Measurement of Elastic Modulus and Vickers Hardness of Surround Bone Implant Using Dynamic Microindentation - Parameters Definition

The clinical performance of dental implants is strongly defined by biomechanical principles. The aim of this study was to quantify the Vicker's hardness (VHN) and elastic modulus (E) surround bone to dental implant in different regions, and to discuss the parameters of dynamic microindantion test. Ten cylindrical implants with morse taper interface (Titamax CM, Neodent; 3.5 mm diameter and 7 mm a height) were inserted in rabbit tibia. The mechanical properties were analyzed using microhardness dynamic indenter with 200 mN load and 15 s penetration time. Seven continuous indentations were made distancing 0.08 mm between each other perpendicularly to the implant-bone interface towards the external surface, at the limit of low (Lp) and high implant profile (Hp). Data were analyzed by Student's t-test (a=0.05) to compare the E and VHN values obtained on both regions. Mean and standard deviation of E (GPa) were: Lp. 16.6 ± 1.7, Hp. 17.0 ± 2.5 and VHN (N/mm2): Lp. 12.6 ± 40.8, Hp. 120.1 ± 43.7. No statistical difference was found between bone mechanical properties of high and low profile of the surround bone to implant, demonstrating that the bone characterization homogeneously is pertinent. Dynamic microindantion method proved to be highly useful in the characterization of the individual peri-implant bone tissue.

O desempenho clínico de implantes dentais é fortemente definido por princípios biomecânicos. Este trabalho objetivou quantificar a Dureza Vickers (VHN) e módulo de elasticidade (E) do osso periimplantar e discutir parâmetros metodológicos de ensaio dinâmico de indentação. Foram utilizados 10 implantes de corpo cilíndrico com interface cone morse, (Titamax CM; Neodent, Curitiba, PR, Brasil), diâmetro de 3.5 mm e altura de 7 mm inseridos em tíbia de coelho recém obtidas após abate dos animais. As propriedades mecânicas foram analisadas usando penetrador dinâmico de microdureza Vickers (CSM Micro-Hardness Tester; CSM Instruments, Peseux, Switzerland) com carga de 200 mN e tempo de penetração de 15s. Foram feitas 7 indentações no osso cortical na base da rosca (Br) e na ponta da rosca (Pr) na direção perpendicular ao implante, com distância entre elas de 0,08 mm perpendicular a interface osso implante em direção a superfície esterna. Os dados foram analisados por meio de teste t-Student (P<0,05). O valores médios e desvio padrão de E (GPa) foram: Br. 16,6 ± 1,7A; Pr. 17,0 ± 2,5A e VHN (N/mm2): Br. 125,6 ± 40,8A; Pr. 120,1 ± 43,7A. Não houve diferença significativa entre as propriedades mecânicas avaliadas no osso na base e na ponta da rosca do implante, demonstrando que a caracterização desta estrutura de forma homogênea em análises computacionais é pertinente. O método de indentação dinâmica mostrou ser altamente útil na caracterização individualizada do tecido ósseo periimplantar.

Comparison of Resistance to gamma-Irradiation between Cryptosporidium parvum and Cryptosporidium muris Using In Vivo Infection

In the genus Cryptosporidium, there are more than 14 species with different sizes and habitats, as well as different hosts. Among these, C. parvum and C. hominis are known to be human pathogens. As C. parvum can survive exposure to harsh environmental conditions, including various disinfectants or high doses of radiation, it is considered to be an important environmental pathogen that may be a threat to human health. However, the resistance of other Cryptosporidium species to various environmental conditions is unknown. In this study, resistance against gamma-irradiation was compared between C. parvum and C. muris using in vivo infection in mice. The capability of C. muris to infect mice could be eliminated with 1,000 Gy of gamma-irradiation, while C. parvum remained infective in mice after up to 1,000 Gy of gamma-irradiation, although the peak number of oocysts per gram of feces decreased to 16% that of non-irradiated oocysts. The difference in radioresistance between these 2 Cryptosporidium species should be investigated by further studies.