Intoxicación por leche magnesia en una paciente pediátrica con constipación crónica: a propósito de un caso / Milk of magnesia intoxication in a pediatric patient with chronic constipation: case report

Resumen Las intoxicaciones accidentales siguen siendo un problema importante que genera gran cantidad de casos de autopsia médico legal, sobre todo cuando ocurren en pacientes pediátricos donde se deben descartar otras causas de muerte y que no se trate de un homicidio. La intoxicación con leche magnesia es un diagnóstico poco frecuente por lo que se hace necesario conocer sus características, evolución y las alteraciones metabólicas por las que se produce la muerte. La hipermagnesemia constituye una condición iatrogénica, generalmente secundaria a la administración de fármacos que contienen magnesio, entre ellos laxantes en pacientes con estreñimiento crónico, en muchas ocasiones sin supervisión médica; que puede producir depresión respiratoria, hipotensión, paro cardiorrespiratorio y la muerte. El diagnóstico de intoxicación con leche magnesia es clínico y se correlaciona con la concentración de magnesio detectada en análisis de muestras de sangre. A continuación se presenta un caso de intoxicación por leche magnesia en una paciente en edad pediátrica con antecedente de parálisis cerebral infantil y constipación crónica que desarrolló una hipermagnesemia posterior a la administración de dicho laxante por parte de sus padres.

Abstract Accidental intoxications continue to be an important problem in the Forensic Pathology field, mostly when they occur in pediatric patients where it is necessary to dismiss other causes of death and to rule out homicide. Milk of magnesia intoxication is a rare diagnosis, therefore it is important to know it´s characteristics, evolution and the metabolic disorders that lead to death. Hypermagnesemia is an iatrogenic condition, usually caused by the administration of medications that contain magnesium, such as laxatives in patients with chronic constipation, without medical supervision; that can lead to respiratory distress, hypotension, cardiac arrest and death. The diagnosis of milk of magnesia intoxication is clinical and can be correlated to the levels of magnesium found in blood sample analysis. We present a case of milk of magnesia intoxication in a 6-year-old girl with cerebral palsy and chronic constipation that was given laxatives by her parents and developed a fatal hypermagnesemia.

A Randomized Double-blind Placebo-controlled Trial on the Effect of Magnesium Oxide in Patients With Chronic Constipation

BACKGROUND/AIMS: Magnesium oxide (MgO) has been frequently used as a treatment for chronic constipation (CC) since the 1980s in Japan. The aim of this study is to evaluate its therapeutic effects of MgO in Japanese CC patients. METHODS: We conducted a randomized, double-blind placebo-controlled study. Thirty-four female patients with mild to moderate constipation were randomly assigned to either placebo (n = 17) or MgO group (n = 17) 0.5 g × 3/day for 28 days. Primary endpoint was overall improvement over the 4-week study period. Secondary endpoints were changes from baseline in spontaneous bowel movement (SBM), response rates of complete spontaneous bowel movement (CSBM), stool form, colonic transit time (CTT), abdominal symptom, and quality of life. RESULTS: One patient failed to complete the medication regimen and was omitted from analysis: data from 16 placebo and 17 MgO patients were analyzed. The primary endpoint was met by 25.0% of placebo vs 70.6% of MgO group (P = 0.015). MgO significantly improved SBM changes compared to placebo (P = 0.002). However, MgO did not significantly improved response rates of CSBM compared to placebo (P = 0.76). In addition, MgO significantly improved Bristol stool form scale changes (P < 0.001) and significantly improved CTT compared to the placebo group (P < 0.001). MgO significantly improved the Japanese version of the patient assessment of constipation quality of life (P = 0.003). CONCLUSION: Our placebo-controlled study demonstrated that MgO was effective treatment for improving defecation status and shortened CTT in Japanese CC patients with mild to moderate symptoms.

Study on friction and wear properties of dental zirconia ceramics processed by microwave and conventional sintering methods / 华西口腔医学杂志

<p><b>OBJECTIVE</b>This study evaluated the wear of an antagonist and friction and wear properties of dental zirconia ceramic that was subjected to microwave and conventional sintering methods.</p><p><b>METHODS</b>Ten specimens were fabricated from Lava brand zirconia and randomly assigned to microwave and conventional sintering groups. A profile tester for surface roughness was used to measure roughness of the specimens. Wear test was performed, and steatite ceramic was used as antagonist. Friction coefficient curves were recorded, and wear volume were calculated. Finally, optical microscope was used to observe the surface morphology of zirconia and steatite ceramics. Field emission scanning electron microscopy was used to observe the microstructure of zirconia.</p><p><b>RESULTS</b>Wear volumes of microwave and conventionally sintered zirconia were (6.940±1.382)×10⁻², (7.952±1.815) ×10⁻² mm³, respectively. Moreover, wear volumes of antagonist after sintering by the considered methods were (14.189±4.745)×10⁻², (15.813±3.481)×10⁻² mm³, correspondingly. Statistically significant difference was not observed in the wear resistance of zirconia and wear volume of steatite ceramic upon exposure to two kinds of sintering methods. Optical microscopy showed that ploughed surfaces were apparent in zirconia. The wear surface of steatite ceramic against had craze, accompanied by plough. Scanning electron microscopy showed that zirconia was sintered compactly when subjected to both conventional sintering and microwave methods, whereas grains of zirconia sintered by microwave alone were smaller and more uniform.</p><p><b>CONCLUSIONS</b>Two kinds of sintering methods are successfully used to produce dental zirconia ceramics with similar friction and wear properties.
.</p>

[Comparison of antibacterial effects of nanoparticles of magnesium oxide and silicon oxide on methicillin resistant bacteria]

.Background and Aim: Considering bacterial resistance to common antibiotics and the need for new drugs, use of medicinal products manufactured by nano-technology, can be effective in the prevention and treatment of bacterial infections. In this study, we evaluated the sensitivity of Staphylococcus aureus and Salmonella to nanoparticles of magnesium oxide and silicon oxide in vitro

Methods: Staphylococcus intermedius and Methicillin-resistant Staphylococcus aureus and Salmonella typhimurium, Salmonella abourtus were cultured in Mueller Hinton Broth medium. Then different concentrations of the nanoparticles of magnesium oxide and silicon oxide were added to the culture medium. After 24 hours of incubation we measured optical density [OD] by means of ELISA reader. Multi-well plate was used as controls. Using SPSS software data were analyzed by ANOVA and LSD post hock test

Results: Silicon nanoparticles prevented growth of Staphylococcus intermedious, Staphylococcus aureus, Salmonella typhimurium and Salmonella abortus [p<0.0001] in a dose dependent way, but showed no antibacterial effect on Salmonella typhi. Also nanoparticles of magnesium oxide showed antimicrobial effect on the above-mentioned bacteria in a dose-dependent manner [p<0.000l]

Conclusion: Silicon oxide and magnesium oxide nanoparticles can be used and evaluated as antibacterial drugs in experimental or clinical infections

Biological and mechanical properties of an experimental glass-ionomer cement modified by partial replacement of CaO with MgO or ZnO

AbstractSome weaknesses of conventional glass ionomer cement (GIC) as dental materials, for instance the lack of bioactive potential and poor mechanical properties, remain unsolved.Objective The purpose of this study was to investigate the effects of the partial replacement of CaO with MgO or ZnO on the mechanical and biological properties of the experimental glass ionomer cements.Material and Methods Calcium fluoro-alumino-silicate glass was prepared for an experimental glass ionomer cement by melt quenching technique. The glass composition was modified by partial replacement (10 mol%) of CaO with MgO or ZnO. Net setting time, compressive and flexural properties, and in vitrorat dental pulp stem cells (rDPSCs) viability were examined for the prepared GICs and compared to a commercial GIC.Results The experimental GICs set more slowly than the commercial product, but their extended setting times are still within the maximum limit (8 min) specified in ISO 9917-1. Compressive strength of the experimental GIC was not increased by the partial substitution of CaO with either MgO or ZnO, but was comparable to the commercial control. For flexural properties, although there was no significance between the base and the modified glass, all prepared GICs marked a statistically higher flexural strength (p<0.05) and comparable modulus to control. The modified cements showed increased cell viability for rDPSCs.Conclusions The experimental GICs modified with MgO or ZnO can be considered bioactive dental materials.

Push-out bond strength of fiber posts to root dentin using glass ionomer and resin modified glass ionomer cements

OBJECTIVE: The purpose of this study was to assess the push-out bond strength of glass fiber posts to root dentin after cementation with glass ionomer (GICs) and resinmodified glass ionomer cements (RMGICs). MATERIAL AND METHODS: Fifty human maxillary canines were transversally sectioned at 15 mm from the apex. Canals were prepared with a step back technique until the application of a #55 K-file and filled. Post spaces were prepared and specimens were divided into five groups according to the cement used for post cementation: Luting & Lining Cement; Fuji II LC Improved; RelyX Luting; Ketac Cem; and Ionoseal. After cementation of the glass fiber posts, all roots were stored at 100% humidity until testing. For push-out test, 1-mm thick slices were produced. The push-out test was performed in a universal testing machine at a crosshead speed of 0.5 mm/minute and the values (MPa) were analyzed by Kolmogorov-Smirnov and Levene's tests and by two-way ANOVA and Tukey's post hoc test at a significance level of 5%. RESULTS: Fiber posts cemented using Luting & Lining Cement, Fuji II LC Improved, and Ketac Cem presented the highest bond strength to root dentin, followed by RelyX Luting. Ionoseal presented the lowest bond strength values (P>0.05). The post level did not influence the bond strength of fiber posts to root dentin (P=0.148). The major cause of failure was cohesive at the cement for all GICs and RMGICs. CONCLUSIONS: Except for Ionoseal, all cements provided satisfactory bond strength values. .

The influence of protective varnish on the integrity of orthodontic cements

OBJECTIVE: The aim of the present study was to assess the influence of saliva contamination over the structural strength and integrity of conventional glass-ionomer cements used for cementing orthodontic bands in the absence and presence of a surface-protecting varnish. METHOD: 48 samples were prepared by inserting 3 types of glass-ionomer cements into standardized metallic matrixes of 10 mm of diameter and 2 mm of depth. The cements used were: Meron (VOCO), Ketac-Cem (3M ESPE) and Vidrion C (DFL), all of which comprised groups A, B and C, respectively. Subgroups A1, B1 and C1 comprised samples with no surface protection, whereas subgroups A2, B2 and C2 comprised samples of which surface was coated with Cavitine varnish (SS White), after cement manipulation and application, in order to protect the cement applied. All samples were stored in artificial saliva for 24 hours at 37ºC. A Vickers diamond micro-durometer was used to produce indentations on the non-treated group (non-varnished) and the treated group (varnished). RESULTS: Varnished materials had significantly higher microhardness values in comparison to non-varnished materials. Ketac-Cem had the highest microhardness value among the varnished materials. CONCLUSION: Varnish application is necessary to preserve the cement and avoid enamel decalcification. Glass-ionomer cements should be protected in order to fully keep their properties, thus, contributing to dental health during orthodontic treatment.

OBJETIVO: avaliar a influência da contaminação salivar na resistência estrutural e integridade de cimentos de ionômero de vidro convencionais utilizados para cimentação de bandas ortodônticas na ausência e na presença de um verniz protetor de superfície. MÉTODOS: quarenta e oito corpos de prova foram confeccionados a partir de três cimentos ortodônticos, com auxílio de matrizes metálicas padronizadas com 10mm de diâmetro e 2mm de altura. Os cimentos utilizados foram: Meron (Voco), Ketac-Cem (3M ESPE) e Vidrion C (DFL), compondo os grupos A, B e C, respectivamente. Metade dessas amostras não recebeu nenhum tipo de proteção superficial, constituindo os subgrupos A1, B1 e C1, enquanto, os subgrupos A2, B2 e C2 tiveram suas superfícies isoladas com verniz Cavitine (SS White) após manipulação e aplicação do cimento, com intuito de proteger a superfície do cimento. As amostras foram armazenadas em saliva artificial por 24 horas a 37ºC. Foi realizado um ensaio de microdureza (Vickers) para avaliação da dureza de superfície do grupo não-tratado (sem isolamento) e do grupo tratado (agente protetor). RESULTADOS: os materiais previamente isolados com o verniz obtiveram valores de microdureza significativamente maiores que os não-isolados. O cimento Ketac-Cem apresentou, estatisticamente, a maior microdureza entre os materiais protegidos. CONCLUSÃO: o isolamento com verniz mostrou-se necessário para preservação do cimento e, consequentemente, de sua capacidade de evitar possíveis desmineralizações dentárias. Os cimentos de ionômero de vidro devem ser protegidos para manutenção de sua integridade, contribuindo para saúde dental durante o tratamento ortodôntico.

Evaluation of mechanical properties of five cements for orthodontic band cementation

The aim of this in vitro study was to compare the flexural, compressive and diametral tensile strengths of five cements used in orthodontics for band cementation. Twelve specimens of each cement were tested: 1 - GC Fuji Ortho Band (FJ), GC America Inc.; 2 - Meron (MR), Voco; 3 - Multi-Cure Glass Ionomer Band Cement (MC), 3M Unitek; 4 - Band-Lok (BL), Reliance Orthodontic Products; and 5 - Ketac Cem (KC), 3M ESPE. The results (mean) for diametral tensile strength were: 10.51 MPa (FJ), 9.60 MPa (MR), 20.04 MPa (MC), 42.80 MPa (BL), and 4.08 MPa (KC). The results for compressive strength were (in the same order): 64.50 MPa, 77.71 MPa, 94.21 MPa, 193.88 MPa, and 81.93 MPa. The results for flexural strength were (in the same order): 20.72 MPa, 25.84 MPa, 53.41 MPa, 137.41 MPa, and 20.50 MPa. The statistical analysis was performed by two-way ANOVA and Tukey tests with p-value £ 0.05. In terms of diametral tensile strength, BL showed the highest strength statistically, and MC, the second highest. In terms of compressive tensile strength, BL showed the highest strength statistically, and FJ did not attain the minimum recommended strength. In terms of flexural tensile strength, BL cement was superior to MC, and MR, FJ and KC were equivalent and inferior to BL and MC.

Results of urinary dissolution therapy for radiolucent calculi

Purpose In this paper we present our experience with dissolution therapy of radiolucent calculi. Materials and Methods This was a retrospective analysis of patients who were offered urinary dissolution therapy between January 2010 and June 2011. Patients were treated with tablets containing potassium citrate and magnesium oxide. Partial dissolution was defined as at least a 50% reduction in stone size. Patients with complete or partial dissolution were classified in the successful dissolution group. Patients with no change, inadequate reduction, increase in stone size and those unable to tolerate alkali therapy were classified as failures. Patient sex, stenting before alkalinization, stone size, urine pH at presentation and serum uric acid levels were analyzed using Fisher t-test for an association with successful dissolution. Results Out of 67, 48 patients reported for follow up. 10 (15%) had complete dissolution and 13 (19%) had partial dissolution. Alkalinization was unsuccessful in achieving dissolution in 25 (37%). Stenting before alkalinization, patient weight (< 60 vs. > 75kg) and serum uric acid levels (≤ 6 vs. > 6) were the only factors to significantly affected dissolution rates (p = 0.039, p 0.035, p 0.01 respectively). CONCLUSIONS A policy of offering dissolution therapy to patients with radiolucent calculi had a successful outcome in 34% of patients. .

Gitelman syndrome combined with complete growth hormone deficiency

Gitelman syndrome is a rare autosomal recessive hereditary salt-losing tubulopathy, that manifests as hypokalemic metabolic alkalosis, hypomagnesemia, and hypocalciuria. It is caused by mutations in the solute carrier family 12(sodium/chloride transporters), member 3 (SLC12A3) gene encoding the thiazide-sensitive sodium chloride cotransporter channel (NCCT) in the distal convoluted tubule of the kidney. It is associated with muscle weakness, cramps, tetany, vomiting, diarrhea, abdominal pain, and growth retardation. The incidence of growth retardation, the exact cause of which is unknown, is lower than that of Bartter syndrome. Herein, we discuss the case of an overweight 12.9-year-old girl of short stature presenting with hypokalemic metabolic alkalosis. The patient, on the basis of detection of a heterozygous mutation in the SLC12A3 gene and poor growth hormone (GH) responses in two provocative tests, was diagnosed with Gitelman syndrome combined with complete GH deficiency. GH treatment accompanied by magnesium oxide and potassium replacement was associated with a good clinical response.

Severe hypermagnesemia presenting with abnormal electrocardiographic findings similar to those of hyperkalemia in a child undergoing peritoneal dialysis / 소아과

In this report, we present a pediatric case of severe symptomatic hypermagnesemia resulting from the use of magnesium oxide as a laxative in a child undergoing continuous cyclic peritoneal dialysis for end-stage renal disease. The patient showed abnormal electrocardiography (ECG) findings, such as tall T waves, a widened QRS complex, and irregular conduction, which were initially misdiagnosed as hyperkalemia; later, the correct diagnosis of hypermagnesemia was obtained. Emergent hemodialysis successfully returned the serum magnesium concentration to normal without complications. When abnormal ECG changes are detected in patients with renal failure, hypermagnesemia should be considered.

Effect of investment type and mold temperature on casting accuracy and titanium-ceramic bond

This study evaluated the casting accuracy of crown margins and metal-ceramic shear bond strength (SBS) of pure titanium injected into casting molds made using 2 investment types at 3 mold temperatures. Sixty crown (30-degree beveled finish line) and 60 cylinder (5 mm diameter × 8 mm high) patterns were divided into 6 groups (n=10), and cast using a phosphate-bonded investment (P) and a magnesium oxide-bonded investment (U), at 400°C (groups P400 and U400), 550°C (groups P550 and U550) and 700°C (groups P700 and U700) mold temperatures. Crown margins were recorded in impression material, the degree of marginal rounding was measured and margin length deficiencies (µm) were calculated. Titanium-ceramic specimens were prepared using Triceram ceramic (2 mm high) and SBS was tested. Failure modes were assessed by optical microscopy. Data were subjected to two-way ANOVA and Tukey's HSD test (α=0.05). For casting accuracy, expressed by marginal deficiency (µm), investment U provided more accurate results (64 ± 11) than P (81 ± 23) (p<0.001). The increase in temperature resulted in different effects for the tested investments (p<0.001), as it provided better casting accuracy for U700 (55 ± 7) and worse for P700 (109 ± 18). Casting accuracy at 700°C (82 ± 31) was significantly different from 400°C (69 ± 9) and 550°C (68 ± 9) (p<0.05). For SBS, there was no significant differences among the groups for factors investment (p=0.062) and temperature (p=0.224), or for their interaction (p=0.149). Investment U provided better casting accuracy than investment P. The SBS was similar for all combinations of investments and temperatures.

O objetivo neste estudo foi avaliar a precisão da fundição de margens de coroas e a resistência de união metalocerâmica do titânio puro injetado em moldes de fundição feitos com 2 tipos de revestimentos em 3 diferentes temperaturas. Sessenta copings (com linha de término em bisel de 30°) e 60 padrões em forma de cilindros (diâmetro de 5 mm e altura de 8 mm) foram separados em 6 grupos (n=10) e fundidos usando revestimento aglutinado por fosfato (P) ou revestimento aglutinado por óxido de magnésio, nas temperaturas finais do molde: 400° (grupos P400 e U400), 550° (grupos P550 e U550) e 700° (grupos P700 e U700). As margens dos copings foram registradas em material de moldagem, o grau de arredondamento marginal foi medido e as deficiências marginais (µm) foram calculadas. Os espécimes metalocerâmicos foram confeccionados com cerâmica Triceram (altura de 2 mm) e submetidos aos ensaios de resistência de união por cisalhamento. Os tipos de fratura foram avaliados em microscópio óptico. Os dados foram submetidos à ANOVA e teste de Tukey (α=0,05). Para precisão de fundição (µm), o revestimento U promoveu melhores resultados (64 ± 11) que o P (81 ± 23) (p<0,001); o aumento da temperatura do molde resultou em efeitos diferentes para os revestimentos avaliados (p<0,001), considerando que promoveu melhor precisão de fundição para U700 (55 ± 7) e pior para P700 (109 ± 18). Os valores promovidos por 700°C (82 ± 31) foram significantemente diferentes de 400°C (69 ± 9) e 550°C (68 ± 9) (p<0,05). Para resistência de união ao cisalhamento, a ANOVA não demonstrou diferença significante para os fatores revestimento (p=0,062) e temperatura (p=0,224), nem para a interação deles (p=0,149). O revestimento U promoveu melhor precisão de fundição que o revestimento P. A resistência de união ao cisalhamento foi similar para todas as combinações de revestimentos e temperaturas do molde.

Minerals consumption by Acetobacter xylinum on cultivation medium on coconut water

The objective of this work is to verifying the consume of the minerals K, Na, Fe, Mg, P, S-SO4-2,B,N Total Kjedahl (NTK), NO3--N, and NH4+-N in the production of bacterial cellulose by Acetobacter xylinum, according to the medium and the manner of cultivation. The fermentative process was in ripe and green coconut water. K and Na were determined by flame emission photometry, Mg and Fe by atomic absorption spectrophotometry, P by molecular absorption spectrophotometry, S-SO4-2 by barium sulphate turbidimetry, B by Azomethin-H method, NTK by Kjeldahl method, N-NO3-and N-NH4+ by vapor distillation with magnesium oxide and Devarda's alloy, respectively. In Fermentation of ripe coconut water there were higher consumption of K (69%), Fe (84,3%), P (97,4%), S-SO2-2 (64,9%), B (56,1%), N-NO3 (94,7%) and N-NH4+ (95,2%), whereas coconut water of green fruit the most consumed ions were Na (94,5%), Mg (67,7%) and NTK (56,6%). The cultivation under agitation showed higher mineral consumption. The higher bacterial cellulose production, 6 g.L-1, was verified in the coconut water fermentative in ripe fruit, added KH2PO4, FeSO4 and NaH2PO4 kept under agitation.

Adsorptive removal of ampicillin from aqueous solution by using magnesium oxide

In this research the effect of various experimental factors on adsorption of ampicillin onto magnesium oxide as shaking tunes, adsorbent dosage, initial ampicillin concentraion and pH were studied at room temperture. The adsoprtion data was fitted to the Freundlish isotherm than Langumair isotherm and the corresponding parameters were calculated. Three kinetic models, namely pseudo first order, pseudo second order and intra-particle diffusion models were selected to analyse the adsorption process. The results indicated that the adsorption followed a pseudo second order and confirms that adsorption of ampicillin on magnesium oxide was a multistep process

The effectiveness of magnesium oxide combined with tissue conditioners in inhibiting the growth of Candida albicans: An in vitro study.

Context : The presence of Candida albicans on the fitting surface of the denture is a major causative factor in denture stomatits. A treatment method is by combining tissue conditioner and antifungal agents. Aims : The main objective of this study is to test the efficacy of magnesium oxide combined with two tissue conditioners (Viscogel and GC Soft), in inhibiting the growth of Candida albicans. Settings and Design : Microbiological study was done in the Department of Microbiology, K S Hegde Medical Academy, Nitte University, Mangalore. Materials and Methods : A total of 154 plates were prepared using Muller Hilton with Glucose and Methylene Blue dye medium and inoculated with 24-hr old standard Candida culture. Plates were divided into control and combination. Test discs with different concentrations of MgO were equidistantly placed in MgO Control, while sterile discs embedded with respective tissue conditioner were equidistantly placed in Viscogel and GC Soft controls. For combination groups, the tissue conditioners were mixed and the discs with MgO (1%, 3%, 5%, and 7%) were embedded in the mix. After 24 h of incubation, inhibition diameters were noted. Statistical Analysis Used : The data was analysed using Mann Whitney U Test, ANOVA, Tukey HSD test. Results : The inhibition effect of magnesium oxide 1% combined with tissue conditioners (VGC and GCC) is not significant in both the groups. The inhibition effect of MgO 5% and 7% combined with tissue conditioners (VGC and GCC) is very highly significant ( P < 0.001). Conclusions : Magnesium oxide in combination with tissue conditioners are effective against Candida albicans; GC soft with magnesium oxide showed a better result than Viscogel with magnesium oxide; Increasing the concentration of magnesium oxide increases the zone of inhibition of Candida albicans.

Effect of cement type and water storage time on the push-out bond strength of a glass fiber post

This study investigated the effects of the cement type and the water storage time on the push-out bond strength of a glass fiber post. Glass fiber posts (Fibrekor, Jeneric Pentron) were luted to post spaces using a self-cured resin cement (C&B Cement [CB]), a glass ionomer cement (Ketac Cem [KC]) or a resin-modified glass ionomer cement (GC FujiCEM [FC]) according to the manufacturers’ instructions. For each luting agent, the specimens were exposed to one of the following water storage times (n=5): 1 day (T1), 7 days (T7), 90 days (T90) and 180 days (T180). Push-out tests were performed after the storage times. Control specimens were not exposed to water storage, but subjected to the push-out test 10 min after post cementation. Data (in MPa) were analyzed by Kruskal-Wallis and Dunn`s test (α=0.05). Cement type and water storage time had a significant effect (p<0.05) on the push-out bond strength. CB showed significantly higher values of retention (p<0.05) than KC and FC, irrespective of the water storage time. Water storage increased significantly the push-out bond strength in T7 and T90, regardless of the cement type (p<0.05). The results showed that fiber posts luted to post spaces with the self-cured resin cement exhibited the best bonding performance throughout the 180-day water storage period. All cements exhibited a tendency to increase the bond strength after 7 and 90 days of water storage, decreasing thereafter.

Este estudo investigou os efeitos do tipo de cimento e do tempo de armazenamento em água na resistência adesiva ao cisalhamento de pinos de fibra. Pinos de fibra de vidro (Fibrekor, JenericPentron) foram cimentados aos condutos radiculares usando o cimento resinoso autopolimerizável (C&B Cement [CB]), o cimento de ionômero de vidro (Ketac Cem [KC]) ou o cimento de ionômero de vidro modificado por resina (GC FujiCEM [FC]) de acordo com as instruções dos fabricantes. Para cada cimento, os espécimes foram expostos a um dos seguintes tempos de armazenamento em água (n=5): 1 dia (T1), 7 dias (T7), 90 dias (T90) e 180 dias (T180). Os testes de resistência adesiva ao cisalhamento foram realizados após os períodos de armazenamento. Os espécimes controles não foram expostos ao armazenamento em água, mas submetidos ao teste de resistência adesiva ao cisalhamento 10 min após a cimentação do pino. Os dados (MPa) foram analisados usando Kruskal-Wallis e teste de Dunn (α=0,05). O tipo de cimento e o tempo de armazenamento em água afetaram significantemente a resistência adesiva ao cisalhamento (p<0,05). CB apresentou valores de retenção significantemente superiores a KC e FC, independentemente do tempo de armazenamento em água. Esse, por sua vez, aumentou significantemente a resistência adesiva ao cisalhamento em T7 e T90, independentemente do tipo de cimento (p<0,05). Os resultados indicaram que os pinos de fibra cimentados aos condutos radiculares com o cimento resinoso autopolimerizável apresentou a melhor performance adesiva durante todo o período de armazenamento em água de 180 dias. Todos os cimentos apresentaram uma tendência a aumentar a resistência adesiva ao cisalhamento após 7 e 90 dias de armazenamento em água, diminuindo posteriormente.

Green heterogeneous catalysis: chitosan and nanoparticulated magnesium oxide as ecofriendly catalyses for michael addition

Heterogeneous ecofriendly base catalysis namely, chitosan and naoparticulated MgO are promising new catalysis in Michael addition that can efficiency replace homogeneous polluting catalysts. Aminopyrancarbonitriles, pyranopyrazole, thiazologyridines and chromenes can be obtained in ethanolic or methanolic chitosan or MgO in good yields

Mental Change, Cardiovascular Depression and QT Prolongation Caused by Severe Hypermagnesemia: A Case Report / 대한구급학회지

A 50-year-old woman was referred to our hospital for evaluation of mental change and general weakness accompanied by an irregular and weak pulse. She had previously been diagnosed with Bartter's syndrome and had taken potassium-sparing diuretics. She had developed constipation that had led to abdominal pain and had taken excessive magnesium oxide over a long time. On admission, she was lethargic. Her blood pressure (BP) was 130/74 mmHg, with a heart rate varying from 30 to 78 beats/min. An electrocardiogram (ECG) revealed several abnormalities, including first degree AV block, QT prolongation, sinus pause with a junctional rhythm, and paroxysmal tachycardia alternating with sinus pause. Her serum concentration of magnesium was markedly elevated to 16.19 mg/dl. Hemodialysis and a calcium gluconate infusion was attempted to reduce magnesium levels and to counteract the cardiovascular effect of magnesium. As magnesium levels declined, her general medical condition improved and her ECG changes were normalized. Severe hypermagnesemia should be suspected as the cause of mental change, cardiovascular dysfunction, and variable ECG changes.

Effect of Ag[2]O- and Mn[2]O[3]Doping of CuO/MgO-AI[2]O[3] on Its Surface and Catalytic Properties

Pure samples of CuO/MgO-Al[2]O[3] solids were prepared by wet impregnation method using a given weight of equimolar proportions of aluminum hydroxide and magnesium basic carbonate powders with calculated amounts of copper nitrate dissolved in the least amount of distilled water followed by drying and calcinations at 300 and 500°C. The doped samples were obtained by treating pure solids with a known weight of silver or manganese nitrate prior to impregnation with copper nitrate. The formulae of pure calcined solids were 0.05, 0.1 and 0.2 CuO/MgO-Al[2]O[3]. The dopant concentration was varied between 1-4 mol% Ag2[O] and 1-8 mol% Mn[2]O[3]. The results revealed that the specific surface areas of pure and doped solids decreased by increasing the calcination temperature from 300 to 500°C. The doping process resulted in a measurable increase in the BET-surface areas of all solids investigated. This process changed the catalytic activities of various solids in CO oxidation by O[2] and H[2]O[2] decomposition. Doping the solids investigated with both dopants brought about a considerable increase in the catalytic activity towards both H[2]O[2] decomposition and CO oxidation to an extent proportional to the amount of dopants added. The increase in the catalytic activity was, however, more pronounced for Ag[2]O-dopant. The increase in calcinations temperature from 300 to 500°C resulted in an increase in the catalytic activity of pure and doped solids. Activation energy calculations revealed that doping process did not modify the reaction mechanism of H[2]O[2] decomposition but rather changed the concentration of catalytically active sites without changing their energetic nature

Surface and catalytic properties of Mn2O3/MgO system doped with ZnO

The effects of calcination temperature and doping of Mn2O3/MgO system with ZnO on its surface and catalytic properties were investigated. The techniques employed were nitrogen adsorption at -196°C. XRD and H2O2 decomposition at 30-50°C. Pure and variously doped solids were prepared by wet impregnation method using manganese nitrate, magnesium basic carbonate and zinc nitrate. The prepared solids were calcined at 400, 600, 700, 900 and 1000°C. The amount of Mn2O3 was fixed at 20 mol% for all solids. The dopant concentration was changed between 0.75 and 3 mol% ZnO. The results revealed that manganese oxides interacted with magnesium oxide to yield crystallized magnesium manganates at temperature starting from 400°C. Pure and doped solids precalcined at 400°C consisted of MgO and MgMnO3 phases. The degree of crystallinity of the detected phases increased with increasing the calcination temperature to 600°C with detection of poorly crystalline Mn2O3. Furthermore, ZnO-doping of the system investigated followed by calcination at 400°C and 600°C resulted in decreasing the intensity of the diffraction lines with subsequent decrease the detected phases, in their crystallite size and increases their surface areas [SBET] up to a certain extent of dopant added. ZnO doping hinders the formation of MgMnO3 phase at 400 and 600°C. At 700°C, Mn2O3, Mg6MnO8 and Mg2MnO4 phases were detected. At 900 and 1000°C, only, well crystalline Mg6MnO8 and Mg2MnO4 phases were detected for all the solids. The doping process carried out at 400 and 600°C increased effectively the catalytic activity of the system under investigation reaching a maximum limit at 1.5 mol% ZnO. The increase in dopant concentration above this limit decreased the catalytic activity which remained greater than those measured for the pure solids calcined at the same temperatures. The presence of 1.5 mol ZnO brought about an increase of 191% and 144% of the catalytic activity of the solids calcined at 400 and 600°C, respectively. The doping process did not affect the activation energy values of the catalyzed reaction but rather increased the concentration of active sites involved in the catalyzed reaction without changing their energetic nature