ABSTRACT
This study aims to optimize the parameters for stir-frying of Kansui Radix with vinegar based on the conversion of representative toxic diterpenes, which is expected to serve as a reference for the standardized production of Kansui Radix stir-fried with vinegar. To be specific, the toxic components [3-O-(2'E,4'Z-decadienoyl)-20-O-acetylingenol(3-O-EZ), kansuiphorin C(KPC)] in Kansui Radix and the products(ingenol, 20-deoxyingenol) after the stir-frying with vinegar were selected. The toxicity to intestine and water-draining activity were evaluated with NCM460(normal human colon mucosal epithelial cell line) and HT-29(a human colorectal adenocarcinoma cell line). An HPLC method was then developed to assess the conversion of toxic components. On this basis, temperature, time, and amount of vinegar for the processing of Kansui Radix were optimized with the Box-Behnken design and the content of ingenol and 20-deoxyingenol as evaluation index. The results showed that after the stir-frying of Kansui Radix with vinegar, 3-O-EZ and KPC were first converted to monoester 3-O-(2'E,4'Z-decadienoyl)ingenol(3-EZ) and 5-O-benzoyl-20-deoxyingenol(5-O-Ben) and finally to almost non-toxic ingenol and 20-deoxyingenol, respectively. Meanwhile, the water-draining activity was retained. Six compounds had a good linear relationship with the peak area in the corresponding concentration ranges(R~2≥0.999 8), and the average recovery fell in the range of 98.20%-102.3%(RSD≤2.4%). The content of representative diterpenes and intermediate products was 14.78%-24.67% lower in the Kansui Radix stir-fried with vinegar than in the Kansui Radix, while the content of the conversed products was 14.37%-71.37% higher. Among the process parameters, temperature had significant influence on the total content of products, followed by time. The optimal parameters were 210 ℃, 15 min, and 30% vinegar. The relative error between the experimental results and the predicted values was 1.68%, indicating that the process was stable and reproducible. The strategy of screening optimal parameters for stir-frying of Kansui Radix with vinegar based on the transformation of toxic components can help improve the production stability, reduce the toxicity, and ensure the efficacy of Kansui Radix stir-fried with vinegar, which can serve as a reference for the process optimization of similar toxic Chinese medicinals.
Subject(s)
Humans , Acetic Acid , Euphorbia , HT29 CellsABSTRACT
Curcumae Radix is not only a kind of traditional Chinese medicine (TCM), but also a common natural dyestuff. It has the effects of activating blood, relieving pain, moving qi for relieving depression, clearing heart and cooling blood, and curing jaundice. The commonly used processing methods are cutting, stir frying, stir-frying with vinegar, and stir-frying with wine. As the basis of TCM clinical treatment, the correct selection and the quality of the processed products are directly related to the safety and effectiveness of the clinical medication of TCM. On the basis of a comprehensive consulting, sorting and analyzing of the ancient and modern medical literatures, this paper summarizes the historic successive changes and current status in studies on quality evaluation methods of Curcumae Radix, which provides the necessary reference and scientific basis for the standardization of Curcumae Radix.
ABSTRACT
Objective To optimize the processing technology of stir-frying with vinegar of Curcuma Longa Radix (CLR) by orthogonal design and Box-Behnken design-respanse surface method (BBD-RSM) based on entropy method. Methods As comprehensive evaluation indexes, the contents of curcumin, demethoxycurcumin, and bisdemethoxycurcumin in CLR processed by traditional method were determined by HPLC. The orthogonal test was adapted to examine the influence of the amount of vinegar, the moistening time, parching time, and parching temperature on processing technology of stir-frying with vinegar. Based on the results above, BBD-RSM was adopted to optimize the processing technology further using the moistening time, parching time and parching temperature as factors. Results The optimum processing technology of the orthogonal test was covered the amount of vinegar of 15%, moistening time of 10 min, parching temperature of 130 ℃, and parching time of 10 min. The optimum processing technology by BBD-RSM was covered moistening time of 12 min, parching temperature of 150 ℃, and parching time of 8 min. The verification esting indicates that the process conditions are reasonable and feasible with good reproducibility. Conclusion The method and data are precise and reliable. Besides, it established the processing technology of vinegar CLR and provided a theoretical basis for the processing technology of stir-frying with vinegar of CLR.
ABSTRACT
AIM To investigate the effects of frost-like powder,steaming,stir-frying with wine,stir-frying with salt-water and stir-frying with vinegar on compositions and contents of fatty oils in Descurainiae Semen.METHODS Descurainiae Semen was processed by five methods,respectively.The fatty oils were extracted from various processed products by petroleum ether,which were then derivatized.GC-MS was adopted in the qualitative identification and quantitative determination.RESULTS Except for frost-like powder,various processing methods could increase the extraction rate of fatty oils.Compared with raw product,the quantities of fatty oils in various processed products were decreased,together with the increased contents.The main compositions of obtained fatty oils were unsaturated fatty acids,whose contents in various processed products (except stir-frying with vinegar product) were higher than those in the raw product.CONCLUSION The effects of different processing methods on compositions and contents of fatty oils in Descurainiae Semen show obvious differences,among which the processing effect of stir-frying with vinegar is not satisfactory.
ABSTRACT
AIM: To optimize the processing of Radix Paeoniae Alba stir-frying with vinegar. METHODS: UV-spectrophotometry was applied to determine the total paeoniflorin content, which was extracted by water from processed Radix Paeoniae Alba(stri-frying with vinegar) and the processing was designed by orhtogonal design. RESULTS: The best sample was treated at 130~?C for 40 min by adding 20% vinegar. METHODS: Processing of Radix Paeoniae Alba(stir-frying with vinegar) has a practical applicability.