ABSTRACT
A camada híbrida é definida pela zona de inter difusão do polímero do adesivo e o substrato dental. Os sistemas adesivos universais são materiais que foram criados com o intuito de substituir a estrutura dental que foi perdida a fim de diminuir essa área de interação adesiva e os espaços desmineralizados da dentina. O objetivo do seguinte estudo é realizar uma revisão de literatura acerca da influência dos adesivos universais e o uso do ácido glicólico como condicionante dental. Foi realizada uma busca na literatura atual, nas seguintes bases de dados: PubMed, Scielo, Medline e Google Acadêmico nos idiomas inglês e português usando os termos de pesquisa: "adhesive systems" AND "phosphoricacid" OR/AND "glycolicacid" OR/AND "hybridlayer" OR/AND "universal adhesive system". As pesquisas realizadas utilizando o ácido glicólico como agente condicionante dental demonstraram que a substância tem potencial e efetividade, diminuindo consideravelmente a região de fibras colágenas expostas para a fusão do adesivo universal. O ácido glicólico utilizado como agente condicionante de esmalte e dentina mostrou-se eficaz e promissor, tendo em vista que a camada híbrida se apresentou com menor espessura sem alterar a estrutura dentinária. Porém, faz-se necessário mais pesquisas utilizando o ácido glicólico juntamente com o sistema adesivo universal, por curto, médio e longo prazo.
The hybrid layeri s defined by the interdiffusion zone of the adhesive polymer and the dental substrate. Universal adhesive systems are materials that have been created with the aim of replacing the tooth structure that has been lost in order to reduce this area of adhesive interaction and the demineralized spaces of dentin. The aim of the following study is to perform a literature review on the influence of universal adhesives and the use of glycolic acid as a dental conditioning agent. A search was conducted in the current literature in the following databases: PubMed, Scielo, Medline and Google Scholar in English and Portuguese using the search terms: "adhesive systems" AND "phosphoric acid" AND "glycolic acid" AND "hybrid layer" OR "universal adhesive system". Research using glycolic acid as a dental conditioning agent has shown that the substance has potential and effectiveness, considerably reducing the region of collagen fibers exposed for the fusion of the universal adhesive. Glycolic acid used as a conditioning agent for enameland dent inproved to be effective and promising, considering that the hybrid layer was presented with less thickness without altering the dentin structure. However, further research his needed usinggly colic acid together with the universal adhesive system, for short, medium and long term.
Subject(s)
Phosphoric Acids , Adhesiveness , Dentin-Bonding Agents , Glycolates , AcidsABSTRACT
Abstract This study evaluated a new method of adhesive system application on the bond strength between fiber post and root dentin using two adhesive systems. The canals of sixty bovine incisors were prepared and obturated. The roots were divided into six groups (n=10) according to the adhesive system (Clearfil SE - CSE and Single Bond Universal - SBU) and the application strategy (microbrush - MB; rotary brush - RB; and ultrasonic tip - US). The glass fiber posts were cemented with resin cement (RelyX ARC). The roots were sectioned perpendicularly to their long axis, and three slices per root were obtained. Previously to the push-out test, confocal laser scanning microscopy (CLSM) was performed to illustrate the interfacial adaptation of the cement to the root canal walls. Failure patterns were analyzed with 40x magnification. Shapiro-Wilk indicated a normal distribution of the data. The bond strength values were compared using one-way ANOVA and Tukey's tests. Student's T test analyzed the differences between the adhesive systems within each third and protocol. A significance level of 5% was used. CSE with RB showed higher mean bond strength values compared to MB (conventional technique) (P < 0.05). US application resulted in intermediate bond strength values for CSE (P > 0.05). The application of SBU using RB generated higher mean bond strength values compared to MB and US (P < 0.05). Adhesive failures were predominant (65.5%). CSE and SBU application with the new rotary brush improved the bond strength of fiber posts to root dentin compared to the conventional strategy.
Resumo Este estudo avaliou o efeito de um novo método para aplicação do sistema adesivo na resistência de união entre pino de fibra e dentina radicular usando dois sistemas adesivos. Os canais de sessenta incisivos bovinos foram preparados e obturados. As raízes foram divididas em seis grupos (n=10) de acordo com o sistema adesivo (Clearfil SE - CSE e Single Bond Universal - SBU) e com a estratégia de aplicação (microbrush - MB, escova rotatória - RB e inserto ultrassônico - US). Os pinos de fibra foram cimentados utilizando cimento resinoso (RelyX ARC). As raízes foram seccionadas perpendicularmente ao seu longo eixo e três fatias foram obtidas. Previamente ao teste de push-out, foi realizada microscopia de varredura confocal a laser para ilustrar a adaptação interfacial do cimento às paredes do canal radicular. Os padrões de falha foram analisados com magnificação de 40x. O teste de Shapiro-Wilk indicou distribuição normal dos dados. Os valores de resistência de união foram comparados usando o teste ANOVA de uma via e post hoc de Tukey. As diferenças entre os sistemas adesivos em cada terço e de acordo com cada protocolo foram analisadas pelo teste T de Student. O nível de significância foi de 5%. CSE aplicado com RB apresentou maiores valores médios de resistência de união do que quando aplicado com MB (técnica convencional) (P<0,05). Aplicação com US apresentou valores intermediários de resistência de união para o CSE (P>0,05). A aplicação do SBU utilizando RB gerou maiores valores médios de resistência de união comparados com MB e US (P<0,05). Falhas adesivas foram predominantes (65,5%). A aplicação do CSE e SBU com a nova escova rotatória melhorou a resistência de união dos pinos de fibra à dentina radicular comparados com a estratégia convencional.
ABSTRACT
This study aimed to evaluate if 2.5% sodium hypochlorite compromises the adhesion of bonding materials. The factors in the study were the irrigation solutions in two levels: 2.5% sodium hypochlorite and saline solution; and the adhesive systems used in three levels: three-step adhesive, universal adhesive, and two-step self-etch adhesive systems. The answer variable used was the microshear bond strength obtained through a universal testing machine and fracture mode. Six groups were obtained (n=10) : Etch-and-rinse/Saline (saline solution + 3-step adhesive system - Scotchbond Multipurpose, 3M ESPE); Universal/saline (saline solution + universal adhesive system Prime&Bond,); Self-etch/saline (saline solution + 2-step self-etch adhesive systems - Clearfil SE Bond); Etch-and-rinse/Hypo (sodium hypochlorite 2,5% + 3-step adhesive system - Scotchbond Multiuso); Universal/Hypo (sodium hypochlorite 2,5% + universal adhesive system Prime&Bond); Self-etch/Hypo (sodium hypochlorite 2,5% + 2-step self-etch adhesive system - Clearfil Se Bond). The specimens were obtained from 60 healthy bovine incisors. The crowns were separated from the roots, and the regularization of the buccal surface was performed. The groups received saline solution and 2.5% sodium hypochlorite for 30 minutes, respectively. A matrix of 1mm and 3mm oh height was stabilized by Scotch tape to obtain the resin sticks. Afterward, the bond strength test was performed in a universal testing machine at 1mm/min speed. The data were analyzed with normality Shapiro-Wilk, two-way ANOVA, and Tukey's tests (p<0.001). Etch-and-rinse and Self-etch adhesives presented the highest bond strength values after irrigation with saline solution and 2.5% sodium hypochlorite, respectively (P < 0.01). The irrigation with 2.5% sodium hypochlorite decreased the bond strength values of Etch-and-rinse and Universal (P < 0.01). On the other hand, 2.5% sodium hypochlorite improved the bond strength values of Self-etch (P < 0.01). In conclusion, 2.5% sodium hypochlorite negatively impacted the bond strength of Etch-and-rinse and Universal but improved the adhesion of Self-etch.
Subject(s)
Animals , Cattle , Sodium Hypochlorite/administration & dosage , Adhesives/chemistry , Disinfection , Dental Bonding/methods , Dental Cements/therapeutic use , Sodium Hypochlorite/therapeutic use , Saline Solution/administration & dosageABSTRACT
Abstract: Objective: To evaluate non-carious cervical lesions (NCCLs) restored with different adhesion strategies. Methodology: This is a prospective, randomized, double-blind, split-mouth study. An adhesive restorative system (Single Bond Universal/Filtek Z350XT - SBU) was evaluated both without and with selective enamel conditioning (E-SBU), resin-modified glass-ionomer cements (Vitremer; RMGIC), and ethylenediaminetetraacetic acid pretreatment (EDTA; E-RMGIC). In total, 200 restorations, placed in 50 patients, were evaluated at baseline and at a 3-year follow-up using the modified United States Public Health Service (USPHS) criteria. Data were analyzed using the two-proportion equality test, multinomial logistic regression, Wilcoxon test, and Kaplan-Meier survival curves. Results: In total, 42 (84%) patients returned for the 3-year follow-up. SBU showed restoration losses statistically different from RMGIC. Retention was also statistically different in SBU between baseline and the 3-year follow-up. Marginal defects and surface texture were statistically significant for all groups in the period studied, except for the surface texture of SBU and the marginal integrity in E-RMGIC. We observed no statistically significant difference in wear, secondary caries, anatomical form, surface staining, and color over time. Recession degree was the only factor to influence retention rates. Cumulative survival (%) was 89, 98, 98, and 95.3, for SBU, SE-SBU, RMGIC, and E-RMGIC, respectively, without significant differences among them. There was a statistically significant difference between survival curves; however, multiple comparison procedures found no statistical differences. Conclusion: Selective enamel etching affected the retention of non-carious cervical restorations. Adhesion using EDTA and resin-modified glass-ionomer cements delayed marginal defects over time. The degree of gingival recession influenced retention rates. Resin composite restorations showed initial marginal defects, and ionomer restorations, reduced surface luster. EDTA pre-treatment followed by resin-modified glass-ionomer cements may be a promising adhesion strategy for NCCL restorations.
Subject(s)
Humans , Dental Caries/therapy , Dental Restoration, Permanent , Prospective Studies , Follow-Up Studies , Dental Marginal Adaptation , Composite Resins , Resin Cements , Glass Ionomer Cements/therapeutic useABSTRACT
Resumen: El objetivo de este artículo es analizar las indicaciones para la selección adecuada de restauraciones parciales de cerámica adhesiva tipo Onlay, proporcionando el protocolo clínico paso a paso para su correcta aplicación. Principios biomecánicos basados en consideraciones morfológicas y términos geométricos, deberán estar presentes para la cuidadosa preparación de cavidades tipo Onlay. Se discuten conceptos sobre las preparaciones cavitarias bajo condiciones esenciales en la preservación de tejido dental sano, sin compromiso de cúspides de soporte o vertientes que comprometan el resultado final de la restauración en condiciones funcionales y estéticas debidamente planificadas. La sugerencia del autor es respetar y seguir de forma puntual cada uno de los pasos aplicados en el protocolo clínico restaurador, para mejorar el resultado final de las restauraciones en los casos clínicos personalizados.
Abstract: The objective of this article was to analyze the indications for the proper selection of Onlay adhesive ceramic restorations, providing a step-by-step clinical protocol. Biomechanical principles based on morphological considerations and geometric terms must be present for the careful preparation of Onlay-type cavities. Concepts about cavitary preparations are discussed under essential conditions in the preservation of healthy dental tissue, without compromising the functional and aesthetic results over time. The author's suggestion is to respect and follow in a timely manner each of the steps applied in this restorative clinical protocol, to improve the final outcome of the restoration.
Subject(s)
Humans , Female , Adult , Dental Occlusion , Dental Restoration, Permanent , Composite Resins/therapeutic useABSTRACT
ABSTRACT The aim of this study was to evaluate the shear bond strength (SBS) of two universal adhesives (Universal Single Bond and All Bond Universal) and a two- step self-etch adhesive system (Clearfil SE Bond) to dentine at various temperatures. Materials and Methods: One hundred and twenty dentin specimens were divided randomly to 12 groups, according to adhesive systems (Universal Single Bond and All Bond Universal, Clearfil SE Bond) and temperature ( 4ºC, 20 ºC, 36ºC, 55ºC) used. Dentin specimens were prepared (n :10, adhesives were applied, and composite cylinders were polymerized. Statistical analysis of the SBS data was performed using Two-way analysis of variance (ANOVA) and Tukey's Honestly Significant Differences post-hoc test. Results: The Clearfil SE Bond was shown to have higher SBS than the universal adhesives at all temperatures; however, there was no statistically significant difference (P>0.05). In both groups, the lowest SBS values were observed in the samples at 4°C while the highest SBS values were observed in the samples at 55°C. In this case, there was a statistically significant difference (P<0.05). Conclusions: The results suggest that the effectiveness of an adhesive may increase if it is preheated at 36°C or above before use instead of being used immediately after removal from the refrigerator or at room temperature.
RESUMEN El objetivo de este estudio fue evaluar la resistencia al cizallamiento (SBS) de dos adhesivos universales (Universal Single Bond y All Bond Universal) y un sistema de adhesivo de autograbado de dos pasos (Clearfil SE Bond) a la dentina en diferentes temperaturas. Materiales y métodos: Ciento veinte muestras de dentina se dividieron aleatoriamente en 12 grupos, de acuerdo con los sistemas adhesivos (Universal Single Bond y All Bond Universal, Clearfil SE Bond) y la temperatura (4ºC, 20ºC, 36ºC, 55ºC) utilizada. Se prepararon muestras de dentina (n: 10), se aplicaron los sistemas adhesivos y se polimerizaron los cilindros compuestos. El análisis estadístico de los datos de SBS se realizó utilizando el análisis de varianza de dos vías (ANOVA) y la prueba post-hoc de Tukey's. Resultados: El Clearfil SE Bond mostró tener un SBS más alto que los adhesivos universales en todas las temperaturas evaluadas; sin embargo, no hubo una diferencia estadísticamente significativa (P> 0.05). En todos los grupos, los valores más bajos de SBS se observaron en las muestras a 4°C, mientras que los valores de SBS más altos fueron obtenidos en las muestras a 55°C (P <0.05). Conclusiones: Los resultados sugieren que la efectividad de un adhesivo puede aumentar si se precalienta a 36°C o superior, antes de usarlo inmediatamente después de sacarlo del refrigerador o a temperatura ambiente.
Subject(s)
Dentin-Bonding Agents , Dental Cements , Shear Strength , DentinABSTRACT
ABSTRACT: The aim of this study was to analyze the bond strength of total-etch and self-etch adhesive systems to dentin of primary and permanent teeth. Methods: Thirty sound naturally exfoliated primary molars deciduous teeth (DT) and thirty sound permanent bicuspids permanent teeth (PT) were randomly divided into six groups (n=10 per group) according to two commercial adhesive systems: Adper Single Bond 2; 3M ESPE (Total-etch) and Adper Easy Bond; 3M ESPE (selfetch and total-etch). Specimens submitted to cyclic loading in a universal Instron testing machine. Bond strength values (MPa) were analyzed by ANOVA test and Duncan post hoc test (a=0.05). Results: Mean values were higher in PT compared to DT. In deciduous teeth, no significantly differences observed. Total etch AdperTM Single Bond 2 showed significantly higher bond strength than self-etch AdperTM with additional acid etching in PT (p=0.031). Conclusion: Our findings suggest that the highest bond strength was found in dentin tissue of PT with total etch AdperTM employing the adhesive the Single Bond 2 of one step self-etch.
RESUMEN: El objetivo de este estudio fue analizar la fuerza de unión de los sistemas adhesivos de grabado total y autograbado a la dentina de los dientes primarios y permanentes. Métodos: treinta sonidos exfoliaron naturalmente los molares primarios dientes caducifolios (DT) y treinta sonidos. Los dientes permanentes de los premolares permanentes (PT) se dividieron aleatoriamente en seis grupos (n = 10 por grupo) de acuerdo con dos sistemas adhesivos comerciales: Adper Single Bond 2; 3M ESPE (Grabado total) y Adper Easy Bond; 3M ESPE (autograbado y grabado total). Muestras sometidas a carga cíclica en una máquina universal de pruebas Instron. Los valores de resistencia de la unión (MPa) se analizaron mediante la prueba ANOVA y la prueba post hoc de Duncan (a = 0.05). Resultados: Los valores medios fueron mayores en PT en comparación con DT. En dientes deciduos, no se observaron diferencias significativas. Total etch AdperTM Single Bond 2 mostró una fuerza de unión significativamente mayor que la autograbado AdperTM con grabado ácido adicional en PT (p = 0.031). Conclusión: Nuestros hallazgos sugieren que la mayor fuerza de unión se encontró en el tejido de dentina de PT con grabado total AdperTM empleando el adhesivo Single Bond 2 de autograbado de un solo paso.
Subject(s)
Humans , Dental Bonding , Dentin-Bonding Agents , Dental Cements/classification , Dental Cements/chemistry , Tooth, Deciduous , In Vitro Techniques , Adhesives , Dentition, Permanent , Shear Strength , MolarABSTRACT
Introducción: Hoy en día, la mayoría de los pacientes requieren tratamiento de ortodoncia fija convencional, la cual utiliza procedimientos adhesivos afines con la superficie amelodentinaria. Aunque existen diferentes técnicas adhesivas que pueden ofrecer adecuados niveles de resistencia al desalojo, el uso del hipoclorito de sodio (NaClO) como agente desproteinizante no ha sido bien definido en materiales de cementación en aparatología ortodóncica convencional. Objetivo: El objetivo de este estudio fue determinar los niveles de resistencia al desalojo con pruebas de microtensión y análisis topográfico con microscopia electrónica de barrido. Material y métodos: 20 bloques de esmalte bovino fueron expuestos superficialmente a soluciones acondicionadoras (ácido ortofosfórico al 37%) con y sin agente desproteinizante (NaClO al 5.25%); finalmente, brackets individuales de ortodoncia fueron cementados con sistemas adhesivos y resinas compuestas de casas comerciales (Ormco y 3M). Las pruebas de resistencia al desalojo fueron realizadas con una máquina de fuerzas universales y el análisis topográfico con microscopia electrónica de barrido. Resultados: El uso del NaClO al 5.25% y la marca Ormco tuvieron estadísticamente los mejores niveles de adhesión que el grupo sin desproteinización y la casa comercial 3M, respectivamente. La topografía adamantina expuesta al agente desproteinizante mostró características de superficie relacionadas con el patrón de grabado tipo I. Conclusión: El uso de un agente desproteinizante (NaClO 5.25%) así como una marca comercial (Ormco) en particular podrían definir el aumento en los niveles de adhesión en superficies adamantinas con aparatología ortodóncica convencional (AU)
Introduction: Nowadays, patients require conventional fixed orthodontic treatment, which uses adhesive procedures related to the dentinal denture surface. Although there are different adhesive techniques that can offer adequate levels of bonding resistance, the use of NaClO as a deproteinizing agent has not been well defined in cementing materials in conventional orthodontic appliances. Objective: The objective of this study was to determine the levels of bond resistance using micro tension tests and topographic analysis with scanning electron microscopy. Material and methods: Twenty-blocks of bovine enamel were exposed superficially to conditioning solutions (37% orthophosphoric acid) with and without deproteinizing agent (5.25% NaClO); finally, individual orthodontic brackets were cemented with adhesive systems and resin composites of different trademarks (Ormco and 3M). Bonding resistance tests were performed with a universal force machine and topographic analysis was made with scanning electron microscopy. Results: The use of 5.25% NaClO and the Ormco brand had statistically better levels of adhesion than the group without deproteinization and the 3M brand, respectively. Adamantine topography exposed to the deproteinizing agent showed surface characteristics related to the type I etching pattern. Conclusion: The use of a deproteinizing agent (NaClO 5.25%) as well as a trademark (Ormco) in particular conditions could define the increase in adhesion levels on adamantine surfaces with conventional orthodontic appliances (AU)
Subject(s)
Sodium Hypochlorite/chemistry , Acid Etching, Dental , Dental Bonding , Orthodontic Brackets , Dental Enamel/drug effects , Phosphoric Acids , Surface Properties , Tensile Strength , In Vitro Techniques , Microscopy, Electron, Scanning , Cross-Sectional Studies , Data Interpretation, Statistical , Composite ResinsABSTRACT
Este estudo teve por finalidade avaliar a influência dos cimentos endodônticos com um protocolo de irrigação na resistência de união sobre a estrutura dentinária das paredes da câmara pulpar de dentes bovinos restaurados imediatamente e após 7 dias do tratamento endodôntico. Foram avaliados os cimentos endodônticos: Cimento à base de resina epoxy (AH Plus Dentsply, DeTrey, Konstanz- Alemanha) e Cimento de óxido de zinco e eugenol (Endofill Dentsply Ind.com. LTDA Brasil). Para a realização das restaurações foi utilizado o sistema adesivo Single Bond 2® (3M/ESPE) e a resina composta Z 350TM (3M/ESPE). 60 faces vestibulares da câmara pulpar de dentes bovinos foram distribuídos aleatoriamente em 4 grupos experimentais (G1-AHPlus Imediato; G2-AHPlus Mediato; G3-OZE Imediato; G4-OZE Mediato) e 2 controles (G5- NaOCl + EDTA Imediato e G6-NaOCl + EDTA Mediato). O protocolo de irrigação endodôntica deu-se através da imersão dos espécimes em solução de hipoclorito de sódio a 2.5% por 30 minutos e em EDTA 17% por 3 minutos. Os cimentos testados estiveram em contato com a parede dentinária pelo tempo de presa inicial, seguido de limpeza com algodão embebido em álcool 70% por 1 minuto. Os grupos experimentais de restauração mediata foram mantidos em estufa a 37ºC por 7 dias. Após o corte e a obtenção dos palitos de +/-1,0 mm² foi aplicado o teste de microtração na Máquina de Ensaios Universal e, em seguida, observados em microscópio óptico para classificação da fratura. Os valores da resistência de união foram submetidos ao teste não-paramétrico Wilcoxon-Mann-Whitney comparando dois a dois grupos a um nível de significância de 5%. Os resultados mostraram que o grupo G5 obteve menor valor de resistência de união, com diferença estatisticamente significativa (p<0,05) para os demais. O padrão de fratura mais observado nos grupos foi a coesiva em camada híbrida. Conclui-se que a associação NaOCl + EDTA diminui a resistência de união nas restaurações imediatas e que os cimentos endodônticos não alteraram a resistência de união nos períodos testados (AU).
This study aimed to evaluate the influence of endodontic sealer with an irrigation protocol on the bond strength on the dentinal structure of the pulp chamber walls of bovine teeth restored immediately and after 7 days of endodontic treatment. Endodontic sealer were evaluated: epoxy resin-based sealer (AH Plus - Dentsply, DeTrey, Konstanz- Germany) and zinc oxide and eugenol sealer (Endofill - Dentsply Ind.com. LTDA - Brazil). To perform the restorations, the Single Bond 2® adhesive system (3M / ESPE) and the composite resin Z 350TM (3M / ESPE) were used. 60 vestibular faces of the pulp chamber of bovine teeth were randomly assigned to 4 experimental groups (G1-AHPlus Immediate; G2-AHPlus Mediato; G3-OZE Immediate; G4-OZE Mediato) and 2 controls (G5- NaOCl + EDTA Immediate and G6- NaOCl + EDTA Mediato). The endodontic irrigation protocol was carried out by immersing the specimens in 2.5% sodium hypochlorite solution for 30 minutes and in 17% EDTA for 3 minutes. The tested sealers were in contact with the dentin wall for the initial setting time, followed by cleaning with cotton soaked in 70% alcohol for 1 minute. The experimental groups of mediated restoration were kept in an oven at 37ºC for 7 days. After cutting and obtaining the +/- 1.0 mm² toothpicks, the microtensile test was applied to the Universal Testing Machine and then observed under an optical microscope to classify the fracture. The bond strength values were subjected to the non-parametric Wilcoxon-Mann-Whitney test comparing two to two groups at a significance level of 5%. The results showed that the G5 group had a lower bond strength value, with a statistically significant difference (p <0.05) for the others. The most observed fracture pattern in the groups was cohesive in a hybrid layer. It is concluded that the association NaOCl + EDTA decreases the bond strength in immediate restorations and that endodontic sealer did not change the bond strength in the tested periods (AU).
Subject(s)
Humans , Root Canal Obturation , Root Canal Preparation , Retreatment , Dental Pulp Cavity , Zinc Oxide-Eugenol Cement/chemistry , Analysis of Variance , Statistics, Nonparametric , Radiography, Dental, Digital/instrumentation , MolarABSTRACT
Aim: This study aims to evaluate the effect of two bioflavonoids (epigallocatechin-3-gallate [EGCG] and catechin) and a protein inhibitor (chlorhexidine [CHX]) on the immediate and delayed microtensile bond strength of self-etch and total-etch adhesive systems to sound dentin. Materials and Methods: The occlusal surfaces of 96 mandibular human third molar teeth specimens were ground after removal of the excess tissues, to expose the middle dentin. The dentin specimens were randomly allocated into four groups, each consisting of 24 teeth (n = 24) according to the application of the enzyme inhibitor. The adhesive system used in this study was Adper easy bond, a self-etch adhesive system, and Adper Single Bond 2, a total-etch adhesive system. Microtensile bond strength testing was conducted using thermocycler 2000, Heto-Holten A/S. Results: All the three enzyme inhibitors increase the bond strength values of the resin–dentin interphase when used during dentin bonding. The EGCG enzyme inhibitor has shown the highest immediate bond strength to dentin when used with both the adhesive systems.
ABSTRACT
Objective: To determine the shear bond strength of different adhesive systems to superficial and deep dentin under simulated pulpal pressure. Methods: Occlusal surfaces of 72 sound extracted noncarious human molars were ground to obtain flat dentin surfaces(36 superficial and 36 deep dentin). Each dentin groups was randomly asssigned into 3 groups(n = 12): Clearfil SE Bond(SE), Clearfil S3 Bond(S3) and Prime&Bond NT(PB). All of samples were tested under simulated pulpal pressure. After bonding procedures with 3 adhesives respectively,all samples were covered with nail vanishi. The shear bond strength was tested after the samples stored for 24 h under simulated pulpal pressure. Results: The bond strength of PB to superficial and deep was (17. 11 ± 2. 71) and(11. 13 ± 3. 60) MPa(P < 0. 05),that of SE (16. 53 ± 5. 29) and (14. 78 ± 4. 53) MPa(P> 0. 05),S3 (9. 08 ± 1. 74) and (8. 43 ± 1. 41) MPa(P> 0. 05). Conclusion: Bond strengths of phosphoric acid etching system decreases with an increase of dentin depth, that of two-step self-etch adhesive system is not affected by the depth.
ABSTRACT
This study evaluated the effect of chlorhexidine dentin treatment on shear bond strength (SBS) of adhesive systems after different storages. The work included 144 third molars that had their dentin exposed and were divided in 6 groups: G1 (ASB+CHX: Adper Scotchbond 1XT + chlorhexidine 2 % prior Primer); G2(ASB); G3 (APP+CHX: Adper Prompt L-Pop + CHX); G4(APP); G5 (SBU+CHX: Single Bond Universal + CHX); and G6(SBU). Resin build-up was performed and teeth were subdivided regarding storage times (n=8): 72 h, 3 and 6 months. Next, SBS test was performed. At 72 hours, all equivalent groups (same adhesive system, different dentin treatment) showed no significant difference in SBS (P.05). Self-etch adhesive groups (with or without CHX) presented lower SBS compared to other systems (P.05). After 3 and 6 months, all CHX-treated groups presented significantly higher SBS compared to equivalent non-treated groups (P.05). For both storage times, Single Bond Universal presented the highest SBS values within the same dentin treatment (P.05), while Adper Scotchbond and Adper Prompt-L-Pop were not significantly different among them, also within the same dentin treatments [3 months (with CHX: P=.966; without: P=.958) and 6 months (with CHX: P =.887; without: P=.990)]. CHX Dentin disinfection is indicated for all classes of adhesives studied.
Este estudio evaluó el efecto del tratamiento de la dentina con clorhexidina sobre la resistencia al cizallamiento (SBS) de sistemas adhesivos después de diferentes almacenamientos. Se removió el esmalte oclusal a 144 terceros molares y se dejó su dentina media expuesta, posteriormente se dividieron al azar en 6 grupos: G1 (ASB + CHX: Adper Scotchbond 1XT + clorhexidina 2 % antes del Primer); G2 (ASB); G3 (APP + CHX: L-Pop + CHX de Adper); G4 (APP); G5 (SBU + CHX: Single Bond Universal + CHX); y G6 (SBU). Se realizó la aplicación de la resina compuesta y se subdividieron los grupos con respecto a los tiempos de almacenamiento (n = 8): 72h, 3 y 6 meses. A continuación, se realizó la prueba SBS. A las 72 horas, todos los grupos equivalentes (el mismo sistema adhesivo, diferentes tratamientos de dentina) no mostraron diferencias significativas en los valores de SBS (P.05). Los grupos de adhesivo de auto-grabado (con o sin CHX) presentaron valores de SBS más bajos en comparación con otros sistemas (P.05). Después de 3 y 6 meses, todos los grupos tratados con CHX presentaron valores de SBS significativamente mayores en comparación con los grupos no tratados equivalentes (P.05). Para ambos tiempos de almacenamiento, Single Bond Universal presentó los valores de SBS más altos dentro del mismo tratamiento dentinario (P.05), mientras que el Adper Scotchbond y el Adper Prompt-L-Pop no fueron significativamente diferentes entre ellos, también dentro de los mismos tratamientos dentinarios 3 meses (con CHX: P = .966, sin: P = .958) y 6 meses (con CHX: P = .887; sin: P = .990). La desinfección de la dentina con CHX está indicada para todas las clases de adhesivos estudiados.
Subject(s)
Humans , Anti-Infective Agents, Local/pharmacology , Chlorhexidine/pharmacology , Dental Cements/chemistry , Dentin , Dental Materials/chemistry , Materials Testing , Shear Strength , Tensile Strength , Time FactorsABSTRACT
Se realizó un estudio in vitro donde se evaluaron once sistemas adhesivos, para establecer si las condiciones de trabajo clínico favorecen su eficiencia. Se plantea que los sistemas adhesivos autoacondicionantes presentan menor estabilidad térmica que los convencionales. Determinar el comportamiento térmico de once sistemas adhesivos sometidos a diferentes rangos de temperatura en ambientes con 100 % de humedad, agua acidulada, humedad ambiental, saliva artificial y la correlación con su composición. Se utilizaron adhesivos autograbantes y convencionales, se prepararon muestras en cápsulas de aluminio pequeñas y se fotopolimerizaron con una lámpara LED. Se les realizó el estudio de espectroscopía infrarrojo con transformada de Fourier (FT-IR), asignando las bandas de absorción de los grupos funcionales orgánicos de cada compuesto, correspondientes a los grupos químicos que poseen. Posteriormente fueron sometidas a examen termogravimétrico entre temperatura ambiente y 500 °C para establecer un patrón de comportamiento térmico en ambiente inerte y luego de permanecer en agua acidulada, 100 % humedad, humedad ambiental y saliva artificial. Los termogramas informaron las temperaturas de descomposición y los porcentajes de pérdida de masa. Se correlacionaron los resultados del estudio de FT-IR infrarrojo con el comportamiento térmico de los sistemas adhesivos. Se observó pérdida de masa, eficiencia de la polimerización y cantidad de masa residual. Se observaron dinámicas de degradación diferentes por el diseño de las curvas y por los cambios en la línea base. Conclusión: Los sistemas adhesivos de ambos grupos analizados, presentaron elevado grado de polimerización. Sin embargo, el efecto producido por las condiciones a las cuales fueron sometidos, depende del tipo de adhesivo, siendo que, los adhesivos convencionales, a diferencia de los autoacondicionantes, se degradan en menor extensión, reflejado por su mayor estabilidad térmica.
An in vitro study of eleven adhesive systems was carried out to establish if clinical work conditions could improve their efficiency. It has been observed that self-etch adhesive systems have less thermal stability than conventional ones. As a consequence, early replacement of unsatisfactory aesthetic restorations is needed. The objectives of this work were to determine the thermal behavior of eleven polymeric adhesive systems under different rates of temperatures and a variety of conditions such as 100 % humidity, presence of acidulated water (pH 3), environmental relative humidity and artificial saliva. Another aim was to establish if these factors are correlated with the adhesive systems composition. For each type of adhesive system, samples were prepared in small aluminum caps and polymerized with a LED lamp. All samples were analyzed with the Fourier-Transform Infrared Spectroscopy (FT-IR) method, which assigned absorption bands to organic functional groups of each compound corresponding to their chemical type. Subsequently, a thermogravimetric analysis was performed in a range temperature from room temperature to 500 °C in order to establish thermal behavior in an inert environment and after staying in acidulated water, 100 % humidity, environmental humidity and artificial saliva. Thermograms were obtained to collect data about decomposition temperatures and loss of mass percentages. The FT-IR study results were correlated with the adhesive systems thermal behavior. Thermogram images showed loss of mass, polymerization efficiency and residual mass amount. The different degradation dynamics were analyzed according to curve designs and baseline changes. Both groups of adhesive systems revealed high polymerization degrees. Nevertheless, the effect produced by the conditions in which they were subjected depends on the type of adhesive. Conventional adhesives, in contrast to self-etch adhesives, degraded in a minor extension as a result of their higher thermal stability.
Subject(s)
Dental Bonding , Dentin-Bonding Agents/chemistry , Hydrolysis , Temperature , Composite Resins/chemistry , Hydrogen-Ion Concentration , In Vitro Techniques , Materials Testing , Spectroscopy, Fourier Transform InfraredABSTRACT
A adição de corantes fluorescentes a adesivos odontológicos possibilita a investigação da distribuição espacial desses materiais na interface dente-restauração, utilizando-se a microscopia confocal de varredura a laser (MCVL). A literatura indica falta de padronização na aplicação de agentes fluorescentes com tal finalidade. Esse estudo sistematizou estratégias para a adição de rodamina B (RB) e fluoresceína sódica (FS) a um sistema adesivo convencional de três passos, Adper Scotchbond Multi-Purpose (MP), e um autocondicionante de dois passos, Clearfil SE Bond (SE), considerados "padrão-ouro" na Odontologia. Os objetivos principais foram (a) determinar a menor faixa de concentrações de RB e FS necessária para produzir imagens satisfatórias da interface dentina-adesivo e (b) avaliar o efeito da adição desses corantes sobre algumas propriedades das resinas. Os adesivos foram marcados com RB ou FS em concentrações decrescentes (0,5, 0,1, 0,02 e 0,004 mg/mL) por meio de um método de dispersão semidireto. O comportamento fotofísico/ fluorescente dos adesivos marcados foi investigado por espectroscopia de fotoluminescência e MCVL. Paralelamente, avaliaram-se os adesivos quanto ao grau de conversão (GC) e ao ângulo de contato (AC). Tanto os resultados de GC como os de AC foram submetidos à análise de variância com dois fatores (adesivo e tratamento) com α = 0,05, seguida de teste post-hoc de Tukey. Os máximos comprimentos de onda de emissão e de excitação da RB e da FS foram influenciados pelo meio polimérico e pela concentração de corante de modo geral. A MCVL preliminar de amostras de adesivo polimerizado, realizada sob condições experimentais padronizadas, mostrou que o comportamento fluorescente da RB em MP e SE foi muito semelhante na mesma concentração de corante, mas o mesmo não pôde ser dito do comportamento da FS, que foi notavelmente inferior no adesivo autocondicionante, SE, na concentração mais alta. Em dentina, os adesivos preparados com RB nas concentrações-alvo de 0,1 e 0,02 mg/mL apresentaram fluorescência ótima; já aqueles preparados com 0,004 mg/mL produziram fraco sinal. Adesivos preparados com FS a 0,5 mg/mL apresentaram ótima fluorescência na interface de adesão, enquanto que concentração menor desse corante não produziu sinal suficiente. Padrões morfológicos aparentemente atípicos foram observados na interface de adesão, quando da associação do adesivo SE com o corante FS. A adição de RB e FS nas quatro concentrações indicadas aos adesivos MP e SE não afetou o GC nem o AC em comparação com os grupos de controle correspondentes. Em suma, a RB mostra-se um corante mais versátil que a FS na avaliação morfológica das interfaces dentina-MP e dentina-SE via MCVL. A menor faixa de concentrações de RB nos adesivos MP e SE, na qual é possível produzir imagens satisfatórias das interfaces, situa-se entre 0,10,02 mg/mL. Já o corante FS deve ser adicionado a esses adesivos a pelo menos 0,5 mg/mL para produzir níveis de fluorescência satisfatórios na interface de adesão. A não ocorrência de efeitos deletérios sobre a polimerização e a molhabilidade das resinas estabelece uma margem de segurança para a incorporação desses agentes fluorescentes (em concentração ≤ 0,5 mg/mL) nesses sistemas monoméricos.(AU)
The addition of fluorescent dyes to dental adhesives makes it possible to investigate the spatial distribution of such resin-based materials in the tooth-restoration interface, using confocal laser scanning microscopy (CLSM). Literature indicates a lack of standardization on the application of fluorescent agents for this purpose. This work presents strategies for adding rhodamine B (RB) and fluorescein sodium salt (FS) to a three-step etch-and-rinse adhesive system, Adper Scotchbond Multi-Purpose (MP), and a two-step self-etching one, Clearfil SE Bond (SE), both regarded as "gold standard" in restorative dentistry. The main objectives were (a) to determine the lowest range of RB and FS concentrations required to produce suitable images of the dentin-adhesive interface via CLSM and (b) to investigate potential effects of addition of these dyes on some resin properties. The adhesives were labeled with RB or FS at decreasing concentrations (0.5, 0.1, 0.02 and 0.004 mg/mL) by means of a semi-direct dispersion method. The photophysical/fluorescent behavior of the labeled resins was investigated by photoluminescence spectroscopy and by CLSM. The adhesives were also investigated with regards to the degree of conversion (DC) and contact angle (CA). A two-way ANOVA of "adhesive" and "treatment" was conducted on DC and CA separately, followed by Tukey's test. The maximum emission and excitation wavelengths of RB and FS were influenced by the host polymer and the dye concentration in general. The preliminary CLSM of cured adhesive samples, performed with standardized settings, showed that the fluorescent behavior of RB in MP and SE was very similar in the same dye concentration, unlike the behavior of FS, which was lower in the self-etching adhesive for the highest dye concentration. In dentin, the adhesives prepared with RB at the target concentrations of 0.1 and 0.02 mg/mL presented optimal fluorescence; those with 0.004 mg/mL produced poor signal. Adhesives prepared with FS at 0.5 mg/mL presented optimal fluorescence at the bonding interface, whereas lower concentrations of FS did not produce sufficient signal. Atypical morphological features were observed at the bonding interface, when adhesive SE was used with FS. The addition of RB and FS at the four decreasing concentrations to adhesives MP and SE did not affect DC or CA compared to the corresponding controls. In short, RB is more versatile than FS for the morphological characterization of dentin-MP and dentin-SE interfaces via MCVL. The lowest range of RB concentrations in adhesives MP and SE that can produce suitable images of the bonding interface lies between 0.10.02 mg/mL. The dye FS should be added to these adhesives at 0.5 mg/mL at least to produce satisfactory fluorescence levels at the bonding interface. Since negative effects on polymerization and wettability of the resins were not observed, the use of RB and FS (in concentration ≤ 0.5 mg/mL) together with MP and SE should be reliable in terms of resin properties.(AU)
Subject(s)
Fluorescein/chemistry , Fluorescent Dyes/chemistry , Resin Cements/chemistry , Rhodamines/chemistry , Analysis of Variance , Ethanol/chemistry , Microscopy, Confocal , Reference Values , Reproducibility of Results , Self-Curing of Dental Resins/methods , Spectrometry, Fluorescence , Spectrophotometry, InfraredABSTRACT
Objetivo: Avaliar o efeito da associação de tratamentos de superfície e agentes de união na resistência adesiva de reparos em resinas compostas. Materiais e Métodos: Cento e vinte espécimes de resina composta microhíbrida (Filtek Z250) envelhecidas em água destilada a 37 ºC por 6 meses foram submetidas a diferentes tratamentos de superfície antes do procedimento de reparo. Dez espécimes foram divididos aleatoriamente em 12 grupos: não tratados / sem agente de união (controle negativo); jateamento/sem agente de união; silano /sem agente de união; não tratado / adesivo de condicionamento ácido total; não tratado/ adesivo autocondicionante 1 passo; Não-tratado/adesivo autocondicionante 2 passos; Jateamento / adesivo de condicionamento ácido total; Jateamento / adesivo autocondicionante 1 passo; Jateamento / adesivo autocondicionante 2 passos; silano / adesivo de condicionamento ácido total; silano / adesivo autocondicionante 1 passo; silano / adesivo autocondicionante 2 passos. A resistência adesiva do procedimento de reparo com resina composta foi mensurada pelo teste de microcisalhamento. Resultados: ANOVA a 2 fatores e o teste de Tukey (α = 0,05) demonstraram diferença estatística significante entre os tratamentos de superfície e os sistemas adesivos. Conclusão: Os tratamentos de superfície foram capazes de aumentar a eficácia do reparo em resina composta apesar do agente de união utilizado em superfícies não tratadas. Os agentes de união autocondicionantes foram mais eficazes nos procedimentos de reparo quando não foi realizado tratamento de superfície. (AU)
Objective: The objective of this study was to evaluate the effect of combination of surface treatments and bonding agents on bond strength of repairs on aged composite resin. Materials and Methods: One hundred twenty microhybrid composite samples (Filtek Z250) aged in distilled at 37 ºC water for six months were submitted to different surface treatment prior to resin repairs. Ten specimens were randomly divided into 12 groups: non-treated/no bonding agent (negative control), sandblasting /no bonding agent, silane/ no bonding agent, non-treated/ etch-and-rinse; non-treated/one-step self-etch; non-treated/ two-step self-etch; sandblasting/etch-and-rinse; sandblasting/one-step self-etch; sandblasting/ two-step self-etch; silane coupling agent/etch-andrinse; silane coupling agent/ one-step self-etch; silane coupling agent/two-step self-etch. Micro shear testing was performed to bond strength assessment. Results: Two-way ANOVA and Tukey's test (α = 0.05) demonstrated significant difference between the surface treatments and adhesive systems. Only no treated surface/etchand-rinse group showed lower bond strength values when compared to other groups. Conclusion: The surface treatments were capable to increase the effectiveness of the repair in composite resin despite bonding agent used in untreated surfaces. The self-etching bonding agents were more effective on bonding to repair procedures when no surface treatment was performed. (AU)
Subject(s)
Composite ResinsABSTRACT
Abstract The purpose of this study was to evaluate the microshear bond strength of ceramic prosthetic structures reinforced by lithium disilicate cemented with resin cement under conditions of different surface treatments and adhesive systems. Seventy-two rectangular blocks of lithium disilicate (6.5 mm long × 5 mm wide × 1 mm thick) were fabricated, air abraded with 50-μm Al2O3 particles and divided into six groups (n=12) depending on the surface pretreatments. The groups were as follows: 10HF/S/SBM: 10% hydrofluoric acid etched for 20 s (10HF) + silane (S) + Adper Scotchbond Multi-Purpose (SBM); 10HF/S/SB: 10HF + S + Single Bond Universal (SB); 10HF/SBM; 10HF/SB; S/SBM and S/SB. Two 1-mm-long plastic tubes were placed on the specimens, filled with RelyX ARC resin cement and cured for 20 s per tube. The plastic tube was removed, and the microshear bond strength was tested. Data were submitted to analysis of variance and Tukey's tests (α=0.05). Fractured specimens were observed under optical microscopy. For both adhesives, the bond strengths (MPa) of groups treated with acid-etching and silane (10HF/S/SB: 24.82, 10HF/S/SBM: 24.90) were higher (p<0.001) than those of groups treated with acid-etching (10HF/SB: 16.47, 10HF/SBM: 19.94) only or only silane (S/SB: 18.42, S/SBM: 13.24). All groups showed a predominance of failure adhesive. The silanization should be a clinical step in cementing ceramic structures reinforced by lithium disilicate, even with the application of universal adhesive that contains silane in its formulation.
Resumo O objetivo neste estudo foi avaliar a resistência de união ao microcisalhamento de estruturas protéticas cerâmicas reforçadas por dissilicato de lítio cimentadas com cimento resinoso sob diferentes tratamentos de superfície e sistemas adesivos. Setenta e duas barras retangulares de dissilicato de lítio (6,5 mm de comprimento × 5 mm de largura × 1 mm de espessura) foram fabricadas, tratados com partículas de Al2O3 (50 μm) e dividido em seis grupos (n=12) dependendo dos pré-tratamentos de superfície. Os grupos foram como se segue: 10HF/S/SBM: condicionamento com ácido fluorídrico 10% durante 20 s (10HF) + silano (S) + Adper Scotchbond Multi-Purpose (SBM); 10HF/S/SB: 10HF + S + Single Bond Universal (SB); 10HF/SBM; 10HF/SB; S/SBM; e S/SB. Dois tubos plásticos cilíndricos de 1 mm de comprimento foram colocados sobre os espécimes, preenchidos com cimento RelyX ARC e fotoativado durante 20 s por tubo. Os tubos plásticos foram removidos e a resistência de união ao microcisalhamento foi testada. Os dados foram submetidos à análise de variância e ao teste de Tukey (α=0,05). Espécimes fraturados foram observados sob microscopia óptica. Para ambos os adesivos, a resistência de união (MPa) dos grupos tratados com condicionamento ácido e silano (10HF/S/SB: 24,82, 10HF/S/SBM: 24,90) foram superiores (p<0.001) aos grupos tratados com condicionamento ácido apenas (10HF/SB: 16,47, 10HF/SBM: 19,94) ou apenas silano (S/SB: 18,42, S/SBM: 13,24). Todos os grupos apresentaram uma predominância de falha adesiva. A silanização deve ser um passo clínico em cimentação de estruturas cerâmicas reforçadas por dissilicato de lítio, mesmo com a aplicação do adesivo universal que contém em sua formulação um silano.
Subject(s)
Dental Porcelain/chemistry , Materials Testing , Surface PropertiesABSTRACT
ABSTRACT Introduction: the clinical success of adhesive systems is based on the use of a responsible for creating microporosity in the dental structure acid and arises assess in vitro the degree of microfiltration in direct restorations with cavities class V where two adhesive systems differently used composition and at different periods of time. Methods: in the cervical third of 60 third molars extracted by therapeutic indication performed by diamond instruments, two cavities one on the vestibular side and one on the palatal or lingual side; It separated into two groups of 30 in the first acid conditioning was performed and then applied -Voco Admire bond while the second group Futurabond-Voco applied; both groups were restored with resin composite Admira-Voco, each group was divided into two subgroups of 15 subgroups A were subjected to thermal cycling for 10800 cycles and 5400 cycles B subgroups. It concluded these periods proceeded to staining with methylene blue and then a cut is made lengthwise to assess the income of the dye in the interface formed; this pigmentation was evaluated and measured under stereomicroscope. Results: the obtained data were statistically analyzed by Tukey′s test, which showed the existence of differences between the groups evaluated, so evident at the level of cervical margin with a p > 0.05 Conclusions: it is evident that the artificial aging increased microfiltration resin composite restorations regardless of the type of adhesive system used.
RESUMEN Introducción: el éxito clínico de los sistemas adhesivos está basado en el empleo de un ácido responsable de crear microporosidades en la estructura dental, así se plantea evaluar in vitro el grado de microfiltración existente en restauraciones directas con cavidades clase V donde se emplean dos sistemas adhesivos de diferente composición y en diferentes períodos de tiempo. Métodos: en el tercio cervical de 60 terceros molares extraídos por indicación terapéutica se realizaron, mediante instrumentos diamantados, dos cavidades: una en la cara vestibular y otra en la cara palatina o lingual, y fueron separados en dos grupos; en el primero se efectuó acondicionamiento ácido y luego se aplicó Admira bond- Voco, mientras que en el segundo se aplicó Futurabond NR-Voco. Ambos grupos fueron restaurados con resina compuesta Admira-Voco, cada grupo fue dividido en dos subgrupos de 15, los subgrupos A fueron sometidos a termociclado por 10800 ciclos y los subgrupos B por 5400 ciclos. Concluidos estos períodos, se procedió a su tinción con azul de metileno y luego se efectuó un corte en sentido longitudinal para evaluar el ingreso del colorante en la interface formada; esta pigmentación fue evaluada y medida bajo microscopio estereoscópico. Resultados: los datos obtenidos fueron analizados estadísticamente mediante el test de Tukey, que demostró la existencia de diferencias entre los grupos evaluados, de forma más evidente a nivel del margen cervical, con un p > 0,05. Conclusiones: se evidencia que el envejecimiento artificial aumentó la microfiltración de las restauraciones de resina compuesta independientemente del tipo de sistema adhesivo empleado.
Subject(s)
Composite Resins , MicrostrainingABSTRACT
The aim of this study was to evaluate the effect of 2% chlorhexidine (CHX) application during the bonding protocol on microshear bond strength of two adhesive systems, after storage in different media. Seventy-two human molars had their crowns cut in half and embedded in PVC cylinders with acrylic resin. The specimens were randomly divided into experimental groups (n=12) according to the adhesive system (Ambar and Single Bond 2), use of CHX in the bonding protocol, and time interval (24 h and 15 days) in the storage media (distilled water, mineral oil and 1% sodium hypochlorite - NaOCl). Adhesive systems were applied in accordance to manufacturers' recommendations, with or without the use of CHX, and resin composite (Z350 XT) cylinders were placed on the hybridized dentin. After photoactivation, the specimens were stored in distilled water, mineral oil and 1% NaOCl for 24 h and 15 days. Microshear bond strength was determined at a crosshead speed of 0.5 mm/min until fracture. The bond strength data were analyzed statistically by 4-way ANOVA and Tukey's test (α=5%). Use of CHX in the bonding protocol did not cause loss of bond strength in any of the evaluated situations, irrespective of time and storage medium. The storage medium had no influence on bond strength values after 15 days when the bond protocol without CHX application was used. However, the use of CHX in the protocol influenced negatively the bond strength values for Single Bond 2 after 15 days storage in distilled water and 1% NaOCl.
Resumo O objetivo deste trabalho foi avaliar o efeito da aplicação de clorexidina 2% (CHX) na resistência de união (RU) ao microcisalhamento de dois sistemas adesivos após armazenagem em diferentes meios. Setenta e duas coroas de molares humanos foram cortadas e incluídas em cilindros de PVC. Os espécimes foram distribuídos aleatoriamente nos grupos (n=12), segundo o sistema adesivo (Ambar e Single Bond 2), uso ou não de CHX e o tempo (24 h e 15 dias) e meio de armazenamento (água destilada, óleo mineral e hipoclorito de sódio 1% - NaOCl). Os sistemas adesivos foram aplicados de acordo com as recomendações do fabricante, com e sem o uso de CHX, e cilindros de resina composta (Z350 XT) foram colocados sobre a dentina já hibridizada. Após a fotoativação, os espécimes foram armazenados em um dos três meios (água destilada, óleo mineral e NaOCl a 1%) a 37 ºC por 24 h e 15 dias. RU foi determinada pelo ensaio de microcisalhamento, com velocidade de 0,5 mm/min. Os dados foram analisados por ANOVA a quatro fatores e teste de Tukey (α=5%). O uso da CHX não provocou perda de RU em nenhuma das situações avaliadas, independentemente do tempo e meio de armazenamento. Não houve influência do meio de armazenamento na RU após 15 dias quando foi utilizado o protocolo adesivo sem a aplicação de CHX. Porém, a utilização de CHX influenciou negativamente os valores de RU para o Single Bond 2 após 15 dias de armazenamento em água destilada e NaOCl a 1%.
Subject(s)
Chlorhexidine/pharmacology , Dental Cements , DentinABSTRACT
This paper presents the state of the art of self-etch adhesive systems. Four topics are shown in this review and included: the historic of this category of bonding agents, bonding mechanism, characteristics/properties and the formation of acid-base resistant zone at enamel/dentin-adhesive interfaces. Also, advantages regarding etch-and-rinse systems and classifications of self-etch adhesive systems according to the number of steps and acidity are addressed. Finally, issues like the potential durability and clinical importance are discussed. Self-etch adhesive systems are promising materials because they are easy to use, bond chemically to tooth structure and maintain the dentin hydroxyapatite, which is important for the durability of the bonding.
Este artigo apresenta o estado da arte de sistemas adesivos autocondicionantes. Quatro temas são apresentados nesta revisão: o histórico desta categoria de agentes de união, o mecanismo de adesão, as características/propriedades, e a formação da zona ácido-base resistente nas interfaces esmalte/dentina-adesivo. Além disso, as vantagens relativas aos sistemas de condicionamento total ( etch-and-rinse ) e as classificações dos sistemas adesivos autocondicionantes de acordo com o número de passos e acidez são abordados. Por fim, são discutidas questões como a durabilidade potencial e a importância clínica. Sistemas adesivos autocondicionantes são materiais promissores porque são fáceis de usar, unem-se quimicamente à estrutura do dente e preservam a hidroxiapatita dentinária, o que é importante para a durabilidade da ligação.
Subject(s)
Humans , Dental Bonding/methods , Dentin-Bonding Agents/chemistry , Acid Etching, Dental , Materials Testing , Shear Strength , Stress, Mechanical , Surface Properties , Temperature , Time FactorsABSTRACT
To evaluate the microtensile bond strength (µTBS) of a fluoride-containing adhesive system submitted to a pH-cycling and storage time regimen for primary outcomes. As secondary outcomes the fluoride released amount was evaluated. Twelve dentin surfaces from sound third molar were divided into 2 groups according to adhesive systems: Clearfil SE Protect (PB) and Clearfil SE Bond (SE). Sticks obtained (1.0 mm2) from teeth were randomly divided into 3 subgroups according to storage regimen model: immediate (24h); 5-month deionized water (W); and pH-cycling model (C). All sticks were tested for µTBS in a universal testing machine. Fluoride concentration was obtained from 1-4 days and 30-day in W and 1-4 days in demineralization (DE)/remineralization (RE) solutions from C, using a fluoride-specific electrode. µTBS and fluoride released data were, respectively, submitted to ANOVA in a split plot design and Tukey, and Friedman' tests (a=0.05). There was no significant interaction between adhesive system and storage regimen for µTBS. W showed the lowest µTBS values. There was no significant difference between 24 h and C models for µTBS. There was no significant difference between adhesive systems. Failure mode was predominantly cohesive within composite for the 24 h and W, for the C group it was mixed for SE and cohesive within composite for PB adhesive system. Fluoride concentrations in the DE/RE solutions were less than 0.03125 ppm and not detected in W. In conclusion, the fluoride-containing adhesive system performed similarly to the regular one. Hydrolytic degradation is the main problem with both adhesive systems, regardless of fluoride contents.
O objetivo principal desse estudo foi avaliar a resistência de união à microtração de dois sistemas adesivos (com e sem flúor) após a ciclagem de pH e armazenagem em água deionizada. A quantidade de flúor liberada foi avaliada secundariamente. Doze terceiros molares hígidos foram separados em 2 grupos de acordo com o sistema adesivo: Clearfil SE Protect - com flúor (PB) e Clearfil SE Bond - sem flúor (SE). Os palitos (1 mm2) obtidos do mesmo dente foram aleatoriamente divididos em 3 subgrupos de acordo com o meio de armazenagem: em água deionizada por 24h ou 5 meses e ciclagem de pH. Os palitos foram tracionados em uma máquina de ensaio universal a 0,5 mm/min. A concentração de flúor foi analisada em água deionizada (1-4 dias e 30 dias) e na solução remineralizadora e desmineralizadora (1-4 dias) usando um eletrodo específico. Os dados de resistência de união e liberação de flúor foram, respectivamente, submetidos à Análise de Variância em esquema de parcela subdividida e ao teste de Friedman (a=0,05). Não houve nenhuma interação significativa na resistência de união entre os sistemas adesivos e os meios de armazenagem. Os menores valores de resistência de união à microtração foram encontrados para os palitos armazenados em água deionizada. Não houve nenhuma diferença significativa nos valores de resistência de união após 24h e ciclagem de pH. Nenhuma diferença significativa na resistência de união foi observada entre os 2 sistemas adesivos. O modo de falha foi predominantemente coesivo em compósito para os grupos armazenados em água por 24h ou 5 meses para ambos os sistemas adesivos. No grupo submetido à ciclagem, a falha foi mista para o SE e coesiva em compósito para o PB. A concentração de flúor nas soluções DE/RE foi menor que 0,03125 ppm e não detectada em água deionizada. Concluindo, o sistema adesivo com flúor (PB) apresentou performance similar ao sistema adesivo sem flúor (SE). A degradação hidrolítica foi o principal fator para ambos os sistemas adesivos, independente da adição de flúor.