SAT: Sistematización Adhesiva Temporaria. Integración estético-oclusal predecible en rehabilitación conservadora. Informe de caso y revisión bibliográfica / TAS: Temporary Adhesive Systematization. Predictable aesthetic-occlusal integration in conservative rehabilitation. Case report and bibliographic review

Objetivos: Realizar una revisión de la literatura sobre métodos de rehabilitación mínimamente invasivos, y presentar un caso clínico acerca de un nuevo procedimiento denominado sistematización adhesiva temporaria (SAT), destinado a pacientes que presentan pérdida de sustancia dentaria y que se caracteriza como un abordaje terapéutico predecible para transferir el proyecto rehabilitador (encerado) a la boca del paciente mediante 3 pasos bien definidos y con objetivos específicos. Caso clínico: Un paciente adulto joven de sexo masculino con desgastes severos por bruxismo es rehabilitado temporalmente con resinas compuestas (SAT) para devolver la anatomía perdida en forma adhesiva y conservadora, siguiendo un protocolo de abordaje terapéutico predecible denominado EGOP (estéticamente guiado y oclusalmente protegido). Este procedimiento, que es considerado muchas veces de transición previo a las restauraciones finales, nos permite evaluar la estética, la oclusión y mejorar la comunicación entre el equipo de trabajo para poder realizar el cambio por restauraciones cerámicas en forma gradual. En aquellos pacientes que necesitan rehabilitaciones totales producto del desgaste dentario severo, la SAT puede ser una herramienta que facilite al odontólogo la posibilidad de restablecer los patrones oclusales y estéticos perdidos sin la necesidad de realizar desgastes dentarios y provisionales como se hacía clásicamente (AU)

Aims: To carry out a literature review on minimally-invasive rehabilitation methods and to present a clinical case on a new procedure called Temporary Adhesive Systemization (TAS), intended for patients that show a considerable loss of dental substance, characterized by a predictable therapeutic approach to transfer the rehabilitation diagnosis wax-up through 3 well defined steps and with specific objectives to the patient´s dentition. Clinical case: A young adult male patient with severe wear due to bruxism is temporarily rehabilitated with composite resins (TAS) to return the lost anatomy in a conservative way, following a predictable therapeutic approach protocol called EGOP (aesthetically guided and occlusally protected). This procedure, which is often considered transitional prior to final restorations, allows us to evaluate aesthetics, occlusion, improve communication between the working team and to be able to gradually change for ceramic restorations. In patients that need full rehabilitation due to severe dental erosion, TAS is a predictable procedure that helps the dentist to re-establish the loss of aesthetical and occlusal patterns, without the need of preparing the teeth for the classic provisional restorations (AU)

Tratamiento Rehabilitador Estético-Oclusal con Resinas Compuestas en una Paciente con Mordida Profunda y Desgaste Severo / Aesthetic-Occlusal Rehabilitation Treatment with Composite Resins in a Patient with Deep Bite and Dental Wear

RESUMEN: La rehabilitación oral tradicional del paciente con mordida profunda y braquifacial puede ser muy compleja e invasiva, sin embargo, podría involucrar muchas especialidades para su resolución ideal. Un análisis integral estético-oclusal es necesario antes de empezar el tratamiento para hacer propuestas con el menor costo biológico, de tiempo y económico. La odontología adhesiva permite una propuesta aditiva y no invasiva como un tratamiento de mediano plazo o transitorio. Este artículo presenta un caso de una paciente de 46años de edad con mordida profunda anterior y desgaste dental severo en las caras palatinas de los dientes antero-superiores, sin disfunción temporomandibular, ni compromisos sistémicos. Se destaca la rehabilitación estética- oclusal con el mínimo compromiso biológico (ultra-conservadora), mediante restauraciones adhesivas semi-indirectas de resina compuesta con acompañamiento de 12meses. Esta propuesta rehabilitadora con resinas compuestas representa una alternativa de tratamiento para el manejo del paciente con mordida profunda anterior. El control a un año de tratamiento demostró que se siguió una secuencia y resolución que aseguró los principios de la rehabilitación oral, al mismo tiempo, se procedió de la manera menos invasiva posible.

ABSTRACT: The traditional oral rehabilitation of the patient with deep bite and brachifacial can be very complex and invasive, however, a number of treatments could be considered to improve rehabilitation. A comprehensive aesthetic-occlusal analysis is necessary prior to starting treatment in order to consider the best procedure, time involved, and economic cost. Adhesive dentistry allows an additive and non-invasive proposal as a medium-term or transitory treatment. A case of a 46-year-old patient is presented, with anterior deep bite and severe dental wear on palatal surfaces of the antero-superior teeth, without temporomandibular dysfunction, or systemic compromises. The objective was to emphasize the aesthetic and occlusal rehabilitation with the least biological commitment (ultraconservative), through semi-indirect adhesive restorations of composite resin with 12 months follow-up. This restorative proposal with composite resins represents an alternative treatment for patient management with anterior deep bite. Control at one year of treatment showed that a sequence and resolution was followed, that ensured adequate oral rehabilitation in the least invasive manner possible.

Six-month performance of restorations produced with the ethanol-wet-bonding technique: a randomized trial

Abstract This double-blind randomized controlled clinical trial evaluated the effectiveness of dentin pretreatment with 100% ethanol (EWBT - ethanol wet bonding technique) and different adhesive protocols in noncarious cervical lesions (NCCL) after 6 months. Patients presenting at least one NCCL were included. NCCLs (n=148) were randomly assigned to 4 groups: NE (Non-EWBT + three-step etch-and-rinse (Scotchbond Multi Purpose, 3M ESPE [MP]), E (EWBT + MP); EB (EWBT + [Bond - third step of MP]), and EU (EWBT + universal adhesive (Single Bond Universal, 3M ESPE). Conventional acid-etching (Condac 37%, FGM) and nanohybrid resin composite (Z350, 3M ESPE) were used. Trained and calibrated examiners (Kappa = 0.61) evaluated the restorations at baseline (7 days) and 6-month recall using the USPHS modified criteria. Data were subjected to Chi square (α = 0.05). Differences in the success rate were found for the treatments (p = 0.003). EB presented the lowest success rate compared with the other groups (p < 0.02). No significant differences were detected among NE, E, and EU (p > 0.49). The survival rates were 97.23%, 97.30%, 78.95%, and 97.30% for NE, E, EB, and EU, respectively. Regarding postoperative sensitivity, a significant reduction was found for groups E (p = 0.027) and EU (p < 0.01) after 6 months. After 6 months, EWBT associated to the hydrophobic adhesive system had the highest failure rate.

One-Year Evaluation of a Simplified Ethanol-Wet Bonding Technique: A Randomized Clinical Trial

The objective of this randomized clinical trial was to evaluate the clinical performance of adhesive restorations using a three-step etch-and-rinse adhesive (TSER), a one-step self-etching adhesive (OSSE), and a simplified ethanol-wet bonding technique (EWBT) prior to the application of a composite resin in non-carious cervical lesions. Ninety-three restorations (31 for each group) were placed in 17 patients by a single operator. No cavity preparation was performed. After 6 and 12 months, the restorations were assessed by two previously trained examiners using modified Ryge criteria for retention (kappa=1.00) and marginal adaptation/staining (kappa=0.81), and the results were analyzed by Fisher's exact and Kruskal-Wallis tests, respectively. No significant differences were observed among groups at the 6- and 12-month time points for any of the assessed criteria (p≥0.05). The intra-group analysis performed by Cochran's test (for retention) and Wilcoxon test (for marginal adaptation/staining) revealed significant differences between the baseline/12-month time intervals in marginal adaptation in OSSE (p=0.0180) and in marginal staining in TSER (p=0.0117). The survival analysis for retention criteria performed using a log-rank test did not show significant differences (p>0.05). The restorations placed using the simplified EWBT performed equally well as the other adhesive strategies employed.

O objetivo deste ensaio clínico randomizado foi avaliar o comportamento clínico das restaurações adesivas, usando um adesivo convencional de três passos (CTP), um adesivo autocondicionante de um passo (AUP) e uma técnica simplificada da adesão úmida por etanol (AUET) antes da aplicação de uma resina composta em lesões cervicais não-cariosas. Noventa e três restaurações (31 para cada grupo) foram realizadas em 17 pacientes por um único operador. Nenhum preparo cavitário foi realizado. Depois de 6 e 12 meses, as restaurações foram avaliadas por 2 examinadores previamente treinados, utilizando critérios de Ryge modificados para retenção (kappa=1,00) e adaptação/manchamento marginal (kappa=0,81), e os resultados foram analisados pelos testes Exato de Fisher e Kruskal-Wallis, respectivamente. Não foram observadas diferenças significativas entre os grupos aos 6 e 12 meses para qualquer um dos critérios avaliados (p≥0,05). A análise intra-grupo feita pelos testes Q de Cochran (para retenção) e Wilcoxon (para adaptação/manchamento marginal) revelou diferenças significativas entre os intervalos de tempo baseline/12 meses para a adaptação marginal no AUP (p=0,0180) e manchamento marginal no CTP (p=0,0117). A análise de sobrevivência para o critério retenção realizada utilizando o teste de log-rank não apresentou diferenças significantes (p≥0,05). As restaurações feitas utilizando a técnica simplificada da adesão úmida por etanol comportaram-se igualmente às outras estratégias adesivas empregadas.

Evaluación del desgaste por cepillado, in vitro, de una resina compuesta, fotopolimerizada por lámpara halógena: en dos tiempos diferentes / Wear evaluation of the in vitro toothbrushing of a composite resin cured by halogent light curing: in two different times

El objetivo de este trabajo fue evaluar el desgaste abrasivo por cepillado in vitro de la resina compuesta 4Seasons, de dos colores diferentes (A3 y C4) y polimerizadas por dos diferentes tiempos (20 e 40 s), utilizando cepillo dental y dentífrico; también se uso como material de referencia, el PMMA. Fueron confeccionados 10 especímenes, para cada uno de los 5 grupos (PMMA, A3 20s, A3 40s, C4 20s, C4 40s). Después de su confección, cada espécimen era almacenado en agua desmineralizada a 37 ± 2 ºC, por 24 horas, regularizados con lija; después del lavado en ultrasonido, volvían a ser almacenados en las mismas condiciones por 7 días. El cepillado fue realizado en una máquina para desgaste por cepillado, aplicándose una carga de 3N, con frecuencia de 4,5 ciclos/seg; el período de cepillado de un espécimen comprendía 150,000 ciclos. Fueron realizados 5 lotes de cepillado, de modo que un espécimen de cada material de cada grupo fuese sometido a cada una de las posiciones ocupadas por los 10 cepillos. La cantidad de masa pérdida fue calculada por pesaje (pre y post cepillado). Este trabajo también fue ilustrado con gráficos de rugosidad y MEB. La tasa media de desgaste fue de 2,8 mg para PMMA, de 5,5 mg para A3-20s, 4,7 mg para A3-40 s, 5,4 para C4-20s y 4,2 mg para C4-40s. ANOVA mostro que no hubo diferencia significante entre los grupos, para p=0,166. Concluyéndose que no existió diferencia de resistencia al desgaste abrasivo entre los grupos

To evaluate abrasive wear, by weight changes, of a resin composite to in vitro toothbrushing, of two different colors (A3 and C4), cured by two times (20 and 40 s). Resin composite 4Seasons was material studied and PMMA was used as reference material. Ten cylindric samples had been prepared for each one of the five evaluated groups (PMMA, A3 20s, A3 40s, C4 20s, C4 40s). After confection, samples were immersed in deionized water, at 37± ºC, for 24 h, and then regularized by abrasive gritting with sandpaper, after that, were cleaned in ultrasound bath, and restored to the same described conditions, for 7 days. The toothbrushing was then conducted in a proper machine that holds 10 specimens, with 3 N load of each toothbrush on the respective sample using dentifrice and water. 150.000 cycles were applied per group. Five lots of toothbrushing had been performed; in a way that one sample of each group had been submitted to the brushing action at one position in the machine. The amount of weight loss for each sample was calculated by means of weighting. Roughness and MEV were also evaluated. Data were analyzed with one-way ANOVA. The average rate of wear was of 2.8 mg for PMMA, 5.5 mg for A3-20s, 4.7 mg for A3-40 s, 5.4 for C4-20s, and 4,2 mg for C4-40s. One-way ANOVA showed no significant difference between groups (p=0.166). It was possible to conclude that difference of the resistance to the abrasive wear between the studied groups did not exist

Glass ionomer cements and their role in the restoration of non-carious cervical lesions

Glass ionomer based materials are clinically popular in several areas of restorative dentistry, but restoration of cervical lesions has proven particularly successful. Various etiologies, conformations, locations and structural characteristics make non-carious cervical lesions more challenging to adhesive restorative procedures and marginal seal in the long run. Due to their characteristics, glass ionomer cements (GICs) have precise indication for these cases. Moreover, the use of a GIC base underneath composite resin, the so-called "sandwich" or mixed technique, allows associating the good characteristics of composite resins and GICs, and has been considered quite useful in the restoration of non-carious cervical defects. The aim of this paper is to critically review the literature and discuss peculiar features of GICs regarding their role in the restoration of non-carious cervical lesions.