Interchangeability of medications and biopharmaceutical implication of taking drugs with fluids other than water: ibuprofen case study

Abstract The aim of this study was to compare the dissolution properties of ibuprofen solid oral dosage forms commercially available in Bosnia and Herzegovina and to estimate the influence of dissolution medium composition on the drug release. Eight products (A-H) were subjected to in vitro dissolution test using experimental conditions described in USP42-NF37. Dissolution properties of one selected product were examined in the presence of alcohol (22.2% v/v) and fruit juice (22.2% v/v). Products marked B-H complied with the pharmacopeial criteria. Dissolution profile of product B was similar with dissolution profiles of products D, E, F and G and similarity was also found between products A-D, C-G, D-G and E-F. Drug release from most of the examined preparations fitted best to the Weibull kinetic model. In the presence of alcohol in the medium, higher amount of ibuprofen was dissolved. Contrary, ibuprofen dissolved in the presence of fruit juice was significantly lower. Differences in the dissolution profiles of investigated preparations suggest that their interchangeability should be additionally considered and demonstrated with in vivo bioequivalence studies. Presence of different substances in the medium can affect dissolution properties of ibuprofen, emphasizing the importance of the patient's compliance.

Sustained release matrix tablet of 100 mg losartan potassium: Formulation development and in vitro characterization

Abstract Sustained release matrix tablets of 100 mg losartan potassium HCl were fabricated with two release retarding polymers namely HPMC K100 M and affinisol by direct compression method. Nine trial formulations were prepared by varying content of these polymers, each from 50 mg to 100 mg; keeping the total weight of the tablet 310 mg. The best formulation was selected based on in vitro drug release profile for 12 hours conducted in Type II dissolution apparatus at 50 rpm and water as dissolution medium. Pre-compression parameters such as bulk density, tap density, Carr's index and Hausner ratio were evaluated for the selected tablet. The tablets were subjected to thickness, weight variation test, drug content, hardness and friability. Drug release kinetics, surface morphology and accelerated stability study were investigated for that selected formulation. Formulation F4 with the composition of 75 mg HPMC K100M and 100 mg affinisol was selected as the best formulation that extended the drug release up to 12 hours. Pre-compression parameters and other tableting properties were within the Pharmacopoeia limit. Release kinetics analysis proved non-fickian zero-order drug release and that was further confirmed by surface morphology of the tablets before and after dissolution study visualized by SEM. The developed formulation was found to be stable for one month stored at 60 ○C.

Formulation development and pharmacokinetic studies of long acting in situ depot injection of risperidone

Abstract Risperidone is an atypical antipsychotic drug widely prescribed all over the world due to its clinical advantages. The currently available long acting marketed depot formulation of risperidone is a microsphere based preparation using poly-[lactide-co-glycolide] (PLGA) as drug release barrier. It is however, a cold chain product due to thermal instability of PLGA at room temperature. After beginning the depot injection therapy it is administered every two weeks but associated with another drawback of about 3 weeks lag time due to which its tablets are also administered for three weeks so as to attain and maintain therapeutic drug concentration in the body. The present work attempts to develop a long acting depot delivery system of risperidone for once a month administration based on the combination of sucrose acetate isobutyrate and polycaprolactone dissolved in benzyl benzoate to provide an effective drug release barrier for one month without any lag time and which can be stored at room temperature precluding the requirement of cold supply chain. The developed depot formulation showed a sustained in vitro drug release profile with 88.95% cumulative drug release in 30 days with little burst release. The in vivo pharmacokinetic studies of the developed formulation conducted on rats showed attainment of mean peak plasma drug concentration of 459.7 ng/mL in 3 days with a mean residence time of 31.2 days, terminal half-life of 20.6 days, terminal elimination rate constant of 0.0336 per day, and a good in vitro- in vivo correlation.

Nanostructured lipid carrier containing hydroxymethylnitrofurazone: preparation, characterization and in vitro and in vivo evaluation of leishmanicidal activity / Carreador lipídico nanoestruturado contendo hidroximetilnitrofural: preparação, caracterização físico-química e avaliação in vitro e in vivo da atividade leishmanicida

Leishmaniasis, a neglected tropical disease (NTD), is a set of diseases caused by obligatory parasitic protozoa of the genus Leishmania. And it has cutaneous and visceral eishmaniasis as its main forms. Treatment includes pentavalent antimonials. These drugs have several disadvantages, such as the need for parenteral administration, use of high dosages, long duration of treatment, severe toxicity, resistance and variable efficacy. The candidate for hydroxymethylnitrofural drug (NFOH), a prodrug derived from nitrofural, showed high activity in cell cultures infected with Trypanosoma cruzi and less toxicity when compared to nitrofural. Due to its low solubility in water and reduced bioavailability, NFOH has failed the in vivo efficacy tests. Nanostructured drug delivery systems have the potential to overcome these challenges due to their evident advantages: greater therapeutic efficacy, less toxicity, modified drug release and increased gastrointestinal absorption of drugs with low water solubility. The objective of this project will be the preparation and evaluation of the physicochemical characteristics of a nanostructured lipid carrier containing hydroxymethylnitrofural (NLC-NFOH). The NFOH showed the highest solubility in Miglyol® 840 among the tested liquid lipids. For solid lipids, Gelucire® 50/13 and Precirol® ATO5 proved to be more suitable for the solubilization of NFOH. The optimized NLC-NFOH consisted of these three lipids. These lipids were selected using a quick Technobis Crystal 16TM methodology, microscopy and DSC. Different lipid selection tools provided scientific knowledge relevant to the development of NLC. The NLC-NFOH had an average z of 198.6 ± 5.4 nm, a PDI of 0.11 ± 0.01 and a zeta potential of -13.7 ± 0.7 mV. This study allowed a design space development approach of the first NLC-NFOH with the potential to treat leishmaniasis orally. The development of a sensitive bioanalytical method using HPLC and evaluation of some analytical figures of merit for the validation allowed the quantification of NFOH and NF. The bioanalytical method for analysis of NFOH and NF use Zorbax SB-C18, 5µm, (4.6x250mm) HPLC column. The mobile phase was consisted of acetonitrile:water (20:80 v/v) with flow rate of 1.2 ml/min, at UV detection of 370 nm. The linearity of NFOH and NF was found in the range 0.0253.0 µg/ml with a correlation coefficient of r > 0.98. The precision was 2.44 to 13.77% for NFOH and 2.61 to 18.42%; the accuracy was 2.66 to 14.28% for NFOH and 2.09 to 19.06% for NF. The method showed to be suitable for effectively evaluation of NFOH is serum. NLC-NFOH (2.8 mg/kg) was administered to animals by gavage, and the blocking flow of the chylomicrons model was performed with an intraperitoneal injection of cycloheximide. The presence of NFOH in serum was evaluated with and without cycloheximide. The cytotoxicity assay of NLC-NFOH and blank-NLC showed more than 90% viable cells at the maximum concentration used (2560 µM). NFOH and NF were detected at 1h after the gavage of DMSO-NFOH or NLC-NFOH, without the pretreatment with cycloheximide. The concentration found for DMSO-NFOH and NLC-NFOH were 0.0316 and 0.0291 µg/mL, respectively. The NLC presented the NFOH absorption by the lymphatic system, demonstrated by blocking chylomicrons flow

A leishmaniose, uma doença tropical negligenciada (DTN), é um conjunto de doenças causadas por protozoários parasitas obrigatórios do gênero Leishmania. E tem como formas principais a leishmaniose cutânea e visceral. O tratamento inclui antimoniais pentavalentes. Esses fármacos apresentam várias desvantagens, como necessidade de administração parenteral, uso de altas dosagens, longa duração do tratamento, toxicidade grave, resistência e eficácia variável. O candidato ao fármaco hidroximetilnitrofural (NFOH), um pró-fármaco derivado do nitrofural, apresentou alta atividade em culturas de células infectadas pelo Trypanosoma cruzi e menor toxicidade quando comparado ao nitrofural. Devido à sua baixa solubilidade em água e biodisponibilidade reduzida, o NFOH falhou nos testes de eficácia in vivo. Os sistemas nanoestruturados de liberação de fármacos têm potencial para superar esses desafios devido às suas vantagens evidentes: maior eficácia terapêutica, menor toxicidade, liberação modificada do fármaco e aumento da absorção gastrointestinal de fármacos com baixa solubilidade em água. O objetivo deste projeto será a preparação e avaliação das características físico-químicas de um carreador lipídico nanoestruturado contendo hidroximetilnitrofural (NLC-NFOH). O NFOH apresentou a maior solubilidade no Miglyol® 840 entre os lipídios líquidos testados. Para lipídios sólidos, Gelucire® 50/13 e Precirol® ATO5 se mostraram mais adequados para a solubilização de NFOH. O NLC-NFOH otimizado consistiu desses três lipídios. Esses lipídios foram selecionados usando Technobis Crystal 16TM, microscopia e DSC. Diferentes ferramentas de seleção de lipídios forneceram conhecimento científico relevante para o desenvolvimento de NLC. O NLC-NFOH teve z-average de 198,6 ± 5,4 nm, PDI de 0,11 ± 0,01 e potencial zeta de -13,7 ± 0,7 mV. Este estudo permitiu o desenvolvimento por abordagem de Design Space do primeiro NLC-NFOH com potencial para tratar a leishmaniose por via oral. O desenvolvimento de um VIII método bioanalítico sensível utilizando HPLC e a avaliação de algumas figuras analíticas de mérito para a validação permitiram a quantificação de NFOH e NF em soro. O método bioanalítico para análise de NFOH e NF usou coluna de HPLC Zorbax SB-C18, 5 µm, (4,6 x 250 mm). A fase móvel foi constituída por acetonitrila: água (20:80 v / v) com vazão de 1,2 ml / min, com detecção no UV de 370 nm. A linearidade de NFOH e NF foi encontrada na faixa de 0,0253,0 µg / ml com um coeficiente de correlação de r> 0,98. A precisão foi de 2,44 a 13,77% para NFOH e 2,61 a 18,42%; a precisão foi de 2,66 a 14,28% para NFOH e 2,09 a 19,06% para NF. O método mostrou-se adequado para avaliação efetiva do NFOH no soro. NLC-NFOH (2,8 mg / kg) foi administrado aos animais por gavagem, e o modelo de bloqueio do fluxo de quilomícrons foi realizado com injeção intraperitoneal de cicloheximida. A presença de NFOH no soro foi avaliada com e sem cicloheximida. O ensaio de citotoxicidade de NLC-NFOH e brancoNLC mostrou mais de 90% de células viáveis na concentração máxima utilizada (2560 µM). NFOH e NF foram detectados 1h após a gavagem de DMSO-NFOH ou NLC-NFOH, sem o pré-tratamento com cicloheximida. As concentrações encontradas para DMSO-NFOH e NLC-NFOH foram 0,0316 e 0,0291 µg / mL, respectivamente. O NLC apresentou a absorção do NFOH pelo sistema linfático, demonstrada pelo bloqueio do fluxo dos quilomícrons

Development of controlled release dexketoprofen tablets and prediction of drug release using Artificial Neural Network (ANN) modelling

Dexketoprofen trometamol (DT) is an active S (+) enantiomer of ketoprofen, and a non-steroidal anti-inflammatory agent. DT has a short biological half-life and the dosing interval is quite short when there is a need to maintain the desirable effect for longer time periods. Consequently, a controlled release DT tablet was designed for oral administration aiming to minimize the number of doses and the possible side effects. Calculations of the parameters for controlled release DT tablets were shown clearly. Controlled release matrix-type tablet formulations were prepared using hydroxypropyl methylcellulose (HPMC) (low and high viscosity), Eudragit RS and Carbopol, and the effects of different polymers on DT release from the tablet formulations were investigated. The dissolution rate profiles were compared and analyzed kinetically. An Artificial Neural Network (ANN) model was developed to predict drug release and a successful model was obtained. Subsequently, an optimum formulation was selected and evaluated in terms of its analgesic and anti-inflammatory activity. Although the developed controlled release tablets did not have an initial dose, they were found to be as effective as commercially available tablets on the market. Dissolution and in vivo studies have shown that the prepared tablets were able to release DT for longer time periods, making the tablets more effective, convenient and more tolerable.

A nanoemulsion-based delivery system for imatinib and in vitro anticancer efficacy

A self-nanoemulsifying drug delivery system (SNEDDS) composed of ethyl oleate, Tween 80 and polyethylene glycol 600 was prepared as a new route to improve the efficacy of imatinib. The drug-loaded SNEDDS formed nanodroplets of ethyl oleate stabilized by Tween 80 and polyethylene glycol 600 with a diameter of 81.0±9.5 nm. The nanoemulsion-based delivery system was stable for at least two months, with entrapment efficiency and loading capacity of 16.4±0.1 and 48.3±0.2%, respectively. Imatinib-loaded SNEDDS was evaluated for the drug release profiles, and its effectiveness against MCF-7 cell line was investigated. IC50 values for the imatinib-loaded SNEDDS and an imatinib aqueous solution were 3.1 and 6.5 µg mL-1, respectively.

Stents farmacológicos: estado atual / Drug-eluting stents: state-of-the-art

Stents farmacológicos foram desenvolvidos para reduzir a resposta proliferativa neointimal e consequentemente a reestenose, mais frequente limitação da intervenção coronária percutânea com balão e stents não faramcológicos. O desenvolvimento destes dispositivos baseia-se no maior entendimento da biologia da reestenose, na seleção de fármacos anti-proliferativos adequados para os diversos mecanismos envolvidos nesta complicação e no uso de plataformas/polímeros adequados para entrega do fármaco. Consequentemente o desempenho destes dispositivos depende da perfeita interação de todos estes elementos. As abordagens atuais para minimizar a reestenose são revisados neste capítulo. Embora a primeira geração dos stents farmacológicos tenha sido focada na eficácia em reduzir a reestenose, questões relacionadas à sua segurança surgiram, comprometendo seu uso mais disseminado. As novas gerações de stents farmacológicos com polímeros duráveis ou bioabsorvíveis conseguiu reduzir as taxas de nova intervenção e de trombose. Embora o modelo ideal de stent farmacológico ainda esteja em investigação, é certo que esta tecnologia já se estabeleceu como primeira linha na intervenção coronária percutânea contemporânea

Influence of different formulation variables on the performance of transdermal drug delivery system containing tizanidine hydrochloride: in vitro and ex vivo evaluations

The present study was aimed at preparation of transdermal patches of tizanidine HCl, evaluation of the effect of polymers on in vitro release pattern of the drug, and the effect of permeation enhancers on the penetration of the drug through the rabbit skin. Various proportions of hydrophilic (HPMC) and hydrophobic (Eudragit L-100) polymers were used with PEG 400 as film-forming agent, and Span 20 or DMSO as permeation enhancer. The formulations were assessed for physicochemical characteristics and in vitro drug release studies using USP paddle over disc method in phosphate buffered saline (pH 7.4) at 32.0±1°C. On the basis of in vitro studies and physicochemical evaluations, S03-A and S04-A were selected at Eudragit : HPMC ratios of 8 : 2 and 7 : 3, respectively, for further ex vivo analysis. The effects of different concentrations of Span 20 and DMSO were evaluated on excised rabbit skin using Franz diffusion cell. Cumulative drug permeation, flux, permeability coefficient, target flux, and enhancement ratio were calculated and compared with the control formulations. Kinetic models and Tukey's multiple comparison test were applied to evaluate the drug release patterns. Formulation SB03-PE containing Eudragit L-100:HPMC (7:3) with Span 20 (15% w/w) produced the highest enhancement in drug permeation, and followed zero order kinetic model with super case-II drug release mechanism.

Phenobarbital loaded microemulsion: development, kinetic release and quality control

ABSTRACT This study aimed to obtain and characterize a microemulsion (ME) containing phenobarbital (PB). The PB was incorporated in the proportion of 5% and 10% in a microemulsion system containing Labrasol(r), ethanol, isopropyl myristate and purified water. The physicochemical characterization was performed and the primary stability of the ME was evaluated. An analytical method was developed using spectrophotometry in UV  = 242 nm. The kinetics of the in vitro release (Franz model) of the ME and the emulsion (EM) containing PB was evaluated. The incorporation of PB into ME at concentrations of 5 and 10% did not change pH and resistance to centrifugation. There was an increase in particle size, a decrease of conductivity and a change in the refractive index in relation to placebo ME. The ME remained stable in preliminary stability tests. The analytical method proved to be specific, linear, precise, accurate and robust. Regarding the kinetics of the in vitro release, ME obtained an in vitro release profile greater than the EM containing PB. Thus, the obtained ME has a potential for future transdermal application, being able to compose a drug delivery system for the treatment of epilepsy.

RESUMO O objetivo deste trabalho foi obter e caracterizar uma microemulsão (ME) contendo fenobarbital (FEN). O FEN foi incorporado na proporção de 5% e 10% em um sistema microemulsionado composto por labrasol(r), etanol, miristato de isopropila e água purificada. Foi realizada a caracterização físico-química e avaliada a estabilidade preliminar da ME. Desenvolveu-se um método analítico por espectrofotometria em UV  = 242 nm. Foi avaliada a cinética de liberação in vitro (em modelo de Franz) da ME e da emulsão (EM) contendo FEN. A incorporação do FEN em ME nas concentrações de 5 e 10% não alterou o pH e a resistência à centrifugação. Houve aumento do tamanho da partícula, redução da condutividade e alteração do índice de refração em relação à ME placebo. A ME manteve-se estável nos ensaios de estabilidade preliminar. O método analítico demonstrou ser específico, linear, preciso, exato e robusto. Na cinética de liberação in vitro, a ME obteve um perfil de liberação in vitro superior a EM contendo FEN. Desta forma, a ME obtida tem potencial para uma futura aplicação transdérmica, podendo compor um sistema de liberação de fármacos para tratamento da epilepsia.

Formulation and evaluation of orally disintegrating clopidogrel tablets

ABSTRACT Recent advances in drug delivery systems have aimed to achieve better patient compliance. One of these advances is the formulation of orally disintegrating tablets (ODTs) that dissolve instantaneously, releasing drugs within a few seconds without the need of water. The main objective of this paper was to prepare and develop ODTs of clopidogrel. The ODTs were prepared by direct compression. The effect of three superdisintegrants, namely crospovidone, croscarmellose sodium, and sodium starch glycolate, using three different disintegration times on the dissolution rate was investigated. The prepared tablets were evaluated for hardness, friability, disintegration time and in vitro drug release. Furthermore, the interaction of clopidogrel with the formulation excipients was studied using differential scanning calorimetry (DSC). DSC studies revealed that there were no interactions between the drug and the excipients used. All tablets had hardness values in the range 4.0-5.2 kp and friability lower than 1%. The weight and drug content uniformity of all formulations was within official limits according to BP. In vitro drug release studies of the ODTs showed that more than 90% of the drug was released within ten minutes. A palatability test in human volunteers showed acceptable taste and mouth feel. Thus, the obtained results conclusively demonstrated successful rapid disintegration of the formulated tablets and acceptable palatability.

RESUMO Recentes avanC'os em sistemas de liberaC'C#o de fC!rmacos novos visam C obtenC'C#o de melhor adesC#o do paciente. Um destes avanC'os C) a formulaC'C#o de comprimidos de desintegraC'C#o oral (ODTs), que se dissolvem instantaneamente, liberando o fC!rmaco, em alguns segundos, sem a necessidade de C!gua. O principal objetivo deste trabalho foi preparar e desenvolver ODTs de clopidogrel. Os ODTs foram preparados pelo mC)todo de compressC#o direta. Estudou-se o efeito de vC!rias concentraC'C5es de diferentes agentes de desintegraC'C#o, tais como super-crospovidona, croscarmelose de sC3dio, glicolato de amido de sC3dio no tempo de desintegraC'C#o e velocidade de dissoluC'C#o. Os comprimidos preparados foram avaliados quanto C dureza, C friabilidade, ao tempo de desintegraC'C#o e C liberaC'C#o do fC!rmaco in vitro. AlC)m disso, estudou-se a interaC'C#o de clopidogrel com os excipientes de formulaC'C#o, utilizando calorimetria de varredura diferencial (DSC). Estudos de DSC revelaram nC#o haver interaC'C#o entre o fC!rmaco e os excipientes utilizados. Todos os comprimidos possuC-am dureza na faixa de 4,0-5,2 kp e a friabilidade inferior a 1%. A variaC'C#o de peso e o teor de fC!rmaco de todas as formulaC'C5es mostraram-se dentro do limite oficial, de acordo com a BP. O estudo de liberaC'C#o do fC!rmaco in vitro de comprimidos ODTs mostrou que mais de 90% do fC!rmaco foram liberados em10 minutos. O teste de palatabilidade em voluntC!rios humanos mostrou sabor e sensaC'C#o na boca aceitC!veis. Assim, os resultados obtidos demonstraram, conclusivamente, a rC!pida e bem-sucedida desintegraC'C#o dos comprimidos formulados e a palatabilidade aceitC!vel.

A novel dosage form for buccal administration of bupropion

Bupropion is an antidepressant used in the treatment of smoking. The purpose of this study was to prepare controlled-release hydrogel films for buccal administration of bupropion and investigate its physicochemical and cytotoxic properties. The films were prepared from ultrapure sodium carboxymethylcellulose, hydroxypropylmethylcellulose K4M, and medium-viscosity chitosan. Evaluation of film physicochemical characteristics was based on scanning electron microscopy, bupropion content, mechanical strength (burst strength, relaxation, resilience, and traction), and cytotoxicity. Bupropion content in bilayer films was 121 mg per 9 cm2. The presence of bupropion modified film mechanical strength, but did not compromise the use of this pharmaceutical form. As shown by the cytotoxicity results, films containing bupropion did not cause cellular damage. Bupropion administration in the form of hydrogel films is a potentially useful alternative in the treatment of smoking.

A bupropiona é um antidepressivo utilizado no tratamento do tabagismo. O objetivo deste trabalho foi a preparação de filmes hidrogelatinosos de liberação controlada para administração bucal de bupropiona. Os filmes foram preparados utilizando carboximetilcelulose sódica ultrapurificada, hidroxipropilmetilcelulose K4M e quitosana de média viscosidade. As características físico-químicas dos filmes foram avaliadas por microscopia eletrônica de varredura, teor de bupropiona, resistência mecânica (perfuração, relaxação, resiliência e tração) e citotoxicidade. Os resultados mostraram que os filmes em bicamada apresentaram teor de bupropiona de 121 mg por 9 cm2 de filme e que a bupropiona modifica a resistência mecânica dos filmes, sem, no entanto, inviabilizar o uso desta forma farmacêutica. Os estudos de citotoxicidade mostraram que as formulações dos filmes contendo bupropiona não causam dano celular. Este estudo mostrou que a bupropiona veiculada na forma de filme hidrogelatinoso pode ser uma alternativa útil no tratamento do tabagismo.

Development and optimization of self microemulsifying drug delivery of domperidone

The present investigation is aimed to develop self-microemulsifying drug delivery system (SMEDDS) to improve the in vitro dissolution of a BCS (Biopharmaceutical Classification System) class II anti emetic agent, domperidone. Solubility study was performed to identify the ingredients showing highest solubility of domperidone. The ternary phase diagrams were plotted for selected components to identify the area of microemulsion existence. D-optimal mixture experimental design was applied to optimize a liquid SMEDDS using formulation variables; the oil phase X1 (Oleic acid), the surfactant X2 (Labrasol) and the co-surfactant X3 (Transcutol HP). The liquid SMEDDS were evaluated for droplet size, emulsification time, % transmittance and drug release. Stability study was performed at 40 °C/75% RH. Liquid formulation was solidified by adsorption on carrier Aerosil 300. Solid SMEDDS was evaluated and compared with liquid SMEDDS and marketed formulation. Oleic acid was selected as oil, Labrasol as surfactant and Transcutol HP as co-surfactant for formulation of SMEDDS. The optimized batch showed best results in terms of smaller droplet size (<170 nm), emulsification time (<40 s) and drug release (>85% in 15 min) and was stable for 3 months. Solid SMEDDS containing Aerosil 300 showed good flow properties and uniform drug content. XRPD study revealed that the crystalline drug was converted to amorphous form in solid SMEDDS. The rate and extent of drug dissolution from solid SMEDDS was significantly higher than pure drug and commercial tablet formulation. The results demonstrate the potential of SMEDDS as a means of improving solubility, dissolution and hence the bioavailability.

O presente estudo teve como objetivo desenvolver sistemas de liberação auto-microemulsificantes (Self-Microemulsifying Drug Delivery System - SMEDDS) de domperidona, agente antiemético, classe II, segundo o sistema de classificação Biofarmacêutica, para melhorar sua dissolução in vitro. Estudo foi realizado para identificar os componentes que revelaram maior solubilidade da domperidona. Determinaram-se os diagramas de fase ternários para esses componentes selecionados tendo em vista a identificação da região de formação da microemulsão. O planejamento experimental foi empregado para otimizar os SMEDDS líquidos, utilizando as seguintes variáveis de formulação: a fase oleosa X1 (ácido oleico), o agente tensoativo X2 (Labrasol) e co-tensoativo X3 (Transcutol HP). Os SMEDDS líquidos foram avaliados quanto às seguintes características: tamanho da gota, tempo de emulsificação,% de transmitância e liberação do fármaco. O estudo de estabilidade foi realizado a 40 °C/75% de umidade relativa. A formulação foi convertida em forma sólida por sua adsorção em Aerosil 300. Os SMEDDS sólidos foram avaliados e comparados com SMEDDS líquidos e a formulação comercializada. O ácido oléico foi selecionado para a fase oleosa, Labrasol como agente tensoativo e Transcutol como co-tensoativo para a formulação de SMEDDS. O lote otimizado mostrou os melhores resultados: menor tamanho de gota (<170 nm), menor tempo de emulsificação (<40 segundos), e de liberação do fármaco (> 85% em 15 min). Além disso, a formulação otimizada manteve-se estável no período de 3 meses. Os SMEDDS sólidos contendo Aerosil 300 apresentaram boas propriedades de fluxo e uniformidade de conteúdo do fármaco. O estudo de difração de raios-X revelou que o fármaco cristalino foi convertido para a forma amorfa, nos SMEDDS sólidos. A velocidade de dissolução do fármaco a partir dos SMEDDS sólidos foi significativamente maior, quando comparado ao fármaco livre e à formulação de comprimidos comercial. Os resultados demonstram o potencial dos SMEDDS como meio para melhorar a solubilidade, a dissolução e, consequentemente, a biodisponibilidade da domperidona.

pH-sensitive polyvinylpyrrolidone-acrylic acid hydrogels: Impact of material parameters on swelling and drug release

In this study, we fabricated pH-sensitive polyvinylpyrrolidone/acrylic acid (PVP/AA) hydrogels by a free-radical polymerisation method with variation in the content of monomer, polymer and cross-linking agent. Swelling was performed in USP phosphate buffer solutions of pH 1.2, 5.5, 6.5 and 7.5 with constant ionic strength. Network structure was evaluated by different parameters and FTIR confirmed the formation of cross-linked hydrogels. X-ray crystallography showed molecular dispersion of tramadol HCl. A drug release study was carried out in phosphate buffer solutions of pH 1.2, 5.5 and 7.5 for selected samples. It was observed that swelling and drug release from hydrogels can be modified by changing composition and degree of cross-linking of the hydrogels under investigation. Swelling coefficient was high at higher pH values except for the one containing high PVP content. Drug release increased by increasing the pH of the medium and AA contents in hydrogels while increasing the concentration of cross-linking agent had the opposite effect. Analysis of the drug release mechanism revealed non-Fickian transport of tramadol from the hydrogels.

Nesse estudo, preparamos hidrogéis de polivinilpirrolidona/ácido acrílico(PVP/AA), sensíveis ao pH, por meio de método de polimerização de radical livre, com variações no conteúdo de monômero, de polímero e de agente de ligação cruzada. O inchamento foi realizado em soluções tampão fosfato USP pH 1,2, 5,5, 6,5 e 7,5, com força iônica constante. A estrutura reticular foi avaliada por diferentes parâmetros e o FTIR confirmou a formação de hidrogéis de ligação cruzada. A cristalografia de raios X mostrou dispersão molecular do cloridrato de tramadol. Realizou-se estudo de liberação do fármaco em soluções tampão fosfato pH 1,2, 5,5 e 7,5 para amostras selecionadas. Observou-se que o inchamento e a liberação do fármaco dos hidrogéis podem ser modificados mudando-se a composição e o grau de ligação cruzada dos hidrogéis em estudo. O coeficiente de inchamento foi alto em pH mais altos, exceto para um deles com alto conteúdo de PVP. A liberação do fármaco aumentou com o aumento do pH do meio e do conteúdo em AA nos hidrogéis, enquanto que o aumento na concentração do agente de ligação cruzada apresentou efeito oposto. A análise do mecanismo de liberação do fármaco revelou transporte não Fickiano do tramadol dos hidrogéis.

Design and optimization of self-microemulsifying drug delivery system (SMEDDS) of felodipine for chronotherapeutic application

The objective of this research work was to design, develop and optimize the self micro-emulsifying drug delivery system (SMEDDS) of Felodipine (FL) filled in hard gelatine capsule coated with polymer in order to achieve rapid drug release after a desired time lag in the management of hypertension. Microemulsion is composed of a FL, Lauroglycol FCC, Transcutol P and Cremophor EL. The optimum surfactant to co-surfactant ratio was found to be 2:1. The resultant microemulsions have a particle size in the range of 65-85 nm and zeta potential value of -13.71 mV. FL release was adequately adjusted by using pH independent polymer i.e. ethyl cellulose along with dibutyl phthalate as plasticizer. Influence of formulation variables like viscosity of polymer, type of plasticizer and percent coating weight gain was investigated to characterize the time lag. The developed formulation of FL SMEDDS capsules coated with ethyl cellulose showed time lag of 5-7 h which is desirable for chronotherapeutic application.

O objetivo desse trabalho de pesquisa foi planejar, desenvolver e otimizar sistema de liberação de fármaco auto-microemulsificante(SMEDDS) de felodipino (FL) em cápsulas de gelatina dura revestidas com polímero, a fim de obter liberação rápida após tempo desejado no manejo da hipertensão. A microemulsão é composta de FL, lauroglilcol FCC, Transcutol P e Cremophor EL. A proporção ótima de tensoativo e de co-tensoativo foi de 2:1. As microemulsões resultantes têm tamanho de partícula na faixa de 65-85 nm com potencial zeta de -13,71 mV. A liberação de FL foi ajustada adequadamente, utilizando-se polímero independente de pH, como etilcelulose com ftalato de dibutila como plastificante. A influência das variáveis da formulação, como viscosidade do polímero, tipo de plastificante e ganho percentual de peso do revestimento foi investigada para caracterizar o intervalo de tempo de liberação. A formulação de cápsulas de FL SMEDDS revestidas com etilcelulose mostrou intervalo de tempo de liberação de 5 a 7 horas, o que é desejável para uma aplicação cronoterapêutica.

Desarrollo de un nanosistema para la liberación de fármacos intravítreo / Development of intravitreal nanosistema for drugs release

La inyección intravítrea ha sido la vía de administración más eficaz para el tratamiento de enfermedades vitreorretinianas. Su práctica continua, no es agradable para los pacientes y a su vez podría causar complicaciones indeseadas. El presente trabajo tuvo como objetivo desarrollar un nanosistema de liberación polímero-terapéutico (conjugado)/nanopartícula, utilizando Dextrano y Quitosano como polímeros transportadores biodegradables, hidrosolubles y compatibles a nivel ocular así como Hemisuccinato de Metilprednisolona como fármaco modelo. Primeramente, el fármaco fue capaz de unirse covalentemente a dos Dextranos de pesos moleculares 10 y 70 kDa. En función del contenido del componente activo y perfil de liberación, se seleccionó el Hemisuccinato de Metilprednisolona-Dextrano 10 kDa para elaborar las nanopartículas de Quitosano por el método de gelificación iónica empleando tripolifosfato sódico como agente entrecruzante. Por último, las nanopartículas fueron cubiertas con lactosa aplicando el secado por atomización. Se evaluó morfología, distribución de tamaño de las partículas, carga superficial, contenido y eficacia de captura del fármaco. Las partículas esféricas presentaron superficies lisas y uniformes. El pH tuvo influencia en el tamaño de las partículas observándose una distribución bimodal a pHs ≈ pKa del Quitosano y unimodal con un rango entre 130 - 170 nm a pHs < pKa. La variación de los potenciales Zeta entre los compuestos involucrados en la reacción, indicaron la posible ocurrencia de la misma. Al comparar la liberación del conjugado con las Nanopartículas a pH fisiológico, se observó que la encapsulación retrasó la liberación del fármaco alrededor de un 50%. Las nanopartículas recubiertas formaron micropartículas de 1.780 ± 0,5 nm, lo que favoreció su dispersibilidad en agua. Este nuevo nanosistema, evidenció su posible potencial en el desarrollo de formulaciones de liberación intravítrea, que reduzca la frecuencia de administración, ofreciendo una excelente alternativa que proporcione un mayor grado de satisfacción y mejore la calidad de vida del paciente.