ABSTRACT
SUMMARY: The objective of this study was to compare and analyze the clinical efficacy of different approaches of intramedullary nailing with blocking screws for proximal tibial fractures. One hundred cases of proximal tibial fractures treated in the orthopedic department from April 2021 to September 2023 were included in the study and divided into control and treatment groups using a random number table. A control group (n=50) treated with infrapatellar intramedullary nailing with blocking screws, and a treatment group (n=50) treated with suprapatellar intramedullary nailing with blocking screws. We observed the excellent and good rates in both groups, compared various perioperative indicators, changes in joint range of motion (ROM), Visual Analog Scale (VAS) pain scores, Lysholm knee joint function scores, changes in inflammatory factors, and various bone markers before and after treatment, and analyzed postoperative complications. There were no significant differences in baseline data such as age, sex, body mass index, fracture site, concomitant fibular fractures, time from fracture to surgery, injury mechanism, and AO/OTA fracture classification between the two groups (P>0.05). The excellent and good rate in the treatment group after treatment was 90.00 % (45/50), significantly higher than 72.00 % (36/50) in the control group (P0.05). However, the treatment group had shorter surgical times and fewer fluoroscopy times than the control group (P<0.05). After treatment, both groups showed increased ROM and Lysholm scores, as well as decreased VAS scores. Moreover, compared to the control group, the treatment group had higher ROM and Lysholm scores and lower VAS scores (P<0.05). Inflammatory factors including interleukin-1β (IL-1β), C-reactive protein (CRP), tumor necrosis factor-α (TNF-α), osteocalcin (BGP), and calcitonin (CT) increased in both groups after treatment, while total n- terminal propeptide of type I procollagen (Total-PINP) and b-C-terminal telopeptide of type I collagen (β-CTX) decreased. Compared to the control group, the treatment group exhibited greater increases in inflammatory factors and lower levels of Total-PINP and β-CTX, but higher BGP and CT levels (P<0.05). The incidence of postoperative complications was 8.00 % (4/50) in the treatment group and 24.00 % (12/50) in the control group, with statistically significant differences (P=4.762, X2=0.029). In the treatment of proximal tibial fractures, intramedullary nailing with blocking screws using the suprapatellar approach achieves significant clinical efficacy. It reduces surgical time, minimizes radiation exposure to healthcare workers and patients, improves knee joint range of motion and function, decreases postoperative pain and complication rates, suppresses inflammatory reactions, and promotes the improvement of bone markers related to fracture healing.
El objetivo de este estudio fue comparar y analizar la eficacia clínica de diferentes abordajes de clavo intramedular con tornillos de bloqueo para las fracturas de tibia proximal. Se incluyeron en el estudio 100 casos de fracturas de tibia proximal tratados en el departamento de ortopedia desde abril de 2021 hasta septiembre de 2023 y se dividieron en grupos de control y de tratamiento mediante una tabla de números aleatorios. Un grupo control (n=50) tratado con clavo intramedular infrapatelar con tornillos de bloqueo, y un grupo tratamiento (n=50) tratado con clavo intramedular suprapatelar con tornillos de bloqueo. Observamos excelentes y buenas tasas en ambos grupos, comparamos varios indicadores perioperatorios, cambios en el rango de movimiento articular (ROM), puntuaciones de dolor en la escala visual analógica (EVA), puntuaciones de función Lysholm de la articulación de la rodilla , cambios en factores inflamatorios y varios marcadores óseos, antes y después del tratamiento, y se analizaron las complicaciones postoperatorias. No hubo diferencias significativas en los datos iniciales como edad, sexo, índice de masa corporal, sitio de fractura, fracturas de fíbula concomitantes, tiempo desde la fractura hasta la cirugía, mecanismo de lesión y clasificación de fractura AO/OTA entre los dos grupos (P>0,05). La tasa de excelente y buena en el grupo con tratamiento después del tratamiento fue del 90,00 % (45/50), significativamente mayor que el 72,00 % (36/50) en el grupo control (P0,05). Sin embargo, el grupo con tratamiento tuvo tiempos quirúrgicos más cortos y menos tiempos de fluoroscopía que el grupo control (P <0,05). Después del tratamiento, ambos grupos mostraron un aumento de las puntuaciones de ROM y Lysholm, así como una disminución de las puntuaciones de VAS. Además, en comparación con el grupo control, el grupo con tratamiento tuvo puntuaciones ROM y Lysholm más altas y puntuaciones EVA más bajas (P <0,05). Los factores inflamatorios que incluyen interleucina-1β (IL-1β), proteína C reactiva (CRP), factor de necrosis tumoral-α (TNF-α), osteocalcina (BGP) y calcitonina (CT) aumentaron en ambos grupos después del tratamiento, mientras que el total disminuyó el propéptido n-terminal del procolágeno tipo I (Total-PINP) y el telopéptido β-C-terminal del colágeno tipo I (β-CTX). En comparación con el grupo control, el grupo con tratamiento mostró mayores aumentos en los factores inflamatorios y niveles más bajos de Total-PINP y β-CTX, pero niveles más altos de BGP y CT (P <0,05). La incidencia de complicaciones postoperatorias fue del 8 % (4/50) en el grupo de tratamiento y del 24 % (12/50) en el grupo control, con diferencias estadísticamente significativas (P=4,762, X2=0,029). En el tratamiento de las fracturas de tibia proximal, el clavo intramedular con tornillos de bloqueo mediante el abordaje suprapatelar logra una eficacia clínica significativa. Reduce el tiempo quirúrgico, minimiza la exposición a la radiación de los trabajadores de la salud y los pacientes, mejora el rango de movimiento y la función de la articulación de la rodilla, disminuye el dolor postoperatorio y las tasas de complicaciones, suprime las reacciones inflamatorias y promueve la mejora de los marcadores óseos relacionados con la curación de las fracturas.
Subject(s)
Humans , Male , Female , Adolescent , Adult , Middle Aged , Aged , Young Adult , Tibial Fractures/surgery , Bone Screws , Fracture Fixation, Internal/instrumentation , Fracture Fixation, Internal/methods , Bone Nails , Pain Measurement , Range of Motion, Articular , Treatment Outcome , Fracture Fixation, Intramedullary , Fracture Fixation, Intramedullary/instrumentationABSTRACT
Tibial pilon fractures are a complex injury to treat due to the great involvement of soft and bone tissues. The classic surgical treatment is based on open reduction with internal fixation (ORIF), adding morbidity to the soft tissues, increasing the risk of complications. This has motivated the development of minimally invasive and/or percutaneous techniques to reduce complications, and with the advent of arthroscopy, achieve anatomical reductions. METHODS: A retrospective observational study of twelve patients with tibial pilon fractures who were treated in our center with minimally invasive and/ or percutaneous osteosynthesis with arthroscopic support was carried out between January 2019 and June 2021. Fractures were characterized using the AO/OTA classification for tibial pilon. Age, sex, fracture mechanism, exposure and initial management in the emergency department (cast immobilization or external fixation), definitive treatment, complications and clinical and functional evaluation twelve months after definitive osteosynthesis. For this last point, plantar flexion, dorsiflexion and the AOFAS and FAOS Score were measured. RESULTS: The operated patients were 12, 8 were men (67%) and 4 were women (33%). The average age was 49 (17-68) years. The definitive treatment was carried out after an average of 8 days (5-12 days). Surgical treatment schemes were as follows: percutaneous osteosynthesis with medial anatomical plate and arthroscopic support (OPAA), minimally invasive osteosynthesis with cannulated screws and arthroscopic support (OMIAA) and osteosynthesis with external circular guide and arthroscopic support (OTCAA). In the AOFAS Score, three patients had excellent results (≥ 90 points), 6 patients had good results (≥ 80 points) and 3 patients had acceptable results (≥ 70 points). In the FAOS Score, eight patients had over 80% (good results) and 4 patients had over 60% (accep - table results). DISCUSSION: Historically, tibial pilon fractures have been considered non-reconstructable and with poor long-term results. Initially this paradigm changed with the principles of Rüedi for the reconstruction of the tibial pilon and improve the results. ORIF has been widely used until today, it allows achieving an anatomical joint reduction, it allows to give stability and length to the fibula, graft contribution and sta - bilization with the medial plate. Today this concept is changing again, since the emphasis is on the care of the soft tissues to allow a better recovery of the patient and reduce the complications of the classic approach, it is in this context that the appearance of minimally invasive and/or percutaneous techniques with arthroscopic assistance has allowed us to have excellent functional and clinical results with less da - mage to the soft tissues. CONCLUSION: The proper management and care of the soft tissues in a high-energy fracture of the tibial pilon is essential to obtain favorable clinical results and thus achieve restoration of ankle function. Percutaneous and minimally invasive management has optimized management of the tibial pilon, redu - cing the rates of complications, amputation, and pri - mary arthrodesis.
Subject(s)
Humans , Male , Female , Adolescent , Adult , Middle Aged , Aged , Tibial Fractures/surgery , Minimally Invasive Surgical Procedures , Fracture Fixation, Internal/methods , Arthroscopy/methods , Tibial Fractures/pathology , Retrospective Studies , Treatment Outcome , Fracture Fixation, Internal/instrumentationABSTRACT
INTRODUCCIÓN: Una de las complicaciones de la osteosíntesis retrógrada del escafoides es la protrusión del tornillo en la articulación radiocarpiana, dada la limitada visualización intraoperatoria del polo proximal del escafoides con las proyecciones tradicionales. OBJETIVO: Evaluar la capacidad de una nueva proyección radiológica, la proyección "tangencial del escafoides dorsal", o TED, para identificar tornillos prominentes radiocarpianos durante la osteosíntesis retrógrada del escafoides con tornillos canulados. MATERIALES Y MÉTODOS: Estudio cadavérico en muñecas frescas congeladas. Se introdujo en el escafoides un tornillo canulado con técnica retrógrada estándar. La proyección TED fue evaluada en 5 muñecas, con angulaciones del antebrazo de 15°, 30° y 45° para definir la mejor visualización del polo proximal del escafoides y del tornillo. Se comparó la capacidad para identificar la prominencia del tornillo en el polo proximal de la proyección TED de 30° con 5 proyecciones tradicionales de escafoides en 9 muñecas. El tornillo se posicionó a nivel de la superficie del escafoides, y luego se avanzó a intervalos de 0,5 mm bajo visualización directa por artrotomía dorsal. Tras cada intervalo, se repitieron todas las proyecciones para determinar su capacidad de detectar tornillos prominentes en el escafoides. RESULTADOS: La mejor visualización del polo proximal del escafoides se logró con la proyección TED de 30°. Al comparar la proyección TED de 30° y las tradicionales, con la TED se logró identificar tornillos prominentes a 0,8 mm promedio, seguida por la proyección posteroanterior con cubitalización y extensión a 1.3 mm (p » 0.014), con una alta precisión y correlación interobservador de estas proyecciones. CONCLUSIÓN: La proyección TED demostró ser la más sensible para detectar tornillos prominentes en la articulación radiocarpiana. Su uso rutinario podría evitar complicaciones durante la osteosíntesis.
INTRODUCTION: One of the complications of the retrograde percutaneous scaphoid fixation is the protrusion of the screw in the radiocarpal joint due to the limited intraoperative visualization of the proximal pole of the scaphoid with the traditional radiographic views. OBJETIVE: To evaluate the sensitivity of a novel radiographic view (the skyline scaphoid view, SSV) to detect screws protruding in the radiocarpal joint during the retrograde fixation of the scaphoid. MATERIALS AND METHODS: We studied nine cadaverous fresh frozen wrists. A retrograde cannulated screw was inserted in the scaphoid. To validate the SSV, 5 wrists were studied, comparing 3 forearm angulations (15°, 30° and 45°) to get the best visualization of the proximal pole and screw. We compared the ability to identify the protrusion of the screw in the proximal pole of the 30° SSV with that of 5 standard scaphoid radiographic views in 9 wrists. The screw was positioned at the level of the surface of the scaphoid, and was sequentially protruded in 0.5 mm increments, with direct visualization of its tip through a dorsal capsulotomy. After each increment, all views were repeated to determine if they were able to detect screws projecting from the scaphoid. RESULTS: The best visualization of the proximal pole of the scaphoid was found with the 30° SSV. In the comparison of the 30° SSV and the standard views, with the SSV we were able to identify the protrusion of the screws at an average of 0.8 mm, followed by the posterior-anterior view with ulnar deviation and extension at 1.3 mm (p » 0.014), with high precision and interobserver agreement regarding these views. CONCLUSION: The SSV was the most sensitive view to detect protruding screws in the proximal pole of the scaphoid. Its routine use could avoid complications during osteosynthesis.
Subject(s)
Humans , Wrist Joint/diagnostic imaging , Bone Screws/adverse effects , Scaphoid Bone/diagnostic imaging , Fracture Fixation, Internal/adverse effects , Radiology/methods , Wrist Joint/surgery , Cadaver , Observer Variation , Scaphoid Bone/surgery , Fracture Fixation, Internal/instrumentationABSTRACT
Los fragmentos posterolaterales (FPLs) en fracturas de platillo tibial son frecuentes, pero difíciles de reducir y estabilizar. Actualmente existe controversia sobre cómo deben ser abordados; si bien un abordaje anterolateral es más seguro, este puede ser insuficiente para lograr una correcta reducción. Los abordajes posterolaterales y posteriores ofrecen una visión directa y permiten una fijación con ventaja biomecánica; sin embargo, son más demandantes y exponen al paciente a una mayor morbilidad. A continuación, se presenta una nota técnica sobre la reducción y fijación de FPLs con una placa rim por medio de un abordaje anterolateral extendido a través del espacio paraligamento colateral lateral.
Posterolateral fragments (PLFs) are commonly seen in tibial plateau fractures, but their reduction and fixation are challenging. There is no consensus about the ideal approach to fix this particular fragment. Even though an anterolateral approach is a safe option, it may impair a correct reduction. The posterolateral and posterior approaches offer direct visualization of the fragment, and enable a fixation with a biomechanical advantage; however, they are more demanding and expose the patient to a higher risk if morbidity. The following technical note describes the reduction and fixation of PLFs with a rim plate through an extended anterolateral approach using the paralateral collateral ligament space.
Subject(s)
Humans , Male , Aged , Tibial Fractures/surgery , Bone Plates , Fracture Fixation, Internal/methods , Tibial Fractures/rehabilitation , Collateral Ligaments , Fracture Fixation, Internal/instrumentationABSTRACT
OBJECTIVES: The recent advancements in spine fixation aid in the treatment of complex spinal pathologies. Both the iliac screw (IS) and the S2-alar-iliac (S2AI) screw provide adequate stability in the fixation of complex lumbosacral spine pathologies, leading to a significant increased rate of using these techniques in the daily practice of the spine surgeons. This study aims to analyze, describe, and compare the insertion and positioning parameters of the S2AI screw and IS techniques in children without spinal deformities. METHODS: An observational retrospective study was conducted at a university hospital in 2018, with 25 computed tomography (CT) images selected continuously. Mann-Whitney-Shapiro-Wilk tests were performed. The reliability of the data was assessed using the intraclass correlation. The data were stratified by age group only for Pearson's correlation analysis. RESULTS: The mean age was 11.7 years (4.5 SD). The mean IS length was 106.63 mm (4.59 SD). The mean length of the S2AI screw was 104.13 mm (4.22 SD). The mean skin distance from the IS entry point was 28.13 mm (4.27 SD) and that for the S2AI screw was 39.96 mm (4.54 SD). CONCLUSIONS: Through CT, the S2AI screw trajectory was observed to have a greater bone thickness and skin distance than the IS. There was a linear correlation between age and screw length for both techniques. A similar relationship was observed between skin distance and age for the S2AI screw technique. In children, the S2AI screw technique presents advantages such as greater cutaneous coverage and implant thickness than the IS technique.
Subject(s)
Humans , Child , Sacrum , Spinal Fusion/methods , Spine/diagnostic imaging , Bone Screws , Fracture Fixation, Internal/instrumentation , Spinal Fusion/instrumentation , Spine/surgery , Tomography, X-Ray Computed , Reproducibility of Results , Retrospective Studies , Treatment OutcomeABSTRACT
La reducción cerrada y la fijación percutánea ha sido el gold standard para las fracturas supracondíleas de Gartland tipo II y III. La técnica de enclavado percutáneo transfocal endomedular (TEPTE) ha surgido como alternativa quirúrgica con los beneficios de no lesionar nervios importantes en la región del codo. El objetivo del presente estudio fue comparar los resultados funcionales y estéticos de niños con diagnóstico de fracturas supracondíleas de húmero Gartland tipo II y III, tratados con la TEPTE y la técnica de fijación cruzada (TFC). Se realizó un estudio retrospectivo, observacional, transversal, durante los meses de enero de 2017 a mayo de 2018 de niños con fracturas supracondíleas, tratados con el TEPTE (grupo uno) y TFC (grupo dos). Evaluamos la funcionalidad y la deformación mediante la escala de Flynn. Para el análisis estadístico, se utilizó el test Mann-Whitney para muestras independientes en el programa SPSS. Fue considerado como significativo valores de como p ≤ 0,05. Los resultados demostraron un valor de 4,500 con un p = 0,000, evidenciando diferencias significativas entre los resultados de ambas técnicas respecto a la perdida de movilidad y el ángulo de transporte, a favor de la TFC.
Closed reduction and percutaneous fixation has been the gold standard for Gartland supracondylar fractures type II and III. Percutaneous transfocal intramedullary nailing (TEPTE) has emerged as a surgical alternative with the benefits of not damaging important nerves. The aim of the present study is to compare the functional and aesthetic results of children diagnosed with Gartland humerus supracondylar fractures type II and III, treated with TEPTE and crossed fixation. A retrospective, observational, transverse cohort study was conducted during the months of January 2017 to May 2018 of children with supracondylar fractures, treated with TEPTE (group 1) and cross-fixation (group 2). We evaluate functionality and deformation using the Flynn Scale. For statistical analysis, the Mann-Whitney test was used for independent samples in the SPSS program. Values of p ≤ 0.05 were considered significant. The results showed a value of 4,500 with a p = 0.000, as p≤0.05, it indicates that there are significant differences between the results of both techniques, for the loss of mobility and the transport angle, in favor of the crossed technique, so that we conclude not TEPTE about crosslinking.
Subject(s)
Humans , Male , Female , Child, Preschool , Child , Fracture Fixation, Internal/instrumentation , Humeral Fractures/surgery , Fluoroscopy/methods , Cross-Sectional Studies , Retrospective Studies , Follow-Up Studies , Ecuador , Fracture Fixation, Internal/methods , Humeral Fractures/diagnostic imaging , HumerusABSTRACT
Abstract Purpose: To investigate the effect of intermittent vibration at different intervals on bone fracture healing and optimize the vibration interval. Methods: Ninety sheep were randomized to receive no treatment (the control group), incision only (the sham control group), internal fixation with or without metatarsal fracture (the internal fixation group), and continuous vibration in addition to internal fixation of metatarsal fracture, or intermittent vibration at 1, 2, 3, 5, 7 and 17-day interval in addition to internal fixation of metatarsal fracture (the vibration group). Vibration was done at frequency F=35 Hz, acceleration a=0.25g, 15 min each time 2 weeks after bone fracture. Bone healing was evaluated by micro-CT scan, bone microstructure and mechanical compression of finite element simulation. Results: Intermittent vibration at 7-day interval significantly improved bone fracture healing grade. However, no significant changes on microstructure parameters and mechanical properties were observed among sheep receiving vibration at different intervals. Conclusions: Clinical healing effects should be the top concern. Quantitative analyses of bone microstructure and of finite element mechanics on the process of fracture healing need to be further investigated.
Subject(s)
Animals , Vibration/therapeutic use , Metatarsal Bones/injuries , Fracture Healing/physiology , Fractures, Bone/diagnostic imaging , Sheep , Metatarsal Bones/surgery , Metatarsal Bones/diagnostic imaging , Random Allocation , Finite Element Analysis , Fractures, Bone/surgery , Fractures, Bone/therapy , X-Ray Microtomography , Fracture Fixation, Internal/instrumentation , Fracture Fixation, Internal/standardsABSTRACT
OBJECTIVES: No studies have compared monoaxial and polyaxial pedicle screws with regard to the von Mises stress of the instrumentation, intradiscal pressures of the adjacent segment and adjacent segment degeneration. METHODS: Short-segment monoaxial/polyaxial pedicle screw fixation techniques were compared using finite element methods, and the redistributed T11-L1 segment range of motion, largest maximal von Mises stress of the instrumentation, and intradiscal pressures of the adjacent segment under displacement loading were evaluated. Radiographic results of 230 patients with traumatic thoracolumbar fractures treated with these fixations were reviewed, and the sagittal Cobb's angle, vertebral body angle, anterior vertebral body height of the fractured vertebrae and adjacent segment degeneration were calculated and evaluated. RESULTS: The largest maximal values of the von Mises stress were 376.8 MPa for the pedicle screws in the short-segment monoaxial pedicle screw fixation model and 439.9 MPa for the rods in the intermediate monoaxial pedicle screw fixation model. The maximal intradiscal pressures of the upper adjacent segments were all greater than those of the lower adjacent segments. The maximal intradiscal pressures of the monoaxial pedicle screw fixation model were larger than those in the corresponding segments of the normal model. The radiographic results at the final follow-up evaluation showed that the mean loss of correction of the sagittal Cobb's angle, vertebral body angle and anterior vertebral body height were smallest in the intermediate monoaxial pedicle screw fixation group. Adjacent segment degeneration was less likely to be observed in the intermediate polyaxial pedicle screw fixation group but more likely to be observed in the intermediate monoaxial pedicle screw fixation group. CONCLUSION: Smaller von Mises stress in the pedicle screws and lower intradiscal pressure in the adjacent segment were observed in the polyaxial screw model than in the monoaxial pedicle screw fixation spine models. Fracture-level fixation could significantly correct kyphosis and reduce correction loss, and adjacent segment degeneration was less likely to be observed in the intermediate polyaxial pedicle screw fixation group.
Subject(s)
Humans , Male , Female , Adult , Middle Aged , Thoracic Vertebrae/injuries , Spinal Fractures/surgery , Pedicle Screws , Fracture Fixation, Internal/instrumentation , Lumbar Vertebrae/injuries , Pressure , Thoracic Vertebrae/physiopathology , Thoracic Vertebrae/diagnostic imaging , Biomechanical Phenomena , Radiography , Trauma Severity Indices , Reproducibility of Results , Retrospective Studies , Analysis of Variance , Range of Motion, Articular , Spinal Fractures/physiopathology , Spinal Fractures/diagnostic imaging , Treatment Outcome , Finite Element Analysis , Equipment Design , Fracture Fixation, Internal/methods , Lumbar Vertebrae/physiopathology , Lumbar Vertebrae/diagnostic imagingABSTRACT
BACKGROUND: Although the valgus subtrochanteric osteotomy is considered as a standard surgical treatment for coxa vara, there is no consensus on the optimal method of fixation and osteotomy technique. Fixation of the osteotomy has been achieved by various methods including external fixation and internal fixation with pins and cerclage and a variety of plates. The aim of this study is the evaluation of the results of developmental coxa treated by Y intertrochanteric valgus osteotomy fixed with a T-buttress plate compared with other methods of fixation in the literature. METHODS: Eighteen corrective valgus intertrochanteric femoral osteotomies were performed in 18 patients (18 hips) for treatment of unilateral developmental coxa vara deformity and fixed with a T plate. There were 12 males and 6 females. The right hip was affected in 10 patients and the left hip in 8 patients. Clinically, patients were evaluated by Larson hip score. Radiographically, anteroposterior view of the pelvis and frog leg lateral views of the affected hip were taken preoperatively and compared with the findings at the final follow-up. RESULTS: The average follow-up was 29 months (range, 24 to 36 months). Clinical results showed improvement of the mean Larson hip score from 57.8 to 97.0 (p < 0.001). Radiological results showed that all osteotomies were completely united in 2.4 months (range, 2 to 3 months) with the achievement of the planned correction angle. The average correction of Hilgenreiner's epiphyseal angle improved from 78.2° to 27.8° (p < 0.001) at the final follow-up. The femoral neck shaft angle was improved from 93.7° to 129.9° (p < 0.001) at the final follow-up. Shortening of the affected limb was corrected from 2.8 cm to 1.3 cm (p < 0.001) at the last follow-up. No major serious complications were recorded in the present study. CONCLUSIONS: Intertrochanteric valgus osteotomy of the proximal femur fixed with a T plate may be efficient for treatment of developmental coxa vara. With careful planning, it can result in a low complication rate and insignificant or minimal recurrence rate.
Subject(s)
Child , Child, Preschool , Female , Humans , Male , Bone Plates , Coxa Vara/surgery , Femur Neck/surgery , Follow-Up Studies , Fracture Fixation, Internal/instrumentation , Osteotomy/methodsABSTRACT
El diseño de implantes para osteosíntesis es una tarea en continuo desarrollo. Las nuevas técnicas quirúrgicas, procesos de fabricación y materiales, en conjunto con el uso de herramientas de cálculo de la ingeniería de última generación, a partir de la Simulación Computacional, permiten obtener implantes más precisos y de calidad superior y dedicados especialmente a cada tipo de fractura. El diseño adecuado y detallado a partir de estas herramientas de ingeniería, es sometido a ensayos mecánicos para verificar y asegurar su eficacia y resistencia estructural. Un estudio utilizando "Técnicas Avanzadas de Análisis", a través de la Simulación Computacional, posibilitaría verificar el grado de integridad de la unión de una placa y sus tornillos, en conjunción con el comportamiento biomecánico del hueso fracturado. En este trabajo se presenta la evaluación estructural, a partir del método de elementos finitos, de una placa de compresión dinámica (DCP), considerando la influencia de diferentes tipos de tornillos y su comportamiento frente a la unión e interacción con el hueso. Esta herramienta de ingeniería utilizada para este fin, ayuda al diseñador a obtener un diseño seguro y adecuado que facilitará el apoyo a cirujanos ortopédicos en la selección de implantes biomecánicos, teniendo en cuenta el tamaño de la fractura y características del hueso.
The design of implants for osteosynthesis is a work in continuous development. New surgical techniques, manufacturing processes and materials, together with the use of tools for calculating the art engineering, from Computational Simulation allow more precise and top quality implants especially designed for each type of fracture. The adequate and detailed design based on these engineering design tools, is subjected to mechanical testing to verify and ensure their effectiveness and structural strength. A study using "Advanced Technical Analysis" through Computational Simulation, makes it possible to verify the degree of integrity of the union of a plate and screws in conjunction with the biomechanical behavior of the fractured bone. This paper presents structural assessment, from the finite element method, a dynamic compression plate (DCP), considering the influence of different types of screws and their behavior in binding and interaction with the bone. This engineering tool used for this purpose, helps the designer to ensure safe and proper designs that facilitate support for orthopedic surgeons in selecting biomechanical implants, considering the size and characteristics of the bone fracture.
Subject(s)
Humans , Computer Simulation , Fracture Fixation, Internal/instrumentation , Fractures, Bone/surgery , Bioengineering , Biomechanical Phenomena , Equipment Design , Finite Element AnalysisABSTRACT
Regardless of the method of treatment, as many as 5% of all pelvic fractures result in malunion or nonunion of the pelvis. However, there is not much information in the literature on the management of these late complications. Because they cause disabling symptoms and socioeconomic problems, some patients with malunion or nonunion of pelvic fractures need to undergo surgery. We report our experience with satisfactory results of surgery for pelvic malunion and nonunion in four patients. The key to successful reconstruction is thorough preoperative planning and methodical surgical intervention.
Subject(s)
Adult , Female , Humans , Fracture Fixation, Internal/instrumentation , Fractures, Malunited/diagnostic imaging , Fractures, Ununited/diagnostic imaging , Pelvic Bones/injuriesABSTRACT
BACKGROUND: The Targon FN implant was developed in 2007 to treat intracapsular neck of femur fractures. Early results from the design centre have shown good results in terms of fracture complications. We wished to see if these results can be reproduced in an independent institution. METHODS: The records of consecutive patients, treated with this implant between 2008 and 2011 at Queen Elizabeth Hospital, were identified and collected for this study. Operations were performed by all grades of surgeons under supervision as appropriate. These patients went on to have both clinical and radiological assessment for fracture healing and function. RESULTS: Fifty-one patients were identified with 43 patients available for final follow-up. The average age was 66 years with a minimum follow-up of 24 months. A non-union rate of 0% in the undisplaced fracture group and 1 in 12 (8%) in the displaced fracture group was observed. An avascular necrosis rate of 6% and 8% was observed for undisplaced and displaced fracture types, respectively. No significant change in premorbid to postoperative ambulation was observed and there was no wound complication. CONCLUSIONS: Our study shows similar results with those of the design centre and which are superior to those currently found in the literature for the more traditional fixation methods. It also shows that the promising results with this new implant as seen from the design institutions can be reproduced by all cadres of surgeons in non-specialist practice.
Subject(s)
Adult , Aged , Aged, 80 and over , Female , Humans , Male , Middle Aged , Young Adult , Bone Plates , Bone Screws , Femoral Neck Fractures/diagnostic imaging , Follow-Up Studies , Fracture Fixation, Internal/instrumentation , Prosthesis Design , Retrospective StudiesABSTRACT
PURPOSE: The aim of this study was to compare clinical and radiographic outcomes of proximal opening wedge osteotomy using a straight versus oblique osteotomy. MATERIALS AND METHODS: We retrospectively reviewed 104 consecutive first metatarsal proximal opening wedge osteotomies performed in 95 patients with hallux valgus deformity. Twenty-six feet were treated using straight metatarsal osteotomy (group A), whereas 78 feet were treated using oblique metatarsal osteotomy (group B). The hallux valgus angle (HVA), intermetatarsal angle (IMA), distal metatarsal articular angle, and distance from the first to the second metatarsal (distance) were measured for radiographic evaluation, whereas the American Orthopaedic Foot and Ankle Society (AOFAS) forefoot score was used for clinical evaluation. RESULTS: Significant corrections in the HVA, IMA, and distance from the first to the second metatarsal were obtained in both groups at the last follow-up (p<0.001). There was no difference in the mean IMA correction between the 2 groups (6.1+/-2.7degrees in group A and 6.0+/-2.1degrees in group B). However, a greater correction in the HVA and distance from the first to the second metatarsal were found in group B (HVA, 13.2+/-8.2degrees; distance, 25.1+/-0.2 mm) compared to group A (HVA, 20.9+/-7.7degrees; distance, 28.1+/-0.3 mm; p<0.001). AOFAS scores were improved in both groups. However, group B demonstrated a greater improvement relative to group A (p=0.005). CONCLUSION: Compared with a straight first metatarsal osteotomy, an oblique first metatarsal osteotomy yielded better clinical and radiological outcomes.
Subject(s)
Adult , Aged , Female , Humans , Male , Middle Aged , Bone Plates , Epiphyses/surgery , Ethnicity , Foot , Fracture Fixation, Internal/instrumentation , Hallux Valgus/diagnostic imaging , Lower Extremity , Metatarsal Bones/diagnostic imaging , Osteotomy/methods , Range of Motion, Articular , Retrospective Studies , Treatment Outcome , Upper ExtremityABSTRACT
Este estudo objetiva relatar um caso clínico de paciente com fratura mandibular submetido a cirurgia bucomaxilofacial, ressaltando os métodos e dispositivos utilizados no procedimento. Relato de caso: paciente masculino, 20 anos de idade, leucoderma, procurou o Serviço de Emergência do Hospital São Vicente de Paulo da cidade de Passo Fundo, RS, Brasil, apresentando traumatismo facial por agressão física em região ântero-inferior da cabeça, correspondendo à região parassinfisiária mentual. A telerradiografia de perfil mostrou fratura composta horizontal desfavorável em corpo de mandíbula direito, desde a base da mandíbula até a região alveolar dentária, entre os dentes 42 e 43. Foi realizada intervenção cirúrgica para correção dos fragmentos ósseos, preservando-se a estética do paciente. Para estabilização dos fragmentos ósseos, utilizaram-se placas de titânio fixadas por parafusos, além de bloqueio intermaxilar. Acompanhamento clínico e radiográfico de 30 dias mostrou adequada consolidação das linhas de fratura. Considerações finais: um correto diagnóstico seguido de procedimento cirúrgico e estabilização adequada das porções fraturadas permitiram sucesso no tratamento da fratura mandibular do paciente em questão...
This report aims to report a clinical case with mandibular fracture underwent maxillofacial surgery, highlighting the methods and devices used in the procedure. Case report: male patient, 20 years old, caucasian, came to the Emergency of Hospital São Vicente de Paulo in the city of Passo Fundo, RS, Brazil, with facial trauma by physical aggression in the lower anterior region of the head, corresponding the chin region. The profile radiograph showed unfavorable horizontal compound fracture in right mandibular body, from the base of the mandible to the dental alveolar region, between the teeth 42 and 43. Surgery was performed to correct bone fragments, preserving the aesthetics of the patient. To stabilize the bone fragments were used titanium plates fixed by screws and the intermaxillary block. Clinical follow-up of 30 days showed adequate radiographic consolidation of fracture lines. Final remarks: a correct diagnosis followed by surgical procedure and adequate stabilization of the fractured portions allowed success in the treatment of mandibular fracture of the patient...
Subject(s)
Humans , Male , Young Adult , Fracture Fixation, Internal/instrumentation , Mandibular Fractures/surgeryABSTRACT
O objetivo deste trabalho foi relatar a realização de osteossíntese no úmero esquerdo de uma ave silvestre utilizando-se a técnica de Doyle. Um tucano (Ramphastos toco) sofreu uma fratura transversa completa no terço proximal do úmero esquerdo. Após avaliação clínica e procedimentos pré-operatórios, a ave foi submetida à osteossíntese. A técnica cirúrgica utilizada permitiu uma perfeita coaptação dos fragmentos ósseos, ocasionando a formação de calo ósseo e recuperação do membro afetado em um período curto de tempo, apresentando-se como opção eficaz na correção de fraturas do úmero em aves de médio porte...
The aim of this study was to report the realization of the left humerus osteosynthesis of a wild bird using the Doyle technique. A toucan (Ramphastos toco) suffered a complete transverse fracture of the proximal third of the left humerus. After clinical evaluation and pre-operative procedures, the bird was submitted to osteosynthesis. The surgical technique used allowed a perfect coaptation of the bone fragments, resulting in the formation of a bone callus and recovery of the affected limb in a short period of time presenting this as an effective option for the correction of fractures of the humerus in medium size birds...
Subject(s)
Animals , Birds , Fracture Fixation, Internal/instrumentation , Fracture Fixation, Internal/veterinary , Humeral Fractures/veterinary , Orthopedics/veterinary , Surgical Procedures, Operative/methods , Surgical Procedures, Operative/veterinaryABSTRACT
This descriptive study was conducted to determine the most common site of mandible fractures. 200 patients with fracture mandible who reported to Department of Oral and Maxillofacial Surgery from April 2012 to September 2012 formed study group. Data concerning age, gender, mechanism of injury and site of fracture evaluated and recorded on specially designed proforma. Orthopentomogram [OPG] and where necessary postero- Anterior and right and left lateral oblique views of the mandible were used to diagnose the fracture site. Fracture mandible was predominantly common in males [84%] as compared to females [16%] with male to female ratio of 5.25:1. The age range was 2-65 years with mean age of 21.45 S.D +/- 12.59 years. The most common age group involved was 21-30 years [30%] and road traffic accident was the common mechanism of injury [57%] followed by fall [31.5%]. Parasymphysis was the most common site when mandible was fractures at a single site i.e., 43%, while parasymphysis and angle fracture combination was observed in 31%. The study revealed that majority of the patients were young adult males. The most common etiological fracture was road traffic accident and isolated parasymphysis was the most common fracture site
Subject(s)
Humans , Male , Female , Accidents, Traffic , Bone Plates , Fracture Fixation, Internal/instrumentation , Mandibular Fractures/surgery , Age Factors , Surgery, Oral , Mandibular Fractures/etiologyABSTRACT
BACKGROUND: To determine relative fixation strengths of a single lateral locking plate, a double construct of a locking plate, and a tibial nail used in treatment of proximal tibial extra-articular fractures. METHODS: Three groups of composite tibial synthetic bones consisting of 5 specimens per group were included: lateral plating (LP) using a locking compression plate-proximal lateral tibia (LCP-PLT), double plating (DP) using a LCP-PLT and a locking compression plate-medial proximal tibia, and intramedullary nailing (IN) using an expert tibial nail. To simulate a comminuted fracture model, a gap osteotomy measuring 1 cm was created 8 cm below the knee joint. For each tibia, a minimal preload of 100 N was applied before loading to failure. A vertical load was applied at 25 mm/min until tibial failure. RESULTS: Under axial loading, fixation strength of DP (14,387.3 N; standard deviation [SD], 1,852.1) was 17.5% greater than that of LP (12,249.3 N; SD, 1,371.6), and 60% less than that of IN (22,879.6 N; SD, 1,578.8; p < 0.001, Kruskal-Wallis test). For ultimate displacement under axial loading, similar results were observed for LP (5.74 mm; SD, 1.01) and DP (4.45 mm; SD, 0.96), with a larger displacement for IN (5.84 mm; SD, 0.99). The median stiffness values were 2,308.7 N/mm (range, 2,147.5 to 2,521.4 N/mm; SD, 165.42) for the LP group, 4,128.2 N/mm (range, 3,028.1 to 4,831.0 N/mm; SD, 832.88) for the DP group, and 5,517.5 N/mm (range, 3,933.1 to 7,078.2 N/mm; SD, 1,296.19) for the IN group. CONCLUSIONS: During biomechanical testing of a simulated comminuted proximal tibial fracture model, the DP proved to be stronger than the LP in terms of ultimate strength. IN proved to be the strongest; however, for minimally invasive osteosynthesis, which may be technically difficult to perform using a nail, the performance of the DP construct may lend credence to the additional use of a medial locking plate.
Subject(s)
Humans , Biomechanical Phenomena , Bone Nails , Bone Plates , Fracture Fixation, Internal/instrumentation , Fractures, Comminuted/physiopathology , Models, Anatomic , Tibial Fractures/physiopathologyABSTRACT
BACKGROUND: Distal radius fracture is the most common fracture of the upper extremity, and approximately 60,000 distal radius fractures occur annually in Korea. Internal fixation with an anatomical volar locking plate is widely used in the treatment of unstable distal radius fractures. However, most of the currently used distal radius anatomical plate systems were designed based on the anatomical characteristics of Western populations. Recently, the Korean-type distal radius anatomical volar plate (K-DRAVP) system was designed and developed based on the anatomical characteristics of the distal radius of Koreans. The purpose of this study was to evaluate the preliminary results of the new K-DRAVP system, and to compare its radiologic and functional results with those of the other systems. METHODS: From March 2012 to October 2012, 46 patients with acute distal radius fractures who were treated with the K-DRAVP system at three hospitals were enrolled in this study. Standard posteroanterior and lateral radiographs were obtained to assess fracture healing, and three radiographic parameters (volar tilt, radial inclination, and radial length) were assessed to evaluate radiographic outcomes. The range of motion and grip strength, the Gartland and Werley scoring system, and the disabilities of the arm, shoulder and hand (DASH) questionnaire were used to assess clinical and functional outcomes. RESULTS: All radiologic parameters were restored to normal values, and maintained without any loosening or collapse until the time of final follow-up. Grip strength was restored to 84% of the value for the unaffected side. The mean range of motion of the wrist at final follow-up was restored to 77%-95% of the value for the unaffected side. According to the Gartland and Werley scoring system, there were 16 excellent, 26 good, and 4 fair results. The mean DASH score was 8.4 points. There were no complications after surgery. CONCLUSIONS: The newly developed K-DRAVP system could be used to restore and maintain good anatomical parameters, and provide good clinical outcomes with low complication rates. This system is a promising surgical option for the treatment of distal radius fractures in the Korean population.
Subject(s)
Adult , Aged , Aged, 80 and over , Female , Humans , Male , Middle Aged , Bone Plates , Fracture Fixation, Internal/instrumentation , Radius/diagnostic imaging , Radius Fractures/diagnostic imaging , Range of Motion, Articular , Republic of Korea , Palmar PlateABSTRACT
For comminuted shaft fracture of clavicle, the operative goal, aside from sound bone healing without complications of direct reduction, is maintenance of the original length in order to maintain the normal biomechanics of adjacent joint. Our bridge plating technique utilizing distraction through a lumbar spreader was expected to be effective for restoring clavicular length with soft tissue preservation. However, there are two disadvantages. First, there is more exposure to radiation compared to conventional plating; and second, it is difficult to control the rotational alignment. Despite these disadvantages, our technique has important benefits, in particular, the ability to preserve clavicular length without soft tissue injury around the fracture site.