the quality of tomatoes, and the dipping method was easier to apply by farmers than the spray method, which had many obstacles in its application

Antecedentes: esta investigación está motivada por las quejas de los productores de tomate sobre sus cultivos que se pudren rápidamente antes de ser vendidos, así como por los muchos resultados de la investigación (materias primas y métodos) de que las películas de recubrimiento comestibles no se pudieron aplicar de manera óptima. Objetivos: La investigación consiste en recomendaciones prácticas mediante la comparación de la eficacia de las materias primas (polisacáridos, proteínas y lípidos) con los métodos de inmersión y aspersión. Métodos: El método utilizado en el proceso de comparación es la aplicación del modelo de ecuaciones estructurales (SEM) con el enfoque de mínimos cuadrados parciales (PLS). Resultados: La inmersión tiene un efecto fuerte (f2 ≥ 0,35; p<0,05), mientras que la pulverización tiene un efecto moderado (f2: 0,15-0,35; p<0,05). Por lo tanto, el papel de la inmersión como mediador es más dominante que el del rociado. Los polisacáridos tienen la mejor eficacia (ß:0,460-0,584; f2: 0,15-0,35; p<0,05) en comparación con las proteínas y los lípidos. Conclusión: es que los tres ingredientes pueden mejorar la calidad de los tomates, y el método de inmersión es más fácil de aplicar por los agricultores que el método de aspersión, que tiene muchos obstáculos en su aplicación