ABSTRACT
Objective:To investigate the efficacy of robot-assisted femoral tunnel localization in reconstruction of the medial patellofemoral ligament (MPFL).Methods:A retrospective study was conducted to analyze the 36 patients who had been admitted to Department of Sports Medicine, The Fourth Hospital of Wuhan between January 2019 and January 2022 due to recurrent patellar dislocation. There were 15 males and 21 females; age: 23.5 (18.3, 29.0) years; number of dislocations: 2.5 (2.0, 3.0). They were stratified into 2 cohorts based on utilization of robot-assistance. In the observation group (17 cases), the femoral tunnel localization was robot-assisted in MPFL reconstruction; in the control group (19 cases), the femoral tunnel localization was guided by C-arm fluoroscopy in MPFL reconstruction. The 2 groups were compared in terms of operation time, frequency of guide wire placement, visual analogue scale (VAS) at postoperative 1 d, patellar tilt angle (PTA) and the disparity between actual femoral tunnel insertion and ideal tunnel insertion point (Sch?ttle point) at postoperative 1 to 3 d, and Lysholm knee score and International Knee Documentation Committee (IKDC) score at the last follow-up.Results:There was no significant difference in the preoperative general data between the 2 groups, showing comparability ( P>0.05). All patients were followed up for 12.0 (10.3, 13.0) months. In the observation group, the operation time [(64.1±16.7) min], frequency of guide wire placement [1.0 (1.0, 2.0) times], VAS [2.5 (2.0, 3.0) points], and disparity between actual femoral tunnel insertion and ideal tunnel insertion point [(4.7±1.2) mm] were significantly better than those in the control group [(84.2±19.7) min, 3.0 (2.0, 4.0) times, 3.5 (3.0, 4.0) points, and (6.1±1.2) mm] ( P<0.05). There was no statistical difference between the 2 groups in PTA, Lysholm knee score or IKDC score ( P>0.05). Conclusions:The short-term clinical efficacy of robot-assisted femoral tunnel localization is satisfactory in MPFL reconstruction. Compared with the intraoperative C-arm fluoroscopy, robot-assisted localization can decrease the frequency of guide wire placement, enhance femoral tunnel accuracy and efficiency, and alleviate more postoperative pain for the patients.
ABSTRACT
Objective:To evaluate the reliability of a region-locked 3D-printed template combined with a bi-directional matching scheme in assistance of screw placement for thoracolumbar fractures.Methods:From January 2019 to March 2023, 52 patients with thoracolumbar fracture were treated at Department of Orthopedics, The People's Hospital of Liyang. They were 29 males and 23 females, with an age of (58.2±13.3) years. They were divided into a template group and a free-hand group according to the different screw placements. In the template group of 25 cases, a region-locked 3D-printed template combined with a bi-directional matching scheme was used to assist the pedicle positioning; in the free-hand group of 27 cases, the free hand screw placement was assisted only by image data and C-arm fluoroscopy. The operation time, intraoperative fluoroscopy frequency, intraoperative blood loss, complications, and placement accuracy were compared between the 2 groups. Visual analogue scale (VAS), Oswestry disability index (ODI), and anterior height ratio of the injured vertebra were compared between preoperation, 1 week postoperation, and the final follow-up, as well as between the 2 groups.Results:There were no statistically significant differences in the preoperative general data between the 2 groups, showing comparability ( P>0.05). All patients were followed up for (11.2±4.2) months. The differences were not statistically significant between the 2 groups in intraoperative blood loss, rate of complications, VAS or ODI at preoperation, 1 week postoperation, or the final follow-up, or in anterior height ratio of the injured vertebra ( P>0.05). In the template group, the operation time [(80.1±18.5) min] was significantly longer than that in the free-hand group [(69.4±16.6) min], the intraoperative fluoroscopy frequency [2 (2, 3) times] significantly lower than that in the free-hand group [3 (3, 4) times], and the placement accuracy [98.4% (127/129)] significantly higher than that in the free-hand group [91.8% (112/122)] (all P<0.05). All patients showed significant improvements in VAS, ODI and anterior height ratio of the injured vertebra at postoperative 1 week compared with the preoperative values, and the improvements at the last follow-up were significantly larger than those at postoperative 1 week ( P<0.05). No injury to the spinal cord, nerve root or blood vessel was observed postoperatively. Conclusions:In the treatment of thoracolumbar fractures, the screw placement assisted by a region-locked 3D-printed template combined with a bi-directional matching scheme is better than free-hand screw placement in terms of improved accuracy and reduced fluoroscopy, but the former incurs longer operative exposure than the latter. There is no significant difference between the 2 methods of screw placement in clinical efficacy.
ABSTRACT
Objective:To compare the efficacy of pedicle screw placement between computer navigation guidance and freehand assistance in the surgical treatment of isthmic spondylolysis at the lumbar vertebrae.Methods:A retrospective study was conducted to analyze the 47 patients with bilateral isthmic spondylolysis at the L 5 vertebra who had been treated at Department of Spinal Surgery, The General Hospital of Xinjiang Military Command from January 2020 to April 2023. All were male patients with an age of (24.0±4.3) years. They were divided into a study group (13 cases subjected to pedicle screw placement assisted by computer navigation guidance) and a control group (34 cases subjected to pedicle screw placement assisted freehandedly). The 2 groups were compared in terms of surgical incision length, intraoperative bleeding, screw placement time, postoperative hospital stay, total hospitalization cost, postoperative complications, rate of screw reposition, angle between pedicle screw and upper endplate, angle between bilateral pedicle screws, and placement accuracy; the visual analogue scale (VAS) for pain, Japanese Orthopaedic Association (JOA) score for lumbar spine function, and Oswestry disability index (ODI) were also compared between preoperation, 1-week postoperation, and the last follow-up. Patient satisfaction was assessed according to the modified MacNab criteria, and internal fixation failure and isthmic healing were also evaluated at the last follow-up. Results:There were no statistically significant differences in the preoperative general data between the 2 groups, showing comparability ( P>0.05). The differences were not statistically significant in surgical incision length, intraoperative bleeding, screw placement time, postoperative hospital stay, or postoperative complications ( P>0.05). However, in the study group, the total hospitalization cost was significantly higher than that in the control group, the rate of screw reposition [7.7% (2/26)] significantly lower than that in the study group [26.5% (18/68)], the angle between pedicle screw and upper endplate and the angle between bilateral pedicle screws were both significantly smaller than those in the control group, and the placement accuracy [92.3% (24/26)] was significantly greater than that [70.6% (48/68)] in the control group (all P<0.05). All patients were followed up for 7.0 (5.0, 14.0) months. Patients in both groups showed significant improvements in VAS, JOA score, and ODI at postoperative 1 week and the last follow-up compared with the preoperative values, and the improvements at the last follow-up were significantly larger than those at postoperative 1 week ( P<0.05). According to the modified MacNab criteria at the last follow-up, patient satisfaction was rated as excellent in 10 cases, as good in 2 cases and as moderate in 1 case in the study group while as excellent in 27 cases, as good in 3 cases, as moderate in 3 cases and as poor in 1 case in the control group. In the study group, there were 1 case of internal fixation failure, 1 case of spine cutting-out by titanium cable, and 12 cases of bony healing of the isthmus; in the control group, there were 2 cases of internal fixation failure, 2 cases of spine cutting-out by titanium cable, and 29 cases of bony healing of the isthmus. Conclusions:In the surgical treatment of bilateral isthmic spondylolysis at the L 5 vertebra, computer navigation-guided pedicle screw placement is safe and reliable, showing an advantage of higher accuracy over freehand placement. It deserves clinical promotion due to its satisfactory therapeutic effects.
ABSTRACT
Digital intelligence technologies, including artificial intelligence, big data, surgical navigation, surgical robots, and virtual reality, have been widely used in basic and clinical research in trauma and orthopedics. In order to provide trauma orthopedists with a quick overview of the current application of these technologies, this paper elaborates on the orthopedic workflow of fracture open reduction and internal fixation, on the aspects of recognition and classification of fracture X-ray images, fracture fragment segmentation based on thin-slice CT images, virtual fracture reduction, 3D fracture line heatmaps, design of an anatomical locking plate, intelligent navigation and orthopedic surgical robots, fracture reduction robots, and surgical process visualization.
ABSTRACT
Objective:To investigate the value of digital medical 3D technology versus traditional 2D technology in the diagnosis and treatment of solid abdominal tumors in children. Methods:A total of 80 children with solid abdominal tumors who received surgical treatment guided by digital medical 3D technology at Guigang People's Hospital from January 2018 to January 2022 were included in the observation group. An additional 80 children with solid abdominal tumors who received surgical treatment guided by traditional 2D technology at the same hospital from January 2014 to December 2017 were included in the control group. Clinical efficacy was compared between the two groups.Results:The surgical time, intraoperative blood loss, postoperative exhaust time, postoperative hospital stay in the observation group were (111.8 ± 28.9) minutes, (26.8 ± 25.2) mL, (2.2 ± 1.2) days, (7.5 ± 1.4) days, respectively, which were significantly shorter or less than those in the control group [(193.1 ± 66.0) minutes, (86.2 ± 47.0) mL, (3.7 ± 0.9) days, (12.2 ± 3.5) days, t = 7.00, 6.88, 5.87, 7.53, all P < 0.05]. The complete surgical resection rate in the observation group was significantly higher than that in the control group [92.5% (74/80) vs. 81.3% (65/80), χ2 = 4.44, P < 0.05]. The incidence of complications in the observation group was significantly lower than that in the control group [6.3% (5/80) vs. 16.3% (13/80), χ2 = 4.00, P < 0.05]. Conclusion:The utilization of digital medical 3D technology in the surgical treatment of solid abdominal tumors in children can markedly decrease surgical time, reduce intraoperative blood loss, promote postoperative recovery, achieve a high surgical resection rate, and minimize postoperative complications.
ABSTRACT
Objective:To analyze the clinical efficacy of three-dimensional (3D) navigation-assisted percutaneous sacroiliac screw fixation in the treatment of Tile C1 pelvic fractures.Methods:A total of 12 patients with Tile C1 pelvic fractures who underwent percutaneous sacroiliac screw fixation assisted by 3D navigation in Liuzhou People's Hospital Affiliated to Guangxi Medical University from September 2019 to March 2022 were retrospectively analyzed. There were 8 males and 4 females, aged 43.08±16.93 years (range, 21-72 years). 24 patients with Tile C1 pelvic fractures who underwent fluoroscopy-assisted percutaneous sacroiliac screw internal fixation during the same period were selected as controls by pairing them according to age and sex in a ratio of 1:2. There were 15 males and 9 females, aged 45.75±11.69 years (range, 32-75 years). The operation time, intraoperative blood loss, number of screws, intraoperative fluoroscopy times, guide pin drilling times and pelvic function scores were compared between the two groups. The quality of pelvic fracture reduction was evaluated based on the Matta scoring criteria, the screw cut-out rate was calculated according to the Lonstein evaluation criteria, and the degree of postoperative heterotopic ossification was evaluated according to the Brooker grading system.Results:All patients were followed up for 18.1±4.7 months (range, 12-30 months). In the 3D navigation group, the operation time was 110.67±44.85 min, the number of intraoperative fluoroscopies was 24.42±9.94, and the number of guided needle drilling was 7.33±4.70, which was lower than 145.00±48.51 min, 75.75±29.47, and 13.92±5.78 in the fluoroscopically-assisted group, and the differences were statistically significant ( P<0.05). At the last follow-up, the Majeed pelvic function score of 3D navigation group was 89.08±3.89, and the excellent and good rate was 100% (12/12). The score of fluoroscopy-assisted group was 74.00±10.71, and the excellent and good rate was 79% (19/24). The difference was statistically significant ( χ2=10.23, P<0.001). The excellent and good rate of Matta grading was 92% (11/12) in the 3D navigation group and 79% (19/24) in the fluoroscopic assisted group, showing no significant difference between the two groups ( χ2=2.93, P=0.403). The screw cut-out rate and heterotopic ossification rate in the 3D navigation group were 17% (2/12) and 8% (1/12), which were lower than 71% (17/24) and 13% (3/24) in the fluoroscopy-assisted group, and the differences were statistically significant ( χ2=9.76, P=0.021; χ2=31.71, P<0.001). Conclusion:3D navigation-assisted percutaneous sacroiliac screw fixation for Tile C1 pelvic fractures can reduce the operation time and radiation exposure, improve the postoperative pelvic function, and reduce the incidence of screw cut-out and heterotopic ossification.
ABSTRACT
Objective:To investigate the effect of open reduction and internal fixation assisted by computer virtual surgery in the treatment of complex proximal humeral fracture.Methods:A retrospective case series study was performed on clinical data of 36 patients with complex proximal humeral fracture admitted to Dongfang Hospital Affiliated to Tongji University from January 2018 to June 2020. There were 13 males and 23 females, aged 22-86 years [(56.4±4.8)years]. They were all closed fractures. According to Neer classification, there were 20 patients with three-part fractures and 16 with four-part fractures. Precise pre-surgical designs made by using the digital orthopedic surgery planning system of the E-3D were applied to assist the implementation of precise fracture reduction and internal fixation with the locking plate. The fracture healing was observed. The effect of the real surgery assisted by the virtual surgical designs was assessed by comparing the humeral neck shaft angle and humeral head height measured at the virtual surgery and at day 1 after the real surgery. The humeral neck shaft angle, humeral head height, shoulder range of motion (abduction, external rotation and forward flexion), Constant shoulder function score and visual analogue score (VAS) were recorded at 1 day, 3 months and 12 months after the real surgery. The stability of the medial column was assessed at 1 day after the real surgery. The complications were recorded.Results:All patients were followed up for 12-38 months [(18.5±1.8)months]. The fracture showed bony union in all patients with the union time of 6.6-17.2 weeks [(10.2±1.0)weeks]. The humeral neck shaft angle and humeral head height showed no significant differences measured at the virtual surgery and at 1 day after the real surgery, and were also not significant different at 1 day, 3 months and 12 months after the real surgery (all P>0.05). At 3 months and 12 months after the real surgery, the shoulder abduction [(119.4±11.8)°, (155.3±13.7)°], external rotation [(37.6±6.3)°, (46.8±7.4)°], forward flexion [ (94.8±10.2)°, (126.9±1.6)°] and Constant function score [(66.8±8.4)points, (82.4±9.6)points] were all higher than those at 1 day after the real surgery [(53.8±4.5)°, (21.6±3.3)°, (44.6±7.8)°, (34.3±6.1)points], while the VAS [(4.1±0.5)points, (1.2±0.2)points] was lower than that at 1 day after the real surgery [(8.3±1.4)points] (all P<0.05). The medial column was stable in 34 patients and unstable in 2 at 1 day after the real surgery. Complications included screw cutting out in the articular surface in 1 patient and humeral head necrosis in 1. Conclusion:Treatment of complex proximal humeral fractures with open reduction and internal fixation assisted by computer virtual surgery is conducive to maintaining reduction effect, promoting shoulder joint function, relieving pain and reducing complications.
ABSTRACT
Orbital fracture often leads to facial collapse, diplopia, enophthalmos, and even blindness. Traditional surgery relies on the experiences of physicians to achieve fracture reduction and orbital wall reconstruction, but the repair effect is not satisfactory. In recent years, with the development of digital technology, technologies such as computer-assisted surgery, 3D printing, surgical navigation systems, and intraoperative CT imaging have become increasingly widespread in the field of orbital reconstruction. Such techniques can avoid dependence on physicians′ experiences and make it easy for estimating and positioning the implantation sites, which subsequently contributes to better surgery efficiency and precise reconstruction of the orbit, improving aesthetics and visual function of patients. To this end, the authors reviewed the recent progress in application of digital technology for orbital fracture reconstruction, so as to provide reference and theoretical basis for clinical practice.
ABSTRACT
Objective:To investigate the clinical efficacy of preoperative three-dimensional (3D) reconstruction planning in total hip arthroplasty for development dysplasia of the hip secondary to osteoarthritis.Methods:A total of 80 patients with osteoarthritis secondary to Crowe I-III developmental dysplasia of the hip who underwent primary unilateral total hip arthroplasty from October 2019 to March 2021 were retrospectively analyzed, including 18 males and 62 females and the mean age was 55.7±10.4 years (range 41-72 years). Forty patients in the 3D group, the prosthesis type and installation angle were planed on the 3D reconstruction software based on the full-length CT scan data of the lower limbs, and the length difference of the lower limbs and hip offset were calculated. Forty patients in the control group underwent preoperative planning using conventional film measurement, and lower limb length was judged based on the preoperative measurement data and intraoperative comparison of both lower limbs. The difference of postoperative leg length, hip offset, hip function score, operating time, intraoperative blood loss, and incidence of complications were compared between the two groups.Results:All 80 patients completed the surgery successfully and the follow-up time was up to 3 months after operation. The 3D group was better than the control group in operation time (70.9±7.7 min vs. 81.6±13.3 min, t=-4.91, P<0.001), the difference of postoperative lower limb length (2.78±1.31 cm vs. 5.35±2.15 cm, t=-5.74, P<0.001), and hip function score at 1 week after operation (75.67±3.35 vs. 67.35±4.21, t=12.33, P=0.002), with statistically significant differences. In the 3D group, 95% of acetabular prosthesis and 90% of femoral stem components were consistent with the planned model, while the rate were only 75% and 68% in the control group, and the difference was statistically significant (χ 2=7.51, P=0.023; χ 2=14.92, P=0.005). There were no intraoperative complications such as vascular and nerve injury, and no postoperative complications such as dislocation or periprosthetic infection in all 80 patients. Conclusion:3D preoperative planning assisted total hip arthroplasty in the treatment of Crowe I-III developmental dysplasia of the hip secondary to osteoarthritis can improve the accuracy of the operation, and has a good clinical effect on restoring the leg length and hip offset.
ABSTRACT
Objective:To explore the role of navigation-assisted valgus stress method in avoiding excessive correction of lower limb mechanical axis after high tibial osteotomy (HTO).Methods:A retrospective study was carried out on osteoarthritis (OA) patients who were treated with HTO for medial compartment pain of knee from January 2020 to March 2022 in the Department of Joint Surgery, Shanghai Changhai Hospital, the First Affiliated Hospital of Naval Medical University. According to the different ways of confirming alignment during operation, they were divided into computer navigation assisted valgus stress HTO group (referred to as navigation group) and traditional rod fluoroscopy HTO group (referred to as traditional group). There were 28 patients in the navigation group, 10 males and 18 females, with age of 54.4±9.1 years (range, 41-73 years) and body mass index of 26.1±3.3 kg/m 2 (range, 19.8-35.2 kg/m 2); There were 30 patients in the traditional group, 13 males and 17 females, aged 56.9±8.5 years (range, 40-70 years), with a body mass index of 25.7±4.0 kg/m 2 (range, 19.2-32.9 kg/m 2). Measuring the mechanical femoral tibial angle (mFTA), joint line convergence angle (JLCA), medial proximal tibial angle (MPTA), Lysholm score and Hospital for Special Surgery (HSS) score before operation and at the last follow-up of the two groups, and conduct statistical analysis. Results:Both groups were followed up. The follow-up time of navigation group and traditional group was 21.3±8.7 months and 22.5±7.6 months, respectively, with no significant difference ( t=0.53, P=0.596). There were significant differences between the two groups in the amount of mechanical axis correction (ΔmFTA) and the amount of bone correction (ΔMPTA) ( t=2.09, P=0.041; t=2.58, P=0.012), while there was no significant difference in ΔJLCA ( t=0.32, P=0.753). In the navigation group, there were 9 cases (32%) of undercorrection, 17 cases (61%) with acceptable alignment, and 2 cases (7%) with over correction, while in the traditional group, there were 5 cases (17%) with under correction, 13 cases (43%) with acceptable alignment, and 12 cases (40%) with over correction. There was significant difference in the distribution rate of alignment between the two groups ( P=0.012), and the rate of overcorrection in the navigation group was significantly lower than that in the control group (7% vs. 40%, P=0.005). The intra group correlation coefficient between the navigation correction mechanical axis and ΔmFTA was 0.787. There was no significant difference in Lysholm score and HSS score between the two groups before and after surgery (all P>0.05), and they were significantly improved after operation (all P<0.05). Conclusion:Navigation-assisted valgus stress method HTO is reliable, which can accurately achieve the target alignment, reduce the incidence of over correction, and obtain good clinical results.
ABSTRACT
Abstract Objective The primary aim of the present study was to evaluate the long-term outcomes including survivorship of computer navigated distal femoral lateral opening wedge osteotomy (DFLOWO). The secondary aim was to identify the potential factors that may influence its survivorship. Methods A retrospective analysis of prospectively collected data for patients with lateral compartment arthritis who underwent navigated DFLOWO from December 2006 to November 2012 was performed. The International Knee Documentation Committee (IKDC) and Knee Injury and Osteoarthritis Outcome Score (KOOS) scores were analyzed for outcome measures. Conversion to arthroplasty during the follow-up was the end point. Results A total of 19 DFLOWOs were performed in 17 patients with a mean age of 46.6 ± 6.5 years formed the study cohort. The coronal alignment was corrected from a mean of 7.1° (2-11°) valgus to a mean of 2.1° (0.5°-3°) varus. The IKDC scores improved from mean of 39 preoperatively to 53 at the mean long-term follow-up of 9.1 years. The mean KOOS scores at the long-term follow-up were pain 71, symptoms 56, activities of daily living 82, sports and recreation 59, quality of life 43. Survivorship of the DFLOWO was 78.9% at a follow-up of 9.1 years. Presence of ≥ grade 2 according to the International Cartilage Repair Society (ICRS) cartilage degeneration in the medial compartment of the knee and >7° preoperative valgus deformity were strongly correlated with conversion to total knee arthroplasty (TKA) at the long-term follow-up (r= 0.66). ConclusionsComputer navigated DFLOWO has satisfactory clinical outcomes and 79% survivorship in long-term follow-up. Presence of more than ICRS ≥ grade 2 degenerative changes in the medial compartment of knee with > 7° preoperative valgus deformity negatively affects the survivorship of DFLOWO in the long-term follow-up.
Resumo Objetivo O objetivo principal do presente estudo foi avaliar os resultados a longo prazo, incluindo a sobrevivência em Osteotomia Varizante Femoral Distal com Cunha de Abertura Lateral (OVFD-CAL) utilizando navegação computadorizada. O objetivo principal do presente estudo foi avaliar os resultados a longo prazo, incluindo a sobrevivência. Métodos Foi realizada uma análise retrospectiva dos dados coletados prospectivamente de pacientes com artrite do compartimento lateral submetidos a OVFD-CAL por navegação de dezembro de 2006 a novembro de 2012. As pontuações International Knee Documentation Committee (IKDC, na sigla em inglês) e Knee Injury and Osteoarthritis Outcome Score (KOOS, na sigla em inglês) foram analisadas para medição de resultados. Conversão para artroplastia durante o acompanhamento foi o ponto final. Resultados Um total de 19 OVFD-CAL foram realizados em 17 pacientes com média de idade de 46,6 ± 6,5 anos formaram a coorte do estudo. O alinhamento coronal foi corrigido a partir de uma média de 7,1° (2-11°) de valgo para uma média de 2,1° (0,5°-3°) de varo. As pontuações do IKDC melhoraram de uma média pré-operatória de 39 para 53 no acompanhamento de médio de longo prazo de 9,1 anos. Os escores do KOOS no acompanhamento a longo prazo foram: dor 71, sintomas 56, atividades da vida diária 82, esportes e recreação 59, qualidade de vida 43. A sobrevivência do OVFD-CAL foi de 78,9% em um acompanhamento de 9,1 anos. Presença de degeneração da cartilagem segundo a Sociedade Internacional de Reparação de Cartilagem (International Cartilage Repair Society [ICRS, na sigla em inglês])≥ grau 2 no compartimento medial do joelho e deformidade pré-operatória em valgo > 7° fortemente correlacionado com a conversão para artroplastia total do joelho (ATJ) no acompanhamento a longo prazo (r - 0,66). ConclusõesA OVFD-CAL por navegação computadorizada apresentou resultados clínicos satisfatórios e sobrevida de 79% no acompanhamento a longo prazo. Presença de alterações degenerativas ICRS ≥ grau 2 no compartimento medial do joelho com > 7° de deformidade pré-operatória em valgo afeta negativamente a sobrevivência da OVFD-CAL no acompanhamento de longo prazo.
Subject(s)
Humans , Male , Female , Osteoarthritis , Osteotomy , Outcome Assessment, Health Care , Arthroplasty, Replacement, Knee , Surgery, Computer-Assisted , Knee InjuriesABSTRACT
Objective:To analyze the clinical effect of navigation-assisted cosmetic incision for reduction and internal fixation in treating unilateral B-type zygomatic fracture.Methods:A retrospective cohort study was performed on clinical data of 35 patients with unilateral type B zygomatic fracture treated from January 2018 to December 2019 in First Affiliated Hospital of Fujian Medical University. There were 20 males and 15 females at age range of 5-62 years [(38.7±11.3)years]. Navigation-assisted cosmetic incision for reduction and internal fixation was performed for 17 patients (navigation group), and empirical incision to reduction and internal fixation was performed for 18 patients (convention group). The length of bony zygomatic process (zygomatic process) and width of zygomatic temporal point (frontal width) of the bilateral zygomatic bone were measured on the horizontal axis of CT at 1 week after operation. The absolute values of the difference of bony zygomatic process degree and frontal bony width between affected side and the healthy side were compared between the two groups. The patients′ satisfaction and occurrence of complications such as lower eyelid ectropion, incision infection and facial nerve injury were compared between the two groups at half a year after operation.Results:All patients were followed up for 6-24 months [(9.3±1.2)months]. The absolute difference of bony zygomatic process was 0.60(0.25, 0.85) mm in navigation group, and was 0.75 (0.20, 1.98)mm in convention group ( P>0.05). The absolute difference of frontal bony width was (0.37±0.11)mm in navigation group, and was (2.47±0.63)mm in convention group ( P<0.01). Satisfaction rates by both objective evaluation and subjective evaluation in navigation group were better than that in convention group at half a year after operation (both P<0.05). Navigation group showed lower eyelid ectropion in 1 patient and incision infection in 1 patient. Convention group showed facial nerve injury in 1 patient and incision infection in 2 patients. There was no significant difference in the incidence of complications between navigation group [12%(2/17)] and conventional group [17%(3/18)] ( P>0.05). Conclusion:For unilateral type B zygomatic fracture, navigation-assisted cosmetic incision for reduction and internal fixation can more accurately restore the frontal width, and improve satisfaction rate as compared with empirical reduction and internal fixation.
ABSTRACT
Objective:To compare the clinical efficacy of robot-assisted and simple arthroscopic reconstruction of anterior cruciate ligament (ACL).Methods:A retrospective cohort study was conducted to analyze the clinical data of 37 patients with ACL tear admitted to Honghui Hospital of Xi′an Jiaotong University from January 2020 to September 2020. There were 24 males and 13 females, aged 16-45 years[(30.7±9.8)years]. A total of 17 patients were treated by robot-assisted ACL reconstruction (robot-assisted group), and 20 patients by simple arthroscopic ACL reconstruction (simple arthroscopy group). The operation time, number of guide wire drilling, positional accuracy of bone tunnel (distance between the central point of bone tunnel and ideal anatomical point) and perioperative complications were compared between the two groups. Knee stability was evaluated by Lachman test and KT-2000 measurement, and knee function by Lysholm score, International Knee Documentation Committee (IKDC) score and range of motion of joint flexion and extension before operation, at 4 months after operation and at the last follow-up.Results:All patients were followed up for 12-18 months[(13.1±4.1)months]. The operation time in robot-assisted group was (83.8±11.3)minutes, significantly longer than (50.4±9.1)minutes in simple arthroscopy group ( P<0.01). The number of guide wire drilling in robot-assisted group was (2.2±0.5)times, less than (2.5±0.4)times in simple arthroscopy group ( P<0.05). The distance between the central point of bone tunnel and ideal anatomical point was (1.3±0.3)mm in robot-assisted group, not significantly different from (1.4±0.3)mm in simple arthroscopy group ( P>0.05). There were no perioperative complications in both groups. The two groups showed no significant differences in Lachman test, KT-2000 measurement, Lysholm score, IKDC score and range of motion of joint flexion and extension before operation, at 4 months after operation and at the last follow-up (all P>0.05). The above indices in both groups were significantly improved at 4 months after operation and at the last follow-up as compared with those before operation (all P<0.01), and both groups showed no significant difference in the above indexes at 4 months after operation and at the last follow-up as compared with those before operation (all P>0.05). Conclusion:Compared with simple arthroscopic ACL reconstruction, robot-assisted ACL reconstruction can prepare a bone tunnel once with good location and direction in one time and achieve similar results in stability and functional recovery of the joint except for slightly longer operation time.
ABSTRACT
Total knee arthroplasty (TKA) is an effective treatment for end-stage knee disease, with the postoperative alignment, component position, soft tissue balance, and prosthesis matching being key factors for the success of TKA. In order to achieve more accurate postoperative alignment and component position, better soft tissue balance and prosthesis matching for longer prosthesis longevity, better postoperative function and higher patient satisfaction, various intelligent accuracy technological aids such as computer assisted navigation (CAN), patient specific instrumentation (PSI), surgical robots, microsensors, customized implants (CI) and personalized 3D preoperative planning have emerged and are given high expectation. In this paper, the authors review the application and research progress of the above technological aids mainly from aspects of alignment, component position, clinical outcomes and cost analysis, so as to provide a reference for the application of related technological aids in TKA.
ABSTRACT
Objective:To compare the therapeutic results between axis pedicle screwing assisted by intraoperative 3-D navigation and freehand axis pedicle screwing in the treatment of Hangman fracture.Methods:A retrospective analysis was performed of the 64 patients with Hangman fracture who had received posterior axis pedicle screwing at Department of Spinal Surgery, The Sixth Hospital of Ningbo from May 2014 to December 2019. According to the placement methods of axis pedicle screws, they were divided into a navigation group ( n=34, subjected to axis pedicle screwing assisted by intraoperative 3-D navigation) and a freehand group ( n=30, subjected to freehand axis pedicle screwing). Pedicle screw placement time, operation time, intraoperative bleeding, fluoroscopy time, hospital stay, total hospitalization cost and complications were recorded and compared between the 2 groups. The accuracy of axis pedicle screw placement was evaluated according to the postoperative cervical CT and screw grading criteria proposed by Park et al. At admission, 3 months postoperation, and the last follow-up, neurological function of the patients was evaluated by modified Japanese Orthopedic Association (mJOA) score, neck pain was evaluated by visual analogue scale (VAS), and C2/3 vertebral body angulation and C2 forward displacement were measured. The clinical efficacy was evaluated by Moon grading at the last follow-up. Results:The navigation group and the freehand group were comparable due to insignificant differences between them in the preoperative general data ( P>0.05). The accuracy of screw placement in the navigation group (98.2%, 54/55) was significantly higher than that in the freehand group (85.2%, 46/54) ( P<0.05). The screw placement time, operation time, fluoroscopy time and total hospitalization cost in the navigation group were significantly more than those in the freehand group ( P<0.05). Vertebral artery injury occurred in 3 cases in the freehand group. Screw loosening, screw breakage or rod breakage occurred in none of the patients after operation. There was no significant difference between the 2 groups in the intraoperative bleeding, hospital stay or follow-up time ( P>0.05). In both groups, the VAS score, mJOA score, C2/3 vertebral body angulation and C2 forward displacement were significantly improved at 3 months postoperation and the last follow-up compared with those at admission ( P<0.05), but there was no significant difference between the 2 groups in the contemporary comparisons ( P>0.05). At the last follow-up, Moon grading in the navigation group was significantly better than that in the freehand group ( P<0.05). Conclusion:In the treatment of Hangman fracture, compared with freehand screw placement, axis pedicle screwing assisted by intraoperative 3-D navigation can improve accuracy and safety of screw placement and reduce postoperative complications, leading to better clinical efficacy.
ABSTRACT
Objective:To evaluate the feasibility and clinical outcomes of navigation-assisted total knee arthroplasty (TKA) using adjusted restricted kinematic alignment (arKA).Methods:Data of 14 consecutive cases of OrthoPilot navigation-assisted TKA using arKA from October 2019 to September 2021 were retrospectively analyzed, including 3 males and 9 females. The average age was 67.71±8.96 years with mean body mass index (BMI) 25.94±3.12 kg/m 2. 27 consecutive patients who underwent navigation-assisted TKA using aMA during the same period were assessed as the control group. There were no significant differences in gender, age or BMI between the two groups. Intraoperative parameters including operative duration, tibia resection angle, frontal femoral angle, axial femoral angle, joint line translation, medial and lateral gap in extension and flexion position were recorded. Radiographic parameters including hip-knee-ankle (HKA) angle, coronal femoral component angle (cFCA), coronal tibial component angle (cTCA), sagittal femoral component angle (sFCA) and sagittal tibial component angle (sTCA) were measured. Functional outcomes were assessed by Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and Hospital for Special Surgery (HSS) score. Surgery-related complications were recorded. Results:All cases were followed up. The mean follow-up of arKA group was 18.57±6.98 months and follow-up of aMA group was 22.15±4.91 months. The intraoperative tibial resection was 3.07°±1.00° in arKA group versus 0.67°±0.56° in aMA group ( P<0.05). The lateral cutting height of tibia was 9.07±1.82 mm in arKA group versus 6.89±2.94 mm in aMA group ( P<0.05). The lateral gap in flexion was 1.71±0.83 mm in arKA group versus 1.04±0.71 mm in aMA group ( P<0.05). The difference of medial-lateral flexion laxity was 1.14±0.86 mm in arKA group versus 0.41±0.75 mm in aMA group ( P<0.05). The postoperative HKA angle was 174.10°±1.63° in arKA group versus 177.12°±2.07° in aMA group ( P<0.05). The cTCA was 87.58°±0.85° in arKA group versus 89.14°±1.23° in aMA group ( P<0.05). The cFCA was 93.10°±1.75° in arKA group versus 90.41°±3.01° in aMA group ( P<0.05). There was no statistical difference between the two groups in sFCA (1.30°±0.82° vs. 1.56°±1.19°), sTCA (87.16°±0.95° vs. 87.79°±1.04°) and femoral notching (7.1% vs. 11.1%). The preoperative HSS score in arKA group was 46.07±4.68 and HSS score at 1 month postoperatively was 73.86±3.48 ( P<0.05). The preoperative HSS score in aMA group was 47.04±4.52 and HSS score at 1 month postoperatively was 74.04±3.57 ( P<0.05). There was no statistical difference between the two groups in WOMAC score (12.93±2.37 vs. 12.63±2.34) and HSS score (86.86±2.74 vs. 86.11±2.95) at 6 months postoperatively. 2 cases (14.3%) in arKA group and 5 cases (18.5%) in aMA group had deep venous thrombosis (χ 2=0.12, P=0.733). Conclusion:Navigation-assisted TKA using arKA offers the surgeons a new alignment option for severe knee deformity with satisfactory clinical outcomes, the arKA technique has advantages in soft tissue protection and gap balance regulation compared to aMA technique.
ABSTRACT
Objective:To investigate the early clinical effects of orthopedic surgery robot-assisted double Endobutton titanium plate internal fixation in the treatment of fresh acromioclavicular joint dislocation.Methods:Thirty-nine patients with fresh acromioclavicular joint dislocation were included from January 2020 to January 2022. A total of 19 patients were treated with double Endobutton suspension internal fixation assisted by the domestic third-generation orthopaedic surgical robot (TiRobot ? 2.0) Dimensity system. There were Rockwood type III in 11 cases, type IV in 8 cases. Twenty cases were treated with conventional incision double Endobutton internal fixation, with Rockwood type III in 13 cases, type V in 7 cases. The operation duration, blood loss volume, incision length and hospitalization time were compared between the two groups. The following CT parameters of acromioclavicular joint at 2 days and 1 year after operation, distance between distal inferior cortex of clavicle and subacromial cortex, distance between upper and lower endobuttons, horizontal distance between anterior edge of distal clavicle and anterior edge of acromion and diameter of coracoid process and diameter of clavicular tunnel were measured. The visual analogue score (VAS), Constant-Murley shoulder function score and shoulder abduction activity were also evaluated before and at 12 months after operation. Results:The follow-up duration was 10.8±2.4 months in the robot group and 11.5±3.1 months in the routine group. The VAS score of the robot group decreased from 5.3±2.1 to 0.3±0.2 at 12 months after operation ( t=10.46, P=0.014). The Constant-Murley score increased from 55.6±6.4 to 92.0±4.2. The range of shoulder abduction increased from 42.2°±5.4° to 172.6°±6.1° ( t=17.24, P<0.001). The operation duation of the robot group was 74.4±6.6 min, which was longer than that of the conventional group 61.7±7.2 min ( t=5.43, P=0.037). There was no significant difference in VAS score, Constant-Murley score, shoulder abduction activity or CT measurement between the two groups ( P>0.05). During the follow-up, two cases in the robot group had cortical osteolysis on the supraclavicular surface, one case in the conventional group had loss of reduction, one case in the supraclavicular cortical osteolysis, and 4 cases in the cortical defect on the side of the coracoid process tunnel. Conclusion:Orthopedic robot-assisted and conventional incision with double Endobutton titanium plate internal fixation in treating fresh acromioclavicular joint dislocation can achieve satisfied early clinical effects. Accurate establishment of clavicle and coracoid bone tunnel assisted by robot can overcome the defects of bone tunnel deviation in conventional incision operation and can prevent reduction and bone loss. However, robot-assisted and conventional incision Endobutton internal fixation could enlarge bone tunnel.
ABSTRACT
OBJECTIVE@#To investigate the accuracy and safety of pedicle screw placement assisted by orthopedic robot and C-arm fluoroscopy.@*METHODS@#The clinical data of 36 patients with spinal diseases underwent surgical treatment from January 2019 to August 2020 was retrospectively analyzed. Among them, 18 cases were implanted pedicle screws assisted by orthopaedic robot(observation group), including 12 males and 6 females, aged from 16 to 61 years with an average of (38.44±3.60) years;there were 1 case of adolescent scoliosis, 1 case of spinal tuberculosis, 7 cases of lumbar spondylolisthesis, 4 cases of thoracic fracture and 5 cases of lumbar fracture. Another 18 cases were implanted pedicle screws assisted by C-arm fluoroscopy(control group), including 10 males and 8 females, aged from 18 to 58 years with an average of (43.22±2.53) years;there were 1 case of adolescent scoliosis, 6 cases of lumbar spondylolisthesis, 6 cases of thoracic fracture and 5 cases of lumbar fracture. The intraoperative fluoroscopy times, nail placement time and postoperative complications were recorded in two groups. CT scan was performed after operation. The Gertzbein-Robbins standard was used to evaluate the accuracy of pedicle screw placement which was calculated.@*RESULTS@#The number of intraoperative fluoroscopy in observation group was(6.89±0.20) times, which was significantly higher than that in control group(14.00±0.18)times(P<0.05). The placement time of each screw in observation group was(2.56±0.12) min, which was significantly different from that in control group(4.22±0.17) min (P<0.05). One case of incision infection occurred in control group after operation, and recovered after active dressing change. During the follow-up period, no serious complications such as screw loosening and fracture occurred in two groups, and there was no significant difference in complications between two groups(P>0.05). A total of 107 screws were placed in observation group, including 101 screws in class A, 4 in class B, 2 in class C, 0 in class D and 0 in class E, the accuracy rate of pedicle screw placement=[(number of screws in class A+B) / the number of all screws placed in the group] ×100%=98.1%(105/107); and a total of 104 screws were placed in control group, including 90 screws in class A, 4 in class B, 5 in class C, 5 in class D and 0 in class E, the accuracy rate of pedicle screw implantation=[(number of screws in class A+B/the number of all screws placed in the group]×100%=90.3% (94/104); there was significant difference between two groups (P<0.05).@*CONCLUSION@#Orthopaedic robot assisted pedicle screw placement has the advantages of less fluoroscopy times, shorter screw placement time and higher accuracy, which can further improve the surgical safety and has a broad application prospect in the orthopaedic.
Subject(s)
Adolescent , Adult , Female , Humans , Male , Middle Aged , Young Adult , Fluoroscopy/methods , Lumbar Vertebrae/surgery , Pedicle Screws , Retrospective Studies , Robotic Surgical Procedures/methods , Robotics , Scoliosis , Spinal Fusion/methods , Surgery, Computer-AssistedABSTRACT
OBJECTIVE@#To investigate the efficacy of single oblique lumbar interbody fusion(OLIF) with robot-assisted posterior internal fixation for the treatment of lumbar degenerative diseases.@*METHODS@#The clinical data of 67 patients with lumbar degenerative diseases treated from September 2019 to December 2020 was retrospectively analyzed. According to different surgical methods, the patients were divided into traditional group and robot group. The traditional group received traditional OLIF with posterior fluoroscopy percutaneous nail fixation, and the robot group received OLIF with robot-assisted posterior internal fixation. There were 33 patients in traditional group, including 13 males and 20 females, aged from 44 to 82 years old with an average of (59.7±9.1) years; and 34 cases in robot group, including 7 males and 27 females, aged from 45 to 81 years old with an average of(61.6±8.8) years. The operation time, fluoroscopy time, intraoperative blood loss, postoperative out of bed time and hospital stay were recorded. The visual analogue scale (VAS) of low back pain and Oswestry Disability Index(ODI) were compared before operation and 3 days, 3 months after operation between two groups. The accuracy of nail placement was evaluated by postoperative CT scan.@*RESULTS@#Both groups of patients successfully completed the operation and were followed up for more than 3 months. The operation time, fluoroscopy time, intraoperative blood loss, postoperative out of bed time and hospital stay in traditional group were(299.85±15.79) min, (62.58±10.83) min, (118.33±10.80) ml, (2.5±0.7) d, (9.67±2.13) d;and robot group was(248.53±14.22) min, (19.47±3.51) min, (115.74±9.86) ml, (2.3±0.6) d, (9.44±1.93) d, respectively. The symptoms of postoperative low back pain, lower limb pain and numbness were significantly improved in all patients. The operation time and fluoroscopy time in robot group were significantly less than those of traditional group. There was no significant difference in intraoperative blood loss, postoperative out of bed time, hospital stay, VAS and ODI before and after operation (P>0.05). The accuracy of nail placement in robot group was 98.8% (2/160), which was higher than 89.9% (16/158) in traditional group.@*CONCLUSION@#Treatment of lumbar degenerative diseases with single body position OLIF with robot-assisted posterior minimally invasive internal fixation has less operation time and fluoroscopy time, high nail placement accuracy and accurate surgical effect, which is worthy to be popularized in clinic.
Subject(s)
Adult , Aged , Aged, 80 and over , Female , Humans , Male , Middle Aged , Lumbar Vertebrae/surgery , Lumbosacral Region , Retrospective Studies , Robotics , Spinal Fusion/methods , Treatment OutcomeABSTRACT
Maxillary sinus pneumatisation pose a grave clinical challenge for implant fixed rehabilitation in posterior maxilla owing to diminished bone volume. This necessitates sinus lift and grafting which increase the duration and cost and possible surgical complications. Pterygoid implant has a greater short term osseointegration and is a proven treatment method for rehabilitation of highly resorbed posterior maxilla. To overcome the limitations of sinus grafting techniques, the current case report describes the use of flapless, tilted and pterygoid implant for restoration of partially edentulous atrophic maxilla eliminating grafting (AU).
A pneumatização do seio maxilar representa um grande desafio clínico para a reabilitação fixa por implante na região posterior da maxila devido ao volume ósseo diminuído. Isso requer elevação do seio e enxerto, fatores que aumentam a duração, o custo e as possíveis complicações cirúrgicas. O implante pterigóide tem uma osseointegração maior em curto prazo e é um método de tratamento comprovado para reabilitação de maxila posterior altamente reabsorvida. Para superar as limitações das técnicas de enxerto de seio, o relato de caso atual descreve o uso de implante sem retalho, inclinado e pterigóide para restauração de maxila atrófica parcialmente edêntula eliminando o enxerto.(AU)