Assembly and use of a low-cost paracentesis simulator for the teaching of puncture and drainage of ascites / Montagem e uso de simulador de paracentese de baixo custo - aplicabilidade no ensino de punção e drenagem de ascite

ABSTRACT Objectives: to describe the assembly of a low-cost paracentesis simulator and evaluate its effectiveness, acceptance and impact on the learning of medical students. Methodology: a paracentesis simulator was built using a mannequin and materials such as plastic bottles, Velcro, polyvinyl chloride sheets and silicone were used. A cross-sectional and experimental study was carried out with undergraduate medical students without previous practical experience with paracentesis, which sought to validate the model, evaluating its benefits in learning and obtaining technical skills. Results: after using the simulator there was an increase of 82.4% in the level of confidence in performing paracentesis in a patient, with 98% of respondents considering that the model fulfilled the simulator function with satisfaction, and 100% considering it useful as a teaching tool. Conclusion: the built simulator was effective as an educational resource, serving as an alternative to high-cost commercial models, allowing for greater accessibility in the use of this tool in medical education.

RESUMO Objetivos: descrever a montagem de simulador de paracentese de baixo custo e avaliar eficácia, aceitação e impacto no aprendizado de acadêmicos do curso de medicina. Método: um simulador de paracentese foi construído a partir de manequim e de materiais como garrafas plásticas, velcro, folhas de policloreto de vinila e silicone. Foi feito estudo transversal com estudantes da graduação do curso de medicina sem experiência real prévia com paracentese, que buscou validar o modelo, por meio da análise de benefícios no aprendizado e na obtenção de habilidades técnicas. Resultados: após o uso do simulador, observou-se aumento de 82,4% no nível de segurança na realização da paracentese em paciente, 98% dos pesquisados consideraram que o uso do modelo cumpriu com satisfação a função de simulador e 100% definiram-no útil como ferramenta de ensino. Conclusão: a montagem do simulador mostrou-se factível e eficaz como recurso educacional. Serviu como alternativa aos modelos comerciais de alto custo e permitiu maior acessibilidade do uso dessa ferramenta na educação médica.

Development and evaluation of a training model for paracentetic suprapubic cystostomy and catheterization

OBJECTIVES: Minimally invasive paracentetic suprapubic cystostomy is a technique that should be learned by all surgical trainees and residents. This study aimed to develop a self-made training model for paracentetic suprapubic cystostomy and placement of the suprapubic catheter and then to evaluate its effectiveness in training fourth-year medical students. METHODS: Medical students were divided into an experimental group receiving comprehensive training involving literature, video, and model use and a control group receiving all the same training protocols as the experimental group except without hands-on practice using the model. Each student's performance was video-recorded, followed by subjective and objective evaluations by urology experts and statistical analysis. RESULTS: All students completed the surgical procedures successfully. The experimental group's performance scores were significantly higher than those of the control group (median final performance scores of 91.0 vs. 86.8, respectively). Excellent scores were achieved by more students in the experimental group than in the control group (55% vs. 20%), and fewer poor scores were observed in the experimental group than in the control group (5% vs. 30%). CONCLUSIONS: Based on its cost-effectiveness, reusability, and training effectiveness, this paracentetic suprapubic cystostomy training model is able to achieve goals in teaching practice quickly and easily. Use of the model should be encouraged for training senior medical students and resident physicians who may be expected to perform emergent suprapubic catheter insertion at some time.

A antiga técnica em um novo estilo: desenvolvendo habilidades procedimentais em paracentese em simulador de baixo custo / The old one technique in a new style: developing procedural skills in paracentesis in a low cost simulator model

ABSTRACT BACKGROUND: Paracentesis is a routine medical procedure quite relevant in clinical practice. There are risks of complications related to paracentesis, so it is essential a proper trainee for the younger practicer. OBJECTIVE: The article describes the construction and the application of a low cost paracentesis simulator for undergraduate medical students and it also describes the perception of students about the simulator as well. METHODS: A low-cost model was developed by the Program of Tutorial Education for training medical students during three editions of an undergraduate theoretical-practical course of bedside invasive procedures. The authors constructed a model from very low-cost and easily accessible materials, such as commercial dummy plus wooden and plastic supports to represent the abdomen, synthetic leather fabric for the skin, upholstered sponge coated with plastic film to represent the abdominal wall and procedure gloves with water mixed with paint to simulate the ascitic fluid and other abdominal structures. One semi-structured form with quantitative and qualitative questions was applied for medical specialists and students in order to evaluate the paracentesis simulator. RESULTS: The paracentesis model has an initial cost of US$22.00 / R$70.00 for 30 simulations and US$16.00 / R$50.00 for every 30 additional simulations. It was tested by eight medical doctors, including clinical medicine, general surgeons and gastroenterologists, and all of them fully agreed that the procedure should be performed on the manikin before in the actual patient, and they all approved the model for undergraduate education. A total of 87 undergraduate medical students (56% male) individually performed the procedure in our simulator. Regarding the steps of the procedure, 80.5% identified the appropriate place for needle puncture and 75.9% proceeded with the Z or traction technique. An amount of 80.5% of the students were able to aspire the fluid and another 80.5% of students correctly performed the bandage at the end of the procedure. All the students fully agreed that simulated paracentesis training should be performed prior to performing the procedure on a real patient. CONCLUSION: The elaboration of a teaching model in paracentesis provided unique experience to authors and participants, allowing a visible correlation of the human anatomy with synthetic materials, deepening knowledge of this basic science and developing creative skills, which enhances clinical practice. There are no data on the use of paracentesis simulation models in Brazilian universities. However, the procedure is quite accomplished in health services and needs to be trained. The model described above was presented as qualified with low cost and easily reproducible.

RESUMO CONTEXTO: A paracentese é um procedimento médico de rotina bastante relevante na prática clínica. Devido à sua importância na assistência médica diária e seus riscos de complicações, o treino do procedimento é essencial em currículos médicos reconhecidos. OBJETIVO: Descrever a construção de um simulador de paracentese de baixo custo, destacando a percepção de estudantes sobre o seu uso para treinamento na graduação em Medicina. MÉTODOS: Um modelo de baixo custo foi desenvolvido pelo Programa de Educação Tutorial para treinamento de estudantes de Medicina durante três edições de um curso teórico-prático de procedimentos invasivos à beira do leito. Os autores construíram um modelo a partir de materiais comuns e de fácil acesso, como manequim comercial e suportes de madeira e plástico para representar o abdômen, tecido de couro sintético para a pele, esponja revestida com filme plástico para representar a parede abdominal e luvas de procedimento com água misturada com tinta para simular o líquido ascítico e outras estruturas abdominais. Para avaliar o modelo, aplicou-se um questionário semiestruturado com aspectos quantitativos e qualitativos para médicos especialistas e estudantes. RESULTADOS: O modelo para paracentese tem orçamento inicial de US$22.00 / R$70,00 para 30 simulações e US$16.00 / R$50,00 para cada 30 simulações adicionais. Foi testado por oito especialistas (clínico geral, cirurgião geral e gastroenterologista), dos quais quatro são gastroenterologistas, e todos concordaram plenamente que o procedimento deve ser realizado no manequim antes de ser feito no paciente real, e todos eles aprovaram o modelo para o ensino de graduação. Durante as edições do curso, um total de 87 estudantes de graduação em Medicina (56% homens) realizaram individualmente o procedimento. Em relação às etapas do procedimento, do total de alunos avaliados, 80,5% identificaram o local apropriado para a punção e 75,9% procederam com a técnica Z ou tração. Ao final, 80,5% dos alunos conseguiram aspirar ao conteúdo ascítico, com 80,5% realizando o curativo e finalizando o procedimento. Todos os alunos concordaram plenamente que o treinamento com paracentese simulada deve ser feito antes de se realizar o procedimento em um paciente real. CONCLUSÃO: A elaboração de um modelo de ensino em paracentese proporcionou experiência única a autores e participantes, permitindo uma visível correlação da anatomia humana com materiais sintéticos, aprofundando o conhecimento desta ciência básica e desenvolvendo habilidades criativas, o que potencializa a prática clínica. Não há dados sobre o uso de modelos de simulação de paracentese em universidades brasileiras. No entanto, o procedimento é bastante realizado nos serviços de saúde e precisa ser treinado. O modelo descrito acima foi apresentado como de qualidade, baixo custo e de fácil reprodutibilidade, sendo inédito no cenário da educação médica nacional, mostrando-se uma ferramenta complementar de ensino na graduação e preparando os alunos para o procedimento in vivo.

A knee model for arthrocentesis simulation.

OBJECTIVES: To produce a knee model for medical students and residents to practice knee aspiration and intra-articular injection. MATERIAL AND METHOD: The model was made of plastic, rubber and silicone that included the lower third of the femur, the upper third of the tibia and the patella. They were fixed on 2 plastic boxes in the anatomical position and the boxes were connected together with 2 small hinge joints. A rubber bag was made in the pattern of synovial space of the knee. Quadriceps, anterior muscles of the leg and patellar tendon were also presented. The model was covered with silicon sheet, representing the skin. Water was used to fill up the synovial bag to simulate joint aspiration via supero-lateral approach with the knee in extension. The model was appraised by 30 medical students, 26 orthopedic residents and 10 orthopedic staff in terms of size, anatomy, physical examination, feeling during aspiration, need of the model in education and commercial use. RESULTS: Most of the medical students, residents and staff (80-90%) were satisfied with the model and rated it as good to very good teaching media. However, the model should come out in different sizes and the synovial bag should be modified to improve the ballotment test. Mass production of the model should be done. CONCLUSION: The knee model is an acceptable teaching model for arthrocentesis simulation with affordable cost.