Multipotent mesenchymal stromal/stem cell-based therapies for acute respiratory distress syndrome: current progress, challenges, and future frontiers

Acute respiratory distress syndrome (ARDS) is a critical, life-threatening condition marked by severe inflammation and impaired lung function. Mesenchymal stromal/stem cells (MSCs) present a promising therapeutic avenue due to their immunomodulatory, anti-inflammatory, and regenerative capabilities. This review comprehensively evaluates MSC-based strategies for ARDS treatment, including direct administration, tissue engineering, extracellular vesicles (EVs), nanoparticles, natural products, artificial intelligence (AI), gene modification, and MSC preconditioning. Direct MSC administration has demonstrated therapeutic potential but necessitates optimization to overcome challenges related to effective cell delivery, homing, and integration into damaged lung tissue. Tissue engineering methods, such as 3D-printed scaffolds and MSC sheets, enhance MSC survival and functionality within lung tissue. EVs and MSC-derived nanoparticles offer scalable and safer alternatives to cell-based therapies. Likewise, natural products and bioactive compounds derived from plants can augment MSC function and resilience, offering complementary strategies to enhance therapeutic outcomes. In addition, AI technologies could aid in optimizing MSC delivery and dosing, and gene editing tools like CRISPR/Cas9 allow precise modification of MSCs to enhance their therapeutic properties and target specific ARDS mechanisms. Preconditioning MSCs with hypoxia, growth factors, or pharmacological agents further enhances their therapeutic potential. While MSC therapies hold significant promise for ARDS, extensive research and clinical trials are essential to determine optimal protocols and ensure long-term safety and effectiveness.

In vitro construction of cartilage organoids based on extracellular matrix microcarriers of cartilage / 中华创伤杂志

Objective:To study the in vitro construction of functional and self-renewing cartilage organoids based on cartilage acellular extracellular matrix (ECM) microcarriers.Methods:Fresh porcine articular cartilage was taken. The merely crushed cartilage particles were set as natural cartilage group and ECM microcarriers of appropriate particle size, which were prepared by the acellular method of combining physical centrifugation and chemical extraction, were set as microcarrier group. Cartilage organoids were constructed by loading human umbilical cord mesenchymal stem cells (hUCMSCs) and human chondrocytes (hCho) with a ratio of 3∶1 with microcarriers through a rotating bioreactor. The organoids with different induction times were divided into 0-, 7-, 14-, and 21-day induction groups. The cell residues of the microcarrier group and natural cartilage group were evaluated by 4′, 6-diaminidine 2-phenylindole (DAPI) fluorescence staining and DNA quantitative analysis. The retention of microcarrier components was observed by Safranin O and toluidine blue stainnings, and the collagen and glycosaminoglycan (GAGs) levels in the microcarrier group and the natural cartilage group were determined by colorimetric method and dimethyl-methylene blue (DMMB) method. The microcarriers were further characterized by scanning electron microscopy and energy dispersive spectroscopy. The hUCMSCs cultured with Dulbecco′s Modified Eagle′s Medium (DMEM) supplemented with fetal bovine serum (FBS) in a volume fraction of 10% was used as the control group and the hUCMSCs cultured with the microcarrier extract was used as the experimental group. Subgroups of hUCMSCs cultured at 3 time points: 1, 3 and 5 days were set up in the two groups separately. Cell Counting Kit 8 (CCK-8) was used to detect the biocompatibility of the two groups. The cellular activity of the organoids of the 0-, 7-, 14-, and 21-day induction groups was detected by live/dead staining and the self-renewal ability of the cartilage organoids of the 14-day induced group was identified by Ki67 fluorescence staining. The organoids of the 7-, 14-, and 21-day induction groups were detected by RT-PCR in terms of the expression levels of chondrogenesis-related marker aggrecan (ACAN), type II collagen (COL2A1), SRY-related high mobility group-box gene-9 (SOX9), cartilage hypertrophy-and mineralization-related marker type I collagen (COL1A1), Runt-related transcription factor-2 (RUNX2), and osteocalcin (OCN). Colorimetric and DMMB assays were performed to determine the ability of organoids in the 0-, 7-, 14-, and 21-day induction groups to secrete collagen and GAGs.Results:The results of DAPI fluorescent staining showed that the natural cartilage group had a large number of nuclei while the microcarrier group hardly had any nuclei. The DNA content of the microcarrier group was (7.8±1.8)ng/mg, which was significantly lower than that of the natural cartilage group [(526.7±14.7)ng/mg] ( P<0.01). Saffranin O and toluidine blue staining showed that the microcarrier was dark- and uniform-colored and it kept a lot of cartilage ECM components. The collagen and GAGs contents of the microcarrier group were (252.9±1.4)μg/mg and (173.4±0.8)μg/mg, which were significantly lower than those of the natural cartilage group [(311.9±2.2)μg/mg and (241.3±0.7)μg/mg] ( P<0.01). Scanning electron microscopy showed that the surface of the microcarriers had uneven and interleaved collagen fiber network. The results of energy spectrum analysis showed that elements C, O and N were evenly distributed in the microcarriers, indicating that the composition of the microcarrier was uniform. The microcarrier had good biocompatibility and there was no statistical significance in the results of CCK-8 test between the control group and the experimental group after 1 and 3 days of culture ( P>0.05). After 5 days of culture, the A value of the experimental group was 0.53±0.02, which was better than that of the control group (0.44±0.03) ( P<0.05). In the 0-, 7-, 14-, and 21-day induction groups, hUCMSCs and hCho were attached to the surface of the microcarriers, with good cellular activity, and the live/death rates were (70.6±1.1)%, (80.5±0.6)%, (94.5±0.9)%, and (90.8±0.5)% respectively ( P<0.01). There were a large number of Ki67 positive cells in cartilage organoids. RT-PCR showed that the expression levels of ACAN, COL2A1, SOX9, COL1A1, RUNX2 and OCN were 1.00±0.09, 1.00±0.24, 1.00±0.18, 1.00±0.03, 1.00±0.06 and 1.00±0.13 respectively in the 7-day induction group; 4.16±0.28, 5.09±1.25, 5.65±1.05, 0.47±0.01, 1.68±0.02 and 0.21±0.06 respectively in the 14-day induction group; 13.42±0.92, 3.07±0.21, 1.84±1.08, 2.72±0.17, 2.91±0.18 and 3.32±1.20 respectively in the 21-day induction group. Compared with the 7-day induction group, the expression levels of ACAN, COL2A1, SOX9 and RUNX2 in the 14-day group were increased ( P<0.05), but COL1A1 expression level was decreased ( P<0.05), with no significant difference in OCN expression level ( P>0.05). Compared with the 7-day induction group, the expression levels of ACAN, COL1A1 and RUNX2 in the 21-day induction group were significantly increased ( P<0.01), with no significant differences in the expression levels of COL2A1, SOX9 and OCN ( P>0.05). Compared with the 14-day induction group, the expression levels of ACAN, COL1A1, RUNX2 and OCN in the 21-day group were increased ( P<0.05 or 0.01), with no significant difference in the expression level of COL2A1 ( P>0.05), but the expression level of SOX9 was decreased ( P<0.05). The contents of collagen in 0-, 7-, 14-and 21-day induction groups were (219.15±0.48)μg/mg, (264.07±1.58)μg/mg, (270.83±0.84)μg/mg and (280.01±0.48)μg/mg respectively. The GAGs contents were (171.18±1.09)μg/mg, (184.06±1.37)μg/mg, (241.08±0.84)μg/mg and (201.14±0.17)μg/mg respectively. Compared with the 0-day induction group, the contents of collagen and GAGs in 7-, 14-, and 21-day induction groups were significantly increased ( P<0.01), among which the content of collagen was the lowest in 7-day induction group ( P<0.01) but the highest in the 21-day induced group ( P<0.01); the content of GAGs was the lowest in the 7-day induced group ( P<0.01) but the highest in the 14-day induction group ( P<0.01). Conclusions:The microcarriers prepared by combining physical and chemical methods are decellularized successfully, with more matrix retention, uniform composition and on cytotoxicity. By loading microcarriers with hUCMSCs and hCho, cartilage organoids are successfully constructed in vitro, which are characterized by good cell activity, self-renewal ability, strong expression of genes related to chondrogenesis and secretion of collagen and GAGs. The cartilage organoids constructed at 14 days of induction have the best chondrogenic activity.

Self-assembled Cross-linking Based Hydrogels for Skin Injury Applications / 生物化学与生物物理进展

When skin injuries are healing, complex wound environments can be easily created, which can result in wound infection, excessive inflammation caused by neutrophil accumulation and inflammatory factors, and excessive reactive oxygen species, resulting in high levels of oxidative stress. As a result of these factors, cell membranes, proteins, DNA, etc. may become damaged, which adversely affects the repair function of normal cells around the wound, resulting in the formation of chronic wounds. The effectiveness of wound dressings as a treatment is well known. They can offer temporary skin damage protection, prevent or control wound infection, create an environment that is conducive to mending skin damage, and speed wound healing. Traditional dressings like gauze, cotton balls, and bandages, however, have the drawbacks of having no antimicrobial properties, having weak adhesive properties, having poor mechanical properties, being susceptible to inflammation, obstructing angiogenesis, needing frequent replacement, and being unable to create an environment that is conducive to wound healing. As an innovative bandage, self-assembled hydrogel has great water absorption, high water retention, superior biocompatibility, biodegradability and three-dimensional (3D) structure. With properties including hemostasis, antibacterial, anti-inflammatory, and antioxidant, the synthesized raw material itself and the loaded active compounds have a wide range of potential applications in the treatment of skin injuries and wound healing. This research begins by examining and discussing the mechanism of cross-linking in self-assembled hydrogels. The cross-linking modes include non-covalent consisting of physical interaction forces such as electrostatic interactions, π-stacking, van der Waals forces, hydrophobic interactions, and metal-ligand bonds, covalent cross-linking formed by dynamic covalent bonding such as disulfide bonding and Schiff bases. And hybrid cross-linking with mixed physical forces and dynamic covalent bonding. The next part describes the special structure and excellent functions of self-assembled hydrogels, which include an extracellular matrix-like structure, the removal of exogenous microorganisms, and the mitigation of inflammation and oxidative stress. It goes on to explain the benefits of using self-assembled hydrogels as dressings for skin injuries. These dressings are capable of controlling cell proliferation, loading active ingredients, achieving hemostasis and coagulation, hastening wound healing, and controlling the regeneration of the injured area. The development of self-assembly hydrogels as dressings is summarized in the last section. The transition from purely non-covalent or covalent cross-linking to hybrid cross-linking with multiple networks, from one-strategy action to multi-strategy synergy in exerting antimicrobial, anti-inflammatory, and antioxidant effects and from single-function to multi-functioning in a single product. Additionally, it is predicted that future developments in self-assembled hydrogels will focus on creating biomimetic gels with multi-strategy associations linkage from naturally self-assembling biomolecules peptides, lipids, proteins and polysaccharides; improving the properties and cross-linking of raw materials to enhance the storage capabilities of hydrogels and cross-linking techniques, realizing the recycling of hydrogels; conducting additional research and exploration into the cross-linking process of hydrogels; and realizing the gel’s controllable rate of degradation. Furthermore, combining 3D printing and 3D microscopic imaging technology to design and build one-to-one specialized gel dressings; using computer simulation and virtual reality to eliminate the time factor, resulting in self-assembled hydrogels that perfectly fit the ideal dressing.

Construction of porous structure on the surface of PLLA/β-tricalcium scaffold and its effect on cell adhesion / 西安交通大学学报(医学版)

【Objective】 To construct a 3D printed PLLA/β-tricalcium (PLLA/β-TCP) bone tissue engineering scaffold surface porous structure through simple treatment with NaOH solution, increase the roughness and hydrophilicity of the scaffold, and promote cell adhesion on the scaffold surface. 【Methods】 The PLLA/β-TCP mesh scaffold was prepared by 3D printing melt deposition molding technology, and the scaffold was roughed by NaOH etching. The effects of NaOH concentration and time on the scaffold were observed according to the microstructure, energy spectrum, contact angle, mechanics, and cell adhesion of the scaffold. 【Results】 The PLLA/β-TCP composite scaffold constructed by melt deposition technology had a pre-set porous structure, and the pores were interconnected. After NaOH etching, a porous structure with both macroscopic and microscopic pores was formed. The increase in any of the NaOH concentration and time parameters would lead to the increase of pore diameter and surface roughness. When the NaOH treatment parameter was 0.1 mol/L (9 h), it could significantly reduce the water contact angle on the surface of the scaffold, and had no significant effect on the compressive strength of the scaffold. In vitro cell testing showed that the surface porous composite scaffold etched with NaOH had more advantages in the adhesion and proliferation of BMSCs. 【Conclusion】 Using NaOH to process 3D printing of PLLA/β-TCP bone tissue engineering scaffolds can effectively improve the surface morphology of the scaffold, and optimize its hydrophilicity and cell adhesion.

Improving the surface hydrophilicity and performance of 3D printed PCL/β-TCP mesh support by sodium hydroxide alkali etching method / 西安交通大学学报(医学版)

【Objective】 To solve the problem of insufficient hydrophilicity on the surface of polycaprolactone (PCL)/β-TCP bone tissue engineering scaffolds, NaOH etching method was used to improve the surface microstructure of 3D printed PCL/β-TCP scaffolds, further affecting their hydrophilicity and cell response. 【Methods】 PCL/β-TCP mesh scaffolds were prepared using 3D printing melt deposition molding technology, and the surface roughness of the scaffolds was modified by NaOH etching. The effects of two reaction parameters, NaOH concentration and time, on the microstructure, spectral elements, contact angle, compressive strength, and cell adhesion of the scaffolds before and after modification were observed. 【Results】 After NaOH etching, the surface microporous structure of the mesh scaffold was successfully prepared. With the increase of either NaOH concentration or time, the surface micropores of the scaffold increased while the contact angle of the material surface decreased. However, the compression strength of the etched scaffold treated with NaOH for 1 mol/L (24 h) or 10 mol/L (6 h) was not statistically significant compared to the untreated group (P>0.05). The number of cells on the etched scaffold increased, with a larger spreading area of individual cells, making it more advantageous in the adhesion and proliferation of BMSCs. 【Conclusion】 The use of NaOH etching to improve the hydrophilicity of 3D printed PCL/β-TCP bone tissue engineering scaffolds is a low-cost and effective strategy which can effectively improve the wettability and cell adhesion of the scaffolds.

Research progress on graphene and its derivatives modulating the bone regeneration microenvironment / 口腔疾病防治

@#Graphene family nanomaterials (GFNs) are highly popular in the field of bone tissue engineering because of their excellent mechanical properties, biocompatibility, and ability to promote the osteogenic differentiation of stem cells. GFNs play a multifaceted role in promoting the bone regeneration microenvironment. First, GFNs activate the adhesion kinase/extracellularly regulated protein kinase (FAK/ERK) signaling pathway through their own micromorphology and promote the expression of osteogenesis-related genes. Second, GFNs adapt to the mechanical strength of bone tissue, which helps to maintain osseointegration; by adjusting the stiffness of the extracellular matrix, they transmit the mechanical signals of the matrix to the intracellular space with the help of focal adhesions (FAs), thus creating a favorable physiochemical microenvironment. Moreover, they regulate the immune microenvironment at the site of bone defects, thus directing the polarization of macrophages to the M2 type and influencing the secretion of relevant cytokines. GFNs also act as slow-release carriers of bioactive molecules with both angiogenic and antibacterial abilities, thus accelerating the repair process of bone defects. Multiple types of GFNs regulate the bone regeneration microenvironment, including scaffold materials, hydrogels, biofilms, and implantable coatings. Although GFNs have attracted much attention in the field of bone tissue engineering, their application in bone tissue regeneration is still in the basic experimental stage. To promote the clinical application of GFNs, there is a need to provide more sufficient evidence of their biocompatibility, elucidate the mechanism by which they induce the osteogenic differentiation of stem cells, and develop more effective form of applications.

3D printed Mg-incorporated polycaprolactone scaffolds for repairing rat skull defects / 口腔疾病防治

Objective@#To evaluate the bone repair effect of 3D-printed magnesium (Mg)-loaded polycaprolactone (PCL) scaffolds in a rat skull defect model.@*Methods@#PCL scaffolds mixed with Mg microparticles were prepared by using 3D printing technology, as were pure PCL scaffolds. The surface morphologies of the two scaffolds were observed by scanning electron microscopy (SEM), and the surface elemental composition was analyzed via energy dispersive spectroscopy (EDS). The physical properties of the scaffolds were characterized through contact angle measurements and an electronic universal testing machine. This study has been reviewed and approved by the Ethics Committee. A critical size defect model was established in the skull of 15 Sprague-Dawley (SD) rats, which were divided into the PCL group, PCL-Mg group, and untreated group, with 5 rats in each group. Micro-CT scanning was performed to detect and analyze skull defect healing at 4 and 8 weeks after surgery, and samples from the skull defect area and major organs of the rats were obtained for histological staining at 8 weeks after surgery.@*Results@#The scaffolds had a pore size of (480 ± 25) μm, a fiber diameter of (300 ± 25) μm, and a porosity of approximately 66%. The PCL-Mg scaffolds contained 1.0 At% Mg, indicating successful incorporation of Mg microparticles. The contact angle of the PCL-Mg scaffolds was 68.97° ± 1.39°, indicating improved wettability compared to that of pure PCL scaffolds. Additionally, compared with that of pure PCL scaffolds, the compressive modulus of the PCL-Mg scaffolds was (57.37 ± 8.33) MPa, demonstrating enhanced strength. The PCL-Mg group exhibited the best bone formation behavior in the skull defect area compared with the control group and PCL group at 4 and 8 weeks after surgery. Moreover, quantitative parameters, such as bone volume (BV), bone volume/total volume (BV/TV), bone surface (BS), bone surface/total volume (BS/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N) and bone mineral density (BMD), of skull defects were better than those in the other groups, indicating the best bone regeneration effect. H&E, Goldner, and VG staining revealed more mineralized new bone formation in the PCL-Mg group than in the other groups, and H&E staining of the major organs revealed good biosafety of the material.@*Conclusion@#PCL-Mg scaffolds can promote the repair of bone defects and have clinical potential as a new scaffold material for the repair of maxillofacial bone defects.

Reconstruction of rat calvarial defects utilizing an ultraviolet-cured hydrogel loaded with bone marrow mesenchymal stem cells / 口腔疾病防治

Objective@#To investigate the osteogenic properties of a methacrylated gelatin (GelMA) / bone marrow mesenchymal stem cells (BMSCs) composite hydrogel applied to the skull defect area of rats and to provide an experimental basis for the development of bone regeneration biomaterials.@*Methods@#This study was approved by the Animal Ethics Committee of Nanjing University. A novel photocurable composite biohydrogel was developed by constructing photoinitiators [lthium phenyl (2,4,6-trimethylbenzoyl) phosphinate, LAP], GelMA, and BMSCs. The surface morphology and elemental composition of the gel were examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The compressive strength of the gel was evaluated using an electronic universal testing machine. After in vitro culture for 1, 2, and 5 days, the proliferation of the BMSCs in the hydrogels was assessed using a CCK-8 assay, and their survival and morphology were examined through confocal microscopy. A 5 mm critical bone deficiency model was generated in a rat skull. The group receiving composite hydrogel treatment was referred to as the GelMA/BMSCs group, whereas the untreated group served as the control group. At the 4th and 8th weeks, micro-CT scans were taken to measure the bone defect area and new bone index, while at the 8th week, skull samples from the defect area were subjected to H&E staining, van Gieson staining, and Goldner staining to evaluate the quality of bone regeneration and new bone formation.@*Results@#SEM observed that the solidified GelMA showed a 3D spongy gel network with uniform morphology, the porosity of GelMA was 73.41% and the pore size of GelMA was (28.75 ± 7.13) μm. EDX results showed that C and O were evenly distributed in the network macroporous structure of hydrogel. The hydrogel compression strength was 152 kPa. On the 5th day of GelMA/BMSCs culture, the cellular morphology transitioned from oval to spindle shaped under microscopic observation, accompanied by a significant increase in cell proliferation (159.4%, as determined by the CCK-8 assay). At 4 weeks after surgery, a 3D reconstructed micro-CT image revealed a minimal reduction in bone defect size within the control group and abundant new bone formation in the GelMA/BMSCs group. At 8 weeks after surgery, no significant changes were observed in the control group's bone defect area, with only limited evidence of new bone growth; however, substantial healing of skull defects was evident in the GelMA/BMSCs group. Quantitative analysis at both the 4- and 8-week examinations indicated significant improvements in the new bone volume (BV), new bone volume/total bone volume (BV/TV), bone surface (BS), and bone surface/total bone volume (BS/TV) in the GelMA/BMSCs group compared to those in the control group (P<0.05). Histological staining showed continuous and dense formation of bone tissue within the defects in the GelMA/BMSCs group and only sporadic formation of new bone, primarily consisting of fibrous connective tissue, at the defect edge in the control group.@*Conclusion@#Photocuring hydrogel-based stem cell therapy exhibits favorable biosafety profiles and has potential for clinical application by inducing new bone formation and promoting maturation within rat skull defects.

Mechanism and application in tissue engineering of the active ingredient of Drynariae Rhizoma promoting bone defect repair / 中国药房

Bone defect has always been a major clinical challenge because of its great difficulty and long period of treatment. Drynariae Rhizoma is a commonly used medicine in osteology and traumatology of traditional Chinese medicine， and its active ingredients（mainly flavonoids） facilitate osteoblast differentiation of bone marrow mesenchymal stem cells， osteoclast proliferation， vascular-osteogenic coupling， and inhibit osteoclast activity to promote bone mineralization， and repair and reconstruction of bone defect. As a good substitute for bone regeneration drugs， the active constituents of Drynariae Rhizoma can be loaded on scaffold materials of tissue engineering， which greatly improves the bioavailability of the drug. Meanwhile， the sustained-release microspheres also solve some problems such as sudden drug release from the scaffolds， and the composite scaffolds with active ingredient of Drynariae Rhizoma prepared by them have good ossification activity and osteoinduction， with precise bone repair effects， which meet the diverse performance requirements of bone grafts and have a promising clinical application prospect.

Research progress on dedifferentiated fat cells and their application in oral and maxillofacial bone tissue engineering / 口腔疾病防治

@#The identification of suitable seed cells represents a critical scientific problem to be solved in the field of oral and maxillofacial bone tissue regeneration. The application of adipose-derived stem cells (ASCs) in tissue and organ repair and regeneration has been studied extensively. In recent years, dedifferentiated fat (DFAT) cells have also shown broad application prospects in the field of bone tissue engineering. DFAT cells express stem cell-related markers and have the potential to differentiate into adipocytes, osteoblasts, chondrocytes, nerve cells, cardiomyocytes and endothelial cells. In addition, DFAT cells also have the advantages of minimally invasive acquisition, strong proliferation and high homogeneity. Currently, all studies involving the application of DFAT cells in scaffold-based and scaffold-free bone tissue engineering can confirm their effectiveness in promoting bone regeneration. However, cytological research still faces some challenges, including relatively low cell culture purity, unclear phenotypic characteristics and undefined dedifferentiation mechanisms. It is believed that with the continuous development and improvement of isolation, culture, identification and directional induction of osteogenic differentiation methods, DFAT cells are expected to become excellent seed cells in the field of oral and maxillofacial bone tissue engineering in the future.

Unlocking the potential of amorphous calcium carbonate: A star ascending in the realm of biomedical application

Calcium-based biomaterials have been intensively studied in the field of drug delivery owing to their excellent biocompatibility and biodegradability. Calcium-based materials can also deliver contrast agents, which can enhance real-time imaging and exert a Ca2+-interfering therapeutic effect. Based on these characteristics, amorphous calcium carbonate (ACC), as a brunch of calcium-based biomaterials, has the potential to become a widely used biomaterial. Highly functional ACC can be either discovered in natural organisms or obtained by chemical synthesis However, the standalone presence of ACC is unstable in vivo. Additives are required to be used as stabilizers or core-shell structures formed by permeable layers or lipids with modified molecules constructed to maintain the stability of ACC until the ACC carrier reaches its destination. ACC has high chemical instability and can produce biocompatible products when exposed to an acidic condition in vivo, such as Ca2+ with an immune-regulating ability and CO2 with an imaging-enhancing ability. Owing to these characteristics, ACC has been studied for self-sacrificing templates of carrier construction, targeted delivery of oncology drugs, immunomodulation, tumor imaging, tissue engineering, and calcium supplementation. Emphasis in this paper has been placed on the origin, structural features, and multiple applications of ACC. Meanwhile, ACC faces many challenges in clinical translation, and long-term basic research is required to overcome these challenges. We hope that this study will contribute to future innovative research on ACC.

Advances in corneal stromal regeneration and repair / 国际眼科杂志(Guoji Yanke Zazhi)

Corneal stroma is a significant part of the cornea and plays a significant role in the eye's refractive system. Although corneal transplantation is now the most effective treatment for corneal stromal disease, its advancement has been constrained by a shortage of donors, the need for prolonged immunosuppressive medicine to prevent rejection, and low graft survival rates. An alternate strategy is to use the corneal stroma's natural capacity for regeneration to create the ideal conditions for the collagenous extracellular matrix of the stroma to self-renew. However, it is challenging to replicate the intricate ultrastructure of the corneal stroma in vitro. Regenerative medicine has so been used to address these issues. These approaches refer to numerous disciplines, including stem cell-induced differentiation, tissue engineering and gene editing. This article provides potential directions for the future clinical applications of corneal stromal regeneration and repair while summarizing pertinent techniques, research progress, and issues.

Research advances on stem cell-based treatments in animal studies and clinical trials of lymphedema / 中国修复重建外科杂志

OBJECTIVE@#To summarize the progress of the roles and mechanisms of various types of stem cell-based treatments and their combination therapies in both animal studies and clinical trials of lymphedema.@*METHODS@#The literature on stem cell-based treatments for lymphedema in recent years at home and abroad was extensively reviewed, and the animal studies and clinical trials on different types of stem cells for lymphedema were summarized.@*RESULTS@#Various types of stem cells have shown certain effects in animal studies and clinical trials on the treatment of lymphedema, mainly through local differentiation into lymphoid endothelial cells and paracrine cytokines with different functions. Current research focuses on two cell types, adipose derived stem cells and bone marrow mesenchymal stem cells, both of which have their own advantages and disadvantages, mainly reflected in the therapeutic effect of stem cells, the difficulty of obtaining stem cells and the content in vivo. In addition, stem cells can also play a synergistic role in combination with other treatments, such as conservative treatment, surgical intervention, cytokines, biological scaffolds, and so on. However, it is still limited to the basic research stage, and only a small number of studies have completed clinical trials.@*CONCLUSION@#Stem cells have great transformation potential in the treatment of lymphedema, but there is no unified standard in the selection of cell types, the amount of transplanted cells, and the timing of transplantation.

Effects of different polymers on biomimetic mineralization of small intestine submu-cosal scaffolds / 北京大学学报(医学版)

Objective:To explore the effects of different polymers on in vitro biomimetic mineralization of small intestinal submucosa(SIS)scaffolds,and to evaluate the physicochemical properties and bio-compatibility of the SIS scaffolds.Methods:The SIS scaffolds prepared by freeze-drying method were im-mersed in simulated body fluid(SBF),mineralized liquid containing polyacrylic acid(PAA)and mine-ralized liquid containing PAA and polyaspartic acid(PASP).After two weeks in the mineralized solu-tion,the liquid was changed every other day.SBF@SIS,PAA@SIS,PAA/PASP@SIS scaffolds were ob-tained.The SIS scaffolds were used as control group to evaluate their physicochemical properties and bio-compatibility.We observed the bulk morphology of the scaffolds in each group,analyzed the microscopic morphology by environment scanning electron microscopy and determined the porosity and pore size.We also analyzed the surface elements by energy dispersive X-ray spectroscopy(EDX),analyzed the struc-ture of functional groups by Flourier transformed infrared spectroscopy(FTIR),detected the water ab-sorption rate by using specific gravity method,and evaluated the compression strength by universal me-chanical testing machine.The pro-cell proliferation effect of each group of scaffolds were evaluated by CCK-8 cell proliferation method.Results:Under scanning electron microscopy,the scaffolds of each group showed a three-dimensional porous structure with suitable pore size and porosity,and crystal was observed in all the mineralized scaffolds of each group,in which the crystal deposition of PAA/PASP@SIS scaffolds was more regular.At the same time,the collagen fibers could be seen to thicken.EDX analysis showed that the characteristic peaks of Ca and P were found in the three groups of mineralized scaffolds,and the highest peaks were found in the PAA/PASP@SIS scaffolds.FTIR analysis proved that all the three groups of mineralized scaffolds were able to combine hydroxyapatite with SIS.All the scaf-folds had good hydrophilicity.The compressive strength of the mineralized scaffold in the three groups was higher than that in the control group,and the best compressive strength was found in PAA/PASP@SIS scaffold.The scaffolds of all the groups could effectively adsorb proteins,and PAA/PASP@SIS group had the best adsorption capacity.In the CCK-8 cell proliferation experiment,the PAA/PASP@SIS scaffold showed the best ability to promote cell proliferation with the largest number of living cells observed.Con-clusion:Compared with other mineralized scaffolds,PAA/PASP@SIS scaffolds prepared by mineralized solution containing both PAA and PASP have better physicochemical properties and biocompatibility and have potential applications in bone tissue engineering.

Research progress on the application of exosomes in periodontal regeneration / 实用口腔医学杂志

The prevalence of periodontal disease in Chinese population is more than 90％.The present treatment techniques can only control the development of the disease,inducement of bone tissue regeneration is a promising strategy and a challenge for the treatment.Exosomes are multivesicle structures derived from endosomes.More and more studies have been conducted on their application in perio-dontal regeneration.This paper reviews the application of exosome in periodontal regeneration in recent years,which is expected to pro-vide new idea for periodontal regeneration therapy.

Characteristics,advantages and application of osteogenic differentiation of jaw bone marrow mesenchymal stem cells / 中国组织工程研究

BACKGROUND:The repair of maxillofacial bone tissue defects is a hot and difficult point in current research and the selection of seed cells is the key.Jaw bone marrow mesenchymal stem cells are adult mesenchymal stem cells that exist in the jaw bone.They have advantages in the application of maxillofacial tissue regeneration. OBJECTIVE:To summarize the biological characteristics,osteogenic differentiation advantages of jaw bone marrow mesenchymal stem cells,and the effects of drugs,in vivo environment,and microRNAs on the osteogenic differentiation of jaw bone marrow mesenchymal stem cells. METHODS:Computers were used to perform literature retrieval in PubMed and CNKI.Chinese and English search terms were"oral,bone tissue engineering,stem cells".405 articles were retrieved and downloaded.The articles were screened according to the inclusion and exclusion criteria and 70 articles were finally included for literature review. RESULTS AND CONCLUSION:Jaw bone marrow mesenchymal stem cells were excellent seed cells for oral bone tissue engineering,and had good proliferation and osteogenic differentiation potential.Drugs,in vivo environment and microRNAs could regulate the osteogenic differentiation of jaw bone marrow mesenchymal stem cells.However,the research on jaw bone marrow mesenchymal stem cells was still in the initial stage,so more research with strong demonstration is needed to confirm that jaw bone marrow mesenchymal stem cells have more advantages in the application of maxillofacial bone tissue regeneration.

Preparation and in vitro evaluation of a three-dimensional porous cartilage scaffold made of silk fibroin/gelatin/chitosan / 中国组织工程研究

BACKGROUND:Cartilage defects are one of the major clinical challenges faced by orthopedic surgeons.Tissue engineering is an interdisciplinary approach that combines knowledge of engineering and cell biology to provide new ideas and approaches for the repair of cartilage defects. OBJECTIVE:To prepare a multi-component composite scaffold based on silk fibroin,gelatin,and chitosan to screen for a three-dimensional porous scaffold suitable for cartilage regeneration by evaluating its physicochemical properties and biological performance. METHODS:Four groups of porous scaffolds were prepared by vacuum freeze-drying method using silk fibroin,gelatin and chitosan as the base materials,namely chitosan/gelatin scaffold,silk fibroin/chitosan scaffold,silk fibroin/gelatin scaffold and silk fibroin/chitosan/gelatin scaffold.The suitable cartilage scaffolds were screened by scanning electron microscopy,X-ray diffractometer,porosity,water absorption and swelling rate,biodegradation rate and mechanical property detection.Then cartilage scaffolds were co-cultured with chondrocytes isolated and extracted from patients with osteoarthritis.The feasibility of porous scaffolds for cartilage injury repair was evaluated in vitro by cell adhesion rate assay,cell live-dead staining and cell activity proliferation assay. RESULTS AND CONCLUSION:(1)All four groups of scaffolds had porous structures.The comprehensive physical performance test results showed that the silk fibroin/gelatin/chitosan scaffold was more in line with the requirements of cartilage defect repair.This scaffold had a pore size of(176.00±53.68)μm,the porosity of(80.15±2.57)%,and water absorption and swelling rate of(3 712±358)%.After immersion in PBS containing lysozyme for 28 days in vitro,the biodegradation rate was(46.87±3.25)%,and it had good mechanical properties.(2)Chondrocytes could adhere well on the silk fibroin/gelatin/chitosan scaffold,and the cell adhesion rate increased with time.CCK8 and live/dead cell double staining results showed that silk fibroin/gelatin/chitosan scaffold had good biocompatibility and low cytotoxicity.(3)The results showed that silk fibroin/gelatin/chitosan scaffold had a highly hydrated 3D structure,suitable pore size and porosity,good biodegradability and superior mechanical properties,which can provide a good reticular skeleton and microenvironment for nutrient transport and chondrocyte attachment and proliferation.

Leukocyte-and platelet-rich fibrin with autologous hamstring tendon for traumatic patella dislocation / 中国组织工程研究

BACKGROUND:Traumatic patellar dislocation with medial patellofemoral ligament tearing at femoral attachment or body is usually performed by medial patellofemoral ligament reconstruction surgery.To promote tendon bone healing after medial patellofemoral ligament reconstruction,the researchers used a variety of biological treatment technologies including growth factors,stem cells and platelet-rich plasma. OBJECTIVE:To investigate the clinical effect of medial patellofemoral ligament reconstruction by leukocyte-and platelet-rich fibrin with autologous hamstring tendon for traumatic patellar dislocation. METHODS:Thirty-seven patients with traumatic patellar dislocation in First Hospital of Qinhuangdao from February 2019 to February 2021 were randomly divided into a trial group(n=18)and a control group(n=19).The trial group received medial patellofemoral ligament reconstruction by leukocyte-and platelet-rich fibrin with an autologous hamstring tendon.The control group received medial patellofemoral ligament reconstruction by a simple autologous hamstring tendon.Patients in the two groups were followed up for 12 months.Knee pain and functional status were evaluated by visual analog scale score,Lysholm score,Kujala patellofemoral joint score and knee range of motion.The patellar tilt angle,patellar congruence angle and patellar lateral shift rate of the patellofemoral joint were measured by MRI and CT films to evaluate the stability and improvement of the patellofemoral joint. RESULTS AND CONCLUSION:(1)The visual analog scale scores of the two groups at 6 and 12 months after operation were lower than those before operation(P<0.05).The Lysholm score and Kujala patellofemoral joint score at 6 and 12 months after operation were higher than those before operation(P<0.05).The Lysholm score and Kujala patellofemoral joint score in the trial group were higher than those in the control group 6 months after operation(P<0.05).There was no significant difference between the two groups in the visual analog scale score,Lysholm score and Kujala patellofemoral joint score 12 months after operation(P>0.05).(2)The patellar tilt angle,patellar congruence angle,patellar lateral shift rate and range of motion of the patellofemoral joint were significantly improved in both groups 12 months after operation(P<0.05).The patellar tilt angle was smaller in the trial group than that in the control group 12 months after operation(P<0.05).Patellar congruence angle,patellar lateral shift rate,range of motion and MRI score were not statistically significant between the two groups 12 months after operation(P>0.05).(3)These results confirm that medial patellofemoral ligament reconstruction by leukocyte-and platelet-rich fibrin with autologous hamstring tendon can treat traumatic dislocation effectively,improve the function of the knee joint,and restore the movement track of the patella.

Strategy and significance of Chinese medicine combined with medical hydrogel for disease treatment / 中国组织工程研究

BACKGROUND:Medical hydrogels are new functional polymer materials with three-dimensional structural networks and excellent biocompatibility,which have been widely studied in the field of tissue engineering and drug carriers,but the research on the combination of medical hydrogels and Chinese medicine for the treatment of diseases based on tissue engineering is still in the early exploration stage.Therefore,through the analysis of the mechanism of the role of medical hydrogels,the integration of medical hydrogels and Chinese medicine in the research of the joint application of the article,can better provide ideas for scientific researchers,and the joint application of Chinese medicine and medical hydrogels is of great significance. OBJECTIVE:To explore the strategy and significance of Chinese medicine combined with medical hydrogel for disease treatment based on tissue engineering research. METHODS:PubMed and CNKI were used to retrieve articles about the application of Chinese medicine combined with medical hydrogel in tissue engineering from January 2010 to November 2022,with the Chinese and English search terms"hydrogel,traditional Chinese medicine,drug carrier,tissue engineering".After the initial screening of all articles according to the inclusion and exclusion criteria,the 61 articles with high relevance were retained for review. RESULTS AND CONCLUSION:(1)Although the application of Chinese medicine combined with medical hydrogel is involved in intra-articular,intra-tissue organ,soft tissue wounds,tissue engineering,etc.,except for the clinical application of Chinese medicine combined with hydrogel dressing for soft tissue injury,other aspects are still in the experimental stage.(2)The development of Chinese medicine combined with medical hydrogel has great potential and development prospects,but there is a certain difficulty in the manufacture of the gel with high-performance requirements,and it is difficult to master the physical and chemical properties precisely.(3)At present,the comprehensive view of injectable hydrogel with the characteristics of easy to use,its joint use of Chinese medicine can be extended to a wider range,can be used for joint,organ,tissue engineering-related disease treatment.Smart hydrogel has high sensitivity and reversible transformation can also meet the use of the special environment.During the combined use of Chinese medicine,it also needs to understand the mechanism of action of Chinese medicine components.(4)The strategy of combining Chinese medicine with medical hydrogels for disease treatment should start with matching the therapeutic effects of Chinese medicine on organs,tissues and cells combined with appropriate types of medical hydrogels to make up for the shortcomings of traditional Chinese medicine delivery methods and frequent drug delivery.In tissue engineering,hydrogels can be loaded with stem cells after Chinese medicine intervention,or with both Chinese medicine and stem cells for disease treatment.(5)In future research of combined Chinese medicine and medical hydrogel application,we also need to consider:we should ensure that the biological properties of medical hydrogel can be quantified,and grasp the characteristics of hydrogel with different manufacturing processes of different materials to produce the required medical hydrogel that meets the application conditions.In Chinese medicine,we need to comprehensively understand and analyze the therapeutic effects and application mechanisms of known Chinese medicine monomer and Chinese medicine compound extracts,so as to achieve a more perfect combination between Chinese medicine and medical hydrogel under a more clear mechanism.With the continuous improvement of medical science and technology innovation,the medical hydrogel can be innovatively combined with other traditional treatment methods of Chinese medicine,such as acupuncture,massage,cupping and so on,to be used from multiple angles.

Electrospun nanofiber scaffolds for soft and hard tissue regeneration / 中国组织工程研究

BACKGROUND:Currently,electrospun nanofibers,which are biomimetic materials of natural extracellular matrix and contain a three-dimensional network of interconnected pores,have been successfully used as scaffolds for various tissue regeneration,but are still faced with the challenge of extending the biomaterials into three-dimensional structures to reproduce the physiological,chemical as well as mechanical properties of the tissue microenvironment. OBJECTIVE:To summarize the process and principles of electrostatic spinning and to explore the applications of the resulting electrospun nanofibers in tissue regeneration of skin,blood vessels,nerves,bone,cartilage and tendons/ligaments. METHODS:With"electrospinning,electrospun nanofibers,electrospun nanofiber scaffolds,tissue regeneration"as the Chinese and English search terms,Google Academic Database,PubMed,and CNKI were searched,and finally 88 articles were included for review. RESULTS AND CONCLUSION:(1)The electrospun nanofibers are a natural fibrous extracellular matrix mimetic material and contain a three-dimensional network of interconnected pores that have been successfully used as scaffolds for a variety of tissue regeneration applications.(2)Several papers have described the great potential of electrospun nanofiber scaffolds applied to the regeneration of skin,blood vessels,nerves,bones,cartilage and tendons/ligaments,providing a solid theoretical basis for its final application in clinical disease treatment,or for its transformation into practical products to enter the market.(3)However,the current research results are mostly based on cell experimental research results in vitro,and whether it can be finally applied to human body still needs clinical verification.(4)At present,many kinds of electrospun products for various clinical needs have been commercialized in and outside China,indicating that the research field of electrospun nanofiber scaffolds for soft and hard tissue regeneration has great research value and application potential.