ABSTRACT
Abstract This work reports the study of the potential application of Zn/TiO2 catalysts, obtained by the sol-gel method, in processes of environmental decontamination through the reactions of photodegradation of textile dye, followed by electrospray mass spectrometry. The catalysts synthesis was performed according to a 2² factorial design with repetition at the central point. The characterization techniques used were: N2 adsorption measurements (BET method), scanning electron microscopy with energy dispersive X-ray (MEV/EDS), X-ray diffraction and point of zero charge (PZC). The photocatalytic tests were performed in batch in the presence of sunlight, and to evaluate the degradation kinetics study, a rapid direct injection electrospray mass spectrometry (DI-ESI-MS) method has been developed. By the photocatalytic tests, the calcination temperature of 400 °C has shown the best results of discoloration for the reactive Orange-122 dye (99.76%) in a reaction time of 2h. The discoloration kinetics were a pseudo-first order, and a statistical analysis was performed to investigate the effects of the variables and to optimize the conditions of discoloration to the dye. After the reactional time of 2 h, an ion of m/z 441.5 was detected by ESI-MS, indicating that the photocatalytic process was effective for the degradation of the dye to secondary compounds.
Subject(s)
Azo Compounds/toxicity , Biodegradation, Environmental , Decontamination/methods , Tandem Mass Spectrometry/methods , Environmental Restoration and Remediation/methods , Wastewater , Photochemistry , Textiles/toxicity , Microscopy, Electron, Scanning , Catalysis , Catalytic Domain , Spectrometry, Mass, Electrospray Ionization , Coloring Agents , Photobioreactors , Models, TheoreticalABSTRACT
Abstract Color removal from textile effluents was evaluated using a laboratory-combined process based on an upflow anaerobic sludge blanket (UASB) reactor followed by a shallow polishing pond (SPP). The anaerobic reactor was fed with a real textile effluent, diluted 10-times in a 350 mg/L solution of pre-treated residual yeast extract from a brewery industry as nutrient source. The parameters color, COD, N-NH3 and toxicity were monitored throughout 45 days of operation. According to the results, decolorization and COD removal were highest in the anaerobic step, whereas the effluent was polished in the SPP unit. The overall efficiency of the complete UASB-SPP system for COD and color were 88 and 62%, respectively. Moreover, the N-NH3 generated by the residual yeast extract ammonification was below 5 mg/L for the final effluent. Finally, no toxicity was detected after the treatment steps, as shown by the Vibrio fischeri microscale assay.